Efficient gallium‐68 radiolabeling reaction of DOTA derivatives using a resonant‐type microwave reactor

Gallium‐68 (⁶⁸Ga, t_1/2 = 68 min) can be easily obtained from a ⁶⁸Ge/⁶⁸Ga generator, and several such systems are commercially available. The use of positron emission tomography (PET) imaging using ⁶⁸Ga‐labeled radiopharmaceuticals is expected to increase in both preclinical and clinical settings. However, the chelation between a ⁶⁸Ga cation and the bifunctional macrocyclic chelates that are used for labeling bioactive substances, such as 1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid (DOTA), requires a relatively long reaction time and high temperature to achieve a high radiochemical yield. Previously, we reported on a novel resonant‐type microwave reactor that can be used for radiosynthesis and the usefulness of this reactor in the PET radiosynthesis of ¹⁸F. In the present study, the usefulness of this resonant‐type microwave reactor was evaluated for the radiolabeling of model macrocyclic chelates with ⁶⁸Ga. As a result, microwave heating of resonant‐type microwave reactor notably improved the rate of the ⁶⁸Ga labeling chelate reaction in a short time period of 2 minutes, compared with the use of a conventional heating method. Additionally, it was found that the use of this reactor made it possible to decrease the amount of precursors required in the reaction and to improve the molar activity of the labeled compounds.     

Development of a new precursor‐minimizing base control method and its application for the automated synthesis and SPE purification of [18F]fluoromisonidazole ([18F]FMISO)

Bases such as potassium carbonate and potassium bicarbonate (KHCO₃) are essential for the elution of trapped [¹⁸F]fluoride from ion exchange cartridges and for the prevention of [¹⁸F]fluoride adsorption on the silica glass vial during the preparation of radiopharmaceuticals for positron emission tomography imaging. However, these bases promote the chemical decomposition of precursor compounds and the creation of unwanted organic impurities. Thus, the goal of the current study was to develop a new method for synthesizing [¹⁸F]fluoride‐labeled radiopharmaceuticals (e.g., [¹⁸F]fluoromisonizadole ([¹⁸F]FMISO)) that permits the fine control of base concentrations while minimizing adverse events. Non‐decay‐corrected radiochemical yields of 25.1 ± 5.0% and 13.3 ± 5.1% (n = 3) were achieved after solid‐phase extraction purification using automatic synthesis with GE TRACERlab MX and KHCO₃ at concentrations of 14.1 and 33.0 µmol, respectively, and 1 mg of precursor (1‐(2′‐nitro‐1′‐imidazolyl)‐2‐O‐tetra‐hydropyranyl‐3‐O‐toluenesulfonyl propanediol (NITTP)). The newly developed synthesis protocol with fine base control and low precursor content permits high radiochemical yields with minimal impurities. Copyright © 2013 John Wiley & Sons, Ltd.     

Fully automated,high yielding production of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB), and its use in microwave‐enhanced radiochemical coupling reactions

A General Electric Medical Systems (GEMS) Tracerlab FX_FN fluorine‐18 synthesis module has been reconfigured to allow rapid (45 min), fully automated production of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) using the established three‐step, one‐pot synthesis procedure. Purification is by sep‐pak only and [¹⁸F]SFB is routinely obtained in 38% non‐decay corrected yield,>1 Ci/µmol specific activity, and >95% radiochemical purity (n=20). Moreover, this report includes our preliminary research efforts into improving peptide coupling reactions with [¹⁸F]SFB using microwave‐enhanced radiochemistry. Reaction times can be reduced by>90%, when compared with traditional thermal reactions, with no significant effect on radiochemical reaction yield. Copyright © 2010 John Wiley & Sons, Ltd.     

One‐step synthesis of 4‐[18F]fluorobenzyltriphenylphosphonium cation for imaging with positron emission tomography

4‐[¹⁸F]Fluorobenzyltriphenylphosphonium cation (¹⁸F‐FBnTP) is a promising negative membrane potential targeting positron emission tomography tracer. However, the reported multistep radiolabeling approach for the synthesis of ¹⁸F‐FBnTP poses a challenge for routine clinical applications. In this study, we demonstrated that ¹⁸F‐FBnTP can be prepared in good conversion yields (~60%, nondecay corrected) in just one step via a copper‐mediated ¹⁸F‐fluorination reaction using a pinacolyl arylboronate precursor. In addition, our data suggest that ¹⁸F‐labeled (phosphonium) cations can be efficiently prepared via a copper‐mediated ¹⁸F‐fluoronation by using triflate as the counterion.     

