Effect of molecular weight of thermoreversible polymer on in vivo retention of rhBMP-2.

To investigate the effect of polymer molecular weight (MW) on rhBMP-2 delivery by thermoreversible polymers, four polymers with similar lower critical solution temperatures (20 degrees -22 degrees C) but different MWs were studied. Thermoreversible polymers were based on N-isopropylacrylamide (NiPAM), ethyl methacrylate (EMA), and N-acryloxysuccinimide (NASI), and had MWs of either approximately 49 kDa or approximately 400 kDa. The NASI content was either 0 or 1-1.6%. High MW polymers, irrespective of their NASI content, formed a stable gel with significantly lower water uptake and exhibited a dense micelle with average pore size smaller than the low MW polymers. NiPAM/EMA polymers without NASI did not conjugate with recombinant human bone morphogenetic protein-2 (rhBMP-2). NiPAM/EMA polymers containing NASI, however, gave conjugation with rhBMP-2. For polymers without NASI, a high MW was essential for rhBMP-2 retention when injected intramuscularly in Sprague-Dawley rats. For NASI-containing polymers, the MW of the polymer did not make a significant difference because rhBMP-2 retention was equivalent for different size polymers. We conclude that polymer MW affects rhBMP-2 retention in vivo in polymers designed for physical entrapment of rhBMP-2, but not in polymers designed for chemical conjugation with rhBMP-2.     

Synthetic thermoreversible polymers are compatible with osteoinductive activity of recombinant human bone morphogenetic protein 2

Recombinant human bone morphogenetic protein 2 (rhBMP-2) is currently in clinical studies as part of an implantable device that contains a biomaterial carrier. Implant retention of rhBMP-2 by the biomaterial carrier is important for the osteoinductive activity. To control in situ retention of rhBMP-2, thermoreversible polymers were synthesized and characterized, and their compatibility with rhBMP-2-induced osteoinduction was investigated. The results indicated that polymers with a controlled "solubility <--> insolubility" transition temperature could be prepared from N-isopropylacrylamide, ethylmethacrylate, and N-acryloxysuccinimide (NASI). NASI-containing polymers were able to conjugate to rhBMP-2 without additional cross-linkers. Implantation in the rat ectopic model, where alkaline phosphatase and calcium deposition were utilized as markers of osteoinductive activity, indicated that rhBMP-2 mixed with the polymers were effective for osteoinduction. Moreover, rhBMP-2 conjugated to the chosen polymers was as effective as native rhBMP-2 in inducing ALP activity and calcium deposition. We conclude that thermoreversible polymers are compatible with rhBMP-2-induced osteogenesis and can serve as novel biomaterials for rhBMP-2 delivery.     

Controlling the orientation of bone osteopontin via its specific binding with collagen I to modulate osteoblast adhesion

Osteopontin (OPN) is an important matricellular protein that modulates cell functions. It is potentially an excellent surface-coating component for engineered biomaterials. It is believed that in its preferred orientation and conformation on a surface, the functional domains of OPN such as the arginine-glycine-aspartic acid (RGD) motif will be presented to cells to the greatest extent. Previously, the authors demonstrated that OPN orientation could be modulated by surface charge. In this work, the authors attempt to control the orientation/conformation of bone OPN via its specific interactions with type I collagen. Surface plasmon resonance was used to confirm the specific binding between bone OPN and collagen I. A radiolabeled OPN adsorption assay was used to determine the amount of adsorbed OPN on tissue culture polystyrene (TCPS) surfaces with or without collagen I as an interlayer. An in vitro cell adhesion assay using osteoblast MC3T3-E1 was performed to compare the functionality of collagen-bound OPN and adsorbed OPN on TCPS. With the same amount of OPN on the surfaces, the number of cells adhered to collagen-bound OPN is significantly higher than to OPN alone on TCPS. A cell inhibition assay using soluble GRGDSP peptides showed that a higher GRGDSP concentration was needed to completely block osteoblast adhesion to collagen-bound OPN than to OPN directly on TCPS. Enhanced cell adhesion and higher blocking peptide concentration suggest that collagen-bound bone OPN has a preferable orientation/conformation for cell adhesion compared with OPN alone on TCPS. Thus, the specific binding of OPN to collagen I may naturally orient OPN, thus influencing osteoblast adhesion.     

