Crystallographic Calculations and First-Principles Calculations of Heterogeneous Nucleation Potency of γ-Fe on La2O2S Particles

Rare earth (RE) inclusions with high melting points as heterogeneous nucleation in liquid steel have stimulated many recent studies. Evaluating the potency of RE inclusions as heterogeneous nucleation sites of the primary phase is still a challenge. In this work, the edge-to-edge matching (E2EM) model was employed to calculate the atomic matching mismatch and predict the orientation relationship between La₂O₂S and γ-Fe from a crystallographic point of view. A rough orientation relationship (OR) was predicted with the minimum values of fr=9.43% and fd=20.72% as follows: [21¯1¯0]La2O2S∥[100]γ-Fe and (0003¯)La2O2S∥(002¯)γ-Fe. The interface energy and bonding characteristics between La₂O₂S and γ-Fe were calculated on the atomic scale based on a crystallographic study using the first-principles calculation method. The calculations of the interface energy showed that the S-terminated and La(S)-terminated interface structures were more stable. The results of difference charge density, electron localization function (ELF), the Bader charges and the partial density of states (PDOS) study indicated that the La(S)-terminated interface possessed metallic bonds and ionic bonds, and the S-terminated interface exhibited metallic bond and covalent bond characteristics. This work addressed the stability and the characteristics of the La₂O₂S/γ-Fe interface structure from the standpoint of crystallography and energetics, which provides an effective theoretical support to the study the heterogeneous nucleation mechanism. As a result, La₂O₂S particles are not an effective heterogeneous nucleation site for the γ-Fe matrix from crystallography and energetics points of view.     

Reinforced 3D Composite Structures of γ-, α-Al2O3 with Carbon Nanotubes and Reduced GO Ribbons Printed from Boehmite Gels

The ability of boehmite to form printable inks has sparked interest in the manufacturing of 3D alumina (Al₂O₃) and composite structures by enabling direct ink writing methods while avoiding the use of printing additives. These materials may exhibit high porosity due to the printing and sintering procedures, depending on the intended application. The 3D-printed porous composite structures of γ-Al₂O₃ and α-Al₂O₃ containing 2 wt.% of carbon nanotubes or reduced graphene oxide ribbons were fabricated from boehmite gels, followed by different heat treatments. The reinforcing effect of these carbon nanostructures was evidenced by compression tests carried out on the different alumina structures. A maximum relative increase of 50% in compressive strength was achieved for the γ-Al₂O₃ composite structure reinforced with reduced graphene oxide ribbons, which was also accompanied by an increase in the specific surface area.     

Effective Attenuation of Electromagnetic Waves by Synergetic Effect of α-Fe2O3 and MWCNT/Graphene in LDPE-Based Composites for EMI Applications

In this study, a polymer nanocomposite is synthesized using magnetic and conducting fillers for enhanced electromagnetic interference (EMI) shielding. Alfa-ferrite (α-Fe₂O₃) nanoparticles with minimal multiwalled carbon nanotube (MWCNT) as low as 5 weight % in combination with variable concentrations of graphene nanoplatelets (GNP) are used as fillers in low-density polyethylene (LDPE) polymer matrix. Nanofillers and the polymer matrix are characterized by various techniques such as XRD, SEM, color mapping, EDAX, TGA, etc. The EMI shielding efficiency of the LDPE-based nanocomposites is tested using Vector Network Analyzer (VNA). The results showed that composite with LDPE:MWCNT:GNP:α-FO-50:5:40:5 displayed enhanced EMI shielding (in X-band (8.2–12.4 GHz) compared to other concentrations studied. This is due to the superior ohmic, dielectric, and magnetic losses at this particular composition and to the synergism amongst the filler. An attenuation of 99.99% was achieved for 5% α-Fe₂O₃. The mechanistic aspects of the shielding are discussed using permittivity, conductivity, and attenuation.     

