Effect of unreamed, limited reamed, and standard reamed intramedullary nailing on cortical bone porosity and new bone formation

OBJECTIVE: To compare the effects of unreamed nail insertion and reamed nail insertion with limited and standard canal reaming on cortical bone porosity and new bone formation. DESIGN: A canine segmental tibial fracture was created in fifteen adult dogs. The tibiae were stabilized with a statically locked 6.5-millimeter intramedullary nail without prior canal reaming (n = 5), after limited reaming to 7.0 millimeters (n = 5), or after standard canal reaming to 9.0 millimeters (n = 5). Porosity, new bone formation, and the mineral apposition rate of cortical bone were directly compared between the three nailing techniques. RESULTS: A significant increase in cortical bone porosity and new bone formation was seen in all three groups of experimental animals compared with the control tibiae. The overall lowest porosity levels were measured in the limited reamed group, with similar porosity levels measured in the unreamed and standard reamed groups. Porosity was lower in the limited reamed group in the entire cortex of the segmental and distal cross sections, as well as the endosteal, anterior, and posterior cortices along the length of the tibia. Overall, there was no difference in the amount of new bone formation or the mineral apposition rate between the three groups of animals at eleven weeks after surgery. DISCUSSION: The results of this study suggest that limited intramedullary reaming is a biologically sound alternative for the treatment of tibial diaphyseal fractures in which the circulation is already compromised.     

Intramedullary nailing of the lower extremity: biomechanics and biology

The intramedullary nail or rod is commonly used for long-bone fracture fixation and has become the standard treatment of most long-bone diaphyseal and selected metaphyseal fractures. To best understand use of the intramedullary nail, a general knowledge of nail biomechanics and biology is helpful. These implants are introduced into the bone remote to the fracture site and share compressive, bending, and torsional loads with the surrounding osseous structures. Intramedullary nails function as internal splints that allow for secondary fracture healing. Like other metallic fracture fixation implants, a nail is subject to fatigue and can eventually break if bone healing does not occur. Intrinsic characteristics that affect nail biomechanics include its material properties, cross-sectional shape, anterior bow, and diameter. Extrinsic factors, such as reaming of the medullary canal, fracture stability (comminution), and the use and location of locking bolts also affect fixation biomechanics. Although reaming and the insertion of intramedullary nails can have early deleterious effects on endosteal and cortical blood flow, canal reaming appears to have several positive effects on the fracture site, such as increasing extraosseous circulation, which is important for bone healing.     

Periosteal microvascular reorganization after tibial reaming and intramedullary nailing in rats

BackgroundIntramedullary reaming and nailing of long bones impairs the endosteal circulation, often causing necrosis of the inner region of the bone cortex. We hypothesized that compensatory hypertrophy of the periosteal microcirculation may develop in response to mechanical destruction of the endosteum, and that this may affect bone survival in these circumstances. In these studies, nailing was performed with materials that affect regeneration of the endosteum differently, and the effects on the tibial periosteal microvasculatory organization were examined.MethodsIn male Wistar rats, the right tibia was reamed and implanted with an inert titanium nail or a less osseointegrative polyethylene nail; the contralateral tibial endosteum was destroyed by reaming. Reaming without nailing or sham operation was performed on both extremities in two other groups of rats. Twelve weeks later, the anteromedial and anterolateral surfaces of the tibias were exposed by a microsurgical technique. The structural characteristics of the periosteal microcirculation (vessel density and distribution of vessel diameters) were determined by intravital videomicroscopy and computer-assisted analysis. The stability of the implants was assessed on the basis of grades 0–2 on a qualitative scale.ResultsTibial reaming alone caused significant increases in overall blood vessel and capillary densities in the periosteum compared with those of the intact tibias. Implantation with a titanium nail resulted in firm embedding of the nail and caused changes in the periosteal vasculature similar to those after reaming alone. In contrast, implantation of a polyethylene nail was followed by the development of marked instability of the endomedullary implant and significant increases in the percentage of capillaries and the vessel density in the periosteum.ConclusionsDestruction of the endosteal microcirculation per se brings about an increase in periosteal vascular density, which is further augmented if implantation is performed with a material which delays regeneration of the endosteal circulation.     

