Proposed MIC quality control guidelines for National Committee for Clinical Laboratory Standards susceptibility tests using seven veterinary antimicrobial agents: ceftiofur, enrofloxacin, florfenicol, penicillin G-novobiocin, pirlimycin, premafloxacin, and spectinomycin.

The present multicenter study proposes broth microdilution quality control (QC) ranges for the antimicrobial agents ceftiofur, enrofloxacin, florfenicol, penicillin G-novobiocin, pirlimycin, premafloxacin, and spectinomycin, which are used in veterinary practice. Six separate laboratories tested replicates of National Committee for Clinical Laboratory Standards (NCCLS)-recommended QC organisms (Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 29213, and Enterococcus faecalis ATCC 29212) on medium lots both common and unique to all laboratories. The proposed ranges were within 3 or 4 log2 dilution steps of the modal MICs for all organism-antimicrobial agent pairs, depending on their MIC distributions. With > or = 94.7% of all MIC results being within the proposed QC ranges, all combinations tested comply with NCCLS guidelines and all have been accepted by the NCCLS subcommittee developing susceptibility testing procedures for veterinary laboratories.     

Quality control guidelines for disk diffusion and broth microdilution antimicrobial susceptibility tests with seven drugs for veterinary applications

This multicenter study proposes antimicrobial susceptibility (MIC and disk diffusion methods) quality control (QC) parameters for seven compounds utilized in veterinary health. Alexomycin, apramycin, tiamulin, tilmicosin, and tylosin were tested by broth microdilution against various National Committee for Clinical Laboratory Standards (NCCLS)-recommended QC organisms (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 29212, Streptococcus pneumoniae ATCC 49619, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853). In addition, disk diffusion zone diameter QC limits were determined for apramycin, enrofloxacin, and premafloxacin by using E. coli ATCC 25922, P. aeruginosa ATCC 27853, and S. aureus ATCC 25923. The results from five or six participating laboratories produced >/=99.0% of MICs and >/=95.0% of the zone diameters within suggested guidelines. The NCCLS Subcommittee for Veterinary Antimicrobial Susceptibility Testing has recently approved these ranges for publication in the next M31 document.     

Quality control guidelines for cefdinir, cefepime, cefetamet, cefmetazole, cefpodoxime, cefprozil, and clinafloxacin (CI-960) for various National Committee for Clinical Laboratory Standards susceptibility testing methods. Quality Control Study Group.

Several multilaboratory studies to determine quality control (QC) ranges for a variety of National Committee for Clinical Laboratory Standards (NCCLS) susceptibility tests are summarized. Replicate testing used multiple lots of media and antimicrobial disks in accordance with NCCLS recommendations, including the appropriate medium modifications for tests with Haemophilus spp. and Neisseria gonorrhoeae. QC ranges for MIC and disk diffusion testing of N. gonorrhoeae ATCC 49226 were proposed for cefepime, cefetamet, cefmetazole, and cefpodoxime. Disk diffusion QC ranges for Haemophilus influenzae ATCC 49247 or ATCC 49766 were recommended with cefepime, cefetamet (10- and 30-microgram disks), cefmetazole, cefpodoxime, and cefprozil. Disk diffusion QC ranges for Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 with cefdinir and clinafloxacin and those for Pseudomonas aeruginosa ATCC 27853 with clinafloxacin were also proposed.     

Preliminary evaluation of a semisolid agar antifungal susceptibility test for yeasts and molds

