Light-cured combination obturator prosthesis.

A technique for the fabrication of an open combination (hard-resilient) obturator prosthesis with VLC materials for patients undergoing partially edentulous maxillectomy is described. VLC denture resins and resilient liners are an exciting innovation in prosthodontic treatment and offer the maxillofacial prosthodontist a wider choice of treatment modalities. The technique and the resultant obturator prosthesis have the following advantages: 1. The ease and rapidity of the technique saves time for both the patient and the maxillofacial prosthodontist by introducing the open obturator prosthesis at the earliest opportunity. 2. The combination open obturator prosthesis provides a stable record base for securing jaw relation records. 3. The thickness and resiliency of the obturator prosthesis can be managed more easily. Flexibility and resiliency can be modified by the thickness of the resilient liner or by adding a rigid scaffolding according to the clinical requirements. 4. Prostheses are easy to repair or modify by using increments of VLC hard or resilient materials. 5. The combination VLC obturator prosthesis provides stability, retention, and decreased weight and obduration of residual palatal defects. 6. The technique can be used for partially edentulous or edentulous patients after maxillary resection.     

Fabricating a Hollow Obturator with Light-Cured Resin System

Tumor resection of a cancer lesion produces maxillary defects that can be easily restored with an obturator to close the defect area. Postsurgical maxillary defects predispose a patient to hypernasal speech, fluid leakage into the nasal cavity, and impaired masticatory function. Therefore, the primary aims of prosthetic rehabilitation in total and partial maxillectomy patients include: separation of oral and nasal cavities to allow adequate deglutition and articulation, possible support of orbital contents and support of soft tissue to restore mid-facial contours. A method of fabricating a simple hollow obturator for maxillectomy patients is described. The use of a relatively long-lasting light cure resin materials in making obturators allows stable, comfortable, and effective obturation. The hollow prosthesis is lightweight and sufficiently flexible to allow relatively simple placement in retentive undercut regions.     

Obturator prostheses for hemimaxillectomy patients

Maxillary defects are created by surgical treatment of benign or malignant neoplasms, congenital malformation and by trauma. The size and location of the defects influence the degree of impairment and difficulty in prosthetic rehabilitation. Lack of support, retention, and stability are common prosthodontic treatment problems for patients who have had a maxillectomy. A prosthesis used to close a palatal defect in a dentate or edentulous mouth is referred to as an obturator. The obturator prosthesis is used to restore masticatory function and improve speech, deglutition and cosmetics for maxillary defect patients.     

Fabrication of a hollow obturator as a single unit for management of bilateral subtotal maxillectomy

Prosthetic rehabilitation with an obturator for a total or subtotal maxillectomy patient is a challenging task, as there are little or no residual maxillary structures to depend on for support, retention, and stability of the prosthesis. This clinical report describes the prosthodontic management of a patient operated on for a bilateral subtotal maxillectomy secondary to ameloblastoma of the palate with a closed hollow obturator. The processing technique described in this article to fabricate the hollow obturator is a variation of other well-known techniques. The variation comprises the use of a wax bolus to maintain a predictable internal dimension for a hollow obturator. This technique allows fabrication of a complete hollow obturator prosthesis as a single unit in heat-polymerized acrylic resin using a single-step flasking procedure.     

A custom made extraoral aid for retaining interim obturator in edentulous patients with bilateral maxillectomy: A report of four patients

It is a considerable challenge for a prosthodontist to rehabilitate and sustain the prosthesis in edentulous patients with bilateral maxillectomy. Compelling evidence is lacking with respect to the treatment outcome when the maxillary defects are closed surgically in comparison to their prosthetic rehabilitation. Four edentulous male patients, with bilateral maxillectomy defects were referred for prosthodontic intervention to meet their nutritional and speech issues. In the absence of intra oral supporting and retentive structures, it was decided to retain the obturator utilizing extraoral aid to address their functional needs. Customized headgear face‐bow retained obturators were adequately retentive and did serve its purpose well in all four patients. It also gave the liberty to alter retention and refine the prosthesis at will, provided access to the operated site for a quick evaluation of disease recurrence, and was economical to the patients. Considering the encouraging outcome experienced in this special category of individuals, it would be reasonable to believe that the headgear face‐bow assembly has an immense potential to function as a valuable, prudent, and a viable retentive aid for a non‐implant retained obturator in edentulous patients with extensive maxillary defect.     

