Human osteoblast-like cells response to nanofunctionalized surfaces for tissue engineering

Cells are sensitive both to the micro/nanotopographic and chemical features of their surrounding environment. The engineering of the surface properties of biomaterials is then critical to develop bioactive devices with which to elicit appropriate cellular responses. To this regard, the layer by layer (LBL) self assembly technique represents a simple and versatile method to modify surface properties by the deposition of ultrathin films with specific and predetermined properties. In this work biomimetic coatings containing fibronectin, an adhesive glycoprotein of the extracellular matrix, were assembled by means of the LBL technique, and tested for the growth of MG63 human osteoblast-like cells, in order to evaluate their potential for the treatment of materials employed in bone-tissue engineering. As a first step the assembly process was optimized by quartz crystal microbalance measurements and subsequently was repeated on nickel/titanium, silicon and glass samples. The results obtained from the investigation of cell response to the modified surfaces, put in evidence that the deposited nanostructured ultrathin films are effective in promoting cell proliferation. Our results show the high potential of the developed bioactive coatings for the engineering of biomimetic implants and for the optimization of their integration with the surrounding tissues.     

Influence of titanium surfaces on attachment of osteoblast-like cells in vitro

Implant surface topography influences osteoblastic proliferation, differentiation and extracellular matrix protein expressions. Studies on preliminary interactions of osteoblast-like cells on implant interface through in vitro systems, can give lucid insights to osseo-integrative efficacies of when in vivo implants. In the present investigation two titanium surfaces of dental implants, a sandblasted and acid-etched surface and an experimental grooved surface were compared through in vitro systems. The titanium implants were seeded with osteoblast-like primary cells and maintained for a period of 1-7 days. Expressions of fibronectin and osteonectin were assessed through immunogold labelling by scanning electron microscopy. The grooved surface, supported better osteoblastic cell adhesion and proliferation than the rough surfaces. Further, osteoblastic cells on the grooved surfaces also displayed a strong labelling for fibronectin at the cytoplasmic extensions coupled with intense osteonectin expression in comparison to the rough surfaced implants. In conclusion, grooved surfaces offered better cell attachment and proliferation than the other rough surfaces studied.     

The attachment and growth behavior of osteoblast-like cells on microtextured surfaces

In previous studies, we showed that the application of microgrooves on a surface can direct cellular morphology and the deposition of mineralized matrix of osteoblast-like cells (Biomaterials 20 (1999) 1293; Clin. Oral Impl Res. 11 (2000) 325). In this study, we evaluated the attachment and growth behavior of these cells, using scanning- and transmission electron microscopy (SEM/TEM). Smooth and microgrooved polystyrene substrates were made (groove depth 0.5-1.5 microm, groove- and ridge width 1-10 microm). On these substrates, osteoblast-like cells were cultured for periods up to 16 days. SEM showed that the cells, and their extensions, closely followed the surface on smooth and wider grooved (>5 microm) substrates. In contrast, narrow grooves (<2 microm) were bridged. After 16 days of incubation, the matrix showed extensive deposition of collagen fibrils, and the formation of calcified nodules. With TEM it was shown that on the smooth and wider grooved substrates, focal adhesions were spread throughout the surface. However, on narrow grooves focal adhesions were always positioned on the edges of surface ridges only. Apparently, most extracellular matrix (ECM) was produced by the cells that directly adhered to the substrate. Deposition of ECM was seen in the surface grooves, as well as in between the cell layers. On basis of the current study and previous experiments, we conclude that microgrooves are able to influence bone cell behavior by (1) determining the alignment of cells and cellular extensions, (2) altering the formation and placement of cell focal adhesions, and (3) altering ECM production. Therefore, microgrooved surfaces seem interesting to be applied on bone-anchored implants.     

Response of rat osteoblast-like cells to microstructured model surfaces in vitro

The role of surface microtopography in combination with different surface wettability for rat calvaria cell differentiation was examined. Mineralization and alkaline phosphatase (ALP) activity of rat calvaria cells on flat polydimethylsiloxane (PDMS) or PDMS contained pyramids which were either hydrophilic or hydrophobic were compared. ALP expressing cells were more frequent on hydrophilic PDMS contained pyramids. ALP activity, peaked at day 9, was highest for hydrophilic pyramids followed by hydrophobic pyramids and flat hydrophilic PDMS surfaces. A similar pattern was obtained with respect to mineralized nodules. These observations showed that micro-sized surface features promote differentiation of rat calvaria cells. Further, hydrophilic surfaces are more prone to stimulate differentiation in comparison with hydrophobic surfaces. The results suggest that both material surface chemistry and topography affect osteoblast differentiation.     

