Physicochemical characterization and dissolution of norfloxacin/cyclodextrin inclusion compounds and PEG solid dispersions

Increase in the poor water solubility and dissolution rate of norfloxacin was studied. Two systems were used: solid dispersion with PEG 6000 prepared using the fusion method and inclusion complexes with cyclodextrins (β-cyclodextrin and HP-β-cyclodextrin) obtained by freeze-drying. IR spectrophotometry, X-ray diffractometry, and differential scanning calorimetry showed differences between norfloxacin/cyclodextrin complexes and their corresponding physical mixtures, but not between norfloxacin/PEG 6000 solid dispersions and their corresponding physical mixtures. The solubility and dissolution rate of norfloxacin were significantly increased with PEG solid dispersions and cyclodextrin complexes as well as with norfloxacin-CD physical mixtures. However, enhancement was not statistically different either among various cyclodextrin complexes, or between solid dispersions and cyclodextrin complexes.     

羟丙基-β-环糊精包合对穿心莲内酯的增溶作用

目的研究羟丙基-β-环糊精(HP-β-CD)包合对穿心莲内酯(AND)溶解度和溶出度的增强作用。方法以HP-β-CD为载体,分别采用研磨法、超声波法和共沉淀法制备AND的HP-β-CD包合物,测定其溶出度和溶解度,并与AND原药、AND和HP-β-CD的物理混合物的溶出性能进行比较。结果 AND与HP-β-CD形成了包合物,HP-β-CD可使AND溶解度增加55.4倍。结论HP-β-CD极大地增加了AND的溶解度和溶出度。     

卡维地洛羟丙基-β-环糊精包合物的制备与评价

目的制备卡维地洛羟丙基-β-环糊精包合物,对包合物进行物性研究。方法采用超声法制备包合物,通过相溶解度研究包合类型,以差示扫描热分析法(DSC)和X-射线衍射法验证卡维地洛羟丙基-β-环糊精包合物的形成,并测定包合物的溶解度和溶出度。结果相溶解度曲线呈AL型,表明卡维地洛能够与羟丙基-β-环糊精形成1∶1的包合物。DSC和X-射线衍射结果显示药物峰消失,证明包合物的形成。包合物的溶解度比原药提高5倍,溶出速度明显加快。结论超声法制备的卡维地洛羟丙基-β-环糊精包合物能显著提高原药的溶解度和溶出速度。     

布格呋喃固体分散体的体外研究

布格呋喃(buagafuran,AF-5)是以( )香芹酮为起始原料通过立体选择性合成的沉香呋喃类化合物[1].它具有显著的抗焦虑作用,毒副作用低,市场前景广阔.布格呋喃为油状液体,脂溶性强,不溶于水.用植物油稀释进行小鼠灌胃,抗焦虑活性与空白组比较无统计学意义,不能较好地发挥药效.室温放置易发生降解,化学稳定性差.这些缺     

羟丙基-β-环糊精对兰索拉唑的增溶作用及其包合物的制备

目的研究羟丙基-β-环糊精(HP--βCD)对难溶性药物兰索拉唑(LPZ)的包合作用。方法绘制相溶解度图,考察pH变化、碳酸氢钠的加入对LPZ的增溶作用。采用共蒸发法(CE)和喷雾干燥法(SD)按照LPZ∶HP--βCD量比为1∶1或1.0∶1.5的比例制备LPZ/HP--βCD包合物,测定其溶出度,并利用差示扫描量热法(DSC)和傅立叶红外光谱法(FTIR)对SD法制备的包合物进行结构表征。结果在pH 11条件下,HP-β-CD与NaHCO3对LPZ的协同增溶效果最好。体外溶出实验表明:CE法和SD法制备的包合物溶出均优于LPZ与HP-β-CD的物理混合物。结论HP--βCD能明显提高LPZ的溶解度和溶出度。     

Improving the solubility of ampelopsin by solid dispersions and inclusion complexes

