Electrospun poly(epsilon-caprolactone)/gelatin nanofibrous scaffolds for nerve tissue engineering

Nerve tissue engineering is one of the most promising methods to restore nerve systems in human health care. Scaffold design has pivotal role in nerve tissue engineering. Polymer blending is one of the most effective methods for providing new, desirable biocomposites for tissue-engineering applications. Random and aligned PCL/gelatin biocomposite scaffolds were fabricated by varying the ratios of PCL and gelatin concentrations. Chemical and mechanical properties of PCL/gelatin nanofibrous scaffolds were measured by FTIR, porometry, contact angle and tensile measurements, while the in vitro biodegradability of the different nanofibrous scaffolds were evaluated too. PCL/gelatin 70:30 nanofiber was found to exhibit the most balanced properties to meet all the required specifications for nerve tissue and was used for in vitro culture of nerve stem cells (C17.2 cells). MTS assay and SEM results showed that the biocomposite of PCL/gelatin 70:30 nanofibrous scaffolds enhanced the nerve differentiation and proliferation compared to PCL nanofibrous scaffolds and acted as a positive cue to support neurite outgrowth. It was found that the direction of nerve cell elongation and neurite outgrowth on aligned nanofibrous scaffolds is parallel to the direction of fibers. PCL/gelatin 70:30 nanofibrous scaffolds proved to be a promising biomaterial suitable for nerve regeneration.     

Optimising bioactive glass scaffolds for bone tissue engineering

A 3D scaffold has been developed that has the potential to fulfil the criteria for an ideal scaffold for bone tissue engineering. Sol-gel derived bioactive glasses of the 70S30C (70 mol% SiO2, 30 mol% CaO) composition have been foamed to produce 3D bioactive scaffolds with hierarchical interconnected pore morphologies similar to trabecular bone. The scaffolds consist of a hierarchical pore network with macropores in excess of 500 microm connected by pore windows with diameters in excess of 100 microm, which is thought to be the minimum pore diameter required for tissue ingrowth and vasularisation in the human body. The scaffolds also have textural porosity in the mesopore range (10-20 nm). The scaffolds were sintered at 600, 700, 800 and 1000 degrees C. As sintering temperature was increased to 800 degrees C the compressive strength increased from 0.34 to 2.26 MPa due to a thickening of the pore walls and a reduction in the textural porosity. The compressive strength is in the range of that of trabecular bone (2-12 MPa). Importantly, the modal interconnected pore diameter (98 microm) was still suitable for tissue engineering applications and bioactivity is maintained. Bioactive glass foam scaffolds sintered at 800 degrees C for 2 h fulfill the criteria for an ideal scaffold for tissue engineering applications.     

Nanofibrous poly(epsilon-caprolactone)/poly(vinyl alcohol)/chitosan hybrid scaffolds for bone tissue engineering using mesenchymal stem cells

In the present study, based on a biomimetic approach, novel 3D nanofibrous hybrid scaffolds consisting of poly(epsilon-caprolactone), poly(vinyl alcohol), and chitosan were developed via a multi-jet electrospinning method. The influence of chemical, physical, and structural properties of the scaffolds on the differentiation of mesenchymal stem cells into osteoblasts, and the proliferation of the differentiated cells were investigated. Osteogenically induced cultures revealed that cells were well-attached, penetrated into the construct and were uniformly distributed. The expression of early and late phenotypic markers of osteoblastic differentiation was upregulated in the constructs cultured in osteogenic medium.     

