Simultaneous radial closing wedge and ulnar shortening osteotomy for distal radius malunion

Closing wedge osteotomies are an attractive treatment option for distal radius malunion in patients with osteopenia. It does not require a separate-site bone graft, result-ing in decreased morbidity. However, this procedure has always been performed in combination with ulnar head resection to accommodate closure of corrective osteotomy and to address the issue of ulnocarpal abutment. Because ulnar shortening osteotomy is more physiological solution, it seemed advantageous to us to combine radial closing wedge osteotomy and ulnar shortening osteotomy. In this article, we present in detail our technique for treating patients with distal radius malunion. The patients are potentially osteopenic such as women aged over 45 years and are active at home, work, and/or recreation but are not involved in heavy physical work. Through volar approach an appropriate bone wedge is removed from the distal radius. A small volar T-plate is used to secure the osteotomized bone fragments. The aim of the radial osteotomy is to correct the dorsal angulation in the sagittal plane within a normal range of 1 degree to 2 degrees with reference to that of opposite wrist. Ulnar shortening osteotomy is performed by using transverse osteotomy and compression plating technique with an AO compression device. The ulnar variance is adjusted to neutral. Although the technique presented requires the surgeons to use careful plate and screw technique, early results have been encouraging, and patients with osteopenia can be treated successfully. Decreased grip strength which may be provoked by shorting of the forearm is acceptable.     

Corrective osteotomy for malunion of the distal radius in young and middle-aged patients: an outcome study

INTRODUCTION: We report the outcome of osteotomy for malunion of the distal radius. MATERIAL AND METHODS: Twenty-one wrists in 21 patients (mean age 38 years) with a malunion of the distal radius were treated with an osteotomy. An opening wedge osteotomy was performed when the distal radioulnar joint (DRUJ) could be saved; a closing wedge osteotomy was done when the DRUJ was treated with resection (Darrach) or arthrodesis (Sauvé-Kapandji). The clinical and radiographic outcomes were evaluated together with the DASH score (disability of shoulder and hand). RESULTS: Extension improved to an average of 48 degrees in the Smith-type group and flexion improved to an average of 51.8 degrees in the Colles-type group. The postoperative DASH-score averaged, respectively, 17.3 and 33. There were four poor, four fair, seven good and six excellent scores on the scale of Fernandez and there were four poor, seven fair, three good and seven very good results on the Fernandez point score. Grip strength postoperatively averaged 70% of the contralateral side. Radiographically, there was a correction of increased volar tilt of the articular surface from 30.6 to 4.0 degrees in the Smith-type group and a correction of increased dorsal tilt of the articular surface of 24.6 degrees (from -21.3 to 3.3 degrees) in the Colles-type group. Nine patients had surgery on the distal ulna at the time of the radial correction. Their average DASH score was 16.8 compared to the 33.97 average DASH score of those with radial correction without ulnar surgery. CONCLUSION: Osteotomy of the distal radius in cases of malunion gives favorable outcomes. Treatment of the DRUJ is mandatory.     

Corrective osteotomy of malunited distal radius fractures using carbonated hydroxyapatite as an alternative to autogenous bone grafting

