Pharyngeal airway space,hyoid bone position,and head posture after bimaxillary orthognathic surgery in Class III patients: Long-term evaluation

Objective:(1) To determine the effect of bimaxillary orthognathic surgery on pharyngeal airway, hyoid bone, and craniocervical posture in Class III bimaxillary surgery patients. (2) To evaluate short-term and long-term results. (3) To compare short- and long-term values.Materials and Methods:Twenty-six Class III adult patients treated with bimaxillary surgery were included in the study. Cephalometric records were taken before treatment (T1), before surgery (T2), and 5 months (T3), 1.4 years (T4), 3 years (T5), and 5 years (T6) postsurgery.Results:No significant differences were identified in craniocervical angulation between time intervals. There was a significant superior movement of hyoid bone at postsurgery (T3; P < .05); however, adaptation occurred to the normal position in the long term. A nonsignificant decrease occurred at the oropharyngeal middle pharyngeal distance parameter; however, this was compensated with a significant increase between T5 and T6 (P < .001). A significant decrease was observed in the hypopharyngeal Go-P parameter between T3 and T1 (P < .01), but it recovered with a nonsignificant increase in the long term. A significant increase in nasopharyngeal area was observed between T3 and T1 (P < .05). The hypopharyngeal area significantly increased between T5 and T6, and PNS-R significantly increased between T3 and T1 (P < .05).Conclusion:The pharyngeal areas adversely affected after surgery recover at long-term follow-up; thus, adaptation occurs after bimaxillary surgery.     

Pharyngeal airway space,hyoid bone position and head posture after orthognathic surgery in Class III patients

Objective:To determine the effect of orthognathic surgery on pharyngeal airway in Class III patients and to (1) compare the results of different surgical techniques, (2) determine the change at the position of the hyoid bone, and (3) evaluate the craniocervical posture changes related to pharyngeal airway change.Materials and Methods:Forty-eight Class III adult patients were included in the study to assess airway space after orthognathic surgery. Nine patients were treated with maxillary advancement, seven patients were treated with mandibular set back, and 32 patients were treated with bimaxillary surgery. Cephalometric records were taken before treatment, after surgery, and about 1 year after surgery (at the end of the treatment).Results:No differences were determined at the position of hyoid bone and craniocervical posture. Nasopharyngeal area was significantly increased in all groups (P < .05). Oropharyngeal area and SPSS and IPS parameters were significantly decreased after mandibular set back operation (P < .05). In bimaxillary and maxillary advancement groups, PPS parameter was significantly increased (P < .01), and IPS parameter was significantly decreased (P < .05). No differences were detected at oropharyngeal and hypopharyngeal areas in bimaxillary and maxillary advancement groups.Conclusion:Different surgical procedures have different effects on pharyngeal airway space.     

Masseter muscle changes following orthognathic surgery: A long-term three-dimensional computed tomography follow-up

Objective:To evaluate the long-term changes of masseter muscle morphology in skeletal Class III patients with facial asymmetry following two-jaw orthognathic surgery (Le Fort I osteotomy + intraoral vertical ramus osteotomy).Materials and Methods:Using computed tomography (CT), a longitudinal study was conducted on 17 skeletal Class III patients with facial asymmetry. Measurements from the reconstructed three-dimensional (3D) CT images were compared from T1 (before surgery), T2 (1 year after surgery), and T3 (4 years after surgery). The maximum cross-sectional area (CSA), orientation, thickness, and width of the masseter muscle were measured on both the deviated and nondeviated sides. The control group included 17 volunteers with skeletal and dental Class I relationships without dentofacial deformities.Results:At T1, there were no significant differences in CSA, thickness, or width of masseter muscle between the deviated and nondeviated sides. Masseter muscle orientation was significantly more vertical on the nondeviated side than on the deviated side at T1 (P < .01); no significant bilateral differences were noted at T2 and T3. At T1, masseter muscle measurements were significantly lower than controls (P < .01). During T1–T3, a significant increase was noted in CSA, thickness, and width (P < .01) of masseter muscle. At T3, no significant difference was noted between the study and control groups.Conclusion:After surgery, the masseter muscle measurements of skeletal Class III asymmetry patients showed no significant differences compared with the control group within the 4-year follow-up period, indicating adaptation to the new skeletal environments and increased functional demand.     

