Five-year prospective evaluation of mandibular overdentures retained by two microthreaded, TiOblast nonsplinted implants and retentive ball anchors

PURPOSE: The aim of this 5-year prospective evaluation was to assess the bone and peri-implant mucosa responses at unsplinted, microthread implants supporting mandibular overdentures and to determine patient responses to therapy. MATERIALS AND METHODS: Two implants were placed by a 1-stage procedure in the parasymphyseal mandibles of 59 subjects. Implant placement was followed by immediate insertion of overdentures without connection to abutments. After 3 months, connection using Dalla Bona attachments was made and peri-implant mucosa, peri-implant bone, and patient perceptions of treatment were evaluated. RESULTS: The implant success rate was 95.9% from 6 to 60 months. The changes in marginal bone levels were positive (bone gain) but did not reach statistical significance at 12, 36, or 60 months (+0.13 +/- 0.59 mm, +0.23 +/- 0.66 mm, and +0.09 +/- 0.79, respectively). Treatment was viewed as effective; patients rating satisfaction with their teeth increased from a preoperative level of 12.1% to 94.6% at overdenture abutment connection and remained high (81.6%) after 5 years. CONCLUSIONS: Expedited mandibular overdenture therapy utilizing unsplinted, microthreaded mandibular parasymphyseal implants was associated with high implant survival, preservation of crestal bone, and high patient satisfaction. Complications were minor and related to prosthodontic features of therapy.     

One-Year Prospective Evaluation of the Early Loading of Unsplinted Conical Brånemark Fixtures with Mandibular Overdentures Immediately following Surgery

Background: Prospective evaluation of the early loading of unsplinted Branemark implants with mandibular over‐dentures opposing conventional dentures is not evident in the implant‐related literature. Purpose: To clinically evaluate progressive and early loading of 20 unsplinted conical Brånemark implants in edentulous mandibles with overdentures. Materials and Methods: Ten edentulous patients all had two conical Brånemark implants placed in the anterior mandible with mandatory primary stability with bicortical anchorage. Ball abutment connection was performed simultaneously. Previously constructed conventional mandibular dentures were temporarily relined with tissue conditioner postoperatively and worn with moderation for the first 2 weeks to allow progressive loading. Early loading of the implants followed after 2 weeks, with inclusion of the respective matrices in the mandibular dentures, using a definitive reline procedure. Results: All patients successfully functioned with their mandibular implant overdentures from 2 to 52 weeks postoperatively. Mean marginal bone loss was within established criteria for success:0.22 mm (SD = 0.48 mm) mesially and 0.30 mm (SD = 0.39 mm) distally on the conical implants. Mobility tests using the Periotest instrument became more negative, although not at statistically significant levels. Difficulties in the management of the peri‐implant mucosa between surgery and loading at 2 weeks were observed in 40% of the patients. Conclusions: These preliminary 1‐year results show that successful early loading of unsplinted conical Brånemark implants with mandibular overdentures is possible.     

Peri-implant tissue response of immediately loaded, threaded, HA-coated implants: 1-year results

STATEMENT OF PROBLEM: Although high success rates have been reported with immediately loaded implants, the peri-implant tissue response has not been well documented. PURPOSE: This study evaluated implant success and peri-implant tissue response of immediately loaded, threaded, hydroxyapatite (HA)-coated root-form implants supporting mandibular bar overdentures with opposing conventional maxillary complete dentures in humans. MATERIAL AND METHODS: Five patients (3 men, 2 women; mean age 61 years) each received 4 HA-coated endosseous root-form implants in the interforaminal region in the mandible. The implants were rigidly splinted with a metal framework within 24 hours. The final EDS clip prosthesis was placed 1 to 2 weeks thereafter. The implants and peri-implant tissues were evaluated clinically and radiographically 0, 1, 3, 6, and 12 months after prosthesis placement. Data were analyzed with a repeated measures 1-way analysis of variance (P<.05). RESULTS: All implants were stable at the end of the observation period (mean Periotest value = -5.9 +/- 1.4). No peri-implant radiolucencies were noted, and no implants were lost. The mean marginal bone changes were -0.42 plus minus 0.34, -0.84 +/- 0.55, -1.14 +/- 0.80, and -1.16 +/- 0.89 mm at the 1-, 3-, 6-, and 12-month follow-ups, respectively (P<.001). Significant declines in the rates of marginal bone changes at each time interval were noted (P<.001). In addition, there were significant decreases in probing depth (P<.001) and plaque index (P<.001) but no significant difference in the frequency of bleeding upon probing (P=.64). CONCLUSION: Within the limitations of this study, the peri-implant tissue response of immediately loaded, HA-coated implants was favorable and comparable to that of conventional, delayed-loaded implants after 1 year.     