The aim of this study was to increase the solubility of ampelopsin (AMP) in water by two systems: solid dispersions with polyethylene glycol 6000 (PEG 6000) or polyvinylpyrrolidone K-30 (PVP K30) and inclusion complexes with beta-cyclodextrin (BCD) and hydroxypropyl-beta-cyclodextrin (HPBCD). The interaction of AMP with the hydrophilic polymers was evaluated by differential scanning calorimetry (DSC), Fourier transformation-infrared spectroscopy (FTIR), scanning electron microscopy (SEM). The results from DSC, FTIR and SEC analyses of solid dispersions and inclusion complexes showed that AMP might exist as an amorphous state or as a solid solution. On the other hand, the SEM images of the physical mixtures revealed that to some extent the drug was present in a crystalline form. The influence of various factors (pH, temperature, type of polymer, ration of the drug to polymer) on the solubility and dissolution rate of the drug were also evaluated. The solubility and dissolution rates of AMP were significantly increased by solid dispersions and cyclodextrin complexes as well as their physical mixtures. The improvement of solubility using polymers was in the following order: HPBCD approximately BCD>PVP K30>PEG 6000.     

Improvement of the dissolution kinetics of SR 33557 by means of solid dispersions containing PEG 6000

Solid dispersions of SR 33557 in preparations containing from 30 to 80% w/w polyethylene glycol 6000 (PEG 6000) were prepared by the fusion method. The solubility of the drug substance either alone or in solid dispersions was determined in pH 1.2 and 4.5 media (extraction fluid NFXII, without enzyme). A large increase in the solubility was noted from the 80% w/w PEG preparation. A wettability study performed by measuring the contact angle on tablets of either drug substance or PEG 6000, or solid dispersions, revealed a minimal contact angle for the 80% w/w PEG 6000 solid dispersion (eutectic composition of SR 33557/PEG 6000 phase diagram). Dissolution kinetic analysis performed at pH 1.2 on all solid dispersions, on the physical mixtures containing 70 and 80% w/w PEG 6000, and on SR 33557 alone, showed a maximum release rate (100%) for the solid dispersions containing 70 and 80% w/w PEG 6000. The dissolution rate of the physical mixtures was faster than that of the drug substance alone but remained, however, lower than that of the solid dispersions, at the same composition. It was also observed that the dissolution rate, at pH 1.2 and 4.5, of the 70% w/w PEG 6000 solid dispersion was practically pH independent, which was not the case for the drug substance alone. The latter solid dispersion showed a slowing down of the dissolution kinetics after 3 months storage at 50°C whereas no change in the dissolution rate was observed following storage for 12 months at 25°C.     

杨梅素固体分散体的制备以及体外溶出试验

目的运用固体分散技术制备杨梅素固体分散体并提高其体外溶出速率。方法选用PEG6000和PVPK30为载体,采用溶剂法和溶剂-熔融法制备杨梅素固体分散体,采用紫外分光光度法进行含量测定,并进行溶解度、体外溶出试验。结果两种载体的固体分散体均能增加药物的溶解度和溶出速率,杨梅素在载体中以高度分散状态存在。结论以PVPK30为载体的杨梅素固体分散体体外溶解度和溶出速率明显提高。杨梅素固体分散体能显著提高杨梅素的溶出速率。     

缬沙坦固体分散体的制备及体外溶出度研究

目的采用冷冻干燥法制备缬沙坦（Valsartan）速释固体分散体（SD）来提高其体外溶出度。方法分别以羟丙甲基纤维素（HPMC）、聚乙二醇6000（PEG6000）、聚乙烯吡咯烷酮k30（PVPk30）为载体,十二烷基硫酸钠（SDS）为表面活性剂来制备不同比例的缬沙坦固体分散体,通过测定体外溶出度,来选择最优辅料及比例,结果当以PEG6000载体,SDS为表面活性剂时,且药物：PEG6000：SDS=1：5：1％时药物呈现了很好的水溶性。结论在5min时即可溶出90％以上,很大程度上提高了缬沙坦的体外溶出度。     

Enhanced solubility and permeability of exemestane solid dispersion powders for improved oral delivery