Human endothelial cell interaction with biomimetic surfactant polymers containing Peptide ligands from the heparin binding domain of fibronectin

Biomimetic materials that mimic the extracellular matrix (ECM) provide a means to control cellular functions such as adhesion and growth, which are vital to successful engineering of tissue-incorporated biomaterials. Novel "ECM-like" biomimetic surfactant polymers consisting of a poly(vinyl amine) backbone with pendant cell-adhesive peptides derived from one of the heparin-binding domains of fibronectin were developed to improve endothelial cell adhesion and growth on vascular biomaterials. Heparin-binding peptide (HBP) sequences, alone and in combination with RGD peptides, were examined for their ability to promote human pulmonary artery endothelial cell (HPAEC) adhesion and growth (HBP1, WQPPRARI; HBP2, SPPRRARVT; HBP1:RGD; and HBP2:RGD) and compared with cell adhesion and growth on fibronectin and on negative control polymer surfaces in which alanines were substituted for the positively charged arginine residues in the two peptides. The results showed that HPAECs adhered and spread equally well on all HBP-containing polymers and the positive fibronectin control, showing similar stress fiber and focal adhesion formation. However, the HBP alone was unable to support long-term HPAEC growth and survival, showing a loss of focal adhesions and cytoskeletal disorganization by 24 h after seeding. With the addition of RGD, the surfaces behaved similarly or better than fibronectin. The negative control polymers showed little to no initial cell attachment, and the addition of soluble heparin to the medium reduced initial cell adhesion on both the HBP2 and HBP2:RGD surfaces. These results indicate that the HBP surfaces promote initial HPAEC adhesion and spreading, but not long-term survival.     

Behaviour of mesenchymal stem cells, fibroblasts and osteoblasts on smooth surfaces

Understanding of the interactions between cells and surfaces is essential in the field of tissue engineering and biomaterials. This study aimed to compare the adhesion, proliferation and differentiation of human mesenchymal stem cells (hMSCs), an osteoblast cell line (MC3T3-E1) and gingival fibroblasts (HGF-1) on tissue culture polystyrene (TCPS), glass and titanium (Ti). The average surface roughness was 5, 0.2 and 40×10(-3) μm for TCPS, glass and Ti, respectively. Immunocytochemistry and image analysis made it possible to quantify the number and morphology of adherent cells as well as the density of the focal points. Regardless of the substrate, both hMSCs and osteoblastic cells were mainly branch-shaped. HGF-1 exhibited a significantly higher number of focal points on Ti than on TCPS and glass. Alizarin red quantification indicated that both hMSCs and osteoblastic cells were more differentiated on TCPS than on Ti and glass. The surface properties of substrates, such as roughness, wettability and chemical composition, modulated the behaviour of the cells. Early events, such as cell adhesion, may influence the differentiation of hMSC and consequently tissue healing around implanted biomaterials.     

Extracellular matrix production by human osteoblasts cultured on biodegradable polymers applicable for tissue engineering

