Development and validation of discriminating method of dissolution for fosamprenavir tablets based on in vivo data

The aim of this work is to develop and validate a dissolution test for fosamprenavir tablets (Telzir^®) based on in vivo data. The appropriate conditions were determined after testing sink conditions in dissolution medium, rotation speed and stability of the drug. In vivo release profiles were obtained from the literature. The fraction (and percentage) of dose absorbed (FA) was calculated by deconvolution, using the Wagner–Nelson method. For this formulation, the best dissolution conditions were achieved using a USP apparatus 1 900 ml of medium containing HCl 0.01 M at a rotation speed of 75 rpm. Under these conditions a significant linear relationship between fraction of drug absorbed versus dissolved was obtained (R² = 0.984) and a level-A IVIVC was established. The in vitro dissolution samples were analyzed using a HPLC method and the validation was performed according to USP protocol. The method showed accuracy, precision, linearity and specificity within the acceptable range. The discriminatory power of the dissolution method was challenged. The kinetics of dissolution was determined using model-dependent methods. The dissolution profiles were best described by the Hixson–Crowell model. The dissolution test was validated and could be applied to evaluate the dissolution profile of fosamprenavir tablets.     

Development and validation of dissolution test for ritonavir soft gelatin capsules based on in vivo data

The purpose of the study was to develop and validate a dissolution procedure for ritonavir soft gelatin capsules (Norvir) based on in vivo data. Several conditions such as medium composition, pH, surfactant concentration and rotation speed were evaluated. The method was carried out using the same batch of Norvir used in a bioequivalence study and the in vivo data were used to select the best dissolution test conditions based on in vitro-in vivo correlation (IVIVC). The dissolution test was validated using a high-performance liquid chromatographic method (HPLC). For this formulation, the best dissolution conditions were achieved using paddle, 900ml of medium containing water with 0.7% (w/v) of sodium lauryl sulfate at a rotation speed of 25rpm. Under these conditions a significant linear relationship between fraction of ritonavir absorbed and dissolved was obtained (R(2)=0.993) and a level A IVIVC was established. In the HPLC method a relative standard deviation for intra-day precision was <1.6% and for inter-day precision was <1.4%. Accuracy was from 98.5% to 101.6% over the concentration range required for the dissolution test (4.0-124.0microg/ml). Both the HPLC method and the dissolution test are validated and could be used to evaluate the dissolution profile of ritonavir soft gelatin capsules.     

Development and in vitro/in vivo Evaluation of a Silastic Intravaginal Ring for Mifepristone Delivery

Preparation and in vitro/in vivo evaluation of mifepristone intravaginal ring formulations were investigated. In the present study, it is reported that a mifepristone intravaginal ring of reservoir design comprising of a mifepristone silicone elastomer core enclosed in a silicone layer. During the preparation of intravaginal ring solid dispersion method was employed which improved the release rate of drug from the intravaginal ring. In vitro release studies performed under sink conditions and the released drug amounts were estimated using UV spectrometry at 310 nm. In addition, the in vivo release profile of in-house devices was evaluated in female New Zealand white rabbits. The rabbit plasma samples were processed and analyzed using a validated HPLC-MS method. Norgestrel was used as internal standard, and plasma samples contained mifepristone and internal standard were deproteinized, and then subjected to HPLC-MS analysis under condition of electrospray ionization in the selected ion monitoring mode. The drug release from intravaginal ring made in house was constant for 21 days in rabbits, which suggested the mifepristone intravaginal ring release system would be useful in clinical practice in the future. The result indicated the in vitro/in vivo correlation is perfect, which explained in vitro release analysis method developed was feasible.     

