WITHDRAWN: 5-Fluorouracil-loaded iron/ethylcellulose (core/shell) nanoparticles for active targeting of cancer

Even though 5-fluorouracil has been demonstrated to display antitumor activity against a wide variety of cancers, it is needed to be administered at high doses to elicit the required therapeutic activity, simultaneously leading to severe side effects. We hypothesized that the efficient delivery of 5-fluorouracil to tumors using a magnetic colloid could reduce the dose required to bring out sufficient therapeutic response. Thus, we have formulated a 5-fluorouracil-loaded magnetic nanomedicine consisting of a magnetic core (iron) and a biocompatible polymeric shell (ethylcellulose), suitable for parenteral administration. These core/shell nanoparticles were synthesized by an emulsion solvent evaporation process. Two drug loading methods were analyzed: the first one based on 5-fluorouracil surface adsorption onto the preformed nanoparticles, and the second method being drug addition prior to the emulsion solvent evaporation process leading to drug entrapment into the polymeric network. 5-Fluorouracil entrapment into the polymeric matrix yielded a higher drug loading and a slower drug release profile as compared with drug adsorption. Finally, as a proof of concept, Prussian blue staining has demonstrated the considerable accumulation of these magnetically guided composite nanoparticles in the tumors, suggesting the potential of this stimuli-sensitive drug carrier for the efficient treatment of cancer by active targeting.     

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs accross barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.     

A 5-fluorouracil-loaded pH-responsive dendrimer nanocarrier for tumor targeting

A novel long-circulating and pH-responsive dendrimer nanocarrier was prepared for delivering 5-fluorouracil (5-FU) to tumors through the targeting of nanoparticles to the low pH environment of tumors. The nanocarrier, poly(2-(N,N-diethylamino)ethyl methacrylate) with methoxy-poly(ethylene glycol)-poly(amidoamine) (PPD), had a core-shell structure with 4.0 G poly(amidoamine) (PAMAM) as the core and parallel poly(2-(N,N-diethylamino)ethyl methacrylate) (PDEA) chains and methoxy-poly(ethylene glycol) (mPEG) chains as the shell. The PDEA chain was pH-responsive, and the PEG chains led to long circulation in blood vessels to achieve tumor targeting. The sizes, drug encapsulation and release of PPD nanocarriers showed high pH-dependency due to the PDEA chains, as they were hydrophilic at pH 6.5 and hydrophobic at pH 7.4. The encapsulation efficiency of 5-FU in PPD nanocarriers was as high as 92.5% through the pH transition. The release of 5-FU from PPD nanocarriers was much faster at pH 6.5 than at pH 7.4. The 5-FU-loaded nanocarrier had a long half-life after intravenous administration in mice and showed high tumor targeting. This nanocarrier composite also showed enhanced anticancer effects. PPD is a promising nanocarrier of anticancer drugs with high encapsulation, tumor targeting and pH-responsive release in tumors.     

Imprinted hydrophilic nanospheres as drug delivery systems for 5-fluorouracil sustained release

Molecularly imprinted hydrogel nanospheres as devices for the controlled/sustained release of 5-fluororacil in biological fluids were synthesized employing one-pot precipitation technique as the polymerization method. Methacrylic acid as a functional monomer and ethylene glycole dimethacrylate as a cross-linker were used in polymeric feed. Morphological and hydrophilic properties were determined by scanning electron microscopy and water content measurement, and recognition and selectivity properties of spherical molecularly imprinted polymers were compared with the spherical non-imprinted polymers, both in organic (acetonitrile) and water media. Finally, in vitro release studies were performed in plasma simulating fluids.     

