Insufficient lateral joint laxity after bicruciate-retaining total knee arthroplasty potentially influences kinematics during flexion: A biomechanical cadaveric study

BackgroundSoft tissue balancing in bicruciate-retaining (BCR) total knee arthroplasty (TKA) is a challenge that must be overcome to achieve excellent clinical outcomes. However, the optimal degree of joint laxity has yet to be clarified. This cadaveric study sought to examine joint laxity after BCR TKA using a navigation system.MethodsKnee joint laxity was quantified using an image-free navigation system in 8 intact fresh frozen cadavers under three conditions: the native knee, BCR TKA knee, and BCR TKA knee after anterior cruciate ligament resection. Rotational kinematics in the BCR TKA knee during flexion were compared according to whether joint laxity was increased or decreased.ResultsKnee joint laxity after BCR TKA under varus-valgus movement, anterior translation, and internal-external rotation loadings was similar to that of the native knee. However, lateral joint laxity was decreased during flexion in some cases. BCR TKA-treated knees with decreased lateral joint laxity at 90° of flexion demonstrated more limited tibial internal rotation in deep flexion than the native knee (p < 0.05). The loss of internal rotation in deep flexion was partly recovered by using a lateral insert with a posterior slope of +3°.ConclusionsRestoring optimal joint laxity was not always straightforward in BCR TKA if the 4 ligaments were preserved. Lateral joint laxity was potentially decreased in BCR TKA and may result in kinematic conflict during flexion. Surgeons should be aware of the need to achieve sufficient lateral joint laxity in this type of BCR TKA.     

Under-correction of preoperative varus alignment does not lead to a difference in in-vivo bone loading in 3D-SPECT/CT compared to neutral alignment

BackgroundThe aim was to investigate the correlation of bone tracer uptake (BTU) in SPECT/CT and changes in coronal knee alignment after total knee arthroplasty (TKA). We questioned if undercorrection of preoperative varus alignment leads to a difference in BTU compared to neutral alignment.MethodsConsecutive 66 patients who received SPECT/CT before and after TKA were retrospectively included. Adjusted mechanical alignment was the alignment target. The alignment of the knee was measured on 3D-CT by selecting standardized landmarks. Maximum (mean ± SD) and relative BTU (ratio to the reference) were recorded using a previously validated localization scheme (p < 0.05).ResultsIn the native group, 20 knees were aligned (30.3%) in valgus (HKA > 181.5°), 12 (18.2%) in neutral (178.5°-181.5°) and 34 (51.5%) in varus (HKA < 178°). Overall TKA changed the alignment towards neutral. 48.5% remained in the same groups, whereas 50% of native valgus and 33% of varus knees changed to neutral after TKA. In native varus alignment mean BTU was significantly higher in some medial tibial and femoral regions (fem1ia (p = 0.010), fem1ip (p = 0.002), tib1a.mid (p = 0.005), tib1a.tray (p = 0.000), tib1p.tray (p = 0.000)); in native valgus alignment mean BTU was higher in the corresponding lateral tibial and femoral regions (fem2ip (p = 0.001), tib2a.tray (p = 0.011), tib2p.tray (p = 0.002)). After TKA, a significant decrease in femoral and tibial BTU (femoral preoperative BTU 1.64 +/-0.69; femoral postoperative BTU 0.95 +/-0.42; p = 0.000// tibial preoperative BTU 1.65 +/- 0.93; tibial postoperative BTU 1.16 +/- 0.48; p = 0.000) and an increase in patellar BTU was observed (p = 0.025). Native varus alignment correlated with a higher medial BTU decrease medially. Undercorrection of preoperative varus alignment showed no higher BTU after TKA.ConclusionPreoperative varus alignment correlated with a higher decrease in BTU in specific femoral and tibial medial regions. Preoperative valgus alignment correlated with a higher decrease in the corresponding lateral regions. Undercorrection of preoperative varus alignment did not lead to higher bone loading reflected by BTU after TKA.     