PURPOSE: The purpose of the present study was to report on the author's experience using carbonated hydroxyapatite as a bony substitute in distal radius corrective osteotomies. METHODS: Six patients had a corrective osteotomy for a malunited distal radius fracture using carbonated hydroxyapatite as an alternative to an autogenous bone graft. Internal fixation of the osteotomy was achieved by using 2 or 3 K-wires. RESULTS: At an average follow-up evaluation of 33 months (range, 22-45 mo) all the osteotomies united. Wrist flexion-extension motion improved from 75 degrees to 110 degrees , forearm rotation increased from 116 degrees to 157 degrees , and grip strength had an average increase of 140% at the time of the final follow-up evaluation. All patients were satisfied and there were no reports of persistent pain. Radiographic evaluation showed an average volar tilt improvement from a preoperative dorsal angulation shifting into a neutral position in the sagittal plane; radial lengthening improved from an average of 4 mm (range, 2-6 mm) before surgery to 7 mm (range, 5-9 mm) after surgery, ulnar plus deformity improved by 5 mm. Radiographically the carbonated hydroxyapatite material was integrated completely into the bone tissue with evidence of progressive re-absorption and bony calcification over time. The Mayo wrist score system, according to Cooney and Krimmer modifications, improved by an average of 88 and 98 points (0-100 points), respectively. CONCLUSIONS: On the basis of this preliminary experience it is reasonable to consider carbonated hydroxyapatite as a viable alternative to bone grafting in conjunction with surgical correction of a distal radius malunion. It must be augmented, however, with internal fixation.     

Three-dimensional in vivo kinematics of the distal radioulnar joint in malunited distal radius fractures

How malunion of the distal radius affects the kinematics of the distal radioulnar joint in vivo was evaluated. A novel computed tomography image-based technique was used to quantify radioulnar motion in both wrists of 9 patients who had unilateral malunited distal radius fractures. In the injured wrists dorsal angulation averaged 21 degrees +/- 6 degrees, radial inclination averaged 18 degrees +/- 5 degrees, and radial shortening averaged 21 +/- 3 mm. Clinically, the average range of motion of the injured wrists was 75 degrees +/- 25 degrees pronation and 73 degrees +/- 23 degrees supination. Kinematics of the radius during pronation and supination in the malunited forearms was indistinguishable from that in the uninjured forearms. In both the axis of rotation of the radius passed through the center of the ulnar head, although it shifted slightly ulnar and volar in supination and radial and dorsal during pronation. In contrast to previous in vitro biomechanical findings, there was no dorsovolar radial translation at the extremes of pronation or supination and no translation of the radius along the rotation axis. Soft tissues may play a larger role in limiting function than previously appreciated, and treatment may require correction of altered soft tissue structures as well as any abnormal bone anatomy.     

Distraction osteotomy for malunion of the distal end of the radius with radial shortening

The treatment and outcomes of distraction osteotomy in 9 patients with malunion of the distal radius with radial shortening are presented. The patients had an average age of 32 years (range: 14 to 36 years) and comprised 7 males and 2 females. Ulnar inclination was below normal in all patients, volar inclination was below normal in 8 patients, and the average radial length discrepancy was 7.6 mm (range: 4 to 16 mm). Angulations in the distal radius were corrected by manipulation after osteotomy, and shortening by callus distraction. In order to achieve normal radial length, distraction was performed for an average of 10.2 days (range: 7 to 19 days), and union occurred in an average of 10.7 weeks (range: 9 to 13 weeks). During the waiting period between distraction and consolidation, impairment of ulnar and volar inclination recurred in 3 patients, and translation of the distal fragment necessitating correction occurred in 3 patients. No cases of nonunion or malunion were observed. In all patients, there was a decrease in cosmetic and pain-related complaints, and improvement in wrist movements. Distraction osteotomy is a simple and effective treatment for malunion of the distal radius with concurrent radial shortening. However, the position of the distal fragment should be followed up until consolidation.     

Corrective osteotomy of malunited distal radius fractures

The malunion of the distal radius may result in shortening, radial impaction, volar angulation, dorsal displacement or rotatory deformity. For restoration, the anatomy and kinematics of the distal radioulnar joint and the triangular fibrocartilaginous complex (TFCC) are of importance. This nonunion consists of the articular disk, a meniscus homologue, the ulnar collateral ligament, and the dorsal and palmar radioulnar ligaments. Malunion of the distal radioulnar joint leads to an increase in loading on the individual parts, as well as pain and a decrease in supination and pronation. Osteotomy is indicated if the angulation of the malunion is more than 20 degrees in the frontal or sagittal plane. Corrective osteotomy requires detailed preoperative planning with calculation of the correct position in all planes. The most common operation that has proved to be effective is osteotomy of the radius, insertion of a trapezoidal bone graft in place, and internal fixation with a dorsal or volar plate.     

