Rehabilitation of irradiated patients with chemically modified and conventional SLA implants: five‐year follow‐up

The aim of this study is to evaluate the clinical and radiological parameters of standard SLA surface implants compared to chemically modified hydrophilic SLActive implants in irradiated patients after the initial 12‐month loading period up to 5 years. Twenty patients with a mean age of 61·1 years were treated with dental implants after ablative surgery and radio‐chemotherapy of oral cancer. All patients were non‐smokers. The placement of 102 implants (50 SLA, 52 SLActive) was performed bilaterally according to a split‐mouth design. Mean crestal bone changes were evaluated using standardised orthopantomographies and clinical parameters. Data were analysed using a Kaplan–Meier curve, Mann–Whitney U‐test and two‐factorial non‐parametric analysis. The average observation period was 60 months. The amount of bone loss at the implant shoulder of SLA implants was mesial and distal 0·7 mm. The SLActive implants displayed a bone loss of mesial 0·6 mm as well as distal 0·7 mm after 5 years. Two SLA implants were lost before loading. One patient lost five implants due to recurrence of a tumour. The overall cumulative 12‐month, 3‐year and 5‐year survival rate of SLA implants was 92%, 80% and 75·8% and of SLActive implants 94·2%, 78·8% and 74·4%, respectively. Eighteen implants were considered lost because the patients had died. Sandblasted acid‐etched implants with or without a chemically modified surface can be used in irradiated patients with a high predictability of success. Lower implant survival rates in patients with irradiated oral cancer may be associated with systemic effects rather than peri‐implantitis.     

Early loading of sandblasted and acid-etched implants: a randomized-controlled double-blind split-mouth study. Five-year results

OBJECTIVES: The aim of the present split-mouth study is to assess the peri-implant conditions around early-loaded sandblasted and acid-etched (SLA) implants, 5 years after abutment connection and to compare, in the same patients, the results obtained with a standard protocol using identical implants with a TPS surface. MATERIAL AND METHODS: Surgical procedure was performed by the same operator and was identical at test (SLA) and control (TPS) sites, in 32 healthy patients. Abutment connection was carried out at 35 N cm 6 weeks postsurgery for test sites and 12 weeks for the controls. Patients were seen regularly, for control and professional cleaning. At 60 months, clinical measures and radiographic bone changes were recorded by the same operator, blind to the type of surface of the implant, on 27 patients, as five patients were lost to follow-up. RESULTS: A total number of 106 implants were examined. No implant was lost. No significant differences were found with respect to the presence of plaque [modified plaque index (mPI) 0.27+/-0.56 vs. 0.32+/-0.54], bleeding on probing (29% vs. 32%), mean pocket depth (3.2+/-1 vs. 3.2+/-1 mm) or mean marginal bone loss (0.32+/-1.04 vs. 0.44+/-1.12 mm) between test and control. Four implants that presented 'spinning' at the time of abutment connection presented no significant differences from the rest of the test sites. CONCLUSION: The results of this prospective study confirm that SLA implants, under defined conditions, are suitable for early loading at 6 weeks in both the mandible and the maxilla. Limited implant spinning, occasionally found at abutment connection, produces no detrimental effect on the clinical outcome when properly handled.     

Early loading of sandblasted and acid-etched (SLA) implants: a prospective split-mouth comparative study

Sandblasted and acid-etched (SLA) implants were recently introduced to reduce the healing period between surgery and prosthesis. In this split-mouth study, SLA implants were compared to titanium plasma-sprayed (TPS) implants under loaded conditions one year after placement in 32 healthy patients, with comparable bilateral edentulous sites and no discrepancies in the opposing dentition. The surgical procedure was performed by the same operator and was identical at 68 SLA (test) and 68 TPS (control) sites. Tapping was never performed and primary stability was always achieved. Abutment connection was carried out at 35 Ncm 6 weeks postsurgery for test sites and 12 weeks for the controls, by the same dentist blind to the type of surface of the implant. In 4 of the 68 test sites the implant rotated slightly, patients reported minor pain and connection was not completed. Provisional restoration was fabricated and a new tightening was performed after six weeks. Similar gold-ceramic restorations were cemented on the same type of solid abutments on both sites. No implant was lost. Clinical measures and radiographic changes were recorded by the same operator, blind to the type of surface of the implant, 1 year post surgery. No significant differences were found with respect to presence of plaque (24% vs. 27%), bleeding on probing (24% vs. 31%), mean pocket depth (3.3 mm vs. 2.9 mm) or mean marginal bone loss (0.65 mm vs. 0.77 mm). The results suggest that SLA implants are suitable for early loading at 6 weeks. Limited implant spinning may occasionally be found but, if properly handled, it produces no detrimental effect on the clinical outcome.     

