ACL reconstruction: patellar tendon versus hamstring grafts—economical aspects

The aim of the present investigation was to compare the costs for the use of patellar tendon versus hamstring tendons as grafts for anterior cruciate ligament (ACL) reconstruction including the different fixation methods. The background is that during recent years there has been a dramatic shift from patellar tendon to hamstring tendons in ACL reconstructions in Sweden. All our patients with ACL reconstructions performed during 1 year (2004) were included. Knee joints numbering 440 in 439 patients were primary ACL reconstructions. A hamstring graft was used in 345 knee joints (78.4%) and a patellar tendon graft in 95 (21.6%) of the patients (Table 2). On average 34 (SD 12.9; range 14–63) ACL reconstructions per surgeon were performed by a total of 14 surgeons. The average cost for patellar tendon procedure was 197 € compared to 436 € for the hamstring procedure. Mean time for surgery in primary reconstructions was 11.5 min shorter (P<0.001) for patellar tendon reconstructions (71.3±31 min) compared to hamstring reconstructions (83.2±27 min). This means a difference in cost of 90 €. The total additional cost (fixation and surgery time) for the hamstring method compared to the patellar tendon method was on an average 329 €. From a strict economic point of view we therefore recommend or at least consider the use of the patellar tendon as a graft in ACL reconstructions.     

Allografts in the treatment of anterior cruciate ligament injuries

Symptomatic knee instability is a common complaint among athletic individuals after a torn anterior cruciate ligament (ACL) of the knee. Allograft ACL reconstruction has gained popularity for primary and revision reconstructions. This graft choice has become popular with good intermediate term results combined with decreased operative times, hospital costs, and improved immediate postoperative pain and function. Intermediate follow-up has demonstrated similar results with autograft reconstructions, without the addition of donor site morbidity. Multiple allograft options exist for ACL reconstruction. The most commonly selected grafts include patellar tendon, Achilles tendon, and tibialis allografts. The use of a tibialis allograft provides a stout graft for reconstruction, while minimizing bone tunnel size. Bone-patella-bone allografts provide bone to bone fixation options with flexibility in tunnel selection sizing.     

Biomechanical comparison of posterior cruciate ligament reconstruction techniques using cyclic loading tests

Posterior tibial translation (PTT) of the posterior cruciate ligament (PCL) reconstructed-knee under cyclic loading of 1,000 cycles with a 100-N load was compared between four different procedures, including two reconstructions with patellar tendon graft (transtunnel and inlay techniques) and two reconstructions with hamstring tendon graft (Endobutton and EndoPearl techniques) in twelve fresh-frozen human knees. The EndoPearl technique is a direct tendon fixation using biodegradable interference screws and an anchoring device, while the Endobutton technique is an indirect tendon fixation using a titanium button and surgical tape. The change of PTT after cyclic loading in the Endobutton technique was significantly greater than in the other reconstruction technique. No graft rupture at the killer turn or complete pullout from the bone tunnel was found. The advantage of the inlay technique compared to the transtunnel technique with respect to the posterior stability could not be shown in the current study. Posterior laxity of PCL reconstructed-knees with hamstring tendon graft using the Endobutton technique increased more easily than that with patellar tendon graft. For PCL reconstruction using the hamstring tendon graft, anatomical fixation may be preferable to prevent excessive posterior laxity in the early phase of the rehabilitation protocol.     

Pullout strength of tibial graft fixation in anterior cruciate ligament replacement with a patellar tendon graft: interference screw versus staple fixation in human knees

