Utilization of an Amorphous Form of a Water-Soluble GPIIb/IIIa Antagonist for Controlled Release from Biodegradable Microspheres

Purpose. We prepared injectable microspheres for controlled release of TAK-029, a water-soluble GPIIb/IIIa antagonist and discussed the characteristics of controlled release from microspheres. Methods. Copoly(dl-lactic/glycolic)acid (PLGA) microspheres were used for controlled release of TAK-029 [4-(4-amidinobenzoylglycyl)-3-methoxycarbonyl-2-oxopiperazine-l-acetic acid]. They were prepared with a solid-in-oil-in-water (S/O/W) emulsion solvent evaporation technique using either a crystalline form or an amorphous form of the drug. Results. An amorphous form of TAK-029 gave more homogeneous S/O dispersion and higher viscosity than its crystalline form when added to dichloromethane solution of PLGA, resulting in a high drug entrapment into microspheres and a well-controlled release of the drug. Additions of sodium chloride into an external aqueous phase and L-arginine into an oil phase also increased entrapment of the drug, and reduced initial burst of the drug from the microspheres. The micro-spheres demonstrated a desirable plasma level profile in therapeutic range (20–100 ng/ml) for 3 weeks in rats after single subcutaneous injection. Conclusions. A well-controlled release of TAK-029, a water-soluble neutral drug, with small initial burst was achieved by utilizing its amorphous form as a result of possible interaction with PLGA and L-arginine.     

Preparation and Characterization of a Composite PLGA and Poly(Acryloyl Hydroxyethyl Starch) Microsphere System for Protein Delivery

Purpose. To prepare and characterize a novel composite microsphere system based on poly(D,L-lactide-co-glycolide) (PLGA) and poly(acryloyl hydroxyethyl starch) (acHES) hydrogel for controlled protein delivery. Methods. Model proteins, bovine serum albumin, and horseradish peroxidase were encapsulated in the acHES hydrogel, and then the protein-containing acHES hydrogel particles were fabricated in the PLGA matrix by a solvent extraction or evaporation method. The protein-loaded PLGA-acHES composite microspheres were characterized for protein loading efficiency, particle size, and in vitro protein release. Protein stability was examined by size-exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and monitoring the enzymatic activity. Results. Scanning electron microscopy showed discrete PLGA microspheres containing many acHES particles. The composite microspheres were spherical and smooth in size range of 39-93 m. The drug loading efficiency ranged from 51 to 101%. The composite microspheres showed more favorable in vitro release than conventional PLGA microspheres. The composite microspheres showed 20% less initial with a gradual sustained release compared to high burst (60%) followed by a very slow release with the conventional PLGA microspheres. The composite microspheres also stabilized encapsulated proteins from the loss of activity during the microsphere preparation and release. Proteins extracted from the composite microspheres showed good stability without protein degradation products and structural integrity changes in the size-exclusion chromatography and SDS-PAGE analyses. Horseradish peroxidase extracted from microspheres retained more than 81% enzymatic activity. Conclusion. The PLGA-acHES composite microsphere system could be useful for the controlled delivery of protein drugs.     

葫芦素B-聚乳酸-羟基乙酸共聚物载药纳米粒的构建与药效学评价

目的 以聚乳酸-羟基乙酸共聚物（PLGA）作为纳米制剂载体材料将葫芦素B制备成纳米粒,并考察其对HepG2肝癌细胞的抑制效果。方法 使用乳化溶剂蒸发法制备葫芦素B-PLGA载药纳米粒,以PLGA浓度（X₁）、PVA浓度（X₂）和药物浓度（X₃）作为考察因素,以载药纳米粒的粒径大小（Y₁）和包封率（Y₂）作为评价指标,应用中心复合设计-效应面法优化葫芦素B-PLGA载药纳米粒处方;测定了纳米粒的粒径分布和Zeta电位值,通过透射电镜观察其微观形态,并考察了葫芦素B-PLGA载药纳米粒的体外药物释放特性;比较了葫芦素B与葫芦素B-PLGA载药纳米粒对HepG2肝癌细胞的抑制效果。结果 葫芦素B-PLGA载药纳米粒的最优处方组成为：PLGA浓度为9.0%,PVA浓度为2.0%,药物浓度为4.5%,制备的纳米粒粒径为（145.4±15.8） nm,Zeta电位值为（-7.6±0.8） mV;透射电镜下可观察到纳米粒表面光滑,分布均匀;葫芦素B-PLGA载药纳米粒释药前期出现突释,后期平缓,48 h药物释放达到86%;葫芦素B-PLGA载药纳米粒对HepG2肝癌细胞的抑制作用显著高于葫芦素B。结论 葫芦素B-PLGA载药纳米粒可延缓药物释放,提高对HepG2肝癌细胞的抑制活性,为进一步临床研究奠定实验基础。     

