Coracoclavicular ligament attachment regions of the Chinese population: a quantitative anatomic study

It is reported that the coracoclavicular (CC) ligaments arise at a constant region, which is proportional to the size of the clavicle and the coracoid process. However, all cadavers in those studies were from whites or African-Americans. The aim of this study was to evaluate dimension and orientation of CC footprints in Chinese cadavers and to determine whether race-dependent differences in these measurements exist. A total of 172 shoulders from 87 Chinese cadavers were used in this study, and the CC ligaments including the coracoid and the lateral clavicle were exposed. After measurement of the length of the CC ligaments, the ligaments were dissected and the insertion sites as well as the footprint centers were identified and marked. Each CC insertion dimension and its distance to the bony landmarks were recorded. Ratios representing the distance from the clavicular landmarks to each footprint center divided by clavicular length and clavicular width were calculated. These ratios were calculated for the coracoid process as well. The mean length of the clavicle and the coracoid process was 139.9 ± 9.4 and 40.5 ± 4.0 mm. The distance from the lateral edge of the clavicle to the conoidal center and to the trapezoidal center was 35.7 ± 3.4 and 21.8 ± 2.7 mm, respectively. The distance from the tip of the coracoid to the conoidal center and to the trapezoidal center was 35.1 ± 3.2 and 29.7 ± 2.9 mm, respectively. The ratios of the distance to the conoidal center and to the trapezoidal center divided by clavicular length and coracoidal length were 25.5, 15.6, 86.8 and 73.4 %, respectively. While absolute differences in the origin of the CC ligaments exist between different races, the ratio of these origins to the size of the clavicle and the coracoid process is constant.     

Proposed surgical technique to facilitate targeted reinnervation of the infraspinatus: A cadaveric feasibility study

Restoration of shoulder lateral rotation remains a significant challenge following brachial plexus injury. Transfer of the accessory nerve to suprascapular nerve (SSN) has been widely performed, although with generally poor outcomes for lateral rotation. A recent report suggested a selective infraspinatus reinnervation technique using a radial nerve branch for SSN transfer. This cadaveric study was performed in 7 specimens (14 shoulders). We present technical modifications to achieve additional length to the recipient nerve (suprascapular) that would facilitate direct repair. Key elements of the technique are (1) isolation of the SSN immediately distal to its motor branch to supraspinatus near the superior transverse scapular ligament; and (2) delivery of the transected SSN through the spinoglenoid notch and deep to the infraspinatus for emergence in the infraspinatus‐teres minor interval. Nerve overlap of at least 21 mm was observed in all 14 dissected shoulders between the harvested SSN and radial nerve branches. The mean nerve overlap between harvested branches was 26 mm (range 21–32 mm). The mean harvested SSN length was 59 mm (range 46–80 mm). The mean length of the harvested radial nerve branch was 72 mm (range 65–85 mm). No measurements were significantly different between left and right shoulders or between males and females (smallest P value = 0.1249). Nerve diameter of the two harvested branches was judged to be appropriately compatible for surgical coaptation in all 14 dissected shoulders. We present a variation on a described technique to increase recipient suprascapular nerve length. Additional length of the recipient nerve is achieved through utilization of a more proximal dissection of the suprascapular nerve near the level of the superior transverse scapular ligament and delivering the nerve through the teres minor‐infraspinatus interval. These surgical modifications are of clinical interest when selective reinnervation of the infraspinatus muscle is considered. We believe such a targeted approach can potentially increase shoulder lateral rotation function. Clin. Anat. 32:131–136, 2019. © 2018 Wiley Periodicals, Inc.     

Biomechanics of the deltoideus

The objective of this study was to determine the direction of the migration engendered by the middle deltoideus on the upper end of the humerus. Eleven patients suffering from shoulder pathology underwent an MRI examination (3 mm thick slices). From these MRI slices, 3D reconstructions were obtained for each patient by using a manual data capture system (SliceOmatic^®). From this geometry, a mechanical model of the deltoideus was produced, taking into account the contacts between the latter and the following anatomical parts: supraspinatus, infraspinatus and humeral head. For the 11 shoulders, we have obtained a deltoideus showing a global resultant oriented upwards. There was, however, a component oriented downwards (at the level of the humeral head), its intensity being 40–80% less than the component oriented upwards (at the level of the deltoideus V). It is important to note that this study is valid only in the initial degrees of lateral elevation. The deltoideus is an elevator muscle of the humeral head in the glenoid, presenting nevertheless a component oriented downwards. The deltoideus would, therefore, intervene to recenter the shoulder during an abduction movement.     