Comparison of early telescope loading of non-submerged ITI implants in irradiated and non-irradiated oral cancer patients

OBJECTIVE: To compare early dental implant loading in irradiated and non-irradiated oral cancer patients in order to accelerate masticatory function improvement and quality of life. PATIENTS AND METHODS: One hundred and fourteen non-submerged interforaminal ITI implants were early loaded in 30 patients after 3 weeks in situ (telescoped overdenture). Nineteen patients received 72 implants (63%) after local irradiation; 11 non-irradiated patients received 42 implants (37%) with a 24-month follow-up. RESULTS: At 24 month follow-up, one early failure had occurred in an irradiated patient (=99% functioning implants in situ). Peri-implant bleeding and plaque index were similarly high in both groups (40 to 68% average).The Results of other measured parameters were as follows (values for mean; irradiated; non-irradiated patients with respective standard deviations; significance of comparison): bone loss (0.9+/-0.9; 1.4+/-0.9; 0.4+/-0.5 mM; P<0.01); Periotest score (-2.7+/-2.7; -2.4+/-2.2; -3.1+/-3.3; P<0.2); gingival recession (0.6+/-0.7 mM; 0.8+/-0.9 mM; 0.4+/-0.5 mM, P<0.02); and peri-implant probing depths (3+/-1.2; 2.6+/-0.6; 3.4+/-1.7 mM; P<0.002). CONCLUSION: The results suggest reliable non-submerged implantation and early loading. However, bone loss in irradiated mandibles, combined with higher average Periotest values and gingival recession in an oral environment of altered saliva quantity, quality, microflora and local scarring, requires extended follow-up.     

Early loading of non-submerged titanium implants with a sandblasted and acid-etched surface. 5-year results of a prospective study in partially edentulous patients

OBJECTIVES: The aim of this prospective cohort study was to evaluate the success rate of titanium screw-type implants with the sandblasted and acid-etched (SLA) surface loaded early, after 6 weeks of healing. MATERIAL AND METHODS: A total of 104 implants were inserted into posterior sites of 51 partially edentulous patients exhibiting bone densities of class I-III. After a healing period of 6 weeks, all implants were functionally loaded with cemented crowns or fixed partial dentures. The patients were recalled at 3, 12, 24, 36, 48 and 60 months for clinical and radiographic examination. RESULTS: One implant failed to integrate during healing, and three implants were lost to follow-up and were considered drop-outs. The remaining 100 implants showed favorable clinical and radiographic findings at the 5-year examination. The peri-implant soft tissues were stable over time; the mean probing depths and mean attachment levels did not change during the follow-up period. None of the radiographs exhibited signs of continuous peri-implant radiolucency, which confirmed ankylotic stability for all 100 implants. The measurement of the bone crest levels (DIB values) indicated stability as well. Based on strict success criteria, all 100 implants were considered successfully integrated, resulting in a 5-year success rate of 99%. CONCLUSION: This prospective study using an early loading protocol with 6 weeks of healing demonstrated that titanium implants with the SLA surface can achieve and maintain successful tissue integration with high predictability for at least 5 years of follow-up in selected patients and sites.     