Early versus late loading of unsplinted TiUnite surface implants supporting mandibular overdentures: a 2-year report from a prospective study

The aim of this study was to evaluate the clinical performance of the implants supporting mandibular overdentures, and to investigate the prosthodontic outcomes of the mandibular implant overdentures. Twenty edentulous patients participated in this study. Forty implants were placed in the canine areas of the mandibles of all patients using the 1-stage approach. New maxillary complete dentures and the mandibular implant overdentures were delivered to 10 patients in the test group 1 week after surgery, while new maxillary and mandibular complete prostheses were delivered to 10 patients in the control group. These conventional mandibular prostheses were converted to mandibular implant overdentures 3 months after surgery. No implants were lost neither in test nor in control group. The average ISQ values between the two groups were not statistically significant during 2 years (P > 0.05). The average marginal bone resorptions were 0.4 and 0.5 mm for the test and the control group after 2 years. The number of appointments required for the prosthodontic maintenance of the mandibular implant overdentures in the first year was higher than that in the second year, which was statistically significant(P < 0.001). The results of the study suggest that the 1-week early loading approach does not adversely influence the clinical performance of the implants supporting mandibular overdentures.     

Early functional loading of unsplinted roughened surface implants with mandibular overdentures 2 weeks after surgery

Background: Before early functional loading of unsplinted implants with mandibular overdentures can become widespread, more clinical studies are needed to investigate the success of the approach. Purpose: To evaluate the success rates of two types of roughened titanium surface implants with early 2‐week functional loading of paired mandibular interforaminal implants with overdentures. Materials and Methods: Random allocation divided 24 strictly selected edentulous participants into two groups, with each group to receive a different implant system (ITI Dental Implant System, Straumann AG, Waldenburg, Switzerland; or Southern Implant System, Southern Implants, Irene, South Africa). Two implants were placed in the anterior mandible of all participants using one‐stage standardized surgical procedures. Previously constructed conventional mandibular dentures (opposing maxillary complete dentures) were temporarily relined and worn by the participants for the first 2 weeks; participants used a soft diet. Two weeks after implant surgery and following some mucosal healing, the mandibular dentures had the tissue conditioner removed and the appropriate matrices included for an unsplinted prosthodontic design. Results: No implant from either group was lost. Resonance frequency analysis (RFA) indicated higher primary stability at surgery for the Southern group than for the ITI group, with a statistically significant difference between the groups throughout the study period. The drop in RF values between surgery and 6 weeks was significant and was greater for the Southern group. RFA also indicated stabilized osseointegration between 6 to 12 and 12 to 52 weeks, with no participant showing any decrease in those values over time. Participants with type 3 bone showed a significant improvement in RF values between 12 and 52 weeks, eventually matching those of participants with type 2 bone. There were no significant differences in marginal bone loss, periimplant parameters, or prosthodontic maintenance between the groups over the study period. Conclusions: Using only strict patient selection criteria, 1‐year follow‐up data indicate that early functional loading of ITI and Southern implants with mandibular two‐implant overdentures is possible as early as 2 weeks after implant surgery.     