Use of Orbital Conformer to Improve Speech in Patients with Confluent Maxillectomy and Orbital Defects

The basic objective in prosthetic restoration of confluent maxillary and orbital defects is to achieve a comfortable, cosmetically acceptable prosthesis that restores speech, deglutition, and mastication. It is a challenging task complicated by the size and shape of the defects. The maxillary obturator prosthesis often satisfies the objective of adequate deglutition; however, orbital defects that are not obturated in the medial, septal, or posterior walls allow air to escape, negatively impacting phonation. This article describes a technique to achieve favorable prosthetic rehabilitation in a patient with a maxillectomy and ipsilateral orbital exenteration. The prosthetic components include maxillary obturator, orbital conformer, and orbital prosthesis connected using rigid magnetic attachments.     

Evaluation of the quality of life of patients with maxillofacial defects after prosthodontic therapy with obturator prostheses

The purpose of this study was to investigate how patients with maxillofacial defects evaluate their quality of life after maxillectomy and prosthodontic therapy with obturator prostheses. 43 patients were included in the study (25 female, 18 male). 31 (72%) patients completed a standardized questionnaire of 143 items and then answered additional questions in a standardized interview. Global quality of life after prosthodontic therapy with obturator prostheses was 64% (±22.9) on average. Functioning of the obturator prosthesis, impairment of ingestion, speech and appearance, the extent of therapy, and the existance of pain had significant impact on the quality of life (p < 0.005). Orofacial rehabilitation of patients with maxillofacial defects using obturator protheses is an appropriate treatment modality. To improve the situation of patients prior to and after maxillectomy sufficient information about the treatment, adequate psychological care and speech therapy should be provided.     

Anatomical and functional rehabilitation after total bilateral maxillectomy using a custom-made bone-anchored titanium prosthesis

Surgical reconstruction after a total maxillectomy remains challenging. The standard treatment is the microvascular free flap. In cases of surgical contraindication, oral rehabilitation is usually performed with a palatal obturator prosthesis (PAP). Acceptable anatomical and functional outcomes in terms of speech, mastication, aesthetic appearance, stability, and comfort are not often achieved with a PAP. This technical note describes a technique for reconstruction after total bilateral maxillectomy involving the implantation of a custom-made bone-anchored titanium prosthesis obtained by 3D printing. Good functional and anatomical outcomes were achieved with this technique. It combines the advantages of the obturator prosthesis (short duration of surgery and hospitalization, low morbidity) and free flap (aesthetic/anatomical reconstruction and irremovable comfortable functional rehabilitation). This technique constitutes a new therapeutic alternative for the restoration of large defects after total maxillectomy when free flaps are contraindicated.     

Evaluation of swallowing ability using swallowing sounds in maxillectomy patients

Maxillectomy for oral tumours often results in debilitating oral hypofunction, which markedly decreases quality of life. Dysphagia, in particular, is one of the most serious problems following maxillectomy. This study used swallowing sounds as a simple evaluation method to evaluate swallowing ability in maxillectomy patients with and without their obturator prosthesis placed. Twenty‐seven maxillectomy patients (15 men, 12 women; mean age 66.0 ± 12.1 years) and 30 healthy controls (14 men, 16 women; mean age 44.9 ± 21.3 years) were recruited for this study. Participants were asked to swallow 4 mL of water, and swallowing sounds were recorded using a throat microphone. Duration of the acoustic signal and duration of peak intensity (DPI) were measured. Duration of peak intensity was significantly longer in maxillectomy patients without their obturator than with it (P < .05) and was significantly longer in maxillectomy patients without their obturator than in healthy controls (P < .025 after Bonferroni correction). With the obturator placed, DPI was significantly longer in maxillectomy patients who had undergone soft palate resection than in those who had not (P < .05). These results suggest swallowing ability in maxillectomy patients could be improved by wearing an obturator prosthesis, particularly during the oral stage. However, it is difficult to improve the oral stage of swallowing in patients who have undergone soft palate resection even with obturator placement.     

Fabricating a Hollow Obturator with Visible Light‐Cured Resin System

Obturators are routinely used in the rehabilitation of maxillectomy defects. Ideally, obturators should be easily constructed to produce a comfortable and stable prosthesis. This article describes a technique that provides an easy method for the construction of an obturator prosthesis using a visible light‐cured (VLC) resin. As a result, technicians can easily construct obturators in little time; this would, in turn, provide patients with light, comfortable, and tolerable prostheses.     