Three-dimensional changes of the hyoid bone and airway volumes related to its relationship with horizontal anatomic planes after bimaxillary surgery in skeletal Class III patients

Objective:To evaluate longitudinal changes of the hyoid bone position and pharyngeal airway space after bimaxillary surgery in mandibular prognathism patients.Materials and Methods:Cone-beam computed tomography scans were taken for 25 mandibular prognathism patients before surgery (T0), 2 months after surgery (T1), and 6 months after surgery (T2). The positional displacement of the hyoid bone was assessed using the coordinates at T0, T1, and T2. Additionally, the volume of each subject''s pharyngeal airway was measured.Results:The mean amount of posterior maxilla impaction was 3.76 ± 1.33 mm as the palatal plane rotated 2.04° ± 2.28° in a clockwise direction as a result of bimaxillary surgery. The hyoid bone moved backward (P < .05, P < .001) and downward (P > .05, P < .05) at 2 months and 6 months after surgery, while the total volume of the pharyngeal airway significantly decreased at the same time points (P < .001, P < .001). There was significant relationship between the changes of the hyoid bone position and airway volume at 2 months after surgery (P < .05). The change of the palatal plane angle was positively correlated to the decrease in the total airway volume (P < .001).Conclusions:The null hypothesis was rejected. The hyoid bone moved inferoposteriorly, and the pharyngeal airway volume decreased for up to 6 months after bimaxillary surgery. The decrease in the pharyngeal airway volume was correlated to the changes in the palatal plane inclination and the positional change of the hyoid bone.     

A pilot clinical study of Class III surgical patients facilitated by improved accelerated osteogenic orthodontic treatments

Objective:To evaluate if the improved accelerated osteogenic orthodontics (IAOO) procedure could speed Class III surgical patients'' preoperative orthodontic treatment duration and, if yes, to what extent. This study was also designed to determine whether or not an IAOO procedure affects the tooth-moving pattern during extraction space closure.Materials and Methods:The samples in this study consisted of 24 Class III surgical patients. Twelve skeletal Class III surgery patients served as an experimental group (group 1) and the others as a control group (group 2). Before treatment, the maxillary first premolars were removed. For group 1, after the maxillary dental arch was aligned and leveled (T2), IAOO procedures were performed in the maxillary alveolar bone. Except for this IAOO procedure in group 1, all 24 patients experienced similar combined orthodontic and orthognathic treatment. Study casts of the maxillary dentitions were made before orthodontic treatment (T1) and after extraction space closure (T3). All of the casts were laser scanned, and the amount of movement of the maxillary central incisor, canine, and first molar, as well as arch widths, were digitally measured and analyzed by using the three-dimensional model superimposition method.Results:The time durations T3–T2 were significantly reduced in group 1 by 8.65 ± 2.67 months and for T3–T1 were reduced by 6.39 ± 2.00 months (P < .001). Meanwhile, the tooth movement rates were all higher in group 1 (P < .05). There were no significant differences in the amount of teeth movement in the sagittal, vertical, and transverse dimensions between the two groups (P > .05).Conclusion:The IAOO can reduce the surgical orthodontic treatment time for the skeletal Class III surgical patient by more than half a year on average. The IAOO procedures do not save anchorage.     

Cranial base characteristics in anteroposterior malocclusions: A meta-analysis

Objective:To investigate cranial base characteristics in malocclusions with sagittal discrepancies.Materials and Methods:An electronic search was performed in PubMed, Embase, Web of Science, and the Cochrane Library. A fixed- or random-effect model was applied to calculate weighted mean difference with 95% confidence intervals (CIs) according to statistical heterogeneity. Outcome measures were anterior, posterior, and total cranial base length and cranial base angle. Sensitivity analysis and publication bias were conducted.Results:Twenty studies that together included 1121 Class I, 1051 Class II, and 730 Class III cases qualified for the final analysis. Class III malocclusion demonstrated significantly reduced anterior (95% CI: −1.74, −0.53; P < .001 vs Class I; 95% CI: −3.30, −2.09; P < .001 vs Class II) and total cranial base length (95% CI: −3.33, −1.36; P < .001 vs Class I; 95% CI: −7.38, −4.05; P < .001 vs Class II). Further, Class II patients showed significantly greater anterior and total cranial base length than did Class I patients (95% CI: 0.51, 1.87; P < .001 for SN; 95% CI: 2.20, 3.30; P < .001 for NBa). Cranial base angle was significantly smaller in Class III than in Class I (95% CI: −3.14, −0.93; P < .001 for NSBa; 95% CI: −2.73, −0.68; P  =  .001 for NSAr) and Class II malocclusions (95% CI: −5.73, −1.06; P  =  .004 for NSBa; 95% CI: −6.11, −1.92; P < .001 for NSAr) and greater in Class II than in Class I malocclusions (95% CI: 1.38, 2.38; P < .001 for NSBa).Conclusions:This meta-analysis showed that anterior and total cranial base length and cranial base angle were significantly smaller in Class III malocclusion than in Class I and Class II malocclusions, and that they were greater in Class II subjects compared to controls.     

