Tumour necrotizing factor-alpha promoter and GST-T1 genotype predict skin allergy to chromate in cement workers in Taiwan

BACKGROUND: Construction workers exposed to cement are known to suffer from occupational contact dermatitis because of chromate sensitization. It is not clear whether certain genotypes are associated with increased susceptibility of chromate sensitization in those workers regularly exposed to cement. OBJECTIVE: The objective of this study was to determine the genotypes predisposing workers to cement-induced contact dermatitis. METHODS: A total of 153 current cement workers who had regular contact with cement were telephone interviewed for skin problems in the past 12 months, work exposure, and personal protection. A dermatologist examined their skin and conducted patch test with common skin allergens. Blood samples were donated for genotypic determination by polymerase chain reaction-based assays for GST-T1, GST-M1 (null/non-null), tumour necrosis factor (TNF) alpha promoter-308G/A, and interleukin (IL) 4-590C/T. RESULT: High percentage of dermatitis was noted in the 153 workers examined, which was correlated with reported skin problems. By patch testing, construction workers had a high-prevalence rate (12%) of sensitivity to chromate. Sensitivity to chromate was significantly associated with TNF alpha promoter-308 heterozygous (GA) as compared with GG genotype (odds ratio 3.9, 95% confidence interval 1.1-13.2), as well as with GST-T1 null genotype (odds ratio 5.5, 95% confidence interval 1.4-36.2), but neither the GST-M1 nor the IL-4 genotypes. CONCLUSION: It is concluded that among workers frequently exposed to cement in Southern Taiwan, those with TNF alpha promoter-308 heterozygous (GA) genotype or GST-T1 null genotype had increased risk of chromate sensitization.     

Occupational allergic contact dermatitis and patch test results of leather workers at two Indonesian tanneries

Background. Tannery workers are at considerable risk of developing occupational contact dermatitis. Occupational skin diseases in tannery workers in newly industrialized countries have been reported, but neither the prevalence of occupational allergic contact dermatitis nor the skin‐sensitizing agents were specifically examined in those studies. Objectives. To assess the prevalence of occupational allergic contact dermatitis in Indonesian tanneries, identify the causative allergens, and propose a tannery work series of patch test allergens. Patients/methods A cross‐sectional study in all workers at two Indonesian tanneries was performed to assess the prevalence of occupational contact dermatitis via a questionnaire‐based interview and skin examination. Workers with occupational contact dermatitis were patch tested to identify the causative allergens. Results. Occupational contact dermatitis was suspected in 77 (16%) of the 472 workers. Thirteen (3%) of these 472 workers were confirmed to have occupational allergic contact dermatitis. Potassium dichromate (9.2%), N,N‐diphenylguanidine (5.3%), benzidine (3.9%) and sodium metabisulfite (2.6%) were found to be the occupationally relevant sensitizers. Conclusions. The sensitization pattern showed some differences from the data in studies reported from other newly industrial countries. We compiled a ‘tannery work series' of allergens for patch testing. A number of these allergens may also be considered for patch testing in patients with (leather) shoe dermatitis.     

Epidemiology of occupational skin disease in Singapore 1989-1998

This is an epidemiologic study of occupational skin disease in Singapore. All patients diagnosed with occupational dermatoses in the National Skin Centre, Singapore, over the 10-year period 1989-1998 were studied retrospectively. Irritant contact dermatitis was found to be more common than allergic contact dermatitis. The major sources of occupational dermatitis in Singapore were the metal/engineering, building/construction, electrical/electronics and transport industries. The main irritants were detergents/wet work, solvent and oil/grease. The main allergens were chromate, rubber chemicals and nickel. We concluded that the main sources of occupational skin disease and main allergens in Singapore had remained the same compared to a similar study of occupational skin diseases in 1984-85. Weak irritants are still the predominant causes of occupational irritant contact dermatitis, though the main irritants have changed compared to the previous study, where cutting fluids, cement and solvent were the most common irritants.     