The endoscopic single incision technique for anterior cruciate ligament (ACL) reconstruction with a femoral half-tunnel may lead to a graft/tunnel mismatch and subsequent protrusion of the block from the tibial tunnel. The typical tibial fixation with an interference screw is not possible in these cases. Fixation with staples in a bony groove inferior to the tunnel outlet can be used as an alternative technique. Current literature does not provide biomechanical data of either fixation technique in a human model. This study was performed to evaluate the primary biomechanical parameters of this technique compared with a standard interference screw fixation of the block. Fifty-five fresh-frozen relatively young (mean age 44 years) human cadaver knee joints were used. Grafts were harvested from the patellar tendon midportion with bone blocks of 25 mm length and 9 mm width. A 10-mm tibial tunnel was drilled from the anteromedial cortex to the center of the tibial insertion of the ACL. Three different sizes of interference screws (7 × 30, 9 × 20, 9 × 30 mm) were chosen as a standard control procedure (n = 40). For tibial bone-block fixation the graft was placed through the tunnel, and the screw was then inserted on the cancellous or the cortical surface, respectively. Fifteen knees were treated by staple fixation. A groove was created inferior to the tunnel outlet with a chisel. The bone block was fixed in this groove with two barbed stainless steel staples. Tensile testing in both groups was carried out under an axial load parallel to the tibial tunnel in a Zwick testing machine with a velocity of 1 mm/s. Dislocation of the graft and stiffness were calculated at 175 N load. Maximum load to failure using interference screws varied between 506 and 758 N. Load to failure using staples was 588 N. Dislocation of the graft ranged between 3.8 and 4.7 mm for interference screw fixation and was 4.7 mm for staples. Stiffness calculated at 175 N load was significantly higher in staple fixation. With either fixation technique, the recorded failure loads were sufficient to withstand the graft loads which are to be expected during the rehabilitation period. Staple fixation of the bone block outside of the tunnel resulted in a fixation strength comparable to interference screw fixation. Received: 2 September 1996 Accepted: 30 January 1997     

A biomechanical evaluation of transcondylar femoral fixation of anterior cruciate ligament grafts

BACKGROUND: Interference screw fixation of the graft in anterior cruciate ligament reconstruction is considered the gold standard, but limited clinical experience suggests that transcondylar fixation is equally effective. PURPOSE: To compare transcondylar and interference screw fixation. STUDY DESIGN: Ex vivo biomechanical study. METHODS: Twenty pairs of unembalmed knees underwent anterior cruciate ligament reconstruction with patellar tendon autografts. In 1 knee of each pair, the bone plug was stabilized in the femoral tunnel with standard interference screws; in the other knee, transcondylar screws were used. Testing to failure occurred immediately or after 1000 cycles of sinusoidal loading (30 to 150 N) (20 paired reconstructions each). Fixation stiffness, strength, graft creep, displacement amplitude, and change in amplitude were measured and compared (repeated measures anaylsis of variance with Tukey test; P <.05). RESULTS: There was no significant difference in acute strength, maximum load within 3 mm, or stiffness between transcondylar fixation (410 +/- 164 N, 183 +/- 93 N, and 49.6 +/- 28 N/mm, respectively) and interference fixation (497 +/- 216 N, 206 +/- 115 N, and 61 +/- 37.8 N/mm, respectively). Similarly, there was no significant difference in cyclic strength, maximum load within 3 mm, or stiffness between transcondylar fixation (496 +/- 214 N, 357 +/- 82.9 N, and 110 +/- 27.4 N/mm, respectively) and interference fixation (552 +/- 233 N, 357 +/- 76.2 N, and 112 +/- 26.8 N/mm, respectively). Predominant modes of failure were bone plug pullout (transcondylar fixation) and tendon failure or bone plug fracture (interference fixation). CONCLUSIONS: Transcondylar screw fixation of the patellar tendon autograft into the femoral tunnel performed mechanically as well as interference screw fixation. CLINICAL RELEVANCE: The results suggest that transcondylar and interference screws provide similar fixation for anterior cruciate ligament reconstruction.     