In vitro-in vivo correlation and bioavailability studies of captopril from novel controlled release donut shaped tablet

A controlled release formulation of captopril which was coated and fabricated into a donut shaped tablet formulation, was investigated in rabbit for pharmacokinetic and in vitro-in vivo correlation studies. Coated donut shaped tablets were prepared and in vitro release was studied in simulated gastric fluid at three different RPMs. New Zealand albino male rabbits have been used as animal model for in vivo study. A sensitive and simple HPLC method was developed for the determination of captopril content in rabbit plasma. In vitro release studies showed that release patterns followed zero order for around 4 h. Single oral administration of coated donut shaped tablets in rabbit illustrated retained availability of captopril to the injected drug. Captopril content could pursue the same release pattern over the same time course in in vivo study. The in vivo-in vitro correlation coefficients obtained from point-to-point analysis were greater than 99% between concentrations at certain time points obtained from release study in simulated gastric fluid at different RPMs and HPLC analysis of rabbit's plasma. From the in vitro-in vivo correlation prediction it was evident that the coated donut shaped tablet is a good device for controlled delivery of captopril.     

Review on in vivo and in vitro methods evaluation of antioxidant activity

A good number of abstracts and research articles (in total 74) published, so far, for evaluating antioxidant activity of various samples of research interest were gone through where 407 methods were come across, which were repeated from 29 different methods. These were classified as in vitro and in vivo methods. And those are described and discussed below in this review article. In the later part of this review article, frequency of in vitro as well as in vivo methods is analyzed with a bar diagram. Solvents are important for extracting antioxidants from natural sources. Frequency of solvents used for extraction is also portrayed and the results are discussed in this article. As per this review there are 19 in vitro methods and 10 in vivo methods that are being used for the evaluation of antioxidant activity of the sample of interest. DPPH method was found to be used mostly for the in vitro antioxidant activity evaluation purpose while LPO was found as mostly used in vivo antioxidant assay. Ethanol was with the highest frequency as solvent for extraction purpose.     

In situ formed phase transited drug delivery system of ketoprofen for achieving osmotic, controlled and level a in vitro in vivo correlation

A dry process induced phase transited, non disintegrating, controlled release, in situ formed asymmetric membrane capsular system for poorly water soluble drug, ketoprofen, was developed and evaluated both in vitro and in vivo for osmotic and controlled release of the drug. In situ formed asymmetric membrane capsules were prepared using fabricated glass capsule holders via dry, phase inversion process. Effect of varying osmotic pressure of the dissolution medium on drug release was studied. Membrane characterization by scanning electron microscopy showed an outer dense region with less pores and an inner porous region for the prepared asymmetric membrane. In vitro release studies and statistical test for all the prepared and marketed formulation were done at P >0.05. The drug release was found to be independent of the pH, but dependent on the osmotic pressure of the dissolution medium. In vivo pharmacokinetic studies showed a level A correlation (R(2)>0.99) with 39.24 % relative bioavailability compared to immediate release tablet of ketoprofen. Excellent correlation achieved suggested that the in vivo performance of the phase transited in situ formed AMCs could be accurately predicted from their in vitro release profiles and could a means for controlled delivery of drugs with varying solubility.     

Development of a predictive in vitro dissolution for clarithromycin granular suspension based on in vitro-in vivo correlations

The objective of this study was to evaluate the in vitro behavior of different clarithromycin granular suspensions based on a developed in vitro-in vivo correlation model, using one reference and two test formulations. In vitro release rate data were obtained for each product using the USP apparatus II, operated at 50?rpm under different pH conditions. The dissolution efficiency was used to analyze the dissolution data. In vivo study was performed on six healthy male volunteers under fasting condition. Correlation was made between in vitro release and in vivo absorption. A linear model was developed using percent absorbed data versus percent dissolved data from the three products. Dissolution condition of 0.1N HCl for 1?h and then phosphate buffer at pH 6.8 was found to be the most discriminating dissolution method. Rate of absorption for the reference as estimated by Wagner-Nelson deconvolution was correlated with in vitro release with a correlation coefficient of 0.99. The in vivo results for the two test products were compared to the predicted values using the reference model with a correlation coefficient of 0.94. Furthermore, multiple level C correlations were obtained for some pharmacokinetic parameters with the corresponding in vitro kinetic parameters with correlation coefficients exceeding 0.90. Moreover, the interpretation of the in vitro and in vivo data with reference to formulations was discussed.     

