The effect of the application of gaseous ozone and ND:YAG laser on glass‐fibre post bond strength

The aim of this study was to investigate the effects of the application of gaseous ozone and Nd:YAG laser on glass‐fibre post bond strength. Forty‐two madibular premolar roots were cut, endodontically instrumented and irrigated with 2.5% NaOCl. Post spaces were prepared and roots were divided into three groups (n = 14). The antimicrobial pretreatment was conducted as follows: gaseous ozone, Nd:YAG laser and control (no additional disinfection methods). Scanning electron microscope analysis was made for each group (n = 2). A resin cement was used for luting the posts. For push‐out test, each root was cut horizontally (two cervical, two middle and two apical). Statistical analyses were performed with one‐way anova (α = 0.05). Fracture types were observed. There was no statistically significant difference between the groups (P > 0.05). There were statistically significant differences in cervical and apical segments of laser and control groups (P < 0.05). The disinfection of the post spaces with Nd:YAG laser and ozone had no adverse effects on bond strength of glass‐fibre post.     

Effect of final irrigation protocols on push‐out bond strength of an epoxy resin root canal sealer to dentin

The purpose of the present study was to evaluate the effect of different final irrigation protocols on push‐out bond strength of an epoxy resin root canal sealer to dentin. Eighty single‐rooted anterior teeth were used. The root canals were partially prepared using a rotary system and the final diameter was standardised using a #5 Gates‐Glidden drill prior to the push‐out bond test. During chemomechanical preparation, 5.25% NaOCl or 2% CHX gel was used. For smear layer removal, 17% ethylenediaminetetraacetic acid (EDTA) or QMix 2 in 1 was applied for 3 min. As final irrigant, 1 mL of NaOCl, CHX solution or distilled water was used. On conclusion of preparation, canals were filled with gutta‐percha/AH Plus sealer. Bond strength was measured by the push‐out test. Data were statistically analysed by Kruskal–Wallis and Mann–Whitney U‐tests. The group NaOCl/EDTA/NaOCl showed significantly higher bond strength values than other groups. In all groups, there were mainly mixed failure patterns. It can be concluded that 5.25% NaOCl proved to be the best solution for the final irrigation when combined with EDTA. The final irrigation protocols affect the push‐out bond strength of AH Plus to dentin.     

Effect of EDTA conditioning upon the retention of fibre posts luted with resin cements

Aim To determine if a final rinse with EDTA improves the short‐term in‐tooth retentive strength of adhesively luted fibre‐reinforced composite posts. Methodology Six different commercial fibre post systems were tested. Post spaces in extracted human anterior teeth were irrigated with either 6% NaOCl or 6% NaOCl followed by 17% EDTA. Posts were luted using the manufacturer’s recommended bonding agent and luting cement. Two different sizes of post were tested for each post system. After 24 h of storage, the retentive strength of the post to the tooth (14 per group, 336 total) was tested using a pull‐out technique. Three‐way anova and the Student–Newman–Kuels test were used to test the effects of irrigation regimen, post size and post brand on the retentive strength of the fibre post. Results Almost every sample failed at the interface between dentine and luting cement. Irrigation method did not have any significant effect (P > 0.14) for any group other than ParaPost Fibre White (P < 0.001). The overall retention of a post appeared to be correlated to the amount of surface texture on the post; the smooth ICEPost was the least retentive brand, the textured FibreKor and the ParaPost Fibre White posts were moderately retained, and the threaded Flexi‐Post Fibre and the Flexi‐Flange Fibre posts were the most retentive brands tested. For all brands, larger diameter posts were more retentive than smaller diameter posts (P < 0.008). Conclusions A final rinse of EDTA did not improve the short‐term retention of fibre posts except for ParaPost Fibre White.     