新型双叶型肱骨近端锁定钢板的研制与生物力学研究

目的研制新型双叶型肱骨近端锁定钢板以解决复杂肱骨近端骨折大、小结节的固定问题,并通过生物力学实验评估其固定肱骨大、小结节的稳定性。方法取12具新鲜冰冻带肩袖肌的肱骨标本,编号后随机分成A、B两组,建立相同的肱骨大、小结节骨折模型。其中,A组用新型双叶型肱骨近端锁定钢板固定;B组用肱骨近端锁定钢板系统(proximal humeral internal locking system,PHILOS)、缝线缝合固定,小结节同时加用1枚3.5 mm空心螺钉固定。分别对两组标本进行肩胛下肌、冈下肌及小圆肌、冈上肌牵拉实验及大、小结节抗拉实验测试。结果肩胛下肌牵拉实验:A组在180 N拉力以及疲劳实验后位移均明显小于B组(P0.05)。冈下肌及小圆肌牵拉实验:两组在150 N拉力以及疲劳实验后位移比较差异均无统计学意义(P0.05)。冈上肌牵拉实验:两组在90 N拉力以及疲劳实验后位移比较差异均无统计学意义(P0.05)。小结节抗拉实验:A组失效载荷明显大于B组,且A组失效位移明显小于B组(P0.05)。大结节抗拉实验:两组在失效载荷、失效位移比较差异均无统计学意义(P0.05)。结论该新型双叶型肱骨近端锁定钢板对肱骨小结节的固定效果较缝线+空心钉螺钉固定更坚强,具有能同时固定大、小结节的优势。研究结果为临床治疗复杂肱骨近端骨折提供新的选择。     

Teres major muscle – insertion footprint

Teres major muscle (TM) and latissimus dorsi muscle (LD) are frequently used in muscle transfers around the shoulder girdle. Some authors have suggested harvesting techniques in which the muscle is detached in continuity with a bone segment. Information on the bony attachment footprint of these muscles is lacking. The purpose of this study was to investigate the region of attachment of the TM to facilitate safe and complete harvesting with a bone segment where it is indicated, and to determine the relationship of the TM footprint with that of the LD. Twenty‐eight upper extremities of 14 human cadavers (six female, eight male) were investigated during the students’ dissection course in the winter term 2012. The attachment footprints were photographed and the images were processed with Image J Version 1.46r. The TM attachment footprint at the crest of the lesser tubercle had an average dimension of 187 ± 89 mm². It was 49.6 ± 7.9 mm long and 7.4 ± 2.5 mm wide. The bony attachment of the LD within the bicipital groove, just below the tendon of the long head of the biceps muscle, had an area of 94 ± 37 mm². It was 36.5 ± 8 mm long and 3.7 ± 1.2 mm wide. Both muscles were separated by 4.4 ± 1.7 mm and their attachments overlapped in the craniocaudal direction by 24.4 ± 12.4 mm. Earlier studies have investigated the dimensions of the muscles’ tendons close to the attachment not the bony attachment itself. The dimension of the attachment of the TM was larger than that of the LD. The ratio between the footprint areas was approximately 2:1. This information should be considered by surgeons undertaking transfers, which include a bony segment of the muscle insertion.     

Medial calcar of proximal humeral fracture as landmark in restoration of humeral length in case of hemiarthroplasty

Purpose

Several methods to restore the appropriate length of the humerus in the case of proximal humeral fractures treated by hemiarthroplasty have been previously published. Our study evaluates the possibility of using the medial calcar of humerus for humeral length reconstruction not based on preoperative planning.

Methods

Preparations of 320 dry humeral bones were used for the purpose of the study. Points of interest were marked on each bone: the most proximal point of the humeral head, the crest of greater tuberosity, diameters of the head, the anatomical and surgical necks. Proximal parts of bones were then scanned from two angles with a digital camera and all measurements were performed on calibrated photographs. We compared accuracy in humeral length reconstruction using insertion of the pectoralis major and the area of medial calcar where usually a fracture develops.