Poly(D,L-lactide/epsilon-caprolactone)/hydroxyapatite composites

In this study, elastomeric D,L-lactide and epsilon-caprolactone copolymers with two different molecular weights (Mn: 108.000 and 40.000) were synthesized by ring-opening polymerization of the respective dimers by using stannous octoate as the catalyst, as a potential bone-filling material. The final ratio of D,L-lactide to epsilon-caprolactone obtained by 1NMR was 60/40 (comparing to the initial ratio of 50/50). Both copolymers were amorphous having Tg at around -21 degrees C. Different amounts of hydroxyapatite (HA) powder were loaded within the copolymers. These composites were easily shaped by hand. Mechanical properties of the composites changed with the HA loading and the molecular weight of the copolymer. The percent elongation decreased, while both the Young's modulus and yield point (stress) increased with the HA content. The copolymers were degraded within the Ringer solutions in about 6 weeks. The molecular weight distribution became broader during degradation. Incorporation of HA reduced the degradation rate.     

Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering

Biodegradable polymer/bioceramic composite scaffolds can overcome the limitations of conventional ceramic bone substitutes such as brittleness and difficulty in shaping. However, conventional methods for fabricating polymer/bioceramic composite scaffolds often use organic solvents (e.g., the solvent casting and particulate leaching (SC/PL) method), which might be harmful to cells or tissues. Furthermore, the polymer solutions may coat the ceramics and hinder their exposure to the scaffold surface, which may decrease the likelihood that the seeded osteogenic cells will make contact with the bioactive ceramics. In this study, a novel method for fabricating a polymer/nano-bioceramic composite scaffold with high exposure of the bioceramics to the scaffold surface was developed for efficient bone tissue engineering. Poly(D,L-lactic-co-glycolic acid)/nano-hydroxyapatite (PLGA/HA) composite scaffolds were fabricated by the gas forming and particulate leaching (GF/PL) method without the use of organic solvents. The GF/PL method exposed HA nanoparticles at the scaffold surface significantly more than the conventional SC/PL method does. The GF/PL scaffolds showed interconnected porous structures without a skin layer and exhibited superior enhanced mechanical properties to those of scaffolds fabricated by the SC/PL method. Both types of scaffolds were seeded with rat calvarial osteoblasts and cultured in vitro or were subcutaneously implanted into athymic mice for eight weeks. The GF/PL scaffolds exhibited significantly higher cell growth, alkaline phosphatase activity, and mineralization compared to the SC/PL scaffolds in vitro. Histological analyses and calcium content quantification of the regenerated tissues five and eight weeks after implantation showed that bone formation was more extensive on the GF/PL scaffolds than on the SC/PL scaffolds. Compared to the SC/PL scaffolds, the enhanced bone formation on the GF/PL scaffolds may have resulted from the higher exposure of HA nanoparticles at the scaffold surface, which allowed for direct contact with the transplanted cells and stimulated the cell proliferation and osteogenic differentiation. These results show that the biodegradable polymer/bioceramic composite scaffolds fabricated by the novel GF/PL method enhance bone regeneration compared with those fabricated by the conventional SC/PL method.     

Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering

Biodegradable polymers and bioactive ceramics are being combined in a variety of composite materials for tissue engineering scaffolds. Materials and fabrication routes for three-dimensional (3D) scaffolds with interconnected high porosities suitable for bone tissue engineering are reviewed. Different polymer and ceramic compositions applied and their impact on biodegradability and bioactivity of the scaffolds are discussed, including in vitro and in vivo assessments. The mechanical properties of today's available porous scaffolds are analyzed in detail, revealing insufficient elastic stiffness and compressive strength compared to human bone. Further challenges in scaffold fabrication for tissue engineering such as biomolecules incorporation, surface functionalization and 3D scaffold characterization are discussed, giving possible solution strategies. Stem cell incorporation into scaffolds as a future trend is addressed shortly, highlighting the immense potential for creating next-generation synthetic/living composite biomaterials that feature high adaptiveness to the biological environment.     