Lipid-based formulations for oral administration of poorly water-soluble drugs

Lipid-based drug delivery systems have shown great potentials in oral delivery of poorly water-soluble drugs, primarily for lipophilic drugs, with several successfully marketed products. Pre-dissolving drugs in lipids, surfactants, or mixtures of lipids and surfactants omits the dissolving/dissolution step, which is a potential rate limiting factor for oral absorption of poorly water-soluble drugs. Lipids not only vary in structures and physiochemical properties, but also in their digestibility and absorption pathway; therefore selection of lipid excipients and dosage form has a pronounced effect on the biopharmaceutical aspects of drug absorption and distribution both in vitro and in vivo. The aim of this review is to provide an overview of the different lipid-based dosage forms from a biopharmaceutical point of view and to describe effects of lipid dosage forms and lipid excipients on drug solubility, absorption and distribution.     

Application of toxicogenomic tools in the drug research and development process

The cost for the development of new active and safe drugs is higher than ever and continues to increase. At the same time, both the pharmaceutical industry and the Regulatory Authorities are, despite the increasing effort to develop safer drugs, concerned by the risk of unexpected side effects observed in the late steps of the development of new drugs, either in late clinical development or after marketing approval. Then, the early knowledge of any potential toxic effect of a new drug is a key issue to allow adequate decision making. This means that current approaches based on the determination of the No-Adverse-Effect-Level and the Human-Equivalent-Dose are far from being perfect, and fail mainly to detect toxic phenomena of low intensity and/or low frequency. To improve the predictability of the existing experimental models, Toxicogenomics could be included into the in vitro candidate-selection steps and/or during the regulatory preclinical (or clinical) studies.     

Development and validation of a dissolution method for warfarin sodium and aspirin combination tablets

A dissolution method for warfarin sodium-aspirin combination tablets was developed which utilizes USP Apparatus 1 (baskets) at 50 rpm with 900 ml of phosphate buffer (pH 6.8; 0.05 M) medium at 37°C. A reversed-phase liquid chromatographic method was also developed for the simultaneous determination of warfarin sodium, aspirin and salicylic acid on an octadecylsilica column using acetonitrile-tetrahydrofuran-glacial acetic acid-water (23:5:5:67, v/v/v/v) as the mobile phase with UV detection at 282 nm. Validation data were obtained which demonstrate that the dissolution methodology is accurate, precise, linear and rugged for the combination tablets.     

“ToxRTool”, a new tool to assess the reliability of toxicological data

Evaluation of the reliability of toxicological data is of key importance for regulatory decision-making. In particular, the new EU Regulations concerning the registration, evaluation, authorisation and restriction of chemicals (REACH) and classification, labelling and packaging (CLP) according to the new globally harmonised system (GHS) rely on the integration of all available toxicological information. The so-called Klimisch categories, although well established and widely used, lack detailed criteria for assigning data quality to categories. A software-based tool (ToxRTool) was developed within the context of a project funded by the European Commission to provide comprehensive criteria and guidance for reliability evaluations of toxicological data. It is applicable to various types of experimental data, endpoints and studies (study reports, peer-reviewed publications) and leads to the assignment to Klimisch categories 1, 2 or 3. The tool aims to increase transparency and to harmonise approaches of reliability assessment. The tool consists of two parts, one to evaluate in vivo and one to evaluate in vitro data. The prototypes of the tool were tested in two independent inter-rater experiments. This approach allowed the analysis of the performance of the tool in practice and the identification and minimisation of sources of heterogeneity in evaluation results. The final version, ToxRTool, is publicly available for testing and use.     

