Chitosan nanoparticles for plasmid DNA delivery: effect of chitosan molecular structure on formulation and release characteristics

Chitosan can be useful as a nonviral vector for gene delivery. Although there are several reports to form chitosan-pDNA particles, the optimization and effect on transfection remain insufficient. The chitosan-pDNA nanoparticles were formulated using complex coacervation and solvent evaporation techniques. The important parameters for the encapsulation efficiency were investigated, including molecular weight and deacetylation degree of chitosan. We found that encapsulation efficiency of pDNA is directly proportional with deacetylation degree, but there is an inverse proportion with molecular weight of chitosan. DNA-nanoparticles in the size range of 450-820 nm depend on the formulation process. The surface charge of the nanoparticles prepared with complex coacervation method was slightly positive with a zeta potential of +9 to +18 mV; nevertheless, nanoparticles prepared with solvent evaporation method had a zeta potential approximately +30 mV. The pDNA-chitosan nanoparticles prepared by using high deacetylation degree chitosan having 92.7%, 98.0%, and 90.4% encapsulation efficiency protect the encapsulated pDNA from nuclease degradation as shown by electrophoretic mobility analysis. The release of pDNA from the formulation prepared by complex coacervation was completed in 24 hr whereas the formulation prepared by evaporation technique released pDNA in 96 hr, but these release profiles are not statistically significant compared with formulations with similar structure (p > .05). According to the results, we suggest nanoparticles have the potential to be used as a transfer vector in further studies.     

The role of protamine amount in the transfection performance of cationic SLN designed as a gene nanocarrier

Cationic solid lipid nanoparticles (SLN) have been recently proposed as non-viral vectors in systemic gene therapy. The aim of this study was to evaluate the effect of the protamine amount used as the transfection promoter in SLN-mediated gene delivery. Three protamine-SLN samples (Pro25, Pro100, and Pro200) prepared by adding increasing amounts of protamine were characterized for their size, zeta potential, and protamine loading level. The samples were evaluated for pDNA complexation ability by gel-electrophoresis analysis and for cytotoxicity and transfection efficiency by using different cell lines (COS-I, HepG2, and Na1300). The size of SLN was ~230?nm and only Pro200 showed few particle aggregates. Unlike the Pro25 sample with the lowest protamine loading level, the others SLN samples (Pro100 and Pro200) exhibited a good ability in complexing pDNA. A cell-line dependent cytotoxicity lower than that of the positive control PEI (polyethilenimmine) was observed for all the SLN. Among these, only Pro100, having an intermediate amount of protamine, appeared able to promote pDNA cell transfer, especially in a neuronal cell line (Na1300). In conclusion, the amount of protamine as the transfection promoter in SLN affects not only the gene delivery ability of SLN but also their capacity to transfer genes efficiently to specific cell types.     

Chitosan Nanoparticles for Plasmid DNA Delivery: Effect of Chitosan Molecular Structure on Formulation and Release Characteristics

Chitosan can be useful as a nonviral vector for gene delivery. Although there are several reports to form chitosan-pDNA particles, the optimization and effect on transfection remain insufficient. The chitosan-pDNA nanoparticles were formulated using complex coacervation and solvent evaporation techniques. The important parameters for the encapsulation efficiency were investigated, including molecular weight and deacetylation degree of chitosan. We found that encapsulation efficiency of pDNA is directly proportional with deacetylation degree, but there is an inverse proportion with molecular weight of chitosan. DNA-nanoparticles in the size range of 450–820 nm depend on the formulation process. The surface charge of the nanoparticles prepared with complex coacervation method was slightly positive with a zeta potential of +9 to +18 mV; nevertheless, nanoparticles prepared with solvent evaporation method had a zeta potential ～ +30 mV. The pDNA-chitosan nanoparticles prepared by using high deacetylation degree chitosan having 92.7%, 98.0%, and 90.4% encapsulation efficiency protect the encapsulated pDNA from nuclease degradation as shown by electrophoretic mobility analysis. The release of pDNA from the formulation prepared by complex coacervation was completed in 24 hr whereas the formulation prepared by evaporation tecnique released pDNA in 96 hr, but these release profiles are not statistically significant compared with formulations with similar structure p >. 05). According to the results, we suggest nanoparticles have the potential to be used as a transfer vector in further studies.     