Immediately restored one-piece single-tooth implants with reduced diameter: one-year results of a multi-center study

Objectives: The aim of the present multi‐center study was to evaluate the treatment outcome of immediately restored one‐piece single‐tooth implants with a diameter of 3 mm after 1 year. Material and methods: A total of 57 one‐piece implants (NobelDirect^® 3.0) were inserted in 47 patients (26 females, 21 males) with a mean age of 31 years (range: 17–76 years) at five different centers. The implants replaced maxillary lateral incisors and mandibular incisors. The implants were placed either in conjunction with tooth extraction or in healed sites, and all implants were immediately restored with a provisional resin crown. If needed, the abutment part of the implant was prepared before crown cementation. The permanent crown was placed after 1.9–14.5 months. Radiographs were taken at implant insertion as well as after 6 and 12 months to evaluate the peri‐implant marginal bone level and bone loss. Moreover, plaque, bleeding on probing and complications were assessed. Results: A total of 44 patients (23 females, 21 males) with 54 implants were available for the 1‐year follow‐up. One implant was lost, thus the 1‐year implant survival was 98%. A statistically significant mean marginal bone loss was observed between baseline and 6 months (1.1 mm, range: ?0.7 to 4.4 mm; n=49) and between baseline and 12 months (1.6 mm, range: ?0.8 to 4.6 mm; n=50). A total of 18% of the implants were characterized by a bone loss of more than 3 mm. No bleeding on probing was observed around 83% of the implants. Plaque was registered at 15% of the implants. The most common complications were related to the provisional crown, i.e. fracture (n=3) and loss of retention (n=3). Conclusions: A high 1‐year implant survival was observed in the present study. However, the excessive peri‐implant marginal bone loss around several implants indicates that this implant should be used with caution until further studies have been conducted. To cite this article:
Zembi? A, Johannesen LH, Schou S, Malo P, Reichert T, Farella M, Hämmerle CHF. Immediately restored one‐piece single‐tooth implants with reduced diameter: one‐year results of a multi‐center study.
Clin. Oral Impl. Res. 23 , 2012; 49–54.
doi: 10.1111/j.1600‐0501.2011.02174.x     

Early loading of nonsubmerged titanium implants with a sandblasted and acid-etched (SLA) surface: 3-year results of a prospective study in partially edentulous patients

PURPOSE: The aim of this study was to evaluate the success rate of ITI implants with the SLA surface that were loaded after 6 weeks of healing. MATERIALS AND METHODS: In this prospective cohort study, a total of 104 implants were placed in posterior sites of 51 partially edentulous patients exhibiting bone densities of Class 1, 2, or 3. After a healing period of 6 weeks, all implants were functionally loaded with cemented crowns or fixed partial dentures. The patients were recalled at 3, 12, 24, and 36 months for clinical and radiographic examination. RESULTS: One implant failed to integrate during healing, and 1 implant was lost to follow-up and considered a dropout. The remaining 102 implants showed favorable clinical and radiographic findings and were considered successfully integrated at the 3-year examination. This resulted in a 3-year success rate of 99.03%. DISCUSSION: The peri-implant soft tissues were stable over time, as evidenced by no changes in the mean probing depths and the mean attachment levels during the follow-up period. None of the radiographs exhibited signs of continuous peri-implant radiolucency, which confirmed ankylotic stability of all 102 implants. The radiographic evaluation of the bone level at the implant indicated stability of the bone crest levels. CONCLUSION: The results of this prospective study demonstrated that early loading of ITI implants with the SLA surface after an unloaded healing period of 6 weeks provided successful tissue integration with high predictability, and that successful tissue integration was well maintained up to 3 years of follow-up in this study population.     

Clinical performance of wide-body implants with a sandblasted and acid-etched (SLA) surface: results of a 3-year follow-up study in a referral clinic

PURPOSE: The aim of this study was to evaluate the 3-year success rates of wide-body implants with a regular- or wide-neck configuration and a sandblasted, large grit, acid-etched (SLA) surface. MATERIALS AND METHODS: A total of 151 implants were consecutively placed in posterior sites of 116 partially edentulous patients in a referral clinic at the School of Dental Medicine, University of Bern. All implants were restored with cemented crowns or fixed partial dentures after a healing period of 6 to 8 weeks (for implants placed without simultaneous bone augmentation) or 10 to 14 weeks (for implants with simultaneous bone augmentation). All patients were recalled 36 months following implant placement for a clinical and radiographic examination. RESULTS: One implant failed to integrate during healing, and 11 implants were lost to follow-up and considered dropouts. The remaining 139 implants showed favorable clinical and radiographic findings and were considered successfully integrated at the 3-year examination. This resulted in a 3-year success rate of 99.3%. Radiographic evaluation of 134 implants indicated stability of the crestal bone levels: During the study period, the crestal bone level changed less than 0.5 mm for 129 implants. CONCLUSION: Successful tissue integration was achieved with wide-body implants with a regular or a wide-neck configuration and an SLA surface with high predictability. This successful tissue integration was well maintained for up to 3 years of follow-up.     