Dermatological screening and results of patch testing among Polish apprentice hairdressers

Background. High prevalence of occupational dermatoses among hairdressers has been confirmed in many studies, while work‐related skin disorders in apprentice hairdressers are less known. Objectives. The aim of the study was to investigate the frequency of work‐related skin disorders among apprentice hairdressers, and to identify the factors contributing to the development of dermatoses during vocational training. Patients and methods. One hundred thirty‐nine apprentice hairdressers, aged 17–19 years, were included in the study. A questionnaire survey, personal interview, dermatological examination and patch tests were conducted. Results. Present or past work‐related skin conditions affecting the hands were reported by 43.9% of individuals, and diagnosed in 25.9% on dermatological examination. Positive patch test results were found in 38.1%. The most frequent allergens were nickel (29.3% of all tested) and ammonium persulfate (8.3%). Allergic contact dermatitis was recorded in 27.3%, and was of occupational origin in 87.9% of all tested individuals. Irritant contact dermatitis was diagnosed in 51.1% of participants (this prevalence was higher than that based only on an interview). Survey responses revealed inadequate knowledge of the risk of occupational skin diseases and protective measures. Conclusions. It is necessary to implement an educational programme for apprentice hairdressers, in order to increase their knowledge of the risk of skin damage and to promote appropriate use of protective measures, starting from the earliest stages of their training.     

Sickness absence due to occupational dermatoses in a prefabrication construction factory

In a study of sickness absence due to occupational dermatoses among 360 construction workers in a prefabrication construction factory in 1984, we found 3 workers with allergic contact dermatitis from chromate in cement who required medical leave. There were 5 sickness absence spells due to occupational dermatoses and the number of days lost due to occupational dermatoses was 53 days for the year. This averaged out at 0.01 spells per worker per year, 0.15 days per worker per year and 15 days per spell. It appeared that the number of workers requiring sickness absence from occupational dermatoses was low, but that those with the condition required about 2 weeks of sickness absence. Allergic contact dermatitis from chromate in cement appeared to be the only occupational dermatosis causing sickness absence in the factory.     

Occupational dermatitis in a prefabrication construction factory

In a field study of Occupational Dermatoses in a prefabrication construction factory, 272 workers were interviewed, examined and patch tested to chromate, cobalt, nickel, rubber mixes, epoxy resin, melamine formaldehyde and conplasts. The prevalence occupational dermatitis was 14% (38/272); 57% (22/38) were irritant dermatitis from cement; 39.5% (15/38) were allergic contact dermatitis from cement (2 with concomitant rubber glove allergy); and 2.5% (1/38) were allergic to rubber chemicals in gloves. The overall prevalence of chromate sensitivity was 8.5% (23/272), with the highest rate from the concreting bays of the factory. The rate was unrelated to the duration of workers'engagement in construction work. 34.8% (8/23) had asymptomatic chromate allergy. The prevalence of cobalt reactions was 17.4% (4/23) and all were associated with chromate allergy.     

Cobalt and nickel content of Asian cements

The total cobalt and nickel concentration of 11 brands of Asian cement ranged from 8.1 to 14.2 micrograms/g and 14.9 to 28.5 micrograms/g, respectively. These metals exist mainly as insoluble salts; the water-soluble concentration of cobalt and nickel in the cements ranged from 0.39 to 0.65 micrograms/g and from 0-1.2 micrograms/g, respectively. 1.5% (4/272) of construction workers in a prefabrication construction factory had cobalt sensitivity. All had allergic contact dermatitis from chromate in cement. No worker had isolated cobalt sensitivity and cement dermatitis. It appeared that sensitization to cobalt in cement occurs only secondarily to an existing cement dermatitis. 1.8% (5/272) workers had nickel sensitivity: 2 with allergic contact dermatitis to nickel in their watches, 2 were asymptomatic and 1 had allergic contact dermatitis to chromate and cobalt in cement. The low prevalence of cobalt and nickel sensitivity from cement was probably related to the low concentration of soluble cobalt and nickel salts in the cement. However, these insoluble salts can form soluble complexes with body fluids on eczematous skin and sensitize the skin.     

Occupational protein contact dermatitis in food handlers

The preparation of food in restaurant kitchens carries a high risk of occupational dermatoses. Analysis of 33 cases revealed four different etiological types. Simple irritant dermatitis was rare (2 cases), plain contact dermatitis was more common (6 cases). Fifteen patients had relevant patch tests and scratch tests; ten had positive scratch tests only to explain the cause of their dermatitis. The last type was termed protein contact dermatitis. The major type IV allergens incriminated were metals, onion and garlic. The major proteinaceous allergens indicated by history and test results were fish and shell-fish. Open patch tests with the incriminated foods may cause erythema or oedema on normal skin after 20 minutes. Previously eczematous, now normal looking, skin often responds with a crop of dyshidrotic vesicles preceded by erythema and itching 30 minutes after the application of an open test. Examination for specific IgE is not always positive in such cases. Inhalant allergy was rare. The results indicate that food handlers are sensitized by the protein they touch, and then react to later contact with the proteins. Protein contact dermatitis is similarly common among veterinary surgeons, while the importance in other occupational groups remains to be studied.     

