Bio-Oss collagen in the buccal gap at immediate implants: a 6-month study in the dog

Background: Following tooth extraction and immediate implant installation, the edentulous site of the alveolar process undergoes substantial bone modeling and the ridge dimensions are reduced. Objective: The objective of the present experiment was to determine whether the process of bone modeling following tooth extraction and immediate implant placement was influenced by the placement of a xenogenic graft in the void that occurred between the implant and the walls of the fresh extraction socket. Material and methods: Five beagle dogs about 1 year old were used. The 4th premolar in both quadrants of the mandible (₄P₄) were selected and used as experimental sites. The premolars were hemi‐sected and the distal roots removed and, subsequently, implants were inserted in the distal sockets. In one side of the jaw, the marginal buccal‐approximal void that consistently occurred between the implant and the socket walls was grafted with Bio‐Oss^® Collagen while no grafting was performed in the contra‐lateral sites. After 6 months of healing, biopsies from each experimental site were obtained and prepared for histological analyses. Results: The outline of the marginal hard tissue of the control sites was markedly different from that of the grafted sites. Thus, while the buccal bone crest in the grafted sites was comparatively thick and located at or close to the SLA border, the corresponding crest at the control sites was thinner and located a varying distance below SLA border. Conclusions: It was demonstrated that the placement of Bio‐Oss^® Collagen in the void between the implant and the buccal‐approximal bone walls of fresh extraction sockets modified the process of hard tissue healing, provided additional amounts of hard tissue at the entrance of the previous socket and improved the level of marginal bone‐to‐implant contact. To cite this article:
Araújo MG, Linder E, Lindhe J. Bio‐Oss^® Collagen in the buccal gap at immediate implants: a 6‐month study in the dog.
Clin. Oral Impl. Res. 22 , 2011; 1–8.
doi: 10.1111/j.1600‐0501.2010.01920.x     

Oral implants placed in bone defects treated with Bio‐Oss®, Ostim®‐Paste or PerioGlas: an experimental study in the rabbit tibiae

Objectives: To compare the histological features of bone filled with Bio‐Oss^®, Ostim‐Paste^® or PerioGlas placed in defects in the rabbit tibiae by evaluating bone tissue composition and the integration of titanium implants placed in the grafted bone. Material and methods: Two cylindrical bone defects, about 4 mm in diameter and 6 mm in depth, were created in the tibiae of 10 rabbits. The defects were filled with either Bio‐Oss^®, PerioGlas, Ostim^®‐Paste or left untreated, and covered with a collagen membrane. Six weeks later, one titanium sandblasted and acid‐etched (SLA) implant was inserted at the centre of each previously created defect. The animals were sacrificed after 6 weeks of healing. Results: Implants placed in bone previously grafted with Bio‐Oss^®, PerioGlas or Ostim^®‐Paste obtained a larger extent of osseointegration, although not statistically significant, than implants placed in non‐grafted bone. The three grafting materials seemed to perform in a similar way concerning their contribution towards implant osseointegration. All grafting materials appeared to be osteoconductive, thus leading to the formation of bridges of mineralized bone extending from the cortical plate towards the implants surface through the graft scaffold. Conclusions: Grafting with the above‐mentioned biomaterials did not add any advantage to the osseointegration of titanium SLA implants in a self‐contained defect.     

The effect of permanent grafting materials on the preservation of the buccal bone plate after tooth extraction: an experimental study in the dog

Objectives: The aim of the present study was to evaluate the effects of a novel bone substitute system (Natix^®), consisting of porous titanium granules (PTG) and a bovine‐derived xenograft (Bio‐Oss^®), on hard tissue remodelling following their placement into fresh extraction sockets in dogs. Material and methods: Six modalities were tested; Natix^® granules with and without a covering double‐layered Bio Gide^® membrane; Bio‐Oss^® with and without a covering double‐layered Bio Gide^® membrane; and a socket left empty with and without a covering double‐layered Bio Gide^® membrane. Linear measurements, indicative of buccal bone height loss, and an area measurement indicative of buccal bulk bone loss were made. The statistical analysis was based on the Latin Square design with two blocking factors (dog and site). Tukey's post hoc test was used to adjust for multiple comparisons. Results: Histological observation revealed that while bone formed around both the xenograft and the titanium particles, bone was also noted within titanium granules. Of the five modalities of ridge preservation techniques used in this study, no one technique proved to be superior. Conclusion: The titanium granules were observed to have promising osseoconductive properties. To cite this article:
Bashara H, Wohlfahrt JC, Polyzois I, Lyngstadaas SP, Renvert S, Claffey N. The effect of permanent grafting materials on the preservation of the buccal bone plate after tooth extraction: an experimental study in the dog.
Clin. Oral Impl. Res. 23 , 2012; 911–917
doi: 10.1111/j.1600‐0501.2011.02240.x     