This report presents a semisolid agar antifungal susceptibility (SAAS) method for the rapid susceptibility screening of yeasts and molds. The reproducibility and accuracy of the SAAS method were assessed by comparing the MICs of amphotericin B and fluconazole obtained for 10 candidate quality control (QC) American Type Culture Collection yeast strains in >/=15 replicates with those found by six independent laboratories using the National Committee for Clinical Laboratory Standards (NCCLS) M27-P broth macrodilution method (M. A. Pfaller et al., J. Clin. Microbiol. 33:1104-1107, 1995). Overall, 96% of MICs for both drugs fell within 1 log(2) dilution of the modal MIC for each strain. The MICs for amphotericin B showed 99% agreement with the NCCLS proposed QC ranges within 1 log(2) dilution. Likewise, the MICs for fluconazole at >/=75% growth reduction showed 99% agreement for seven strains. Three strains, Candida albicans ATCC 24333 and ATCC 76615 and Candida tropicalis ATCC 750, showed a less sharp fluconazole endpoint at >/=75% growth reduction, but at >50% growth reduction, the agreement was 98% within 1 log(2) dilution of the proposed range. The MIC agreement within the proposed range for the suggested QC strains Candida parapsilosis ATCC 22019 and Candida krusei ATCC 6258 was 100% for fluconazole and 100% within 1 log(2) dilution of the proposed range for amphotericin B. The SAAS method demonstrated the susceptibility or resistance of 25 clinical isolates of filamentous fungi such as Aspergillus fumigatus to amphotericin B, itraconazole, and fluconazole, usually within 48 h. Although the results are preliminary, this SAAS method is promising as a rapid and cost-effective screen and is worthy of concerted investigation.     

Quality control guidelines for National Committee for Clinical Laboratory Standards--recommended broth macrodilution testing of ketoconazole and itraconazole.

Ketoconazole and itraconazole were tested in a multilaboratory study to establish quality control (QC) guidelines for yeast antifungal susceptibility testing. Two isolates that had been previously identified as QC isolates for amphotericin B, fluconazole, and flucytosine (Candida parapsilosis ATCC 22019 and Candida krusei ATCC 6258) were tested in accordance with the National Committee for Clinical Laboratory Standards M27-P guidelines. Each isolate was tested 20 times with the two antifungal agents in the five laboratories by using a lot of RPMI 1640 unique to each laboratory as well as a lot common to all five laboratories, thus generating 200 MICs per drug per organism. Overall, 96 to 99% of the MICs for each drug fell within the desired 3-log2 dilution range (mode +/- 1 log2 dilution). By using these data, 3-log2 dilution QC ranges encompassing 98% of the observed MICs for three of the organism-drug combinations and 94% of the observed MICs for the fourth combination were established. These QC ranges are 0.064 to 0.25 micrograms/ml for both ketoconazole and itraconazole against C. parapsilosis ATCC 22019 and 0.125 to 0.5 micrograms/ml for both ketoconazole and itraconazole against C. krusei ATCC 6258.     

Quality control guidelines for testing gram-negative control strains with polymyxin B and colistin (polymyxin E) by standardized methods

An eight-laboratory study addressed the urgent need for quality control (QC) ranges for susceptibility determination when testing colistin (polymyxin E) and polymyxin B, two polycationic peptide antimicrobial agents, against multidrug-resistant gram-negative bacilli. For Escherichia coli ATCC 25922l, the QC ranges were as follows: for colistin, 0.25 to 1 microg/ml (11 to 17 mm), and for polymyxin B, 0.25 to 2 microg/ml (13 to 19 mm). For Pseudomonas aeruginosa ATCC 27853, the QC ranges were as follows: for colistin, 0.25 to 2 microg/ml (11 to 17 mm), and for polymyxin B, 0.25 to 2 mug/ml (14 to 18 mm). More than 97% of all reported QC results were within these proposed ranges.     

Revision of linezolid disk diffusion quality control guidelines for testing Staphylococcus aureus ATCC 25923: an independent seven-laboratory trial

The accuracy of the published disk diffusion quality control (QC) range for linezolid for Staphylococcus aureus ATCC 25923 has been reported to be problematic, prompting a multicenter study to determine if revision was necessary. Five out of seven laboratories reported values outside the current QC range. Three participants had significant (13.3–60.0%) 'unacceptable' results with zones smaller than the established range. Overall, a range of 21–32 mm was shown (82.4% within the NCCLS published range). A revision (25–31 mm; 95.7% of results) of the QC range is necessary when testing S. aureus ATCC 25923 against linezolid.     

MIC quality control guidelines for Haemophilus susceptibility tests using cefdinir (FK482), cefepime, cefetamet, cefpirome, ceftibuten, fleroxacin, temafloxacin, clarithromycin, RP59500, and trospectomycin.