Effectiveness of twin-block and Mandibular Protraction Appliance-IV in the improvement of pharyngeal airway passage dimensions in Class II malocclusion subjects with a retrognathic mandible

Objective:To test the hypothesis that twin-block and Mandibular Protraction Appliance-IV (MPA-IV) are not effective in improving the pharyngeal airway passage (PAP) dimensions among Class II malocclusion subjects with a retrognathic mandible.Materials and Methods:Eighty-three subjects ranging in age from 8 to 14 years were divided into four groups. Group I included 30 Class I malocclusion subjects (healthy controls); group II consisted of 16 Class II malocclusion subjects (Class II controls); group III had 16 subjects in whom Class II malocclusion was treated by MPA-IV; and the remaining 21 subjects formed group IV, whose Class II malocclusions were corrected by twin-block appliance. Lateral cephalograms recorded at the beginning of orthodontic treatment in group I subjects and at the beginning and end of follow-up/treatment with functional appliance in group II, III, and IV subjects were analyzed to determine the PAP dimensions. Paired t-test, one-way analysis of variance, and Tukey tests were applied for statistical analysis, and a P-value .05 was considered statistically significant.Results:Soft palate length was decreased significantly in group III (P < .05) and group IV (P < .001) subjects. Soft palate thickness in group IV subjects was increased significantly as compared to group II (P < .05) and group III (P < .01) subjects. The improvement in soft palate inclination in group III and group IV subjects was significant (P < .01). The oropharynx depth was increased significantly in group III (P < .05) and group IV (P < .001) subjects. The depth of the hypopharynx was increased significantly (P < .01) in group IV subjects.Conclusions:The twin-block appliance was more efficient than the MPA-IV in the improvement of PAP dimensions among Class II malocclusion subjects with retrognathic mandible.     

Effect of posterior impaction and setback of the maxilla on retropalatal airway and velopharyngeal dimensions after two-jaw surgery in skeletal Class III patients

Objective:To evaluate the changes in retropalatal airway and velopharyngeal dimensions after posterior impaction (PI) only or PI and setback (PI/SB) of the maxilla in patients with skeletal Class III undergoing two-jaw surgery.Materials and Methods:Subjects consisted of 60 Class III patients treated with two-jaw surgery. They were divided into two groups: group 1 (n  = 30; PI of the maxilla; mean  =  2.6 mm) and group 2 (n = 30; PI/SB of the maxilla; mean  =  2.8 mm and 1.8 mm, respectively). Using three dimensional computed tomography images taken 1month before surgery (T0) and at least 6 months after surgery (T1), retropalatal airway volume, minimum cross-sectional area, and lateral and anteroposterior (AP) dimensions of minimum cross-sectional area, soft palate angle, soft palate length, and pharyngeal depth were measured. A paired t-test and independent t-test were used for statistical analysis.Results:Group 1 showed increase in retropalatal airway volume and minimum cross-sectional area (P < .01 and P < .05, respectively). Group 2 exhibited decrease in retropalatal airway volume, minimum cross-sectional area, and lateral and AP dimensions of minimum cross-sectional area (all P < .01). Although groups 1 and 2 showed an increase in soft palate length (P < .01 and P < .001, respectively), pharyngeal depth significantly increased only in group 1 (P < .01). Groups 1 and 2 were significantly different in retropalatal airway volume, minimum cross-sectional area, and AP dimension (P < .05, P < .001, and P < .05, respectively).Conclusion:Because the direction of surgical movement in the maxilla can determine the changes in the retropalatal airway and velopharyngeal dimensions, it is recommended that clinicians investigate whether patients suffer from sleep-related breathing disorders before performing PI/SB of the maxilla.     