The aim of the present investigation was to enhance the solubility of exemestane (EXM), by solid dispersion (SD) technique using PEG 6000 as a carrier. Phase solubility studies were conducted with PEG 6000 and PEG 20000 to evaluate the effect of carriers on aqueous solubility of EXM. The aqueous solubility of EXM was favoured with PEG 6000 compared to PEG 20000. SDs of EXM using polyethylene glycol 6000 (PEG 6000) as carrier were prepared in different drug to carrier ratios. Solid-state characterization indicated decrease in crystallinity of the drug. The in vitro dissolution rate of EXM was enhanced from both SDs and tablet formulations prepared using SD compared to pure EXM. The in situ permeability studies investigated using single-pass intestinal perfusion technique in rats revealed increase in effective intestinal permeability (P_eff, cm/s) by 4.45 folds with SDs. Thus, EXM-PEG 6000 SDs showed improved solubility and permeability.     

Preparation,characterization, dissolution,and permeation of flibanserin − 2-HP-β-cyclodextrin inclusion complexes

Flibanserin (FLB), an antiserotonin drug, is used to treat women with hypoactive sexual appetite disorder. FLB shows low bioavailability (~33%) probably due to its low water solubility. The current study investigated the impact of hydroxypropyl-β-cyclodextrin (HP-β-CD) and sodium lauryl sulfate (SLS) on the dissolution and permeation of FLB. HP-β-CD–FLB inclusion complexes were prepared using physical mixing and kneading at 1:1 and 1:2 M ratios and characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy, and powder X-ray diffractometry. The dissolution and permeation of the complexes through a cellophane membrane were performed in, 0.1, 0.3 and 0.5% SLS in phosphate buffer (pH 6.8).Derived from the slope of the linear phase solubility diagram, the apparent stability constant (K_1:1) was 372.54 M⁻¹. Kneading changed the crystalline form of FLB to an amorphous appearance characterized by minimal crystalline peaks, indicating successful inclusion complex formation. In addition, the HP-β-CD–FLB inclusion complexes showed twofold increased dissolution efficiency at 6 h. The cumulative FLB amount permeated at 6 h increased from 14.1% to 21.88% and 34.56% in the presence of 0.1% and 0.3% of SLS, respectively. However, increasing SLS to 0.5% did not show an increase in FLB permeation. Therefore, the HP-β-CD–FLB inclusion complex has an improved dissolution rate compared to FLB alone. The presence of SLS in the dissolution medium increases the dissolution rate of pure FLB and its complex with HP-β-CD. kneaded 1:1 complex was formulated bioadhesive buccal tablets and showed enhanced drug release.     

Inclusion complexes of tadalafil with natural and chemically modified β-cyclodextrins. I: Preparation and in-vitro evaluation

The aim of this work was to investigate the inclusion complexation between tadalafil, a practically insoluble selective phosphodiesterase-5 inhibitor (PDE5), and two chemically modified β-cyclodextrins: hydroxypropyl-β-cyclodextrin (HP-β-CD) and heptakis-[2,6-di-O-methyl]-β-cyclodextrin (DM-β-CD), in comparison with the natural β-cyclodextrin (β-CD) in order to improve the solubility and the dissolution rate of the drug in an attempt to enhance its bioavailability. Inclusion complexation was investigated in both the solution and the solid state. The UV spectral shift method indicated guest–host complex formation between tadalafil and the three cyclodextrins (CDs). The phase solubility profiles with all the used CDs were classified as A_p-type, indicating the formation of higher order complexes. The complexation efficiency values (CE), which reflect the solubilizing power of the CDs towards the drug, could be arranged in the following order: DM-β-CD > HP-β-CD > β-CD. Solid binary systems of tadalafil with CDs were prepared by kneading and freeze-drying techniques at molar ratios of 1:1, 1:3 and 1:5 (drug to CD). Physical mixtures were prepared in the same molar ratios for comparison. Physicochemical characterization of the prepared systems at molar ratio of 1:5 was studied using differential scanning calorimetry (DSC), X-ray diffractometry (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results showed the formation of true inclusion complexes between the drug and both HP-β-CD and DM-β-CD using the freeze-drying method at molar ratio of 1:5. In contrast, crystalline drug was detectable in all other products. The dissolution of tadalafil from all the prepared binary systems was carried out to determine the most appropriate CD type, molar ratio, and preparation technique to prepare inclusion complexes to be used in the development of tablet formulation for oral delivery of tadalafil. The dissolution enhancement was increased on increasing the CD proportion in all the prepared systems. Both the CD type and the preparation technique played an important role in the performance of the system. Irrespective of the preparation technique, the systems prepared using HP-β-CD and DM-β-CD yielded better performance than the corresponding ones prepared using β-CD. In addition, the freeze-drying technique showed superior dissolution enhancement than other methods especially when combined with the β-CD derivatives.     