The influence of a one-step reamer-irrigator-aspirator technique on the intramedullary pressure in the pig femur

BACKGROUND: Increased intramedullary pressure in the femoral cavity causes intravasation of bone marrow content to the circulation which may lead to occlusion of pulmonary vessels and cardiorespiratory dysfunction. A one-step reamer-irrigator-aspirator (RIA) technique has been developed to reduce the intramedullary pressure (IMP) during the reaming procedure. This study was design to compare IMP with a standard reaming technique with IMP during reaming with the RIA system with a hypothesis that the RIA system would involve lower pressures. MATERIAL AND METHOD: In a randomised study in 19 Norwegian landrace pigs reamed intramedullary nailing was performed with two different reamer devices. Nine animals were operated with a traditional reamer and 10 animals with RIA. One animal in the RIA group was excluded due to a perioperative femoral fracture, and three animals in the traditional group were excluded due to a perforation of the distal medial femoral cortex. The intramedullary pressure was registrated with a transducer-tipped pressure monitoring catheter during reaming. RESULTS: There was a significantly higher intramedullary pressure (P<0.05) during reaming in the traditional reamer group (mean 188+/-38 mmHg) than in the RIA group (mean 33+/-8 mmHg). Intramedullary pressures recorded before surgery, at the opening of the femoral cavity with an awl, by insertion of a guide wire, at insertion of the intramedullary nail, and 10 min after nail insertion showed no significant differences between the groups. CONCLUSION: The use of a one-step reamer-irrigator-aspirator technique in the pig femur induced less intramedullary pressure increase than the use of a traditional reamer.     

Intramedullary reaming and nailing: its early effects on cortical bone vascularization

The early effect of reaming the medullary cavity prior to intramedullary nailing using Küntscher's method, on human cortical bone vascularization in the femur is discussed. In sections of the femur where the medullary tissue had been totally reamed, the inner two-thirds of the cortical bone tube was completely avascularized one week after the reaming. In the outer third of the cortex the vascularization was only moderately decreased. In the parts of the femur where the medullary tissue was not totally destroyed there was a marginal effect on the amount of intact cortical vessels. The observation is thus in accordance with corresponding results from experimental studies on animals. Microcracks, and cracks in the cortical wall, caused by the reaming and procedure are also described in the article.     

Experimental reaming of the proximal femur and acrylic cement implantation: vascular and histologic effects.

The technique of microangiography and correlated histology was used, in experiments on the proximal femora of mature mongrel dogs, to study the effects of simple medullary reaming and of reaming followed by insertion of acrylic cement. The hip joints were not disturbed. A segment of Steinmann pin, representing the stem of a hip prosthesis, was inserted into the cement as it was polymerizing. The most significant results, after reaming alone, were devascularization and apparent necrosis of large areas of the cortex of the subtrochanteric femoral diaphysis. Full recovery was observed in 6 months. However, when acrylic cement was introduced following the reaming, extensive necrosis of the inner layers of the diaphyseal cortex was still present after a year, when the observations were terminated. The presence of necrosis of bone was judged by the lack of visible osteocytes in the lacunae. After the devascularization caused by filling the diaphyseal medulla with acrylic cement, the apparently necrotic cortex was revitalized without osteoclasia. That is in contrast to the results in another study in which osteoclasia and osteoneogenesis were required to restore cortex with empty cell lacunae. This raises the question of dormant osteonecrosis in contrast to total osteonecrosis. These studies show, in thin histologic preparations, acrylic bone cement in situ in the tissues. A fibrous membrane was found at the cement-bone interface in most areas. It was thicker in the diaphysis than in the metaphysis. The physiologic effects of acrylic cement implantation are considered to be likely factors in the loosening which is observed clinically when the femoral components of hip prostheses are under protracted stress.     