Duration of the Pubertal Peak in Skeletal Class I and Class III Subjects

Objective:To estimate and compare the duration of the pubertal growth peak in Class I and Class III subjects.Materials and Methods:The data examined consisted of pretreatment lateral cephalometric records of 218 skeletal Class I or Class III subjects (93 female and 125 male subjects) of white ancestry. The duration of the pubertal peak was calculated from the average chronological age intervals between stages CS3 and CS4 of the cervical vertebral maturation in Class I vs Class III groups (t-test).Results:In skeletal Class I subjects, the pubertal peak had a mean duration of 11 months, whereas in Class III subjects it lasted 16 months. The average difference (5 months) was statistically significant (P < .001).Conclusions:The growth interval corresponding to the pubertal growth spurt (CS3–CS4) was longer in Class III subjects than in subjects with normal skeletal relationships; the larger increases in mandibular length during the pubertal peak reported in the literature for Class III subjects may be related to the longer duration of the pubertal peak.     

Maxillary incisor inclination of skeletal Class III patients treated with extraction of the upper first premolars and two-jaw surgery: Conventional orthognathic surgery vs surgery-first approach

Objective:To investigate the differences in the amount and pattern of the maxillary incisor (MXI) inclination change in skeletal Class III patients treated with extraction of the maxillary first premolars (MXP1) and two-jaw surgery (TJS) between conventional orthognathic surgery (COS) and surgery-first approach (SFA).Materials and Methods:The study included 60 skeletal Class III patients who had normal maxillary position, prognathic mandible, and mild crowding in the maxillary arch (≤4 mm). The patients were divided into group 1 (COS, n  =  36) and group 2 (SFA, n  =  24). Lateral cephalograms were taken before treatment (T0), 1 month before surgery (T1), within 1 month after surgery (T2), and after debonding (T3) for COS patients and at T0, T2, and T3 for SFA patients. After measurement of the skeletodental variables, statistical analyses were performed.Results:During T0–T2, the amount of MXI inclination change (ΔU1-SN) in group 1 was significantly larger than that in group 2 (−12.8° vs −4.4°; P < .001). During T2–T3, ΔU1-SN in groups 1 and 2 occurred in opposite directions (3.8° vs −5.9°; P < .001). However, the total amount of ΔU1-SN during T0–T3 was not different between groups 1 and 2 (−9.0° vs −10.3°). At T3 the U1-SN values for groups 1 and 2, respectively, moved closer to normal according to the values of the normal range rate (all 83%), relative percentage ratio (102.4% and 100.1%), and achievement ratio (77.7% and 97.8%).Conclusions:The results of this study might provide basic data for predicting the amount and pattern of MXI inclination change in SFA for skeletal Class III TJS patients.     

Time and pattern of the fusion of the spheno-occipital synchondrosis in patients with skeletal Class I and Class III malocclusion

Objectives:To investigate the time and pattern of fusion of the spheno-occipital synchondrosis in patients with skeletal Class I and Class III malocclusion using cone-beam computed tomography (CBCT).Materials and Methods:A total of 262 CBCT images were collected: 140 skeletal Class I (0° < ANB < 4°; 71 males, 69 females) and 122 skeletal Class III (ANB ≤ 0°; 61 males and 61 females). The fusion stages were identified using CBCT images of a six-stage system defined by the appearance of osseous cores and ossifying vestige in the synchondrosis. The age distributions of each stage and the pattern of fusion were evaluated.Results:The stages of fusion progressed with increasing age (P < .05, r = .824), and the age distributions in the female groups were generally 1 to 3 years younger than those in the male groups. However, no significant differences were observed between the skeletal Class I and Class III groups regarding the time of ossification of the synchondrosis. The osseous cores appeared most frequently in the supero-center part, followed by the mid-center part of the synchondrosis.Conclusions:The time and pattern of fusion of the spheno-occipital synchondrosis are not apparently different between patients with Class I malocclusion and those with Class III malocclusion. The osseous cores appear frequently in the supero-center and mid-center of the synchondrosis with various patterns before the end of the pubertal growth spurt period.     

