Distribution and ecological assessment of heavy metals in surface sediments of the East Lake, China

Concentrations and risk assessment of chromium (Cr), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), lead (Pb), cadmium (Cd) and mercury (Hg) were investigated in 106 samples of surface sediments from the East Lake, China in this study. The mean concentration of Zn was highest among the eight heavy metals (225 mg kg^?1), followed by As (191 mg kg^?1), Cr (145 mg kg^?1), Cu (55 mg kg^?1), Ni (27.1 mg kg^?1), Pb (7.93 mg kg^?1), Cd (0.94 mg kg^?1) and Hg (0.21 mg kg^?1). Niuchao Hu was less polluted by heavy metals compare to the other four lakelets of the East Lake. The correlations among these heavy metals and the results of principal component analysis indicated that the distribution of Cd, Pb and Hg was related to anthropogenic activities, whereas Cu, As and Cr were affected by the parent rocks. Zinc and Ni were influenced both by anthropogenic activities and parent rocks. Based on the Sediment Quality Guidelines, the results of toxicity assessment indicated that adverse effects caused by Cr and As would be expected frequently. Nickel, Zn, Cd and Hg may cause adverse effects occasionally and Cu and Pb may cause toxicity infrequently. Arsenic was found to have the highest acute toxicity by toxic units (TUs), followed by Cr, Ni, Zn, Hg, Cu, Cd and Pb. The potential ecological risk index analysis indicated that As, Cd and Hg had considerable or high ecological risk, whereas Cr, Ni, Cu, Zn and Pb had low ecological risk. The potential ecological risk index (RI) of the heavy metals in the surface sediments of East Lake was 483, indicating considerable ecological risk. Close attention should be paid to pollution of the heavy metals in East Lake, China.     

Ecological risk of heavy metals in sediments of the Luan River source water

Distribution and characteristics of heavy metals enrichment in sediment were surveyed including the bio-available form analyzed for assessment of the Luan River source water quality. The approaches of sediment quality guidelines (SQG), risk assessment code and Hakanson potential ecological risk index were used for the ecological risk assessment. According to SQG, The results show that in animal bodies, Hg at the sampling site of Wuliehexia was 1.39 mg/kg, Cr at Sandaohezi was 152.37 mg/kg and Cu at Hanjiaying was 178.61 mg/kg exceeding the severe effect screening level. There were 90% of sampling sites of Cr and Pb and 50% sites of Cu exceeded the lowest effect screening level. At Boluonuo and Wuliehexia, the exchangeable and carbonate fractions for above 50% of sites were at high risk levels and that for above 30% of sites at Xiahenan and Wulieheshang were also at high risk levels. Other sites were at medium risk level. Compared to soil background values of China, Hg and Cd showed very strong ecological risk, and the seven heavy metals of Hg, Cd, Cu, As, Pb, Cr, Zn at ecological risk levels were in the descending order. The results could give insight into risk assessment of environmental pollution and decision-making for water source security.     

Potential ecological risk of heavy metals and metalloid in the sediments of Wuyuer River basin,Heilongjiang Province,China

The spatial distribution, sources, and potential ecological risk of heavy metals and metalloid were evaluated in sediments of the Wuyuer River and its tributaries. Metal and metalloid concentrations and chemical speciation (Cr, Cu, Ni, Pb, Cd, As, Zn and Hg) in 187 surface sediment samples were measured using inductively coupled plasma mass spectrometry. Metals and metalloid in the sediments of the Wuyuer River were greater than the background values of the Songnen Plain, and mean heavy metal concentrations were greater in downstream segments of the river than in upstream segments. Speciation results indicated that Cd was chemically mobile and Cu, Pb, Zn, Cr, and Ni were potentially bioavailable. Mercury and As existed mainly in the residual fraction. Hakanson’s potential risk index indicated that the total potential ecological risk of these elements was moderate in the Wuyuer River. Among the selected metals and metalloid, Hg and Cd were the most potentially toxic and mainly distributed near the cities of Keshan, Yi’an and Fuyü. Because the speciation of Cd in the river sediments is highly bioavailable, the concentrations of Cd should be closely monitored. This research provides managers with information needed to better regulate the environment of the Wuyuer River.     