Improved synthesis and application of [11C]benzyl iodide in positron emission tomography radiotracer production

Positron emission tomography has increased the demand for new carbon‐11 radiolabeled tracers and building blocks. A promising radiolabeling synthon is [¹¹C]benzyl iodide ([¹¹C]BnI), because the benzyl group is a widely present functionality in biologically active compounds. Unfortunately, synthesis of [¹¹C]BnI has received little attention, resulting in limited application. Therefore, we investigated the synthesis in order to significantly improve, automate, and apply it for labeling of the dopamine D₂ antagonist [¹¹C]clebopride as a proof of concept. [¹¹C]BnI was synthesized from [¹¹C]CO₂ via a Grignard reaction and purified prior the reaction with desbenzyl clebopride. According to a one‐pot procedure, [¹¹C]BnI was synthesized in 11 min from [¹¹C]CO₂ with high yield, purity, and specific activity, 52 ± 3% (end of the cyclotron bombardment), 95 ± 3%, and 123 ± 17 GBq/µmol (end of the synthesis), respectively. Changes in the [¹¹C]BnI synthesis are reduced amounts of reagents, a lower temperature in the Grignard reaction, and the introduction of a solid‐phase intermediate purification. [¹¹C]Clebopride was synthesized within 28 min from [¹¹C]CO₂ in an isolated decay‐corrected yield of 11 ± 3% (end of the cyclotron bombardment) with a purity of >98% and specific activity (SA) of 54 ± 4 GBq/µmol (n = 3) at the end of the synthesis. Conversion of [¹¹C]BnI to product was 82 ± 11%. The reliable synthesis of [¹¹C]BnI allows the broad application of this synthon in positron emission tomography radiopharmaceutical development. Copyright © 2015 John Wiley & Sons, Ltd.     

Simple and high radiochemical yield synthesis of 2′‐Deoxy‐2′‐[18F]fluorouridine via a new nosylate precursor

We synthesized 2'‐deoxy‐2'‐[¹⁸F]fluorouridine ( 7 ) as a radiotracer for positron emission tomography from a new nosylate precursor ( 6 ). This new precursor was synthesized from uridine in four steps. The overall synthetic yield was 9.4% and we have high stability of >98% purity up to 6 months at 4°C. The optimal manual [¹⁸F]fluorination conditions were 30 mg of the precursor 6 in 500 µl of acetonitrile at 145°C for 15 min with 370 MBq of [¹⁸F]fluoride. The [¹⁸F]fluorination yield was 76.5±2.7% (n = 3). After hydrolysis of protecting groups with 1 N HCl and purification by HPLC, the overall radiochemical yield and purity were 26.5±1.4% and 98.2±2.5%, respectively. The preparation time was 70.0±10.5 min (n = 3 for each result). We also developed an automated method with a radiochemical yield and purity of 24.0±2.8 and 98.0±1.5% (n = 10) using a GE TracerLab MX chemistry module. This new nosylate precursor for 2'‐deoxy‐2'‐[¹⁸F]fluorouridine synthesis showed higher radiochemical yields and reproducibility than previous methods. Copyright © 2006 John Wiley & Sons, Ltd.     

Radiosynthesis and ‘click’ conjugation of ethynyl‐4‐[18F]fluorobenzene — an improved [18F]synthon for indirect radiolabeling

Reproducible methods for [¹⁸F]radiolabeling of biological vectors are essential for the development of new [¹⁸F]radiopharmaceuticals. Molecules such as carbohydrates, peptides and proteins are challenging substrates that often require multi‐step indirect radiolabeling methods. With the goal of developing more robust, time saving, and less expensive procedures for indirect [¹⁸F]radiolabeling of such molecules, our group has synthesized ethynyl‐4‐[¹⁸F]fluorobenzene ([¹⁸F]2, [¹⁸F]EYFB) in a single step (14 ± 2% non‐decay corrected radiochemical yield (ndc RCY)) from a readily synthesized, shelf stable, inexpensive precursor. The alkyne‐functionalized synthon [¹⁸F]2 was then conjugated to two azido‐functionalized vector molecules via CuAAC reactions. The first ‘proof of principle’ conjugation of [¹⁸F]2 to 1‐azido‐1‐deoxy‐β‐d ‐glucopyranoside (3) gave the desired radiolabeled product [¹⁸F]4 in excellent radiochemical yield (76 ± 4% ndc RCY (11% overall)). As a second example, the conjugation of [¹⁸F]2 to matrix‐metalloproteinase inhibitor (5), which has potential in tumor imaging, gave the radiolabeled product [¹⁸F]6 in very good radiochemical yield (56 ± 12% ndc RCY (8% overall)). Total preparation time for [¹⁸F]4 and [¹⁸F]6 including [¹⁸F]F^? drying, two‐step reaction (nucleophilic substitution and CuAAC conjugation), two HPLC purifications, and two solid phase extractions did not exceed 70 min. The radiochemical purity of synthon [¹⁸F]2 and the conjugated products, [¹⁸F]4 and [¹⁸F]6, were all greater than 98%. The specific activities of [¹⁸F]2 and [¹⁸F]6 were low, 5.97 and 0.17 MBq nmol^?1, respectively.     