The nature of the extracellular matrix (ECM) is crucial in regulating cell functions via cell-matrix interactions, cytoskeletal organization, and integrin-mediated signaling. In bone, the ECM is composed of proteins such as collagen (CO), fibronectin (FN), laminin (LM), vitronectin (VN), osteopontin (OP) and osteonectin (ON). For bone tissue engineering, the ECM should also be considered in terms of its function in mediating cell adhesion to biomaterials. This study examined ECM production, cytoskeletal organization, and adhesion of primary human osteoblastic cells on biodegradable matrices applicable for tissue engineering, namely polylactic-co-glycolic acid 50:50 (PLAGA) and polylactic acid (PLA). We hypothesized that the osteocompatible, biodegradable polymer surfaces promote the production of bone-specific ECM proteins in a manner dependent on polymer composition.We first examined whether the PLAGA and PLA matrices could support human osteoblastic cell growth by measuring cell adhesion at 3, 6 and 12h post-plating. Adhesion on PLAGA was consistently higher than on PLA throughout the duration of the experiment, and comparable to tissue culture polystyrene (TCPS). ECM components, including CO, FN, LM, ON, OP and VN, produced on the surface of the polymers were quantified by ELISA and localized by immunofluorescence staining. All of these proteins were present at significantly higher levels on PLAGA compared to PLA or TCPS surfaces. On PLAGA, OP and ON were the most abundant ECM components, followed by CO, FN, VN and LN. Immunofluorescence revealed an extracellular distribution for CO and FN, whereas OP and ON were found both intracellularly as well as extracellularly on the polymer. In addition, the actin cytoskeletal network was more extensive in osteoblasts cultured on PLAGA than on PLA or TCPS.In summary, we found that osteoblasts plated on PLAGA adhered better to the substrate, produced higher levels of ECM molecules, and showed greater cytoskeletal organization than on PLA and TCPS. We propose that this difference in ECM composition is functionally related to the enhanced cell adhesion observed on PLAGA. There is initial evidence that specific composition of the PLAGA polymer favors the ECM. Future studies will seek to optimize ECM production on these matrices for bone tissue engineering applications.     

结合RGD肽的聚酯材料表面粘附内皮细胞的抗剪切力研究

精氨酸-甘氨酸-天门冬氨酸(RGD)是许多粘附蛋白的高度保守氨基酸序列.生物材料表面结合RGD肽有助于内皮细胞在材料上的粘附、迁移和增殖.本研究在体外流动条件下观察结合RGD肽或纤维粘连蛋白的聚酯材料表面粘附内皮细胞的抗剪切能力,并通过观察肌动蛋白和踝蛋白的表达初步探讨影响细胞粘附稳定性的机制.结果显示材料表面结合RGD或纤维粘连蛋白可以增加细胞的粘附强度,提高抗剪切能力;而RGD和纤维粘连蛋白导致的细胞抗剪切能力增加可能与细胞内肌动蛋白和踝蛋白的表达增加有关.     

DRAGON, a GPI-anchored membrane protein, inhibits BMP signaling in C2C12 myoblasts

Bone morphogenetic proteins (BMPs) induce osteoblastic differentiation of myoblasts via binding to cell surface receptors. Repulsive guidance molecules (RGMs) have been identified as BMP co-receptors. We report here that DRAGON/RGMb, a member of the RGM family, suppressed BMP signaling in C2C12 myoblasts via a novel mechanism. All RGMs were expressed in C2C12 cells that were differentiated into myocytes and osteoblastic cells, but RGMc was not detected in immature cells. In C2C12 cells, only DRAGON suppressed ALP and Id1 promoter activities induced by BMP-4 or by constitutively activated BMP type I receptors. This inhibition by DRAGON was dependent on the secretory form of the von Willbrand factor type D domain. DRAGON even suppressed BMP signaling induced by constitutively activated Smad1. Over-expression of neogenin did not alter the inhibitory capacity of DRAGON. Taken together, these findings indicate that DRAGON may be an inhibitor of BMP signaling in C2C12 myoblasts. We also suggest that a novel molecule(s) expressed on the cell membrane may mediate the signal transduction of DRAGON in order to suppress BMP signaling in C2C12 myoblasts.     