Comparison of Eleven Heavy Metals in Moringa Oleifera Lam. Products

Eleven heavy metals in various products of Moringa oleifera were analyzed to determine eleven heavy metals (Al, As, Cd, Cr, Cu, Fe, Pb, Mn, Hg, Ni, and Zn) using Inductively Coupled Plasma-Mass Spectrometry. The products of M. oleifera were purchased in Nakhon Pathom, Thailand. All products were digested with nitric acid solution before determining the concentrations of heavy metals. The recoveries of all heavy metals were found to be in the range of 99.89-103.05%. Several criteria such as linearity, limits of detection, limits of quantification, specificity, precision under repeatability conditions and intermediate precision reproducibility were evaluated. Results indicate that this method could be used in the laboratory for determination of eleven heavy metals in M. oleifera products with acceptable analytical performance. The results of analysis showed that the highest concentrations of As, Cr, Hg, and Mn were found in tea leaves while the highest concentrations of Al, Cd, Cu, Fe, Ni, Pb, and Zn were found in leaf capsules. Continuous monitoring of heavy metals in M. oleifera products is crucial for consumer health.     

Speciation and distribution characteristics of heavy metals and pollution assessments in the sediments of Nashina Lake,Heilongjiang, China

Sediment core samples from Nashina Lake, Heilongjiang, China were collected using a gravity sampler. The cores were sliced horizontally at 1 cm each to determine the particle size, total concentrations and speciation of Cd, Cr, Cu, Mn, Ni, Pb, and Zn. Total concentrations of heavy metals were extracted using an acid mixture (containing hydro fluoric acid, nitric acid, and sulphuric acid) and analyzed using an inductively coupled plasma spectrometry. A sequential extraction procedure was employed to separate chemical species. Analysis of results indicate that the concentrations of heavy metals in the sediments of Nashina Lake in descending order are Mn, Cr, Zn, Pb, Ni, Cu, and Cd. The ratios of the average concentrations of four heavy metals (e.g.Cr, Cu, Ni, Zn) to their background values were >1; and those of Mn, Cd, and Pb were >1. Moreover, some toxic metals were mainly distributed in bioavailable fractions. For instance, both Cd and Mn were typically found in Acid-extractable species or Fe–Mn oxide species, and thus can be easily remobilized and enter the food chain. Finally, the analysis of geo-accumulation index showed that anthropogenic pollution levels of Cr, Cu, Mn, Ni, Zn were low, but those of Pb and Cd were at the moderate level. As both Pb and Cd are toxic metals, it is highly necessary to prohibit their transformation and accumulation in the sediments.     

Using an Integrated Approach to Assess the Sediment Quality of an Mediterranean Lagoon,the Bizerte Lagoon (Tunisia)

The present study investigates the quality of surface sediments from the Bizerte lagoon (North Tunisia) using an integrated approach including chemical contaminant analysis, bioassays and sediment quality guidelines (SQGs). Sediment samples were collected at 9 sites and analyzed for eight heavy metals (Hg, Cd, Cr, Cu, Pb, Zn, Ni, Fe and Mn). PAHs, PCBs, OCPs were measured previously in the same sediment samples. Our results indicated that the highest concentrations of metals were found near urban areas due to the municipial and industrial wastewater discharges. Sediment pollution assessment was carried out using geoaccumulation index and enrichment factor, which indicate a widespread pollution by Cd, Pb, Ni and Zn in the studied sediments. For bioassays, aqueous and organic extracts were used to assess toxicity and genotoxicity in sediments by using Microtox^® and SOS Chromotest, respectively. Toxicity levels were compared to metallic and organic pollutants contents. Our results highlight differences in the pattern of responses between the different assays and show no correlation with all the studied contaminants, emphasizing the influence of other contaminants not analyzed in the present study. Based on SQGs, the results of toxicity assessment indicated that adverse effects caused by Ni and Zn would be expected frequently. Nickel was found to have the highest predicted acute toxicity, followed by Zn, Pb, Cd, Cu and Cr. There was no significant relationship between sediment toxicity calculated from heavy metal concentrations (SQG approach) and those measured with bioassays. These findings support the use of integrated approachs for evaluating the environmental risks of sediments.     