Use of conventional surfactant media as surrogates for FaSSIF in simulating in vivo dissolution of BCS class II drugs

The usefulness of selected conventional surfactant media to enhance dissolution of BCS class II drugs similarly to fasted state simulated intestinal fluid (FaSSIF) and to predict the absorption of drugs in vivo was evaluated. Dissolution behavior of danazol (Danol®), spironolactone (Spiridon®) and N74 (phase I compound) was compared between FaSSIF, containing physiological levels of sodium taurocholate (STC) and lecithin, and dissolution media containing various concentrations of anionic surfactant, sodium lauryl sulfate (SLS) or non-ionic surfactant, polysorbate (Tween) 80. Although these media differed largely in their solubilization ability, micelle size, diffusivity and surface tension, similar dissolution enhancing levels were achieved between FaSSIF and drug-specific concentrations of conventional surfactants. The dissolution enhancement was shown, however, to be important only for danazol and N74, molecules that are characterized by high hydrophobicity. An in vivo pharmacokinetic dog study was carried out with N74. Comparison of observed plasma profiles with simulated profiles obtained using compartmental absorption and transit model (CAT) indicated that 0.1% SLS medium was the best to predict in vivo plasma profiles and pharmacokinetic parameters (C_max and AUC). This study demonstrates the potential of substituting FaSSIF with more simple and cost-effective conventional surfactant media. Use of in vivo prognostic amounts of synthetic surfactants in dissolution testing could largely assist in industrial drug development as well as in quality control purposes.     

In vitro and in vivo oxidative metabolism and glucuronidation of anastrozole

AIMS

Little information is available regarding the metabolic routes of anastrozole and the specific enzymes involved. We characterized anastrozole oxidative and conjugation metabolism in vitro and in vivo.

METHODS

A sensitive LC-MS/MS method was developed to measure anastrozole and its metabolites in vitro and in vivo. Anastrozole metabolism was characterized using human liver microsomes (HLMs), expressed cytochrome P450s (CYPs) and UDP-glucuronosyltransferases (UGTs).

RESULTS

Hydroxyanastrozole and anastrozole glucuronide were identified as the main oxidative and conjugated metabolites of anastrozole in vitro, respectively. Formation of hydroxyanastrozole from anastrozole was markedly inhibited by CYP3A selective chemical inhibitors (by >90%) and significantly correlated with CYP3A activity in a panel of HLMs (r = 0.96, P = 0.0005) and mainly catalyzed by expressed CYP3A4 and CYP3A5. The K_m values obtained from HLMs were also close to those from CYP3A4 and CYP3A5. Formation of anastrozole glucuronide in a bank of HLMs was correlated strongly with imipramine N-glucuronide, a marker of UGT1A4 (r = 0.72, P < 0.0001), while expressed UGT1A4 catalyzed its formation at the highest rate. Hydroxyanastrozole (mainly as a glucuronide) and anastrozole were quantified in plasma of breast cancer patients taking anastrozole (1 mg day⁻¹); anastrozole glucuronide was less apparent.

CONCLUSION

Anastrozole is oxidized to hydroxyanastrozole mainly by CYP3A4 (and to some extent by CYP3A5 and CYP2C8). Once formed, this metabolite undergoes glucuronidation. Variable activity of CYP3A4 (and probably UGT1A4), possibly due to genetic polymorphisms and drug interactions, may alter anastrozole disposition and its effects in vivo.     