Staphylococcus aureus adhesion to titanium oxide surfaces coated with non-functionalized and peptide-functionalized poly(L-lysine)-grafted-poly(ethylene glycol) copolymers

Implanted biomaterials are coated immediately with host plasma constituents, including extracellular matrix (ECM); this reaction may be undesirable in some cases. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) has been shown to spontaneously adsorb from aqueous solution onto metal oxide surfaces, effectively reducing the degree of non-specific adsorption of blood and ECM proteins, and decreasing the adhesion of fibroblastic and osteoblastic cells to the coated surfaces. Cell adhesion through specific peptide-integrin receptors could be restored on surfaces coated with PLL-g-PEG functionalized with peptides of the RGD (Arg-Asp-Gly) type. To date, no study has examined the effect of surface modifications by PLL-g-PEG-based polymers on bacterial adhesion. The ability of Staphylococcus aureus to adhere to the ECM and plasma proteins deposited on biomaterials is a significant factor in the pathogenesis of medical-device-related infections. This study describes methods for visualizing and quantifying the adhesion of S. aureus to smooth and rough (chemically etched) titanium surfaces without and with monomolecular coatings of PLL-g-PEG, PLL-g-PEG/PEG-RGD and PLL-g-PEG/PEG-RDG. The different surfaces were exposed to S. aureus cultures for 1-24h and bacteria surface density was evaluated using scanning electron microscopy and fluorescence microscopy. Coating titanium surfaces with any of the three types of copolymers significantly decreased the adhesion of S. aureus to the surfaces by 89-93% for PLL-g-PEG, and 69% for PLL-g-PEG/PEG-RGD. Therefore, surfaces coated with PLL-g-PEG/PEG-RGD have the ability to attach cells such as fibroblasts and osteoblasts while showing reduced S. aureus adhesion, resulting in a selective biointeraction pattern that may be useful for applications in the area of osteosynthesis, orthopaedic and dental implantology.     

Either integrin subunit beta1 or beta3 is involved in mediating monocyte adhesion, IL-1beta protein and mRNA expression in response to surfaces functionalized with fibronectin-derived peptides

We synthesized gelatin-based, interpenetrating network (IPN) scaffolds immobilized with fibronectin (FN)-derived peptides to assess monocyte-biomaterial interaction. Human primary monocytes were seeded onto peptide-grafted IPN or tissue-culture polystyrene (TCPS) pre-adsorbed with FN or FN-derived peptides. Monocyte cell density on both TCPS and IPN surfaces was higher in the presence of the arginine-glycine-aspartic acid (RGD) peptide. Pretreatment with anti-integrin beta1 or beta3 antibody decreased monocyte density on all ligand-modified TCPS and IPN. Interleukin-1 beta (IL-1beta) protein levels of cells on modified TCPS decreased over time. IL-1beta expression of monocytes in the presence of IPNs peaked at 24 h and then decreased through 168 h. Ligand identity did not affect IL-1beta expression in either TCPS or IPN samples. Pretreatment with anti-integrin beta1 or beta3 antibody reduced IL-1beta levels from both TCPS and IPN samples in a ligand-independent manner, particularly at 24 h. Monocytic IL-1beta mRNA expression in IPN samples without antibody pretreatment was highest at 2 h and decreased over time. IL-1beta mRNA expression in cells with anti-integrin beta1 or beta3 antibody pretreatment was similar to those without antibody pretreatment, except for methoxygrafted IPN samples. The change in IL-1beta mRNA expression did not correlate with changes in protein expression. The results indicate that monocyte adhesion was affected by the substrate and the RGD sequence and beta1 or beta3 containing integrin receptors. beta1- or beta3-containing integrin receptors were also involved in IL-1beta gene and protein expression in monocytes adhered to gelatin-based biomaterial surfaces.     