Fixed Orthodontic Appliance Therapy and Its Impact on Oral Health-Related Quality of Life in Chinese Patients

Objective:To determine changes in oral health-related quality of life (OHRQoL) during fixed orthodontic appliance therapy in Chinese patients.Materials and Methods:Two-hundred fifty Chinese orthodontic patients completed six distinct intervals of the 14-item Oral Health Impact Profile (OHIP-14, Chinese version): before treatment (T0); after the placement of the fixed appliance at 1 week (T1), 1 month (T2), 3 months (T3), and 6 months (T4); and posttreatment (T5).Results:The overall response rate was 88.8% (222 of 250). Significant differences of overall OHIP-14 scores could be found between any two time points (P < .001), except for between T0 and T2 (P > .05) and between T3 and T4 (P > .05). Overall scores at T1 were significantly higher than the scores at the other intervals (P < .001), with a significant change in the scores on physical pain (P < .001), psychological discomfort (P < .001), and physical disability (P < .001). Scores at T5 were lowest among the six time points (P < .001).Conclusions:Fixed orthodontic appliance therapy did affect Chinese patients'' OHRQoL. Patients were considerably compromised in terms of their overall OHRQoL until approximately 1 month after insertion. The severity of the compromised condition in terms of overall OHRQoL was greatest at 1 week with the reported impact on physical pain, psychological discomfort, and physical disability. Patients'' OHRQoL was better after they completed the orthodontic treatment than before or during treatment.     

A theoretical analysis of longitudinal temporomandibular joint compressive stresses and mandibular growth

ObjectivesTo determine if temporomandibular joint (TMJ) compressive stresses during incisor biting (1) differed between growing children over time, and (2) were correlated with Frankfort Horizontal-mandibular plane angle (FHMPA, °) and ramus length (Condylion-Gonion (Co-Go), mm).Materials and MethodsThree-dimensional anatomical geometries, FHMPA and Co-Go, were measured longitudinally from lateral and posteroanterior cephalographs1 of children aged 6 (T1), 12 (T2), and 18 (T3) years. Geometries were used in numerical models to estimate subject-specific TMJ eminence shape and forces for incisor bite-forces of 3, 5, and 8 Newtons at T1, T2, and T3, respectively. TMJ compressive stresses were estimated via two steps: First, TMJ force divided by age-dependent mandibular condylar dimensions, and second, modified by loading surfaces'' congruency. Analysis of variance and Tukey honest significant difference post-hoc tests, plus repeated measures and mixed effects model analyses were used to evaluate differences in variables between facial groups. Regression analyses tested for correlation between age-dependent compressive stresses, FHMPA, and Co-Go.ResultsSixty-five of 842 potential subjects had T1-T3 cephalographs and were grouped by FHMPA at T3. Dolichofacial (FHMPA ≥ 27°, n = 36) compared to meso-brachyfacial (FHMPA< 27°, n = 29) subjects had significantly larger FHMPA at T1-T3, shorter Co-Go at T2 and T3 (all P < .01), and larger increases in TMJ compressive stresses with age (P < .0001). Higher compressive stresses were correlated with larger FHMPA (all R² ≥ 0.41) and shorter Co-Go (all R² ≥ 0.49).ConclusionsEstimated TMJ compressive stress increases from ages 6 to 18 years were significantly larger in dolichofacial compared to meso-brachyfacial subjects and correlated to FHMPA and Co-Go.     

Asymmetric dental arch treatment with Forsus fatigue appliances: Long-term results

Objectives:To investigate the treatment efficacy and follow-up stability of the asymmetric Forsus appliance by evaluating longitudinal changes in dental arch asymmetry on digital dental models from 21 patients.Materials and Methods:Maxillary and mandibular reference lines were used for measurements of intra-arch asymmetry at pretreatment (T1), posttreatment (T2), and 4.2 years after treatment (T3). Maxillary and mandibular measurements were performed relative to the dental midline and anterior reference line on digital dental models. To determine the amount of asymmetry between the Class I and Class II sides of a given arch, all maxillary and mandibular parameters were measured on each side of the model separately. Repeated-measures analysis of variance/paired sample t-tests were performed to evaluate dental arch asymmetries at the P < .05 level.Results:The alveolar transverse dimensions of the posterior segment of both arches were increased during treatment (P < .05) and remained stable during the retention period. Class II subdivision malocclusion was caused by distal positioning of the mandibular canine, premolars, and first molar on the Class II side (P < .05). Asymmetry was resolved by treatment with asymmetric Forsus appliances. The resolved asymmetry remained stable over the long term. There were no significant differences between T2 and T3 (P > .05).Conclusions:The asymmetric Forsus appliance can be used to treat dental arch asymmetry in patients with Class II subdivision malocclusions.     