Growth factor release following femoral nailing

The aim of this study was to investigate whether growth factors essential for fracture healing are substantially increased in the immediate aftermath following reaming of the intramedullary cavity for stabilisation of femoral shaft fractures. Consecutive adult patients whose femoral shaft fractures stabilised with either reamed (10 patients) or unreamed (10 patients) intramedullary nailing were studied. Peripheral blood samples and samples from the femoral canal before and after reaming and nail insertion were collected. Serum was extracted and using Elisa colorimetric assays the concentration of Platelet Derived Growth Factor-BetaBeta (PDGF), Vascular Endothelial Growth Factor (VEGF), Insulin-like Growth Factor-I (IGF-I), Transforming Growth Factor beta 1 (TGF-beta1) and Bone Morphogenetic Protein-2 (BMP-2) was measured. The mean age of the twenty patients who participated in the study was 38 years (range 20-63). Reaming substantially increased all studied growth factors (p<0.05) locally in the femoral canal. VEGF and PDGF were increased after reaming by 111.2% and 115.6% respectively. IGF-I was increased by 31.5% and TGF-beta1 was increased by 54.2%. In the unreamed group the levels of PDGF-BB, VEGF, TGF-beta1 remained unchanged while the levels of IGF-I decreased by 10%. The levels of these mediators in the peripheral circulation were not altered irrespectively of the nail insertion technique used. BMP-2 levels during all time points were below the detection limit of the immunoassay. This study indicates that reaming of the intramedullary cavity is associated with increased liberation of growth factors. The osteogenic effect of reaming could be secondary not only to grafting debris but also to the increased liberation of these molecules.     

Osteosynthesis of metastatic lesions of the proximal femur with a solid femoral nail and interlocking spiral blade inserted without reaming

OBJECTIVES: To evaluate the efficiency of a solid femoral nail and interlocking spiral-blade, inserted without reaming (UFN/ spiral blade, Synthes-Stratec, Oberdorf, Switzerland), for the fixation of pathologic and impending pathologic fractures of the proximal femur, particularly those involving the subtrochanteric area. DESIGN: Retrospective, consecutive series. SETTING AND PATIENTS: All patients treated for pathologic and impending pathologic fractures of the trochanteric or subtrochanteric area, stabilized using a UFN/spiral blade, inserted without reaming, from June 1994 to June 1997. INTERVENTION: Femoral intramedullary nailing was performed without reaming on a radiolucent operating room table. The nail was inserted through a five-centimeter supratrochanteric approach, and the interlocking spiral-blade device was introduced percutaneously. METHODS: The following parameters were assessed: pathology reports, location of bone lesions, patient survival, pain relief, ambulation, hardware failure on successive radiographs, and intraoperative complications. RESULTS: Twelve pathologic and impending pathologic fractures were stabilized in ten patients. Two patients required bilateral nailing that was staged with intervals of two and three weeks, respectively. The average postsurgical survival was six and one-half months. No implant failure was noted, and no surgical revision was performed. One intraoperative death occurred during surgery and was documented on autopsy as massive pulmonary fat embolization. Neither patient with bilateral nailing suffered from fat embolism syndrome. CONCLUSIONS: Femoral nail insertion without reaming using an interlocking spiral blade provides appropriate stabilization of the proximal femur in case of metastatic lesions, even with extensive subtrochanteric involvement. Although the nails were inserted without reaming, this did not avoid the risk of fat embolization syndrome. This study only addressed results in patients with short-term survival.     