Relative in vitro affinity of hepatic metallothionein for metals

The ability of selected metals (Ag, Al, As, Ca, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Tl and V) to displace Zn from Zn-metallothionein (Zn-MT) was quantitated. Of the metals tested Cd had the highest affinity for MT, with 1.33 microM displacing 50% of the 65Zn bound to MT (EC50), followed by Pb (1.46 microM), Cu (1.93 microM), Hg (3.93 microM), Zn (8.06 microM), Ag (10.4 microM), Ni (474 microM) and Co (880 microM). As, Ca and Mo had a limited ability to displace Zn from MT while Al, Cr, Fe, Mg, Mn, Tl and V had no effect on Zn binding even at 1.0 mM.     

Combined toxicity of heavy metal mixtures in liver cells

With rapid industrialization, China is now facing great challenges in heavy metal contamination in the environment. Human exposure to heavy metals through air, water and food commonly involves a mixture consisting of multiple heavy metals. In this study, eight common heavy metals (Pb, Cd, Hg, Cu, Zn, Mn, Cr, Ni) that cause environmental contamination were selected to investigate the combined toxicity of different heavy metal mixtures in HL7702 cells. Toxicity (24 h LC₅₀) of each individual metal on the cells ranked Hg > Cr = Cd > Cu > Zn > Ni > Mn > Pb; toxicity of the different mixtures ranked: M5 > M3PbHgCd > M5+Mn > M5+Cu > M2CdNi > M4A > M8‐Mn > M8 > M5+Zn > M4B > M8‐Cr > M8‐Zn > M8‐Cu > M8‐Pb > M8‐Cd > M8‐Hg > M8‐Ni > M3PbHgNi > M3CuZnMn. The cytotoxicity data of individual metals were successfully used to build the additive models of two‐ to eight‐component metal mixtures. The comparison between additive model and combination model or partly additive model was useful to evaluate the combined effects in mixture. Synergistic, antagonistic or additive effects of the toxicity were observed in different mixtures. These results suggest that the combined effects should be considered in the risk assessment of heavy metal co‐exposure, and more comprehensive investigations on the combined effects of different heavy metal mixtures are needed in the future. Copyright © 2016 John Wiley & Sons, Ltd.     

Multivariate analysis combined with GIS to source identification of heavy metals in soils around an abandoned industrial area,Eastern China

Heavy metals in soils polluted by industrial production are a meaningful topic worldwide. The purpose of this study is to understand the pollution status and spatial distribution of heavy metals in soils. The result can help decision-makers apportion possible soil heavy metals sources and formulate effective pollution control policies. In this paper, 155 soil samples (0–20 cm) were collected and analyzed for eight heavy metals (Cd, Hg, As, Cu, Pb, Cr, Zn, and Ni) from an abandoned industrial area of Tong County, located in Jiangsu Province of Eastern China. The multivariate analysis (including I_geo, E_i/RI, EF, PCA, and CA) and geostatistics (GIS) were used to assess the enrichment level and pollution level of soil heavy metals and identify their sources. The results indicated that eight heavy metals in soils had moderate variations, with CVs ranging from 19.63 to 63.34 %. The pollution level of I_geo of soil heavy metals decreased in the order of Cd~Zn > Cu > Hg~As~Pb~Cr~Ni. The enrichment level of soil heavy metals decreased in the order of Cd > Zn > Hg > Cu > Pb > Ni > As > Cr. According to the E_i, except Cd and Hg were in the significant and moderate ecological risk levels respectively, other soil heavy metals were in the clean or light ecological risk levels, the level of potential ecological risk (RI) of the whole industrial area was moderate. Finally, the source identification of soil heavy metals indicated that Cd and Zn were primarily controlled by human activities, and Hg and Cu were controlled by natural and anthropogenic sources, and As, Pb, Cr, and Ni were mainly controlled by soil parent materials.     