A posterior anchoring method decreases pullout suture translation of the medial meniscus posterior root repair during knee flexion

BackgroundThe medial meniscus (MM) translates posteriorly and extrudes severely from the medial tibial plateau (MTP) during knee flexion in the MM posterior root tear (PRT) knee. Transtibial pullout repair of the MMPRT has been performed to regulate MM extrusion. This study aimed to evaluate pullout suture translation during knee flexion before and after posterior anchoring during pullout repair. We hypothesized that suture translation after posterior anchoring would be significantly decreased relative to that before posterior anchoring.MethodsThirty-five patients who underwent MM posterior root repair were prospectively investigated. Pullout repair was performed using two cinch sutures (outer and inner sutures) and posterior anchoring through the MM posterior horn and an additional bone tunnel on the MTP. The translation of the outer suture from 0° to 90° of knee flexion was measured and compared before and after posterior anchoring intraoperatively. The MM morphologic features were measured using preoperative magnetic resonance imaging, and the correlation between these values and outer suture translation was evaluated.ResultsThe average outer suture translation after posterior anchoring (1.6 ± 1.5 mm) was significantly decreased relative to that before posterior anchoring (2.5 ± 1.7 mm, P < 0.01). No significant correlations were observed between the MM morphological features and outer suture translation.ConclusionsThe posterior anchoring method with an MM posterior root repair is useful in decreasing posterior translation of the pullout suture during knee flexion, which might have an advantage in preventing suture pullout from the repaired MM, leading to good clinical outcomes.     

Prospective sequential comparison of femoral roll-back between cruciate-retaining and posterior-stabilized total knee arthroplasty using an intra-operative sensor

BackgroundImplant design and surgical techniques affect postoperative knee kinematics in total knee arthroplasty (TKA). This study aimed to compare femoral roll-back between cruciate-retaining (CR) and posterior-stabilized (PS) TKA in the same knee by objectively quantifying the contact point kinematics of the tibiofemoral joint using a sensor.MethodsIn the present prospective study, we used an intraoperative sensor to compare medial and lateral roll-back during 0-120° knee flexion in 33 knees that underwent CR and PS TKA. We also examined the relationship between mediolateral balance and the lateral-to-medial roll-back ratio. We defined the contact percentage position as the vertical length to the contact point divided by the anteroposterior length of the tibial plate.ResultsThe roll-back percentage following PS TKA (19.8 ± 5.1%) was significantly higher than that after CR TKA in both the medial (19.8 ± 5.1% versus 7.1 ± 2.5%, P < 0.001) and lateral (26.8% ± 3.8% versus 18.7 ± 3.8%, P < 0.001) compartments. The medial contact pressure at 90° was significantly correlated with the increased lateral-to-medial roll-back ratio in both CR and PS TKA (both P < 0.001).ConclusionPS TKA resulted in a higher percentage of femoral roll-back in the medial and lateral compartments than CR TKA. CR TKA caused a higher lateral-to-medial roll-back ratio compared to PS TKA. To reproduce medial pivot knee motion similar to that of a normal knee, the medial soft tissue needed to be balanced more tightly than the lateral soft tissue during TKA. These findings provide some clinical evidence of TKA design selection and proper mediolateral balancing for successful TKA.     

The medial gap is a reliable indicator for intraoperative soft tissue balancing in posterior-stabilized total knee arthroplasty

BackgroundAppropriate soft tissue balance and accurate alignment are important for successful total knee arthroplasty (TKA). However, the optimal technique for establishing and measuring soft tissue balancing remains unclear. The aim of this study was to analyze the intraoperative medial and lateral gap pattern using digital knee balancer in posterior-stabilized (PS) TKA.MethodsThis study involved 55 patients with medial osteoarthritis who underwent a primary TKA using an image-free navigation system. The extension gap and the flexion gap at 90° knee flexion were assessed using an offset seesaw-type digital balancer. Continuous joint distraction force from 10 lb to 60 lb was applied. Medial gap, lateral gap, and varus angle were measured.ResultsThe medial bone gap difference between extension and flexion was constant regardless of the distraction force from 20 lb to 60 lb. The lateral bone gap was significantly greater than the medial bone gap in extension and flexion from 30 lb to 60 lb (P < 0.05). The varus angle changed depending on the distraction force, especially in flexion. The varus angle in flexion was significantly greater than that in extension from 40 lb to 60 lb (P < 0.05).ConclusionsThe medial bone gap is a reliable indicator unaffected by the distraction force during surgery and is useful for adjusting the medial gap in extension and flexion appropriately to ensure medial stability in PS-TKA. The digital knee balancer and navigation system support both precise gap assessment and surgery.     