Nanostructured poly(l-lactide) matrix as novel platform for drug delivery

With the aim to establish new strategies for fabricating bioactive nanostructured matrices for controlled drug delivery or potential tissue engineering, a facile and one-pot protocol was developed in this study to produce drug-loaded poly(l-lactide) (PLLA) nanostructures by thermally induced phase separation. Using both steroidal and nonsteroidal anti-inflammatory drugs, we demonstrated that lipophilic drugs can be efficiently incorporated in either nanosheet-like or nanofibrous PLLA matrices. Thus entrapped drug was randomly distributed in the interconnected nanostructures in the form of nanoscaled crystals. In vitro release study revealed that drug release kinetics may be modulated, on the one hand, by the nanostructure of matrices, while on the other hand by the polymer concentration utilized for fabrication. As for hydrophilic compounds, they could be conveniently loaded into nanofibrous structure by post-fabrication absorption. In addition to the conceptual proof of potential applications of nanostructured PLLA matrices for controlled drug delivery, the strategy employed herein offers a new way to construct bioactive scaffolds, such as antibacterial or anti-inflammatory scaffolds, which may find broad applications for tissue regeneration and stem cells-based biotherapy.     

Clonazepam release from core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) triblock copolymers

The triblock copolymer based on poly(-caprolactone) (PCL) as hydrophobic part and poly(ethylene glycol) (PEG) as hydrophilic one was synthesized and characterized. Core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) (CEC) block copolymer were prepared by a dialysis technique. According to the amphiphilic characters, CEC block copolymer can self-associate at certain concentration and their critical association concentration (CAC) was determined by fluorescence probe technique. CAC value of the CEC-2 block copolymer was evaluated as 0.0030 g/l. CAC values of CEC block copolymer decreased with the increase of PCL chain length, i.e. the shorter the PCL chain length, the higher the CAC values. From the observation of transmission electron microscopy (TEM), the morphologies of CEC-2 core-shell type nanoparticles were spherical shapes. Particle size of CEC-2 nanoparticles was 32.3±17.3 nm as a monomodal and narrow distribution. Particle size, drug loading, and drug release rate of CEC-2 nanoparticles were changed by the initial solvents and the molecular weight of CEC. The degradation behavior of CEC-2 nanoparticles was observed by ¹H NMR spectroscopy. It was suggested that clonazepam (CNZ) release kinetics were dominantly governed by diffusion mechanism.     

Clonazepam release from poly(DL-lactide-co-glycolide) nanoparticles prepared by dialysis method

Aim of this work is to prepare poly(DL-lactide-co-glycolide) (PLGA) nanoparticles by dialysis method without surfactant and to investigate drug loading capacity and drug release. The size of PLGA nanoparticles was 269.9±118.7 nm in intensity average and the morphology of PLGA nanoparticles was spherical shape from the observation of SEM and TEM. In the effect of drug loading contents on the particle size distribution, PLGA nanoparticles were monomodal pattern with narrow size distribution in the empty and lower drug loading nanoparticles whereas bi- or trimodal pattern was showed in the higher drug loading ones. Release of clonazepam from PLGA nanoparticles with higher drug loading contents was slower than that with lower loading contents.     

Thermo-responsive shell cross-linked PMMA-b-P(NIPAAm-co-NAS) micelles for drug delivery

Thermo-responsive amphiphilic poly(methyl methacrylate)-b-poly(N-isopropylacrylamide-co-N-acryloxysuccinimide) (PMMA-b-P(NIPAAm-co-NAS)) block copolymer was synthesized by successive RAFT polymerizations. The uncross-linked micelles were facilely prepared by directly dissolving the block copolymer in an aqueous medium, and the shell cross-linked (SCL) micelles were further fabricated by the addition of ethylenediamine as a di-functional cross-linker into the micellar solution. Optical absorption measurements showed that the LCST of uncross-linked and cross-linked micelles was 31.0 °C and 40.8 °C, respectively. Transmission electron microscopy (TEM) showed that both uncross-linked and cross-linked micelles exhibited well-defined spherical shape in aqueous phase at room temperature, while the SCL micelles were able to retain the spherical shape with relatively smaller dimension even at 40 °C due to the cross-linked structure. In vitro drug release study demonstrated a slower and more sustained drug release behavior from the SCL micelles at high temperature as compared with the release profile of uncross-linked micelles, indicating the great potential of SCL micelles developed herein as novel smart carriers for controlled drug release.     