Proliferation and differentiation of osteoblast-like cells on apatite-wollastonite/polyethylene composites

Glass-ceramic apatite-wollastonite (A-W)/high-density polyethylene composite (AWPEX) materials have been designed to match the mechanical strength of human cortical bone and to provide favourable bioactivity, with potential use in many orthopaedic applications. To better understand AWPEX properties, the effects of surface finish and ceramic filler size and content on osteoblast-like cell attachment, proliferation, and differentiation were examined. Glass-ceramic content was tested at 30 and 50 vol% and median particle size at 4.5 and 7.7 microm. Samples were prepared as 1 x 10 x 10 mm(3) tiles with polished or rough surfaces, sterilized by gamma irradiation (2.5 Mrad), and characterized by scanning electron microscopy (SEM) and surface profilometry. Saos-2 human osteoblast-like cells were cultured on each surface at an initial concentration of 4500 cells/cm(2) for 1, 3, or 7 days. At each time point, adenosine triphosphate and alkaline phosphatase levels were measured to assess cell number and osteoblast differentiation. SEM imaging of cells on the composite surfaces showed preferential cell attachment to filler particles within the polymer matrix. Significant biochemical assay differences were found at 7 days, confirmed by ANOVA post-hoc testing using Bonferroni's correction. Overall, increased exposure of the glass-ceramic A-W phase in AWPEX through surface polishing, higher volume fraction and/or larger particle size was found to lead to an improved cell response.     

Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces

The creation of novel bone substitutes requires a detailed understanding of the interaction between cells and materials. This study was designed to test certain polymers, specifically poly(caprolactone) (PCL), poly(D,L-lactic-CO-glycolic acid) (PLGA), and combinations of these polymers for their ability to support bone marrow stromal cell proliferation and differentiation. Bone marrow stromal cells were cultured from New Zealand White rabbits and were seeded onto glass slides coated with a thin layer of PCL, PLGA, and combinations of these two polymers in both a 40:60 and a 10:90 ratio. Growth curves were compared. At the end of 2 weeks, the cells were stained for both matrix mineralization and alkaline phosphatase activity. There was no statistically significant difference in growth rate of the cells on any polymer or polymer combination. However, there was a striking difference in Von Kossa staining and alkaline phosphatase staining. Cells on PCL did not show Von Kossa staining or alkaline phosphatase staining. However, in the 40:60 and 10:90 blends, there was both positive Von Kossa and alkaline phosphatase staining. These data indicate that PCL alone may not be a satisfactory material for the creation of a bone substitute. However, it may be used in combination with PLGA for the creation of a bone substitute material.     

Response of MG63 osteoblast-like cells onto polycarbonate membrane surfaces with different micropore sizes

Response of different types of cells on materials is important for the applications of tissue engineering and regenerative medicine. It is recognized that the behavior of the cell adhesion, proliferation, and differentiation on materials depends largely on surface characteristics such as wettability, chemistry, charge, rigidity, and roughness. In this study, we examined the behavior of MG63 osteoblast-like cells cultured on a polycarbonate (PC) membrane surfaces with different micropore sizes (0.2-8.0 microm in diameter). Cell adhesion and proliferation to the PC membrane surfaces were determined by cell counting and MTT assay. The effect of surface micropore on the MG63 cells was evaluated by cell morphology, protein content, and alkaline phosphatase (ALP) specific activity. It seems that the cell adhesion and proliferation were progressively inhibited as the PC membranes had micropores with increasing size, probably due to surface discontinuities produced by track-etched pores. Increasing micropore size of the PC membrane results in improved protein synthesis and ALP specific activity in isolated cells. There was a statistically significant difference (P<0.05) between different micropore sizes. The MG63 cells also maintained their phenotype under conditions that support a round cell shape. RT-PCR analysis further confirmed the osteogenic phenotype of the MG63 cells onto the PC membranes with different micropore sizes. In results, as micropore size is getting larger, cell number is reduced and cell differentiation and matrix production is increased. This study demonstrated that the surface topography plays an important role for phenotypic expression of the MG63 osteoblast-like cells.     