CR-lipped bearing is an adequate functional solution to patients with perioperative excessive laxity in cruciate retaining total knee arthroplasty

BackgroundThe cruciate retaining lipped (CR-lipped) bearing is designed to provide more anterior-posterior (AP) stability and could be employed to resolve excessive intraoperative laxity during the cruciate retaining TKA (CR-TKA). The aim of the study was to determine whether the CR-lipped bearing in CR-TKAs with a perioperative excessive laxity allows equivalent functional results as compared to the standard CR articulation.MethodsA cohort of 111 TKAs with CR-lipped bearings was matched to a cohort of conventional CR bearings regarding age and sex. The CR-lipped bearing was used in patients with excessive knee AP laxity and the regular CR bearing was used in patients without excessive AP laxity during TKA. Various PROMs (WOMAC, KSS, SF-36) were assessed preoperatively and at 5-years postoperative in combination with revision rate and Range of Motion (ROM).ResultsPROMs did not differ significantly between both groups 5-years postoperatively. Mean ROM (flexion) 5-years postoperatively was not significantly different. The implant survivorship was 100% for both cohorts with revision for any reason as end point.ConclusionBased on these results, the CR-lipped bearing is a safe and effective solution for mild interoperatively assessed PCL laxity during CR-TKA without loss of function or decreased survivorship at 5 years. Peroperative conversion to a PS-TKA in order to obtain satisfactory functional scores might therefore not be necessary when mild PCL laxity is observed during surgery. Further research should focus on verifying this approach and longer follow-up is needed to generate data on long term survivorship.Level of evidenceLevel IV therapeutic, retrospective, cohort study.     

Preoperative morphologic changes of the medial meniscus correlate with suture translations during knee flexion in pullout repair of medial meniscus posterior root tear

BackgroundMedial meniscus (MM) translates and extrudes posteriorly during knee flexion in MM posterior root tear (MMPRT) knees, and transtibial pullout repair of MMPRT has been performed to regulate the MM extrusion. This study aimed to calculate each suture translation during knee flexion in transtibial pullout repair of MMPRT, and to investigate the morphologic features of the MM that lead to longer suture translations during knee flexion.MethodsThirty patients with MMPRT who met the operative indication of pullout repair were enrolled and investigated prospectively. Pullout repair was performed by using two simple stitches (outer and inner sutures) and an all-inside suture in the posteromedial part of the MM. Each suture’s translation from 0° to 90° of knee flexion was measured intraoperatively. The MM morphologic features, including MM medial extrusion (MMME) and MM posterior height (MMPH), were measured using preoperative magnetic resonance imaging, and the correlation between these values and each suture translation was evaluated.ResultsThe average outer, inner, and all-inside suture translations were 4.8 mm, 3.9 mm, and 1.3 mm, respectively. Significant correlations were observed between the outer suture translation and MMME, and MMPH (p < 0.001 and <0.01, respectively). The thresholds for preoperative MMME and MMPH for longer outer suture translations (≥6 mm) were 2.1 mm and 5.4 mm, respectively.ConclusionsPreoperative longer MMME and higher MMPH were associated with longer meniscus translations during knee flexion during MMPRT repair.     

Modern femoral component design in total knee arthroplasty shows a lower patellar contact force during knee flexion compared with its predecessor

BackgroundThe relationship between the femoral component design in total knee arthroplasty (TKA) and the patellofemoral contact force, as well as the soft tissue balance, has not been well reported thus far.MethodsTwenty-eight mobile-bearing posterior-stabilized (PS) TKAs using the traditional model (PFC Sigma) and 27 mobile-bearing PS TKAs using the latest model (Attune) were included. Surgeries were performed using the measured resection technique assisted with the computed tomography (CT)-based free-hand navigation system. After all the trial components were placed, patellar contact forces on the medial and lateral sides were measured using two uniaxial ultrathin force transducers with the knee at 0°, 10°, 30°, 60°, 90°, 120°, and 135° of flexion. The joint component gap and the varus ligament balance of the femorotibial joint were also measured. The non-paired Student’s t-test was conducted to compare the values of the two groups.ResultsThe medial patellar contact force was significantly lower for Attune group than for PFC Sigma group at 120° of knee flexion (P = 0.0058). The lateral patellar contact force was also significantly lower for Attune group than PFC Sigma group at 120° and 135° of knee flexion (P = 0.0068 and P = 0.036). The joint component gap, as well as the varus ligament balance, showed no statistically significant difference between the two groups.ConclusionsReduced thickness and width of the anterior flange of the femoral component in the Attune may play a role in low patellar contact force.     

