Impact of Minimally Invasive Endodontic Procedures on the Development of Dentinal Microcracks

IntroductionTo evaluate the impact of root canal preparation in teeth with ultraconservative access cavities (UltraAC) on the development of dentinal microcracks using a nondestructive longitudinal micro–computed tomography (micro-CT) imaging experimental model. Root canal preparation in teeth with traditional access cavities (TradAC) was used as control.MethodsForty mandibular molars were scanned in a micro-CT device, anatomically matched, and distributed into 4 groups according to the type of access cavity and instrumentation system: traditional/Reciproc (TradAC/RC), traditional/XP-endo Shaper (TradAC/XP), ultraconservative/Reciproc (UltraAC/RC), and ultraconservative/XP-endo Shaper (UltraAC/XP). After root canal preparation, the teeth were rescanned. After reconstruction and co-registration procedures, the images were screened from the furcation level to the apex to identify the presence of dentinal microcracks.ResultsFrom a total of 15,340 cross-section images, 19.65% (3014 slices) had some dentinal microcracks. The qualitative analysis demonstrated the presence of some dentinal microcracks in 11%, 33%, 19%, and 15% of the images of cross-sections in TradAC/RC, TradAC/XP, UltraAC/RC, and UltraAC/XP groups, respectively. All dentinal microcracks observed after root canal preparation were already present in the corresponding images before canal instrumentation. Therefore, no new microcracks were detected, regardless of the access cavity and root canal instrumentation system.ConclusionsRoot canal preparation with Reciproc or XP-endo Shaper under traditional or ultraconservative access cavities did not create dentinal microcracks in extracted mandibular molars.     

Incidence of Middle Mesial Canals Based on Distance between Mesial Canal Orifices in Mandibular Molars: A Clinical and Cone-beam Computed Tomographic Analysis

IntroductionThis study evaluated the presence of midmesial canals (MMCs) in a random sample of mandibular molars and the relationship of the intracanal distance between mesiobuccal (MB) and mesiolingual (ML) canal orifices.MethodsFifty-one extracted mandibular molars were divided into samples of 3 to 4 teeth, mounted in plaster and boxing wax, and immersed in water before cone-beam computed tomographic (CBCT) imaging. Two endodontic residents completed the access openings. The teeth and the CBCT images were interpreted for the presence of MMCs and the mesial intracanal distance. CBCT software measured the distance between the buccal of the MB canal to the lingual of the ML canal at the pulpal floor to determine the average length between the canals.ResultsSeven distinct MMCs were seen both clinically (incidence of 13.725%) and on the CBCT images. Twenty-seven teeth (52.94%) had ambiguous broad isthmi between the MB and the ML orifices. MMCs were present at the furcation level but merged with the MB or ML canal toward the apex in 6 of 7 teeth (85.71%). The mean distance between the mesial canals in teeth with MMCs was 3.643 mm, and it was 3.818 mm for teeth without MMCs. According to independent sample t testing, the P value was >.05.ConclusionsThe incidence of MMCs in mandibular molars appears consistent with the literature. However, there does not appear to be a statistically significant difference in the mesial intracanal distance in teeth with and without MMCs. Visualization of MMCs on CBCTs may be subjective. There does not appear to be a correlation between the presence of MMCs and an increased or decreased mesial intracanal distance.     

Influence of Access Cavity Design on Root Canal Detection,Instrumentation Efficacy,and Fracture Resistance Assessed in Maxillary Molars

Introduction

The aim of this study was to assess the influence of contracted endodontic cavities (CECs) on root canal detection, instrumentation efficacy, and fracture resistance assessed in maxillary molars. Traditional endodontic cavities (TECs) were used as a reference for comparison.

The Effect of Different Access Cavity Designs in Combination with WaveOne Gold and TruNatomy Instrumentation on Remaining Dentin Thickness and Volume

IntroductionThe purpose of this study was to evaluate and compare 2 different access cavity designs in combination with 2 popular single-file preparation systems to see which combination preserves dentin, more specifically pericervical dentin, best. The minimum remaining dentin thickness and dentin volumes were evaluated pre- and postinstrumentation.MethodsSixty extracted human mandibular molars were selected and randomly divided into 2 different access cavity design preparation groups: traditional access cavities (n = 30) and conservative access cavities (n = 30). Within each cavity preparation design group, the 30 teeth were divided into 2 instrumentation groups (WaveOne Gold Primary; Dentsply Sirona, Ballaigues, Switzerland [n = 15] and TruNatomy Prime, Dentsply Sirona [n = 15]). Samples were scanned using micro–computed tomographic imaging before and after access cavity preparation as well as after final endodontic instrumentation. The pericervical remaining dentin thickness and dentin volume changes were evaluated and compared.ResultsConservative access cavity designs resulted in more favorable remaining dentin thickness. The least amount of mean dentin volume loss was also recorded in the conservative access cavity preparation groups regardless of the preparation instrumentation.ConclusionsIn terms of the remaining pericervical dentin thickness and dentin volume reductions, the authors conclude that conservative access cavity designs preserve dentin best.     