Factors associated with long-term patient satisfaction

Objective:To identify factors associated with patient satisfaction at least 5 years after orthodontic treatment.Materials and Methods:A total of 209 orthodontic patients were included in the study. All subjects were treated with upper and lower fixed orthodontic appliances. Dental casts (n  =  627) were examined using the Peer Assessment Rating (PAR) Index pretreatment (T1), at the end of treatment (T2) and at a long-term follow-up (mean, 8.5 years; T3). At T3, a Dental Impact on Daily Living questionnaire was used to assess the long-term effects of orthodontic treatment on daily living and satisfaction with the dentition. Multiple regression analyses were used to quantify associations between patient satisfaction and changes produced by the orthodontic treatment (PAR T2-T1), posttreatment stability (PAR T3), age at the start of treatment (T1), treatment duration (T2-T1), gender, and extraction.Results:Orthodontic treatment produced a significant improvement of 94.2% in the PAR Index (T2-T1), but this change was not associated with the level of satisfaction when the patient was questioned at least 5 years after treatment. Regression analysis showed that satisfaction was significantly associated only with the long-term posttreatment PAR index (r²  =  0.125, P < .0001). No significant association was observed with the severity of malocclusion at the beginning (PAR-T1) or end of the orthodontic treatment (PAR-T2), age at T1, the amount of time taken during orthodontic treatment, gender, or extraction.Conclusions:Over the long term, patient satisfaction is slightly associated with the stability of the orthodontic treatment regardless of the initial occlusal condition or the final result of the orthodontic treatment.     

Effect of post–orthognathic surgery condylar axis changes on condylar morphology as determined by 3-dimensional surface reconstruction

Objective: To evaluate the effect of postoperative condylar axis changes on mandibular condylar remodeling by comparing the condylar head in three-dimensional (3D) surface reconstructions before and after surgery in skeletal Class III deformities (one-jaw [mandibular setback] or two-jaw surgery), and also to determine the relationship between condylar inward rotation and condylar surface remodeling after orthognathic surgery.Materials and Methods:A retrospective analysis was conducted of 30 patients with skeletal Class III deformities who had received orthognathic surgery. Group 1 underwent one-jaw surgery (10 men, five women, age 22.4 ± 3.3 years), and group 2 underwent two-jaw surgery (10 men, five women, age 22.3 ± 2.2 years). Sixty condyles were reconstructed and superimposed pre- and postoperatively to compare the changes of condylar surfaces. The relation between the condylar axis change and the surface change using the Pearson correlation were investigated from the 3D image software.Results:Condylar surface changes before and after the surgery were significant. The postoperative inward rotation of the condyles was correlated with the average absolute deviation of the condyles, regardless of the surgery type (one- or 2-jaw surgery; r  =  .70, P < .05).Conclusion:After orthognathic surgery, condylar surface changes occurred, and condylar inward rotation was closely related to changes of condylar surface.     

Cervical vertebra morphology in different skeletal classes: A Three-Dimensional Computed Tomography Evaluation

Objective:To describe cervical vertebra morphology in subjects with different anteroposterior jaw relationships.Materials and Methods:Cone-beam computed tomography images of 31 female subjects aged 19 to 41 years were evaluated. Subjects constituted two groups according to the ANB angle: group 1, skeletal Class II (ANB angle >5); and group 2, skeletal Class III (ANB angle <1). Nine linear measurements and one angular measurement were used to assess the vertebral morphology. The Mann-Whitney U-test was used for statistical analysis.Results:The mean atlas dorsal arch height was significantly shorter in Class II subjects compared with those in Class III (P < .05). The cervical vertebra morphological analysis by cone-beam computed tomography was of comparable precision to three-dimensional computed tomography evaluations. This study confirmed previous findings that Class II subjects have significantly lower atlas dorsal arch heights.Conclusion:The height of the atlas dorsal arch of cervical vertebrae is affected by the anteroposterior skeletal pattern.     