The effect of bioactive glass content on synthesis and bioactivity of composite poly (lactic-co-glycolic acid)/bioactive glass substrate for tissue engineering

Tissue engineering offers a promising new approach to bone tissue grafting. One material that has received attention in this regard is the polymer poly (lactic-co-glycolic acid) (PLGA). It has the advantage of controllable bioresorption and ease of processing. Another material of interest is bioactive glass (BG), which shows the ability to stimulate osteoblastic differentiation of osteoprogenitor cells. In this study, we reported on the optimal synthesis parameters and the kinetics of formation of calcium phosphate (Ca-P) phase at the surface of PLGA/BG composites. The formation of calcium phosphate layer was confirmed using scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDXA). PLGA-30%BG microspheres based porous scaffolds for bone tissue engineering were examined for their ability to promote osteogenesis of marrow stromal cells (MSC). This porous scaffold supported both MSC proliferation and promoted MSC differentiation into cells expressing the osteoblast phenotype. It therefore demonstrates significant potential as a bone replacement material.     

Processing and properties of porous poly(L-lactide)/bioactive glass composites

Porous poly(L-lactide)/bioactive glass (PLLA/BG) composites were prepared by phase separation of polymer solutions containing bioactive glass particles (average particle size: 1.5 microm). The composite microstructures consist of a porous PLLA matrix with glass particles distributed homogeneously throughout. Large pores (>100 microm) are present in a network of smaller (<10 microm) interconnected pores. The porous microstructure of the composites was not significantly influenced by glass content (9 or 29 vol%), but silane pretreatment of the glass resulted in better glass incorporation in the matrix. Mechanical tests showed that an increase in glass content increased the elastic modulus of the composites, but decreased their tensile strength and break strain. Silane pretreatment enhanced the increase in modulus and prevented the decrease in tensile strength with increasing glass content. Composites soaked in simulated body fluid (SBF) at body temperature formed bone-like apatite inside and on their surfaces. The silane pretreatment of glass particles delayed the in vitro apatite formation. This bone-like apatite formation demonstrates the composites' potential for integration with bone.     

Polylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering

Phosphate glass (PG) of the composition 0.46(CaO)-0.04(Na(2)O)-0.5(P(2)O(5)) was used as filler in poly-L-lactic acid (PLA) foams developed as degradable scaffolds for bone tissue engineering. The effect of PG on PLA was assessed both in bulk and porous composite foams. Composites with various PG content (0, 5, 10, and 20 wt %) were melt-extruded, and either compression-molded or foamed through supercritical CO(2). Dynamic mechanical analysis on the bulk composites showed that incorporating 20 wt % PG resulted in a significant increase in storage modulus. Aging studies in deionized water in terms of weight loss, pH change, and ion release inferred that the degradation was due to PG dissolution, and dependent on the amount of glass in the composites. Foaming was only possible for composites containing 5 and 10 wt % PG, as an increase in PG increased the foam densities; however, the level of porosity was maintained above 75%. PLA-T(g) in the foams was higher than those obtained for the bulk. Compressive moduli showed no significant reinforcement with glass incorporation in either expansion direction, indicating no anisotropy. Biocompatibility showed that proliferation of human fetal bone cells was more rapid for PLA compared to PLA-PG foams. However, the proliferation rate of PLA-PG foams were similar to those obtained for foams of PLA with either hydroxyapatite or beta-tricalcium phosphate.     

A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering

A new method to prepare PLA/CMP (poly-L-lactide/calcium metaphosphate) composite scaffolds was developed for effective bone tissue engineering. This novel sintering method is composed of pressing the mixture of PLA, CMP, and salt particles at 150 MPa for 3 min followed by heat treatment at 210 degrees C for 30 min. The scaffolds had a homogeneously interconnected porous structure without a skin layer, and they exhibited a narrower pore size distribution and higher mechanical strength in comparison with scaffolds made by a solvent casting method. The scaffolds were seeded by osteoblasts and cultured in vitro or implanted into nude mice subcutaneously for up to 5 weeks. The number of cells attached to and proliferated on the scaffolds at both in vitro and in vivo was in the order of; PLA by novel sintering < PLA/CMP by solvent casting < PLA/CMP by novel sintering. In addition, the alkaline phosphatase activity of and calcium deposition in the scaffolds explanted from mice were enhanced significantly for the scaffolds by novel sintering compared to them by solvent casting. The in vitro results agreed well with the in vivo data. Such a superior characteristic of the novel sintering method should have resulted from the fact that the CMP particles could contact directly with cells/tissues to stimulate the cell proliferation and osteogenic differentiation, while the CMP particles would be coated by polymers and hindered to interact with cells/tissues in the case of a solvent casting method. As the novel sintering method does not use any solvents it offers another advantage to avoid problems associated with solvent residue.     