Evaluation of the Amount of Root Canal Dentin Removed and Apical Transportation Occurrence after Instrumentation with ProTaper Next,OneShape, and EdgeFile Rotary Systems

IntroductionThe aim of this study was to evaluate the amount of root canal dentin removed and apical transportation occurrence after instrumentation of mesiobuccal canals of maxillary molars with ProTaper Next (PTN [Dentsply Maillefer, Ballaigues, Switzerland]), OneShape (OS [MicroMega, Besançon, France]), and EdgeFile (EF [Edge Endo, Albuquerque, NM]) rotary systems.MethodsTwenty-seven mesiobuccal canals of maxillary molars were used. Canals were randomly divided into 3 groups for canal preparation: PTN, EF X3, or OS (n = 9 for each group). Micro–computed tomographic imaging was used to measure apical transportation (mm) and the volume of dentin removed (mm³). The amount of dentin removed was measured for the coronal portion and for the whole canal length. Superposition of pre- and postoperative cross-sectional apical slices were used to measure apical transportation at 1 mm from the apex; the differences were evaluated using the Kruskal-Wallis test and Wilcoxon analysis. The Spearman correlation coefficient was used to display the relationship between variables for each group. The significance level was set at P < .05.ResultsThe percentages of the amount of dentin removed on the coronal portion and the amount removed for the whole canal length were statistically similar between groups (P > .05). The average amount of apical transportation for the PTN, OS, and EF X3 were 0.197, 0.263, and 0.218 mm, respectively. Statistically, there were no significant differences between the 3 rotary instruments for apical transportation.ConclusionsThe amount of dentin removed for the coronal third portion and the whole canal length was similar for the PTN, OS, and EF X3 rotary instruments. Although there were differences in the sizes of apical enlargement, no apical transportation was observed in any of the instrumentation systems.     

The Global Prevalence of Middle Mesial Canal in Mandibular First and Second Molars Assessed by Cone Beam Computed Tomography: A Systematic Review and Meta-Analysis

IntroductionThis meta-analysis sought to identify the in vivo prevalence and influencing factors of middle mesial canal (MMC) in mandibular first and second molars based on cone-beam computed tomography (CBCT) scans.MethodsMEDLINE/PubMed, Web of Science, Scopus, SciELO, Google Scholar databases/search engines were searched in period between 15^th and 21^st November 2022, to retrieve the in vivo CBCT-based studies that assessed the prevalence of MMC in mandibular first and/or second molars. The studies were strictly assessed using predefined inclusion and exclusion criteria for relevancy and eligibility through screening the title and abstract, and then assessed through reading the full texts using the same criteria. Subsequently, the fulfilled studies were assessed qualitatively using the Newcastle-Ottawa Quality Assessment Scale, and quantitatively using meta-analysis to calculate the pooled prevalence rates of MMC. The publication bias was assessed using funnel plot and Egger's test.ResultsOut of 1122 studies, 33 studies comprised of 13,349 and 7624 mandibular first and second molars, respectively, were eligible for inclusion. Twenty studies scored high quality, while 13 scored moderate quality. The global prevalence of MMC in the first molar was 4.4% (95% CI = 0.035–0.053, P < .001), significantly higher than that of the second molar which was 1.3% (95%, CI = 0.008–0.018, P < .001). Gender, molar side, and age were not influencing factors of MMC prevalence.ConclusionsThe prevalence of MMC is not uncommon, being higher in the mandibular first molar compared to the mandibular second molar. The prevalence of MMC is not influenced by age, molar's side, and gender.     