Various irrigation protocols for final rinse to improve bond strengths of fiber posts inside the root canal

Irrigation after post space preparation and its effects on the bond strength of different adhesive strategies are still an issue of interest. The aim of the present study was to investigate the effects of various irrigation protocols (IPs) on the push‐out bond strengths of fiber posts. One‐hundred and fifty extracted human anterior teeth were divided into three groups (n = 50 each) and endodontically treated. The post space was irrigated before post placement using the following five IPs in each group: IP1 (control): 5 ml of distilled water; IP2: 5.25% sodium hypochlorite (NaOCl) applied with passive ultrasonic irrigation (PUI); IP3: 1% NaOCl applied with PUI; IP4: 18% ethylenediaminetetracetic acid (EDTA) followed by 5.25% NaOCl; and IP5: 2% chlorhexidine (CHX). Fiber posts placement in each group was performed using three different adhesive strategies. A self‐etch adhesive system revealed higher bond strength (16.2 ± 6.9 MPa) compared with an etch‐and‐rinse adhesive (8.5 ± 4.2 MPa) and a self‐adhesive resin cement (9.2 ± 4.7 MPa). The use of 18% EDTA/5.25% NaOCl increased the bond strength of the self‐adhesive resin cement. Conversely, this IP decreased the bond strength for the etch‐and‐rinse adhesive system, whilst 1% NaOCl enhanced the bond strength for the same system. Consequently, each adhesive strategy may need to be adapted to a specific IP.     

Effects of different irrigating solutions and disinfection methods on push-out bond strengths of fiber posts

Objective. The aim of this study was to evaluate the effects of various irrigating solutions and photoactivated disinfection (PAD) on the push-out bond strengths of fiber posts to root dentin. Materials and methods. Thirty-two human teeth were divided into eight groups, as follows: (1) irrigation with physiologic saline (control), (2) NaOCl irrigation, (3) chlorhexidine (CHX) irrigation, (4) ethanol (EtOH) irrigation, (5) NaOCl followed by 17% EDTA irrigation, (6) NaOCl-EDTA supplemented with CHX irrigation, (7) NaOCl-EDTA supplemented with EtOH irrigation and (8) NaOCl-EDTA irrigation supplemented with PAD. After the posts were cemented, the roots were transversally sectioned to obtain four slices (1 mm thick) (n = 16). Push-out tests were conducted by applying a load at 0.5 mm/min, types of fracture failures were recorded and data were analyzed with one-way ANOVA and Tukey post-hoc tests (p = 0.05). Results. Push-out bond strength was significantly affected by the type of irrigating solution and the disinfection protocol (p < 0.05). The bond strength of the EtOH, NaOCl and NaOCl-EDTA-CHX irrigated groups was significantly higher than that of the other groups. The highest bond strength was observed in the EtOH irrigated group and the lowest was the NaOCl-EDTA irrigated group. Conclusions. Irrigation with NaOCl and EDTA combined caused lower bond strength than observed in the control group. However, supplementing this combination with CHX improved the post-dentin bond strengths; supplementing with PAD did not.     

Influence of dentin pretreatment with synthetic hydroxyapatite application on the bond strength of fiber posts luted with 10‐methacryloyloxydecyl dihydrogen phosphate‐containing luting systems

The aim of this in vitro study was evaluate the effect of application of synthetic hydroxyapatite on fiber post bond strength to radicular dentine. Forty, single‐root teeth were endodontically treated and an 8 mm post space was prepared. Specimens were randomly placed in four groups (n = 10 in each) and treated using the following fiber post luting procedures: group 1, 17% EDTA + Panavia SA; group 2, 17% EDTA + Teethmate Desensitizer + Panavia SA; group 3, All‐Bond Universal + Duo‐Link Universal; and group 4, All‐Bond Universal + Teethmate Desensitizer + Duo‐Link Universal. Fiber posts were luted in the post space and light‐cured for 120 s using a light‐emitting diode (LED) lamp. After 7 d of storage at 37°C, the teeth were cut into 1‐mm‐thick slices, which were subjected to a push‐out test until failure using a universal testing machine. Two specimens per group were prepared for scanning electron microscopy analysis. An energy‐dispersive X‐ray spectroscopy detector was used for elemental analysis of the specimen surface. The results were statistically analyzed using one‐way anova . The fiber post bond strength was statistically significantly increased after the application of Teethmate Desensitizer to post space walls, either with a 10‐MDP‐containing self‐adhesive cement or with a universal adhesive. Scanning electron microscopy and EDAX analysis showed that Teethmate Desensitizer created a calcium phosphate precipitate over post space dentinal tubules, which significantly improved the bond strength of the fiber post luted with 10‐methacryloyloxydecyl dihydrogen phosphate (10‐MDP)‐containing adhesive systems.     