One- versus two-incision technique for anterior cruciate ligament reconstruction with patellar tendon graft Results on early rehabilitation and stability

Anterior cruciate ligament (ACL) reconstruction with patellar tendon graft has become a standard procedure. The graft can be inserted either using two tunnels and a lateral femoral incision or with a femoral half-tunnel drilled from the joint, thus avoiding the lateral incision. Advantages have been claimed for the single-incision technique in the early rehabilitation period. Forty patients with ACL deficiency were included in a prospective randomized trial comparing the single- and two-incision technique with a follow-up period of 12 months. Preoperative data did not show any significant difference between the two groups. At early follow-up no differences were observed with respect to complications or the progress of rehabilitation. Evaluation at 12 months postoperatively using the IKDC form revealed good to excellent results in 70% of patients. ACL reconstruction reduced anterior translation of the knee significantly at the 6-month and 12-month follow-up with a slight increase of MMD values at 12 months in both groups. The arthroscopic single-incision technique did not differ from the mini-open technique in terms of postoperative pain medication, incidence of effusion, postoperative range-of-motion or any rehabilitation parameters. Stability was comparable in both groups at all time periods. We conclude that an arthroscopic single-incision technique has no advantage over a mini-open two-incision technique for ACL reconstruction with patellar tendon graft in terms of subjective or objective parameters.     

A prospective randomized study of patellar versus hamstring tendon autografts for anterior cruciate ligament reconstruction

BACKGROUND: Bone-patellar tendon-bone graft has been the most commonly used graft material in anterior cruciate reconstructions, but there has been increasing use of hamstring tendon grafts. However, no existing clinical studies show adequate support for the choice of one graft over the other. HYPOTHESIS: Hamstring tendons are equally as good as patellar tendon in anterior cruciate ligament reconstructions. STUDY DESIGN: Prospective randomized clinical trial. METHODS: Ninety-nine patients with laxity caused by a torn anterior cruciate ligament underwent arthroscopically assisted reconstruction with graft randomization according to their birth year. Grafts were either bone-patellar tendon-bone with metal interference screw fixation or double-looped hamstring tendons with metal plate fixation. There were no significant differences between the two groups preoperatively or at operation. Standard rehabilitation included immediate postoperative mobilization without a knee brace, protected weightbearing for 2 weeks, and return to full activity at 6 to 12 months. RESULTS: Forty-three patients in the patellar tendon group and 46 patients in the hamstring tendon group were available for clinical evaluation at a minimum of 21 months after surgery. No statistically significant differences were seen with respect to clinical and instrumented laxity testing, International Knee Documentation Committee Score ratings, isokinetic muscle torque measurements, and Kujala patellofemoral, Lysholm, and Tegner scores. CONCLUSION: Equal results were seen for patellar and hamstring tendon autograft anterior cruciate ligament reconstructions at 2 years after surgery. Both techniques seem to improve patients' performance.     

Randomized prospective study of ACL reconstruction with interference screw fixation in patellar tendon autografts versus femoral metal plate suspension and tibial post fixation in hamstring tendon autografts: 5-year clinical and radiological follow-up results

Patellar tendon graft has been the most frequently used material in anterior cruciate ligament (ACL) reconstruction, but the hamstring tendons have been increasingly used as well; however, which graft is to be preferred is not adequately supported by existing clinical studies. In this prospective randomized clinical trial, the study hypothesis was that the hamstring tendons are equally good graft material as the patellar tendon in ACL reconstruction. Ninety-nine patients with laxity due to a torn ACL underwent arthroscopically assisted reconstruction with graft randomization according to their birth year to either patellar tendon with metal interference screw fixation or double looped semitendinosus and gracilis tendons with fixation similar to the Endobutton technique using a titanium metal plate suspension proximally and screw-washer postdistally. Excluding preoperative Lysholm knee score, there were no significant differences between the two groups in the preoperative and operative data. A standard rehabilitation regimen was used for all the patients, including immediate postoperative mobilization without a knee brace, protected weight bearing for 2 weeks, and return to full activity at 6–12 months postoperatively. Forty patients in the patellar tendon group and 39 patients in the hamstring tendon group were available for clinical evaluation at median 5 years after surgery (ranges 3 years 11 months–6 years 7 months). The results revealed no statistically significant differences with respect to clinical and instrumented laxity testing, isokinetic muscle torque measurements, International Knee Documentation Committee ratings, Lysholm (knee score), Tegner (activity level) and Kujala patellofemoral knee scores. There was an enlargement of the drill tunnels, statistically more in the hamstring tendon group, but no increase from 2 to 5 years in either group. Narrowing of the joint spaces (IKDC measurement method) from 2 to 5 years postoperatively was seen in both the groups, however, without difference between the two groups.     