Surgical correction of dorsally angulated distal radius malunions with fixed angle volar plating: a case series

PURPOSE: To report our experience using a fixed-angle volar plate in conjunction with a corrective osteotomy and cancellous bone graft for the treatment of distal radius malunions with dorsal angulation in 4 patients. METHODS: Four consecutive patients had a volarly based opening wedge osteotomy with a fixed angle volar plate and cancellous bone grafting for the treatment of a dorsally angulated distal radius malunion. Data collected retrospectively included a visual analog pain scale, grip strength, range of motion, radiographic parameters, and each patient's subjective functional outcomes as measured by the Disabilities of the Arm, Shoulder, and Hand questionnaire. Motion, strength, and radiographic values were compared with the contralateral arm for each patient. RESULTS: The average time from initial fracture to corrective osteotomy was 346 days. The average length of follow-up evaluation was 13.5 months. The flexion-extension arc of motion increased an average of 21 degrees to a value of 84% of the contralateral side; the pronation-supination arc of motion increased an average of 20 degrees to a value of 98% of the contralateral side. The average tilt of the radius improved from 26 degrees extension to 2 degrees extension; the average radial inclination improved from 22 degrees to 24 degrees; the average ulnar variance excluding the 1 patient who had a distal ulna resection improved from 5 mm to 1 mm. The average retrospective Disabilities of the Arm, Shoulder, and Hand score improved from 30 to 7; the average retrospective visual analog pain scale score improved from 4.5 to 1. The average grip strength increased from 20 to 29 kg, which corresponded to 73% of the contralateral extremity. CONCLUSIONS: The rigid characteristics of fixed angle volar plates can provide an alternative to the traditional techniques of distal radius osteotomy including structural bone grafting and dorsal plate fixation or external fixation. In addition these plates are strong enough to allow for early postoperative motion. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level IV.     

Distal radial osteotomy for malunion using non–bridging external fixation

Background and purpose?Symptomatic malunion of the distal radius is a common problem and is treated by distal radial osteotomy. Plating is commonly used but has a high rate of plate removal. This study is a report of the functional and radiographic outcome of a prospective series of distal radial osteotomies using non‐bridging external fixation.

Methods?23 patients with a median age of 60 (18-84) years underwent distal radial osteotomy using non‐bridging external fixation and bone grafting for dorsal malunion of a fracture of the distal radius. There were no cases of intraarticular malunion. Radiographic, functional, and patient‐assessed outcomes were assessed preoperatively and until 6 months after surgery.

Results?The mean preoperative dorsal angle of 20 (5-40) degrees was corrected to over 5 (0-15) degrees of volar tilt (p < 0.001) and the mean preoperative positive ulnar variance of 3.9 (0-8) mm was corrected to 2.5 (0-8) mm (p?=?0.005). Carpal alignment was restored in 22 of the 23 patients. 5 patients required simultaneous ulnar surgery, 1 required ulnar shortening, and 4 required modified Bower's procedures. By 6 months postoperatively, all measures of function except extension and key grip strength showed statistically significant improvements in their means. The SF36 showed statistical improvements in two domains, role physical and bodily pain. There were 2 patients with extensor pollicis longus ruptures and 13 with minor pin‐track infections.

Interpretation?Distal radial osteotomy for dorsal malunion of the distal radius using non‐bridging external fixation is a successful technique for correction of deformity and restoration of function, with the advantages of being less invasive and not requiring further surgery for removal of metalwork.     