The effects of bone grafting material and a collagen membrane in the ridge splitting technique: an experimental study in dogs

Objectives: This study was designed to evaluate the effect of bone graft materials and collagen membranes in ridge splitting procedures with immediate implant placement using a dog model. Materials and methods: Mandibular premolars were extracted in five beagle dogs. After 3 months, ridge splitting and placement of three OsseoSpeed^? implants were performed bilaterally. The gaps between the implants were allocated according to the following eight treatment modalities; Group 1(no graft), Group 2 (autogenous bone), Group 3 (Bio‐Oss^® Collagen), Group 4 (Bio‐Oss^®), Group 5 (no graft+BioGide^®), Group 6 (autogenous bone+BioGide^®), Group 7 (Bio‐Oss^® Collagen+BioGide^®), and Group 8 (Bio‐Oss^®+BioGide^®). The dogs were sacrificed after 8 or 12 weeks and the specimens were analyzed histologically and histometrically. Results: The gaps between the implants were filled with the newly formed bone, irrespective of which of the eight grafting techniques was used. Group 1 revealed a significantly lower percentage of bone‐to‐implant contact (BIC) than Group 5 at 8 and 12 weeks (P<0.05). Group 1 showed the most prominent marginal bone loss (MBL) at 12 weeks (P<0.05). Regarding the use of membranes, Groups 1 and 2 showed significantly more MBL than Groups 5 and 6 at 12 weeks (P<0.05). Conclusions: After ridge splitting, if the gaps between implants were grafted or covered with collagen membranes, a higher percentage of BIC was obtained. Based on our results, we suggest that the use of bone graft materials and/or collagen membranes is better for the prevention of MBL after ridge splitting procedures. To cite this article:
Han J‐Y, Shin S‐I, Herr Y, Kwon Y‐H, Chung J‐H. The effects of bone grafting material and a collagen membrane in the ridge splitting technique: an experimental study in dogs.
Clin. Oral Impl. Res. xx , 2011; 000–000
doi: 10.1111/j.1600‐0501.2010.02127.x     

Effect of Bio-Oss with or without platelet-derived growth factor on bone formation by "guided tissue regeneration": a pilot study in rats

Aim: To investigate the effect of Bio‐Oss^® with and without the local application of recombinant human platelet‐derived growth factor (rhPDGF‐BB) on bone formation under Teflon capsules. Materials and Methods: Eight male, 6‐month‐old, Wistar strain rats were used in the study. In each animal, the lateral aspect of the mandibular ramus was exposed and small perforations were produced in the bone. A rigid, non‐porous hemispherical teflon capsule (diameter 7 mm) was placed on the ramus in both sides of the animals. The capsule placed on the one side of the jaw was filled with Bio‐Oss^® granules soaked in a solution of PDGF‐BB (20 μg/capsule) and autogenous blood prior to placement. The capsules placed on the other side of the jaw were filled with Bio‐Oss^® granules soaked in autogenous blood only (controls). Four rats were sacrificed after 3 months and the remaining four after 5 months. Undecalcified sections containing the capsule and surrounding tissues were prepared and analysed in the microscope. Results: Histologic analysis revealed limited amounts of bone formation. Most of the space underneath the capsules was occupied by Bio‐Oss^® particles surrounded by fibrovascular connective tissue. Given the small sample size statistical analysis was not possible, however, the mean amount of mineralized new bone in the control group (20.8%) appeared to be larger than that in the test group (6.7%). After 5 months the amount of newly formed bone appeared similar in the two groups (23.0% test, 26.0% controls). The Bio‐Oss^® particles occupied between 31.4% and 41.1% of the capsule area at 3 months and between 34.0% and 34.7% at 5 months. Only particles adjacent to the mandibular ramus were incorporated in newly formed bone. Conclusion: Limited bone formation was present in the capsules grafted with Bio‐Oss^® with or without the growth factor.     