Heavy metal concentrations in timberline trees of eastern Tibetan Plateau

Concentrations of 14 heavy metals (Ag, As, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Tl, V, and Zn) in needles, twigs, bark and xylem of spruce and fir collected at the timberline of eight sites along the Hengduan Mountains, eastern Tibetan Plateau, are reported. Twigs had the highest concentration for most of elements, while xylem had the lowest concentration. The connections between elements in twigs were much richer than other organ/tissues. Pb, Ni, As, Sb, Co, Cd, Hg, Cr and Tl which are partly through anthropogenic sources and brought in by monsoon, have been accumulated in twigs and needles by wet or dry deposition in south and east sites where are within or near pollutant sources. Under moderate pollution situation, vegetation are able to adjust the nutrient element (Cu and Zn) cycle rate, thus maintain a stable concentration level. Seldom V, Ag, and Mo are from external anthropogenic sources. Needles and twigs can be used as biomonitors for ecosystem environment when needles can simply distinguish the origin of elements and twigs are more sensitive to extra heavy metal input.     

ICP-AES/ICP-MS测定西藏和河南产藏红花中主要金属元素及重金属含量(英文)

建立了ICP-AES/ICP-MS测定西藏和河南产藏红花中19种元素含量的方法。19种元素包括主要元素Ca、Fe、Mg、P、Sr、Al、Mn、Zn、V、Cr、Se、Co、Ni、Mo和重金属As、Cu、Cd、Hg、Pb。对于所测元素,标准曲线的相关系数>0.9938,方法的相对标准偏差RSD<5.25%。结果表明,ICP-AES/ICP-MS可用于藏红花质量控制,并为西藏和河南产藏红花中元素的含量测定提供了方法。     

Distribution and pollution, toxicity and risk assessment of heavy metals in sediments from urban and rural rivers of the Pearl River delta in southern China

Sediments were collected from the upper, middle and lower reaches of both urban and rural rivers in a typical urbanization zone of the Pearl River delta. Six heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) were analyzed in all sediment samples, and their spatial distribution, pollution levels, toxicity and ecological risk levels were evaluated to compare the characteristics of heavy metal pollution between the two rivers. Our results indicated that the total contents of the six metals in all samples exceeded the soil background value in Guangdong province. Based on the soil quality thresholds of the China SEPA, Cd levels at all sites exceeded class III criteria, and other metals exhibited pollution levels exceeding class II or III criteria at both river sites. According to the sediment quality guidelines of the US EPA, all samples were moderately to heavily polluted by Cr, Cu, Ni, Pb and Zn. Compared to rural river sites, urban river sites exhibited heavier pollution. Almost all sediment samples from both rivers exhibited moderate to serious toxicity to the environment, with higher contributions from Cr and Ni. A “hot area” of heavy metal pollution being observed in the upper and middle reaches of the urban river area, whereas a “hot spot” was identified at a specific site in the middle reach of the rural river. Contrary metal distribution patterns were also observed along typical sediment profiles from urban and rural rivers. However, the potential ecological risk indices of rural river sediments in this study were equal to those of urban river sediments, implying that the ecological health issues of the rivers in the undeveloped rural area should also be addressed. Sediment organic matter and grain size might be important factors influencing the distribution profiles of these heavy metals.     