Rotational deformity in malunited fractures of the distal radius

PURPOSE: To evaluate rotational deformity in malunited fractures of the distal radius and its effect on forearm rotation. METHODS: Thirty-seven patients with a symptomatic malunion of the distal radius (25 with dorsal angulation and 12 with volar angulation) were assessed for rotational deformity of the distal fragment. Spiral computed tomographic scans were taken of both wrists. Rotational deformity was evaluated by comparing the radial torsion angle of the injured and uninjured sides according to Frahm. Multivariable regression analyses were used to identify the radiologic parameter that had the most important influence on forearm rotation. RESULTS: Of the 37 patients, 23 showed a rotational deformity of the distal radius. In both dorsally and volarly angulated malunions, pronation and supination deformities were identified. There was a tendency toward more pronation deformities with volar malunion. Volar angulated malunion with a rotational deformity of less than 10 degrees showed the smallest amount of forearm supination. Losses of pronation-supination did not correlate with the amount of rotational deformity. CONCLUSIONS: This study showed that rotational deformity is common with angulated malunions of the distal radius. The effect on forearm rotation should not be overestimated. Pretreatment computed tomographic scanning of both wrists to identify and measure malrotation of the distal radius may be helpful to improve the outcome after corrective osteotomy.     

Malunited fractures of the distal radius treated with corrective osteotomy using volar locking plate and a corticocancellous bone graft following immediate mobilisation.

We describe our experience of using a volar locking plate for corrective osteotomy and bone grafting combined with early mobilisation in the treatment of distal radius malunions. Corrective osteotomy of the distal radius was performed through a volar approach, and fixated by a volar locking plate associated with corticocancellous iliac bone grafting in three patients aged 16, 71 and 75 years. Two patients had had volarly displaced malunion and one dorsally displaced malunion. Wrist motion was started immediately after surgery. The average follow-up was 15 months (range, 12-20 months). All osteotomies healed at an average 5.7 weeks post-operatively, resulting in a total arc of wrist motion of 133 degrees, forearm rotation of 167 degrees, and grip strength of 70% of that of the contralateral side. This treatment method proved to be effective and safe.     

Long-term follow-up of surgical correction of Madelung's deformity with conservation of the distal radioulnar joint in teenagers

Eleven wrists with painful Madelung deformity in seven patients were corrected during adolescence by a closing wedge osteotomy of the radius and a shortening osteotomy of the ulna, with conservation of the distal radioulnar joint. At late follow-up (9.7 years) function was considerably improved. When the ulnar head was correctly relocated during operation, a new distal radioulnar space developed. Shortening of the ulna must be generous and combined with slight flexion at the osteotomy.     

Sliding osteotomy for deformity correction following malunion of volarly displaced distal radial fractures

OBJECTIVE: To determine the outcome after a sliding osteotomy for deformity correction following malunion of volarly displaced distal radius fractures. DESIGN: Retrospective review of a consecutive patient series. SETTING: A university-affiliated, tertiary-care center. PATIENTS/INTERVENTION: Ten patients with symptomatic distal radius malunion following a volarly displaced distal radial fracture (Smith's fracture) were treated with an oblique sliding osteotomy and plate fixation, through a volar approach, without using an iliac crest bone graft. Five men and five women with an average age of 41.9 years were followed for an average of 2.7 years postoperatively. MAIN OUTCOME MEASUREMENTS: Range of motion, grip strength, Fernandez wrist score, radiographic parameters. RESULTS: At latest follow-up, wrist extension improved from an average of 37 degrees preoperatively to 70 degrees postoperatively (P = 0.002), wrist flexion improved from an average of 40 degrees to 65 degrees (P = 0.012), and supination improved from an average of 31 degrees to 68 degrees (P = 0.002). Postoperative radiographs revealed an average deformity correction of 10.6 degrees of volar tilt, 7.7 degrees of radial inclination, 5.8 mm of ulnar variance, and 10.4 mm of volar translation. Using the Fernandez point score (0-20) system, the average overall score improved from 10.5 preoperatively to 17.6 postoperatively (P = 0.0001). Functional outcome was rated as excellent or good in 9 of 10 patients and fair in 1 patient (who experienced residual problems due to persistent ulnar-sided pain). There were two reoperations (one hardware removal, one distal ulnar hemiresection). CONCLUSIONS: This method reliably restores distal radial anatomy, decreases pain, and improves supination without requiring iliac crest bone grafting.     