A multilaboratory study was performed to establish broth microdilution MIC quality control (QC) guidelines for 10 investigational drugs which previously demonstrated significant activity against Haemophilus influenzae. MIC QC ranges for H. influenzae ATCC 49247 with Haemophilus test medium were determined by using multiple contemporary lots of Haemophilus test medium and the National Committee for Clinical Laboratory Standards' recommended numbers of replicate tests. On the basis of these results, QC ranges (generally modal MIC +/- one log2 dilution) are proposed for cefdinir, cefepime, cefetamet, cefpirome, ceftibuten, fleroxacin, temafloxacin, clarithromycin, RP59500, and trospectomycin. The proposed QC guidelines for clarithromycin and temafloxacin were recently accepted by the National Committee for Clinical Laboratory Standards.     

Disk Diffusion and MIC Quality Control Ranges for BC-3205 and BC-3781, Two Novel Pleuromutilin Antibiotics

MIC and disk diffusion quality control (QC) ranges were established for two new pleuromutilin antimicrobials (BC-3205 and BC-3781) in an eight-laboratory study performed according to Clinical and Laboratory Standards Institute M23-A3 guidelines. Staphylococcus aureus ATCC 29213 and 25923, Streptococcus pneumoniae ATCC 49619, and Haemophilus influenzae ATCC 4927 strains were evaluated. The proposed QC ranges would aid clinical laboratories in testing these compounds following their development for treatment of respiratory and cutaneous infections.     

Standardization of Broth Microdilution and Disk Diffusion Susceptibility Tests for Actinobacillus pleuropneumoniae and Haemophilus somnus: Quality Control Standards for Ceftiofur, Enrofloxacin, Florfenicol, Gentamicin, Penicillin, Tetracycline, Tilmicosin, and Trimethoprim-Sulfamethoxazole

Quality control (QC) standards for the in vitro antimicrobial susceptibility testing of two fastidious veterinary pathogens, Actinobacillus pleuropneumoniae and Haemophilus somnus, were developed in a multilaboratory study according to procedures established by the National Committee for Clinical Laboratory Standards for broth microdilution and disk diffusion testing. The medium recommended for the broth microdilution testing is cation-adjusted Mueller-Hinton broth supplemented with 2% lysed horse blood, 2% yeast extract, and 2% supplement C. This medium has been designated veterinary fastidious medium. The medium recommended for the disk diffusion testing is chocolate Mueller-Hinton agar. The recommended QC organisms are A. pleuropneumoniae ATCC 27090 and H. somnus ATCC 700025. The QC MICs of ceftiofur, enrofloxacin, florfenicol, gentamicin, penicillin, tetracycline, tilmicosin, and trimethoprim-sulfamethoxazole were determined for each isolate, as were the zone size ranges. Of the results from the participating laboratories, 94.0% of the zone diameter results and 97.0% of the MIC results fell within the suggested QC ranges for all compounds. These QC guidelines should allow greater accuracy in interpreting results when testing these antimicrobial agents against fastidious pathogens.     

Quality control guidelines for National Committee for Clinical Laboratory Standards recommended broth macrodilution testing of amphotericin B, fluconazole, and flucytosine.

Amphotericin B, fluconazole, and flucytosine (5FC) were tested in a multilaboratory study to establish quality control (QC) guidelines for yeast antifungal susceptibility testing. Ten candidate QC strains were tested in accordance with National Committee for Clinical Laboratory Standards M27-P guidelines against the three antifungal agents in each of six laboratories. Each laboratory was assigned a unique lot of RPMI 1640 broth medium as well as a lot of RPMI 1640 common to all of the laboratories. The candidate QC strains were tested 20 times each against the three antifungal agents in both unique and common lots of RPMI 1640. A minimum of 220 MICs per drug per organism were generated during the study. Overall, 95% of the MICs of amphotericin B, fluconazole, and 5FC fell within the desired 3 log2-dilution range (mode +/- 1 log2 dilution). Excellent performance with all three drugs was observed for Candida parapsilosis ATCC 22019 and C. krusei ATCC 6258. With these strains, on-scale 3 log2-dilution ranges encompassing 96 to 99% of the MICs of all three drugs were established. These two strains are recommended for QC testing of amphotericin B, fluconazole, and 5FC. Reference ranges were also established for an additional four strains for use in method development and for training. Four strains failed to perform adequately for recommendation as either QC or reference strains.     