Hypoxia-mimicking mesoporous bioactive glass scaffolds with controllable cobalt ion release for bone tissue engineering

Low oxygen pressure (hypoxia) plays an important role in stimulating angiogenesis; there are, however, few studies to prepare hypoxia-mimicking tissue engineering scaffolds. Mesoporous bioactive glass (MBG) has been developed as scaffolds with excellent osteogenic properties for bone regeneration. Ionic cobalt (Co) is established as a chemical inducer of hypoxia-inducible factor (HIF)-1α, which induces hypoxia-like response. The aim of this study was to develop hypoxia-mimicking MBG scaffolds by incorporating ionic Co²⁺ into MBG scaffolds and investigate if the addition of Co²⁺ ions would induce a cellular hypoxic response in such a tissue engineering scaffold system. The composition, microstructure and mesopore properties (specific surface area, nano-pore volume and nano-pore distribution) of Co-containing MBG (Co-MBG) scaffolds were characterized and the cellular effects of Co on the proliferation, differentiation, vascular endothelial growth factor (VEGF) secretion, HIF-1α expression and bone-related gene expression of human bone marrow stromal cells (BMSCs) in MBG scaffolds were systematically investigated. The results showed that low amounts of Co (<5%) incorporated into MBG scaffolds had no significant cytotoxicity and that their incorporation significantly enhanced VEGF protein secretion, HIF-1α expression, and bone-related gene expression in BMSCs, and also that the Co-MBG scaffolds support BMSC attachment and proliferation. The scaffolds maintain a well-ordered mesopore channel structure and high specific surface area and have the capacity to efficiently deliver antibiotics drugs; in fact, the sustained released of ampicillin by Co-MBG scaffolds gives them excellent anti-bacterial properties. Our results indicate that incorporating cobalt ions into MBG scaffolds is a viable option for preparing hypoxia-mimicking tissue engineering scaffolds and significantly enhanced hypoxia function. The hypoxia-mimicking MBG scaffolds have great potential for bone tissue engineering applications by combining enhanced angiogenesis with already existing osteogenic properties.     

Development of biodegradable polyurethane and bioactive glass nanoparticles scaffolds for bone tissue engineering applications

The development of polymer/bioactive glass has been recognized as a strategy to improve the mechanical behavior of bioactive glass-based materials. Several studies have reported systems based on bioactive glass/biopolymer composites. In this study, we developed a composite system based on bioactive glass nanoparticles (BGNP), obtained by a modified St?ber method. We also developed a new chemical route to obtain aqueous dispersive biodegradable polyurethane. The production of polyurethane/BGNP scaffolds intending to combine biocompatibility, mechanical, and physical properties in a material designed for tissue engineering applications. The composites obtained were characterized by structural, biological, and mechanical tests. The films presented 350% of deformation and the foams presented pore structure and mechanical properties adequate to support cell growth and proliferation. The materials presented good cell viability and hydroxyapatite layer formation upon immersion in simulated body fluid.     