Modulation of the responses of human osteoblast-like cells to physiologic mechanical strains by biomaterial surfaces

In a previous study we demonstrated that MG-63 cells cultured on Ti-6Al-4V discs covered by alumina ceramic and submitted to intermittent mechanical strain (IMS) presented morphological alteration associated with enhanced differentiation. Here we examine how the mechanical response of osteoblasts can be modulated by the nature of the substrate. MG-63 cells were cultured on four materials: polystyrene and Ti-6Al-4V (average roughness = 0.48 microm) as smooth substrates; Ti-6Al-4V (average roughness = 5.76 microm) and Ti-6Al-4V covered with alumina (average roughness = 5.21 microm) as rough substrates. Mechanical strains were applied for 15 min, three times a day for 1-5 days with a 600 microstrains magnitude and a 0.25 Hz frequency. IMS stimulated alkaline phosphatase activity by 25-35% on all substrates and had no effect on cell growth on either substrate. Fibronectin (FN) was chosen as representative of cell-matrix interaction. FN production was increased by 60% after 1 day of stretching only on alumina-coated discs. FN organization examined on smooth substrates was affected by 5 days of IMS, showing a thickening of the fibres. The same modifications induced by IMS were previously observed on alumina-covered discs. Vinculin expression was not affected by IMS whatever the substrate. Cell-cell interactions were determined by N-cadherin immunoblotting. N-cadherin expression was increased by IMS specifically on rough substrates. Our results suggest that the nature of the surface did not influence the up-regulation of alkaline phosphatase activity induced by IMS, but modulates specifically cell-substrate as well as cell-cell interactions in response to IMS.     

Transwell小室环境下兔成骨样细胞与骨髓基质干细胞的共培养及成骨分化

背景：以往在体外采用地塞米松、生长因子或用成骨样细胞与骨髓间充质干细胞按1∶1混合培养诱导成骨均存在种种局限。 目的：观察在Transwell小室环境下成骨样细胞与骨髓基质干细胞体外共培养及成骨样细胞定向诱导骨髓基质干细胞向成骨细胞分化的可行性。 方法：取第3代乳兔成骨样细胞与第3代兔骨髓基质干细胞接种共培养于Transwell小室内,成骨样细胞接种于培养板底层,骨髓基质干细胞接种于Transwell膜内膜上作为实验组。以骨髓基质干细胞单独接种于Transwell小室内,下层为基础培养液作为对照组。 结果与结论：实验组共培养骨髓基质干细胞明显向成骨细胞分化,细胞碱性磷酸酶活性显著高于对照组(P < 0.05)。实验组骨髓基质干细胞茜素红染色强阳性,可见呈红色结节,经PT-PCR扩增后,可见成骨启动基因核心结合因子α1的表达;对照组未见矿化结节。说明应用Transwell小室可实现成骨样细胞与骨髓基质干细胞体外共培养,并能定向诱导骨髓基质干细胞向成骨细胞分化。关键词：成骨样细胞;Transwell小室;骨髓基质干细胞;共培养;成骨分化;兔 doi:10.3969/j.issn.1673-8225.2012.19.004     

Mesenchymal stem cells enhance wound healing through differentiation and angiogenesis

Although chronic wounds are common, treatment for these disabling conditions remains limited and largely ineffective. In this study, we examined the benefit of bone marrow-derived mesenchymal stem cells (BM-MSCs) in wound healing. Using an excisional wound splinting model, we showed that injection around the wound and application to the wound bed of green fluorescence protein (GFP)(+) allogeneic BM-MSCs significantly enhanced wound healing in normal and diabetic mice compared with that of allogeneic neonatal dermal fibroblasts or vehicle control medium. Fluorescence-activated cell sorting analysis of cells derived from the wound for GFP-expressing BM-MSCs indicated engraftments of 27% at 7 days, 7.6% at 14 days, and 2.5% at 28 days of total BM-MSCs administered. BM-MSC-treated wounds exhibited significantly accelerated wound closure, with increased re-epithelialization, cellularity, and angiogenesis. Notably, BM-MSCs, but not CD34(+) bone marrow cells in the wound, expressed the keratinocyte-specific protein keratin and formed glandular structures, suggesting a direct contribution of BM-MSCs to cutaneous regeneration. Moreover, BM-MSC-conditioned medium promoted endothelial cell tube formation. Real-time polymerase chain reaction and Western blot analysis revealed high levels of vascular endothelial growth factor and angiopoietin-1 in BM-MSCs and significantly greater amounts of the proteins in BM-MSC-treated wounds. Thus, our data suggest that BM-MSCs promote wound healing through differentiation and release of proangiogenic factors. Disclosure of potential conflicts of interest is found at the end of this article.     