Sinus augmentation analysis revised: the gradient of graft consolidation

Objective: Graft consolidation follows a gradient that reflects the properties of bone substitutes at sites of sinus augmentation. Here we present an analytical method to investigate the process of graft consolidation taking the distance from the maxillary host bone into account. Material and methods: We therefore evaluated histological specimens, 6 and 12 weeks after the sinus of minipigs was augmented with Bio‐Oss^®, a deproteinized bovine bone mineral, and Ostim^®, an aqueous paste of synthetic nanoparticular hydroxyapatite. A curve was drawn that represents the changes in histomorphometric parameters within a given distance from the maxillary host bone. Results: Based on this curve, three regions of interest were defined: R1 (0–1 mm) the bridging distance where new bone is laid onto the host bone, R2 (2–3 mm) a region of osteoconduction where new bone exclusively grows on the biomaterial, R3 (4–5 mm) and a region of osteoconduction where bone formation has reached its maximal extension. Qualitative and quantitative analysis of the three regions can reveal differences in graft consolidation, depending on the bone substitutes and the observation period [Bone volume (BV) per tissue volume after 6 weeks: R1: 19±8.4% for Bio‐Oss^® and 42.9±13.2% for Ostim^® (P=0.03), R2: 3±2.4% for Bio‐Oss^® and 14.7±9.5% for Ostim^® (P=0.03), R3: 5±4.1% for Bio‐Oss^® and 5.3±5.3% for Ostim^® (P=0.86). BV per tissue volume after 12 weeks: R1: 38.0±13.3% for Bio‐Oss^® and 53.3±6.6 for Ostim^® (P=0.04), R2: 14±12.2 for Bio‐Oss^® and 26.4±11 for Ostim^® (P=0.18), R3: 6.6±7 for Bio‐Oss^® and 10.7±5.8 for Ostim^® (P=0.32) after 12 weeks]. Conclusion: Based on the graft consolidation gradient, the impact of bone substitutes to modulate the process of bone formation and the kinetic of degradation within a distinct region of the augmented sinus can be investigated.     

Maxillary sinus augmentation using xenogenic bone substitute material Bio-Oss in combination with venous blood. A histologic and histomorphometric study in humans

The aim of the present study was to evaluate bone formation following maxillary sinus augmentation using bovine bone substitute material Bio‐Oss^® in combination with venous blood by means of histologic and histomorphometric examination of human biopsies. This involved a total of 15 sinus floor elevation procedures being carried out on 11 patients (average age of 49.6 years) according to the technique described by Tatum (1986). The subantral sinus cavity was augmented using bovine apatite combined with venous blood. After an average healing phase of 6.8 months, trephine burrs were used to take 22 bone biopsies from the augmented sinus region. Then 38 Brånemark^® implants were inserted in both the osteotomies resulting from bone sampling and in regular sites in the augmented posterior maxilla. Histomorphometric analysis of ground sections from the bone biopsies prepared according to the standard method of Donath & Breuner (1982) produced an average percentage of newly‐formed bone of 14.7% (±5.0%) and a proportion of residual xenogenic bone substitute material of 29.7% (±7.8%). Some 29.1% (±8.1%) of the surface of the Bio‐Oss^® granulate was in direct contact with newly‐formed bone. Histologically, newly‐developed bone became evident, partly invaginating the particles of apatite and forming bridges in the form of trabeculae between the individual Bio‐Oss^® particles. Despite the absence of osteoclastic activity, the inward growth of bone indicates slow resorption of the xenogenic bone graft material. When the implants were uncovered, after an average healing phase of 6 months, 4 of the 38 implants had become loose. Of these 4 implants, 1 had to be subsequently explanted, while the others remained as “sleeping implants” and were not included in the implants superstructure. Thus, the resulting clinical survival rate, prior to prosthetic loading, was 89.5%.     