The effects of initial graft tension on femorotibial relationship following anatomical rectangular tunnel anterior cruciate ligament reconstruction using bone–patellar tendon–bone graft

BackgroundThe purpose of this study was to elucidate the effects of the difference of initial graft tension on the femorotibial relationship on an axial plane and its chronological change following anatomical anterior cruciate ligament (ACL) reconstruction.MethodsA total of 63 patients who underwent anatomical ACL reconstruction were included in this study. The graft was fixed at full knee extension with manual maximum (higher graft tension; group H) and 80 N (lower graft tension; group L) pulls in 31 and 32 patients, respectively. The femorotibial positional relationship in axial computed tomography at 1 week and 1 year postoperatively were retrospectively evaluated. The side-to-side differences (SSDs) and the amount of changes of SSDs over 1 year were compared between groups.ResultsThe SSDs of the external rotational angle of the tibia in group H were significantly larger than those in group L at postoperative 1 week (2.7 ± 3.9° vs. 0.3 ± 3.3°; P < 0.01). The amount of internal rotational changes of SSDs of the internal–external rotational angles over 1 year in group H was significantly larger than that in group L (−3.6 ± 3.9° vs. − 0.3 ± 2.7°; P < 0.01). No significant differences were observed on the anterior–posterior translation distance and medial–lateral shift distance.ConclusionThe application of higher initial graft tension resulted in excessive external rotation of the tibia to the femur at 1 week postoperatively in anatomical ACL reconstruction, and the excessive early external tibial rotation had resolved over 1 year.     

Erratum to “Greater postoperative relatively medial loose gap at 90° of flexion for varus knees improves patient-reported outcome measurements in anatomical bi-cruciate retaining total knee arthroplasty” [The Knee 27(5) (2020) 1534–1541]”

BackgroundThe purpose of the present study was to measure the intraoperative joint gap using tensor device and pre- and, postoperative joint stability at 0, 30 and 90° of flexion using stress radiography and to identify whether these factors influence patient-reported outcome measurement (PROM) in anatomical bi-cruciate retaining (BCR) knee arthroplasty (TKA).MethodsFifty-three knees with preoperative varus osteoarthritis of the knee underwent anatomical BCR TKA with oblique 3° angle femorotibial joint line. The intraoperative medial and lateral joint gap using a tensor device and gap difference (lateral minus medial; varus laxity) were also calculated. Postoperative joint stability was measured using stress radiographs. PROM was also evaluated at 1.5 years postoperatively. The effect of intraoperative and postoperative joint stabilities on PROMs were analyzed using Spearman’s rank correlation analysis.ResultsIntraoperative greater difference between medial joint gap at 140° and 0° of flexion showed significant positive correlation with postoperative function of patellofemoral joint. Intraoperative varus laxity at extension improved postoperative symptoms in 2011 Knee Society Score (2011 KSS); greater postoperative lateral stability at 30 and 90° of flexion with the varus stress test was associated with the better patient expectation in 2011 KSS. Postoperative medial laxity at 90° of flexion with the valgus stress test positively correlated with the patient expectation and satisfaction in 2011 KSS.ConclusionSurgeons should notice that the postoperative lateral stability and medial laxity at 90° of flexion improved PROM in anatomical BCR TKA.     

Comparison of intraoperative soft tissue balance measurement between two tensor systems in total knee arthroplasty

BackgroundDifferences in measurement outcomes using different tensors in total knee arthroplasty (TKA) remain unknown. This study aimed to compare intraoperative soft tissue balance between two measurement systems in TKA.MethodsThis study included 24 cruciate-retaining (CR) and 27 posterior-stabilized (PS) TKAs for varus-type osteoarthritis. All TKAs were performed with the measured resection technique. Intraoperative soft tissue balance was assessed with femoral component placement and patellofemoral joint reduction throughout the range of motion. Measurements were performed using the Offset Repo-Tensor (Zimmer) and Ligament Sensor Tensor (Depuy). Joint component gaps and varus/valgus ligament balance were compared statistically in CR and PS TKAs.ResultsJoint component gaps with the Offset Repo-Tensor were significantly larger at 0°, 10°, 30°, and 60° of knee flexion in CR TKA and at all knee flexion angles, except 0° and 135°, in PS TKA than those with the Ligament Sensor Tensor (P < .05). Varus balance with the Offset Repo-Tensor was significantly larger at 0°, 10°, and 30° of knee flexion in CR TKA and at 10°, 30°, 60°, 90°, and 120° of knee flexion in PS TKA than that with the Ligament Sensor Tensor (P < .05).ConclusionSurgeons should consider the discrepancy in assessing intraoperative soft tissue balance depending on the tensor used. The Ligament Sensor Tensor tended to underestimate soft tissue balance in CR and PS TKAs compared with the Offset Repo-Tensor, especially in PS TKA. Thus, surgeons should know the difference in values between the offset-type tensor with consistent distraction force and a spring-loaded tensor.     