Human gingival fibroblast response to electropolished NiTi surfaces

In the present study the in vitro biocompatibility of electropolished NiTi sheets is investigated. The assessment of cytotoxic effects due to potential Ni leaching from metal sheets was performed in direct contact with primary human fibroblast cultures using the 5-bromo-2'-deoxyuridine cell proliferation assay and morphologic studies via light microscopy and scanning electron microscopy. To assess toxic effects related to Ni-ions release, cells cultured in the presence of increasing concentrations of Ni(2+) (NiSO(4).6H(2)O) served as positive controls. It is shown that while the addition of NiSO(4) caused severe proliferation decrease (approximately 80%) and morphologic damage at a concentration of 50 mg/L Ni(2+) no negative effects were observed in fibroblasts cultured in the presence of electropolished NiTi sheets. The results are discussed in terms of surface topography effects on the biocompatibility of NiTi shape memory alloys.     

Cryopreservation of osteoblast-like cells: viability and differentiation with replacement of fetal bovine serum in vitro

In reconstructive medicine, the clinical use of cryopreservation techniques depends on the absence of infectious agents such as prions. Therefore, we investigated the viability and differentiation of human osteoblast-like cells during replacement of fetal bovine serum in vitro. The aim of the present study is to replace the potentially infectious supplement fetal bovine serum during the cryopreservation procedure in order to perform future clinical trials. We used a cryopreservation technique with Me(2)SO for human osteoblast-like cells of iliac cancellous bone. In the cell culture of cryopreserved and fresh osteoblast-like cells, we substituted Dulbecco's modification of Eagle's medium (DMEM)/Ham's F12 plus 1% penicillin/streptomycin with autologous serum, human serum albumin and Biseko for fetal bovine serum. For the fourth treatment group, we removed fetal bovine serum without replacing it. DMEM/Ham's F12 plus 1% penicillin/streptomycin with fetal bovine serum served as the control group. After 4, 7, 14 and 21 days of culture for the cryopreserved and noncryopreserved cells, we performed cell counting, a WST-1 test, ELISA for collagen type I, and osteocalcin. The activity of alkaline phosphatase was also measured. The best results were obtained for the group with autologous serum as a supplement after thawing, exceeding the other groups with regard to proliferation rate. Most viable cells were observed with no replacement before freezing and after thawing of the cells. With regard to differentiation, the cultures with autologous serum after thawing of the cells showed little concentration of the differentiation markers, probably due to early contact inhibition of the cells in vitro. With regard to effort and outcome, the most promising group for cryopreservation was the one with DMEM/Ham's F12 plus 1% penicillin/streptomycin alone before freezing, especially when osteoblast-like cells were cultured in medium with autologous serum after thawing. This is important, as this in vitro setting resembles the in vivo situation when cryopreserved bone is transplanted. These findings indicate that, for clinical purposes, fetal bovine serum can be removed for cryopreservation of iliac cancellous bone with minor loss of viability.     

Shear stress and VEGF enhance endothelial differentiation of human adipose-derived stem cells

Abstract

Herein we combine chemical and mechanical stimulation to investigate the effects of vascular endothelial growth factor (VEGF) and physiological shear stress in promoting the differentiation human adipose derived stem cells (ADSCs) into endothelial cells. ADSCs were isolated and characterized; endothelial differentiation was promoted by culturing confluent cells in 50?ng/ml VEGF under physiological shear stress for up to 14 days. Afterwards, endothelial cells were seeded onto collagen or acellular aortic valve matrices and exposed to four culture conditions: shear stress + VEGF; shear stress ? VEGF; static + VEGF and static ? VEGF. After 7 days, phenotype was investigated. ADSCs subjected to shear stress and VEGF express a comprehensive range of specific endothelial markers (vWF, eNOS and FLT-1 after 7 days and CD31, FLk-1 and VE-cadherin after 14 days) and maintain the phenotype when seeded onto scaffolds. Our protocol proved to be an efficient source of endothelial-like cells for tissue engineering based on autologous ADSC.     