Synthesis, in vitro and in vivo antifungal activity of 5-phenylthio-2,4-bisbenzyloxypyrimidine: a novel nucleobase

A pyrimidne nucleobase, 5-phenylthio-2,4-bisbenzyloxypyrimidine and its analogs were synthesized and scanned for in vitro antifungal activity using cup-plate and macrobroth dilution method against Candida albicans, Aspergillus niger, Aspergillus flavus and Aspergllus fumigatus. In the cup-plate method, 5-phenylthio-2,4-bisbenzyloxypyrimidine showed very good antifungal activity compared to clotrimazole at the concentrations of 100 and 1000 μg/ml and in the macrobroth dilution method, it showed comparable activity with respect to standard drugs fluconazole and itraconaole. In vivo antifungal activity of 5-phenylthio-2,4-bisbenzyloxypyrimidine at the dose levels of 10 and 30 mg/kg was carried by causing systemic infection of mice using the same fungi used in in vitro testing. The results from in vivo studies with 5-phenylthio-2,4-bisbenzyloxypyrimidine and fluconazole indicated that 5-phenylthio-2,4-bisbenzyloxypyrimidine had similar potency as fluconazole at both dose levels.     

Multiple level C in vitro/in vivo correlation of dissolution profiles of two thyroxine tablets with pharmacokinetics data obtained from patients treated for hypothyroidism

In a previous study aimed to compare the bioavailability of two levothyroxine tablets, we found a good relation between their pharmacokinetics parameters and dissolution profiles, employing the USP dissolution conditions in use at that time (24th edition). Despite the formulations were considered bioequivalent, the test product presented values of AUC and concentrations at steady-state significantly lower (about 10%) than the reference ones. The purpose of the present study was to evaluate if the actual pharmacopeial conditions (with alterations introduced in the first supplement of USP 24) would also allow a good correlation between bioavailability and dissolution data. The partial AUCs were correlated with cumulative levothyroxine amount dissolved at three different times, for each dissolution condition. Employing the old method, test tablets had a slower dissolution rate than the reference ones, resulting in a quite good multiple level C in vitro/in vivo (IVIV) correlation. On the other hand, the very fast dissolution profiles obtained in the actual condition lead to a worse IVIV correlation. Present work indicates that the mild conditions proposed in the older US Pharmacopeia were better than the actual in order to discriminate dissolution profiles of levothyroxine tablets which present subtle, but significant, differences in their pattern of absorption.     

Development and evaluation of cefadroxil drug loaded biopolymeric films based on chitosan-furfural schiff base

Cefadroxil drug loaded biopolymeric films of chitosan-furfural schiff base were prepared by reacting chitosan with furfural in presence of acetic acid and perchloric acid respectively for the external use. Prepared films were evaluated for their strength, swelling index, thickness, drug content, uniformity, tensile strength, percent elongation, FTIR spectral analysis and SEM. The results of in vitro diffusion studies revealed that the films exhibited enhanced drug diffusion as compared to the films prepared using untreated chitosan. The films also demonstrated good to moderate antibacterial activities against selective gram positive and gram negative bacteria.     

New functional degradable and bio-compatible nanoparticles based on poly(malic acid) derivatives for site-specific anti-cancer drug delivery

Design of an efficient site-specific drug delivery system based on degradable functional polymers still remains challenging. In this work, we synthesized and characterized three degradable functional polyesters belonging to the poly(malic acid) family: the poly(benzyl malate) (PMLABe), the poly(ethylene glycol)-b-poly(benzyl malate) (PEG₄₂-b-PMLABe), the biotin-poly(ethylene glycol)-b-poly(benzyl malate) (Biot-PEG₆₂-PMLABe). Starting from these building blocks, we were able to prepare the corresponding well-defined degradable functional nanoparticles whose toxicity was evaluated in vitro on normal and cancer cell lines. Results have evidenced that the prepared nanoparticles did not show any significant cytotoxicity even at high concentrations. A model anti-cancer drug (doxorubicin, Dox) or a fluorescent probe (1,1′-dioctadecyl-3,3,3′,3′-tetramethylindodicarbocyanine, DiD oil) has been encapsulated into PMLABe, PEG₄₂-PMLABe or Biot-PEG₆₂-PMLABe based nanoparticles in order to evaluate, respectively, the in vitro cytotoxicity of Dox-loaded nanoparticles on normal and cancer cell lines and the ligand (biotin) effect on cellular uptake in vitro using mmt 060562 cell line. Dox-loaded PMLABe, PEG₄₂-PMLABe or Biot-PEG₆₂-PMLABe nanoparticles showed an in vitro cytotoxicity similar to that of free Dox. Moreover, the DiD oil loaded Biot-PEG₆₂-PMLABe based nanoparticles showed a better in vitro cellular uptake than ligand-free DiD oil loaded nanoparticles. Both results evidence the great potential of such degradable functional poly(malic acid) derivatives for the design of highly efficient site-specific anti-cancer nanovectors.     