Fluphenazine release from biodegradable microparticles: Characterization and modelling of release

Abstract

The release of actives encapsulated in biodegradable poly-lactide-co-glycolide (PLGA)-based microparticles may be diffusion controlled, dependent on polymer degradation, or may occur by a combination of drug diffusion and polymer degradation. This report applies a model, describing combined diffusional and polymer degradation-assisted drug release, to quantify the release of fluphenazine HCl (F-HCl) from PLGA microspheres. Parameters for the release process showed that both the initial drug release phase and the polymer controlled drug release phase were dependent on the F-HCl loading of the microspheres. The percentage drug released in the burst phase and the length of the lag phase were dependent on F-HCl loading. In the degradation controlled release phase, drug release was faster the higher the loading, as shown by the decrease in t_max from 27 to 10 days, as F-HCl loadings increased from 4.2 to 16.6%w/w. The presence of F-HCl was found to catalyse the degradation of PLGA polymer during particle manufacture and during dissolution. When compared to drug free microspheres, F-HCl accelerated PLGA degradation as shown by the ～5-fold increase in both PLGA degradation rate constant (k) and reduction in t_max.     

Preparation of naproxen–ethyl cellulose microparticles by spray-drying technique and their application to textile materials

Abstract

The objective of this study is to develop a new textile-based drug delivery system containing naproxen (NAP) microparticles and to evaluate the potential of the system as the carrier of NAP for topical delivery. Microparticles were prepared by spray-drying using an aqueous ethyl cellulose dispersion. The drug content and entrapment efficiency, particle size and distribution, particle morphology and in vitro drug release characteristics of microparticles were optimized for the application of microparticles onto the textile fabrics. Microparticles had spherical shape in the range of 10–15?μm and a narrow particle size distribution. NAP encapsulated in microparticles was in the amorphous or partially crystalline nature. Microparticles were tightly fixed onto the textile fabrics. In vitro drug release exhibited biphasic release profile with an initial burst followed by a very slow release. Skin permeation profiles were observed to follow near zero-order release kinetics.     

Release optimization of epidermal growth factor from PLGA microparticles

Abstract

The objective of this study was to prepare poly lactic-co-glycolic acid (PLGA)-based microparticles as potential carriers for recombinant human epidermal growth factor (rhEGF). In order to optimize characteristic parameters of protein-loaded microspheres, bovine serum albumin (BSA) was selected as the model protein. To reduce burst release as a common problem of microspheres, a proper alteration in the particle composition was used, such as addition of poly vinyl alcohol and changes in initial drug loading. The effects of these parameters on particle size, encapsulation efficiency and in vitro release kinetics of BSA in PLGA microspheres were investigated using a Box–Behnken response surface methodology. The biological activity of the released rhEGF was assessed using human skin fibroblasts cell proliferation assay. The prepared rhEGF-loaded microspheres had an average size of 6.44?±?2.45?µm, encapsulation efficiency of 97.04?±?1.13%, burst release of 13.06?±?1.35% and cumulative release of 22.56?±?2.41%. The proliferation of human skin fibroblast cells cultivated with rhEGF releasate of microspheres was similar to that of pure rhEGF, indicating the biological activity of released protein confirming the stability of rhEGF during microsphere preparation. These results are in agreement with the purpose of our study to prepare rhEGF-entrapped PLGA microparticles with optimized characteristics.     