A comparison of preoperative imaging techniques for predicting patellar tendon graft length before cruciate ligament reconstruction

Autogenous bone-patellar tendon-bone is commonly used as graft material for cruciate ligament reconstructions. If this type of graft is too long, graft fixation other than an interference screw may be required. If it is too short, selection of another type of graft may be necessary. If the length of the patellar tendon portion of the graft could be accurately predicted, preoperative planning could determine the adequacy of this graft and choice of fixation for the planned procedure. Using lateral radiographs with the knee flexed 30 degrees, standard magnetic resonance imaging, and magnetic resonance imaging with supplemental three-dimensional reconstructions, we measured the length of the patellar tendon in cadavers and then compared these measurements with the actual patellar tendon length measurements. Linear regression analysis resulted in r2 values of 0.80, 0.43, and 0.65 for lateral radiographs, standard magnetic resonance imaging, and magnetic resonance imaging with three-dimensional reconstructions, respectively. We concluded that lateral radiographs at 30 degrees of knee flexion are the most accurate predictors of patellar tendon length.     

Patellar fractures associated with medial-third bone-patellar tendon-bone autograft ACL reconstruction

Patella fractures following anterior cruciate ligament (ACL) reconstruction are a recognized but rarely reported complication. To our knowledge, 24 reports of patella fractures after ACL reconstruction using the central-third patella-tendon autograft have been reported in the literature. Patellar fractures associated with the use of the medial-third bone-patellar tendon-bone autograft have not been reported. This article describes four cases of patellar fractures in 478 ACL reconstructions between 1992 and 1999, using the medial third of the patellar tendon graft. All of them were transverse fractures of the patella but only one was displaced. All patients suffered local injury to the donor knee between 2 and 4 months postoperatively. No significant differences in the final outcome were noticed between the cases complicated with patellar fracture and those with uncomplicated ACL reconstructions.     

Comparison of femoral fixation methods for anterior cruciate ligament reconstruction with patellar tendon graft: a mechanical analysis in porcine knees

The aim of the present study was to evaluate the structural properties of femur–patellar tendon graft complex in anterior cruciate ligament (ACL) reconstruction using different femoral fixation devices. Type of study is biomechanical testing. An ACL reconstruction was performed on 40 cadaver porcine knees, using patellar tendon (PT) graft. Specimens were divided into four groups according to the femoral fixation: interference absorbable screw (Group A), metallic setscrew (Group B), absorbable pins (Group C), and a combination of metallic setscrew and pin (Group D). Other ten knees were used as controls. On each sample, a cyclic loading test, then a load-to-failure test were performed. Elongation after 1,000 loading cycles, ultimate failure load, yield load, stiffness, deformation at the yield point, and mode of failure were recorded. Kruskal–Wallis test and Tukey test were used to compare the differences between groups. The lowest mean elongation after 1,000 load cycles was observed for Group B (1.7 ± 1.4 mm) and D (1.2 ± 0.3 mm). Ultimate failure load of Group D (1,021.8 ± 199.4 N) was comparable with that of normal ACL (1,091.2 ± 193.3 N) and PT graft (1,140.6 ± 285.7 N). All other groups were lower than the controls. For mean stiffness, all the groups, excepting for Group D (172.8 ± 40.4 N/mm), were significantly lower than PT control group (216 ± 78.4 N/mm). Mode of failure was graft pullout for Groups A and B, distal pin breakage for Group C, and midsubstance graft rupture in 80% of the cases for Group D. Only combined compression and suspension fixation did not show significantly different structural properties in comparison with normal ACL and PT graft. Furthermore, it showed no risk of graft pullout or hardware breakdown in comparison with other fixation devices.     