A Comparison of Volume of Tissue Removed and Biomechanical Analysis of Different Access Cavity Designs in 2-rooted Mandibular First Molars: A Multisample 3-dimensional Finite Element Analysis

IntroductionThe aim of this study was to compare the biomechanical properties and the amount of coronal tissue removed among the different access cavities with a multisample 3-dimensional finite element analysis in the mandibular first molar. The correlation between the amount of tissue removed and the fracture resistance of the teeth was also analyzed.MethodsMicro-computed tomography data from 20 2-rooted mandibular first molars were included in this study as 3-dimensional modeling prototypes. Models of untreated molars and molars treated with the traditional access cavity (TradAC), the conservative access cavity (ConsAC), and the straight-line minimally invasive endodontic access cavities (SMIAC) were created. Each model was loaded in 3 ways to simulate the functional conditions of occlusion. The amount of tissue removed and the maximum stress in the cervical region were recorded and analyzed, and the correlation between them was also analyzed.ResultsThe amount of coronal tissue and pericervical dentin (PCD) removed in SMIAC and ConsAC was less than that of TradAC. The mean maximum stress in the cervical region was significantly smaller in SMIAC and ConsAC than in TradAC. The amount of hard tissue and PCD loss was positively correlated with the maximum stress in the cervical region of the tooth.ConclusionsIn mandibular first molars, it could be beneficial to improve the fracture resistance of the tooth after endodontic treatment by the minimally invasive access cavity to reduce the loss of coronal tooth tissue and PCD. The SMIAC may be an option balancing biomechanical properties and clinical convenience.     

锥形束CT中下颌第三磨牙与下颌管的关系及其与阻生类型的相关性分析

目的:研究在曲面断层片上表现为下颌管与下颌第三磨牙影像重叠的患者,其二者在锥形束CT(CBCT)上的位置关系,为临床风险评估提供参考。方法:研究184颗(146例患者)在曲面断层片上表现为与下颌神经管有影像重叠的下颌第三磨牙,在CBCT上其牙根与下颌神经管的位置关系。分析两者之间位置关系与阻生类型、性别、曲面断层片上下颌神经管骨白线是否可见的相关性。测量下颌第三磨牙与下颌神经管接触的患者其接触的长度及宽度,分析接触长度、宽度与牙根和下颌神经管相对位置的相关性。结果:CBCT图像上下颌第三磨牙与下颌神经管之间是否接触,与其在颌骨内的深度相关,低位阻生接触可能大(P=0.002),与性别相关,女性多(P=0.020);当曲面断层片中下颌神经管骨白线不可见时,接触可能大(P=0.001)。当下颌神经管与牙根舌侧接触时,接触的长度、宽度可能较大。结论:CBCT与曲面断层片相比能更好地体现下颌阻生第三磨牙与下颌神经管的关系,提供更准确的术前风险评估。     

Canal Transportation,Unprepared Areas,and Dentin Removal after Preparation with BT-RaCe and ProTaper Next Systems

Introduction

This study compared the shaping ability of ProTaper Next (Dentsply Sirona, Tulsa, OK) and BT-RaCe (FKG Dentaire, La Chaux-de-Fonds, Switzerland) instrument systems in the mesial canals of mandibular molars using micro–computed tomographic (micro-CT) imaging.

The Effect of Different Molar Access Cavity Designs on Root Canal Shaping Times Using Rotation and Reciprocation Instruments in Mandibular First Molars

IntroductionThe aim was to compare the glide path and final preparation times of WaveOne Gold and TruNatomy in conjunction with two different endodontic access cavity designs in extracted human molar teeth.Methods60 extracted human mandibular molars with mesiobuccal canals were selected and randomly divided into two different access cavity design preparation groups (n = 30). Traditional access cavities (TAC) and conservative access cavities (CAC). Within each cavity design group, the 30 teeth were divided in to two instrumentation groups (WaveOne Gold Primary (n = 15) and TruNatomy Prime (n = 15)). Group 1: TAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 2: CAC, #10 stainless steel manual K-file followed by WaveOne Gold Glider and WaveOne Gold Primary. Group 3: TAC, #10 stainless steel manual K-file followed by TruNatomy Orifice Modifier and Glider and TruNatomy Prime. Group 4: CAC, #10 stainless steel manual K-file followed by TruNatomy Glider and TruNatomy Prime. Glide path and final preparation times were recorded.ResultsShaping time with TruNatomy Glider in combination with TruNatomy Prime instruments were faster compared to the WaveOne Gold Glider/ WaveOne Gold Primary instruments regardless of the type of access cavity preparation. TAC design yielded faster preparation time (38.2 ± 4.57 seconds) compared to the CAC (55.6 ± 6.91 seconds) in the WaveOne Gold Glider/ WaveOne Gold Primary instrumentation group. No difference was found between the different access cavity design groups in combination with TruNatomy Glider/TruNatomy Prime preparation.ConclusionPreparation time with TruNatomy Glider and Prime instruments was significantly faster than WaveOne Gold Glider/WaveOne Gold Primary, regardless of the access cavity design. TAC design in combination with WaveOne Gold Glider/ WaveOne Gold Primary instrumentation resulted in faster preparation time compared to WaveOne Gold Glider/WaveOne Gold in combination with the CAC design.     