Porous poly(alpha-hydroxyacid)/Bioglass composite scaffolds for bone tissue engineering. I: Preparation and in vitro characterisation

Highly porous composites scaffolds of poly-D,L-lactide (PDLLA) and poly(lactide-co-glycolide) (PLGA) containing different amounts (10, 25 and 50 wt%) of bioactive glass (45S5 Bioglass)were prepared by thermally induced solid-liquid phase separation (TIPS) and subsequent solvent sublimation. The addition of increasing amounts of Bioglass into the polymer foams decreased the pore volume. Conversely, the mechanical properties of the polymer materials were improved. The composites were incubated in phosphate buffer saline at 37 degrees C to study the in vitro degradation of the polymer by measurement of water absorption, weight loss as well as changes in the average molecular weight of the polymer and in the pH of the incubation medium as a function of the incubation time. The addition of Bioglass to polymer foams increased the water absorption and weight loss compared to neat polymer foams. However, the polymer molecular weight, determined by size exclusion chromatography, was found to decrease more rapidly and to a larger extent in absence of Bioglass. The presence of the bioactive filler was therefore found to delay the degradation rate of the polymer as compared to the neat polymer foams. Formation of hydroxyapatite on the surface of composites, as an indication of their bioactivity, was recorded by EDXA, X-ray diffractometry and confirmed by Raman spectroscopy.     

Paper-based bioactive scaffolds for stem cell-mediated bone tissue engineering

Bioactive, functional scaffolds are required to improve the regenerative potential of stem cells for tissue reconstruction and functional recovery of damaged tissues. Here, we report a paper-based bioactive scaffold platform for stem cell culture and transplantation for bone reconstruction. The paper scaffolds are surface-engineered by an initiated chemical vapor deposition process for serial coating of a water-repellent and cell-adhesive polymer film, which ensures the long-term stability in cell culture medium and induces efficient cell attachment. The prepared paper scaffolds are compatible with general stem cell culture and manipulation techniques. An optimal paper type is found to provide structural, physical, and mechanical cues to enhance the osteogenic differentiation of human adipose-derived stem cells (hADSCs). A bioactive paper scaffold significantly enhances in vivo bone regeneration of hADSCs in a critical-sized calvarial bone defect. Stacking the paper scaffolds with osteogenically differentiated hADSCs and human endothelial cells resulted in vascularized bone formation in vivo. Our study suggests that paper possesses great potential as a bioactive, functional, and cost-effective scaffold platform for stem cell-mediated bone tissue engineering. To the best of our knowledge, this is the first study reporting the feasibility of a paper material for stem cell application to repair tissue defects.     

Submicron bioactive glass tubes for bone tissue engineering

Herein we describe a method to fabricate submicron bioactive glass tubes using sol-gel and coaxial electrospinning techniques for applications in bone tissue engineering. Heavy mineral oil and gel solution were delivered by two independent syringe pumps during the coaxial electrospinning process. Subsequently, submicron bioactive glass tubes were obtained by removal of poly(vinyl pyrrolidone) and heavy mineral oil via calcination at 600 °C for 5 h. Tubular structure was confirmed by scanning electron microscopy and transmission electron microscopy imaging. We examined the bioactivity of submicron bioactive glass tubes and fibers and evaluated their biocompatibility, using electrospun poly(ε-caprolactone) fibers--a bioinactive material--for comparison. The bioactivity of the glass tubes was examined in a simulated body fluid and they demonstrated the formation of hydroxyapatite-like minerals on both the outer and inner surfaces. In contrast, mineralization only occurred on their surface for bioactive glass solid fibers. Energy-dispersive X-ray data suggested that the bioactive glass tubes had a faster induction of mineral formation than the solid fibers. We demonstrate that the proliferation rate of mouse preosteoblastic MC3T3-E1 cells on bioactive glass tubes was comparable to that on solid fibers. We also show that bioactive glass tubes can be loaded with a model protein drug, bovine serum albumin, and that these structures exhibit delayed release properties. The bioactivity of released lysozyme can be as high as 90.9%. Taken together, these data suggest that submicron bioactive glass tubes could hold great potential for use in bone tissue engineering as well as topical drug or gene delivery.     