Effect of ultrasound-guided selective sensory nerve blockade of the knee on pain management compared with periarticular injection for patients undergoing total knee arthroplasty: A prospective randomized controlled trial

BackgroundUltrasound-guided selective sensory nerve blockade (SSNB) of the knee, including an adductor canal block (ACB), anterior femoral cutaneous nerve block, and infiltration between the popliteal artery and posterior capsule of the knee may provide effective motor-sparing knee analgesia for total knee arthroplasty (TKA). We hypothesized that the SSNB would manage pain better on ambulation 24 hours postoperatively compared to periarticular infiltration (PAI), when combined with postoperative continuous ACB.MethodsSeventy-two patients undergoing elective TKA under spinal anesthesia were randomly assigned to either SSNB (SSNB group) or intraoperative PAI (PAI group). All patients received postoperative multimodal analgesia, including continuous ACB. The primary outcome was pain on ambulation 24 hours postoperatively. Secondary outcomes included rest and dynamic numerical rating scale pain score, intravenous morphine requirement, functional performance measures, adverse events, satisfaction, and length of stay.ResultsThere was no difference in pain score during movement between the groups (mean difference −0.48 [−1.38 to 0.42], p = 0.3) and other immediate overall pain scores 24 hours postoperatively. Patients in the SSNB group had significantly lower intravenous morphine requirement than the PAI group for 48 hours postoperatively (0 [0, 0] vs. 0 [0, 2]; p = 0.008). There was no intergroup difference in the performance-based measures, satisfaction, and length of stay.ConclusionsThe SSNB did not provide superior postoperative analgesia, or improvement in immediate functional performance. However, it may result in lower opioid consumption postoperatively when compared with the intraoperative PAI.     

Interactive effect of femoral posterior condylar offset and tibial posterior slope on knee flexion in posterior cruciate ligament-substituting total knee arthroplasty

Background

This work aimed to evaluate the changes in the femoral posterior condylar offset (PCO) and tibial slope after posterior cruciate ligament (PCL)-substituting total knee arthroplasty (TKA), and to address the presence of any interactive effect between the two on knee flexion.

Is it possible to predict the final component gap in flexion before femoral posterior condylar osteotomy in cruciate-retaining and posterior-stabilized total knee arthroplasty?

BackgroundIn total knee arthroplasty (TKA) with posterior condylar osteotomy using anatomical landmarks, predicting the final flexion gap is impossible, as it differs with the presence or absence of the posterior cruciate ligament. We compared the predicted flexion gap, based on pre-femoral posterior condylar osteotomy measurements, with the postsurgical final flexion gap in cruciate-retaining (CR) and posterior-stabilized (PS) TKA.MethodsOne hundred knees of patients with osteoarthritis were included: 35 underwent CR, and 65 PS TKA. Distal femoral and proximal tibial osteotomy using the measured resection technique was performed. An anterior and posterior femoral osteotomy guide was set parallel to the surgical epicondylar axis, and the predicted flexion gap was measured using a seesaw tensor attached to the guide. After all procedures, the final component gap in flexion was measured using a similar seesaw tensor at the patella reduction position and was compared with the predicted gap.ResultsThe correlation coefficients for predicted vs. final component gap were 0.45 (P < 0.05) in CR and 0.82 (P < 0.001) in PS. The mean differences between predicted and final gaps were 1.8 mm for CR and 1.0 mm for PS. In 34.3% of CR cases, the gap difference was more than 2 mm.ConclusionIt is possible to predict the final flexion gap before femoral posterior condylar osteotomy, with a strong correlation observed between predicted and final component gaps in PS TKA. However, in CR, more than 30% of the cases showed unexpectedly large final flexion gaps.     