Effect of grafting materials on osseointegration of dental implants surrounded by circumferential bone defects. An experimental study in the dog

Aims: This study was designed to evaluate the effect of gap width and graft placement on bone healing around implants placed into simulated extraction sockets in the mandibles of four beagle dogs. Materials and methods: Four Ti‐Unite^® implants (13 mm × 3.3 mm) were placed on each side of the mandible. Three implants were surrounded by a 1.35 mm circumferential and a 5 mm deep gap around the coronal portion of the implants. A fourth implant was inserted conventionally into both sides of the mandibles as a positive control. The gaps were filled with either Bio‐Oss^®, autogenous bone or with a blood clot alone. The study design was balanced for animal, side and modality. Ground sections were prepared from biopsies taken at 3 months, and computer‐aided histometric measurements of bone/implant contact and area of bone within threads were made for the coronal 5 mm. Data were analysed using analysis of variance. Results: The mean bone/implant contact was 9.8 mm for the control and ranged from 9.3 to 11.3 mm for the three test modalities. The corresponding values for area within threads were 1 mm² and 1–1.2 mm². Modality had a significant effect on both bone/implant contact (F=16.9; P<0.0001) and area within threads (F=16.7; P<0.0001). Conclusion: The results of this study suggest that both autogenous bone graft and Bio‐Oss^® played an important role in the amount of hard tissue fill and osseointegration occurring within marginal bone defects around implants.     

Bone healing around implants placed in a jaw defect augmented with Bio-Oss. An experimental study in dogs

The present experiment was carried out to study some tissue reactions around implants that were placed in an edentulous ridge which had been augmented with deproteinized natural bovine cancellous bone mineral. In 4 male beagle dogs, the premolars in the right side of the mandible were extracted and a large buccal ridge defect was created by mechanical means. The bone plate at the lingual aspect of the defect was left intact. 5 months later, the distal 2/3 of the defect area was augmented with Bio‐Oss^® (Geistlich Sons Ltd, Wolhusen, Switzerland) mixed with a fibrin sealer (Tisseel^®, Immuno AG, Vienna, Austria). After 3 months of healing, 3 fixtures (Astra Tech AB, Mölndal, Sweden; TiO‐blast; 8×3.5 mm) were installed in the mandible; 2 were placed in the augmented portion and 1 was placed in the non‐augmented portion of the defect. After a healing period of 3 months, abutment connection was performed and a plaque control period initiated. 4 months later, the dogs were sacrificed and each implant region was dissected. The tissue samples were dehydrated, embedded in plastic, sectioned in the bucco‐lingual plane and examined in the light microscope. It was observed that osseointegration failed to occur to implant surfaces within an alveolar ridge portion previously augmented with Bio‐Oss^®. In the augmented portion of the crest, the graft particles were separated from the host tissue as well as from the implant by a well‐defined connective tissue capsule. Although the lingual aspect of all fixtures (test and control) was in contact with hard tissue at the time of installation, after 4 months of function, a deep vertical bone defect frequently had formed at the lingual surface of the implants. It was concluded that in this model (i) Bio‐Oss^® failed to integrate with the host bone tissue and (ii) no osseointegration occurred to the implants within the augmented portion of the crest.     

Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs

Aim: To compare the influence of autologous or deproteinized bovine bone mineral as grafting material on healing of buccal dehiscence defects at implants installed immediately into the maxillary second incisor extraction socket in dogs. Material and methods: In the maxillary second incisor sockets of 12 Labrador dogs, implants were installed immediately following tooth extraction. A standardized buccal defect was created and autologous bone particles or deproteinized bovine bone mineral were used to fill the defects. A collagen membrane was placed to cover the graft material, and the flaps were sutured to fully submerge the experimental areas. Six animals were sacrificed after 2 months, and six after 4 months of healing. Ground sections were obtained for histological evaluation. Results: After 2 months of healing, all implants were osseointegrated. All buccal dehiscence defects were completely filled after 2 months irrespective of the augmentation material (autologous bone or Bio‐Oss^®) applied. Bone‐to‐implant contact (BIC) on the denuded implant surfaces was within a normal range of 30–40%. However, the newly formed tissue at 2 months was partially resorbed (>50% of the area measurements) after 4 months. Conclusions: Applying either autologous bone or deproteinized bovine bone mineral to dehiscences at implants installed immediately into extraction sockets resulted in high degree of regeneration of the defects with satisfactory BIC on the denuded implant surface. To cite this article:
De Santis E, Botticelli D, Pantani F, Pereira FP, Beolchini M, Lang NP. Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs.
Clin. Oral Impl. Res. 22 , 2011; 430–437.     