Results

The distance between the top part of the humeral head and the insertion of pectoralis major was 54.1 ± 6.0 mm. The distance between the lateral margin of the anatomical neck and the medial calcar was 51.4 ± 4.3 mm. We compared these data with diameters of the humeral head.

Conclusions

The site of the fracture can be used for the reconstruction of the humeral length with greater accuracy than area of the pectoralis major insertion. We suggest that to obtain the final distance between the lateral margin of the artificial head and medial calcar of the fracture 2–3 mm should be added to the diameter of the head.     

Pedicle island flaps of latissimus dorsi. Applications in surgical repair of ruptures of the rotator cuff

Abstract There are considerable problems in repair of major ruptures of the rotator cuff tendons particularly those of the supra and infraspinatus mm. The Gerber technique only transfers the tendinous insertion of the latissimus dorsi onto the greater tuberosity in massive cuff ruptures. We have extended this approach. In 12 shoulders, we studied the feasibility of a latissimus dorsi transfer harvested to fit and bearing muscle and tendon detached at its two extremities and transposed as a neurovascular island. The muscular part is transferred to the infra or supraspinous fossae and the tendon to the greater tuberosity with the aim of reactivating the infra and supraspinatus muscles. The lateral bundle of the latissimus dorsi is always transferable on its neurovascular pedicle into the infraspinous fossa, even into the supraspinous fossa, or into both if transfer is used as a bilobed flap. This anatomical work allowed a parallel study of the different possibilities of transposing the neurovascular pedicle, which might limit the technique, and also to determine the most appropriate surgical approach.     

肱骨大结节侧面观分型及其临床意义*

目的： 通过对肱骨大结节侧面观分型，探究其临床意义。方法： 选取2018 年6 月~2020 年6 月西南医科大 学附属中医医院患者292 例肩胛骨CT图像，根据肱骨大结节侧面观大结节的形态，进行分型；同时测量患者大 结节最高点与肱骨头最高点的距离、冈上肌、冈下肌、小圆肌、小结节止点的边长面积、及结节间沟的宽度、深 度。结果： 肱骨大结节依据侧面观形态可分为3 种类型，丘型46.92%、平坦型26.71%、弧型26.37%。132 名肩 袖损伤患者的CT三维重建图分析中，弧型23.5%、平坦型17.4%、丘型59.1%。丘型的冈上肌止点边长均小于平 坦型和弧型边长，差异具有统计学意义；丘型的冈上肌止点面积均小于平坦型和弧型，差异具有统计学意义。结 论： 肱骨大结节不同的侧面观分型对于预防、治疗肩峰下撞击综合征及肩袖损伤具有临床指导意义。     

Morphometry of the proximal tibia to design the tibial component of total knee arthroplasty for the Korean population

We carried out an anthropometric analysis using three dimensional computer tomographic measurements of the cut surface of the proximal tibia in 200 knees that were obtained from 50 male and 50 female Korean cadavers. We measured the mediolateral (ML), middle anteroposterior (AP), medial and lateral anteroposterior dimensions and the aspect ratio (ML/AP) of the resected proximal tibial surface; we then compared this data with the five conventionally used symmetric total knee components. We found that the ML (73.5+/-5.6 mm) and AP (47.3+/-3.8 mm) average dimensions of our study population were smaller than the dimensions of the symmetric commercially available TKA implants. We found a progressive decrease in the aspect ratio with the increasing anteroposterior dimension of the proximal tibia, as compared to the constant aspect ratio shown by the conventional tibial prostheses. The smaller sized prostheses were found to show mediolateral undersizing and the larger sized prostheses were found to show mediolateral overhang. This study may provide guidelines for designing a suitable tibial component of total knee prostheses for the Korean population, the aspect ratio of which decreases with increasing anteroposterior dimension.     