Rehabilitation of a bilateral maxillectomy patient with a free fibula osteocutaneous flap

Rehabilitation of patients who have undergone bilateral maxillectomy is difficult because of extensive loss of bone and soft tissue. In this clinical report, prosthodontic rehabilitation of oral function in a bilateral maxillecitomy patient combined with a new fibular osteocutaneous flap, which was designed to have two oronasal slits for the retention of an obturator prosthesis, was described. A 58-year-old man with a maxillary alveolar carcinoma underwent bilateral maxillectomy. The defect was reconstructed using a vascularized fibular bone wrapped circumferentially with a peroneal flap, which was fixed with miniplates between the right malar prominence and cut edge of the left zygoma remaining two slits anterior and posterior to the graft. Two and half weeks after the surgery, a delayed surgical obturator was delivered and an obturator prosthesis was delivered 6 weeks after the surgery. This obturator prosthesis could be extended into the slits to engage the tissue undercuts, and was stable during use. Mastication, deglutition, articulation and the mid-facial profile of the patient were rehabilitated. After installation of the obturator prosthesis, relining of the prosthesis base was carried out alongside the healing process of the graft, and adjustment of occlusions and high-pressure spots was carried out. No clinical disorders were observed either in the grafted tissue or the obturator prosthesis with a 3-year prognosis. Newly designing a fibular osteocutaneous flap combined with tissue-borne obturator prosthesis is one successful approach to the restoration of oral function, and increases the patient's quality of life after bilateral maxillectomy.     

Surgical and prosthetic reconsiderations in patients with maxillectomy

Summary The purpose of this study was to establish and evaluate new possibilities for rehabilitation of patients with obturator prosthesis who had undergone partial or total maxillectomy because of tumour ablation surgery. Eleven patients with maxillary defects were reconstructed with a computer‐aided design/computer‐aided manufacturing designed prosthesis. Missing retention was gained by inserting implants in the remaining bone, so that an expansion of the surgical defect to gain further retention could be avoided. All patients were treated successfully according to the previously described treatment plan. The Obturator Functioning Scale (OFS) of the Memorial Sloan‐Kettering Cancer Centre was applied to evaluate the functional quality of the obturator prosthesis and patient’s satisfaction. It showed good results in all fields of functional outcome and social acceptance.     

分体式阻塞器修复双侧上颌骨缺失1例报告

通过为一例双侧上颌骨缺失患者制作分体式阻塞器及硅橡胶赝复体,探讨修复双侧上颌骨缺失的一种新方法。     

上颌中空式赝复体的改良制作

目的:降低赝复体的制作难度,提高赝复体的临床疗效.方法:选择单侧上颌骨缺损的患者11名,应用改良式赝复体修复缺损,评价疗效.结果:11名患者均对外观的恢复效果表示满意;口鼻腔通道封闭严密.制作技师认为降低技工室的制作难度.有利于临床医师制取理想颌位记录.结论:采用改良方式制作赝复体可较容易地获得一完整的中空式赝复体,降低了赝复体的制作难度.是一种对临床医师和技师均具有实用意义的修复体制作技术.     

Maxillary obturator prosthesis rehabilitation following maxillectomy for ameloblastoma: case series of five patients

PURPOSE: The purpose of this case report is to demonstrate the benefits and applicability of appropriate maxillofacial prosthetic rehabilitation following surgical resection of ameloblastoma of the maxilla in Kenya. MATERIALS AND METHODS: Five patients presenting with ameloblastoma of the maxilla over 3 years were studied with respect to histologic type, site of tumor, resultant surgical defect, and form of definitive obturator prosthesis. Impressions were taken using irreversible hydrocolloid and poured with dental stone. Immediate surgical obturators were fabricated from casts using clear autopolymerizing acrylic resin. One patient had bilateral partial maxillectomy, whereas the rest had unilateral partial maxillectomy. Immediate surgical obturators were fitted intraoperatively and held in place using Adams clasps on the remaining natural dentition for all patients, except the one who had undergone bilateral partial maxillectomy, whose surgical obturator was held loosely using circumzygomatic wires. After 6 to 8 weeks, surgical obturators and packing were withdrawn, and new impressions were taken to fabricate definitive obturators. Patients were reviewed every 2 weeks for 3 months, then once every 3 months per year for 3 years, and thereafter once per year. RESULTS: The immediate surgical obturators facilitated retention of the surgical packing, promoting healing with minimal postsurgical infection and scar contracture formation. This ensured the restoration of acceptable esthetics and maintenance of oral function at a reasonable level during the initial postoperative period. Definitive obturators restored esthetics, oral function, and ability to handle secretions to a satisfactory level. CONCLUSION: Satisfactory functional and esthetic results are achievable in patients with extensive acquired maxillary defects by means of obturator prostheses fabricated using readily available materials.     