Early loading (2 or 6 weeks) of sandblasted and acid-etched (SLA) ITI implants in the posterior mandible. A 1-year randomized controlled clinical trial

The aim of this 1-year prospective controlled clinical trial was to evaluate the effect of early loading of ITI solid screw titanium implants with a sandblasted and acid-etched (SLA) surface on clinical and radiographic parameters. MATERIAL AND METHODS: Twenty-seven consecutively admitted patients presenting bilateral edentulous posterior mandibular areas and in need of prosthetic reconstruction were recruited. Sixty-seven ITI standard solid screw implants with an SLA surface, a diameter of 4.1 mm and a length of 8, 10 or 12 mm were installed bilaterally in molar and premolar areas according to a one-stage surgical protocol. One week (test) and 5 weeks (control) after implant placement, solid ITI prosthetic abutments were connected using a torque of 35 N cm. No provisional restoration was fabricated. Two weeks (test) and 6 weeks (control) after implant placement, porcelain-fused-to-metal single-tooth crowns were cemented. Clinical measurements were obtained at day 0 and 2, 6, 12, 24 and 52 weeks thereafter. Periapical radiographs were taken immediately after implant placement, after 6 weeks and at the 1-year examination. RESULTS: After 1 year, implant survival was 100%. Two test and one control implants rotated at the time of abutment connection and were left unloaded for 12 additional weeks. At the 1-year examination, no statistically significant differences were found between the test and control sites with respect to pocket probing depths (2.6 mm +/- 0.5 vs. 2.7 mm +/- 0.5), mean clinical attachment levels (3.1 mm +/- 0.4 vs. 3.2 mm +/- 0.5), mean percentages of sites bleeding on probing (9.7% vs. 8.3%), mean widths of keratinized mucosa (1.8 mm +/- 0.4 vs. 1.9 mm +/- 0.5), mean PerioTest values (-1.4 PTV +/- 0.9 vs. -1.6 PTV +/- 0.8) or mean crestal bone loss measurements (0.57 mm +/- 0.49 vs. 0.72 mm +/- 0.50). CONCLUSION: Based on these results, loading of titanium implants with an SLA surface as early as 2 weeks did not appear to jeopardize the osseointegration healing process in the posterior mandible. Furthermore, implants rotating at 35 N cm, if left unloaded for additional 12 weeks, did not negatively affect clinical and radiographic outcomes.     

Marginal bone resorption around immediate and delayed loaded implants supporting a locator‐retained mandibular overdenture. A 1‐year randomised controlled trial

The aim of this 1‐year study was to evaluate and compare crestal bone loss and clinical outcomes of immediate and delayed loaded implants supporting mandibular overdentures with Locator attachments. In a randomised controlled clinical trial, 36 completely edentulous patients (mean age 59·6 years) who desired to improve the stability of their mandibular dentures were randomly assigned into two groups. Each patient received two implants in the canine area of the mandible after a minimal flap reflection. Implants were loaded by mandibular overdentures either 3 months (delayed loading group, G1) or the same day (immediate loading group, G2) after implant placement. Locator attachments were used to retain all overdentures to the implants. Peri‐implant vertical (VBL) and horizontal (HBLO) bone losses and clinical parameters [plaque scores (PI), gingival scores (GI), probing depths (PD) and implant stability (ISQ)] were assessed at time of overdenture insertion (T0), 6 months (T6) and 12 months (T12) after overdenture insertion. After 12 months of overdenture insertion, two implants (5·5%) failed in G2. Vertical bone loss was significantly higher in G2 compared with G1, while HBLO demonstrated insignificant differences between groups. All clinical parameters (PI, GI, PD and ISQ) did not differ significantly between groups. Vertical bone loss was significantly correlated with PD and HBLO. Immediately loaded two implants supporting a Locator‐retained mandibular overdenture are associated with more vertical bone resorption when compared to delayed loaded implants after 1 year. Clinical outcomes do not differ significantly between loading protocols.     