Bioactive glass/polymer composite scaffolds mimicking bone tissue

The aim of this work was the preparation and characterization of scaffolds with mechanical and functional properties able to regenerate bone. Porous scaffolds made of chitosan/gelatin (POL) blends containing different amounts of a bioactive glass (CEL2), as inorganic material stimulating biomineralization, were fabricated by freeze-drying. Foams with different compositions (CEL2/POL 0/100; 40/60; 70/30 wt %/wt) were prepared. Samples were crosslinked using genipin (GP) to improve mechanical strength and thermal stability. The scaffolds were characterized in terms of their stability in water, chemical structure, morphology, bioactivity, and mechanical behavior. Moreover, MG63 osteoblast-like cells and periosteal-derived stem cells were used to assess their biocompatibility. CEL2/POL samples showed interconnected pores having an average diameter ranging from 179 ± 5 μm for CEL2/POL 0/100 to 136 ± 5 μm for CEL2/POL 70/30. GP-crosslinking and the increase of CEL2 amount stabilized the composites to water solution (shown by swelling tests). In addition, the SBF soaking experiment showed a good bioactivity of the scaffold with 30 and 70 wt % CEL2. The compressive modulus increased by increasing CEL2 amount up to 2.1 ± 0.1 MPa for CEL2/POL 70/30. Dynamical mechanical analysis has evidenced that composite scaffolds at low frequencies showed an increase of storage and loss modulus with increasing frequency; furthermore, a drop of E' and E″ at 1 Hz was observed, and for higher frequencies both moduli increased again. Cells displayed a good ability to interact with the different tested scaffolds which did not modify cell metabolic activity at the analyzed points. MTT test proved only a slight difference between the two cytotypes analyzed. ? 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A 100A:2654-2667, 2012.     

胶原/生物活性玻璃/壳聚糖增强型复合支架

背景：生物活性玻璃/胶原复合材料具有优良的成骨活性和的生物学性能,然而其在人体环境中易降解而导致支架溃散、力学性能下降。 目的：构建具有良好力学性能、抗降解性能和骨修复特性的胶原/生物活性玻璃/壳聚糖增强型复合支架。 方法：以壳聚糖作为分散剂,将生物活性玻璃粉体预先在壳聚糖溶液中均匀分散,然后与胶原溶液混合,结合冷冻干燥法制备多孔胶原/生物活性玻璃/壳聚糖增强型复合骨修复支架。采用傅里叶变换红外光谱仪、场发射扫描电子显微镜、X射线衍射仪、动态生物力学试验机等对复合支架的结构和性能进行表征。 结果与结论：由于壳聚糖和生物活性玻璃粉体在微酸性环境下的电荷吸引,使在壳聚糖中预分散的生物活性玻璃颗粒在复合支架中分散更均匀;壳聚糖的引入大量增加了机体中的羟基和氨基,使分子间的相互作用增强,显著提高了材料的抗压模量和强度;壳聚糖和胶原在分子尺度的混合,使胶原分子被壳聚糖包裹,降低了胶原酶对胶原分子的酶切能力,显著提高了复合支架的抗胶原酶解性;壳聚糖分子使生物活性玻璃颗粒更均匀的包裹在大分子基相中,减少了生物活性玻璃颗粒的团聚和暴露,导致复合支架在模拟体液中的矿化活性略微降低。中国组织工程研究杂志出版内容重点：生物材料;骨生物材料; 口腔生物材料; 纳米材料; 缓释材料; 材料相容性;组织工程全文链接：     