Physicochemical characterization and in vivo properties of Zolpidem in solid dispersions with polyethylene glycol 4000 and 6000.

Solid dispersions and physical mixtures of Zolpidem in polyethylene glycol 4000 (PEG 4000) and 6000 (PEG 6000) were prepared with the aim to increase its aqueous solubility. These PEG based formulations of the drug were characterized in solid state by FT-IR spectroscopy, X-ray powder diffraction, and differential scanning calorimetry. By these physical determinations no drug-polymer interactions were evidenced. Both solubility and dissolution rate of the drug in these formulations were increased. Each individual dissolution profile of PEG based formulation fitted Baker-Lonsdale and first order kinetic models. Finally, significant differences in ataxic induction time were observed between Zolpidem orally administered as suspension of drug alone and as solid dispersion or physical mixture. These formulations, indeed, showed almost two- to three-fold longer ataxic induction times suggesting that, in the presence of PEG, the intestinal membrane permeability is probably the rate-limiting factor of the absorption process. Copyright     

Physicochemical characterization of solid dispersions of the antiviral agent UC-781 with polyethylene glycol 6000 and Gelucire 44/14

The purpose of this study was to prepare and characterize solid dispersions of the antiviral thiocarboxanilide UC-781 with PEG 6000 and Gelucire 44/14 with the intention of improving its dissolution properties. The solid dispersions were prepared by the fusion method. Evaluation of the properties of the dispersions was performed using dissolution studies, differential scanning calorimetry, Fourier-transform infrared spectroscopy and X-ray powder diffraction. To investigate the possible formation of solid solutions of the drug in the carriers, the lattice spacings [d] of PEG 6000 and Gelucire 44/14 were determined in different concentrations of UC-781. The results obtained showed that the rate of dissolution of UC-781 was considerably improved when formulated in solid dispersions with PEG 6000 and Gelucire 44/14 as compared to pure UC-781. From the phase diagrams of PEG 6000 and Gelucire 44/14 it could be noted that up to approximately 25% w/w of the drug was dissolved in the liquid phase in the case of PEG 6000 and Gelucire 44/14. The data from the X-ray diffraction showed that the drug was still detectable in the solid state below a concentration of 5% w/w in the presence of PEG 6000 and Gelucire 44/14, while no significant changes in the lattice spacings of PEG 6000 or Gelucire 44/14 were observed. Therefore, the possibility of UC-781 to form solid solutions with the carriers under investigation was ruled out. The results from infrared spectroscopy together with those from X-ray diffraction and differential scanning calorimetry showed the absence of well-defined drug–polymer interactions.     

Development of orally disintegrating tablets of Perphenazine/hydroxypropyl-β-cyclodextrin inclusion complex

The aim of the present work was to prepare perphenazine (PPZ) orally disintegrating tablets (ODTs) based on the use of hydroxypropyl-β-cyclodextrin (HP-β-CD) forming inclusion complex with PPZ to improve the solubility and dissolution of this practically insoluble drug. Phase solubility studies were performed to evaluate the complexation of PPZ with HP-β-CD in three aqueous systems. The inclusion complex prepared by evaporation method was characterized by different physicochemical techniques, including the dissolution studies. The prepared complex was incorporated into ODTs containing different fillers and disintegrants. The ODTs prepared by direct compression were evaluated for drug content, hardness, porosity, friability, in vitro disintegration time (DT), wetting time (WT) and dissolution profiles. The solubility and dissolution rate were substantially improved compared with that of PPZ. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) analyses suggested that PPZ could form true inclusion complex with HP-β-CD. The optimized formulation F6 exhibited short DT (15.5 ± 1.9 s) and WT (34.2 ± 2.3 s), sufficient hardness (30.4 ± 1.6 N/mm) and rapid drug dissolution. The developed tablet formulation could be a promising drug delivery system with improvements in PPZ bioavailability and patient compliance.     