A 2-year clinical report of patients treated with two loading protocols for mandibular overdentures: early versus conventional loading

BACKGROUND: The original Br?nemark protocol for dental implant treatment was based on submerged healing prior to loading. In recent years, immediate/early functional loading has been reported to be possible with high success for various indications including two splinted mandibular implants supporting an overdenture. However, there are a limited number of studies regarding the early loading protocol for two unsplinted mandibular implants supporting an overdenture. METHODS: A total of 26 edentulous patients were treated with two unsplinted dental implants supporting mandibular overdentures. All implants were placed in the canine regions of each mandible according to the one-stage surgery. For the test group, overdentures were connected 1 week after surgery, and for the control group, overdentures were connected 3 months after surgery. Peri-implant parameters were recorded 1, 6, 12, 18, and 24 months after surgery. Marginal bone levels were evaluated at implant placement and after 6, 12, 18, and 24 months. Clinical stability measurements were performed at surgery, and after 3, 6, 12, 18, and 24 months. RESULTS: No implant from either group was lost during 2 years. Clinical peri-implant parameters, clinical implant stability measurements, and marginal bone resorptions showed no statistically significant differences between the two groups during 24 months. CONCLUSION: The results of this clinical trial suggest that the early loading approach of two dental implants supporting a mandibular overdenture does not jeopardize peri-implant soft tissue health, marginal bone resorption, and implant stability.     

Ninety percent success in palatal implants loaded 1 week after placement: a clinical evaluation by resonance frequency analysis

To investigate the behaviour of early loaded palatal implants when observed with resonance frequency analysis (RFA). Twenty patients (seven males and 13 females, mean age 26.4 years) received one palatal implant each (length: 4 mm, diameter: 3.3 mm; Orthosystem) for maximum orthodontic anchorage. The implants' stability was observed by RFA. Measurements were carried out at the time of surgery, after first orthodontic loading and subsequently once a week over a period of 12 weeks. Two palatal implants were lost. The other 18 remained stable. The average period from insertion to first loading was 6.7+/-0.8 days. The mean orthodontic force applied was 272.2+/-73.2 cN. The implant stability quotient (ISQ) value at the time of surgery averaged 69.4+/-3.9. The mean ISQ value 6.7 days after insertion was 69.8+/-3.6. Twelve weeks post-surgery the mean ISQ value was 69.8+/-3.5. A statistically significant decrease in stability was observed after 2 and 3 weeks post-surgery (P=0.005 and 0.04). The behaviour of early loaded palatal implants showed an initial decrease of the ISQ values. From 6 weeks post-surgery onward the ISQ values increased. Within the limitations of this study, the results suggest that the healing time of palatal implants reported in the literature (12 weeks) should be discussed. An orthodontic loading of palatal implants 6 weeks post-surgery with a force up to 400 cN seems to be justified. Yet further investigations are necessary to evaluate the behaviour of early loaded palatal implants considering observation periods of over 12 weeks.     

Resonance frequency analysis assessment of implant stability in labial onlay grafted posterior mandibles: a pilot clinical study

PURPOSE: The objectives of this study were (1) to compare the stability, evaluated by means of resonance frequency analysis (RFA), of implants placed posterior mandibles augmented with autogenous bone harvested from the mandibular symphysis with that of implants placed in nongrafted edentulous posterior mandibles and (2) to compare peri-implant marginal bone height changes and implant failure for the 2 groups. MATERIALS AND METHODS: Eight patients with thin posterior mandibular ridges (buccolingual crestal width less than 4 mm) underwent labial onlay alveolar grafting with symphyseal bone blocks 4 months prior to placement of 17 implants. Seven nongrafted patients received 18 implants in the edentulous posterior mandible; these patients served as a control group. RFA was performed the day of implant placement (baseline), 1 month postplacement, 4 months postplacement (after prosthesis delivery), and 12 months postloading. Peri-implant bone height changes at a level of 0.01 mm were assessed using periapical radiographs at baseline, the 1-month follow-up, and the 4-month follow-up. Analysis of variance was used to evaluate statistical differences within the groups, and t test was used to make comparisons between groups. RESULTS: None of the patients presented postoperative complications or implant failure. Mean implant stability quotient (ISQ) was 63.0+/-6.0 to 70.2 +/-3.5 for the grafted group and 64.1+/-4.1 ISQ to 70.1+/-3.9 for the nongrafted group. No significant difference was found in mean ISQ between the grafted and nongrafted groups at baseline, the 1-month follow-up, 4 months postplacement, or 12 months postloading (P = .211, P = .873, P = .925, P = .735, respectively). Mean peri-implant bone loss was 0.16 +/- 0.04 mm mesially and 0.16 +/- 0.05 mm distally. CONCLUSION: RFA revealed no difference in implant stability between mandibular ridges augmented with autologous bone grafts at baseline or after loading.     