Immediate restoration of nonsubmerged titanium implants with a sandblasted and acid-etched surface: five-year results of a prospective case series study using clinical and radiographic data

The aim of this study was to evaluate the survival and success rates of immediately restored implants with sandblasted, large-grit, acid-etched (SLA) surfaces over a period of 5 years. Twenty patients (mean age, 47.3 years) received a total of 21 SLA wide-neck implants in healed mandibular first molar sites after initial periodontal treatment. To be included in the study, the implants had to demonstrate primary stability with an insertion torque value of 35 Ncm. A provisional restoration was fabricated chairside and placed on the day of surgery. Definitive cemented restorations were inserted 8 weeks after surgery. Community Periodontal Index of Treatment Needs (CPITN) indices and the radiographic distance between the implant shoulder and the first visible bone-implant contact (DIB) were measured and compared over the study period. The initial mean CPITN was 3.24, and decreased over the study period to 1.43. At the postoperative radiographic examination, the mean DIB was 1.41 mm for the 21 implants, indicating that part of the machined neck of the implants was placed slightly below the osseous crest. The mean DIB value increased to 1.99 mm at the 5-year examination. This increase proved to be statistically significant (P < .0001). Between the baseline and 5-year examinations, the mean bone crest level loss was 0.58 mm. Success and survival rates of the 21 implants after 5 years of function were 100%. This 5-year study confirms that immediate restoration of mandibular molar wide-neck implants with good primary stability, as noted by insertion torque values of at least 35 Ncm, is a safe and predictable procedure.     

Bone interface of dental implants cytologically influenced by a modified sandblasted surface: a preliminary in vitro study.

To study the influences of a modified sandblasted surface (developed by the authors) on the integrating status of titanium (Ti) dental implants and bone in vitro, a three-dimensional experimental model of implant material-osteoblast culture was used. The interaction of Ti discs and osteoblasts at the interface was followed with phase-contrast microscope examination and was further observed histologically and ultra-structurally after one-month culture. Results showed that there was no significant difference between the modified sandblasted surface group and the smooth surface group in the capacity of osteoblasts migrating and attaching to Ti discs. There was, however, a significant difference in the pattern of attachment. Around the polished surface, the migrating and attaching osteoblasts oriented themselves parallel to it; however, around the modified sandblasted surface, the osteoblasts were migrating and attaching perpendicularly. There was also a major difference in the shapes of cells lining the interface; spindle-shaped on the smooth surface versus round and ovoid with a large cellular body and abundant cytoplasm on the modified sandblasted surface. Moreover, transmission electron microscopy revealed an active secretion of collagen fibrils, a bone-matrix-vesicles-mediated mineralization process, and the formation of osteocytes in the modified sandblasted surface group. Therefore, at this in vitro level, it can be concluded that the modified sandblasting surface treatment of dental implants can facilitate bone healing at their osseous interface and enable the real perpendicularly connecting bone-fiber osseointegration to form instead of the capsule-like osseous adaptation.     

Resonance frequency measurement of implant stability in vivo on implants with a sandblasted and acid-etched surface