Green Synthesis of Hexagonal Hematite (α-Fe2O3) Flakes Using Pluronic F127-Gelatin Template for Adsorption and Photodegradation of Ibuprofen

Hematite (α-Fe₂O₃) with uniform hexagonal flake morphology has been successfully synthesized using a combination of gelatin as natural template with F127 via hydrothermal method. The resulting hematite was investigated as adsorbent and photocatalyst for removal of ibuprofen as pharmaceutical waste. Hexagonal flake-like hematite was obtained following calcination at 500 °C with the average size was measured at 1–3 µm. Increasing the calcination temperature to 700 °C transformed the uniform hexagonal structure into cubic shape morphology. Hematite also showed high thermal stability with increasing the calcination temperatures; however, the surface area was reduced from 47 m²/g to 9 m²/g. FTIR analysis further confirmed the formation Fe-O-Fe bonds, and the main constituent elements of Fe and O were observed in EDX analysis for all samples. α-Fe₂O₃ samples have an average adsorption capacity of 55–25.5 mg/g at 12–22% of removal efficiency when used as adsorbent for ibuprofen. The adsorption capacity was reduced as the calcination temperatures increased due to the reduction of available surface area of the hexagonal flakes after transforming into cubes. Photocatalytic degradation of ibuprofen using hematite flakes achieved 50% removal efficiency; meanwhile, combination of adsorption and photocatalytic degradation further removed 80% of ibuprofen in water/hexane mixtures.     

Recognition of the antigen-presenting molecule MR1 by a Vδ3+ γδ T cell receptor

Unlike conventional αβ T cells, γδ T cells typically recognize nonpeptide ligands independently of major histocompatibility complex (MHC) restriction. Accordingly, the γδ T cell receptor (TCR) can potentially recognize a wide array of ligands; however, few ligands have been described to date. While there is a growing appreciation of the molecular bases underpinning variable (V)δ1⁺ and Vδ2⁺ γδ TCR-mediated ligand recognition, the mode of Vδ3⁺ TCR ligand engagement is unknown. MHC class I–related protein, MR1, presents vitamin B metabolites to αβ T cells known as mucosal-associated invariant T cells, diverse MR1-restricted T cells, and a subset of human γδ T cells. Here, we identify Vδ1/2⁻ γδ T cells in the blood and duodenal biopsy specimens of children that showed metabolite-independent binding of MR1 tetramers. Characterization of one Vδ3Vγ8 TCR clone showed MR1 reactivity was independent of the presented antigen. Determination of two Vδ3Vγ8 TCR-MR1-antigen complex structures revealed a recognition mechanism by the Vδ3 TCR chain that mediated specific contacts to the side of the MR1 antigen-binding groove, representing a previously uncharacterized MR1 docking topology. The binding of the Vδ3⁺ TCR to MR1 did not involve contacts with the presented antigen, providing a basis for understanding its inherent MR1 autoreactivity. We provide molecular insight into antigen-independent recognition of MR1 by a Vδ3⁺ γδ TCR that strengthens an emerging paradigm of antibody-like ligand engagement by γδ TCRs.