Canal Transportation and Centering Ability of WaveOne Gold in Combination with and without Different Glide Path Techniques

Introduction

The aim of this study was to compare centering ability and transportation values of the Primary WaveOne Gold (PWOG; Dentsply Sirona, Ballaigues, Switzerland) instrument with or without different glide path techniques. Centering ability and transportation were also compared between the 3 different glide path preparation groups.

Efficacy of 3 Supplementary Irrigation Protocols in the Removal of Hard Tissue Debris from the Mesial Root Canal System of Mandibular Molars

IntroductionInstrumentation of the mesial root canal system of mandibular molars may hinder disinfection by packing hard tissue debris within the isthmuses. The removal of accumulated hard tissue debris (AHTD) by 3 supplemental irrigation systems, 2 ultrasonically activated and 1 multisonic, was assessed with micro–computed tomographic imaging.MethodsTwenty-four extracted mandibular molars with 2 mesial canals connected by an isthmus and converging to a single foramen were selected. After preparation of the mesial canals with WaveOne Gold instruments (Dentsply Maillefer, Ballaigues, Switzerland), anatomically matched specimens were assigned to 3 final irrigation protocols (n = 8): intermittent ultrasonic (IU) with an ultrasonically energized 200-μm wire (Irrisafe; Satelec, Bordeaux, France), continuous ultrasonic (CU) with an ultrasonic irrigation needle (ProUltra PiezoFlow, Dentsply Maillefer), and GentleWave (GW) system (Sonendo Inc, Laguna Hills, CA). Specimens were scanned (SkyScan 1176; Bruker-microCT, Kontich, Belgium) at 17.18-μm pixel size before and after preparation and irrigation protocols. Data sets were coregistered, and the percentage reduction of AHTD calculated within the canals and isthmus for each specimen was statistically compared using 1-way analysis of variance and post hoc Tukey tests with a 5% significance level.ResultsThe mean percentage reduction of AHTD in canals and isthmuses was significantly higher for GW (96.4% and 97.9%, respectively) than for CU (80.0% and 88.9%, respectively) (P < .05). AHTD reduction for IU (91.2% and 93.5%, respectively) did not differ significantly from GW and CU (P > .05).ConclusionsGW achieved greater efficacy in the removal of AHTD from the mesial root canal system of mandibular molars compared with CU but not IU. The efficacy of CU and IU was comparable.     

Impact of Contracted Endodontic Cavities on Root Canal Disinfection and Shaping

IntroductionThe impact of minimally invasive endodontic procedures on root canal disinfection has not been determined. This ex vivo study compared root canal disinfection and shaping in teeth with contracted or conventional endodontic cavities.MethodsMandibular incisors with oval-shaped canals were selected and anatomically matched based on micro–computed tomographic (micro-CT) analysis and distributed into 2 groups. Conservative and conventional access cavities were prepared, and the canals were contaminated with a pure culture of Enterococcus faecalis for 30 days. Root canal preparation in both groups was performed using the XP-endo Shaper instrument (FKG Dentaire, La Chaux-de-Fonds, Switzerland) and 2.5% sodium hypochlorite irrigation. Intracanal bacteriologic samples were taken before and after preparation, and DNA was extracted and subjected to quantitative polymerase chain reaction. Micro-CT scans taken before and after preparation were used for shaping evaluation. Bacteriologic data were analyzed by the Poisson regression model and the chi-square test with Yates correction. Micro-CT data were analyzed by the Wilcoxon, Mann-Whitney, and Student t tests with the significance level set at 5%.ResultsAll initial samples were positive for E. faecalis. After preparation, the number of bacteria-positive samples was significantly higher in the contracted cavity group (25/29, 86%) than in the conventional cavity group (14/28, 50%) (P < .01). Intergroup quantitative comparison showed that the reduction in bacterial counts was also significantly higher in the group of conventional cavities (P < .01). Micro-CT data revealed no significant difference in the amount of unprepared areas between groups.ConclusionsOur findings showed that although shaping using an adjustable instrument was similar between groups, disinfection was significantly compromised after root canal preparation of teeth with contracted endodontic cavities.     