Tibial shaft malunion treated with reamed intramedullary nailing: a revised technique

Thirty-seven consecutive adult tibial shaft malunions which had not undergone surgical treatment were prospectively treated with reamed intramedullary nailing. Indications for this treatment modality included a malunion of a tibial shaft which had only been conservatively treated, lesion level fitting for traditional or locked reamed intramedullary nail fixation, less than 2 cm shortening, and without evidence of deep infection at present. The malunions were treated with fibulotomy, closed wedge tibial osteotomy, open reaming of the marrow cavity, stable reamed intramedullary nail stabilization with or without supplementation, and cancellous bone grafting. Thirty-four (92%) patients were followed up for at least 1 year (range 1.0–4.3 years), and all achieved a solid union. The union period was 5.8±0.8 months. Complications included 2 (6%) patients with deep infection and 1 (3%) with cortical perforation. However, all 3 patients recovered completely after adequate management. In conclusion, a reamed intramedullary nail is an ideal instrument for tibial shaft malunions in indicated cases. Good exposure of the bony segments to ream the marrow cavity precisely can avoid cortical perforation. Gentle dissection of the soft tissues may lower the infection rate. Concomitant cancellous bone grafting can improve the union rate. Received: 13 April 1999     

Temperature rise during reamed tibial nailing

The current study determined the temperature rise during reamed tibial intramedullary nailing in vivo. Eighteen adult patients were studied. The tibial medullary canal diameter ranged from 8 to 11 mm and was reamed to at least 1.5 mm above the required nail diameter with AO reamers. Reaming of the medullary cavity ranged from 9 to 12 mm before nail insertion. Intraoperative monitoring of the heat produced during reaming of the medullary cavity was done by inserting two platinum resistance thermometer probes into the cortical bone at the short isthmic segment of the tibial shaft. The probes were connected to a data logger, and temperature readings were taken every 5 seconds during each reaming procedure. The mean tibial temperature before initiation of reaming was 35.6 degrees C (standard deviation, +/- 0.5 degrees), and peak temperatures recorded were from 36.1 degrees C to 51.6 degrees C. A direct correlation was observed between temperature elevation and amount of reaming. With reaming above 10 mm, tibias with a canal diameter of 8 mm showed a statistically higher temperature rise compared with tibias with a canal diameter of 9, 10, or 11 mm. No patients had intraoperative or postoperative complications related to skin or bone thermal necrosis, and bony healing progressed uneventfully. The small amount of reaming required to insert a nail into a normal 9-, 10-, or 11- mm tibial canal does not seem to produce a clinical problem. Reaming smaller canals (8 mm) to a larger size may induce a significant heating effect.     

A prospective, randomized study of intramedullary nails inserted with and without reaming for the treatment of open and closed fractures of the tibial shaft

OBJECTIVES: To determine if there are differences in healing, complications, or number of procedures required to obtain union among open and closed tibia fractures treated with intramedullary (IM) nails inserted with and without reaming. DESIGN: Prospective, surgeon-randomized comparative study. SETTING: Level One trauma center. PATIENTS: Ninety-four consecutive patients with unstable closed and open (excluding Gustilo Grade IIIB and IIIC) fractures of the tibial shaft treated with IM nail insertion between November 1, 1994, and June 30, 1997. INTERVENTION: Interlocked IM nail insertion with and without medullary canal reaming. MAIN OUTCOME MEASURES: Time to union, type and incidence of complications, and number of secondary procedures performed to obtain union. RESULTS: For open fractures, there were no significant differences in the time to union or number of additional procedures performed to obtain union in patients with reamed nail insertion compared with those without reamed insertion. A higher percentage of closed fractures were healed at four months after reamed nail insertion compared with unreamed insertion (p = 0.040), but there was not a difference at six and twelve months. More secondary procedures were needed to obtain union after unreamed nail insertion for the treatment of closed tibia fractures, but the difference was not statistically significant given the limited power of our study (p = 0.155). Broken screws were seen only in patients treated with smaller-diameter nails inserted without reaming, and the majority occurred in patients who were noncompliant with weight-bearing restrictions. There were no differences in rates of infection or compartment syndrome. CONCLUSION: Our findings support the use of reamed insertion of IM nails for the treatment of closed tibia fractures, which led to earlier time to union without increased complications. In addition, canal reaming did not increase the risk of complications in open tibia fractures.     