Physical Stability of Solid Dispersions Containing Triamterene or Temazepam in Polyethylene Glycols

The effect of storage on the physical stability of solid dispersions of triamterene or temazepam in polyethylene glycols was studied using differential scanning calorimetry (DSC), particle-size analysis and dissolution methods. The enthalpies of fusion of the carriers, without included drug and previously fused and crystallized, increased on storage. Analysis of similarly treated solid dispersions, containing either 10% temazepam or 10% triamterene, showed that each drug influenced the morphology of the polyethylene glycol (PEG). The enthalpies and melting points of the solidus components of the dispersions' carriers were initially reduced after preparation, but on storage these increased. The particle sizes of the drugs dispersed in the PEGs increased on storage. The changes in dissolution after storage of triamterene or temazepam dispersions were smaller for dispersions in PEG 1500 than for dispersions in PEGs of higher molecular weight (PEG 2000, PEG 4000 or PEG 6000) in which the reduction in dissolution was particularly marked during the first month of storage. The rank order of changes in dissolution were PEG 1500 ? PEG 2000 < PEG 4000 ～ PEG 6000.     

Enhanced solubility and dissolution rate of lamotrigine by inclusion complexation and solid dispersion technique

The solid-state properties and dissolution behaviour of lamotrigine in its inclusion complex with beta-cyclodextrin (betaCD) and solid dispersions with polyvinylpyrrolidone K30 (PVP K30) and polyethyleneglycol 6000 were investigated. The phase solubility profile of lamotrigine with betaCD was classified as AL-type, indicating formation of a 1:1 stoichiometry inclusion complex, with a stability constant of 369.96+/-2.26 M(-1). Solvent evaporation and kneading methods were used to prepare solid dispersions and inclusion complexes, respectively. The interaction of lamotrigine with these hydrophilic carriers was evaluated by powder X-ray diffractometry, Fourier transform infrared spectroscopy and differential scanning calorimetry. These studies revealed that the drug was no longer present in crystalline state but was converted to an amorphous form. Among the binary systems tested, PVP K30 (1:5) showed greatest enhancement of the solubility and dissolution of lamotrigine.     

Mechanism of increased dissolution of diazepam and temazepam from polyethylene glycol 6000 solid dispersions

Solid dispersion literature, describing the mechanism of dissolution of drug-polyethylene glycol dispersions, still shows some gaps; (A). only few studies include experiments evaluating solid solution formation and the particle size of the drug in the dispersion particles, two factors that can have a profound effect on the dissolution. (B). Solid dispersion preparation involves a recrystallisation process (which is known to be highly sensitive to the recrystallisation conditions) of polyethylene glycol and possibly also of the drug. Therefore, it is of extreme importance that all experiments are performed on dispersion aliquots, which can be believed to be physico-chemical identical. This is not always the case. (C). Polyethylene glycol 6000 (PEG6000) crystallises forming lamellae with chains either fully extended or folded once or twice depending on the crystallisation conditions. Recently, a high resolution differential scanning calorimetry (DSC)-method, capable of evaluating qualitatively and quantitatively the polymorphic behaviour of PEG6000, has been reported. Unraveling the relationship between the polymorphic behavior of PEG6000 in a solid dispersion and the dissolution characteristics of that dispersion, is a real gain to our knowledge of solid dispersions, since this has never been thoroughly investigated. The aim of the present study was to fill up the three above mentioned gaps in solid dispersion literature. Therefore, physical mixtures and solid dispersions were prepared and in order to unravel the relationship between their physico-chemical properties and dissolution characteristics, pure drugs (diazepam, temazepam), polymer (PEG6000), solid dispersions and physical mixtures were characterised by DSC, X-ray powder diffraction (Guinier and Bragg-Brentano method), FT-IR spectroscopy, dissolution and solubility experiments and the particle size of the drug in the dispersion particles was estimated using a newly developed method. Addition of PEG6000 improves the dissolution rate of both drugs. Mechanisms involved are solubilisation and improved wetting of the drug in the polyethylene glycol rich micro-environment formed at the surface of drug crystals after dissolution of the polymer. Formulation of solid dispersions did not further improve the dissolution rate compared with physical mixtures. X-ray spectra show that both drugs are in a highly crystalline state in the solid dispersions, while no significant changes in the lattice spacings of PEG6000 indicate the absence of solid solution formation. IR spectra show the absence of a hydrogen bonding interaction between the benzodiazepines and PEG6000. Furthermore, it was concluded that the reduction of the mean drug particle size by preparing solid dispersions with PEG6000 is limited and that the influence of the polymorphic behavior of PEG6000 (as observed by DSC) on the dissolution was negligible.     