Clinical and radiographic characteristics of single‐tooth replacements preceded by local ridge augmentation: a prospective randomized clinical trial

Objectives: To assess in a randomized‐clinical trial the influence of three augmentation techniques (chinbone with or without a Bio‐Gide^® membrane and Bio‐Oss^® with a Bio‐Gide^® membrane) on the clinical and radiographic characteristics of hard and soft tissues around implants and adjacent teeth in the reconstructed maxillary anterior region, up to 1 year after functional loading. Materials and methods: Ninety‐three patients requesting single‐tooth replacement and presenting with a horizontal (bucco‐palatinal) bone deficiency were included. After augmentation, 93 ITI‐Esthetic^Plus implants were placed. Clinical variables, standardized photographs and radiographs were analysed to assess the impact on the levels of the marginal gingiva (MGL) and marginal bone (MBL) around implants and adjacent teeth, viz at pre‐augmentation, pre‐implantation (TPI) and 1 (T₁) and 12 (T₁₂) months after final crown placement. Results: Implant survival was 97.8%. No significant differences were observed in the treatment outcomes of the three augmentation modalities. Combining the three modalities, a slight but significant increase in the implants approximal pocket depth was found between T₁ and T₁₂. Approximal bone loss at the implant between T₁ and T₁₂ was 0.14 ± 0.76 mm (mesial) and 0.14 ± 0.47 mm (distal); the approximal MGL slightly increased (mesial: 0.24 ± 0.46 mm, distal: 0.25 ± 0.66 mm), and the buccal MGL decreased (0.11 ± 0.61 mm). Bone loss at the adjacent teeth, although minor, was significant between TPI and T₁. No correlations were observed in changes of MBL and MGL. Conclusions: None of the three applied augmentation technique procedures influenced the characteristics of the MGL and MBL or the implant survival of single‐tooth replacements. Peri‐implant hard and soft tissues were very stable in the first year after loading.     

Tissue alterations after tooth extraction with and without surgical trauma: a volumetric study in the beagle dog

Objectives: The aim of this study is to evaluate whether tooth extraction without the elevation of a muco‐periosteal flap has advantageous effects on the resorption rate after tooth extraction. Material and Methods: In five beagle dogs polyether impressions were taken before the surgery. The roots of the first and second pre‐molars (P₁ and P₂) were extracted and the sites were assigned to one of the following treatments: treatment group (Tx) 1, no treatment; Tx 2, surgical trauma (flap elevation and repositioning); Tx 3, the extraction socket was filled with BioOss Collagen^® and closed with a free soft‐tissue graft; Tx 4, after flap elevation and repositioning, the extraction socket was treated with BioOss Collagen^® and a free soft‐tissue graft. Impressions were taken 2 and 4 months after surgery. The casts were scanned, matched together with baseline casts and evaluated with digital image analysis. Results: The “flapless groups” demonstrated significant lower resorption rates both when using socket‐preservation techniques and without. Furthermore, socket‐preservation techniques yielded better results compared with not treating the socket. Conclusion: The results demonstrate that leaving the periosteum in place decreases the resorption rate of the extraction socket. Furthermore, the treatment of the extraction socket with BioOss Collagen^® and a free gingival graft seems beneficial in limiting the resorption process after tooth extraction.     

β‐tricalcium phosphate in the early phase of socket healing: an experimental study in the dog

Objectives: The aim of this experiment was to analyze processes involved in the incorporation of β‐tricalcium phospate (TCP) particles in host tissue during healing following tooth extraction and grafting. Material and methods: Five beagle dogs were used. Four premolars in the maxilla (³P³, ²P²) were hemi‐sected, the distal roots were removed and the fresh extraction socket filled with TCP. The tooth extraction and grafting procedures were scheduled in such a way that biopsies representing 1 and 3 days, as well as 1, 2, and 4 weeks of healing could be obtained. Tissue elements such as cells, fibers, vessels, leukocytes and mineralized bone were determined. In deparaffinized sections structures and cells that expressed Tratarate resistant acid phosphate, alkaline phosphatase, and osteopontin were identified by the use of markers. Results: The porosities of the TCP particles were initially filled with erythrocytes that subsequently were replaced with mineralized bone. Some of the graft material was invaded by mesenchymal and inflammatory cells and disintegrated. Thus, small membrane bound granules appeared in the granulation tissue and the provisional matrix. In the process of hard tissue formation, partly mineralized (modified) TCP particles became surrounded by ridges of woven bone. Conclusions: It was demonstrated that the early healing of an extraction socket that had been grafted with β‐TCP involved (i) the formation of a coagulum that was (ii) replaced with granulation tissue and a provisional matrix in which (iii) woven bone could form. In this process the biomaterial was apparently involved. To cite this article:
Araújo MG, Liljenberg B, Lindhe J. β‐tricalcium phosphate in the early phase of socket healing: an experimental study in the dog. Clin. Oral Impl. Res. 21 , 2010; 445–454.
doi: 10.1111/j.1600‐0501.2009.01876.x     