Quantified relationships of the radial nerve with the radial groove and selected humeral landmarks

Anatomical relationships between the radial nerve, the deltoid muscle insertions and several bony landmarks have been investigated to assess the feasibility of surgical transfer of the deltoid transfer during humeral osteotomy. Eleven embalmed human specimens were dissected. Each specimen included the whole thorax, both shoulders and upper limbs. Spatial position of the radial nerve along the radial groove, the deltoid muscle, and several anatomical landmarks was digitised using a three-dimensional (3D) digitiser. Sixteen distances and one angle characterizing the relationships between the path of the radial nerve and the landmarks were processed. Results showed that the average distance between the emergence of the radial nerve from the lateral intermuscular septum and the most distal insertion point of the deltoid muscle on the humeral bone shaft was 47.6 ± 18.5 mm. The angle between a line extending from the entry of the radial nerve into the radial sulcus and its point of emergence (REN–REM line), and on the other hand a line running from the radial emergence and the deltoid muscle tip (REM–DELTIP line) was in average 23.5 ± 6.7°. The length of four lines running perpendicular to REM–DELTIP and crossing each quarter of the REN–REM line were interpolated. The length of these four lines was, from proximal to distal, 31.3 ± 11.5 mm; 23.0 ± 7.8 mm; 16.5 ± 6.2 mm; and 7.6 ± 2.6 mm, respectively. These results described in a quantitative way the path of the radial nerve in respect to the humeral bone and the deltoid muscle. These data will be used for further development of a humeral osteotomy protocol taking into account the spatial position of the radial nerve to orientate safely the surgical tools used to cut the humeral shaft.     

Anatomical study of the communicating branches of cords of the brachial plexus and their clinical implications

The aim of this study was to investigate the occurrence and patterns of the communicating branches of cords of the brachial plexus (BPs). This study was performed with 50 fixed adult cadavers (all 100 sides). The BPs were exposed, the presence of the communicating branches of BPs were determined, measured, and photographed. The communicating branches were identified in 27 sides of the BPs. According to enthesis, the communicating branches between the medial and lateral cords (25 sides) were divided into five types. The most common branches connected the lateral cord with the medial root of the median nerve (16 sides). All the communicating branches between the lateral and medial cords obliquely crossed anterior to the axillary artery and passed below the thoracoacromial artery trunk. The distance of the communicating branch with the origin of thoracoacromial artery trunk was 1.60 ± 0.64 cm. The length, transverse diameter, and anteroposterior diameter of communicating branch were 1.67 ± 0.62 cm, 1.77 ± 0.63 mm, and 1.91 ± 0.34 mm, respectively. These anatomical data about the communicating branches will be helpful for surgeons who perform surgical procedures in the cervical and axillary regions. Clin. Anat. 27:631–636, 2014. © 2013 Wiley Periodicals, Inc.     

Anteroposterior distance between the tibial tuberosity and trochlear groove in patients with patellar instability

BackgroundOur objective was to describe a measurement to assess sagittal tibial tuberosity (TT)–trochlear groove (TG) distance and to compare this between asymptomatic (control) patients and patients with symptomatic patellar instability.MethodsWe compared static CT images of 22 fully extended knees of patients with symptomatic patellar instability with images of 22 asymptomatic knees. TT–TG distance was measured to quantify lateralization of the TT, and anteroposterior TT–TG distance was used to quantify the sagittal distance between these two points. Lateral trochlear inclination, sulcus angle, and trochlear depth were measured. Groups were compared using paired t tests (alpha = 0.05). Correlations of anteroposterior TT–TG distance with lateral trochlear inclination, sulcus angle, and trochlear depth were assessed using linear and multivariate regression.ResultsMean TT–TG distances were 19.9 ± 4.4 mm (symptomatic) and 16.8 ± 5.5 mm (control) (mean ± std deviation) (P = 0.002). Mean anteroposterior TT–TG distances were 8.3 ± 7.8 mm (symptomatic) and ? 0.5 ± 4.6 mm (control) (P < 0.0001). The symptomatic group had greater measurements of trochlear dysplasia, with lower lateral trochlear inclination, greater sulcus angle, and lower trochlear depth (all P < 0.0001). Anteroposterior TT–TG distance and trochlear depth were strongly negatively correlated (r = 0.62, R² = 0.39, P < 0.0001).ConclusionsIn asymptomatic patients, the anteroposterior TT–TG distance was ? 0.5 mm, indicating that the TG and TT were nearly in the same coronal plane. In patients with symptomatic patellar instability, the TG was almost nine millimeters anterior, and this distance correlated with measurements of trochlear dysplasia.Level of evidenceIII, case control study.     