Dynamic patterns of allergic patch test reactions to 10 European standard allergens

In an epidemiological study of occupational dermatitis in 5 different show factories, 246 workers were interviewed, examined and patch tested using standard and occupational patch test series. The prevalence of occupational contact dermatitis was 14.6% (36/246): 8.1% (20/246) irritant contact dermatitis (OACD). Among the latter, the most common occupational allergens were p-tert-butylphenol-formaldehyde resin and mercaptobenzothiazole. 6% (15/246) presented with hyperkeratosis of the fingertips, while 3.2% (8/246) reported prutitus sine materia (PSM) present only during working hours. 2 workers presented with vitiligo-like leukodermic patches on the backs of their hands and on their forearms. Some jobs were more frequently associated with skin complaints. In the assembly department, OACD was most frequent (11.4%), attributed to contact with adhesives and, to a lesser degree, with rubber and leather, OICD caused by contact with the solvents contained in adhesives and varnishes was probably caused by the dust present in the working environment was reported by 33.3% of the workers in the sole-cutting and scraping departments. Hyperkeratosis of the fingertips, as a reaction to the continuous trauma of leather on the skin, was observed most frequently (41.6%) in the sole-cutting department.     

Occupational dermatoses in a plant producing binders for paints and glues

A survey of occupational dermatoses, based on a questionnaire, clinical examination and patch testing, was carried out among present and former employees in a plant producing binders for glues and paints. The binders are chemically based on vinyl acetate and/or acrylates. Preservatives are needed and those based on methylchloroisothiazolinone/methylisothiazolinone (MCI/MI) are the most commonly used. The questionnaire was answered by 83 out of 85 present employees (97.6%) and 12 out of 15 former employees (80.0%). 76 of the present (89.4%) and 11 of the former employees (73.3%), respectively, participated in the clinical examination and patch testing, which was conducted with a standard test series and chemicals from the work environment. Occupational dermatosis was diagnosed in 22 present workers (28.9%). Irritant and allergic contact dermatitis was demonstrated in 9 (11.8%) and 13 (17.1%) employees, respectively. Occupational contact allergy to acrylates and formaldehyde was detected in 3 workers and 1 worker, respectively. 12 individuals (9 present and 3 former production workers) had an occupational contact allergy to MCI/MI. 4 of the present workers had spilled Kathon LX on their skin resulting in chemical burns and allergic contact dermatitis. In total, the figure for occupational skin diseases among all present production workers was 40.4%.     

Change in cement manufacturing process,a cause for decline in chromate allergy?

Hexavalent chromate in cement is the commonest cause of allergic contact dermatitis, especially among construction workers. Over the past decades, there has been a general decline in the prevalence of chromate allergy among construction workers. We suspect that a change in the constituents of cement, resulting in the lowering of the hexavalent chromate, contributed to the decline. Slag (free from hexavalent chromate) from the iron-quenched, blast furnace process has been used as a substitute for clinker (which contains high hexavalent chromate) in manufacturing cement As a result, the slag has diluted the hexavalent chromate content of cement. Our analytical study showed that slag is free from hexavalent chromate and that the hexavalent chromate of clinker ranged from 6–17 μg/g. Substituting slag for clinker resulted in dilution of hexavalent chromate in the cement. The hexavalent chromate content of cement declines proportionately with increasing proportion of slag, e.g., a cement containing 5% slag has a total hexavalent chromate concentration of 17.5 μg/g. whereas increasing the proportion of slag to 60%; reduced the hexavalent chromate content to 7.1 μg/g. in the same cement.     