Comparative study of poly (lactic-co-glycolic acid)-poly ethyleneimine-plasmid DNA microparticles prepared using double emulsion methods

Controlled release of plasmid DNA (pDNA) from biodegradable poly lactic-co-glycolic acid (PLGA) microparticles has the potential to enhance transgene expression. However, barriers to this approach include limited encapsulation efficiency, pDNA damage during fabrication and confinement of the microparticles inside phagolysosomal compartments. Combining PLGA with poly ethyleneimine (PEI) can improve protection of pDNA during fabrication, increase encapsulation efficiencies and impart the PLGA microparticles with the capacity to escape the phagolysosomal compartments. This study compares three promising formulation methods for preparing PLGA PEI pDNA microparticles and evaluates for buffering capacity, cellular uptake, transfection efficiency and toxicity. In the first method, PLGA PEI pDNA microparticles are prepared by entrapping pDNA in blended PLGA/PEI using the double emulsion water-in-oil-in-water solvent evaporation technique (PA). In a second approach, PEI-pDNA polyplexes are prepared and then entrapped in PLGA microparticles using a double emulsion solvent evaporation method (PB). Microparticles prepared using formulation methods PA and PB are then compared against PLGA microparticles with PEI conjugated to the surface using carbodiimide chemistry (PC); 0.5% PVA is identified as the optimum concentration of surfactant for generating the strongest transfection efficiencies. N:P ratios of 5 and 10 are selected for preparation of each group. Gel electrophoresis demonstrates that all PLGA microparticle formulations have strong pDNA binding capacity. An MTT assay shows that in vitro cytotoxicity of PLGA PEI microparticles is significantly lower than PEI alone. PLGA PEI pDNA microparticles mediate higher cellular uptake efficiency and consequently higher transgene expression than unmodified PLGA microparticles in COS7 and HEK293 cells. Preparing PEI-pDNA polyplexes prior to entrapment in PLGA microparticles (PB) results in the highest pDNA loading. This is 2.5-fold higher than pDNA loading in unmodified PLGA microparticles. PLGA PEI pDNA microparticles prepared using method PB generates the strongest transfection efficiencies, which are 500-fold higher than unmodified PLGA pDNA microparticles in HEK293 cells and 1800-fold higher in COS-7 cells. The highest transfection efficiencies generated from microparticles prepared using method PB is achieved using an N:P ratio of 5.     

Tris(2-aminoethyl)amine-based α-branched fatty acid amides – Synthesis of lipids and comparative study of transfection efficiency of their lipid formulations

The synthesis of a new class of cationic lipids, tris(2-aminoethyl)amine-based α-branched fatty acid amides, is described resulting in a series of lipids with specific variations in the lipophilic as well as the hydrophilic part of the lipids. In-vitro structure/transfection relationships were established by application of complexes of these lipids with plasmid DNA (pDNA) to different cell lines. The α-branched fatty acid amide bearing two tetradecyl chains and two lysine molecules (T14diLys) in mixture with the co-lipid 1,2-di-[(9Z)-octadec-9-enoyl]-sn-glycero-3-phosphoethanolamine (DOPE) (1/2, n/n) exhibits effective pDNA transfer in three different cell lines, namely Hep-G2, A549, and COS-7. The presence of 10% serum during lipoplex incubation of the cells did not affect the transfection efficiency. Based on that, detailed investigations of the complexation of pDNA with the lipid formulation T14diLys/DOPE 1/2 (n/n) were carried out with respect to particle size and charge using dynamic light scattering (DLS), ζ-potential measurements, and transmission electron microscopy (TEM). Additionally, the lipoplex uptake was investigated by confocal laser scanning microscopy (CLSM). Overall, lipoplexes prepared from T14diLys/DOPE 1/2 (n/n) offer large potential as lipid-based polynucleotide carriers and further justify advanced examinations.     

Preparation, characterization, cytotoxicity and transfection efficiency of poly(DL-lactide-co-glycolide) and poly(DL-lactic acid) cationic nanoparticles for controlled delivery of plasmid DNA

The objective of this study was to investigate the effect of formulation parameters (i.e. polymer molecular weight and homogenization speed) on various physicochemical and biological properties of cationic nanoparticles. Cationic nanoparticles were prepared using different molecular weights of poly(DL-lactide-co-glycolide) (PLGA) and poly(DL-lactic acid) (PLA) by double emulsion solvent evaporation at two different homogenization speeds, and were characterized in terms of size, surface charge, morphology, loading efficiency, plasmid release, plasmid integrity, cytotoxicity, and transfection efficiency. Cationic surfactant, cetyltrimethylammonium bromide (CTAB), was used to provide positive charge on the surface of nanoparticles. Reporter plasmid gWIZ Beta-gal was loaded on the surface of nanoparticles by incubation. Use of higher homogenization speed and lower molecular weight polymer led to a decrease in mean particle size, increase in zeta potential, increase in plasmid loading efficiency, and a decrease in burst release. The nanoparticles displayed good morphology as evident from scanning electron micrographs. In vitro cytotoxicity study by MTT assay showed a low toxicity. Structural integrity of the pDNA released from nanoparticles was maintained. Transfecting human embryonic kidney (HEK293) cells with nanoparticles prepared from low molecular weight PLGA and PLA resulted in an increased expression of beta-galactosidase as compared to those prepared from high molecular weight polymer. Our results demonstrate that the PLGA and PLA cationic nanoparticles can be used to achieve prolonged release of pDNA, and the plasmid release rate and transfection efficiency are dependent on the formulation variables.     