Quantitative morphology of full thickness rotator cuff tears

The occurrence of full thickness rotator cuff tears (RCTs) at time of death, the size and distribution of those tears among the tendons of the rotator cuff, and the anterior to posterior and medial to lateral dimensions of the RCTs were determined. A subset of 57 shoulders from a group of 414 were found to have full thickness rotator cuff tears. The three-dimensional coordinates of specific bony landmarks and points defining the circumference of the RCT were digitized using a Flock of Birds DC electromagnetic tracking device. Bony landmarks were used to determine the separation between adjacent tendons of the rotator cuff. Points describing the circumference of the RCT were used to calculate the area of the tear. The majority of tears occurred in the supraspinatus tendon alone (25), or in both the supraspinatus and infraspinatus tendons (22). The areas of the RCTs ranged from 0.07 cm(2) to 19.17 cm(2) with an average of 4.43 cm(2). The mean anterior to posterior length was 1.95 cm. The mean medial to lateral length was 1.98 cm.     

Localized Rotator Cuff Tendon Degeneration for Cadaveric Shoulders with and Without Tears Isolated to the Supraspinatus Tendon

Localized differences in tissue degeneration throughout intact and torn rotator cuff tendons have not been well quantified. The objective of this study was to investigate histological differences in localized degeneration in tendons with and without rotator cuff tears isolated to the supraspinatus tendon. Four intact shoulders and four shoulders with rotator cuff tears isolated to the supraspinatus tendon were dissected down to the infraspinatus and supraspinatus tendons. Biopsies were taken throughout the tendon insertion, mid-substance, myotendinous junction, and around the tear if present. Samples were stained with hematoxylin and eosin and tendon degeneration was graded based on collagen fiber organization, nuclei shape, cellularity, and lipoid degeneration. Comparisons in degeneration parameters were made based on the tendon type (supraspinatus vs. infraspinatus), location within the tendon, and presence of a tear. Supraspinatus tendons exhibited more degeneration than the infraspinatus tendon (P < 0.05). Significant increases in lipoid degeneration were found near the myotendinous junction compared to the rest of the tendon (P < 0.001). Tendons with rotator cuff tears showed greater amounts of lipoid degeneration compared to intact tendons (P = 0.03). A strong negative correlation was found between lipoid degeneration and collagen fiber organization (r = −0.922, P = 0.001). No differences in degeneration were found between medial, anterior, and posterior edges of the tear. The study highlights specific factors of tendon degeneration contributing to the local differences in tendon degeneration. By understanding local differences in tendon degeneration, surgical protocols for repair can be improved. Clin. Anat., 33:1007–1013, 2020. © 2019 Wiley Periodicals, Inc.     

Cranial translation of the humeral head on radiographs in rotator cuff tear patients: the modified active abduction view

Cranial translation of the humeral head is related to massive rotator cuff tears; however, it may be unapparent in early-stage tears. The goal of this study was to investigate whether active abduction leads to increased active cranial humeral translation in early-stage tears. We assessed 20 consecutive patients (9 full-thickness supraspinatus tears, 11 posterosuperior tears) using the newly introduced modified active abduction view: acromiohumeral (AH) distance was measured on radiographs acquired during rest and active isometric abduction and adduction tasks with the arm alongside the body. Rest AH was 7.5 mm (SD = 1.53); during abduction and adduction, it decreased to 2.1 mm (95 % CI 1.28–3.01, p < 0.001) and 1.1 mm (95 % CI 0.46–1.65, p = 0.001), respectively. Cranial translation during abduction was more severe in shoulders with posterosuperior cuff tears (?AH = 3 mm, SD = 1.5) compared to supraspinatus tears (?AH = 1 mm, SD = 1.6), with a mean difference of 2 mm (95 % CI 0.64–3.58, p = 0.007). Both active isometric abduction and adduction leads to active cranial translation in cuff tear patients. Cranial translation is largest during active abduction. Furthermore, there is significant more cranial translation in posterosuperior cuff tear patients compared to supraspinatus cuff tear patients. Possibly, radiographs combined with active tasks offer new possibilities in diagnosing early-stage rotator cuff tears.     