β-methasone-containing biodegradable poly(lactide-co-glycolide) acid microspheres for intraarticular injection: effect of formulation parameters on characteristics and in vitro release

A sustained drug release system based on the injectable poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with β-methasone was prepared for localized treatment of rheumatic arthritis. The microscopy and structure of microspheres were characterized by scanning electron microscope (SEM) and Fourier transform infrared (FTIR). The effects of various formulation parameters on the properties of microspheres and in vitro release pattern of β-methasone were also investigated. The results demonstrated that increase in drug/polymer ratio led to increased particle size as well as drug release rate. Increase in PLGA concentration led to increased particle size, but decreased burst release. The drug encapsulation efficiency increased sharply by increasing polyvinyl alcohol (PVA) concentration in the aqueous phase from 1.5 to 2.0%. β-methasone release rate decreased considerately with decreasing OP (organic phase)/AP (aqueous phase) volume ratio. Stirring rate had significantly influence on the particle size and encapsulation efficiency. Independent of formulation parameters, β-methasone was slowly released from the PLGA microspheres over 11 days. The drug release profile of high drug loaded microspheres agree with Higuchi equation with a release mechanism of diffusion and erosion, that of middle drug loaded microspheres best agreed with Hixcon-Crowell equation and controlled by diffusion and erosion as well. The low drug loaded microspheres well fitted to logarithm normal distribution equation with mechanism of purely Fickian diffusion.     

Formulation,characterization and evaluation of cyclodextrin-complexed bendamustine-encapsulated PLGA nanospheres for sustained delivery in cancer treatment

PLGA nanospheres are considered to be promising drug carrier in the treatment of cancer. Inclusion complex of bendamustine (BM) with epichlorohydrin beta cyclodextrin polymer was prepared by freeze-drying method. Phase solubility study revealed formation of A_L type complex with stability constant (Ks?=?645?M^?1). This inclusion complex was encapsulated into PLGA nanospheres using solid-in-oil-in-water (S/O/W) technique. The particle size and zeta potential of PLGA nanospheres loaded with cyclodextrin-complexed BM were about 151.4?±?2.53?nm and???31.9?±?(?3.08)?mV. In-vitro release study represented biphasic release pattern with 20% burst effect and sustained slow release. DSC studies indicated that inclusion complex incorporated in PLGA nanospheres was not in a crystalline state but existed in an amorphous or molecular state. The cytotoxicity experiment was studied in Z-138 cells and IC₅₀ value was found to be 4.3?±?0.11?µM. Cell viability studies revealed that the PLGA nanospheres loaded with complex exerts a more pronounced effect on the cancer cells as compared to the free drug. In conclusion, PLGA nanospheres loaded with inclusion complex of BM led to sustained drug delivery. The nanospheres were stable after 3 months of storage conditions with slight change in their particle size, zeta potential and entrapment efficiency.     

Poly(D,L-lactide-co-glycolide) encapsulated poly(vinyl alcohol) hydrogel as a drug delivery system

Purpose. The efficiency of encapsulation of water-soluble drugs in biodegradable polymer is often low and occasionally these microcapsules are associated with high burst effect. The primary objective of this study is to develop a novel microencapsulation technique with high efficiency of encapsulation and low burst effect. Method. Pentamidine was used as a model drug in this study. Pentamidine/polyvinyl alcohol (PVA) hydrogel was prepared by freeze-thaw technique. Pentamidine loaded hydrogel was later microencapsulated in poly(lactide-co-glycolide) (PLGA) using solvent evaporation technique. The microcapsules were evaluated for the efficiency of encapsulation, particle size, surface morphology, thermal characteristic, and drug release. Results. Scanning Electron Microscope (SEM) studies revealed that the microcapsules were porous. The microcapsules were uniform in size and shape with the median size of the microcapsules ranging between 27 and 94 m. The samples containing 10% PLGA showed nearly three times increase in drug loading (18-53%) by increasing the hydrogel content from 0-6%. The overall drug release from the microencapsulated hydrogel, containing 3% and 6% PVA, respectively, was significantly lower than the control batches. Conclusions. The use of a crosslinked hydrogel such as PVA can significantly increase the drug loading of highly water-soluble drugs. In addition, incorporation of the PVA hydrogel significantly reduced the burst effect and overall dissolution of pentamidine.     