Micro-Computed Tomographic Evaluation of Canal Transportation and Centering Ability of 4 Heat-Treated Nickel-Titanium Systems

IntroductionThis study aimed to evaluate and compare canal transportation and centering ability of 4 different root canal preparation systems produced with thermal treatments by means of micro–computed tomographic imaging.MethodsEighty mesial canals of human extracted mandibular molars were selected based on similar morphologic parameters and were randomly assigned to 4 experimental groups (n = 20) according to the canal instrumentation technique: HyFlex CM (HCM [Coltène-Whaledent, Allstätten, Switzerland]), HyFlex EDM (HEDM [Coltène-Whaledent]), WaveOne Gold (WOG [Dentsply Sirona, Ballaigues, Switzerland]), and OneCurve (OC [Micro-Mega, Besancon, France]). The specimens were scanned before and after root canal preparation using X-ray micro-computed tomographic imaging at a resolution of 19.9 μm. Apical transportation and centering ability were then analyzed at 3 different levels: 3 mm, 5 mm, and 7 mm from the apex, representing the apical, midroot, and coronal thirds of the root, respectively. One-way analysis of variance and Kruskal-Wallis tests were used to statistically compare the groups. The significance level was set at 5%.ResultsHCM caused less canal transportation than WOG at the 3-mm level in both the buccal and lingual canals (P < .05). Also, HCM resulted in less canal transportation than WOG and OC at the 7-mm level regarding lingual canals. No statistically significant differences were recorded between the groups when the mean centering ratios were compared.ConclusionsThe 4 evaluated systems safely prepared root canals causing minimal canal transportation and producing relatively centered preparations. In terms of canal transportation, HCM performed better than WOG at the apical level and better than WOG and OC at the coronal level.     

Influence of Contracted Endodontic Access on Root Canal Geometry: An In Vitro Study

Introduction

Contracted endodontic cavities (CECs) have developed from the concept of minimally invasive dentistry and provide an alternative to traditional endodontic cavities (TECs). They have been designed in an effort to preserve the mechanical stability of teeth. The contracted cavity design preserves more of the dentin but may influence the geometric shaping parameters. The aim of this micro–computed tomographic study was to evaluate the influence of contracted endodontic cavities on the preservation of the original root canal anatomy after shaping with nickel-titanium rotary instruments.

The Apical Root Canal System of Teeth with Posttreatment Apical Periodontitis: Correlating Microbiologic,Tomographic, and Histopathologic Findings

IntroductionThis study evaluated the microbiological conditions of the apical root canal system of teeth with posttreatment apical periodontitis and correlated them with observations from cone-beam computed tomographic (CBCT) imaging, micro–computed tomographic (micro-CT) imaging, and histopathology.MethodsRoot apices were obtained from 36 root canal–treated teeth subjected to periradicular surgery. CBCT examination was available before surgery. The apical root specimens were scanned in a micro-CT device and then cryopulverized. The powder was subjected to DNA extraction for real-time polymerase chain reaction quantification of total bacteria, Streptococcus species, members of the phylum Actinobacteria, and Enterococcus faecalis. Microbiological findings were evaluated for associations with CBCT, micro-CT, and histopathologic data. An association between lesion size and the proportion of unfilled apical canal system volume was also assessed.ResultsAll cryopulverized specimens were positive for total bacteria. Actinobacteria and streptococci occurred in 35 and 33 specimens, respectively, and were usually dominant in the community. Actinobacteria counts were 2.23 times higher in granulomas than in cysts. Streptococci were significantly more present in small lesion cases. E. faecalis was detected in only 7 samples, always as a dominant community member. The association of total bacteria, streptococci, and Actinobacteria counts with the unfilled canal volume was significant in the univariate analyses but not confirmed in the adjusted analyses. Large lesions were significantly associated with a higher volume of unfilled apical canals.ConclusionsBacterial infection occurred in all root apices, with high prevalence and dominance of Actinobacteria and streptococci. The volume of the unfilled apical canal system was significantly associated with the lesion size and possibly with bacterial counts. Findings illustrate the need to thoroughly disinfect and fill the apical root canal of infected teeth during endodontic therapy.     