Differences in distribution of myofiber types between the supraspinatus and infraspinatus muscles of sheep

Background: The m. supraspinatus stabilizes the shoulder joint to bear the body weight, and the m. infraspinatus assists in extension and flexion of the joint in sheep. Postural muscles have many SO myofibers, whereas locomotory muscles have numerous fast-twitch myofibers. In sheep the distribution of myofiber types within the two muscles, necessary for a better understanding of postural function, remains to be clarified. Methods: Muscle samples were removed from the whole transverse sections of the dorsal, middle, and ventral compartments of the m. supraspinatus and m. infraspinatus of sheep. Myofibers were classified into FG, FOG, SO-1, and SO-2 myofibers by histochemical methods. Results: The distribution of SO myofibers changed more greatly in the m. supraspinatus (15.0–99.1%) than in the m. infraspinatus (24.5–62.3%). SO myofibers were concentrated markedly in the caudal and deep regions near the spine and fossa of the scapula in the m. supraspinatus and distributed more in the medial part than in the lateral part in the m. infraspinatus. Such changes were caused by increases in percentage of SO-2 myofibers and not SO-1 myofibers. The craniolateral regions of the m. supraspinatus and the caudolateral regions of the m. infraspinatus had many fast-twitch (FOG plus FG) myofibers suited for rapid extension and flexion of the shoulder joint. Conclusions: The m. supraspinatus has the compartmentalized, deep, and caudal regions occupied by SO myofibers, which seem to be specialized for maintenance of the joint extension. The medial region of the m. infraspinatus may assist in the joint stabilization. © 1995 Wiley-Liss, Inc.     

Surgical anatomy of the radial nerve at the elbow

An anatomical study of the brachial portion of the radial nerve with surgical implications is proposed. Thirty specimens of arm from 20 fresh cadavers (11 male, 9 female) were used to examine the topographical relations of the radial nerve with reference to the following anatomical landmarks: acromion angle, medial and lateral epicondyles, point of division between the lateral and long heads of the triceps brachii, lateral intermuscular septum, site of division of the radial nerve into its superficial and posterior interosseous branches and entry and exit point of the posterior interosseous branch into the supinator muscle. The mean distances between the acromion angle and the medial and lateral levels of crossing the posterior aspect of the humerus were 109 (±11) and 157 (±11) mm, respectively. The mean length and calibre of the nerve in the groove were 59 (±4) and 6 (±1) mm, respectively. The division of the lateral and long heads of the triceps was found at a mean distance of 126 (±13) mm from the acromion angle. The mean distances between the lateral point of crossing the posterior aspect of the humerus and the medial and lateral epicondyles were 125 (±13) and 121 (±13) mm, respectively. The mean distance between the lateral point of crossing the posterior aspect of the humerus and the entry point in the lateral intermuscular septum (LIS) was 29 (±6) mm. The mean distances between the entry point of the nerve in the LIS and the medial and lateral epicondyles were 133 (±14) and 110 (±23) mm, respectively. Our study provides reliable and objective data of surgical anatomy of the radial nerve which should be always kept in mind by surgeons approaching to the surgery of the arm, in order to avoid iatrogenic injuries.     