Design and Development of a Novel Controlled Release PLGA Alginate-Pectinate Polyspheric Drug Delivery System

A 23 full factorial design was employed to evaluate and optimize the drug entrapment efficiency and in vitro drug release from PLGA microparticles encapsulated in a complex crosslinked alginate-pectinate matrix (polysphere). The independent formulation variables included the volume of internal and external phases, and concentration of PLGA. Surface morphology and internal structure of PLGA microparticles and polyspheres were examined by scanning electron microscopy which revealed spherical PLGA microparticles with highly porous surfaces that accounted for the rapid burst effect of this system. Texture analysis was used to profile the matrix resilience, tolerance, and energy absorbed. In vitro drug release was assessed in buffer media on PLGA microparticles and polyspheres. Polyspheres exhibited ideal zero-order release while PLGA microparticles had a burst effect followed by lag phase. Kinetic modeling of in vitro drug release data indicated that formulations were not highly dependent on polymeric erosion as a mechanism for drug release but rather diffusion. A close correlation existed between the matrix tolerance and energy absorbed. Formulations with decreased tolerance absorbed less energy, thus led to rapid surface erosion, lower matrix integrity and hence a burst effect. The converse was true for an increased matrix tolerance, which led to zero-order release supported by superior matrix integrity and a significantly reduced burst effect. The rat subcutaneous model validated in vitro release data and demonstrated that the polyspheres provided flexible yet superior rate-modulated drug delivery.     

Proprietary Rel-Ease™ drug delivery technology: opportunity for sustained delivery of peptides,proteins and small molecules

Proprietary Rel-Ease? (Praecis Pharmaceuticals) drug delivery technology uses biocompatible polymers as carriers to incorporate a drug into a polymer matrix through opposite charge interaction or complexation. The resulting low solubility complexes can be used to prepare sustained release depot injections or potentially sustained release formulations for oral administration. As a regulatory approved and commercialised drug delivery technology, Rel-Ease is used in abarelix for injectable suspension, a monthly depot injection for the treatment of patients with advanced prostate cancer. The technology offers high drug loading and minimal-to-no initial burst effect in vivo. It uses aqueous processes and is compatible for complexation with many peptide and protein therapeutics; its mechanism can also be applied to many small-molecule therapeutics and offers conventional and alternative methods for sustained release delivery via an oral route.     

Preparation and Characterization of Poly (D,L-Lactide-Co-Glycolide) Microspheres for Controlled Release of Poly(L-Lysine) Complexed Plasmid DNA

Purpose. To produce and characterize controlled release formulations of plasmid DNA (pDNA) loaded in poly (D,L-lactide-co-glycolide) (PLGA) microspheres both in free form and as a complex with poly (L-lysine). Methods. Poly (L-lysine) (PLL) was used to form pDNA/PLL complexes with complexation ratio of 1:0.125 and 1:0.333 w/w to enhance the stability of pDNA during microsphere preparation and protect pDNA from nuclease attack. pDNA structure, particle size, zeta potential, drug loading, in vitro release properties, and protection from DNase I were studied. Results. The microspheres were found to be spherical with average particle size of 3.1-3.5 m. Drug loading of 0.6% was targeted. Incorporation efficiencies of 35.1% and 29.4-30.6% were obtained for pDNA and pDNA/PLL loaded microspheres respectively. Overall, pDNA release kinetics following the initial burst did not correlate with blank microsphere polymer degradation profile suggesting that pDNA release is convective diffusion controlled. The percentage of supercoiled pDNA in the pDNA and pDNA/PLL loaded microspheres was 16.6 % and 76.7-85.6% respectively. Unencapsulated pDNA and pDNA/PLL degraded completely within 30 minutes upon the addition of DNase I. Encapsulation of DNA/PLL in PLGA microspheres protected pDNA from enzymatic degradation. Conclusions. The results show that using a novel process, pDNA can be stabilized and encapsulated in PLGA microspheres to protect pDNA from enzymatic degradation.     