Approximately 80% of Japanese osteoarthritic patients fall out of the safety range in restricted kinematically-aligned total knee arthroplasty in an analysis of preoperative long-leg radiograms

BackgroundRestricted kinematically-aligned total knee arthroplasty (KA-TKA) is a reasonable modification to avoid the alignment outlier that may cause implant failure. However, despite a noted high incidence of constitutional varus in Japanese individuals, there has been no investigation into how many knees require the restriction in restricted KA-TKA (RKA-TKA) among Japanese patients. Therefore, we conducted a study using preoperative long-leg radiograms.MethodsWe studied long-leg radiographs of 228 knees in 114 consecutive patients. The numbers of knees within the safety range and their corrective osteotomy angle in the restriction algorithms advocated by Almaawi et al. (2017) and MacDessi et al. (2020) were evaluated.ResultsAccording to the algorithms used by Almaawi et al. and MacDessi et al., out of 228 knees, 46 (20%) and 39 (17%) fell within the safety range, respectively. The mean correction angles of the hip-knee-ankle angle, lateral distal femoral angle and medial proximal tibial angle were 2.8 ± 3.4°, 0.4 ± 1.4° and 2.4 ± 2.8° in the algorithm used by Almaawi et al., while they were −4.9 ± 4.7°, 1.1 ± 2.5° and −6.0 ± 3.4° in the algorithm used by MacDessi et al. Most of the knees needed to be restricted in order to perform RKA-TKA, regardless of the algorithm used.ConclusionsBased on a preoperative analysis of long-leg radiograms in a Japanese population, most knees fall out of the safety range in RKA-TKA. Surgeons must consider whether to allow component outlier or to perform corrective osteotomy that likely requires soft tissue release.     

Comparison of the biomechanical effect of posterior condylar offset and kinematics between posterior cruciate-retaining and posterior-stabilized total knee arthroplasty

Background

The effect of the changes in the femoral posterior condylar offset (PCO) on anterior–posterior (AP) translation and internal–external (IE) rotation in cruciate-retaining (CR) and posterior-stabilized (PS) total knee arthroplasty (TKA) remains unknown. The purpose of this study was to compare the kinematics in CR and PS TKA with respect to the difference in prosthetic design and PCO change through a computational simulation.

Navigation-based analysis of associations between intraoperative joint gap and mediolateral laxity in total knee arthroplasty

BackgroundNo data have demonstrated how joint gap measured under a distraction force is actually associated with mediolateral laxity evaluated under a varus–valgus force during total knee arthroplasty (TKA). This study aimed to investigate the correlations between them using a navigation system.MethodsA total of 113 primary navigated TKAs were included. After bone resection and soft-tissue balancing, the component gap was measured with a distraction force of 60 N and 80 N for both the medial and lateral compartment (i.e. a total of 120 N and 160 N) at 0°, 10°, 30°, 60°, 90°, and 120° knee flexion. After the final prosthetic implantation and capsule closure, mediolateral laxity under a maximum varus–valgus stress was recorded with image-free navigation at each knee flexion angle. The correlation between joint gap laxity (total differences between component gap and insert thickness in the medial and lateral compartment) and mediolateral laxity was analyzed using Spearman’s rank correlation coefficient.ResultsThe joint gap laxity under both distraction forces showed significant positive correlations with mediolateral laxity at 10°, 30°, 60°, and 90° flexion, whereas no correlation was observed at extension and 120° flexion. The correlations were stronger in gap measurement under 80 N than 60 N at all examined ranges. In patients with body mass indexes (BMIs) ≥ 30 kg/m², the correlation became non-significant.ConclusionIntraoperative joint gap laxity was associated with mediolateral laxity after TKA, especially at mid-flexion angles. The factors weakening the correlations were a lower applied distraction force for gap measurement and a larger BMI.     

Assessment of popliteal neurovascular safety during all-inside suturing of the posterior horn of the lateral meniscus using Upright MRIs of the knee joint