Freeze-drying of liposomes using tertiary butyl alcohol/water cosolvent systems

Polyacrylamide (pAAm) particles crosslinked with N,N-methylenebis-acrylamide/ethylene glycol dimethacrylate (NNMBA/EGDMA) have been prepared in water–methanol medium by the dispersion polymerization using poly(vinyl pyrrolidone), PVP as a steric stabilizer. 5-fluorouracil an anticancer drug, has been loaded in situ into the crosslinked pAAm particles. Plain as well as drug loaded microparticles have been characterized by differential scanning calorimetry (DSC) and X-ray diffraction studies (XRD) and scanning electron microscopy (SEM). DSC and XRD studies have indicated a molecular level dispersion of the drug in pAAm particles during in situ loading and SEM pictures have shown the formation of spherical and oval-shaped particles. In vitro release of 5-fluorouracil from the crosslinked pAAm particles has been carried out in 7.4 pH buffer medium. Both encapsulation efficiency and release patterns are found to depend on the nature of the crosslinking agent, amount of crosslinking agent used and the amount of drug loaded. In vitro release studies indicated the controlled release of 5-fluorouracil up to 12 h.     

5-Fluorouracil shell-enriched solid lipid nanoparticles (SLN) for effective skin carcinoma treatment

Context: The effective treatment of skin carcinoma is warranted for targeting the chemotherapeutic agents into tumor cells and avoiding unwanted systemic absorption.

Objective: This work was dedicated to the purpose of engineering highly penetrating shell-enriched nanoparticles that were loaded with a hydrophilic chemotherapeutic agent, 5-fluorouracil (5-FU).

Methods: Varying ratios of lecithin and poloxamer188 were used to produce shell-enriched nanoparticles by enabling the formation of reversed micelles within this region of the SLN. The localization of 5-FU within the shell region of the SLN, was confirmed using 5-FU nanogold particles as a tracer. SLN were introduced within sodium carboxy methylcellulose hydrogel, and then applied onto the skin of mice-bearing Ehrlich’s ascites carcinoma. The mice were treated with the gel twice daily for 6 weeks.

Results: The transmission electron microscope (TEM) revealed the formation of uniform nanoparticles, which captured reversed micelles within their shell region. The SLNs’ had particle size that ranged from 137?±?5.5?nm to 800?±?53.6, zeta potential of ?19.70?±?0.40?mV and entrapment efficiency of 47.92?±?2.34%. The diffusion of the drug-loaded SLN (269.37?±?10.92?μg/cm²) was doubled when compared with the free drug (122?±?3.09?μg/cm²) when both diffused through a hydrophobic membrane. SLN-treated mice exhibited reduced inflammatory reactions, with reduced degrees of keratosis, in addition to reduced symptoms of angiogenesis compared to 5-FU-treated mice.

Conclusion: SLN possesses the capacity to be manipulated to entrap and release hydrophilic antitumor drugs with ease.     

Nanoporous multilayer poly(L-glutamic acid)/chitosan microcapsules for drug delivery

Nanoporous poly(L-glutamic acid)/chitosan (PLGA/CS) multilayer microcapsules were fabricated by layer-by-layer (LbL) assembly using the porous silica particles as sacrificial templates. The LbL assembled nanoporous PLGA/CS microcapsules were characterized by Zeta-potential analyzer, FTIR, TGA, SEM, TEM and CLSM. 5-Fluorouracil (5-FU) was chosen as model drug. The drug loading content of PLGA/CS microcapsules depends on loading time, loading temperature, pH value and NaCl concentration. High loading capacity of microcapsules can be achieved by simply adjusting pH value and salt concentration. Moreover, 5-Fu loaded microcapsules take on a sustained release behavior, especially in an acid solution, in contrast to burst release of bare 5-Fu. The kinetics of 5-Fu release from PLGA/CS microcapsules conforms to Korsmeyer-Peppas and Baker-Lonsdale models, the mechanism of which can be ascribed to priority of drug diffusion and subordination of polymer degradation. The MTT cytotoxicity assay in vitro reveals the satisfactory anticancer activity of the drug-loaded PLGA/CS microcapsules. Therefore, the novel nanoporous PLGA/CS microcapsules is expected to find application in drug delivery systems.     