Effect of poly(ethylene glycol) content and formulation parameters on particulate properties and intraperitoneal delivery of insulin from PLGA nanoparticles prepared using the double-emulsion evaporation procedure

Abstract

Context: Size, encapsulation efficiency and stability affect the sustained release from nanoparticles containing protein-type drugs.

Objectives: Insulin was used to evaluate effects of formulation parameters on minimizing diameter, maximizing encapsulation efficiency and preserving blood glucose control following intraperitoneal (IP) administration.

Methods: Homogenization or sonication was used to incorporate insulin into poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles with increasing poly(ethylene glycol) (PEG) content. Effects of polymer type, insulin/polymer loading ratio and stabilizer in the internal aqueous phase on physicochemical characteristics of NP, in vitro release and stability of encapsulated insulin were investigated. Entrapment efficiency and release were assessed by radioimmunoassay and bicinconnic acid protein assay, and stability was evaluated using SDS-PAGE. Bioactivity of insulin was assessed in streptozotocin-induced, insulin-deficient Type I diabetic mice.

Results: Increasing polymeric PEG increased encapsulation efficiency, while the absence of internal stabilizer improved encapsulation and minimized burst release kinetics. Homogenization was shown to be superior to sonication, with NP fabricated from 10% PEG–PLGA having higher insulin encapsulation, lower burst release and better stability. Insulin-loaded NP maintained normoglycaemia for 24?h in diabetic mice following a single bolus, with no evidence of hypoglycemia.

Conclusions: Insulin-loaded NP prepared from 10% PEG–PLGA possessed therapeutically useful encapsulation and release kinetics when delivered by the IP route.     

Production of haloperidol-loaded PLGA nanoparticles for extended controlled drug release of haloperidol

This study developed an emulsion-solvent evaporation method for producing haloperidol-loaded PLGA nanoparticles with up to 2% (wt/wt. of polymer) drug content, in vitro release duration of over 13 days and less than 20% burst release. The free haloperidol is removed from the nanoparticle suspension using a novel solid phase extraction technique. This leads to a more accurate determination of drug incorporation efficiency than the typical washing methods. It was discovered that PLGA end groups have a strong influence on haloperidol incorporation efficiency and its release from PLGA nanoparticles. The hydroxyl-terminated PLGA (uncapped) nanoparticles have a drug incorporation efficiency of more than 30% as compared to only 10% with methyl-terminated PLGA (capped) nanoparticles. The in vitro release profile of nanoparticles with uncapped PLGA has a longer release period and a lower initial burst as compared to capped PLGA. By varying other processing and materials parameters, the size, haloperidol incorporation and haloperidol release of the haloperidol-loaded PLGA nanoparticles were controlled.     

Controlling the in vitro release profiles for a system of haloperidol-loaded PLGA nanoparticles

We have used a systematic methodology to tailor the in vitro drug release profiles for a system of PLGA/PLA nanoparticles encapsulating a hydrophobic drug, haloperidol. We applied our previously developed sonication and homogenization methods to produce haloperidol-loaded PLGA/PLA nanoparticles with 200-1000 nm diameters and 0.2-2.5% drug content. The three important properties affecting release behavior were identified as: polymer hydrophobicity, particle size and particle coating. Increasing the polymer hydrophobicity reduces the initial burst and extends the period of release. Increasing the particle size reduces the initial burst and increases the rate of release. It was also shown that coating the particles with chitosan significantly reduces the initial burst without affecting other parts of the release profile. Various combinations of the above three properties were used to achieve in vitro release of drug over a period of 8, 25 and >40 days, with initial burst <25% and a steady release rate over the entire period of release. Polymer molecular weight and particle drug content were inconsequential for drug release in this system. Experimental in vitro drug release data were fitted with available mathematical models in literature to establish that the mechanism of drug release is predominantly diffusion controlled. The average value of drug diffusivities for PLGA and PLA nanoparticles was calculated and its variation with particle size was established.     