Characterized by both innate and adaptive immune cell functions, γδ T cells are an unconventional T cell subset. While the functional role of γδ T cells is yet to be fully established, they can play a central role in antimicrobial immunity (1), antitumor immunity (2), tissue homeostasis, and mucosal immunity (3). Owing to a lack of clarity on activating ligands and phenotypic markers, γδ T cells are often delineated into subsets based on the expression of T cell receptor (TCR) variable (V) δ gene usage, grouped as Vδ2⁺ or Vδ2⁻.The most abundant peripheral blood γδ T cell subset is an innate-like Vδ2⁺subset that comprises ∼1 to 10% of circulating T cells (4). These cells generally express a Vγ9 chain with a focused repertoire in fetal peripheral blood (5) that diversifies through neonatal and adult life following microbial challenge (6, 7). Indeed, these Vγ9/Vδ2⁺ T cells play a central role in antimicrobial immune response to Mycobacterium tuberculosis (8) and Plasmodium falciparum (9). Vγ9/Vδ2⁺ T cells are reactive to prenyl pyrophosphates that include isopentenyl pyrophosphate and (E)-4-Hydroxy-3-methyl-but-2-enyl pyrophosphate (8) in a butyrophilin 3A1- and BTN2A1-dependent manner (10–13). Alongside the innate-like protection of Vγ9/Vδ2⁺ cells, a Vγ9⁻ population provides adaptive-like immunobiology with clonal expansions that exhibit effector function (14).The Vδ2⁻ population encompasses the remaining γδ T cells but most notably the Vδ1⁺ and Vδ3⁺ populations. Vδ1⁺ γδ T cells are an abundant neonatal lineage that persists as the predominating subset in adult peripheral tissue including the gut and skin (15–18). Vδ1⁺ γδ T cells display potent cytokine production and respond to virally infected and cancerous cells (19). Vδ1⁺ T cells were recently shown to compose a private repertoire that diversifies, from being unfocused to a selected clonal TCR pool upon antigen exposure (20–23). Here, the identification of both Vδ1⁺ T_naive and Vδ1⁺ T_effector subsets and the Vδ1⁺ T_naive to T_effector differentiation following in vivo infection point toward an adaptive phenotype (22).The role of Vδ3⁺ γδ T cells has remained unclear, with a poor understanding of their lineage and functional role. Early insights into Vδ3⁺ γδ T cell immunobiology found infiltration of Vδ3⁺ intraepithelial lymphocytes (IEL) within the gut mucosa of celiac patients (24). More recently it was shown that although Vδ3⁺ γδ T cells represent a prominent γδ T cell component of the gut epithelia and lamina propria in control donors, notwithstanding pediatric epithelium, the expanding population of T cells in celiac disease were Vδ1⁺ (25). Although Vδ3⁺ IELs compose a notable population of gut epithelia and lamina propria T cells (∼3 to 7%), they also formed a discrete population (∼0.2%) of CD4⁻CD8⁻ T cells in peripheral blood (26). These Vδ3⁺ DN γδ T cells are postulated to be innate-like due to the expression of NKG2D, CD56, and CD161 (26). When expanded in vitro, these cells degranulated and killed cells expressing CD1d and displayed a T helper (Th) 1, Th2, and Th17 response in addition to promoting dendritic cell maturation (26). Peripheral Vδ3⁺ γδ T cells frequencies are known to increase in systemic lupus erythematosus patients (27, 28), and upon cytomegalovirus (29) and HIV infection (30), although, our knowledge of their exact role and ligands they recognize remains incomplete.The governing paradigms of antigen reactivity, activation principles, and functional roles of γδ T cells remain unresolved. This is owing partly due to a lack of knowledge of bona fide γδ T cell ligands. Presently, Vδ1⁺ γδ T cells remain the best characterized subset with antigens including Major Histocompatibility Complex (MHC)-I (31), monomorphic MHC-I–like molecules such as CD1b (32), CD1c (33), CD1d (34), and MR1 (35), as well as more diverse antigens such as endothelial protein coupled receptor (EPCR) and phycoerythrin (PE) (36, 37). The molecular determinants of this reactivity were first established for Vδ1⁺ TCRs in complex with CD1d presenting sulfatide (38) and α-galactosylceramide (α-GalCer) (34), which showed an antigen-dependent central focus on the presented lipids and docked over the antigen-binding cleft.In humans, mucosal-associated invariant T (MAIT) cells are an abundant innate-like αβ T cell subset typically characterized by a restricted TCR repertoire (39–43) and reactivity to the monomorphic molecule MR1 presenting vitamin B precursors and drug-like molecules of bacterial origin (41, 44–46). Recently, populations of atypical MR1-restricted T cells have been identified in mice and humans that utilize a more diverse TCR repertoire for MR1-recognition (42, 47, 48). Furthermore, MR1-restricted γδ T cells were identified in blood and tissues including Vδ1⁺, Vδ3⁺, and Vδ5⁺ clones (35). As seen with TRAV 1-2⁻, unconventional MAITs cells the isolated γδ T cells exhibited MR1-autoreactivity with some capacity for antigen discrimination within the responding compartment (35, 48). Structural insight into one such MR1-reactive Vδ1⁺ γδ TCR showed a down-under TCR engagement of MR1 in a manner that is thought to represent a subpopulation of MR1-reactive Vδ1⁺ T cells (35). However, biochemical evidence suggested other MR1-reactive γδ T cell clones would likely employ further unusual docking topologies for MR1 recognition (35).Here, we expanded our understanding of a discrete population of human Vδ3⁺ γδ T cells that display reactivity to MR1. We provide a molecular basis for this Vδ3⁺ γδ T cell reactivity and reveal a side-on docking for MR1 that is distinct from the previously determined Vδ1⁺ γδ TCR-MR1-Ag complex. A Vδ3⁺ γδ TCR does not form contacts with the bound MR1 antigen, and we highlight the importance of non–germ-line Vδ3 residues in driving this MR1 restriction. Accordingly, we have provided key insights into the ability of human γδ TCRs to recognize MR1 in an antigen-independent manner by contrasting mechanisms.     