Treatment of hallux valgus with an increased distal metatarsal articular angle: evaluation of double and triple first ray osteotomies

During a 12-year period in which 878 hallux valgus corrections were performed, 18 patients (21 feet) with symptomatic hallux valgus deformity and an increased distal metatarsal articular angle (DMAA) underwent periarticular osteotomies (double or triple first ray osteotomies). They were studied retrospectively at an average follow-up of 33 months. The surgical technique comprised a closing wedge distal first metatarsal osteotomy combined with either a proximal first metatarsal osteotomy or an opening wedge cuneiform osteotomy (double osteotomy). When a phalangeal osteotomy was added, the procedure was termed a "triple osteotomy." The average age of the patients at the time of surgery was 26 years. At final follow-up, the average hallux valgus correction measured 23 degrees and the average 1-2 intermetatarsal angle correction was 9 degrees. The DMAA averaged 23 degrees preoperatively and was corrected to an average of 9 degrees postoperatively. One patient developed a postoperative hallux varus deformity, and one patient developed a malunion, both of which required a second surgery. A hallux valgus deformity with an increased DMAA can be successfully treated with multiple first ray osteotomies that maintain articular congruity of the first metatarsophalangeal joint.     

Ulnar shortening osteotomy in idiopathic ulnar impaction syndrome

BACKGROUND: Idiopathic ulnar impaction syndrome can be defined as a degenerative condition of the ulnar aspect of the wrist in patients with congenital or dynamic positive ulnar variance without a history of fracture or premature physeal arrest. The purpose of this study was to evaluate the clinical features of idiopathic ulnar impaction syndrome and the outcomes of ulnar shortening osteotomy for this group of patients. METHODS: Thirty-one wrists in twenty-nine patients with idiopathic ulnar impaction syndrome were treated with an ulnar shortening osteotomy. Ulnar variance was measured on an anteroposterior radiograph of the wrist, and radioulnar distance was measured on a lateral radiograph, with the forearm in neutral rotation, to evaluate any displacement of the ulnar head from the distal aspect of the radius. All patients were followed clinically and radiographically for a mean of thirty-two months. RESULTS: An average preoperative ulnar variance of +4.6 mm (range, 2 to 7.5 mm) was reduced to an average of -0.7 mm (range, -4 to +1 mm) postoperatively. Preoperatively, the modified Gartland and Werley score was an average (and standard deviation) of 69.5 +/- 7.6, with twenty-four wrists rated poor and seven rated fair. Postoperatively, the score improved to an average of 92.5 +/- 8.0, with twenty-four wrists rated excellent; five, good; one, fair; and one, poor. Dorsal subluxation of the distal aspect of the ulna was found concomitantly in nine wrists, and it was found to be reduced by the shortening osteotomy. Seven patients had cystic changes in the carpal bones preoperatively, but these were not evident one to two years after the operation. CONCLUSIONS: Ulnar shortening osteotomy improved wrist function in patients with idiopathic ulnar impaction syndrome and reduced the subluxation of the distal radioulnar joint, which is commonly found in these patients. Degenerative cystic changes of the ulnar carpal bones appear to resolve following the shortening osteotomy.     

Radial osteotomy for Kienböck disease

Of various surgical treatments, radial shortening for patients with negative ulnar variance and radial wedge osteotomy (radial closing osteotomy) for patients with 0 or positive ulnar variance are widely accepted for the treatment of Kienb?ck disease. Long-term follow-up studies have shown more than 10 years lasting satisfactory pain relief, as well as an increase in wrist range of motion and grip strength. As representative surgical procedures, the techniques of radial shortening by transverse osteotomy, using a locking compression plate for internal fixation, and radial wedge osteotomy by step-cut osteotomy, using a small dynamic compression plate or locking compression plate, are described. One important point of radial wedge osteotomy is that resection of simple wedge bone yields a decrease in ulnar variance; therefore, we recommend trapezoidal bone resection with ulnar height of 1 mm for transverse osteotomy at the metaphysis and ulnar height of 2 mm for step-cut osteotomy at the distal fourth of the radius.     