Alveolar ridge preservation with guided bone regeneration and a synthetic bone substitute or a bovine‐derived xenograft: a randomized,controlled clinical trial

Objectives: The aim of this randomized, controlled clinical trial was to compare the potential of a synthetic bone substitute or a bovine‐derived xenograft combined with a collagen membrane to preserve the alveolar ridge dimensions following tooth extraction. Methods: Twenty‐seven patients were randomized into two treatment groups following single tooth extraction in the incisor, canine and premolar area. In the test group, the alveolar socket was grafted with Straumann Bone Ceramic^® (SBC), while in the control group, Bio‐Oss^® deproteinized bovine bone mineral (DBBM) was applied. In both groups, a collagen barrier was used to cover the grafting material. Complete soft tissue coverage of the barriers was not achieved. After 8 months, during re‐entry procedures and before implant placement, the horizontal and vertical dimensions of the residual ridge were re‐evaluated and trephine biopsies were performed for histological analysis in all patients. Results: Twenty‐six patients completed the study. The bucco‐lingual dimension of the alveolar ridge decreased by 1.1±1 mm in the SBC group and by 2.1±1 in the DBBM group (P<0.05). Both materials preserved the mesio‐distal bone height of the ridge. No differences in the width of buccal and palatal bone plate were observed between the two groups. The histological analysis showed new bone formation in the apical part of the biopsies, which, in some instances, was in direct contact with both SBC and DBBM particles. The coronal part of the biopsies was occupied by a dense fibrous connective tissue surrounding the SBC and DBBM particles. Conclusion: Both biomaterials partially preserved the width and the interproximal bone height of the alveolar ridge. To cite this article:
Mardas N, Chadha V, Donos N. Alveolar ridge preservation with guided bone regeneration and a synthetic bone substitute or a bovine‐derived xenograft: a randomized, controlled clinical trial.
Clin. Oral Impl. Res. 21 , 2010; 688–698.     

Ridge alterations following immediate implant placement and the treatment of bone defects with Bio-Oss in an animal model

Background: Conflicting data exist on the outcome of placing Bio‐Oss® (Geitslich Pharm AG, Wolhausen, Switzerland) into extraction sockets. It is therefore relevant to study whether the incorporation of Bio‐Oss into extraction sockets would influence bone healing outcome at the extraction sites. Purpose: The aim of this study was to assess peri‐implant bone changes when implants were placed in fresh extraction sockets and the remaining defects were filled with Bio‐Oss particles in a canine mandible model. Materials and Methods: Six mongrel dogs were used in the study. In one jaw quadrant of each animal, the fourth mandibular premolars were extracted with an elevation of the mucoperiosteal flap; implants were then placed in the fresh extraction sockets and the remaining defects were filled with Bio‐Oss particles. After 4 months of healing, micro‐computed tomography at the implant sites was performed. Osseointegration was calculated as the percent of implant surface in contact with bone. Additionally, bone height was measured in the peri‐implant bone. Results: Average osseointegration was 28.5% (ranged between 14.8 and 34.2%). The mean crestal bone loss was 4.7 ± 2.1 mm on the buccal aspect, 0.4 ± 0.5 mm on the mesial aspect, 0.4 ± 0.3 mm on the distal aspect, and 0.3 ± 0.4 mm on the lingual aspect. Conclusion: The findings from this study demonstrated that the placement of implants and Bio‐Oss® particles into fresh extraction sockets resulted in significant buccal bone loss with low osseointegration.     

Guided bone generation in a rabbit mandible model after periosteal expansion with an osmotic tissue expander