An anatomical ultrasound study of the long posterior sacro‐iliac ligament

The long posterior sacro‐iliac ligament (LPSL) is directly posterior to the sacro‐iliac joint and a potential source of lower back and pelvic pain. Its sonographic anatomy has not been described in detail. The aim of this study was to define and measure the ligament in healthy young women using ultrasound (US). The LPSL was scanned in 30 healthy women (median age, 22 years; range, 20–34) using a high‐resolution linear transducer (7.5–10 MHz). The ligament was consistently visualized as a hyperechoic laminated linear structure between the posterior superior iliac spine and the lateral aspect of the third transverse sacral tubercle. Its length, thickness, and the angle between it and the posterior superior iliac spine were measured by an experienced sonographer bilaterally in both semiflexed standing and lateral decubitus positions. Four female cadaver pelves (age range, 57–93 years) were also scanned and dissected to validate US observations. In the semiflexed standing position, mean LPSL length was 37.9 ± 2.4 mm, mean thickness 1.57 ± 0.38mm, and median angle 18.5°. There was no statistically significant difference with equivalent values in the lateral decubitus position. Intrarater repeatability was fair to substantial in both positions (intraclass correlation coefficient, 0.39–0.66), improving to moderate to substantial (intraclass correlation coefficient, 0.57–0.80) using the mean of two measurements. There was good overall agreement between LPSL length and thickness in cadavers measured by US and dissection. These findings document the sonographic appearance, length, and thickness of the LPSL and provide useful normative data for understanding potential LPSL pathology, particularly in relation to pregnancy‐related pelvic girdle pain. Clin. Anat. 23:971–977, 2010. © 2010 Wiley‐Liss, Inc.     

Sectional anatomy of the adrenal gland in the coronal plane

To provide practical anatomic data for the imaging diagnosis and surgical treatment of adrenal disease, we investigated the anatomy of the adrenal gland and its relationships to regional structures using 31 sets of serial coronal sections of upper abdomen of Chinese adult cadavers and correlated coronal magnetic resonance (MR) images of ten upper abdomens of adult healthy volunteers and coronal reconstructed multislice spiral computed tomography (MSCT) images of five patients without lesions in the adrenal gland. The adrenal glands were visualized mainly on the successive coronal sections between 18 mm anterior to the posterior margin of inferior vena cava and 24 mm posterior to the posterior margin of inferior vena cava. In general, the left adrenal gland was visualized two sections earlier than the right adrenal gland. On the plane through the anterior parts of bilateral renal hili (A₁₈), the appearance rate of bilateral adrenal glands was 100%, and the maximal measurements of bilateral adrenal glands were visualized. The length, width, thickness of right adrenal body, thickness of medial limb and lateral limb were, respectively, 34.02 ± 2.12 mm, 10.91 ± 0.89 mm, 5.82 ± 0.26 mm, 2.78 ± 0.08 mm, 2.62 ± 0.06 mm, whereas the measurements of left adrenal gland were 28.31 ± 2.46 mm, 18.40 ± 1.06 mm, 6.84 ± 0.24 mm, 3.02 ± 0.08 mm, 2.86 ± 0.07 mm, respectively. The coronal plane has superior advantage in showing the bilateral adrenal glands. The shapes of adrenal glands are various, whereas the range of adrenal thickness is quite narrow. The thickness of adrenal medial and lateral limbs, especially the thickness of lateral limb are useful for the diagnosis of the bilateral adrenocortical disease.     

Anatomic relationship of the radial nerve to the elbow joint: Clinical implications of safe pin placement

The percutaneous placement of lateral distal humeral pins risks injury to the radial nerve. We aimed to provide a reliable and safe parameter for the insertion of lateral distal humeral pins. A secondary aim of this study was to investigate the effect of pin/screw placement in the intended zone of fixation at the lateral distal humerus. We dissected 70 fresh cadaveric upper limbs and the radial nerve was identified and its course followed into the anterior compartment. The point where the radial nerve crosses humerus in mid lateral plane was identified and the distance between this point and lateral epicondyle was measured, as was the maximum trans‐epicondylar distance, along with the olecranon fossa height. Statistical analysis was performed using the Pearson correlation coefficient. The average trans‐epicondylar distance was measured at 62 ± 6 mm (range 52–78 mm), and the average lateral radial nerve height was 102 ± 10 mm (range 75–129 mm). The ratio of the lateral nerve height to the trans‐epicondylar distance was an average of 1.7 ± 0.2 (range 1.4–2.0). The Pearson correlation coefficient between the lateral nerve height and the trans‐epicondylar distance was r = 0.95. A relative dimension, the trans‐epicondylar distance is both reliable and easily accessible to the operating surgeon. The absolute safe zone for pin entry into the lateral distal humerus is that area lying within the caudad 70% of a line, equivalent in length to the patient's own trans‐epicondylar distance, when projected proximally from the lateral epicondyle. Clin. Anat. 22:684–688, 2009. © 2009 Wiley‐Liss, Inc.