Solid state studies of drug–cyclodextrin inclusion complexes in PEG 6000 prepared by a new method

The melting method was investigated as a possible method for producing drug–cyclodextrin (CD) inclusion compounds in a carrier. Various solid dispersions of -, β- and γ-CD in polyethylene glycol (PEG) 6000 with and without the addition of 5% w/w indomethacin or griseofulvin were prepared using the original components. Characterisations of the samples included X-ray powder diffraction, modulated-temperature differential scanning calorimetry and dissolution tests by the paddle method according to USP XXI standard. Evidence of a complex between indomethacin and β-CD in PEG 6000 was found. An indomethacin–γ-CD complex formed a well defined phase in the PEG carrier, with tetragonal structure and unit cell parameters a=23.885(35) Å and c=23.181(64) Å. No complexation of indomethacin with -CD, or with griseofulvin and β-CD could be detected. It is suggested that competition between PEG and the drug for the binding to different CDs along with varying patterns of water loss from the CDs influence the inclusion reaction. The formation of complexes was accompanied by a decrease in the relative crystallinity of the dispersions. Dissolution tests showed that the CDs have a delaying effect on the release of indomethacin from PEG 6000 in the order -CD<γ-CD≤β-CD.     

Cyclodextrin-water soluble polymer ternary complexes enhance the solubility and dissolution behaviour of poorly soluble drugs. Case example: Itraconazole

The aim of the present series of experiments was to improve the solubility and dissolution/precipitation behaviour of a poorly soluble, weakly basic drug, using itraconazole as a case example. Binary inclusion complexes of itraconazole with two commonly used cyclodextrin derivatives and a recently introduced cyclodextrin derivative were prepared. Their solubility and dissolution behaviour was compared with that of the pure drug and the marketed formulation Sporanox®. Ternary complexes were prepared by addition of Soluplus®, a new highly water soluble polymer, during the formation of the itraconazole/cyclodextrin complex. A solid dispersion made of itraconazole and Soluplus® was also studied as a control. Solid state analysis was performed for all formulations and for pure itraconazole using powder X-ray diffraction (pX-RD) and differential scanning calorimetry (DSC). Solubility tests indicated that with all formulation approaches, the aqueous solubility of itraconazole formed with hydroxypropyl-β-cyclodextrin (HP-β-CD) or hydroxybutenyl-β-cyclodextrin (HBen-β-CD) and Soluplus® proved to be the most favourable formulation approaches. Whereas the marketed formulation and the pure drug showed very poor dissolution, both of these ternary inclusion complexes resulted in fast and extensive release of itraconazole in all test media. Using the results of the dissolution experiments, a newly developed physiologically based pharmacokinetic (PBPK) in silico model was applied to compare the in vivo behaviour of Sporanox® with the predicted performance of the most promising ternary complexes from the in vitro studies. The PBPK modelling predicted that the bioavailability of itraconazole is likely to be increased after oral administration of ternary complex formulations, especially when itraconazole is formulated as a ternary complex comprising HP-β-CD or HBen-β-CD and Soluplus®.