Peculiarities of γ-Al2O3 Crystallization on the Surface of h-BN Particles

The main goal of the present work was to synthesize a composite consisting of h-BN particles coated with a γ-Al₂O₃ nanolayer. A method was proposed for applying nanocrystalline γ-Al₂O₃ to h-BN particles using a sol–gel technique, which ensures the chemical homogeneity of the composite at the nano level. It has been determined that during crystallization on the h-BN surface, the proportion of spinel in alumina decreases from 40 wt.% in pure γ-Al₂O₃ to 30 wt.% as a result of the involvement of the B³⁺ ions from the surface nitride monolayers into the transition complex. For comparison, nano-alumina was synthesized from the same sol under the same conditions as the composite. The characterization of the obtained nanostructured powders was carried out using TEM and XRD. A mechanism is proposed for the formation of a nanostructured γ-Al₂O₃@h-BN composite during the interaction of Al-containing sol and h-BN suspension in aqueous organic media. The resulting composite is a promising model of powdered raw materials for the development of fine-grained ceramic materials for a wide range of applications.     

Cross-α/β polymorphism of PSMα3 fibrils

The formation of ordered cross-β amyloid protein aggregates is associated with a variety of human disorders. While conventional infrared methods serve as sensitive reporters of the presence of these amyloids, the recently discovered amyloid secondary structure of cross-α fibrils presents new questions and challenges. Herein, we report results using Fourier transform infrared spectroscopy and two-dimensional infrared spectroscopy to monitor the aggregation of one such cross-α–forming peptide, phenol soluble modulin alpha 3 (PSMα3). Phenol soluble modulins (PSMs) are involved in the formation and stabilization of Staphylococcus aureus biofilms, making sensitive methods of detecting and characterizing these fibrils a pressing need. Our experimental data coupled with spectroscopic simulations reveals the simultaneous presence of cross-α and cross-β polymorphs within samples of PSMα3 fibrils. We also report a new spectroscopic feature indicative of cross-α fibrils.

Amyloids are elongated fibers of proteins or peptides typically composed of stacked cross β-sheets (1, 2). Self-assembling amyloids are notorious for their involvement in human neurodegenerative diseases such as Alzheimer’s and Parkinson’s diseases (1, 2). Phenol soluble modulins (PSMs) are amyloid peptides secreted by the bacteria Staphylococcus aureus (S. aureus) (3–5). Of the PSM family, PSMα3 is of recent interest due to its unique secondary structure upon fibrillation. Whereas other PSM variants undergo conformational changes with aggregation, the α-helical PSMα3 peptide retains its secondary structure while stacking in a manner reminiscent of β-sheets, forming what has been termed cross-α fibrils (3, 4, 6). Although “α-sheet” amyloid fibrils have been previously observed in two-dimensional infrared (2DIR) (7) and associated with PSMs (8), the novel cross-α fibril is distinct from that class of structures. To avoid confusion between these two similarly named but distinct secondary structures, a comparison between the α-sheet domain in cytosolic phosphatase A2 (9) (Protein Data Bank [PDB] identification:1rlw) (10) and cross-α fibrils adopted by PSMα3 (PDB ID:5i55) (3) has been highlighted in SI Appendix, Fig. S1. Interestingly, shorter terminations of PSMα3 have been shown to exhibit β-sheet polymorphs (11). The proposed cross-α fibril structure of the full-length PSMα3 peptide has been confirmed with X-ray diffraction and circular dichroism (4). The present study aims to further characterize these fibrils with linear and nonlinear infrared spectroscopies.S. aureus is an infectious human pathogen with the ability to form communities of microorganisms called biofilms that hinder traditional treatment methods (12–14). PSMs contribute to inflammatory response and play a crucial role in structuring and detaching biofilms (11, 12, 14). While biofilm growth requires the presence of multiple PSMs (14, 15), Andreasen and Zaman have demonstrated that PSMα3 acts as a scaffold, seeding the amyloid formation of other PSMs (5). To effectively inhibit S. aureus biofilm growth, a better understanding of PSMα3 aggregation is needed.The α-helical structure of PSMα3 (12) presents a challenge for probing the vibrational modes and secondary structure of both the monomer and the fibrils. While IR spectroscopy has been used extensively to characterize β-sheets (16–19), the spectral features associated with α-helices are difficult to distinguish from those of the random coil secondary structure (20, 21). This limitation has left researchers to date with an incomplete picture of the spectroscopic features unique to cross-α fibers. The present work combines a variety of 2DIR methods to remove these barriers and probe the active infrared vibrational modes of cross-α fibers.The full-length, 22-residue PSMα3 peptide was synthesized and prepared for aggregation studies following reported methods (3, 4, 11). A total of 10 mM PSMα3 was incubated in D₂O at room temperature over 7 d. These data were compared to the monomer treated under similar conditions. Monomeric samples were prepared at a significantly lower concentration of 0.5 mM to prevent aggregation. Fiber formation was confirmed by transmission electron microscopy (see SI Appendix, Fig. S2 for details). Fourier transform infrared (FTIR) spectra were taken for both the fibrils in solution as well as the low concentration monomers. Spectroscopic simulations of the PSMα3 monomer and fibers were performed on previously reported PDB structures (PDB identification: 5i55) (3) (Fig. 1).Open in a separate windowFig. 1.PDB structures of PSMα3 (A) monomers and (B) cross-α fibers extended along the screw axis. (C) FTIR spectra of 0.5 mM monomeric PSMα3 (blue) compared to the 10 mM PSMα3 fibril (red) in D₂O upon aggregation.     