Proposed quality control guidelines for antimicrobial susceptibility tests using tilmicosin.

Quality control guidelines for tilmicosin, a novel veterinary-use-only macrolide, were developed in a multi-laboratory study according to established National Committee for Clinical Laboratory Standards (NCCLS) procedures (M23-T2). Tilmicosin was incorporated into Sensititre plates for broth microdilution endpoint testing and into two lots of 15-micrograms disks for Kirby-Bauer agar disk diffusion testing. One common lot and five unique lots of Mueller-Hinton media were used. (Broth was cation adjusted, and agar was supplemented with 5% defibrinated sheep blood.) Bacteria used for reference strains included Pasteurella haemolytica 128K, Pasteurella multocida ATCC 43137, and Staphylococcus aureus ATCC 29213 (microdilution) and ATCC 25923 (disk). Replicate tests were conducted. Disk diffusion and broth microdilution quality control ranges are proposed.     

Selection of candidate quality control isolates and tentative quality control ranges for in vitro susceptibility testing of yeast isolates by National Committee for Clinical Laboratory Standards proposed standard methods.

The National Committee for Clinical Laboratory Standards has developed a proposed standard method for in vitro antifungal susceptibility testing of yeast isolates (National Committee for Clinical Laboratory Standards, document M27-P, 1992). In order for antifungal testing by the M27-P method to be accepted, reliable quality control (QC) performance criteria must be developed. In the present study, five laboratories tested 10 candidate QC strains 20 times each against three antifungal agents: amphotericin B, fluconazole, and 5-fluorocytosine. All sites conformed to the M27-P standards and used a common lot of tube dilution reagents and RPMI 1640 broth medium. Overall, 98% of MIC results with amphotericin B, 95% with fluconazole, and 92% with 5-fluorocytosine fell within the desired 3-log2 dilution range (mode +/- 1 log2 dilution). Excellent performance with all three antifungal agents was observed for six strains: Candida albicans ATCC 90028, Candida parapsilosis ATCC 90018, C. parapsilosis ATCC 22019, Candida krusei ATCC 6258, Candida tropicalis ATCC 750, and Saccharomyces cerevisiae ATCC 9763. With these strains, 3-log2 dilution ranges encompassing 94 to 100% of MICs for all three drugs were established. Additional studies with multiple lots of RPMI 1640 test medium will be required to establish definitive QC ranges.     

Quality control guidelines for amphotericin B, Itraconazole, posaconazole, and voriconazole disk diffusion susceptibility tests with nonsupplemented Mueller-Hinton Agar (CLSI M51-A document) for nondermatophyte Filamentous Fungi

Although Clinical and Laboratory Standards Institute (CLSI) disk diffusion assay standard conditions are available for susceptibility testing of filamentous fungi (molds) to antifungal agents, quality control (QC) disk diffusion zone diameter ranges have not been established. This multicenter study documented the reproducibility of tests for one isolate each of five molds (Paecilomyces variotii ATCC MYA-3630, Aspergillus fumigatus ATCC MYA-3626, A. flavus ATCC MYA-3631, A. terreus ATCC MYA-3633, and Fusarium verticillioides [moniliforme] ATCC MYA-3629) and Candida krusei ATCC 6258 by the CLSI disk diffusion method (M51-A document). The zone diameter ranges for selected QC isolates were as follows: P. variotii ATCC MYA-3630, amphotericin B (15 to 24 mm), itraconazole (20 to 31 mm), and posaconazole (33 to 43 mm); A. fumigatus ATCC MYA-3626, amphotericin B (18 to 25 mm), itraconazole (11 to 21 mm), posaconazole (28 to 35 mm), and voriconazole (25 to 33 mm); and C. krusei, amphotericin B (18 to 27 mm), itraconazole (18 to 26 mm), posaconazole (28 to 38 mm), and voriconazole (29 to 39 mm). Due to low testing reproducibility, zone diameter ranges were not proposed for the other three molds.     

Disk diffusion test interpretive criteria and quality control recommendations for testing linezolid (U-100766) and eperezolid (U-100592) with commercially prepared reagents.