Occupational dermatoses in a metalworking plant

In a plant producing advanced components for engines and drivelines we undertook a survey of occupational dermatoses, based on a questionnaire, clinical examination, and patch testing with a standard series and a series of samples from the working environment. The questionnaire was given to all 430 employees and it was answered and returned by 382 of these. 214 reported having had or having skin manifestations during the time of employment suspected of being work-related. 183 employees (164 metal workers, 19 office staff) participated in the clinical investigation, 182 (163 metal workers, 19 office staff) being patch tested. Occupational dermatoses were diagnosed in 23 of these 163 (14.1%) and in 1 of these 19 (5.3%). In all, irritant contact dermatitis was diagnosed in 12 metal workers, occupational allergic contact dermatitis in 11 (10 metal workers and 1 office clerk) and folliculitis in 1 metal worker. In the 11, neat oils were the cause in 4 workers, a water-based cutting fluid in 3 and various biocides in 4.     

Epoxy-based production of wind turbine rotor blades: occupational dermatoses

Occupational dermatoses were investigated in a factory producing rotor blades for wind turbines by an epoxy-based process. In a blinded study design, 603 workers were first interviewed and thereafter clinically examined. Based on a history of work-related skin disease, clinical findings of dermatitis, or both, 325 (53.9%) of the workers were patch tested with a specially profiled occupational patch-test series and the European standard patch-test series. Calculated on all investigated workers, 17.1% of the workers were diagnosed with occupational dermatoses caused by work. Occupational allergic contact dermatitis was found in 10.9% of the workers. The estimated frequency of irritant contact dermatitis caused by work was 6.1%. Dermatitis on the hands was associated with contact allergy to epoxy resin (P = 0.017). The number of days on leave before the clinical examination was negatively associated with the presence of dermatitis (P = 0.001). Among workers employed 7-12 months, the frequency of occupational contact allergy was higher than that among workers employed for 相似文献   

Occupational dermatoses among fibreglass-reinforced plastics factory workers

Fibreglass-reinforced plastics (FRP) factory workers are at high risk of developing occupational dermatoses because of their exposure to many chemicals used in the manufacture of plastics as well as to glass fibre or dust. Patch tests were carried out on 29 workers involved in FRP manufacturing processes where unsaturated polyester (UP) resin was used, to investigate the causes of their skin problems. Of the 22 workers who reported experiencing skin problems, 16 showed positive results to at least 1 chemical, including 6 cases of multiple sensitivity. 2 showed positive reactions to UP base resin, 6 to cobalt chloride, 5 to benzoyl peroxide (BPO), 4 to methyl ethyl ketone peroxide (MEKPO), 2 to para-tertiary butyl catechol (PTBC), 1 to styrene and 1 to formaldehyde. After taking into account their exposures and reported causes by questionnaires and their patch test results, 7 cases were diagnosed as allergic contact dermatitis (ACD) due to chemicals, 3 as irritant contact dermatitis (ICD) due to chemicals, and 3 as dermatitis due to mechanical irritation (MI) from glass fibre or dust, as well as 9 as ACD and/or MI. 18 of the total of 29 subjects (62.1%), including 2 workers without a history of skin problems, were sensitized to at least 1 chemical. Cobalt, peroxides, PTBC and UP base resin were the common causes of ACD.     

Contact sensitization among ceramics workers

139 workers from 3 ceramics factories underwent dermatological and allergological examination, using standard and occupational patch test series, in order to evaluate the prevalence of dermatitis and contact sensitization, to identify the most important sensitizing substances in the ceramics industry, and to correlate the results with possible risk factors such as atopy. Hand dermatitis had affected 37% of the subjects examined. 27% of the workers were sensitized to 1 or more allergens. Of 52 subjects with dermatitis, 37% had allergic contact dermatitis and 63% irritant contact dermatitis. 18 subjects were found to be sensitized without showing any previous or present clinical symptoms. Atopy tended towards correlation with the overall incidence of dermatitis, though not with the prevalence of sensitization.     

Occupational dermatoses in Singapore

A study of occupational dermatoses is described. 97% of 389 cases were contact dermatitis, of which 66.3% were irritant and 33.7% allergic, in both male and female workers. Cutting oils, solvents and flux from the engineering and electronic industries were the commonest irritants, and chromate from cement in the construction industry was the commonest allergen. The other occupational allergens were rubber chemicals and epoxy resin. The construction industry was the largest source of occupational dermatoses cases seen; possible preventive measures are discussed.     