Contaminated fractures of the tibia: A comparison of treatment modalities in an animal model

External fixation is the current standard treatment for skeletal stabilization of open tibial fractures, but intramedullary fixation techniques have become increasingly popular. The aim of this study was to compare, in an animal model, the susceptibility to infection of contaminated fractures stabilized with external fixation with that of contaminated fractures fixed with intramedullary locking nails with or without reaming. A unilateral osteotomy of the tibia was performed in 15 goats under general anesthesia. Each osteotomy was stabilized with either (a) a unilateral biplanar external fixator, (b) an 8 mm diameter intramedullary rod inserted without reaming of the medullary cavity, or (c) a 10 mm diameter rod inserted after reaming. A standardized inoculum of Staphylococcus aureus, 10³ colony forming units per milliliter, was placed at each osteotomy site on a piece of absorbable gelatin sponge, to simulate contamination of an open fracture. Antibiotics were not administered. The animals were allowed full activity after the procedure. Fourteen days postoperatively, the animals were killed, radiographs of the tibiae were taken, and the tibiae were harvested in a sterile manner. Multiple specimens for quantitative microbiological analysis were taken from the fracture site and from sites 3 cm distal and 6 cm proximal to the fracture. Additional specimens of bone were taken for histological study. Clinical, radiographic, and microbiological analysis demonstrated that, in this animal model, there were significantly fewer and less severe infections in fractures fixed with external fixation than in those fixed with an intramedullary nail with or without reaming. There was marked cortical necrosis in tibiae that had been fixed with nailing and reaming.     

Comparison of the effect of reamed and unreamed locked intramedullary nailing on blood flow in the callus and strength of union following fracture of the sheep tibia

This study was performed to compare the effects of reamed and unreamed locked intramedullary nailing on blood flow in the callus and early strength of union in a fractured sheep tibia model. After the creation of a standardized short spiral fracture by three-point bending with torsion, each tibia was stabilized by the insertion of a locked intramedullary nail. Ten animals were allocated randomly into two groups: one that had reaming prior to nail insertion and one that did not. Blood flow was measured in real time with use of laser Doppler flowmetry. Endosteal perfusion was determined at the fracture site before and after nail insertion. Perfusion of the callus was measured at three locations (proximal diaphysis, fracture site, and distal diaphysis) and at three time intervals (2, 6, and 12 week follow-up). All animals were killed 12 weeks postoperatively, and the tibiae were tested to failure in four-point bending. Nailing with reaming resulted in a larger decrease in overall endosteal perfusion than nailing without reaming (p < 0.015). The presence or absence of reaming did not affect blood flow within fracture callus. Perfusion of callus was greatest at 6 weeks of follow-up. Bending strength and stiffness were the same in both groups at 12 weeks. The study demonstrated that perfusion of callus and early strength of union are similar following intramedullary nailing with or without reaming.     

Vascular and structural changes in rat femora following nailing and intramedullary occlusion

The purpose of this study was to evaluate biomechanical, structural, and blood flow changes of the femoral canal in rats 12 weeks after intramedullary reaming, nailing, or occlusion. In one group, reaming alone was performed. In a second group, reaming was followed by use of a tight-fit steel nail. In a third group, reaming was followed by use of inert silicone that totally plugged the medullary cavity. A fourth group served as the control. The acute mechanical and vascular effects caused by reaming and nailing were determined in a separate group. Reaming and nail insertion reduced blood flow in femoral bone to about one-third. Reaming reduced bending moment by approximately 40%, whereas bending rigidity was unchanged. After 12 weeks, the cortical bone blood flow was significantly increased in both the nailed and the silicone-plugged bones compared with the reamed and control groups. The bending moment and energy absorption in the silicone group were inferior to those of the other groups. There were no differences in either the external or internal diameter or the medullary and net bone areas. In the silicone group, both the number and the area of large pores (larger than 10 μm) significantly increased in comparison with the other groups; hence, bone porosity was increased. This increment was confined to large pores. It is concluded that medullary occlusion contributes to structural and blood flow changes in bone.     