Two new oxazolidinones were tested to determine interpretive susceptibility testing criteria for MIC and disk diffusion methods. Commercial lots of linezolid (formerly U-100766) and eperezolid (formerly U-100592) disks containing 30 microg of drug were tested against 728 isolates of bacteria with defined mechanisms of resistance. Results from linezolid were highlighted because of its choice for clinical development. By using preliminary pharmacokinetic data, a tentative susceptibility breakpoint of < or = 4 microg/ml was selected. Corresponding breakpoint zone diameters for linezolid were > or = 21 mm (< or = 4 microg/ml) for susceptibility and < or = 17 mm (> or = 16 microg/ml) for resistance. Regression statistics demonstrated a high correlation coefficient (r > or = 0.98), and absolute categorical agreement between methods was obtained, when staphylococci and enterococci were tested with the cited criteria. When Streptococcus spp. (including S. pneumoniae) were tested, only the susceptibility breakpoint was suggested. Quality control (QC) guidelines for linezolid disk diffusion tests were established by a multilaboratory trial as follows: 27 to 31 mm for Staphylococcus aureus ATCC 25923 and 28 to 34 mm for S. pneumoniae ATCC 49619. More than 95% of all QC results were within these proposed ranges. Although not advanced to clinical trials, eperezolid demonstrated potency comparable to that of linezolid and had identical interpretive testing criteria. These preliminary interpretive criteria and QC limits (accepted by the National Committee for Clinical Laboratory Standards) should be applied to linezolid tests during the clinical-trial phases of oxazolidinone drug development in order to ensure test accuracy and reproducibility.     

Quality control guidelines for BAL9141 (Ro 63-9141), an investigational cephalosporin, when reference MIC and standardized disk diffusion susceptibility test methods are used

BAL9141 is a novel cephalosporin with a broad spectrum of activity, including activity against methicillin-resistant staphylococci. This multicenter study was performed to establish quality control (QC) guidelines for susceptibility testing of BAL9141 in phase 3 clinical trials and after U.S. Food and Drug Administration approval. The proposed 3 or 4 log(2) dilution MIC ranges encompass 97.8 to 100.0% of reported results, while the proposed 7- to 9-mm-zone-diameter QC ranges included 95.2 to 99.4% of the participant-reported disk diffusion results.     

Multisite reproducibility of the Etest MIC method for antifungal susceptibility testing of yeast isolates.

A multicenter study was performed to establish the interlaboratory reproducibility of Etest, to provide an additional comparison of Etest MICs with reference broth macrodilution MICs, and to develop some tentative quality control (QC) guidelines for using Etest for antifungal susceptibility testing of Candida spp. Two QC strains, Candida parapsilosis ATCC 22019 and Candida krusei ATCC 6258, were tested by Etest against amphotericin B, fluconazole, flucytosine, itraconazole, and ketoconazole in each of four laboratories. The QC strains were tested 20 times each against the five antifungal agents by using a common lot of RPMI agar. A total of 80 MICs per drug per strain were generated during the study. Overall, 98 to 100% of the MICs fell within a 3 log2 dilution range for the respective yeast-antifungal agent combinations. The level of agreement of Etest MICs with broth macrodilution MICs was 86 to 100% with amphotericin B (C. krusei and C. parapsilosis), itraconazole (C. krusei and C. parapsilosis), flucytosine (C. parapsilosis), and fluconazole (C. parapsilosis). A lower level of agreement was observed with ketoconazole (C. krusei and C. parapsilosis). Although all participants reported identical Etest MICs, the MICs of flucytosine and fluconazole when tested against C. krusei fell well above the upper limits of the reference range for this strain. The tentative QC limits for the two QC strains and five antifungal agents when tested by the Etest methodology are the same as the QC limits when tested by the reference broth macrodilution method for amphotericin B and C. krusei, itraconazole and C. krusei, flucytosine and C. parapsilosis, fluconazole and C. parapsilosis, and itraconazole and C. parapsilosis. The Etest QC ranges are 1 dilution broader (4-dilution range) than the reference macrodilution method QC ranges for ketoconazole and C. krusei, amphotericin B and C. parapsilosis, and ketoconazole and C. parapsilosis.     