Comparative Assessment of the Effects of Gates-Glidden,Largo, LA-Axxess,and New Brazilian Drill CPdrill on Coronal Pre-enlargement: Cone-beam Computed Tomographic Analysis

Introduction

The removal of dentin interferences from the cervical third of root canals is essential for their correct cleaning and shaping and to facilitate access of endodontic instruments to the critical apical region. In mandibular molars, the concavity observed in the furcation area reduces dentin thickness, making this region more susceptible to perforation. The present ex vivo study used cone-beam computed tomographic imaging to compare 3 rotary burs with a new rotary bur recently launched in Brazil (ie, CPdrill; Helse Industry and Commerce Ltda, Santa Rosa, São Paulo, Brazil) regarding the amount of dentin removal from the distal wall of the mesial root of mandibular first molars.

Methods

A total of 40 root canals were selected and randomly divided into 4 groups for cervical preparation: Gates-Glidden burs #2 and #3 (Dentsply Maillefer, Ballaigues, Switzerland), Largo burs #1 and #2 (Dentsply Maillefer), LA-Axxess burs #1 and #2 (SybronEndo, Glendora, CA), and CPdrill burs (1-size only). Dentin thickness in the distal wall of mesial canals at 2 mm from the furcation was measured using I-CATvision software before and after cervical preparation.

Results

There was no statistically significant difference between groups regarding residual dentin thickness after instrumentation with the drills (P = .684).

Conclusions

It was concluded that CPdrill is safe for use in cervical preparation of the mesial root of mandibular first molars because it did not promote excessive dentin removal on distal walls.     

Effects of Conservative Access and Apical Enlargement on Shaping and Dentin Preservation with Traditional and Modern Instruments: A Micro-computed Tomographic Study

IntroductionThis ex vivo study aimed to evaluate the shaping abilities and preservation of dentin with traditional and modern instruments after using sizes 25 and 40 in oval canals of mandibular incisors with conservative access.MethodThirty mandibular incisors with single straight oval canals were selected and assigned into 2 groups (n = 15) according to the instrument system used during preparation, Slim Shaper (SS) plus Apical Shaper (AS) and Protaper Gold (PG). The samples were subjected to micro-computed tomography before and after preparation with sizes 25 and 40. The shaping parameters evaluated included canal volume and surface area, amount of unprepared root canal walls, and reduction in pericervical dentin.ResultsCanal volume and surface area were significantly increased after enlargement with each instrument size (P < .01). The percentage of unprepared areas showed a significant intragroup decrease after using PG F2 and F4 or SS 3 and AS (P < .05). Intergroup comparison showed no significant differences. Pericervical dentin was reduced in all groups. The intragroup comparison only revealed a significant reduction (P < .01) between PG F2 and F4. In addition, a significant decrease in pericervical dentin (P < .05) was observed between PG F4 40/.06 and AS 40/.03. No significant differences were observed between PG F2 25/.08 and SS 3 25/.04.ConclusionIncreasing the instrumentation size from 25 to 40 significantly reduces the percentage of unprepared areas regardless of the system used. In addition, using a modern system with a regressive taper allows the maintenance of pericervical dentin without compromising shaping efficacy in the apical third of the mandibular incisors with oval canals and conservative access.     

Comparison of the Effects of WaveOne Gold,TruNatomy, and Conventional Hand Files on Remaining Dentin Volume in the Coronal Part of the Root and Preparation Efficiency in Mandibular Molars

IntroductionThe use of file systems that work with different principles in root canal treatment is becoming widespread. The aim of this study was to evaluate the remaining dentine volume in the coronal region of the root and preparation efficiency after the use of conventional hand files, WaveOne Gold; which works with reciprocating motion, and TruNatomy; which works with rotational motion in the root canal treatment of mandibular molar teeth.MethodsAll canals of permanent mandibular molars (n = 36) were used. Root canals in each group (n = 12) were prepared with conventional hand files, WaveOne Gold, and TruNatomy. The three-dimensional images were evaluated for remaining dentine volume in the coronal two-millimeter region of the root and change in volume of the entire root canal space.ResultsThere was no statistically significant difference between the groups in terms of mean differences pre and postpreparation (P > .05). The mean differences after preparation were observed the most in the WaveOne Gold group and the least in the TruNatomy group in the coronal two-millimeter region of the root and entire canal volume, but the differences were not significant (P > .05, P > .05, respectively).ConclusionsConventional hand files, WaveOne Gold working with reciprocating motion, and TruNatomy working with rotational motion, which are the file systems used in the study, are not superior to each other in terms of remaining dentin volume in the coronal two-millimeter region of the root and preparation efficiency in the entire root canal space in mandibular molars.