Multicenter study of preservative sensitivity in patients with suspected cosmetic contact dermatitis in Korea

As many new cosmetic products are introduced into the market, attention must be given to contact dermatitis, which is commonly caused by cosmetics. We investigate the prevalence of preservative allergy in 584 patients with suspected cosmetic contact dermatitis at 11 different hospitals. From January 2010 to March 2011, 584 patients at 11 hospital dermatology departments presented with cosmetic contact dermatitis symptoms. These patients were patch-tested for preservative allergens. An irritancy patch test performed on 30 control subjects using allergens of various concentrations showed high irritancy rates. Preservative hypersensitivity was detected in 41.1% of patients. Allergens with the highest positive test rates were benzalkonium chloride (12.1%), thimerosal (9.9%) and methylchloroisothiazolinone/methylisothiazolinone (MCI/MI) (5.5%). Benzalkonium chloride and chlorphenesin had the highest irritancy rate based on an irritancy patch test performed using various concentrations. Seven of 30 normal subjects had a positive irritant patch reading with 0.1% benzalkonium chloride and eight of 30 normal subjects had a positive irritant patch reading at 4 days with 0.5% chlorphenesin in petrolatum. Although benzalkonium chloride was highly positive for skin reactions in our study, most reactions were probably irritation. MCI/MI and thimerosal showed highly positive allergy reactions in our study. The optimum concentration of chlorphenesin to avoid skin reactions is less than 0.5%.     

Self-reported skin symptoms in metal workers

Machinists and machine maintenance men working in the metal industry use metal-working fluids capable of causing irritant and allergic contact dermatitis. The objectives of this study were to find out the frequency of skin symptoms in machinists and machine maintenance men (metal workers) and to compare the risk of their skin symptoms to that in office workers (controls). A total of 726 male metal workers and 84 controls answered a structured telephone questionnaire enquiring about work, atopy, skin symptoms, their impact on life, etc. The risk of skin symptoms compared with that in the controls was estimated using a logistic regression analysis. Of the metal workers, 20% reported recurring or prolonged dermatitis on their hands or forearms during the past 12 months. The hand or forearm dermatitis (HD) affected mostly the metal workers' mood and their activities at work. Recurring dermatitis elsewhere (DE) than in the hands and in connection with work was reported by 10%. The risk of HD was about twofold and the risk of DE was about fourfold compared with that in the controls. The HD of machinists may be severe and affect their ability to work. DE may have clinical significance in machinists.     

Is a worker's understanding of their diagnosis an important determinant of outcome in occupational contact dermatitis?

The possible effect of an individual's knowledge of their diagnosis on their disease outcome was examined in a group of 230 workers with occupational contact dermatitis. The workers were surveyed with an interviewer-administered questionnaire for an average of 5 years following a diagnosis of occupational contact dermatitis. 48% had allergic contact dermatitis and 52% had irritant contact dermatitis. There was a poor correlation between the workers' recalled diagnosis and the actual diagnosis, but better concordance with their recollection of patch test results. Only 33% correctly identified their diagnosis. Those who could not were approximately 2 x as likely to still have active dermatitis, to have more severe dermatitis and to note that their skin problem interfered with their work and home activities. Those who had no idea of their diagnosis were 3 x as likely to have these problems. These results raise the possibility that further efforts directed at the patient's education with respect to their condition might improve the outcome of their occupational skin disease.     

Consequences of occupational food‐related hand dermatoses with a focus on protein contact dermatitis

Background. Protein contact dermatitis is a frequent disorder among hand eczema patients who have occupational food contact. Knowledge about the consequences of having protein contact dermatitis is lacking. Objectives. To investigate the consequences of having occupational skin disease on the hands resulting from food handling, with a focus on protein contact dermatitis. Material and methods. One hundred and seventy‐eight patients who were identified as having skin disease related to occupational food exposure and who answered a questionnaire concerning the consequences of their skin disease were included in the study. The patients were consecutively examined at Gentofte Hospital, Denmark between 2001 and 2010. Results. Seventy‐five per cent of patients with protein contact dermatitis had to wear gloves at work, and 62.5% reported sick leave lasting for >3 weeks, as compared with 60.2% and 30%, respectively, of the patients with other occupational food‐related hand dermatoses (p = 0.02). Sixty‐two per cent and 43%, respectively, had to change job because of skin problems (p = 0.02). Atopic dermatitis was equally common in the two groups. Conclusion. We found that the patients with protein contact dermatitis experienced more severe and frequent consequences than patients with other food‐related hand dermatoses.