Calcium phosphate-chitosan composite scaffolds for bone tissue engineering

Macroporous calcium phosphate-chitosan composite scaffolds were fabricated and evaluated for use in bone tissue engineering. Human osteoblast-like MG63 cells were cultured on the composite scaffolds, and their response to the materials was studied. Cell morphology, total protein content, and expression of classic markers for osteoblast differentiation were characterized. MG63 cells on the hydroxyapatite scaffolds nesting chitosan sponges (HC1) showed significantly higher alkaline phosphatase (ALP) level and osteocalcin (OC) production during the 11-day culture period, compared with the control culture on tissue culture plates. Cells on the chitosan scaffolds incorporated with hydroxyapatite powders (HC2) exhibited lower ALP activity during the 11-day culture period and OC secretion during the first 7 days, in comparison with that on HC1. The addition of calcium phosphate glass as in HC3 scaffolds increased the ALP and OC levels of MG63 cells. Our study indicated that the hydroxyapatite-matrix composite scaffolds might enhance the phenotype expression of MG63 cells, in comparison with chitosan-matrix scaffolds. Soluble calcium phosphate glasses should be added to the scaffolds to prevent chitosan from fast degradation that may affect the differentiation of osteoblast cells.     

Biomimetic nanofibrous gelatin/apatite composite scaffolds for bone tissue engineering

Mimicking certain features (e.g. nanoscale topography and biological cues) of natural extracellular matrix (ECM) is advantageous for the successful regeneration of damaged tissue. In this study, nanofibrous gelatin/apatite (NF-gelatin/apatite) composite scaffolds have been fabricated to mimic both the physical architecture and chemical composition of natural bone ECM. A thermally induced phase separation (TIPS) technique was developed to prepare nanofibrous gelatin (NF-gelatin) matrix. The NF-gelatin matrix mimicked natural collagen fibers and had an average fiber diameter of about 150 nm. By integrating the TIPS method with porogen leaching, three-dimensional NF-gelatin scaffolds with well-defined macropores were fabricated. In comparison to Gelfoam^® (a commercial gelatin foam) with similar pore size and porosity, the NF-gelatin scaffolds exhibited a much higher surface area and mechanical strength. The surface area and compressive modulus of NF-gelatin scaffolds were more than 700 times and 10 times higher than that of Gelfoam^®, respectively. The NF-gelatin scaffolds also showed excellent biocompatibility and mechanical stability. To further enhance pre-osteoblast cell differentiation as well as improving mechanical strength, bone-like apatite particles (<2 μm) were incorporated onto the surface of NF-gelatin scaffolds via a simulated body fluid (SBF) incubation process. The NF-gelatin/apatite scaffolds 5 days after SBF treatment showed significantly higher mechanical strength than NF-gelatin scaffolds 5 days after SBF treatment. Furthermore, the incorporated apatite in the NF-gelatin/apatite composite scaffold enhanced the osteogenic differentiation. The expression of BSP and OCN in the osteoblast–(NF-gelatin/apatite composite) constructs was about 5 times and 2 times higher than in the osteoblast–(NF-gelatin) constructs 4 weeks after cell culture. The biomimetic NF-gelatin/apatite scaffolds are, therefore, excellent for bone tissue engineering.     

Poly(D,L-lactide/epsilon-caprolactone)/hydroxyapatite composites as bone filler: an in vivo study in rats

In this study, a novel composite bone substitute was implanted in animal models (rats) and their in vivo characteristics were examined. A D,L-lactide and E-caprolactone copolymer (Mw: 80,000; Mn:40,000, and PI:2.00) was synthesized by ring-opening polymerization of the respective dimers using stannous octoate as the catalyst. The final ratio of D,L-lactide to epsilon-caprolactone obtained by 1NMR was 60/40. Hydroxyapatite (HA) powder was loaded in the copolymer. The HA/copolymer ratio was 60/40 (w/w). These composites were easily shaped by hand. Animal tests were performed on mature wistar rats (n=30). Defects were created on the proximal, the thickest part of the femur. The bone defects of the first group were filled with polymer/HA composite, the second group filled with only HA and the third group was left empty. Histologic examination of bone tissues showed new bone formation around the yellow-green polymer/HA composite material in the first group of animals whereas no evidence of new bone growth was observed in other groups.