Effect of three radicular dentine treatments and two luting cements on the regional bond strength of quartz fibre posts

The purpose was to investigate by push-out tests and scanning electron microscopy (SEM)/energy-dispersive spectroscopy (EDS) the effect, after first acid etching the post space walls, of three radicular dentine treatments on the regional bond strength of quartz fibre posts placed using two heavily filled resin luting cements. The crowns of 39 extracted maxillary central incisors were sectioned transversely 2 mm coronal to the labial cement-enamel junction and the roots endodontically treated. After standardized post space preparations and etching 15 s with 32% phosphoric acid, 36 roots were randomly divided into six equal groups. Quartz fibre posts (D.T. LIGHT-POST) were placed using three radicular dentine treatments (0.9% sodium chloride (NaCl) for 60 s, 10% sodium hypochlorite (NaOCl) for 60 s, 17% ethylenediaminetetraacetic acid (EDTA) for 60 s followed by 5.25% NaOCl for 60 s) and two resin composite luting cements (ONE-STEP PLUS/DUO-LINK; ONE-STEP PLUS/LuxaCore Dual). Transverse segments (S1–S7), 1.00 mm (SD = 0.05 mm) thick, were sectioned from the coronal 8 mm of each root. Push-out bond strength tests were performed on coronal, middle and apical post space segments (S2, S4, S6) at a crosshead speed of 0.5 mm/min. Data were recorded and analyzed using a two-way mixed ANOVA design (a = 0.05). Three segments (S1, S5, S7) from roots in each group were examined using SEM/EDS. After post space preparation, acid etching and using each of the three radicular dentine treatments, the three remaining roots were sectioned longitudinally for SEM observation of the post space walls. At all root segment sites, the mean bond strengths from using 0.9% NaCl were significantly lower than for the other two radicular dentine treatments (P ≤ 0.02), and DUO-LINK cement had significantly higher mean bond strengths than LuxaCore Dual cement (P ≤ 0.01). There was a significant linear trend for reduced bond strengths from coronal to apical post space segments (P < 0.001), which was supported by the SEM/EDS observations of dentine tubule appearance and resin tag formation. Acid etching followed by either 10% NaOCl or 17% EDTA and 5.25% NaOCl dentine treatments of the post spaces provided good adhesion and resin luting cement tag infiltration of dentinal tubules in the coronal and middle segments in particular.     

The effect of different posts on fracture strength of roots with vertical fracture and re‐attached fragments

Summary The aim of this in vitro study was to test the effect of different post systems on fracture strength of roots with re‐attached fragments. Root canals of eighty extracted single‐rooted human teeth were instrumented (ProFile) and randomly divided into two groups. The roots in the first group were vertically cracked, and the fragments were re‐attached using Super Bond C&B (Sun Medical, Tokya, Japan). The roots in the second group were kept sound. Obturation of the roots was performed with MetaSEAL (Sun Medical) and gutta‐percha. Post spaces were prepared, and the roots were restored with one of the followings: UniCore (Ultradent), Everstick (Stick Tech), Ribbond (Ribbond), ParaPost (Coltene/Whaledent) (n = 10). Four mm high build‐ups were created (Clearfil DC Bond Core; Kuraray, Tokyo, Japan). Compressive loading of the samples was performed after 24 h (1 mm min^?1). Mean load necessary to fracture each sample was recorded (Newton) and statistically analysed (One‐way anova , t‐tests). ParaPost showed the highest fracture strength among the roots with re‐attached fragments (P < 0.05). UniCore and ParaPost systems showed similar fracture strength in the sound roots (P > 0.05). Re‐attached fragments significantly reduced the fracture strength of roots in UniCore group (P = 0.000). Ribbond post showed mostly repairable fractures. Metal post (ParaPost) showed the highest fracture strength in the roots with re‐attached fragments; however, fracture pattern was 41% non‐repairable. Re‐attached fragments significantly reduced the fracture strength of the roots in UniCore group. Prefabricated posts showed similar fracture strength in the sound roots. Customized post systems EverStick and Ribbond showed mostly repairable failure after loading in sound roots or roots with re‐attached fragments.     