Impact of orthognathic surgery on the prevalence of dehiscence in Class II and Class III surgical-orthodontic patients:: A cone beam computed tomographic study

ObjectivesThe objectives were to evaluate and compare the presence of bone dehiscence before and after orthognathic surgery.Materials and MethodsIn this retrospective study, 90 cone-beam computed tomography (CBCT) scans from 45 patients were evaluated. Class II (n = 23) and Class III (n = 22) orthodontic patients who were being prepared for orthognathic surgery were measured. CBCT scans were obtained about 30 days prior to (T0) and 6 months after (T1) double jaw orthognathic surgery. The distance between the cemento-enamel junction (CEJ) and the alveolar bone crest was assessed at the buccal and lingual surfaces of all teeth, on both sides and arches, except for the second premolars and the second and third molars. A total of 1332 sites were measured for Class II (644) and Class III (688) patients. The software used was OsiriX (version 3.3 32-bit). Data were compared with Wilcoxon and McNemar tests at the 5% level.ResultsBone dehiscence before surgery was present in 26% and 15% of the Class II and III groups, respectively. The presence of dehiscence increased to 31% in the Class II and 20% in the Class III patients after surgery (P < .05).ConclusionsThe prevalence of dehiscence increased slightly in Class II and Class III surgical-orthodontic patients after orthognathic surgery. Temporary vascular supply reduction and oral hygiene difficulties may explain these results; however, more studies are needed.     

Three-dimensional evaluation of soft tissue change gradients after mandibular setback surgery in skeletal Class III malocclusion

Objective:To evaluate whether mandibular setback surgery (MSS) for Class III patients would produce gradients of three-dimensional (3D) soft tissue changes in the vertical and transverse aspects.Materials and Methods:The samples consisted of 26 Class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalograms and 3D facial scan images were taken before and 6 months after MSS, and changes in landmarks and variables were measured using a Rapidform 2006. Paired and independent t-tests were performed for statistical analysis.Results:Landmarks in the upper lip and mouth corner (cheilion, Ch) moved backward and downward (respectively, cupid bow point, 1.0 mm and 0.3 mm, P < .001 and P < .01; alar curvature-Ch midpoint, 0.6 mm and 0.3 mm, both P < .001; Ch, 3.4 mm and 0.8 mm, both P < .001). However, landmarks in stomion (Stm), lower lip, and chin moved backward (Stm, 1.6 mm; labrale inferius [Li], 6.9 mm; LLBP, 6.9 mm; B′, 6.7 mm; Pog′, 6.7 mm; Me′, 6.6 mm; P < .001, respectively). Width and height of upper and lower lip were not altered significantly except for a decrease of lower vermilion height (Stm-Li, 1.7 mm, P < .001). Chin height (B′-Me′) was decreased because of backward and upward movement of Me′ (3.1 mm, P < .001). Although upper lip projection angle and Stm-transverse projection angle became acute (Ch_Rt-Ls-Ch_Lt, 5.7°; Ch_Rt-Stm-Ch_Lt, 6.4°, both P < .001) because of the greater backward movement of Ch than Stm, lower lip projection angle and Stm-vertical projection angle became obtuse (Ch_Rt-Li-Ch_Lt, 10.8°; Ls-Stm-Li, 23.5°, both P < .001) because of the larger backward movement of Li than labrale superius (Ls).Conclusions:Three-dimensional soft tissue changes in Class III patients after MSS exhibited increased gradients from upper lip and lower lip to chin as well as from Stm to Ch.     

Three-dimensional alterations in pharyngeal airspace,soft palate,and hyoid bone of class II and class III patients submitted to bimaxillary orthognathic surgery: A retrospective study

IntroductionThe aim of this retrospective study was to evaluate changes in pharyngeal airway space (PAS), soft palate, and hyoid bone position after bimaxillary orthognathic surgery in skeletal Class II and Class III patients.MethodsPatients were divided into Group 1: Class III patients who underwent maxillary osteotomies and mandibular setback surgery (N = 43); and Group 2: Class II patients who underwent maxillomandibular advancement surgery (N = 36). Cone beam computed tomography (CBCT) images were acquired one month before and six to eight months after orthognathic surgery. PAS area, volume and minimum axial area (MAA), soft-palate morphology, and hyoid bone position measurements obtained before and after orthognathic surgery were compared using the Gamma family test (p ≤ 0.10).ResultsIn Class II group the maxillomandibular advancement surgery significantly increased the PAS area, volume, and MAA and significantly affected hyoid bone position and soft-palate morphology. In Class III group, maxillary osteotomies and mandibular setback also showed increase in PAS area, however without statistically significant values for most of the evaluated measurements.ConclusionThe results of the present study indicate that PAS and related structures are expected to be improved in Class II patients submitted to bimaxillary surgery, and they are not negatively affected by bimaxillary surgery in Class III patients.