SARS-CoV-2 Infects Human ACE2-Negative Endothelial Cells through an αvβ3 Integrin-Mediated Endocytosis Even in the Presence of Vaccine-Elicited Neutralizing Antibodies

Integrins represent a gateway of entry for many viruses and the Arg-Gly-Asp (RGD) motif is the smallest sequence necessary for proteins to bind integrins. All Severe Acute Respiratory Syndrome Virus type 2 (SARS-CoV-2) lineages own an RGD motif (aa 403–405) in their receptor binding domain (RBD). We recently showed that SARS-CoV-2 gains access into primary human lung microvascular endothelial cells (HL-mECs) lacking Angiotensin-converting enzyme 2 (ACE2) expression through this conserved RGD motif. Following its entry, SARS-CoV-2 remodels cell phenotype and promotes angiogenesis in the absence of productive viral replication. Here, we highlight the α_vβ₃ integrin as the main molecule responsible for SARS-CoV-2 infection of HL-mECs via a clathrin-dependent endocytosis. Indeed, pretreatment of virus with α_vβ₃ integrin or pretreatment of cells with a monoclonal antibody against α_vβ₃ integrin was found to inhibit SARS-CoV-2 entry into HL-mECs. Surprisingly, the anti-Spike antibodies evoked by vaccination were neither able to impair Spike/integrin interaction nor to prevent SARS-CoV-2 entry into HL-mECs. Our data highlight the RGD motif in the Spike protein as a functional constraint aimed to maintain the interaction of the viral envelope with integrins. At the same time, our evidences call for the need of intervention strategies aimed to neutralize the SARS-CoV-2 integrin-mediated infection of ACE2-negative cells in the vaccine era.     

A High-Performance ε-Ga2O3-Based Deep-Ultraviolet Photodetector Array for Solar-Blind Imaging

One of the most important applications of photodetectors is as sensing units in imaging systems. In practical applications, a photodetector array with high uniformity and high performance is an indispensable part of the imaging system. Herein, a photodetector array (5 × 4) consisting of 20 photodetector units, in which the photosensitive layer involves preprocessing commercial ε-Ga₂O₃ films with high temperature annealing, have been constructed by low-cost magnetron sputtering and mask processes. The ε-Ga₂O₃ ultraviolet photodetector unit shows excellent responsivity and detectivity of 6.18 A/W and 5 × 10¹³ Jones, respectively, an ultra-high light-to-dark ratio of 1.45 × 10⁵, and a fast photoresponse speed (0.14/0.09 s). At the same time, the device also shows good solar-blind characteristics and stability. Based on this, we demonstrate an ε-Ga₂O₃-thin-film-based solar-blind ultraviolet detector array with high uniformity and high performance for solar-blind imaging in optoelectronic integration applications.     