两相溶出系统及其在难溶性药物制剂评价中的应用

两相溶出系统由水相和有机相组成,是一个同时测定药物溶出和分配的体外溶出方法,具有模拟体内吸收、克服表面活性剂对溶出的影响等优点,在评价难溶性药物的体外溶出方面具有良好的应用前景.本文综合近年来该领域的相关研究,对两相溶出系统的发展历史、溶出装置、理论模型及应用作简要综述,并对研究前景进行了总结与展望.     

Development and application of a validated HPLC method for the analysis of dissolution samples of levothyroxine sodium drug products

A rapid, selective, and sensitive gradient HPLC method was developed for the analysis of dissolution samples of levothyroxine sodium tablets. Current USP methodology for levothyroxine (L-T(4)) was not adequate to resolve co-elutants from a variety of levothyroxine drug product formulations. The USP method for analyzing dissolution samples of the drug product has shown significant intra- and inter-day variability. The sources of method variability include chromatographic interferences introduced by the dissolution media and the formulation excipients. In the present work, chromatographic separation of levothyroxine was achieved on an Agilent 1100 Series HPLC with a Waters Nova-pak column (250 mm × 3.9 mm) using a 0.01 M phosphate buffer (pH 3.0)-methanol (55:45, v/v) in a gradient elution mobile phase at a flow rate of 1.0 mL/min and detection UV wavelength of 225 nm. The injection volume was 800 μL and the column temperature was maintained at 28°C. The method was validated according to USP Category I requirements. The validation characteristics included accuracy, precision, specificity, linearity, and analytical range. The standard curve was found to have a linear relationship (r(2)>0.99) over the analytical range of 0.08-0.8 μg/mL. Accuracy ranged from 90 to 110% for low quality control (QC) standards and 95 to 105% for medium and high QC standards. Precision was <2% at all QC levels. The method was found to be accurate, precise, selective, and linear for L-T(4) over the analytical range. The HPLC method was successfully applied to the analysis of dissolution samples of marketed levothyroxine sodium tablets.     

Evaluation of the genotoxic potential of single-wall carbon nanotubes by using a battery of in vitro and in vivo genotoxicity assays

The genotoxic potential of a high purity sample of single-wall carbon nanotubes (SWCNTs) was evaluated using a battery of in vitro and in vivo genotoxicity assays. These comprised a bacterial reverse mutation test (Ames test), an in vitro chromosomal aberration test, and an in vivo mouse bone marrow micronucleus test. The SWCNTs exerted no genotoxicity in Salmonella typhimurium TA97, TA98, TA100, and TA1535, or in Escherichia coli WP2 uvrA/pKM101, whether in the absence or presence of metabolic activation and at concentrations of 12.5–500 μg/plate. In the chromosomal aberration test, at 300–1000 μg/mL, the SWCNTs did not increase the number of structural or numerical chromosomal aberrations, whether the test was conducted with or without metabolic activation. In the in vivo bone marrow micronucleus test, doses of 60 mg/kg and 200 mg/kg SWCNTs did not affect the proportions of immature and total erythrocytes, nor did it increase the number of micronuclei in the immature erythrocytes of mice. The results of these studies show that the high purity and well-dispersed sample of SWCNTs are not genotoxic under the conditions of the in vitro bacterial reverse mutation assay, chromosomal aberration assay, or in vivo bone marrow micronucleus test, and thus appear not to pose a genotoxic risk to human health in vivo.