Covalent functionalization of NiTi surfaces with bioactive peptide amphiphile nanofibers

Surface modification enables the creation of bioactive implants using traditional material substrates without altering the mechanical properties of the bulk material. For applications such as bone plates and stents, it is desirable to modify the surface of metal alloy substrates to facilitate cellular attachment, proliferation, and possibly differentiation. In this work we present a general strategy for altering the surface chemistry of nickel-titanium (NiTi) shape memory alloy in order to covalently attach self-assembled peptide amphiphile (PA) nanofibers with bioactive functions. Bioactivity in the systems studied here includes biological adhesion and proliferation of osteoblast and endothelial cell types. The optimized surface treatment creates a uniform TiO(2) layer with low levels of Ni on the NiTi surface, which is subsequently covered with an aminopropylsilane coating using a novel, lower temperature vapor deposition method. This method produces an aminated surface suitable for covalent attachment of PA molecules containing terminal carboxylic acid groups. The functionalized NiTi surfaces have been characterized by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectroscopy (ToF-SIMS), and atomic force microscopy (AFM). These techniques offer evidence that the treated metal surfaces consist primarily of TiO(2) with very little Ni, and also confirm the presence of the aminopropylsilane overlayer. Self-assembled PA nanofibers presenting the biological peptide adhesion sequence Arg-Gly-Asp-Ser are capable of covalently anchoring to the treated substrate, as demonstrated by spectrofluorimetry and AFM techniques. Cell culture and scanning electron microscopy (SEM) demonstrate cellular adhesion, spreading, and proliferation on these functionalized metal surfaces. Furthermore, these experiments demonstrate that covalent attachment is crucial for creating robust PA nanofiber coatings, leading to confluent cell monolayers.     

Effects of adhesion molecules on the behavior of osteoblast-like cells and normal human fibroblasts on different titanium surfaces

This study examined the influences of titanium (Ti) discs with similar surface roughnesses (R(a) values), but with different topographies and chemical compositions, on the adhesion, spreading, and the alkaline phosphatase (ALP) activity of osteoblast-like cells and normal human fibroblasts. The presence of adhesion molecules on the Ti surfaces and their effects on cell activity were also investigated. Two types of Ti discs were prepared. One kind was a mechanically polished Ti disc, and the other type was a disc obtained by the heating of hydroxyapatite (HA) dip-coated Ti. Scanning electron microscopy, optical interferometry, and scanning Auger electron spectroscopy were used to examine the surface morphology, roughness, and chemical composition, respectively, of the superficial Ti layer. The two types of Ti discs had different topographies and chemical compositions, but had similar R(a) values. The cells on both surface types had similar behaviors and ALP activities. A biological evaluation of the surface-modified Ti discs showed that the type I collagen coating was functionally active in terms of cell spreading in both types of Ti discs. In the mechanically polished Ti discs, fibronectin was functionally active in the normal human fibroblasts, but not in the osteoblast-like cells. Cell adhesion was slightly better on the heat-treated HA dip-coated Ti discs, but not on the mechanically polished Ti discs. Type I collagen and fibronectin mediated the adhesion and spreading of osteoblast-like cells through alpha2beta1 integrin and alpha5beta1 integrin, respectively. These results suggest that type I collagen might be a good candidate for the biochemical modification of Ti surfaces, particularly those surfaces obtained by heating of HA dip-coated Ti.     

Engineering surfaces for site-specific vascular differentiation of mouse embryonic stem cells

Differentiation of stem and progenitor cells routinely relies on the application of soluble growth factors, an approach that enables temporal control of cell fate but enables no spatial control of the differentiation process. Angiogenic progenitor cells derived from mouse embryonic stem cells (ESCs) were differentiated here according to the pattern of immobilized vascular endothelial growth factor-A (VEGF). Mouse ESCs engineered to express green fluorescent protein (eGFP) under control of promoter for the receptor tyrosine kinase Flk1 were used. The Flk1+ angiogenic progenitors were selected from day 3 differentiating embryoid bodies based on their expression of eGFP using fluorescence activated cell sorting. Mouse VEGF₁₆₅ was covalently immobilized onto collagen IV (ColIV) using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) chemistry. A non-cell adhesive layer of photocrosslinkable chitosan was first created, after which VEGF–ColIV was stamped as 100 μm wide lanes on top of the chitosan layer and the Flk1+ angiogenic progenitors were seeded for site-specific differentiation. Lanes stamped with only ColIV served as controls. The results presented here demonstrate that the cultivation of Flk1+ progenitors on surfaces with immobilized VEGF yielded primarily endothelial cells (53 ± 13% CD31 positive and 17 ± 2% smooth muscle actin positive), whereas surfaces without VEGF favored vascular smooth muscle-like cell differentiation (26 ± 17% CD31 positive and 38 ± 9% smooth muscle actin positive).     