ICP-MS法测定板蓝根颗粒中重金属及有害元素的含量并分析其来源

目的测定板蓝根颗粒中砷、镉、汞、铅、铬、铜、锰、钼、镍、钯、铂、钒、锇、铑、钌、铱等重金属及有害元素的含量并探究其来源。方法以密闭高压微波消解技术处理样品,采用电感耦合等离子体质谱法以全定量的方式测定As、Cd、Hg、Pb的含量,以半定量的方式测定其余12种重金属及有害元素的含量。结果板蓝根颗粒中As、Cd、Hg和Pb的加样回收率为96.2%～109.5%,RSD低于2.6%,检出限为2.1×10-4～0.017μg.g-1。板蓝根颗粒中除砷含量较高外,其余15种元素含量均远低于限度值。通过测定板蓝根、制剂中间体及板蓝根颗粒中的砷含量,确定成品中的砷来源于板蓝根药材。结论所用方法准确、灵敏、简便,适用于板蓝根颗粒中重金属及有害元素的含量分析。     

微波消解/电感耦合等离子体质谱法测定西洋参重金属及有害元素含量

目的:分析不同产地不同商品规格西洋参中重金属及有害元素的含量,评价西洋参的药用安全性,为其行业标准的制定提供试验依据。方法:采用微波消解/电感耦合等离子体质谱(ICP-MS)法测定了22个不同产地不同规格西洋参中Pb、Cd、Cu、As、Hg的含量,用SPSS16.0软件进行统计分析;并以中国药典2010年版一部限量标准为依据,判断西洋参中重金属及有害元素含量超标情况。结果:建立了不同产地西洋参样品重金属及有害元素分布特征图谱;西洋参中Pb、Cd、Cu、As、Hg的含量均低于中国药典的限量标准;方差分析表明长度对西洋参中Pb、Cd的含量具有显著性影响,单枝质量对Pb、Cd、Cu、As、Hg的含量影响差异不显著。结论:西洋参具有较高的药用安全性,从药用安全性角度为西洋参商品规格标准的修订提供了参考。     

黄连、川白芷中5种重金属的含量测定

目的:建立黄连及其炮制品、川白芷中5种重金属的最大限量标准。方法:采用微波消解法消解样品后,用原子荧光分光光度法测定药材中汞(Hg)、砷(As)的含量,用原子吸收分光光度法测定药材中铅(Pb)、镉(Cd)、铜(Cu)的含量。结果:黄连中除As以外,其余重金属含量均超标;川白芷中除Cu超标外,其余重金属含量均未超标。结论:建议将黄连、川白芷中重金属含量限度规定为:Pb≤5.0μg·g-1、Hg≤0.2μg·g-1、As≤2.0μg·g-1、Cu≤20.0μg·g-1、Cd≤0.3μg·g-1。     

原子吸收分光光度法测定骨碎补药材中的重金属

目的建立原子吸收分光光度法,测定骨碎补药材中的铅、镉、砷、汞、铜重金属含量。方法以原子吸收分光光度法在324.8 nm波长处检测铜含量,在283.3 nm波长处检测铅含量,在228.8 nm波长处检测镉含量;另采用原子荧光光谱法测定砷、汞的含量。结果 10批骨碎补药材中的重金属含量,铜为2.687 5～8.521 7 mg/kg,镉为0.200 6～0.270 8 mg/kg,铅为0.250 4～1.000 mg/kg,汞为0.003 4～0.029 4 mg/kg,砷0.006 6～0.053 3 mg/kg。结论 10批骨碎补样品中重金属含量均符合2005年版《中国药典(一部)》和香港《中成药注册申请手册》中有关重金属标准的规定。     

Assessment of environmental contamination using feathers of Bubulcus ibis L., as a biomonitor of heavy metal pollution, Pakistan