Multistranded hamstring tendon graft fixation with a central four-quadrant or a standard tibial interference screw for anterior cruciate ligament reconstruction

BACKGROUND: Tibial fixation of hamstring tendon grafts has been the weak link in anterior cruciate ligament reconstruction. HYPOTHESIS: Use of a central four-quadrant sleeve and screw provides superior fixation when compared with standard interference screw fixation. STUDY DESIGN: Controlled laboratory study. METHODS: In eight pairs of cadaveric knees each anterior cruciate ligament was reconstructed using either an interference screw or a central sleeve and screw on the tibial side. The specimens were then subjected to cyclic loading followed by a load-to-failure test. RESULTS: The load required to cause 1 and 2 mm of graft laxity, defined as the separation of the femur and the tibia at the points of graft fixation, was significantly greater with the sleeve and screw than with the interference screw (at 2 mm: sleeve and screw, 216.1 +/- 30.1 N; interference screw, 167.0 +/- 33.2 N). The force at initial slippage for each of the graft strands was significantly higher with use of the central sleeve and screw. CONCLUSIONS: The four-quadrant sleeve and screw device may provide greater surface area for healing of hamstring tendon grafts and allow equal tensioning of graft strands before fixation. These factors are associated with increased strength of fixation and reduced laxity of the graft after cyclic loading. Clinical Relevance: Use of the central four-quadrant sleeve and screw system offers increased strength of fixation in anterior cruciate ligament reconstruction with hamstring tendon graft.     

Biomechanical properties of quadruple tendon and patellar tendon femoral fixation techniques

Two femoral fixation techniques for quadruple hamstring tendon grafts were compared under cyclic loading with the patellar tendon: the rectangular inserted pin (TransFix) and biodegradable interference screw fixation of the quadruple tendon and titanium interference screw fixation of the middle third of the patellar tendon. Porcine specimens were mounted onto a tension load machine, and the tendon-fixation-femur-complex was tested for stiffness, displacement during 800 cycles of loading between 50 and 250 N and ultimate tension load. TransFix fixation showed the greatest stiffness at 183.6 N/mm ( P<0.05). The least displacement under cyclic loading was observed for the titanium interference screw followed by the TransFix and biodegradable interference screw ( P<0.01). The ultimate tension load was greatest for the TransFix fixation at 1303+/-282 N, followed by patellar tendon fixation with 763+/-103 N and the biodegradable interference screw fixation with 480+/-133 N ( P<0.001). To reduce initial elongation of the graft and displacement at the fixation site, preconditioning of both the tendon and tendon-fixation complex is especially important when using quadruple tendons. TransFix fixation provides better stability and greater stiffness and pull-out strength than the other techniques. This finding is of clinical relevance to surgeons of the anterior cruciate ligament.     

Graft tension in anterior cruciate ligament reconstruction. An in vivo study in dogs

The purpose of this study was to examine the effect of initial tensioning on the outcome of reconstruction of the ACL. The ACLs of 15 adult mongrel dogs were excised and reconstructed. In the first five dogs, the ACLs of both knees were reconstructed using the medial one-third of the patellar tendon. The graft was fixed under a tension of 1 N (0.22 pounds) in one knee and 39 N (8.8 pounds) in the opposite knee. In the remainder of the dogs, the reconstructions were augmented with Dacron prostheses. Tensioning of both graft components in the augmented reconstructions was either with 1 N in one knee and 39 N in the contralateral knee or disproportionate tensions of 1 N and 39 N applied to the autogenous material and to the prosthesis. Sacrifice was 3 months postsurgery and results were examined with microangiography/history and mechanical testing. In the reconstructions with the patellar tendon alone, the biologic study showed poor vascularity and focal myxoid degeneration within the graft pretensioned with a load of 39 N. In the augmented reconstructions, the knees in which both graft materials were fixed with 1 N tension showed the strongest and stiffest reconstruction at 3 months. The study suggests that minimal tension should be applied to the graft materials during surgical reconstruction of the ACL.     