Bond strength of self-adhesive resin cement to root dentin. Comparison of photon-initiated photoacoustic streaming technique with needle and ultrasonic irrigation

Abstract

Objective. The aim of this study was to investigate the effects of photon-initiated photoacoustic streaming (PIPS) with various irrigating solutions on the bond strength of a self-adhesive resin cement to root dentin. Materials and methods. Seventy-two mandibular premolar roots were divided into six groups after post space preparation and treated with a needle irrigation with distilled water and NaOCl, ultrasonic irrigation with NaOCl, PIPS with NaOCl, PIPS with EDTA and PIPS with distilled water at 0.3 W, 15 Hz and 20 mJ per pulse for 60 s. Fiber posts were cemented with a newly marketed, self-adhesive resin cement. The data obtained from the push-out tests were analyzed using analysis of variance (ANOVA) and LSD post-hoc tests (p = 0.05). Results. PIPS with distilled water resulted in higher push-out values than those of needle (with both distilled water and NaOCl) and ultrasonic irrigation (p < 0.05). Conclusions. The use of PIPS may provide higher bond strength of self-adhesive resin cement to root dentin than needle and ultrasonic irrigation techniques.     

Effect of sodium hypochlorite irrigation with or without surfactants on the bond strength of an epoxy-based sealer to dentin

Objectives

This study evaluated the effect of sodium hypochlorite (NaOCl) irrigation with or without surfactants on the bond strength of an epoxy-based sealer to the root canal dentin.

Materials and methods

Eighty decoronated single-rooted human mandibular premolars were instrumented using the rotary system. The roots were subsequently rinsed with 5 ml 17 % EDTA for 1 min and then randomly divided into 3 test groups (n = 20) and 1 control group (n = 20) according to the type of irrigation with experimental 5 % NaOCl (Wizard, RehberKimya, Istanbul, Turkey) solutions: Group 1: NaOCl-0.1 % benzalkonium chloride; Group 2: NaOCl-0.1 % Tween 80; Group 3: NaOCl-0.1 % Triton X-100; control group: NaOCl without any surfactants. Five samples from each group were prepared for scanning electron microscopy to examine the surface of root canal dentin. The 15 samples remaining in each group were obturated with gutta-percha and AH Plus (Dentsply DeTrey GmbH, Konstanz, Germany) using the cold lateral compaction technique. A push-out test was used to measure the bond strength between the sealer and root canal dentin. Data were analyzed using two-way analysis of variance and Tukey’s post hoc tests (P = 0.05).

Results

The NaOCl-0.1 % Triton X-100 group demonstrated the highest mean bond-strength values in all root thirds among the groups (P < 0.05). However, the bond strength of the sealer in the NaOCl-0.1 % benzalkonium chloride and NaOCl-0.1 % Tween 80 groups did not differ from that in the control group (P > 0.05). Additionally, the bond-strength values decreased in the corono-apical direction for all groups (P < 0.05).

Conclusions

NaOCl solution with Triton X-100 can provide higher bond strength of the epoxy resin-based sealer to root dentin compared to NaOCl solution wiithout any surfactant.

Clinical relevance

The bond strength of sealer to dentin can be improved by the addition of the surfactants to NaOCl solution.

     

The effects of calcium hydroxide removal methods on bond strength of Epiphany SE with two irrigation protocols

Abstract

Objective: The purpose of this study was to compare the effects of five calcium hydroxide removal methods on the bond strength of Epiphany SE sealer after canal irrigation with NaOCl+EDTA or NaOCl+MTAD. Materials and methods: The 120 roots were instrumented by using the ProTaper rotary system under irrigation with 2.5% sodium hypochlorite and randomly divided into two major groups according to the final irrigation: 1.3% NaOCl + MTAD and 5% NaOCl + 17% EDTA. For controls, 10 roots from each of the final irrigations with NaOCl + MTAD and NaOCl + EDTA (20 roots) were not filled with Ca(OH)₂. The intra-canal paste, Ca(OH)₂ was applied to each of the 100 remaining roots and stored at 37°C for 7 days. Each group was sub-divided into five sub-groups (n = 10) according to the removal technique for the intra-canal dressing: Group-1: recapitulation with size 30 K file + 3 ml of saline solution, Group-2: recapitulation with size 30 K file + 3 ml of 5% NaOCl, Group-3: using 5% NaOCl + 17% EDTA, Group-4: using 5%NaOCl + 15% citric acid, and Group-5: using 1.3% NaOCl + 5 ml MTAD. The root canals were filled with Resilon and Epiphany SE sealer. The bond strength was measured. Results: The mean bond strength of Epiphany SE to root dentine irrigated with NaOCl + MTAD was lower than that of NaOCl + EDTA. The highest bond strengths were 3.31 ± 0.057 and 2.60 ± 0.054 in the NaOCl + citric acid group when Ca(OH)₂ was applied to roots treated with NaOCl + EDTA and NaOCl + MTAD, respectively (p < 0.05). Conclusion: For root canals treated with NaOCl + EDTA or NaOCl + MTAD, the use of NaOCl + chelating agent for Ca(OH)₂ removal does not adversely affect the bond strength of Epiphany SE to dentin.     