BMP stimulation of alkaline phosphatase activity in pluripotent mouse C2C12 cells is inhibited by dermatopontin, one of the most abundant low molecular weight proteins in demineralized bone matrix

Demineralized bone matrix (DBM) is a complex mixture of osteoinductive bone morphogenetic proteins (BMPs), as well as BMP-binding proteins that regulate BMP bioactivity and localization. Our aim was to use modern proteomic methods to identify additional BMP-binding proteins in DBM, with initial emphasis on the most abundant. Relatively large, water-soluble noncollagenous proteins (NCPs) were preferentially extracted from DBM with alkalinized urea. The insoluble residue, which contained the BMP activity, was extracted with GuHCl/CaCl2, dialyzed versus citrate, defatted, resuspended in GuHCl, dialyzed sequentially against Triton X-100 and water, pelleted, and lyophilized. The proteins in this pellet were fractionated by hydroxyapatite affinity chromatography. Proteins that copurified with BMP bioactivity were separated by SDS-PAGE. Distinct bands were excised, and the proteins in them were reduced and alkylated, digested with trypsin, eluted, and subjected to MALDI/ToF MS (matrix-assisted laser-desorption ionization time-of-flight mass spectrometry). Computer-assisted peptide fingerprint analysis of the MS profiles was used to identify C-terminal lysine-6-oxidase; dermatopontin (DPT); histones H2A2, H2A3, and H2B; and trace amounts of gamma-actin. DPT is a 22-kDa, tyrosine-rich acidic matrix protein not previously recognized to be among the most abundant small proteins to copurify with BMP bioactivity in DBM. We tested the effects of DPT on BMP-2 stimulation of alkaline phosphatase (ALP) activity in C2C12 cells. BMP-2 stimulated ALP activity in C2C12 cells by 6.2-fold above basal levels. DPT alone had no effect on ALP activity in C2C12 cells. When added with BMP-2, DPT blocked 40% of the stimulatory effect of BMP-2 on ALP activity in C2C12 cells. DPT is an abundant protein in DBM, and it can inhibit the stimulatory effects of BMP-2 on ALP activity in C2C12 cells.     

Culturing INS-1 cells on CDPGYIGSR-, RGD- and fibronectin surfaces improves insulin secretion and cell proliferation

Rat insulinoma cells (INS-1), an immortalized pancreatic beta cell line, were cultured on low-fouling carboxymethyl-dextran (CMD) layers bearing fibronectin, the tripeptide Arg-Gly-Asp (RGD) or CDPGYIGSR, a laminin nonapeptide. INS-1 cells were non-adherent on CMD and RGE but adhered to fibronectin- and peptide-coated CMD surfaces and to tissue culture polystyrene (TCPS). On CMD bearing fibronectin and the peptides, INS-1 cells showed higher glucose-stimulated insulin secretion compared to those on TCPS, bare CMD and RGE. INS-1 cells experienced a net cell growth, with the lowest found after 7 days on CMD and the highest on fibronectin. Similarly, cells on RGD and CDPGYIGSR showed lower net growth rates than those on fibronectin. Expression of E-cadherin and integrins αvβ3 and α5 were similar between the conditions, except for α5 expression on fibronectin, RGD and CDPGYIGSR. Larger numbers of Ki-67-positive cells were found on CDPGYIGSR, TCPS, fibronectin and RGD. Cells in all conditions expressed Pdx1.     

Enhancing hepatocyte adhesion by pulsed plasma deposition and polyethylene glycol coupling

Decreased hepatocyte adhesion to polymeric constructs limits the function of tissue engineered hepatic assist devices. We grafted adhesion peptides (RGD and YIGSR) to polycaprolactone (PCL) and poly-L-lactic acid (PLLA) in order to mimic the in vivo extracellular matrix and thus enhance hepatocyte adhesion. Peptide grafting was done by a novel technique in which polyethylene glycol (PEG)-adhesion peptide was linked to allyl-amine coated on the surface of PCL and PLLA by pulsed plasma deposition (PPD). Peptide grafting density, quantified by radio-iodinated tyrosine in YIGSR, was 158 fmol/cm(2) on PLLA and 425 fmol/cm(2) on PCL surfaces. The adhesion of hepatocytes was determined by plating 250,000 hepatocytes/well (test substrates were coated on 12 well plates) and quantifying the percentage of adhered cells after 6 h by MTT assay. Adhesion on PCL surfaces was significantly enhanced (p < 0.05) by both YIGSR (percentage of adhered cells = 53 +/- 7%) and RGD (53 +/- 12%) when compared to control surfaces (31 +/- 8%). Hepatocyte adhesion on PLLA was significantly (p < 0.05) enhanced on PLLA-PEG-RGD surfaces (76 +/- 14%) compared to control surfaces (42 +/- 19%) and more (68 +/- 25%) but not statistically significant (p = 0.15) on PLLA-PEG-YIGSR surfaces compared to control surfaces. These results indicate that hepatocyte adhesion to PCL and PLLA based polymeric surfaces can be enhanced by a novel adhesion peptide grafting technique using pulsed plasma deposition and PEG cross-linking.     