Investigation on Crystallization and Magnetic Properties of (Nd,Pr, Ce)2Fe14B/α-Fe Nanocomposite Magnets by Microwave Annealing Treatment

In the present work, the structures and magnetic properties of (Nd, Pr, Ce) ₂Fe₁₄B/α-Fe nanocomposite magnets were thoroughly investigated. The microwave annealing was applied to achieve a uniform heating effect and uniform grains. Microwave annealing is more favorable to obtain α-Fe phase than conventional annealing, which leads to the enhanced coercivity of hysteresis loops. The coercivity of nanocomposite magnets was 245 kA/m after annealing at 2000 W for 10 min.     

Characterization of Adaptive-like γδ T Cells in Ugandan Infants during Primary Cytomegalovirus Infection

Gamma-delta (γδ) T cells are unconventional T cells that help control cytomegalovirus (CMV) infection in adults. γδ T cells develop early in gestation, and a fetal public γδ T cell receptor (TCR) clonotype is detected in congenital CMV infections. However, age-dependent γδ T cell responses to primary CMV infection are not well-understood. Flow cytometry and TCR sequencing was used to comprehensively characterize γδ T cell responses to CMV infection in a cohort of 32 infants followed prospectively from birth. Peripheral blood γδ T cell frequencies increased during infancy, and were higher among CMV-infected infants relative to uninfected. Clustering analyses revealed associations between CMV infection and activation marker expression on adaptive-like Vδ1 and Vδ3, but not innate-like Vγ9Vδ2 γδ T cell subsets. Frequencies of NKG2C⁺CD57⁺ γδ T cells were temporally associated with the quantity of CMV shed in saliva by infants with primary infection. The public γδ TCR clonotype was only detected in CMV-infected infants <120 days old and at lower frequencies than previously described in fetal infections. Our findings support the notion that CMV infection drives age-dependent expansions of specific γδ T cell populations, and provide insight for novel strategies to prevent CMV transmission and disease.     

Liquid-Phase-Assisted Catalytic Nitridation of Silicon and In Situ Growth of α-Si3N4

Si₃N₄ powders were synthesized with Fe, Co, or Ni as catalysts using Si powder at 1250 °C in a nitrogen atmosphere by liquid-phase-assisted catalytic nitridation synthesis (LPA–CNS). The catalytic effects of the metals on the nitridation of silicon powder were investigated by mixing the powder with 2 wt% by mass of Fe, Co, or Ni in a high-temperature liquid phase in flowing nitrogen. The α-Si₃N₄ micro-morphology could be effectively changed by adjusting the type of catalyst in the initial reaction mixtures. Fe, Co, and Ni promoted the formation of α-Si₃N₄ at 1250 °C and controlled the morphology of the α-Si₃N₄ particles. The hexagonal flakes of α-Si₃N₄ with a better defined morphology were obtained using Ni as the catalyst, compared to that obtained from the other two catalysts.     

Fabrication and Adsorption Optimization of Novel Magnetic Core-shell Chitosan/Graphene Oxide/β-cyclodextrin Composite Materials for Bisphenols in Aqueous Solutions

A novel magnetic composite material, Fe₃O₄@SiO₂/chitosan/graphene oxide/β-cyclodextrin (MCGC), was prepared by multi-step methods. Various methods were used to systematically characterize the morphology, composition, structure, and magnetic properties of MCGC. The results obtained show that the composite material has good morphology and crystal structure and can be separated quickly by an external magnetic field. The operation is relatively easy, and the raw materials used to prepare this material are economical, easy to obtain, and environmentally friendly. The performance and adsorption mechanism for using this material as an adsorbent to remove bisphenol A (BPA) and bisphenol F (BPF) from water were studied. The adsorption parameters were optimized. Under optimal conditions, MCGC was found to remove more than 90% of BPA and BPF in a mixed solution (20 mg/L, 50 mL); the adsorption process for BPA and BPF on MCGC was found to follow a Redlich–Peterson isotherm model and Pseudo-second-order kinetic model. The adsorption mechanism for MCGC may involve a combination of various forces. Recycling experiments showed that after five uses, MCGC retained a more than 80% removal effect for BPA and BPF, and through real sample verification, MCGC can be used for wastewater treatment. Therefore, MCGC is economical, environmentally friendly, and easy to separate and collect, and has suitable stability and broad application prospects.     