Simple preparation of new [18F]F‐labeled synthetic amino acid derivatives with two click reactions in one‐pot and SPE purification

New [¹⁸F]fluorinated 1,2,3‐triazolyl amino acid derivatives were efficiently prepared from Huisgen 1,3‐dipolar cycloaddition reactions, well known as click reaction. We developed two simultaneous click reactions in one‐pot with a simple solid‐phase extraction (SPE) purification method. [¹⁸F]fluoro‐1‐propyne was obtained at a 45% non‐decay corrected radiochemical yield based on the [¹⁸F]fluoride ion. The one‐pot and simultaneous two click reactions were performed with unprotected azido‐alkyl amino acid, [¹⁸F]fluoro‐1‐propyne, and lipophilic additive alkyne to produce three synthetic amino acid derivatives, AMC‐101 ( [¹⁸F]‐6a ), AMC‐102 ( [¹⁸F]‐6b ), and AMC‐103 ( [¹⁸F]‐6c ) with 29%, 28%, and 24% of non‐decay corrected radiochemical yields, respectively. All radiotracers indicated that radiochemical purities were >95% without any residual organic solvent. Our new method involving two click reactions in one‐pot showed high radiochemical and chemical purity by easy removal of the residual precursor from the simultaneous two click reactions.     

A facile automated synthesis of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB) for 18F‐labeled cell‐penetrating peptide as PET tracer

A fully automated synthesis of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) was carried out by a convenient three‐step, one‐pot procedure on the modified TRACERlab FX_FN synthesizer, including [¹⁸F]fluorination of ethyl 4‐(trimethylammonium triflate)benzoate as the precursor, saponification of the ethyl 4‐[¹⁸F]fluorobenzoate with aqueous tetrapropylammonium hydroxide instead of sodium hydroxide, and conversion of 4‐[¹⁸F]fluorobenzoate salt ([¹⁸F]FBA) to [¹⁸F]SFB treated with N,N,N′,N′‐tetramethyl‐O‐(N‐succinimidyl)uranium tetrafluoroborate (TSTU). The purified [¹⁸F]SFB was used for the labeling of Tat membrane‐penetrating peptide (containing the Arg‐Lys‐Lys‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Pro‐Leu‐Gly‐Leu‐Ala‐Gly‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu sequence, [¹⁸F]CPP) through radiofluorination of lysine amino groups. The uncorrected radiochemical yields of [¹⁸F]SFB were as high as 25–35% (based on [¹⁸F]fluoride) (n=10) with a synthesis time of～40 min. [¹⁸F]CPP was produced in an uncorrected radiochemical yields of 10–20% (n=5) within 30 min (based on [¹⁸F]SFB). The radiochemical purities of [¹⁸F]SFB and [¹⁸F]CPP were greater than 95%. Copyright © 2010 John Wiley & Sons, Ltd.     

Microfluidic radiosynthesis and biodistribution of [18F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid

Microfluidics technology has emerged as a powerful tool for the radiosynthesis of positron emission tomography (PET) and single‐photon emission computed tomography radiolabeled compounds. In this work, we have exploited a continuous flow microfluidic system (Advion, Inc., USA) for the [¹⁸F]‐fluorine radiolabeling of the malonic acid derivative, [¹⁸F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid ([¹⁸F]‐FPMA), also known as [¹⁸F]‐ML‐10, a radiotracer proposed as a potential apoptosis PET imaging agent. The radiosynthesis was developed using a new tosylated precursor. Radiofluorination was initially optimized by manual synthesis and served as a basis to optimize reaction parameters for the microfluidic radiosynthesis. Under optimized conditions, radio‐thin‐layer chromatography analysis showed 79% [¹⁸F]‐fluorine incorporation prior to hydrolysis and purification. Following hydrolysis, the [¹⁸F]‐FPMA was purified by C18 Sep‐Pak, and the final product was analyzed by radio‐HPLC (high‐performance liquid chromatography). This resulted in a decay‐corrected 60% radiochemical yield and ≥98% radiochemical purity. Biodistribution data demonstrated rapid blood clearance with less than 2% of intact [¹⁸F]‐FPMA radioactivity remaining in the circulation 60 min post‐injection. Most organs showed low accumulation of the radiotracer, and radioactivity was predominately cleared through kidneys (95% in 1 h). Radio‐HPLC analysis of plasma and urine samples showed a stable radiotracer at least up to 60 min post‐injection.     

Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

A first synthesis of 18F‐radiolabeled lapatinib: a potential tracer for positron emission tomographic imaging of ErbB1/ErbB2 tyrosine kinase activity

Fluorine‐18‐labeled lapatinib has been successfully synthesized for the first time by the reaction of a dimethylformamide solution of meta‐[¹⁸F]fluorobenzylbromide with a Boc‐protected lapatinib precursor fragment. The reaction proceeded in the presence of K₂CO₃ at 110 °C for 10 min in a microwave and was followed by Boc‐group deprotection with trifluoroacetic acid. The overall radiochemical yield of the reaction starting from the radiofluorination of the iodonium salt was 8–12% (uncorrected, n = 6) in a 140‐min synthesis time.     

Highlighting the versatility of the tracerlab synthesis modules. Part 1: fully automated production of [18F]labelled radiopharmaceuticals using a Tracerlab FXFN

The field of radiochemistry is moving toward exclusive use of automated synthesis modules for production of clinical radiopharmaceutical doses. Such a move comes with many advantages, but also presents radiochemists with the challenge of re‐configuring synthesis modules for production of radiopharmaceuticals that require nonconventional radiochemistry while maintaining full automation. This review showcases the versatility of the Tracerlab FX_FN synthesis module by presenting simple, fully automated methods for producing [¹⁸F]FLT, [¹⁸F]FAZA, [¹⁸F]MPPF, [¹⁸F]FEOBV, [¹⁸F]sodium fluoride, [¹⁸F]fluorocholine and [¹⁸F]SFB. Copyright © 2011 John Wiley & Sons, Ltd.     

Alternative solvents for electrophilic synthesis of 6‐[18F]fluoro‐L‐DOPA

Owing to the ozone layer‐depleting properties of chlorofluorocarbon compounds, alternative solvents for electrophilic fluorination reactions are desirable. Chloroform, dichloromethane, acetone or their deuterated analogues were examined as substitutes for Freon‐11 in the electrophilic synthesis of 6‐[¹⁸F]fluoro‐L ‐DOPA ([¹⁸F]FDOPA). CDCl₃, CD₂Cl₂ and C₃D₆O were found to be suitable solvents in this reaction, with the deuterated solvents providing significantly higher yields than Freon‐11. There were no differences among the solvents in the specific radioactivity, the radiochemical purity, the chemical purity or the microbiological quality of the final product. However, the radiochemical yield of [¹⁸F]FDOPA was increased when acetic acid was added to the precursor solution prior to the fluorination reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel synthesis of [18F]‐fluorobenzene and pyridinecarbohydrazide‐folates as potential PET radiopharmaceuticals

In an attempt to visualize folate receptors that over‐express on many cancers, [¹⁸F]‐fluorobenzene and pyridine carbohydrazide‐folates were synthesized using two different synthetic approaches starting from nucleophilic displacement reactions on ethyl‐trimethylammonium‐benzoate and pyridine carboxylate precursors. The intermediates ethyl [¹⁸F]‐fluorinated benzene and pyridine esters were reacted with hydrazine to produce the [¹⁸F]‐fluorobenzene and pyridine carbohydrazides followed by coupling with NHS‐folate 11 in the first approach. Whereas hydrazide‐folate 5 was reacted with 2,5‐dioxoazolidinyl [¹⁸F]‐fluorobenzenecarboxylate in the second approach. Based on starting [¹⁸F]‐fluoride, radiochemical yields and synthesis times were found to be around 80% (45 min) and 35% (80 min) for the first and the second approaches, respectively. The first synthetic approach holds considerable promise as a rapid and simple method for the radiofluorination of folic acid with high radiochemical yield and short time. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Comparison of pathways to the versatile synthon of no‐carrier‐added 1‐bromo‐4‐[18F]fluorobenzene

The availability of no‐carrier‐added (n.c.a.) 1‐bromo‐4‐[¹⁸F]fluorobenzene with high radiochemical yields is important for ¹⁸F‐arylation reactions using metallo‐organic 4‐[¹⁸F]fluorophenyl compounds (e.g. of lithium or magnesium) or Pd‐catalyzed coupling. In this study, different methods for the preparation of 1‐bromo‐4‐[¹⁸F]fluorobenzene by nucleophilic aromatic substitution reactions using n.c.a. [¹⁸F]fluoride were examined. Of six pathways compared, symmetrical bis‐(4‐bromphenyl)iodonium bromide proved most useful to achieve the title compound in a direct, one‐step nucleophilic substitution with a radiochemical yield (RCY) of 65% within 10 min. Copyright © 2004 John Wiley & Sons, Ltd.     