Effect of increasing distal medial closing wedge metatarsal osteotomies on the distal metatarsal articular angle

The recognition, definition, and management of the congruent hallux valgus deformity continue to evolve. To correct the skeletal deformity and maintain joint congruity, many authors have emphasized the importance of extra-articular procedures. One such procedure is a distal medial closing wedge osteotomy of the first metatarsal. Unfortunately, there are few guidelines to help determine the pre- and intraoperative size of the medial wedge to obtain the desired correction of the distal metatarsal articular angle (DMAA). The purpose of this study was to quantify the effects of increasing distal medial closing wedge osteotomies on the DMAA in an in vitro cadaver model. In this study, a closing wedge osteotomy was performed 2 cm proximal to the articular surface, removing wedges measuring 2 mm, 4 mm, and 6 mm in width. The mean preoperative DMAA was 8.5 degrees, and the mean postoperative DMAAs after 2-mm, 4-mm, and 6-mm closing wedge osteotomies were -2.6 degrees, -10.2 degrees, and -20.2 degrees, respectively. The data showed that for every 1 mm of closing wedge osteotomy, the DMAA decreased by 4.7 degrees +/- 0.6 degrees. These results can be used for pre- and intraoperative planning when surgically correcting a congruent hallux valgus deformity with a distal medial closing wedge osteotomy of the first metatarsal. Additional information obtained from this cadaver study includes (1) increased shortening of the first metatarsal and (2) incongruity produced at the joint after the medial-based osteotomy. The amount of shortening of the first metatarsal correlated directly with the size of the medial-based wedge. The second point indicates that a lateral soft-tissue release may still be required when using this method of reorienting the DMAA.     

Ulnar shortening osteotomy with a premounted sliding-hole plate

BACKGROUND: Ulnar shortening osteotomy represents a common procedure for various ulnar-sided wrist disorders but is still associated with complications like malrotation, angulation, or nonunion because of incomplete closure of the osteotomy gap. We describe the use of a newly developed palmarly placed sliding-hole dynamic compression plate that allows fixation of the ulna before the oblique osteotomy is carried out. METHODS: We performed ulnar shortening osteotomy on 27 consecutive patients. The indication was ulnar impaction syndrome in 25 patients and symptomatic ulnar plus variance secondary to malunited distal radial fracture in 2 patients. The mean preoperative ulnar variance was +2.1 mm (range, +1 mm to +8 mm). All patients were evaluated before and after surgery and graded with the Disability of Arm-Shoulder-Hand (DASH) scoring system. RESULTS: All 27 osteotomies healed uneventfully over an average of 9.2 +/- 2.1 weeks. The mean postoperative ulnar variance was -2.1 mm (range, -3.1 mm to 0 mm). There were significant improvements in DASH score, pain, and grip strength at an average follow-up of 8.1 months. Six patients complained of plate irritation. CONCLUSION: Favorable results suggest that ulnar shortening osteotomy using an oblique osteotomy and a premounted sliding-hole compression plate avoids malrotation and angulation and is associated with satisfactory outcomes. This device does not require an assisting device, which minimizes the surgical exposure of the ulna. Palmar placement of the plate seems to reduce hardware irritation.     