BMP Stimulation of Alkaline Phosphatase Activity in Pluripotent Mouse C2C12 Cells is Inhibited by Dermatopontin,One of the Most Abundant Low Molecular Weight Proteins in Demineralized Bone Matrix

Demineralized bone matrix (DBM) is a complex mixture of osteoinductive bone morphogenetic proteins (BMPs), as well as BMP-binding proteins that regulate BMP bioactivity and localization. Our aim was to use modern proteomic methods to identify additional BMP-binding proteins in DBM, with initial emphasis on the most abundant. Relatively large, water-soluble noncollagenous proteins (NCPs) were preferentially extracted from DBM with alkalinized urea. The insoluble residue, which contained the BMP activity, was extracted with GuHCl/CaCl₂, dialyzed versus citrate, defatted, resuspended in GuHCl, dialyzed sequentially against Triton X-100 and water, pelleted, and lyophilized. The proteins in this pellet were fractionated by hydroxyapatite affinity chromatography. Proteins that copurified with BMP bioactivity were separated by SDS-PAGE. Distinct bands were excised, and the proteins in them were reduced and alkylated, digested with trypsin, eluted, and subjected to MALDI/ToF MS (matrix-assisted laser-desorption ionization time-of-flight mass spectrometry). Computer-assisted peptide fingerprint analysis of the MS profiles was used to identify C-terminal lysine-6-oxidase; dermatopontin (DPT); histones H2A2, H2A3, and H2B; and trace amounts of γ-actin. DPT is a 22-kDa, tyrosine-rich acidic matrix protein not previously recognized to be among the most abundant small proteins to copurify with BMP bioactivity in DBM. We tested the effects of DPT on BMP-2 stimulation of alkaline phosphatase (ALP) activity in C2C12 cells. BMP-2 stimulated ALP activity in C2C12 cells by 6.2-fold above basal levels. DPT alone had no effect on ALP activity in C2C12 cells. When added with BMP-2, DPT blocked 40% of the stimulatory effect of BMP-2 on ALP activity in C2C12 cells. DPT is an abundant protein in DBM, and it can inhibit the stimulatory effects of BMP-2 on ALP activity in C2C12 cells.     

MG63 osteoblastic cell adhesion to the hydrophobic surface precoated with recombinant osteopontin fragments

The hydrophobicity of biomaterials has been recognized as a limitation to the adequate function of anchorage-dependent cells when hydrophobic biomaterials are used for tissue engineering. This is due to flawed solid-state signals from cell adhesion. In this study, a recombinant osteopontin (rOPN17-169) fragment containing the cell adhesion motifs was expressed in E. coli and was precoated on the hydrophobic surface prior to osteoblastic MG63 cell culture. Precoating the hydrophobic surface with rOPN17-169 improved osteoblastic cell adhesion, which was blocked by soluble RGDS. The adhesion of MG63 cells to rOPN17-169 pre-coated surface-activated mitogen-activated protein kinases (MAPK) such as extracellular signal-receptor kinase 1/2, p38, and c-Jun N-terminal kinase (JNK). In addition, p38 MAPK was activated in response to a soluble factor of transforming growth factor-beta in the cells adhered to the hydrophobic surface via rOPN17-169. This suggests that rOPN17-169 precoated on the hydrophobic surface can allow osteoblastic cells to generate adhesion signals sufficient for cell adhesion, MAPK activation, and the cytokine activation of osteoblastic cells.     