Radiographic evaluation of crestal bone levels adjacent to nonsubmerged titanium implants

Several parameters have been described to determine success or failure in long-term evaluations of dental implants. One of these parameters is the observation of changes in peri-implant bone levels. Studies on submerged implants have analyzed the bone level changes in the pre- and post-loading phases. No such data exist for intentionally nonsubmerged implants. The purposes of this study were: (1) to test the applicability and reproducibility of a simple computer-assisted method in the evaluation of changes in peri-implant bone levels; (2) to establish a baseline for the longterm radiographic follow-up; and (3) to evaluate changes in crestal bone levels adjacent to nonsubmerged ITI implants between the 1-year and 2-year examination. Standardized periapical radiographs were obtained from 80 implants at the 1-year and 2-year follow-up examinations after their placement. The implants were located in different jaw areas of 55 patients and supported single crowns or short-span fixed partial dentures. For each implant, the distance from implant shoulder to first crestal bone contact (DIB) was measured at the proximal surfaces with a digitizer/computer assembly. Statistically significant greater mean DIB were found at the 1-year (baseline) evaluation for: (1) maxillary sites overall (4.10 x 1.02 mm (SD)) compared with mandibular sites overall (3.61 +/- 1.03 mm); (2) maxillary anterior sites (4.08 +/- 0.97 mm) compared with mandibular posterior sites (3.60 +/- 1.05 mm); and (3) maxillary posterior sites (4.13 +/- 1.12 mm) compared with mandibular posterior sites. No statistically significant changes in DIB occurred in any of the jaw locations between the 1-year and 2-year evaluations.(ABSTRACT TRUNCATED AT 250 WORDS)     

Maxillary overdentures retained by splinted and unsplinted implants: a retrospective study

The purpose of this retrospective study was to evaluate the clinical performance of and patients' satisfaction with maxillary overdentures retained by splinted and unsplinted implants. Patients who had been treated with maxillary implant-retained overdentures because of functional problems with conventional complete dentures were identified and invited to participate in the study. A total of 16 patients fulfilled the enrollment criteria and agreed to participate. Eleven patients were treated with bar-retained overdentures with 3 to 6 clips (mean follow-up 32 months), and 5 patients wore overdentures retained by 2 to 6 ball attachments (mean follow-up 54 months). All subjects were satisfied with their prostheses, and most subjects experienced improvement in their oral function after treatment with implant-retained overdentures. At the time of clinical examination, 92% (n = 77) of the 84 implants placed were functioning satisfactorily. The cumulative survival rate for the implants after 72 months was 90%. Loss of bone support correlated with peri-implant probing depth (r = 0.29; P < .02). No differences in mean bone loss between the subjects with ball-retained or bar-retained overdentures were found. The presence of plaque or peri-implant bleeding was not associated with the type of attachment.     