Dentinal tubule penetration and root canal cleanliness following ultrasonic activation of intracanal‐heated sodium hypochlorite

This study investigated the effect of ultrasonic activation of intracanal‐heated sodium hypochlorite (NaOCl) on its dentinal tubular penetration and root canal cleanliness in vitro. In experiment 1, mandibular premolars were randomly allocated to three groups (n = 8): group A, ultrasonic activation; group B, ultrasonic activation of intracanal‐heated NaOCl and group C, syringe‐and‐needle irrigation. Penetration of the fluorescent‐labelled NaOCl was investigated using light microscopy. In experiment 2, mandibular premolars were randomly allocated to group B or C (n = 10), for histological analysis of the remaining pulp tissue and debris. Data were statistically analysed using Kruskal–Wallis and Mann–Whitney tests (P = 0.05). The highest penetration of NaOCl was observed in group B, followed by group A (P < 0.05). Group B showed significantly less amount of debris than group C (P < 0.05). Dentinal tubule penetration of NaOCl and root canal cleanliness were significantly improved by ultrasonic activation of intracanal‐heated NaOCl.     

Effect of post-space treatment on retention of fiber posts in different root regions using two self-etching systems

The effect of post-space treatment on the retention of fiber posts in different root regions was evaluated using two self-etching systems. Post spaces were prepared in extracted premolars and then the root canals were subjected to one of the following post-space treatments: (i) water irrigation (control); (ii) etching with 35% phosphoric acid for 30 s; (iii) irrigation with 17% EDTA followed by 5.25% sodium hypochlorite (NaOCl); and (iv) ultrasonic agitation associated with 17% EDTA and 5.25% NaOCl irrigating solutions. The dentin surfaces were examined under scanning electron microscopy (SEM) after different post-space treatments. Fiber posts were then luted in the treated roots using resin cement with either Clearfil SE Bond or Clearfil DC Bond, and the thin-slice push-out test was performed. Scanning electron microscopy showed that all the post-space treatments tested were effective in removal of the smear layer of debris, or sealer/gutta-percha remnants, on the root canal. The apical push-out strength was affected by post-space treatment. Both 35% phosphoric acid etching and ultrasonic agitation in combination with EDTA/NaOCl irrigation improved the apical push-out strength of the fiber post, regardless of the type of self-etching system. A solo irrigation with an EDTA/NaOCl solution resulted in a lower apical push-out strength compared with the other two experimental groups.     

Effect of a 12‐methacryloyloxy‐dodecyl‐pyridinium‐bromide–containing adhesive with different post types on the long‐term bond strength to dentin

The use of matrix metalloproteinase (MMPs) inhibitors, such as 12‐methacryloyloxy‐dodecyl‐pyridinium‐bromide (MDPB), might improve the adhesion of glass‐fiber (GF) and polyfiber (PF) posts to root dentine. This study assessed the effect of an MDPB‐containing adhesive on the long‐term bond strength of GF or PF posts to bovine dentine. Bovine endodontically treated roots were randomly divided into six groups, according to the post type and adhesive system used, as follows: GF serrated post + MDBP‐free adhesive; GF serrated post + MDPB‐containing adhesive; GF smooth post + MDBP‐free adhesive; GF smooth post + MDPB‐containing adhesive; PF post + MDBP‐free adhesive; PF post + MDPB‐containing adhesive. Specimens were stored in water for 6 months, thermocycled (500 cycles wk^?1), and submitted to the pull‐out test and failure pattern analysis. The cement–dentin interface was evaluated using scanning electron microscopy. The pull‐out data were analyzed using anova and Tukey's test (α = 0.05). No significant interaction between the type of post and the adhesive system was found. Polyfiber posts showed lower bond strength than GF posts, whether serrated or smooth, and the bond strength of the serrated and smooth GF posts was not significantly different. Adhesive failures were predominant in all groups. The type of retainer influenced the bond strength, and MDPB‐containing adhesive did not improve the long‐term bond strength of posts to dentine.     