Attempted unreamed nailing in tibial fractures: A prospective consecutive series of 55 patients

We evaluated the possibility of unreamed insertion of an intramedullary nail (IMN) in a consecutive series of 55 tibial shaft fractures in 55 patients (30 men). 43 fractures were closed and 12 fractures were open. All surgeons involved were instructed to try unreamed insertion primarily. Selection of nail diameter was based on measurements of the narrowest part of the medullary canal on preoperative AP- and lateral radiographs, with a millimeter-ruler. Of the 25 cases where a 9 mm nail was chosen, 10 were impossible to insert without reaming. An 8 mm nail was selected in the remaining 30 cases, and here 10 required reaming. Mean time-to-union was 4.2 months. Delayed union was noted in 9 patients of whom 6 had been stabilized with an unreamed nail. The concept of unreamed insertion must be questioned since this could be done in only 35 patients and, in addition, we were not able to demonstrate any significant differences in time-to-union in fractures stabilized with an unreamed or a reamed nail. Implant failures were seen in 5 patients, all stabilized with an 8 mm nail. Failure of interlocking screws did not affect the final outcome. However, a possible combination of screw breakage and healing disturbances may lead to the need for more complex surgical procedures. Due to these reasons and the fact that the 8 mm nail could not be inserted unreamed in 10 of 30 patients, we stopped using the 8 mm nail.     

Different healing patterns of experimental osteotomies treated by intramedullary nailing

Summary The healing of 52 diaphyseal osteotomies in rabbit tibiae was followed up histologically from 3 to 24 weeks after rigid intramedullary nailing. The histological evaluation was made from longitudinal sections through the osteotomy area. Particular attention was paid to the fracture healing pattern. A bulky periosteal response was visible in every specimen. At 24 weeks, the external callus was always well remodeled. The osteotomy line rapidly filled with bone from 6 weeks onwards. At 24 weeks, the site of osteotomy was detectable only on the basis of slight irregularity in the cortex. The secondary gap healing seen in 19 specimens was the most common type of bone union from 6 weeks onwards. In 13 specimens, the exact type of osteonal healing was not definable, since a solid union with good cortical reconstruction was always the final outcome. Altogether, four nonunions were detected throughout the study, none of these, however, in the specimens at 24 weeks. Considerable endosteal resorption was detected at 24 weeks, at which time at least one third of the original cortex had dissappeared in all specimens. The rigid nail seems to ensure a relatively uneventful healing of the experimental osteotomies. Vast endosteal resorption and some nonunions make the use of medullary reaming in this connection doubtful.     

Effects of graded reaming on fracture healing: Blood flow and healing studied in rat femurs

In 30 rats, closed bilateral fractures of the femur were produced. On the left side intramedullary reaming was performed to 1.6 mm, and the fracture fixed with a steel pin with a diameter of 1.6 mm. On the right side the femoral canal was reamed to 2.0 mm and a hollow steel tube with a diameter of 2.0 mm was used for fixation. An additional 8 rats were used to obtain mechanical, dimensional and flow data on intact femurs, and another 10 rats were used to study the acute flow changes caused by fracture and different degrees of reaming and fracture.

Fracture and reaming reduced total bone and cortical bone blood flows to about one third of normal flow, with no differences between the 1.6-mm and the 2.0-mm reamed bones. At 4 weeks, total bone flow was about double and cortical bone flow about 4 times increased in the 1.6-mm group. In the 2.0-mm reamed bones increases of approximately 5 times in total bone flow and of about 7 times in cortical flow were found. Callus flow was about twice the size of the respective cortical flow in both groups. Both total and cortical flows gradually subsided, without differences between the 2 groups. At 12 weeks, the callus area in the 2.0-mm group was greater than in the 1.6-mm group, while bone dimensions were greater in the 2.0-mm group at 4 and 12 weeks. Bending moment and rigidity were greater in the 1.6-mm group than in the 2.0-mm one at every time interval; no differences were found in fracture energy.