Contemporary assessment of antimicrobial susceptibility testing methods for polymyxin B and colistin: review of available interpretative criteria and quality control guidelines

The emergence of infections caused by multidrug-resistant Pseudomonas aeruginosa and Acinetobacter spp. has necessitated the search for alternative parenteral agents such as the polymyxins. The National Committee for Clinical Laboratory Standards (NCCLS) documents do not currently provide interpretative criteria for the testing of the polymyxins, colistin and polymyxin B. Therefore, an evaluation of the antimicrobial activity of colistin and polymyxin B was initiated using 200 bloodstream infection pathogens collected through the SENTRY Antimicrobial Surveillance Program. All susceptibility tests were performed according to the NCCLS recommendations. Polymyxin B and colistin displayed a nearly identical spectrum of activity, exhibiting excellent potency against P. aeruginosa (MIC(90), 2 microg/ml) and Acinetobacter sp. (MIC(90), 2 microg/ml). In contrast, they showed limited activity against some other nonfermentative bacilli such as Burkholderia cepacia (MIC(90), >/=128 microg/ml). Excellent correlation was achieved between broth microdilution and agar dilution tests (r = 0.96 to 0.98); 94.3% of the results were +/-1 log(2) dilution between the methods used for both compounds. At a resistance breakpoint of >/=4 microg/ml for both agents, unacceptable false-susceptible or very major errors were noted for colistin (5%) and polymyxin B (6%). Modified zone criteria for colistin (/=14 mm) and polymyxin B (/=14 mm) were suggested, but some degree of error persisted (>/=3.5%). It is recommended that all susceptible disk diffusion results be confirmed by MIC tests using the preferred reference NCCLS method. The quality control (QC) ranges listed in the product package insert require an adjusted range by approximately 3 mm for both NCCLS gram-negative quality control strains. This evaluation of in vitro susceptibility test methods for the polymyxin class drugs confirmed continued serious testing error with the disk diffusion method, the possible need for breakpoint adjustments, and the recalculation of disk diffusion QC ranges. Clinical laboratories should exclusively use MIC methods to assist the therapeutic application of colistin or polymyxin B until disk diffusion test modifications are sanctioned and published by the NCCLS.     

Development of interpretive criteria and quality control limits for macrolide and clindamycin susceptibility testing of Streptococcus pneumoniae.

A six-laboratory collaborative study was conducted to develop MIC and zone diameter quality control limits and interpretive criteria for antimicrobial susceptibility testing of Streptococcus pneumoniae with azithromycin, clarithromycin, dirithromycin, and clindamycin. The MICs of all of the agents plus erythromycin for 302 clinical isolates of pneumococci that had been selected with an emphasis on resistant strains were determined by use of the National Committee for Clinical Laboratory Standards (NCCLS)-recommended broth microdilution procedure. The zone diameters of the isolates were also determined for the same agents except erythromycin by the NCCLS disk diffusion test procedure. Repeated testing of S. pneumoniae ATCC 49619 with different sources and lots of media and disks allowed development of MIC and zone diameter quality control ranges for these agents. Interpretive criteria for the MIC of azithromycin were established and were as follows: susceptible, < or = 0.5 microgram/ml; intermediate, 1 microgram/ml; and resistant, > or = 2 micrograms/ml. The interpretive criteria advocated for the MICs of clarithromycin and clindamycin were as follows: susceptible, < or = 0.25 microgram/ml; intermediate, 0.5 microgram/ml; and resistant, > or = 1 microgram/ml. Comparison of MICs and disk diffusion zone diameters led to the development of interpretive criteria for the zone diameters for azithromycin, clarithromycin, and clindamycin that correlated well with these MIC breakpoints. Testing of this organism collection also led to the reestablishment of the erythromycin MIC breakpoints as being identical to those of clarithromycin, which resulted in equivalent cross-susceptibility and cross-resistance for the three macrolides that are currently marketed in the United States. Thus, the susceptibility of pneumococci to azithromycin and clarithromycin can be predicted accurately by testing only erythromycin in clinical laboratories. This recommendation, as well as the interpretive and quality control criteria that are described, have been accepted by NCCLS and are included in the latest NCCLS susceptibility testing guidelines.