BackgroundTo examine the risk of injury to the popliteal neurovascular bundle (pNVB) during all-inside repair of the posterior horn of the lateral meniscus (PHLM) using Upright-MRIs.MethodsUpright-MRIs of 61 knees in extension (ext) and 90°-flexion (flex) were included. Distance D from the PHLM to the pNVB was compared between extended and 90°-flexed position, subgroups with/without joint-effusion and evaluated according to demographics. Portal safety was assessed simulating suturing of the PHLM via four arthroscopy portals. Distance d (shortest space from the simulated suturing-device trajectory lines to the pNVB) was compared among portals in increasing distances from the posterior cruciate ligament (PCL).ResultsD is longer in flex (17.3 ± 6.0 mm) than in ext (11.3 ± 4.2 mm, p < 0.0001). MRIs with joint-effusion displayed longer values of D than scans without joint-effusion (flex: 20.4 ± 7.1 mm vs. 16.1 ± 5.2 mm, p = 0.012). Shorter distances are associated with female gender, lower body weight and lower BMI. At 0 mm from the PCL, the 1 cm-lateral portal was the safest (p < 0.0001) whereas at 3 mm/6mm/9mm/12 mm the 1 cm-medial portal showed the longest d values (p < 0.0001 each).ConclusionAll-inside suturing of the PHLM is safer in 90°-flexion, in presence of intraarticular fluid and in male patients with increasing weight/BMI. Sutures of the PHLM at 0 mm from the PCL are safer from a 1 cm-lateral portal whereas for tears located ≥ 3 mm from the PCL a 1 cm-medial portal involves a lower neurovascular risk. Upright-MRI proves excellent for preoperative planning to minimize neurovascular risks.     

Usefulness of gait parameters obtained from inertial sensors attached to the lower trunk and foot for assessment of gait performance in the early postoperative period after total knee arthroplasty

BackgroundThis study was performed to (i) compare gait parameters obtained from inertial sensors attached to the lower trunk and foot between patients in the early postoperative period after total knee arthroplasty (TKA) and healthy age- and sex-matched controls and (ii) elucidate the association between the gait parameters and patient-reported outcome measures (PROMs).MethodThe gait performance of 19 patients who had undergone TKA was assessed using inertial sensors and PROMs obtained from the Knee Injury and Osteoarthritis Outcome Score (KOOS) 1 week before hospital discharge. The patients walked along a 15-m walkway and we calculated the following gait parameters: walking speed, coefficient of variation (CV) of stride time, unbiased autocorrelation coefficient (AC), harmonic ratio (HR), and symmetry index (SI). The same gait parameter data from 19 age- and sex-matched healthy adults (controls) were obtained from our past study.ResultsThe TKA group demonstrated slower walking speed, larger CV of stride time, lower HR in all three directions, lower AC in the vertical direction, and higher SI in the vertical direction than the healthy control group (all p < 0.05). Correlation analysis revealed that the SI in the anteroposterior direction was significantly correlated with the KOOS symptoms subscore and ADL subscore (p < 0.05).ConclusionsPatients in the early postoperative period after TKA exhibited worse gait performance as assessed by inertial sensors compared with healthy controls. Gait symmetry was correlated with PROMs. These results indicate the usefulness of assessing gait parameters after TKA.     

Predictors of patient satisfaction after primary hamstring anterior cruciate ligament reconstruction

BackgroundPredictors of patient satisfaction (PS) after anterior cruciate ligament (ACL) reconstruction are not well known. This study investigated predictors of PS and whether PS was associated with pre-injury level of sport participation, patient reported knee function and quality of life after ACL reconstruction.MethodsPatients who underwent primary hamstring ACL reconstruction between January 2015 and December 2017 were retrospectively evaluated. An online survey was used to evaluate PS (yes = satisfied, no = unsatisfied), duration of supervised postoperative rehabilitation, timing of return to pre-injury level of sport, pre-injury level of sport participation, patient reported knee function and quality of life. Preoperative, operative and postoperative variables were collected from the medical records.ResultsA total of 183 patients completed the survey at a median of 3.6 (1.5) years after ACL surgery. At final follow-up, 82% of patients were satisfied with the outcome. Preoperative (e.g. age) and operative (e.g. meniscal tear) variables were not predictors of PS (p > 0.05). Duration of supervised postoperative rehabilitation, timing of return to pre-injury level of sport and postoperative ACL injury were predictors of PS (p = 0.018, p = 0.016 and p < 0.001, respectively). Pre-injury level of sport participation was significantly higher in satisfied compared to unsatisfied patients: 44.7% (n = 67) versus 18.2% (n = 6) (p = 0.005). In addition, satisfied patients reported significantly higher patient reported knee function and quality of life compared to unsatisfied patients (p < 0.001).ConclusionThis study provided data on predictors of PS after primary ACL reconstruction. Furthermore, PS was associated with pre-injury level of sport participation, patient reported knee function and quality of life.