Receptor-mediated gene delivery by folate-poly(ethylene glycol)-grafted-trimethyl chitosan in vitro

Folate-poly(ethylene glycol)-grafted-trimethyl chitosan (F-PEG-g-TMC) and methoxypolyethylene glycol-grafted-trimethyl chitosan (mPEG-g-TMC)/pDNA complexes were prepared and characterized concerning physicochemical properties including cytotoxicity, condensation efficiency, particle size, and zeta potential. Furthermore, cellular uptake and transfection efficiency of the complexes were evaluated in vitro and compared with that of folate-trimethyl chitosan (folate-TMC) synthesized by our group to elucidate the effect of PEGylation. The cellular uptake of the F-PEG-g-TMC/pDNA with a copolymer nitrogen-to-DNA phosphate ratio (N/P ratio) of 20 in KB cells was specifically increased up to 1.68-fold compared with that of the mPEG-g-TMC/pDNA (N/P ratio 20) resulting in 1.5-fold and 1.4-fold increased transfection efficiency in KB cells and SKOV3 cells (folate receptor-overexpressing cell lines), respectively. The intracellular uptake and transfection efficiency of the F-PEG-g-TMC/pDNA were significantly enhanced relative to the folate-TMC/pDNA in folate receptor-overexpressing cells due to stabilizing effect of PEGylation. Subcellular localization of the complexes in the process of intracellular transportation was observed by confocal laser scanning microscopy suggesting quicker association of the F-PEG-g-TMC/pDNA. In conclusion, the F-PEG-g-TMC/pDNA complexes are potential vehicles for improving the transfection efficiency and specificity of gene.     

香叶木素固体脂质纳米粒的制备及质量评价

目的 制备香叶木素固体脂质纳米粒并对其进行质量评价。方法 采用溶剂注入法制备香叶木素固体脂质纳米粒,用 Box-Benhnken效应面法优化处方,并通过包封率、微观形态、粒径分布和Zeta电位对香叶木素固体脂质纳米粒的质量进行评价。 结果 香叶木素固体脂质纳米粒最优处方组成：表面活性剂浓度3.39%,棕榈酸浓度0.116%,脂药质比为21:100,制备的香叶木素 固体脂质纳米粒外观澄清透明,带淡蓝色乳光;平均粒径为(91.73±3.18)nm(n=3),PDI为0.228,电位为(-11.46±0.74)mV(n=3);包 封率为95.13%,载药量为9.04%;透射电镜照片显示纳米粒大小均一,呈球形或类球形。 结论 该处方可用于香叶木素固体脂 质纳米粒的制备,工艺简单,稳定可行。     

Aerosolization of lipoplexes using AERx Pulmonary Delivery System

The lung represents an attractive target for delivering gene therapy to achieve local and potentially systemic delivery of gene products. The objective of this study was to evaluate the feasibility of the AERx Pulmonary Delivery System for delivering nonviral gene therapy formulations to the lung. We found that "naked" DNA undergoes degradation following aerosolization through the AERx nozzle system. However, DNA formulated with a molar excess of cationic lipids (lipoplexes) showed no loss of integrity. In addition, the lipoplexes showed no significant change in particle size, zeta (zeta) potential, or degree of complexation following extrusion. The data suggest that complexation with cationic lipids had a protective effect on the formulation following extrusion. In addition, there was no significant change in the potency of the formulation as determined by a transfection study in A-549 cells in culture. We also found that DNA formulations prepared in lactose were aerosolized poorly. Significant improvements in aerosolization efficiency were seen when electrolytes such as NaCl were added to the formulation. In conclusion, the data suggest that delivery of lipoplexes using the AERx Pulmonary Delivery System may be a viable approach for pulmonary gene therapy.     