Photocrosslinked poly(ester anhydride)s for peptide delivery: Effect of oligomer hydrophobicity on PYY3-36 delivery

The treatment for many diseases can be improved by developing more efficient peptide delivery technologies, for example, biodegradable polymers. In this work, photocrosslinked poly(ester anhydride)s based on functionalized poly(ε-caprolactone) oligomers were investigated for their abilities to achieve controlled peptide delivery. The effect of oligomer hydrophobicity on erosion and peptide release from poly(ester anhydride)s was evaluated by developing a sustained subcutaneous delivery system for an antiobesity drug candidate, peptide YY3-36 (PYY3-36). Oligomer hydrophobicity was modified with alkenylsuccinic anhydrides containing a 12-carbon alkenyl chain. PYY3-36 was mixed as a solid powder with methacrylated poly(ester anhydride) precursors, and this mixture was photocrosslinked at room temperature to form an implant for subcutaneous administration in rats. The oligomer hydrophobicity controlled the polymer erosion and PYY3-36 release as the increased hydrophobicity via the alkenyl chain prolonged polymer erosion in vitro and sustained in vivo release of PYY3-36. In addition, photocrosslinked poly(ester anhydride)s increased the bioavailability of PYY3-36 by up to 20-fold in comparison with subcutaneous administration of solution, evidence of remarkably improved delivery. In conclusion, this work demonstrates the suitability of photocrosslinked poly(ester anhydride)s for use in peptide delivery.     

Genipin crosslinked curcumin loaded chitosan/montmorillonite K-10 (MMT) nanoparticles for controlled drug delivery applications

Abstract

Here, we have reported the influence of MMT and genipin in releasing curcumin from the Genipin crosslinked Chitosan/MMT nanoparticles, prepared by ionic gelation method. The nanoparticles were characterised using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffractometry (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). Zeta potential and average diameter of the nanoparticles were found in the range 32–47?mV and 430–560?nm. Swelling and release of curcumin from the nanoparticles increased with the decrease in pH of the medium, MMT, and genipin content. Curcumin released from the nanoparticles reduced the viability of MCF-7 and Hep G2 cells as compared to untreated cells. The nanoparticles increased the level of reduced glutathione (GSH), superoxide dismutase (SOD), and catalase level in human PBMCs and decreased the level of Lipid peroxidation suggesting an enhanced protection against cellular damage. Lower pH and higher MMT concentration in the nanoparticles improved the mucoadhesive properties.     

Degradable poly(amido amine)s as gene delivery carriers

Introduction: In recent years, there has been a great deal of interest in the development of vectors which are being developed based on the capacity of polymers to mediate appropriate interactions with the cellular environment, or to interface with specific cellular processes. Several such vectors have been synthesized, resulting in biomacromolecules with low cytotoxicity and higher gene delivery ability.

Areas covered: This review briefly describes the recent success of poly(amido amine)s (PAAs) as non-viral vectors, and highlights their promising future in the development of nucleic acid-based therapy. It also provides an overview on the synthesis, characterization and application of PAAs as gene carriers, which will be useful for various biological motifs. This review helps the readers to better understand the emergence of non-viral vectors for gene therapy, especially PAAs, their properties, their advantages and disadvantages and the gene therapy based on them.

Expert opinion: The future of gene-based therapy needs to identify approaches to develop new carriers, depending on the properties of the biological membranes they face, and their physicochemical properties, in order to successfully deliver the genes to the target sites. With the emergence of a variety of non-viral vectors, such as biodegradable polymers, it may not take long before non-viral vectors are observed that are not just safe and tissue-specific, but even more efficient than viral vectors.     