Immediate loading of mandibular overdentures supported by unsplinted direct laser metal-forming implants: results from a 1-year prospective study

Background: At present, only some studies have dealt with immediate loading of unsplinted implants supporting mandibular overdentures. The aim of this prospective study is to evaluate treatment outcomes of mandibular overdentures supported by four one‐piece, unsplinted, immediately loaded, direct laser metal‐forming (DLMF) implants by assessing implant survival rate, implant success, marginal bone loss, and prosthetic complications. Methods: A total of 96 one‐piece DLMF implants were inserted in the edentulous mandible of 24 patients. Four implants were placed in each edentulous mandible. Immediately after implant placement, a mandibular overdenture was connected to the implants. At 1‐year follow‐up, clinical, radiographic, and prosthetic parameters were assessed. Success criteria included absence of pain, suppuration, and implant mobility; absence of continuous peri‐implant radiolucency; and distance between the implant shoulder and the first visible bone contact <1.5 mm. Results: After a 1‐year loading time, the overall implant survival rate was 98.9%, with only one implant lost. Among the surviving 95 implants, two did not fulfill the success criteria; therefore, the implant success rate was 97.8%. The mean distance between the implant shoulder and the first visible bone contact was 0.28 ± 0.30 mm (95% confidence interval, 0.24 to 0.32). Some prosthetic complications were reported. Conclusion: Based on the present results and within the limits of this study, the immediate loading of four unsplinted DLMF implants by means of ball attachment–supported mandibular overdentures seems to represent a safe and successful procedure.     

Clinical analysis of wide-diameter frialit-2 implants

PURPOSE: To evaluate wide-diameter (ie, 5.5-mm-wide) Frialit-2 implants used for several forms of prosthetic rehabilitation. MATERIALS AND METHODS: In this retrospective study, 121 wide implants (74 maxillary, 47 mandibular) were placed in 114 patients (61 female, 53 male, mean age 37.2 +/- 14.9 years). Thirty-six single-tooth restorations, 63 fixed partial dentures (68 implants), 6 removable overdentures (7 implants), and 3 fixed complete dentures (8 implants) were placed. Eighty-seven were placed in the molar regions. The follow-up period for the implants was 12 to 114 months (mean 41.8 +/- 18.5 months). Peri-implant bone loss, pocket depth, Plaque Index values, Bleeding Index values, and Periotest values were evaluated. RESULTS: Overall, 2 maxillary implants were lost, for a cumulative survival rate of 98.3% (97.3% in the maxilla; 100% in the mandible). Mean peri-implant pocket depth (3.4 +/- 1.1 mm), bone resorption (1.4 +/- 1.2 mm), Periotest values (-4.3 +/- 3.1) as well as the Plaque Index and Bleeding Index (grades of 0 in 80% of cases) indicated acceptable results. DISCUSSION: The high survival rate may be attributed to avoidance of the use of short wide-diameter implants, and the primary intention to place wide-diameter implants. Preference of the molar region was a consequence of the peri-implant bone situation in the premolar region, which was frequently inadequate for a 5.5-mm implant. CONCLUSIONS: The use of wide-diameter implants can be a viable treatment option and may provide benefits in posterior regions for long-term maintenance of various implant-supported prosthetic rehabilitations. Some anatomic and prosthodontic limitations for the use of wide implants were     

ITI种植体早期负重与传统负重稳定性的比较

目的：应用共振频率分析评价早期负重种植体的稳定性,为种植体早期负重的可行性提供客观依据。方法：50例牙列缺损患者共植入104颗ITISLA表面实心螺纹种植体,随机分为2组,实验组为早期负重组,于术后6周修复;对照组为无负重组,于术后12周修复。在种植体植入术后当天、1周、4周、6周、8周、12周使用无线共振频率分析仪（Osstell Mentor）测定2组种植体的稳定性,所得参数为种植体稳定值（ISO）。采用Minitab统计软件对数据进行t检验．得出各时段2组ISQ值的P值。结果：术后12周,2组种植体的留存率均为100％,2组种植体在各时间段的ISQ值均无显著差异（P〉0．05）,整体变化趋势相同：表现为初期稳定性均较高,于第1周至第4周下降,第6周逐步上升,其后稳定性基本保持不变或略有上升。随访期（修复后6个月）间,2组种植体的留存率均为100％。结论：ITISLA表面种植体早期负载是可行的。     