We conclude that, in terms of healing, modest reaming is preferable to extensive reaming. The adverse effect of extensive reaming is not due to excessive flow derangement at the acute stage or to impaired vascularity at the phase of remodeling.     

Unreamed or RIA reamed nailing: an experimental sheep study using comparative histological assessment of affected bone tissue in an acute fracture model

The purpose of the present study was to evaluate the Reamer/Irrigator/Aspirator (RIA), a reaming system designed to incorporate the advantages of irrigation and suction for every day clinical use. The evaluation process was focused on the displacement of the medullary content and its impact on cortical perfusion. The results of the RIA reamed nailing were compared to conventional non-reamed nailing (NRN). The tibia of the sheep was used as an acute fracture model. The fracture and nailing procedure was followed by intravital staining with Procion red. The effects on cortical perfusion (Procion red staining) were addressed in polymer embedded sections and cryosections. Sudan III stained cryosections were evaluated with respect to the cortical fat distribution. After irrigation and suction minute amounts of fat were observed in the cortex, whereas after non-reamed nailing the endosteal third of the cortical bone was penetrated with fat. Non-reamed nailing acutely showed better perfusion in the endosteal tenth and periosteal third of the cortical bone, after irrigation and suction reaming perfusion was preserved to a lesser degree. Irrigation and suction significantly reduces fat intravasation, and thus the danger of system-wide damage. Therefore, the Reamer/Irrigator/Aspirator is as efficient as its experimental predecessors.     

Marknagelung nach Aufbohrung

The stabilization of long bone fractures through reaming the medullary cavity and insertion of an intramedullary nail, with or without locking bolts, was a standard procedure in fracture treatment for a long time. With the development of nails, which can be applied without reaming, the procedure lost importance. This publication presents the mechanical principles and impact of reaming on the bone. It describes how the pressure of the drill head and drill wave leads to a compression of medullary contents into the cortical vascular system. With the development of new drilling devices the direct effects of pressurization can be minimized and then become similar to those of unreamed intramedullary nailing. Lowering the pressure during reaming also prevents the formation of mixed thrombosis on the base of a nucleus of the bone marrow in the venous circulatory system and the danger of a pulmonary embolism. The majority of experimental research shows slightly faster fracture healing after reamed nailing. In the few randomized clinical studies presented, exclusively coming from Canada, accelerated fracture healing has also been confirmed. Aside from this it was also shown that there were fewer cases of non-unions and implant failures and less need for secondary surgeries when reamed nailing was used. Despite the difficulty in rating the clinical trials presented, due to the high number of participating clinics, the impression remains that in the course of fracture healing intramedullary reamed nailing has some advantages in comparison to unreamed nailing. An obvious advantage is that earlier and sometimes immediate weight-bearing can be tolerated. Today nevertheless unreamed nailing is favoured especially in German-speaking countries. This is maybe due to the necessary classic procedure of planning, positioning on the fracture table and reaming in steps, which make the operation slightly more complex, requiring a certain amount of armamentarium and technical understanding. In any case reamed intramedullary nailing offers an alternative procedure for many indications; to treat a hypertrophic non-union of the shaft of the long bones it remains the method of first choice.     

Changes in Femoral Cortical Porosity After Reaming and Intramedullary Canal Preparation in a Canine Model

This study examined changes in femoral cortical porosity resulting from femoral canal preparation during cemented total hip arthroplasty (THA). Twenty-four canines were randomly assigned to 3 groups: (1) reaming only, (2) cementing without pressurization, and (3) cementing with pressurization. Femoral cortical porosity was measured from histologic samples of the femurs at 7 positions. Reaming during canal preparation significantly increased cortical porosity. Cementing further increased cortical porosity, whereas pressurization of cement helped to counteract the increase in cortical porosity caused by cementing alone. Cortical porosity was considered to be a marker for bone mineral density (BMD) during the early phase of peri-implant healing around cemented stems. To maximize bone mineral density after cemented total hip arthroplasty, we suggest using implants that do not require reaming and pressurizing cement appropriately.