Synovial healing in reconstructed cruciate ligaments. Our personal experience compared in single interventions and combined reconstructions

INTRODUCTION: The healing process of tendon grafts used in cruciate ligament reconstruction is called ligamentization. The tendon structural architecture changes progressively into the histological appearance of normal ligament. Amiel and Clancy have demonstrated that this process is time-dependent in anterior cruciate ligament (ACL) reconstruction, the tendon graft taking one year to become similar to a normal cruciate ligament. Three different maturation phases of anterior cruciate graft ligamentization can be seen at MRI: periligamentous proliferation, intraligamentous proliferation and definitive healing. We report our MR findings in the reconstruction of single ACL, posterior cruciate ligament (PCL), and of both ACL and PCL. MATERIAL AND METHODS: January 1995 to January 1999 we selected 60 patients submitted to arthroscopic cruciate ligament reconstruction. The ACL was reconstructed with the patellar tendon in 22 cases and the PCL in 23; fifteen patients underwent double reconstruction of ACL, with hamstring tendons, and PCL, with patellar tendons. Fifty-five patients were followed-up with MRI: 45 with a dedicated permanent magnet (Artroscan, Esaote Biomedica, Genoa, Italy) and 10 with a permanent low-field unit (AIRIS, Hitachi, Japan); the same technical parameters were used in all cases. Forty of 55 patients were examined at 1, 3, 6, 9 and 12 postoperative months, while 15 were followed-up longer (12 to 36 months postoperatively). At the first follow-up MR examination, 5 patients (2 ACL and 3 PCL) were excluded for incorrect tunnel position (1 case), hypertrophic scarring (2 cases) and new trauma (2 cases). MR findings were compared with clinical data of joint stability. RESULTS: MRI showed the different stages of the healing process in 20 ACL patients: proliferating soft tissue around the graft with the low signal intensity typical of tendons (stage I, 1-3 months postoperatively), the graft becomes progressively hyperintense (stage II, 3-9 months postoperatively), and finally the low signal intensity indicating completed ligamentization (stage III, 12 months postoperatively). As for PCL reconstructions, MR findings were similar but the process took longer, even 24 months. Finally, in the 15 cases of double reconstruction, both grafts were difficult to distinguish on T1-weighted images for a very long time (24-36 months postoperatively). DISCUSSION AND CONCLUSIONS: Relative to the ACL, ligamentization takes longer for PCL and combined ACL and PCL reconstructions, probably because the morphological changes in PCL and double grafts may be impaired by many factors, such as gravity, long bone tunnels, hemarthrosis, hyperplastic synovial reaction in the intercondylar notch; also, rehabilitation protocols differ in ACL from PCL patients. No signs of instability were found at physical or arthrometric examinations. MRI demonstrates the different stages of ligamentization and thus proves a useful tool for postoperative follow-up in cruciate ligament reconstructions. Contrast-enhanced (Gd) studies are reserved to the cases of graft impingement or if other abnormalities are suspected.     

Endoscopic anterior cruciate ligamentreconstruction using doubled gracilis and semitendinosus tendons and endobutton femoral fixation

Donor site complications associated with the use of patellar tendon autografts have resulted in increased interest in the use of multiple-stranded hamstring tendon grafts (semitendinosus and gracilis tendons) for anterior cruciate ligament (ACL) reconstruction. Two major advantages of hamstring tendon grafts are their high initial strength and stiffness, and their harvest results in minimal donor site morbidity. The EndoButton (Smith and Nephew, Andover, MA) provides a quick, simple, strong, and reproducible endoscopic method of securing the femoral end of hamstring tendon grafts. This article describes our technique of endoscopic ACL reconstruction using a doubled semitendinosus and gracilis autograft with EndoButton femoral fixation.     

The effect of initial graft tension in anterior cruciate ligament reconstruction on the mechanical behaviors of the femur-graft-tibia complex during cyclic loading