Treatment Outcome with Delayed Maxillary Obturator Prosthesis: Case Series of Four Patients

A series of four patients is presented to indicate the possibility of success with delayed prosthodontic rehabilitation of acquired maxillary defects. Four patients with a history of hemi‐maxillectomy in the past 3 to 5 years were rehabilitated with definitive obturator prostheses. All had partial maxillectomy on the right side. Because of delayed referral to the prosthodontic facility, immediate surgical and interim obturation was not planned. Definitive obturator prostheses were fabricated following the necessary steps and delivered to the patients. Prosthesis function was subsequently reassessed in these patients every fortnight for the first 3 months then once every quarter for the next 3 years, followed by once a year. Individual patient responses were evaluated at regular intervals. Components of prosthesis function assessed were esthetics, speech, mastication, and salivary control, all of which were restored to satisfactory levels by the definitive obturators. Thus, optimal restoration of esthetics and function is achievable despite a time lag in prosthodontic therapy after surgery.     

A simple method of fabricating an interim obturator prosthesis by duplicating the existing teeth and palatal form

An interim obturator prosthesis is required for the restoration of speech, deglutition, and improvement of esthetics after maxillectomy. This article describes a simple method for fabricating the interim obturator prosthesis by duplicating the patient's teeth and palate. The interim obturator prosthesis fabricated by duplication of the presurgical appearance and contour may be more acceptable to the patient.     

Sectional prosthesis with hollow obturator portion made of thin silicone layer over resin frame

Magnetically retained sectional obturator prostheses, consisting of a hollow obturator portion made of thin silicone layer over a resin frame and a denture portion, were fabricated to alleviate some of the limitations of silicone materials, and applied to two edentulous patients with maxillectomy defects. The silicone obturator allowed profound engagement of undercuts within the defect, resulting in adequate retention, support and stability of the prostheses for over 3 years. The patients have achieved improvement in speech and mastication without complications, by use of the obturator prostheses.     

Three-dimensional printed definitive cast for a silicone obturator prosthesis: A clinical report

For patients with head and neck cancer requiring a maxillectomy, obturator prostheses help with quality of life. These patients routinely require adjuvant oncologic treatments with significant adverse effects. Treatment sequelae can leave patients with difficulty speaking and swallowing, reduced salivary function, reduction in maximal incisal opening, and at risk of osteoradionecrosis. A 55-year-old African-American woman presented with significant trismus and reduction in maximal incisal opening after treatment for squamous cell carcinoma of the left maxillary sinus. She had received a left total maxillectomy with adjuvant chemotherapy and radiation treatments. With her reduced opening, she was no longer able to insert her interim obturator prosthesis, which caused difficulty speaking and nasal regurgitation. A cone beam computed tomography scan was made of the patient's maxillectomy defect. From the Digital Imaging and Communications in Medicine file, a definitive cast was 3-dimensionally printed to fabricate a flexible silicone obturator prosthesis. This treatment has allowed the patient to return to a functional quality of life and could help other patients in similar situations.     

A hollow definitive obturator fabrication technique for management of partial maxillectomy

Maxillary obturator prosthesis is the most frequent treatment option for management of partial or total maxillectomy. Heavy weight of the obturators is often a dislocating factor. Hollowing the prosthesis to reduce its weight is the well established fact. The alternate technique to hollow-out the prosthesis has been described in this article which is a variation of previously described processing techniques. A pre-shaped wax-bolus was incorporated inside the flasks during packing of the heat-polymerized acrylic resin to automatically create the hollow space. The processing technique described is a single step flasking procedure to construct a closed-hollow-obturator prosthesis as a single unit. To best understand the technique, this article describes management of a patient who had undergone partial maxillectomy secondary to squamous cell carcinoma rehabilitated with a hollow-obturator prosthesis.