Concentrations of metals such as Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Ni, Pb, and Zn were analyzed in the feathers of cattle egret (Bubulcus ibis) from three breeding colonies in the Punjab province, Pakistan. The mean concentrations of Ca, Cd, Fe, Pb and Mn were significantly different between the three study sites (River Chenab, River Ravi and Rawal Lake Reservoir). The mean concentrations of Ca, Cd, Fe and Mn were significantly greater at the River Chenab heronry and Cr, Co, Zn, and Pb concentrations at the River Ravi heronry. The feathers of cattle egrets collected from the Rawal Lake Reservoir heronry were least contaminated. Multivariate statistical methods viz., Factor Analysis based on Principal Component Analysis (FA/PCA); Hierarchical Cluster analyses (HACA), and Correlation Analyses identified relatively similar associations of metals and their sources of input. Metals such as Ca, Mg, and K were related with natural input from parent rock material whereas trace metals viz., Cu, Cd, Co, Pb, Ni, and Zn were associated mainly with anthropogenic processes. Metals such as Fe, Mn, and Li were either correlated with natural input or with anthropogenic activities. Concentration of heavy metals such as Cd, Pb, and Cr were well above the threshold level that can cause adverse effects in birds and pose menace to the cattle egrets population in Pakistan. The study suggested that the feathers of cattle egret could be used as a bio-monitor of the local heavy metals contamination.     

Effects of various trace metals on the binding of cadmium to rat hepatic metallothionein determined by the Cd/hemoglobin affinity assay

The Cd/hemoglobin affinity assay is finding increasing use as an indicator of metallothionein in a variety of biological tissues. Because the assay relies on the ability of heat-stable proteins to bind Cd, it is important to know the relative affinities of different trace metals to bind to such proteins, relative to Cd. This study examines the ability of 15 trace metals to prevent the binding of Cd to metallothionein using the Cd/hemoglobin affinity assay for metallothionein. Cd, Cu, Hg, and Ag were the only metals tested which significantly inhibited the binding of a fixed concentration (2 microM) of 109Cd to a crude preparation of rat hepatic metallothionein. As, Co, Cr, Fe, Mn, Mo, Ni, Pb, Sn, Th, and Zn had no inhibitory effect at the highest concentrations tested. However, As, Sn, Th, and Zn prevented the precipitation of hemoglobin at relatively low concentrations and, thus, could not be fully tested for inhibitory potency. Cu was the most potent inhibitor, producing more than 90% inhibition at 5 microM, followed by Ag, Hg, and Cd, which produced 76, 72, and 65% inhibition of cadmium binding at 5 microM, respectively. These results suggest that caution should be taken in interpreting metallothionein concentrations obtained by the Cd/hemoglobin affinity assay in tissues which contain relatively a high concentration of Cu, Ag, or Hg, relative to that of Cd.     

市售灵芝孢子粉7种重金属元素含量测定及膳食暴露风险评估

目的 测定市售灵芝孢子粉中铅、镉、砷、汞、铜、铬、镍7种重金属元素的残留量并评估其膳食暴露的健康风险。方法 收集市售灵芝孢子粉(包含中药饮片、保健食品、食品和农产品等不同产品类型)40批次,对7种重金属元素进行检测,采用点评估方法对灵芝孢子粉中7种重金属元素的膳食暴露量进行评估。结果 40批灵芝孢子粉中7种重金属元素检出率均为100%,有8批样品重金属元素超出拟定的限度。重金属元素膳食暴露评估显示消费者食用灵芝孢子粉摄入铬的量存在一定的膳食暴露健康风险。结论 灵芝孢子粉中铅、镉、砷、汞、铜、镍6种重金属元素膳食暴露低于暂定可耐受摄入量,对人体健康产生危害的风险可接受;铬元素膳食暴露的最大值和第95百分位数(P95)值超过暂定可耐受摄入量,存在一定的健康风险。     

微波消解-ICP-MS法测定天舒胶囊中5种重金属元素

目的：使用电感耦合等离子体质谱（ICP-MS）仪,建立天舒胶囊中Cu、As、Pb、Cd、Hg 5种重金属元素的测定方法。方法：样品经过微波消解处理后,采用外标法,以ICP-MS进行测定。结果：各元素线性关系良好（r＞0.9990）,最低检测限为（0.0014~0.8237）μg·L-1,回收率为98.4%~114.1%。结论：该方法准确、简便、快速、灵敏,适用于天舒胶囊内容物中重金属的含量测定。