Radiochemical synthesis of 2′‐[18F]‐labelled and 3′‐[18F]‐labelled nucleosides for positron emission tomography imaging

This review article considers 2′‐labelled and 3′‐labelled nucleosides, which are of great importance as positron emission tomography (PET) probes in clinical diagnostics and PET research. Although the radiochemical preparation of several [¹⁸F]‐labelled nucleosides such as [¹⁸F]fluorothymidine or [¹⁸F](fluoroarabinofuranosyl)cytosine has been accomplished within the last two decades, a number of potentially interesting nucleoside‐based biomarkers are not yet available for automated good manufacturing practice production due to the lack of fast and efficient synthetic methods for late‐stage [¹⁸F]‐introduction. In order to meet recent demands for new PET‐based biomarkers in various clinical applications, appropriate precursors that can easily be fluorinated and deprotected need to be developed.     

Highlighting the versatility of the Tracerlab synthesis modules. Part 2: fully automated production of [11C]‐labeled radiopharmaceuticals using a Tracerlab FXC‐Pro

The field of radiochemistry is moving toward exclusive use of automated synthesis modules for production of clinical radiopharmaceutical doses. Such a move not only comes with many advantages but also presents radiochemists with the challenge of re‐configuring synthesis modules for production of radiopharmaceuticals that require non‐conventional radiochemistry while maintaining full automation. Herein, we continue our series of articles showcasing the versatility of the Tracerlab FX synthesis modules by presenting straightforward, fully automated methods for preparing a range of carbon‐11 labeled radiopharmaceuticals using a Tracerlab FX_C‐Pro. Strategies for production of [¹¹C]acetate, [¹¹C]carfentanil, [¹¹C]choline, [¹¹C]3‐amino‐4‐[2‐[(di(methyl)amino)methyl]phenyl]sulfanylbenzonitrile ([¹¹C]DASB), (+)‐a‐[¹¹C]dihydroterabenazine ([¹¹C]DTBZ), [¹¹C]flumazenil ([¹¹C]FMZ), meta‐hydroxyephedrine ([¹¹C]HED), [¹¹C]methionine, [¹¹C]PBR28, [¹¹C]Pittsburgh Compound B ([¹¹C]PiB), 1‐[¹¹C]methylpiperidin‐4‐yl propionate ([¹¹C]PMP), and [¹¹C]raclopride are presented. Copyright © 2011 John Wiley & Sons, Ltd.     

Efficient automated syntheses of high specific activity 6‐[18F]fluorodopamine using a diaryliodonium salt precursor

6‐[¹⁸F]Fluorodopamine (6‐[¹⁸F]F‐DA) is a positron emission tomography radiopharmaceutical used to image sympathetic cardiac innervation and neuroendocrine tumors. Imaging with 6‐[¹⁸F]F‐DA is constrained, in part, by the bioactivity and neurotoxicity of 6‐[¹⁹F]fluorodopamine. Furthermore, routine access to this radiotracer is limited by the inherent difficulty of incorporation of [¹⁸F]fluoride into electron‐rich aromatic substrates. We describe the simple and direct preparation of high specific activity (SA) 6‐[¹⁸F]F‐DA from no‐carrier‐added (n.c.a.) [¹⁸F]fluoride. Incorporation of n.c.a. [¹⁸F]fluoride into a diaryliodonium salt precursor was achieved in 50–75% radiochemical yields (decay corrected to end of bombardment). Synthesis of 6‐[¹⁸F]F‐DA on the IBA Synthera® and GE TRACERlab FX‐FN automated platforms gave 6‐[¹⁸F]F‐DA in >99% chemical and radiochemical purities after HPLC purification. The final non‐corrected yields of 6‐[¹⁸F]F‐DA were 25 ± 4% (n = 4, 65 min) and 31 ± 6% (n = 3, 75 min) using the Synthera and TRACERlab modules, respectively. Efficient access to high SA 6‐[¹⁸F]F‐DA from a diaryliodonium salt precursor and n.c.a. [¹⁸F]fluoride is provided by a relatively subtle change in reaction conditions – replacement of a polar aprotic solvent (acetonitrile) with a relatively nonpolar solvent (toluene) during the critical radiofluorination reaction. Implementation of this process on common radiochemistry platforms should make 6‐[¹⁸F]F‐DA readily available to the wider imaging community.