Osteogenic differentiation of human mesenchymal stem cells on chargeable polymer-modified surfaces

Polystyrene cell-culture plates modified with positively charged polyallylamine (PAAm) and negatively charged poly(acrylic acid) (PAAc) and unmodified plate were used for the culture of human mesenchymal stem cells (MSCs) to study the effect of surface electrostatic properties on their osteogenic differentiation. All of these surfaces supported cell adhesion and proliferation. However, the cells adhered, spread, and proliferated somewhat more quickly on the PAAm-modified surface than they did on the PAAc-modified and control surfaces. Osteogenic differentiation was examined by alkaline phosphatase (ALP) staining, alizarin red S staining, and gene-expression analysis. The MSCs cultured on the three kinds of surfaces in the presence of dexamethasone were positively stained with ALP and alizarin red S staining, while the cells cultured without dexamethasone were not positively stained. Gene-expression analyses using real-time PCR indicated that MSCs cultured on these surfaces in the presence of dexamethasone expressed osteogenic marker genes, encoding ALP, osteocalcin, bone sialoprotein, osteopontin, and type I collagen. These results indicate that the positively charged, negatively charged, and unmodified surfaces supported osteogenic differentiation, and that their effect required the synergistic effect of dexamethasone.     

Chondrogenic differentiation of human mesenchymal stem cells on photoreactive polymer-modified surfaces

Human mesenchymal stem cells (MSCs) were cultured on polystyrene surfaces modified with photoreactive azidophenyl-derivatives of three different chargeable polymers, poly(acrylic acid) (PAAc), polyallylamine (PAAm), and poly(ethylene glycol) (PEG). The MSCs adhered and spread both on a PAAm-modified surface and on PAAc-modified and polystyrene (control) surfaces. However, the cells adhered more easily to the PAAm-modified surface. The MSCs did not attach to the PEG-modified surface and aggregated to form pellets immediately after cell seeding. The cells proliferated on the PAAc-, PAAm-modified and control surfaces with culture time, formed a monolayer, and aggregated to form pellets. The cells in the pellets that formed on the PAAm- and PEG-modified surfaces after 2 weeks culture had a round morphology and the extracellular matrices were positively stained by safranin O and toluidine blue, while those that formed on the PAAc-modified and control surfaces had a spindle, fibroblast-like morphology and were not positively stained by safranin O and toluidine blue. The pellets that formed on the PAAm- and PEG-modified surfaces contained significantly higher levels of sulfated glycosaminoglycans than did those that formed on the PAAc-modified and control surfaces. Type II collagen and cartilage proteoglycan were immunohistologically detected in the pellets that formed on PAAm- and PEG-modified surfaces, but not those that formed on the PAAc-modified and control surfaces. The MSCs cultured on the PAAm- and PEG-modified surfaces expressed a high level of cartilaginous genes encoding type II collagen and aggrecan, while the MSCs cultured on the PAAc-modified and control surfaces did not express these genes. These results suggest that the PAAm-modified surface supported cell adhesion and proliferation and also promoted chondrogenic differentiation of the MSCs. The PAAc-modified and polystyrene surfaces supported cell adhesion and proliferation, but not chondrogenic differentiation. The PEG-modified surfaces did not support cell adhesion, but did promote chondrogenic differentiation. The adhesion, proliferation, and differentiation of the MSCs could be controlled by surface chemistry.     

Osteogenic differentiation of marrow stromal cells cultured on nanoporous alumina surfaces

A major goal in orthopedic biomaterials research is to design implant surfaces, which will enhance osseointegration in vivo. Several microscale as well as nanoscale architectures have been shown to significantly affect the functionality of bone cells i.e., osteoblasts. In this work, nanoporous alumina surfaces fabricated by a two-step anodization process were used. The nanostructure of these surfaces can be controlled by varying the voltage used for anodization process. Marrow stromal cells were isolated from mice and seeded on nanoporous and amorphous (control) alumina surfaces. Cell adhesion, proliferation, and viability were investigated for up to 7 days of culture. Furthermore, the cell functionality was investigated by calcein staining. The cells were provided with differentiation media after 7 days of culture. The alkaline phosphatase (ALP) activity and matrix production were quantified using a colorimetric assay and X-ray photoelectron spectroscopy (XPS) for up to 3 weeks of culture (2 weeks after providing differentiation media). Further, scanning electron microscopy (SEM) was used to investigate osteoblast morphology on these nanoporous surfaces. Over the 3-week study, the nanoporous alumina surfaces demonstrated approximately 45% increase in cell adhesion, proliferation, and viability, 35% increase in ALP activity, and 50% increase in matrix production when compared with the control surfaces.