由BMP-4基因转入C2C12细胞引起的成肌细胞到成骨细胞的表型转变

目的:研究BMP-4基因对C2C12细胞分化的影响。方法:BMP-4基因在pCI-neo质粒中构建后转入C2C12细胞。转入pCI-neo-BMP-4重组质粒的细胞、转入pCI-neo质粒的细胞及没有转染的细胞在相同的条件下培养。结果:转入pCI-neo质粒的细胞及没有转染的细胞在增殖期和分化期均不表达BMP-4,在未分化期表现为典型的星形形态,并相互融合成细长而多核的肌小管。而转入pCI-neo-BMP-4重组质粒的细胞在增殖期和分化期均大量表达BMP-4,形态上不形成肌小管,而是形成类似成骨细胞的形态,并高水平表达碱性磷酸酶、在培养基中分泌骨钙素。结论:表明将BMP-4基因转入C2C12细胞可改变其肌源的分化途径,而分化为成骨细胞系,且这种分化转向是基因水平上的。     

The use of biotin-avidin binding to facilitate biomodification of thermoresponsive culture surfaces

Here, we report biomodification of temperature-responsive culture surfaces with biotinylated biomolecules utilizing streptavidin and biotinylation of the surfaces. Poly(N-isopropylacrylamide-co-2-carboxyisopropylacrylamide) was covalently grafted onto tissue culture polystyrene (TCPS) dishes. Biotinylated Arg-Gly-Asp-Ser (RGDS) peptides with different spacer lengths (biotin-conjugated G_nRGDS (n=1, 6, 12, 16)) were examined. Human umbilical vein endothelial cells (HUVECs) adhered and were well spread on G₁₂RGDS-immobilized surfaces in the absence of serum at 37 °C, while much less cell adhesion was observed with the other peptides. Adhered HUVECs were detached on reducing temperature to 20 °C, or on adding free RGDS peptide. Interestingly, cell detachment was accelerated by applying both these techniques. Consequently, by optimizing the spacer length, biomolecules can be functionally immobilized onto thermoresponsive surfaces via the affinity binding between avidin and biotin.     

Biometric surfactant polymers designed for shear-stable endothelialization on biomaterials

We have developed a series of extracellular matrix (ECM)-like biomimetic surfactant polymers to improve endothelial cell adhesion and growth on vascular biomaterials. These polymers provide a single-step procedure for modifying the surface of existing biomaterials and consist of a poly(vinyl amine) (PVAm) backbone with varying ratios of cell-binding peptide (RGD) to carbohydrate (maltose), ranging from 100% RGD:0% maltose to 50% RGD:50% maltose. Three biomimetic surfaces, as well as a fibronectin (FN)-coated glass surface were seeded at confluence with human pulmonary artery endothelial cells (HPAECs) and exposed to shear stresses ranging from 0-40.6 dyn/cm2 for periods of 2 h and 6 h. Surfaces were examined for HPAEC coverage and cytoskeletal arrangement as a function of time and shear stress. In general, after 6 h of shear exposure, EC retention on 100% RGD > FN > 75% RGD > 50% RGD. The 100% RGD surface maintained more than 50% of its initial EC monolayer at low to moderate shear stresses whereas all other surfaces dropped to approximately 40% or less in the same shear stress range. The most stable surface, 100% RGD, showed a significant increase in cytoskeletal organization at all shear stresses greater than 2.5 dyn/cm2. In contrast, there was no real change in cytoskeletal organization on the FN surface, and there was a decrease on the 75% RGD surface over time. These results indicate that increasing surface peptide density can control EC shear stability. Furthermore, improved shear stability increases with increasing peptide density and is related to the EC's ability to reorganize its cytoskeleton.