Stability and marginal bone level measurements of unsplinted implants used for mandibular overdentures: a 1-year randomized prospective clinical study comparing early and conventional loading protocols

Objectives: The aim of this study was to compare the performance of two non‐splinted implants used as retention for a mandibular overdenture when applying conventional or early loading protocols. Material and methods: Twenty edentulous patients were treated with two unsplinted and non‐submerged implants (15 mm long, TiUnite RP, Brånemark System) in the anterior mandible. The patients were randomly allotted into two groups: (i) test group (Group A), in which the overdenture was connected 1 week after surgery, and (ii) control group (Group B), in which the overdenture was connected after 12 weeks of healing. Resonance frequency analyses (RFA) for implant stability measurements were performed at implant surgery and after 1, 3, 6, 9 and 12 months. Marginal bone levels were evaluated at implant surgery and after 6 and 12 months. Results: No implant from either group was lost and all implants showed less than 1 mm of marginal bone resorption during the first year. The mean implant stability quotient (ISQ) values at implant surgery were 76.2±2.8 for Group A and 75.6±4.5 for Group B. The 12‐month measurements showed 76.4±2.5 ISQ and 76.4±2.8 ISQ for Groups A and B, respectively. There were no statistically significant changes between or within the groups with time. There were no differences in marginal bone loss, which was on average 0.3 mm for both groups after 1 year. Conclusion: Although a limited number of patients were followed for 1 year only, the results of the present study indicate that early loading of two unsplinted 15 mm long implants with an overdenture does not negatively affect implant stability or marginal bone conditions when compared with implants subjected to 12 weeks of healing before loading.     

Implant stability measurement of delayed and immediately loaded implants during healing

The purpose of the present study was (1) to measure the primary stability of ITI implants placed in both jaws and determine the factors that affect the implant stability quotient (ISQ) determined by the resonance frequency method and (2) to monitor implant stability during the first 3 months of healing and evaluate any difference between immediately loaded (IL) implants and standard delayed loaded (DL) implants. The IL and DL groups consisted of 18 patients/63 implants and 18 patients/43 implants. IL implants were loaded after 2 days; DL implants were left to heal according to the one-stage procedure. The ISQ was recorded with an Osstell apparatus (Integration Diagnostics AB, Gothenburg, Sweden) at implant placement, after 1, 2, 4, 6, 8, 10 and 12 weeks. Primary stability was affected by the jaw and the bone type. The ISQ was higher in the mandible (59.8+/-6.7) than the maxilla (55.0+/-6.8). The ISQ was significantly higher in type I bone (62.8+/-7.2) than in type III bone (56.0+/-7.8). The implant position, implant length, implant diameter and implant deepening (esthetic plus implants) did not affect primary stability. After 3 months, the gain in stability was higher in the mandible than in the maxilla. The influence of bone type was leveled off and bone quality did not affect implant stability. The resonance-frequency analysis method did not reveal any difference in implant stability between the IL and DL implants over the healing period. Implant stability remained constant or increased slightly during the first 4-6 weeks and then increased more markedly. One DL and IL implant failed; both were 8 mm long placed in type III bone. At the 1-year control, the survival rate of the IL and the DL implants was 98.4% and 97.7%, respectively. This study showed no difference in implant stability between the IL and DL procedures over the first 3 months. IL short-span bridges placed in the posterior region and full arch rehabilitation of the maxilla with ITI sandblasted-and-etched implants were highly predictable.     