Preparation and in Vitro/in Vivo Evaluation of Insulin-Loaded Poly(Acryloyl-Hydroxyethyl Starch)-PLGA Composite Microspheres

Purpose. The purpose of this study was to develop and evaluate a novel composite microsphere delivery system composed of poly(D,L-lactide-co-glycolide) (PLGA) and poly(acryloyl hydroxyethyl starch) (acryloyl derivatized HES; AcHES) hydrogel using bovine insulin as a model therapeutic protein. Methods. Insulin was incorporated into the AcHES hydrogel microparticles by a swelling technique, and then the insulin-containing AcHES microparticles were encapsulated in a PLGA matrix using a solvent extraction/evaporation method. The composite microspheres were characterized for loading efficiency, particle size, and in vitro protein release. Protein stability was examined by sodium dodecyl sulfate polyacrylamide gel electrophoresis, high-performance liquid chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The hydrogel dispersion process was optimized to reduce the burst effect of microspheres and avoid hypoglycemic shock in the animal studies in which the serum glucose and insulin levels as well as animal body weight were monitored using a diabetic animal model. Results. Both the drug incorporation efficiency and the in vitro release profiles were found to depend upon the preparation conditions. Sonication effectively dispersed the hydrogel particles in the PLGA polymer solution, and the higher energy resulted in microspheres with a lower burst and sustained in vitro release. Average size of the microspheres was around 22 m and the size distribution was not influenced by sonication level. High-performance liquid chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis, along with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry showed the retention of insulin stability in the microspheres. Subcutaneous administration of microspheres provided glucose suppression <200 mg/dL for 810 days with hyperglycemia recurring by day 16. During the treatment, the time points with higher serum insulin level were consistent with a more significant glucose suppression. The microsphere-treated rats also grew virtually at the same rate as normal control until the insulin level declined and hyperglycemia returned. Multiple dosing given every 10 days demonstrated that the pharmacological effect and serum insulin levels from second or third doses were similar and comparable to that of the first dose. Conclusion. The AcHES-PLGA composite microsphere system provides satisfactory in vitro and in vivo sustained release performance for a model protein, insulin, to achieve 10-day glucose suppression.     

The Stability of Recombinant Human Growth Hormone in Poly(lactic-co-glycolic acid) (PLGA) Microspheres

Purpose. The development of a sustained release formulation for recombinant human growth hormone (rhGH) as well as other proteins requires that the protein be stable at physiological conditions during its in vivo lifetime. Poly(lactic-co-glycolic acid) (PLGA) microspheres may provide an excellent sustained release formulation for proteins, if protein stability can be maintained. Methods. rhGH was encapsulated in PLGA microspheres using a double emulsion process. Protein released from the microspheres was assessed by several chromatrographic assays, circular dichroism, and a cell-based bioassay. The rates of aggregation, oxidation, diketopiperazine formation, and deamidation were then determined for rhGH released from PLGA microspheres and rhGH in solution (control) during incubation in isotonic buffer, pH 7.4 and 37°C. Results. rhGH PLGA formulations were produced with a low initial burst (<20%) and a continuous release of rhGH for 30 days. rhGH was released initially from PLGA microspheres in its native form as measured by several assays. In isotonic buffer, pH 7.4 and 37°C, the rates of rhGH oxidation, diketopiperazine formation, and deamidation in the PLGA microspheres were equivalent to the rhGH in solution, but aggregation (dimer formation) occured at a slightly faster rate for protein released from the PLGA microspheres. This difference in aggregation rate was likely due to the high protein concentration used in the encapsulation process. The rhGH released was biologically active throughout the incubation at these conditions which are equivalent to physiological ionic strength and pH. Conclusions. rhGH was successfully encapsulated and released in its fully bioactive form from PLGA microspheres over 30 days. The chemical degradation rates of rhGH were not affected by the PLGA microspheres, indicating that the internal environment of the microspheres was similar to the bulk solution. After administration, the microspheres should become fully hydrated in the subcutaneous space and should experience similar isotonic conditions and pH. Therefore, if a protein formulation provides stability in isotonic buffer, pH 7.4 and 37°C, it should allow for a safe and efficacious sustained release dosage form in PLGA microspheres.     