PURPOSE: To determine the changes in stability as a reflection of early healing around single-stage, roughened-surface implants in humans utilizing resonance frequency analysis (RFA). RFA makes use of a transducer, attached to an implant, which is excited over a range of sound frequencies with subsequent response analysis. MATERIALS AND METHODS: Twenty patients had 1 to 4 implants placed in the posterior maxilla or mandible. Bone type was classified into 1 of 4 groups according to the Lekholm and Zarb index (1985). RFA was used for direct measurement of implant stability on the day of implant placement and consecutively once per week for 6 weeks and at weeks 8 and 10. RESULTS: Twenty-seven ITI SLA implants placed in the premolar and molar regions of the maxilla and mandible were evaluated. Early failure occurred with 1 implant related to parafunction. The remaining 26 implants were distributed as follows: 29.6% in Type 1 bone, 37% in Type 2 or 3 bone, and 33.3% in Type 4 bone. The lowest mean stability measurement was at 3 weeks for all bone types. The percentage decrease in stability from baseline to 3 weeks was highest for Type 4 bone (8.6%), as was the percentage increase in stability from 3 to 10 weeks (26.9%). A Bonferroni adjusted Student t test comparison of bone groups at each time point revealed highly significant differences between implant stability in Types 1 and 4 bone at 3 weeks (P = .004) and a moderately significant difference between Types 2, 3, and 4 bone (P = .08) at 3 weeks. Implant stability did not change significantly during the 10-week period in Type 1 bone (P > .10). With the same test, by 5 weeks, no bone groups showed any difference in implant RFA measurements (P = 1.0). DISCUSSION: This study demonstrated the lowest values for implant stability at 3 weeks after placement for all bone types. This effect was statistically significant and most pronounced in Type 4 bone. CONCLUSION: There was no significant difference in the pattern of stability changes among different bone types after 5 weeks of healing.     

Stability, marginal bone loss and survival of standard and modified sand-blasted, acid-etched implants in bilateral edentulous spaces: a prospective 15-month evaluation

Objectives: Chemical modification of the already proven sand‐blasted and acid‐etched (SLA) implant had increased its surface wettability and consequent early‐term osseointegration characteristics. The aim of this clinical trial was to compare the stability changes, success, survival, peri‐implant parameters and marginal bone loss (MBL) of the early‐loaded standard (SLA) and modified sand‐blasted, acid‐etched (modSLA) implants. Material and methods: A total of 96 SLA and modSLA implants were placed in a bi‐lateral, cross‐arch position to the jaws of 22 patients. Resonance frequency analysis (RFA) was used to measure the implant stability in the surgery and following healing after 1, 3 and 6 weeks. At the stage of loading, a panoramic X‐ray was obtained and RFA measurement was repeated for all implants. Implants were restored by metal–ceramic crowns and followed for 1 year to determine the success, survival rate, peri‐implant parameters and MBL. Results were compared by one‐ and two‐way ANOVA, log‐rank test and generalized linear mixed models (P<0.05). Results: One modSLA implant was lost after 3 weeks following the surgery yielding to a 100 and 97.91% success rate for SLA and modSLA implants, respectively (P=0.323). At the loading stage, modSLA implants showed significantly lower MBL (0.18 ± 0.05 mm) than SLA implants (0.22 ± 0.06 mm; P=0.002). In the loading stage, RFA value of the modSLA implants (60.42 ± 6.82) was significantly higher than the both implant types in the surgical stage (55.46 ± 8.29 and 56.68 ± 8.19), and following 1 (56.08 ± 7.01 and 55.60 ± 9.07) and 3 weeks of healing (55.94 ± 5.95 and 55.40 ± 6.50 for SLA and modSLA implants, respectively). Conclusions: modSLA implants demonstrated a better stability and a reduced MBL at the loading stage. Both SLA and modSLA implants demonstrated a favorable success and survival at the end of 15‐month follow‐up. To cite this article :
Karabuda ZC, Abdel‐Haq J. Arιsan V. Stability, marginal bone loss and survival of standard and modified sand‐blasted, acid‐etched implants in bilateral edentulous spaces: a prospective 15‐month evaluation.
Clin. Oral Impl. Res. 22 , 2011; 840–849
doi: 10.1111/j.1600‐0501.2010.02065.x     

Long-term results and survival rate of implants treated with guided bone regeneration: a 5-year case series prospective study