5-Fluorouracil-loaded microspheres prepared by spray-drying poly(D,L-lactide) and poly(lactide-co-glycolide) polymers: Characterization and drug release

5-Fluorouracil (5-FU), a hydrosoluble anti-neoplastic drug, was encapsulated in microspheres of poly(D,L-lactide) (PLA) and poly(lactide-co-glycolide) (PLGA) polymers using the spray-drying technique, in order to obtain small size microspheres with a significant drug entrapment efficiency. Drug-loaded microspheres included between 47?±?11 and 67?±?12?µg 5-FU?mg^?1 microspheres and the percentage of entrapment efficiency was between 52?±?12 and 74?±?13. Microspheres were of small size (average diameter: 0.9?±?0.4–1.4?±?0.8?µm microspheres without drug; 1.1?±?0.5–1.7?±?0.9?µm 5-FU-loaded microspheres) and their surface was smooth and slightly porous, some hollows or deformations were observed in microspheres prepared from polymers with larger T_g. A fractionation process of the raw polymer during the formation of microspheres was observed as an increase of the average molecular weight and also of T_g of the polymer of the microspheres. The presence of 5-FU did not modify the T_g values of the microspheres. Significant interactions between the drug and each one of the polymers did not take place and total release of the included drug was observed in all cases. The time needed for the total drug release (28–129?h) was in the order PLA?>?PLGA 75/25?>?PLGA 50/50. A burst effect (17–20%) was observed during the first hour and then a period of constant release rate (3.52?±?0.82–1.46?±?0.26?µg 5-FU?h^?1 per milligram of microspheres) up to 8 or 13?h, depending on the polymer, was obtained.     

Layer-by-layer assembly of poly(l-glutamic acid)/chitosan microcapsules for high loading and sustained release of 5-fluorouracil

Hollow polyelectrolyte microcapsules based on poly(l-glutamic acid) (PLGA) and chitosan (CS) with opposite charges were fabricated by layer-by-layer (LbL) assembly technique using melamine formaldehyde (MF) microparticles as sacrificial templates. The LbL assembly of polyelectrolytes and the resultant PLGA/CS microcapsules were characterized. A hydrophilic anticancer drug, 5-fluorouracil (5-FU), was chosen to investigate the loading and release properties of the microcapsules. The PLGA/CS microcapsules show high loading capacity of 5-FU under conditions of high drug concentration and salt adding. The high loading can be ascribed to spontaneous deposition of 5-FU induced by hydrogen bonding between 5-FU and PLGA/CS microcapsules. The PLGA/CS microcapsules show sustained release behavior. The release rate of 5-FU drastically slows down after loading in PLGA/CS microcapsules. The 5-FU release from PLGA/CS microcapsules can be best described using Ritger-Peppas or Baker-Londale models, indicating the diffusion mechanism of 5-FU release from the PLGA/CS microcapsules. In vitro cytotoxicity evaluation by the MTT assay shows good cell viability over the entire concentration range of PLGA/CS microcapsules. Therefore, the novel PLGA/CS microcapsules are expected to find application in drug delivery systems because of the properties of biodegradability, high loading, sustained release and cell compatibility.     

一阶导数光谱法测定聚丙交酯微球中5-氟尿嘧啶或醋酸地塞米松的含量

二氯甲烷-无水乙醇混合溶剂溶解聚丙交酯微球,一阶导数紫外分光光度法测定5-氟尿嘧啶或醋酸地塞米松的含量。以一阶导数光谱5-氟尿嘧啶277nm和醋酸地塞米松266nm波长处的零谷距作为定量指标,线性关系良好,测定方法简便、快捷、准确。     

Novel,dynamic on-line analytical separation system for dissolution of drugs from poly(lactic acid) nanoparticles