不同根管清洗方法对纤维桩粘接强度的影响

目的 通过对根管壁内表面进行不同方式的处理来提高纤维桩的粘接强度.方法 36颗新鲜无龋单根管离体前磨牙桩道预备后随机分为6组,分别进行根管内壁处理.Ⅰ组(对照组)使用生理盐水冲洗,Ⅱ组使用2%氯己定溶液和17%乙二胺四乙酸(EDTA)溶液冲洗,Ⅲ组使用3%过氧化氢溶液、17%EDTA溶液冲洗,Ⅳ组使用5.25%次氯酸钠...     

Assessment of smear layer removal protocols in curved root canals

This study sought to assess if the final rinse protocol interferes with the smear layer removal in the apical area of curved canals. Sixty‐four extracted human mandibular molars with curved mesial roots were instrumented with rotary files and divided into six experimental groups for final rinse: 1EDTA (syringe irrigation with 1 mL of 17% ethylenediaminetetraacetic acid (EDTA) ), 5EDTA (syringe irrigation with 5 mL of 17% EDTA), 1EDTA‐P (syringe irrigation with 1 mL of 17% EDTA + pumping with gutta‐percha point), 5EDTA‐P (syringe irrigation with 5 mL of 17% EDTA + pumping with gutta‐percha point), 1EDTA‐EA (syringe irrigation with 1 mL of 17% EDTA + EndoActivator) and 5EDTA‐EA (syringe irrigation with 5 mL of 17% EDTA + EndoActivator). Final rinsing was carried out over 3 min. The specimens were split lengthwise and observed under a scanning electron microscope using a score criterion. Comparison among the groups showed statistically significant difference only between the 5EDTA‐EA group and the other groups (Kruskal–Wallis and Dunn's post‐hoc tests, P < 0.05). The combination of 5 mL of 17% EDTA and 3 mL of 2.5% sodium hypochlorite (NaOCl) with the EndoActivator removed smear layer from the apical area of curved root canals more effectively than the other protocols used.     

Effect of Photoactivated Disinfection on Bond Strength of Root Canal Filling

IntroductionThe aim of this in vitro study was to assess and compare the effect of photoactivated disinfection (PAD) on the bond strength of root canal sealers to human root canal dentin using the push-out test.MethodsFifteen extracted human mandibular premolar teeth with single and straight roots were used. After the clinical crowns were removed from the cementoenamel junction, root canals were prepared with the ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) rotary system to the size of the F3 file. The smear layer of the roots was removed using 17% EDTA followed by 5.25% sodium hypochlorite (NaOCl) and distillate water. The roots were then randomly divided into 3 groups (n = 5) according to the final irrigation regimen. In group 1, PAD (FotoSan; CMS Dental, Copenhagen, Denmark) was applied to the root canals and light cured for 20 seconds. Group 2 was finally irrigated with a 2% solution of chlorhexidine gluconate, and group 3 served as the control group (NaOCl + EDTA). All the canals were then obturated with the lateral condensation technique using gutta-percha and AH Plus sealer (Dentsply Maillefer) sealer. One-millimeter-thick horizontal sections from the coronal and midthirds of each root (n: 5 × 4 = 20) were sliced for the push-out bond strength measurement. The data were converted to megapascals and statistically analyzed using 1-way analysis of variance and the post hoc Tukey test.ResultsThere was no significant difference among the bond strength of PAD, chlorhexidine gluconate, and NaOCl (P > .05).ConclusionsWe conclude that PAD does not adversely affect the bond strength of the AH Plus sealer to root canal dentin and that it can be used for the final disinfection of root canals.     