Objectives: To evaluate the space‐maintaining capacity of titanium mesh covered by a collagen membrane after soft tissue expansion on the lateral border of the mandible in rabbits, and to assess bone quantity and quality using autogenous particulate bone or bone‐substitute (Bio‐Oss^®), and if soft tissue ingrowth can be avoided by covering the mesh with a collagen membrane. Material and methods: In 11 rabbits, a self‐inflatable soft tissue expander was placed under the lateral mandibular periosteum via an extra‐oral approach. After 2 weeks, the expanders were removed and a particulated onlay bone graft and deproteinized bovine bone mineral (DBBM) (Bio‐Oss^®) were placed in the expanded area and covered by a titanium mesh. The bone and DBBM were separated in two compartments under the mesh with a collagen membrane in between. The mesh was then covered with a collagen membrane. After 3 months, the animals were sacrificed and specimens were collected for histology. Results: The osmotic soft tissue expander created a subperiosteal pocket and a ridge of new bone formed at the edges of the expanded periosteum in all sites. After the healing period of 3 months, no soft tissue dehiscence was recorded. The mean bone fill was 58.1±18% in the bone grafted area and 56.9±13.7% in the DBBM area. There was no significant difference between the autologous bone graft and the DDBM under the titanium mesh with regard to the total bone area or the mineralized bone area. Scanning electron microscopy showed that new bone was growing in direct contact with the DBBM particles and the titanium mesh. There is a soft tissue ingrowth even after soft tissue expansion and protection of the titanium mesh with a collagen membrane. Conclusion: This study confirms that an osmotic soft tissue expander creates a surplus of periosteum and soft tissue, and that new bone can subsequently be generated under a titanium mesh with the use of an autologous bone graft or DBBM. To cite this article:
Abrahamsson P, Isaksson S, Andersson G. Guided bone generation in a rabbit mandible model after periosteal expansion with an osmotic tissue expander.
Clin. Oral Impl. Res. 22 , 2011; 1282–1288.
doi: 10.1111/j.1600‐0501.2010.02108.x     

Volumetric analysis of extraction sockets using cone beam computed tomography: a pilot study on ex vivo jaw bone

Aim: The aim of this study was to determine the accuracy of volumetric analysis of extraction sockets using cone beam computed tomography (CBCT). Material and Methods: The volume of 40 dental alveoli in nine dry skull specimens (four mandibles and five maxillae) was determined by measuring the volume of the tooth socket impression using the water displacement technique. This was considered as the gold standard. Then, the tooth socket was scanned with CBCT and data were uploaded in the semi‐automated Livewire^® segmentation software. The software segments the tooth socket in consecutive 1 mm‐thick two‐dimensional slices. After segmentation, the total volume of the delineated socket was computed. The statistical difference between direct volumetric measurements and those obtained with CBCT imaging was assessed using the Student paired t‐test. Result: The mean socket volume of the skull specimens was 227±91 mm³ when obtained by direct measurement and 225±90 mm³ when obtained by CBCT imaging. Student paired t‐test showed no significant differences between both volume measurements (p>0.1). Conclusions: CBCT permits imaging of anatomical structures in three planes and allows for reliable volume estimates. The results should be verified in clinical circumstances and might have potential applicability for evaluation of extraction socket healing under different conditions.     

Platelet‐rich fibrin membranes as scaffolds for periosteal tissue engineering

Objectives: Platelet‐rich fibrin (PRF)‐based membranes have been used for covering alveolar ridge augmentation side in several in vivo studies. Few in vitro studies on PRF and no studies using human periosteal cells for tissue engineering have been published. The aim is a comparison of PRF with the commonly used collagen membrane Bio‐Gide^® as scaffolds for periosteal tissue engineering. Material and methods: Human periosteal cells were seeded on membrane pieces (collagen [Bio‐Gide^®] and PRF) at a density of 10⁴ cells/well. Cell vitality was assessed by fluorescein diacetate (FDA) and propidium iodide (PI) staining, biocompatibility with the lactate dehydrogenase (LDH) test and proliferation level with the MTT, WST and BrdU tests and scanning electron microscopy (SEM). Results: PRF membranes showed slightly inferior biocompatibility, as shown by the LDH test. The metabolic activity measured by the MTT and WST tests was higher for PRF than for collagen (BioGide^®). The proliferation level as measured by the BrdU test (quantitative) and SEM examinations (qualitative) revealed higher values for PRF. Conclusion: PRF appears to be superior to collagen (Bio‐Gide^®) as a scaffold for human periosteal cell proliferation. PRF membranes are suitable for in vitro cultivation of periosteal cells for bone tissue engineering. To cite this article:
Gassling V, Douglas T, Warnke, PH, Açil Y, Wiltfang J, Becker ST. Platelet‐rich fibrin membranes as scaffolds for periosteal tissue engineering.
Clin. Oral Impl. Res. 21 , 2010; 543–549.
doi: 10.1111/j.1600‐0501.2009.01900.x