Development of multiple-layer polymeric particles for targeted and controlled drug delivery

The purpose of this work was to develop multilayered particles consisting of a magnetic core and two encompassing shells made up of poly(N-isopropylacrylamide) (PNIPAAm) and poly(d,l-lactide-co-glycolide) (PLGA) for targeted and controlled drug delivery. Transmission electron microscopy confirmed that multilayered particles were obtained with PNIPAAm magnetic nanoparticles embedded within the PLGA shell. Factorial analysis studies also showed that the particle size was inversely proportional to the surfactant concentration and sonication power and directly proportional to the PLGA concentration. Drug-release results demonstrated that these multilayer particles produced an initial burst release and a subsequent sustained release of both bovine serum albumin (BSA) and curcumin loaded into the core and shell of the particle, respectively. BSA release was also affected by changes in temperature. In conclusion, our results indicate that the multilayered magnetic particles could be synthesized and used for targeted and controlled delivery of multiple drugs with different release mechanisms.From the Clinical EditorAuthors demonstrate the synthesis of multilayered particles consisting of a magnetic core and two encompassing shells made up of poly (N-isopropylacrylamide) (PNIPAAm) and poly(D, L-lactide-co-glycolide) (PLGA) for targeted and controlled drug delivery. The presented results indicate successful synthesis and application for targeted and controlled delivery of multiple drugs with different release mechanisms.     

Effects of formulation factors on encapsulation efficiency and release behaviour in vitro of huperzine A-PLGA microspheres

To develop a long-acting injectable huperzine A-PLGA microsphere for the chronic therapy of Alzheimer's disease, the microsphere was prepared by using an o/w emulsion solvent extraction evaporation method based on a series of formulation design of the emulsion. The dialysis method was used for release analysis. The encapsulation efficiency and release amount of the microspheres were determined by a UV/VIS spectrophotometer. The morphology of the microspheres was observed by scanning electron microscopy. The distribution of the drug within microspheres was observed by a confocal laser scanning microscope. The results indicated that the PLGA 15?000 microspheres possessed a smooth and round appearance with average particle size of 50?µm or so. The encapsulation percentages of microspheres prepared from PLGA 15?000, 20?000 and 30?000 were 62.75%, 27.52% and 16.63%, respectively. The drug release percentage during the first day decreased from 22.52% of PLGA 30?000 microspheres to 3.97% of PLGA 15?000 microspheres, the complete release could be prolonged to 3 weeks. The initial burst release of microspheres with higher molecular weight PLGA could be explained by the inhomogeneous distribution of drug within microspheres. The encapsulation efficiency of the microspheres improved as the polymer concentration increased in the oil phase and PVA concentration decreased in the aqueous phase. The burst release could be controlled by reducing the polymer concentration. Evaporation temperature had a large effect on the drug release profiles. It had better be controlled under 30°C. Within a certain range of particle size, encapsulation efficiency decreased and drug release rate increased with the reducing of the particle size.     

Preparation of PEG-grafted immunomagnetoliposomes entrapping citrate stabilized magnetite particles and their application in CD34+ cell sorting

Abstract

Novel polylactide (PLA) microspheres endowed with hydrophilic and bioadhesive surfaces as injectable formulations for the controlled release of fenretinide were prepared, using a novel technique based on the co-precipitation of PLA with gelatin, at the interface of a liquid dispersion formed by the addition of N-methylpyrrolidone containing PLA and dextrin (DX), towards an aqueous solution of gelatin (G). The resulting PLA–G–DX microspheres were compared with others prepared by the same technique using polylactide-co-glycolide (PLGA), with or without DX, and with or without phosphatidylcholine. Of the different systems, the PLA–G–DX microspheres had the best morphological, dimensional and functional characteristics. They had the highest drug loading, and their drug release was the most efficient over time without any burst effect. Their in vitro anti-tumoural activity was strongly enhanced with respect to the pure fenretinide. This paralleled the increased drug concentration inside the cells due to their marked bioadhesion to the tumour cell membranes as indicated by scanning electron microscope images.