BACKGROUND: Initial graft tension influences clinical results of anterior cruciate ligament reconstruction. HYPOTHESIS: Under repetitive loading conditions, the effect of initial graft tension on the biomechanical behavior of the femur-graft-tibia complex may depend on the graft and the fixation. STUDY DESIGN: Ex vivo biomechanical laboratory study. METHODS: After anterior cruciate ligament reconstruction, initial graft tension of 20, 80, or 140 N was applied to the complex for 2 minutes. Then, a cyclic force-relaxation test was performed for 5000 cycles so that the graft was stretched by 2 mm. RESULTS: In a patellar tendon graft with interference screws, the average peak load values at the 5000 th cycle were 105, 157, and 205 N for the complexes with initial tension of 20, 80, and 140 N, respectively. In a flexor tendon graft with interference screws, the values were 27, 41, and 39 N. In a flexor tendon graft with Endobutton fixation, the values were 17, 40, and 77 N. CONCLUSIONS: Considering the tension of the normal anterior cruciate ligament (16 to 87 N), an initial tension of 20 N appears to be high enough for a patellar tendon graft. For a flexor tendon graft with interference screws, an increase in initial tension above 80 N has no biomechanical advantages.     

A biomechanical comparison of different surgical techniques of graft fixation in anterior cruciate ligament reconstruction

Different surgical methods of graft fixation in ACL reconstruction were examined to determine the effects on mechanical properties of the reconstructed ACL. Ten human cadavers were used in this study. Six different types of grafts were studied. The tendon grafts were removed from each cadaver and fixed to femurs and tibias as ACL substitutes with different surgical fixation methods, leaving femur-reconstructed graft-tibia preparations. The surgical techniques used were staple fixation, tying sutures over buttons, and screw fixation. In the latter, the screws were introduced through femoral and tibial drill holes from the outside in order to achieve interference fit as described by Lambert. Tensile testing demonstrated that the original ACL is significantly stronger than the graft used for reconstruction in linear load, stiffness, and maximum tensile strength. All of the failures of the reconstructed ACL grafts occurred at the fixation site, indicating that the mechanically weak link of the reconstructed graft is located at the fixation site. Among the different methods of fixation, one-third of the patellar tendon secured with a cancellous screw, especially with a custom designed large diameter screw, showed significantly higher values. Although many other factors affect the success of ACL reconstruction, our study indicates that the method of surgical fixation is the major factor influencing the graft's mechanical properties in the immediate postoperative period.     

Gender differences in outcome after anterior cruciate ligament reconstruction with hamstring tendon autograft

BACKGROUND: It is now well documented that women are more likely to suffer anterior cruciate ligament injuries than are men. A few studies have examined gender differences in the outcome of anterior cruciate ligament reconstruction with patellar tendon graft and hamstring tendon with EndoButton fixation, but no well-controlled studies have specifically compared men and women after anterior cruciate ligament reconstruction with hamstring tendon graft and interference screw fixation. HYPOTHESIS: There is no difference in outcome between men and women after anterior cruciate ligament reconstruction with hamstring tendon autograft and interference screw fixation. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: There were 100 men and 100 women who underwent isolated anterior cruciate ligament reconstruction by a single surgeon. Patients were assessed preoperatively and at 1, 2, and 7 years after surgery. Variables were compared between female and male patients. RESULTS: Laxity on physical evaluation was greater in women than in men on Lachman (P = .04), pivot-shift (P = .05), and mean manual maximum testing (P = .05) at 7 years. However, the magnitude of this difference was small. No patient had a greater than grade 1 Lachman or pivot-shift test result, and the mean difference between men and women was 0.6 mm on instrumented testing. Anterior cruciate ligament graft rupture occurred in 11 men and 10 women. There was no difference between male and female patients for self-reported knee function or symptoms of instability or radiologic examination. CONCLUSION: Anterior cruciate ligament reconstruction using hamstring tendon autograft affords excellent self-reported and objective results in both men and women after 7 years. Although significantly greater laxity on physical examination was present in female patients than in male patients, the magnitude of this difference was small and had no effect on activity level, graft failure, or subjective or functional assessment.     

Central quadriceps free tendon for anterior cruciate ligament reconstruction

Central quadriceps free tendon provides an outstanding autograft alternative for routine anterior cruciate ligament (ACL) reconstruction, allowing preservation of hamstring tendons and eliminating the morbidity of bone plug harvest from the patella. Correct graft harvest technique, proper tunnel/graft sizing, accurate fixation, and adherence to the methods described will permit excellent ACL reconstruction with low morbidity.