One of the key factors for attaining osseointegration is the presence of an adequate osseous volume. In patients with inadequate osseous width or height, a bone augmentation using the guided bone regeneration (GBR) concept may be applied either with a simultaneous or a staged approach. The aim of this multicenter prospective case series study was to evaluate the efficacy and predictability of the GBR technique (simultaneous approach) in patients with peri-implant osseous defects, both dehiscences and fenestrations. Results 5 years post-treatment (survival rates and marginal bone level) were assessed. A total of 19 consecutive patients with 26 peri-implant osseous defects (20 dehiscences and six fenestrations) were treated during the period from September 1992 to June 1993 with a simultaneous GBR approach using non-resorbable membranes combined with autogenous bone grafts or decalcified freeze-dried bone allograft. The mean osseous augmentation was 94.8%. Marginal bone levels at re-entry and 5 years after surgery were calculated from standardized periapical radiographs. One implant was lost 3 months after loading. Thus, the cumulative survival rate was 96.1% after 5 years. The mean marginal bone level after 5 years was 2.03 mm (SD=+/-0.5), without a difference between mesial and distal sites. This study demonstrates that implants with peri-implant defects that are treated with GBR had similar survival rates and crestal bone levels compared with implants in native bone.     

The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface: early results from clinical trials on ITI SLA implants

ITI dental implants are available with two bone-anchoring surfaces, a titanium plasma-sprayed (TPS) surface, and a recently introduced sandblasted and acid-etched (SLA) surface. Cell culture and animal tests demonstrate that the SLA surface stimulates bone cell differentiation and protein production, has large amounts of bone-to-implant contact, and results in large removal torque values in functional testing of the bone contact. As a result of these studies, a prospective human clinical trial was initiated to determine whether the 4.1 mm diameter SLA ITI solid screw implants could be predictably and safely restored as early as six weeks after implant placement surgery. The protocol restricted the use of the reduced healing time to a) healthy patients with sufficient bone volume to surround the implant, and b) those patients who had good bone quality (classes I-III) at the implant recipient site. Patients with poorer bone quality (class IV) did not have restorations until 12 weeks after implant placement. The clinical trial is an ongoing multicenter trial, with six centers in four countries, and with follow-up over five years. The primary outcome variable was abutment placement with a 35 Ncm force, with no countertorque and no pain or rotation of the implant. A secondary outcome was implant success, as defined by no mobility, no persistent pain or infection, and no peri-implant radiolucency. To date, 110 patients with 326 implants have completed the one-year post-loading recall visit, while 47 patients with 138 implants have completed the two-year recall. Three implants were lost prior to abutment connection. Prosthetic restoration was commenced after shortened healing times on 307 implants. The success rate for these implants, as judged by abutment placement, was 99.3% (with an average healing time of 49 days). Life table analyses demonstrated an implant success rate of 99.1%, both for 329 implants at one year and for 138 implants at two years. In the 24-month period after restoration, no implant losses were reported for the 138 implants. These results demonstrate that, under defined conditions, solid screw ITI implants with an SLA endosseous surface can be restored after approximately six weeks of healing with a high predictability of success, defined by abutment placement at 35 Ncm without countertorque, and with subsequent implant success rates of greater than 99% two years after restoration.     

The Liverpool Oral Rehabilitation Questionnaire: a pilot study

There are several validated health-related quality of life (HRQOL) questionnaires designed to record patient-derived outcomes in head and neck cancer. None deals specifically with oral rehabilitation. The aim of this study was to pilot a new questionnaire, the Liverpool Oral Rehabilitation Questionnaire (LORQ). The questionnaire consists of 25 items about oral function and denture satisfaction. A four-point Likert scale is used. Sixty-one consecutive patients attending oral rehabilitation clinics completed the LORQ in combination with the University of Washington Head and Neck questionnaire version 3 (UW-QOL) and European Organisation for Research and Treatment of Cancer H and N quality of life questionnaire (EORTC H and N 35). Forty-two patients received questionnaires at baseline, whereas the rest were provided with the questionnaires at various stages of oral rehabilitation. For each item on the questionnaire, a full range of possible responses were given by patients. Kappa coefficients of agreement for test-retest data indicated moderate to very good agreement between repeat questionnaires. There were significant correlations (P < 0.001) between items in the LORQ and those in the UW-QOL and EORTC HN questionnaires. The LORQ also identified differences in responses between non-cancer and cancer groups of patients undergoing oral rehabilitation. This study of the LORQ is encouraging, although data on its responsiveness over time and to intervention is awaited.