Volar ligament release and distal radius dome osteotomy for correction of Madelung's deformity

PURPOSE: Madelung's deformity is usually recognized near the completion of skeletal growth and corrective osteotomy of the radius is frequently performed to treat the deformity and reduce pain. This study reviewed the clinical and radiographic results of a volar approach, ligament release, and dome osteotomy technique for treatment of this deformity. METHODS: Between 1990 and 2000, 26 wrists in 18 patients were treated with a volar ligament release and dome osteotomy of the distal radius. The average age of the patients at the time of surgery was 13 years. All patients were available for review at an average of 23 months after surgery. Radiographs before surgery and at final follow-up evaluation were analyzed for the extent of correction. RESULTS: All patients treated with this corrective osteotomy reported a reduction in pain and improved appearance. Patients showed improvements in forearm supination and wrist extension, with no loss of pronation or flexion. Improvements in the radiographic parameters of radial inclination and lunate subsidence also were observed. Four wrists required concurrent ulnar-sided surgery, and 3 additional wrists required staged ulnar shortening. One patient required a Darrach resection 3 years after the index procedure. CONCLUSIONS: The results of volar dome osteotomy provide improved range of motion, improved appearance, radiographic correction, and pain relief while preserving soft-tissue support for radial rotation around the distal ulna. Long-term follow-up evaluation is ongoing.     

Wedge osteotomies of the radius for Kienb?ck's disease: a biomechanical analysis.

We compared changes in lunate cortical strain with an applied physiologic load by altering radial inclination to simulate opening and closing wedge osteotomies of the distal radius. Nineteen fresh-frozen cadaver arms were mounted in neutral position and tested under axial compression at a physiologic load by means of a repeated-measures design. Principal compressive strains were measured with rosette strain gauges mounted on the lunate's palmar and dorsal cortices. Distal radius osteotomy and custom external fixator allowed for altering radial inclination in progressive 3 degrees increments both by increasing and decreasing radial inclination in each specimen. Maximum principal strain was recorded for each inclination increment and compared with control. Comparison of all data showed a 26% decrease on lunate cortical strain for the radial opening wedge osteotomy and a 24% increase for the radial closing wedge osteotomy. This difference was statistically significant. No significant differences were found between individual angular increments (3 degrees to 15 degrees). The radial opening wedge osteotomy was more effective than the radial closing wedge osteotomy at diminishing lunate strain. The results validate the biomechanical effectiveness of this extra-articular osteotomy, which is intended to minimize alteration of ulnar variation.     

Computer-assisted distal radius osteotomy

PURPOSE: To establish the accuracy, precision, and clinical feasibility of a novel technique of computer-assisted distal radius osteotomy for the correction of symptomatic distal radius malunion. METHODS: Six patients underwent a computer-assisted distal radius osteotomy and were followed-up for an average of 25 months. Objective radiographic measurements and functional outcomes, as measured by clinical examination including grip strength and range of motion, and Disability of the Arm, Shoulder and Hand (DASH) questionnaires, were used. RESULTS: The mean radiographic parameters included an increase of radial inclination to 21 degrees from 12 degrees (normal, 23 degrees ). Dorsal and volar tilt (malunion) were corrected to 9 degrees from -30 degrees and 21 degrees, respectively (normal, 10 degrees ). Ulnar variance was corrected to 1.9 mm from 7.5 mm (normal, +1.5 mm). Normal is defined as the average of the contralateral limb radiographs. The mean clinical outcome measures at an average of 25 months included a DASH global score of 14, a DASH individual item average score of 1.6, and an average affected side grip strength of 79% when compared with the unaffected side. CONCLUSIONS: The results of the computer-assisted technique were comparable with published results of traditional non-computer-assisted opening wedge osteotomy techniques. This technique allows a surgeon to accurately and precisely recognize and correct 3-dimensional deformities of the distal radius including axial malalignment (supination). The technique has the added benefit of reducing radiation exposure to the patient and surgical team because fluoroscopy is not used during the procedure. Additional benefits of the computer-assisted technique include the ability to perform multiple surgical simulations to optimize the alignment plan, and it serves as an excellent teaching tool for less-experienced surgeons.