Resonance frequency analysis in immediate loading of dental implants

Immediate loading of dental implants aims to shorten treatment time. Stability at implant insertion is critical to success. The aim of this prospective study is to compare primary implant stability, measured by insertion torque (IT) with resonance frequency analysis (RFA) expressed as ISQ. Patients requiring implant therapy were treated by teeth extractions, placement of 1-9 MIS implants, bone augmentation as needed and fixed provisional restorations. We measured IT and ISQ for non-submerged loaded (NSL), non-submerged non loaded (NSNL) and submerged (S) implants. 14 patients, aged 34-79 years, were recruited. 53 implants were inserted (38 maxillary & 15 mandibular). 30 implants, 18 in fresh extraction sites, were immediately loaded. ISQ was 63.3 +/- 2.8 (S.E.), 67.2 +/- 3.5 (S.E.) and 58.8 +/- 2.7 for the NSL, NSNL and S groups, respectively (p = 0.0459). IT was 40.4 +/- 1.8 Ncm, 46 +/- 4.0 and 35.3 +/- 2.1 (p = 0.0646). ISQ and IT were not statistically different between extraction vs. non-extraction and augmented vs. non-augmented sites. We found a significant difference in IT between maxillary & mandibular sites, and a significant correlation between ISQ & IT and between ISQ & implant diameter. These data suggest that ISQ is correlated to IT and is influenced mainly by implant diameter and not by implant length, location or bone level. Finally, a case including immediate implants, bone augmentation and immediate provisional restoration is presented.     

A 10-year prospective study of ITI dental implants placed in the posterior region. I: Clinical and radiographic results

OBJECTIVES: To evaluate the long-term fixture success rate, crestal bone loss and peri-implant soft tissue parameters around ITI dental implants placed in the posterior region of partially edentulous patients. MATERIAL AND METHODS: A total of 192 ITI dental implants were consecutively placed in premolars and molars of 83 partially edentulous patients admitted for treatment at Geneva Dental School. All implants were restored by means of ceramic-to-metal fused fixed partial dentures and single crowns. Patients were followed as part of a prospective longitudinal study focusing on implant success. Surgical, radiographic and clinical variables were collected at the 1-year recall after implant placement and at the most recent clinical evaluation. RESULTS: The mean observation time was 6 years (range 5-10 years). Four implants failed, yielding a 10-year cumulative survival rate of 97.9%. The mean annual crestal bone loss was -0.04+/-0.2 mm. Hollow-cylinder implants displayed more crestal bone loss (-0.13+/-0.24 mm) than hollow-screw implants (-0.02+/-0.19 mm; P=0.032). Clinical parameters such as age, gender, implant length and bone quality did not affect crestal bone levels. Increase in recession depth (P=0.025) and attachment level (P=0.011) were significantly associated with crestal bone loss. CONCLUSIONS: ITI dental implants placed in the posterior jaw demonstrate excellent long-term clinical success. Hollow-cylinder implants seem to display a higher risk for crestal bone loss. Recession depth and attachment levels appear to be good clinical indicators of peri-implant bone loss.     

To splint or not to splint oral implants in the implant‐supported overdenture therapy? A systematic literature review

The objective of this systematic review was to assess the influence of splinted and unsplinted oral implants in the mandibular and maxillary implant-supported overdenture therapy, concerning the implant survival, the peri-implant parameters, the prosthetic complications and the patient satisfaction. An electronic MEDLINE search complemented by manual searching was conducted to identify randomized clinical trials, prospective and retrospective cohort studies on implant-supported overdentures with a mean follow-up of at least 3 years. Twelve studies from an initial yield of 1022 titles were finally selected and data were extracted. After an observation period of more than 3 years, there was no difference in implant survival rates between splinted and unsplinted design. From most of the investigations included in this study, it was mentioned that the unsplinted design needs more prosthetic maintenance. In more of the studies that were dealing with the satisfaction of the patients wearing implant-supported overdentures, no significant difference in the preference of the patients was reported. No significant difference in the peri-implant outcome between splinted and unsplinted design was found. Within the limits of this systematic review, it is concluded that there was no significant difference between the two different designs of implant-supported overdentures with respect to the soft tissue health status or patient satisfaction, although the bar-supported overdentures have been shown to need less prosthetic maintenance.