Comparative Evaluation of the Foot-and-Mouth Disease Virus Permissive LF-BK αVβ6 Cell Line for Senecavirus A Research

Senecavirus A (SVA) is a member of the family Picornaviridae and enzootic in domestic swine. SVA can induce vesicular lesions that are clinically indistinguishable from Foot-and-mouth disease, a major cause of global trade barriers and agricultural productivity losses worldwide. The LF-BK α_Vβ₆ cell line is a porcine-derived cell line transformed to stably express an α_Vβ₆ bovine integrin and primarily used for enhanced propagation of Foot-and-mouth disease virus (FMDV). Due to the high biosecurity requirements for working with FMDV, SVA has been considered as a surrogate virus to test and evaluate new technologies and countermeasures. Herein we conducted a series of comparative evaluation in vitro studies between SVA and FMDV using the LF-BK α_Vβ₆ cell line. These include utilization of LF-BK α_Vβ₆ cells for field virus isolation, production of high virus titers, and evaluating serological reactivity and virus susceptibility to porcine type I interferons. These four methodologies utilizing LF-BK α_Vβ₆ cells were applicable to research with SVA and results support the current use of SVA as a surrogate for FMDV.     

Tailoring the Stability of Ti-Doped Sr2Fe1.4TixMo0.6−xO6−δ Electrode Materials for Solid Oxide Fuel Cells

In this work, the stability of Sr₂(FeMo)O_6−δ-type perovskites was tailored by the substitution of Mo with Ti. Redox stable Sr₂Fe_1.4Ti_xMo_0.6−xO_6−δ (x = 0.1, 0.2 and 0.3) perovskites were successfully obtained and evaluated as potential electrode materials for SOFCs. The crystal structure as a function of temperature, microstructure, redox stability, and thermal expansion properties in reducing and oxidizing atmospheres, oxygen content change, and transport properties in air and reducing conditions, as well as chemical stability and compatibility towards typical electrolytes have been systematically studied. All Sr₂Fe_1.4Ti_xMo_0.6−xO_6−δ compounds exhibit a regular crystal structure with Pm-3m space group, showing excellent stability in oxidizing and reducing conditions. The increase of Ti-doping content in materials increases the thermal expansion coefficient (TEC), oxygen content change, and electrical conductivity in air, while it decreases the conductivity in reducing condition. All three materials are stable and compatible with studied electrolytes. Interestingly, redox stable Sr₂Fe_1.4Ti_0.1Mo_0.5O_6−δ, possessing 1 μm grain size, low TEC (15.3 × 10⁻⁶ K⁻¹), large oxygen content change of 0.72 mol·mol⁻¹ between 30 and 900 °C, satisfactory conductivity of 4.1–7.3 S·cm⁻¹ in 5% H₂ at 600–800 °C, and good transport coefficients D and k, could be considered as a potential anode material for SOFCs, and are thus of great interest for further studies.     

An A- and B-Site Substitutional Study of SrFeO3−δ Perovskites for Solar Thermochemical Air Separation

An A‑ and B‑site substitutional study of SrFeO_3−δ perovskites (A’_xA_1−xB’_yB_1−yO_3−δ, where A = Sr and B = Fe) was performed for a two‑step solar thermochemical air separation cycle. The cycle steps encompass (1) the thermal reduction of A’_xSr_1−xB’_yFe_1−yO_3−δ driven by concentrated solar irradiation and (2) the oxidation of A’_xSr_1−xB’_yFe_1−yO_3−δ in air to remove O₂, leaving N₂. The oxidized A’_xSr_1−xB’_yFe_1−yO_3−δ is recycled back to the first step to complete the cycle, resulting in the separation of N₂ from air and concentrated solar irradiation. A-site substitution fractions between 0 ≤ x ≤ 0.2 were examined for A’ = Ba, Ca, and La. B-site substitution fractions between 0 ≤ y ≤ 0.2 were examined for B’ = Cr, Cu, Co, and Mn. Samples were prepared with a modified Pechini method and characterized with X-ray diffractometry. The mass changes and deviations from stoichiometry were evaluated with thermogravimetry in three screenings with temperature- and O₂ pressure-swings between 573 and 1473 K and 20% O₂/Ar and 100% Ar at 1 bar, respectively. A’ = Ba or La and B’ = Co resulted in the most improved redox capacities amongst temperature- and O₂ pressure-swing experiments.     