A novel method for investigating drug release in a dynamic manner from nanoparticles including, but not limited to, biodegradable poly(lactic acid) (PLA) is reported. The PLA nanoparticles were prepared by the nanoprecipitation method. Two poorly soluble drugs, beclomethasone dipropionate (BDP) and indomethacin, were encapsulated into PLA nanoparticles, and their dissolution from the nanoparticles were followed in a dynamic way. The on-line method comprised a short column (vessel) packed with the PLA nanoparticles, on-line connected to an analytical liquid chromatographic column via a multiport switching valve equipped with two loops. The system allowed monitoring of the drug release profiles in real time, and the conditions for the drug release could be precisely controlled and easily changed. The effects of solvent composition and temperature on the rate of dissolution of the drugs from the PLA nanoparticles were investigated. The system proved to be linear for the drugs tested over the concentration range 10–3000 ng (n = 6, R² = 0.999 and 0.997 for indomethacin and beclomethasone, respectively) and repeatable (RSD of peak areas <0.5%). The recoveries of the dissolution study were quantitative (120 and 103% for indomethacin and beclomethasone, respectively).     

Synthesis and preliminary evaluation of poly(amidoamine)-melittin conjugates as endosomolytic polymers and/or potential anticancer therapeutics

The pH-responsive poly(amidoamine)s (PAAs) have been previously described. Whereas ISA23 enhances transfection in vitro and ISA1 promotes the cytosolic delivery of the non-permeant toxins this process shows poor efficiency. The aim of this study was to prepare and evaluate PAA conjugates containing the membrane disrupting peptide melittin (MLT). It was hypothesised that PAA conjugation would reduce the haemolytic activity of MLT at pH 7.4, however, upon delivery to tumours by the EPR effect, the polymer would uncoil in an acidic environment exposing MLT and allowing it to interact with membranes. PAA–MLT conjugates were prepared using MLT as a comonomer together with bis-acryloylpiperazine, 2-methylpiperazine and bis-hydroxyethylethylenediamine (ISA1-like), or bis-acrylamidoacetic acid and 2-methylpiperazine (ISA23-like). The melittin content of the conjugates was 6–19% (w/w). Although ISA1–MLT improved gelonin delivery compared to the parent polymer ISA1 ( 13-fold increase) and showed pH-dependent haemolytic activity at a polymer concentration of 0.05 mg/ml, this conjugate also displayed high haemolytic activity at pH 7.4. In contrast, ISA23–MLT like the parent compound ISA23 did not deliver gelonin. However, this conjugate could have potential as a novel polymeric anticancer conjugate due to its lack of haemolytic activity at pH 7.4 and retention of cytotoxicity.     

Recent development of poly(ethylene glycol)-cholesterol conjugates as drug delivery systems

Poly(ethylene glycol)-cholesterol (PEG-Chol) conjugates are composed of “hydrophilically-flexible” PEG and “hydrophobically-rigid” Chol molecules. PEG-Chol conjugates are capable of forming micelles through molecular self-assembly and they are also used extensively for the PEGylation of drug delivery systems (DDS). The PEGylated DDS have been shown to display optimized physical stability properties in vitro and longer half-lives in vivo when compared with non-PEGylated DDS. Cell uptake studies have indicated that PEG-Chol conjugates are internalized via clathrin-independent pathways into endosomes and Golgi apparatus. Acid-labile PEG-Chol conjugates are also able to promote the content release of PEGylated DDS when triggered by dePEGylation at acidic conditions. More importantly, biodegradable PEG-Chol molecules have been shown to decrease the “accelerated blood clearance” phenomenon of PEG-DSPE. Ligands, peptides or antibodies which have been modified with PEG-Chols are oftentimes used to formulate active targeting DDS, which have been shown in many systems recently to enhance the efficacy and lower the adverse effects of drugs. Production of PEG-Chol is simple and efficient, and production costs are relatively low. In conclusion, PEG-Chol conjugates appear to be very promising multifunctional biomaterials for many uses in the biomedical sciences and pharmaceutical industries.