Influence of endodontic sealer cement on fibreglass post bond strength to root dentine

Aim To test the hypothesis that the composition of endodontic sealer cements and the time elapsed between root filling and fibreglass post fixation interferes with adhesion to root canal dentine. Methodology Sixty bovine incisor roots were divided into five groups (n = 12): CI, unfilled; SI, filled with a calcium hydroxide‐based cement‐Sealer 26, and immediate post fixation; S7, Sealer 26 and post fixation after 7 days; EI, filled with a zinc oxide and eugenol‐based cement‐Endofill and immediate fixation; and E7 Endofill and post fixation after 7 days. The posts were cemented with adhesive system and dual resin cement. Ten roots were cross‐sectioned to obtain two 1‐mm‐thick discs for each cervical (TC), middle (TM) and apical (TA) third of the prepared root portion. The posts were submitted to a micropush‐out test. The other two teeth were evaluated using scanning electron microscopy to analyse the bond interface. Data were analysed using anova , Tukey and Dunnett tests (P < 0.05). Results Group EI was associated with a significant reduction in bond strength values irrespective of the root region; TC = 3.50 MPa (P = 0.0001); TM = 2.22 MPa (P = 0.0043) and TA = 1.45 MPa (P = 0.003). Region of canal had an influence on the values for the cement used in group E7, in which only the TA presented differences from the CI. Conclusions Endofill interfered negatively with the bond to root dentine along its full length and in the TA when post fixation was delayed for 7 days. Bond strength decreased from crown to apex in all groups.     

Effect of irrigation protocol during post space preparation on the dentin adhesive interface: An in vitro study

Statement of problemThe post space must be prepared with techniques that do not interfere with the bond strength. These techniques are related to the availability of opened dentinal tubules and incidence of residue among the dentin, the adhesive, and the cement. Nevertheless, the effect of different irrigants during endodontic instrumentation is unclear.PurposeThe purpose of this in vitro study was to assess the incidence of residue, the number of opened dentinal tubules, and the bond strength of the cementation system to root dentin of post space after 3 different irrigation protocols.Material and methodsThe roots of bovine incisors were obturated, prepared to receive a fiber post, and divided into 3 groups as per the irrigation protocol: without irrigation, with alternating irrigation, and with continuous irrigation. Thirty roots (n=10) were evaluated by using scanning electron microscopy to assess the incidence of residue (×100 magnification) and the number of opened dentinal tubules (×2000 magnification). The fiber posts were cemented, and the remaining specimens (n=10) were subjected to pushout testing and failure mode evaluation.ResultsAll protocols presented a similar incidence of residue, regardless of the post space third (P>.05). The irrigation protocol without irrigation had the lowest number of opened dentinal tubules in the cervical and middle thirds (P<.05). The number of opened dentinal tubules was similar in all protocols in the apical third of the post space (P>.05). The irrigation protocol without irrigation had the lowest bond strength values in the cervical and middle thirds (P<.05). The irrigation protocol with continuous irrigation had the highest bond strength values in the apical third (P<.05).ConclusionsPost space preparation without irrigation negatively affected the bond strength of the resin cementation system to root dentin.     

Effects of different irrigation solutions on root dentine microhardness,smear layer removal and erosion

This study aimed to compare the effects of different irrigants on root dentine microhardness, erosion and smear layer removal. A total of 72 root dentine slices were divided into six groups, according to the final irrigants used: Group 1: 17% ethylenediamine tetra‐acetic acid (EDTA) + 2.5% NaOCl, Group 2: 7% maleic acid (MA) + 2.5% sodium hypochloride (NaOCl), Group 3: 1.3% NaOCl + mixture of tetracycline, acid and detergent (MTAD), Group 4: Smear Clear + 2.5% NaOCl, Group 5: 5% NaOCl, Group 6: saline. Vickers microhardness values were measured before and after treatment. In total, 42 root‐halves were prepared for scanning electron microscope to evaluate the amount of smear and erosion in the coronal, middle and apical thirds. Data were analysed using two‐way anova , Duncan and two‐proportion z‐tests. Maleic acid showed the greatest reduction in dentine microhardness (P < 0.05), followed by EDTA and MTAD. EDTA, maleic acid, MTAD and Smear Clear removed smear layer efficiently in the coronal and middle thirds of root canal. However, in the apical region, maleic acid showed more efficient removal of the smear layer than the other irrigants (P < 0.05).