Peripheral T cell receptors αβ and γδ in patients with Hodgkin's lymphoma

Antigen recognition by T cells is determined by an antigen specific T cell receptor (TCR). Two heterodimeric TCR structures associated with CD3 have been defined: TCR αβ and TCR γδ. TCR αβ and its function are well described but the role of TCR γδ in normal and lymphoproliferative disorders is not well established. In newly diagnosed or relapsed/refractory Hodgkin's disease (HD), a disease associated with defective T cell functions and increased sIL-2R, We determined levels of seven TCR αβ variable regions [βV5(a), βV5(b), βV6(a), βV12(a), αβV(a), αV2(a)] and TCR γδ by using monoclonal antibodies (MCA). TCR γδ levels did not show any difference, but several variable regions of the TCR αβ differed when groups are compared with each other and the control group.     

Human Adenovirus Type 26 Induced IL-6 Gene Expression in an αvβ3 Integrin- and NF-κB-Dependent Manner

The low seroprevalent human adenovirus type 26 (HAdV26)-based vaccine vector was the first adenovirus-based vector to receive marketing authorization from European Commission. HAdV26-based vaccine vectors induce durable humoral and cellular immune responses and, as such, represent a highly valuable tool for fighting infectious diseases. Despite well-described immunogenicity in vivo, the basic biology of HAdV26 still needs some refinement. The aim of this study was to determine the pro-inflammatory cytokine profile of epithelial cells infected with HAdV26 and then investigate the underlying molecular mechanism. The expression of studied genes and proteins was assessed by quantitative polymerase chain reaction, western blot, and enzyme-linked immunosorbent assay. Confocal microscopy was used to visualize HAdV26 cell uptake. We found that HAdV26 infection in human epithelial cells triggers the expression of pro-inflammatory cytokines and chemokines, namely IL-6, IL-8, IL-1β, and TNF-α, with the most pronounced difference shown for IL-6. We investigated the underlying molecular mechanism and observed that HAdV26-induced IL-6 gene expression is αvβ3 integrin dependent and NF-κB mediated. Our findings provide new data regarding pro-inflammatory cytokine and chemokine expression in HAdV26-infected epithelial cells, as well as details concerning HAdV26-induced host signaling pathways. Information obtained within this research increases our current knowledge of HAdV26 basic biology and, as such, can contribute to further development of HAdV26-based vaccine vectors.     

A Simple and Efficient Method for Preparing High-Purity α-CaSO4·0.5H2O Whiskers with Phosphogypsum

A simple and efficient approach for the high-purity CaSO₄·2H₂O (DH) whiskers and α-CaSO₄·0.5H₂O (α-HH) whiskers derived from such phosphogypsum (PG) was proposed. The impact of different experimental parameters on supersaturated dissolution–recrystallization and preparation processes of α-CaSO₄·0.5H₂O was elaborated. At 3.5 mol/L HCl concentration, the dissolution temperature and time were 90 °C and 20 min, respectively. After eight cycles and 5–8 times cycles, total crystallization amount of CaSO₄·2H₂O was 21.75 and 9.97 g/100 mL, respectively, from supersaturated HCl solution. The number of cycles affected the shape and amount of the crystal. Higher HCl concentration facilitated CaSO₄·2H₂O dissolution and created a much higher supersaturation, which acted as a larger driving force for phase transformation of CaSO₄·2H₂O to α-CaSO₄·0.5H₂O. The HCl solution system’s optimum experimental conditions for HH whiskers preparation involved acid leaching of CaSO₄·2H₂O sample, with HCl concentration 6.0 mol/L, reaction temperature 80 °C, and reaction time 30 min–60 min. Under the third cycle conditions, α-CaSO₄·0.5H₂O whiskers were uniform in size, clear, and distinct in edges and angles. The length range of α-CaSO₄·0.5H₂O whiskers was from 106 μm to 231 μm and diameter range from 0.43 μm to 1.35 μm, while the longest diameter ratio was 231. Purity of α-CaSO₄·0.5H₂O whiskers was approximately 100%, where whiteness reached 98.6%. The reuse of the solution enables the process to discharge no waste liquid. It provides a new reference direction for green production technology of phosphogypsum.