壳聚糖纳米粒作为基因载体的研究:粒径对转染效率的影响

研究粒径对壳聚糖(chitosan，CS)纳米粒介导的转染效率的影响。通过调整CS溶液加入质粒基因(plasmid DNA，pDNA)溶液的速度和涡旋时间制备250，580和1 300 nm粒径pDNA/CS纳米粒，研究粒径对CS介导的细胞转染效率的影响。为深入探讨粒径对转染效率的影响，考察了3种粒径pDNA/CS纳米粒的药剂学性质，对抗核酸酶作用和细胞对纳米粒的吸附和摄取行为。结果表明：本文制备的3种粒径纳米粒的药剂学性质和凝聚pDNA的能力等特性基本无差别，均能有效保护pDNA免受核酸酶降解；在HEK293细胞中的转染效率无显著差异；与细胞共孵育4 h，流式细胞仪测定的三者细胞摄取率与摄取量相似；荧光显微图像显示3种粒径纳米粒均以小聚集体形式吸附于细胞表面，激光扫描共聚焦显微图像显示直径约为2 μm小聚集体较易被细胞内吞入胞。因此粒径在250～1 300 nm中对壳聚糖纳米粒介导的细胞转染率基本无影响。     

New liposomal doxorubicin nanoformulation for osteosarcoma: Drug release kinetic study based on thermo and pH sensitivity

A novel approach was developed for the preparation of stealth controlled‐release liposomal doxorubicin. Various liposomal formulations were prepared by employing both thin film and pH gradient hydration techniques. The optimum formulation contained phospholipid and cholesterol in 1:0.43 molar ratios in the presence of 3% DSPE ‐mPEG (2000). The liposomal formulation was evaluated by determining mean size of vesicle, encapsulation efficiency, polydispersity index, zeta potentials, carrier's functionalization, and surface morphology. The vesicle size, encapsulation efficiency, polydispersity index, and zeta potentials of purposed formula were 93.61 nm, 82.8%, 0.14, and ?23, respectively. Vesicles were round‐shaped and smooth‐surfaced entities with sharp boundaries. In addition, two colorimetric methods for cytotoxicity assay were compared and the IC ₅₀ (the half maximal inhibitory concentration) of both methods for encapsulated doxorubicin was determined to be 0.1 μg/ml. The results of kinetic drug release were investigated at several different temperatures and pH levels, which showed that purposed formulation was thermo and pH sensitive.     

In vitro characterization and transfection of IL-2 gene complexes

BACKGROUND: Interleukin-2 used in the treatment of malignant tumors has an anti-tumor efficacy. In this study, we have studied in vitro characterization and transfection efficiency of a plasmid encoding hIL-2, pCXWN-hIL-2, complexed to chitosan, polyethylenimine or DOTAP with varying ratios. METHODS: Plasmid DNA was amplified in Escherichia coli DH5alpha and isolated by alkali lysis method. The pDNA/chitosan, pDNA/PEI or pDNA/DOTAP complexes were analyzed by agarose gel electrophoresis for complex formation and by ESEM image analysis system for the morphology and DNA/medium relationship of complexes. DNase stability, the particle size and zeta potential values of complexes were determined. Transfection efficiencies of resulting complexes in two different cell lines were assayed by ELISA method. RESULTS: Conclusively, a transfection activity was observed in both cell lines (HeLa and Swiss3T3) with the order of pDNA/DOTAP>pDNA/PEI>pDNA/chitosan complexes. We have observed that the transfection efficiency was higher in HeLa cell line compared to Swiss3T3 cell line. CONCLUSION: The physicochemical studies like stability, particle size and zeta potential, showed a relationship between the properties of a complex and its transfection efficiency.     

阴离子脂质体－阳离子脂质体复合物介导的基因转染

目的评价阴离子脂质体-阳离子脂质体复合物介导质粒转移至HepG2肝癌细胞中及其毒副作用。方法制备携载表达绿色荧光蛋白质粒的阳离子脂质体,与阴离子脂质体形成复合物。测定脂质体复合物的zeta电位,凝胶阻滞实验考察质粒包封情况,流式细胞仪测量各阴离子脂质体-阳离子脂质体复合物的转染效率,MTT法检测细胞毒性。结果复合物能完全包裹质粒,其zeta电位低于阳离子脂质体zeta电位;脂质体复合物介导的转染效率略低于阳离子脂质体,其细胞生存率高于阳离子脂质体。结论阴离子脂质体-阳离子脂质体复合物在降低细胞毒性的同时,可实现对HepG2细胞较高的转染效率。     

Development and characterization of a new plasmid delivery system based on chitosan-sodium deoxycholate nanoparticles

Chitosan is one of the most promising polymers for drug delivery through the mucosal routes because of its polycationic, biocompatible, and biodegradable nature, and particularly due to its mucoadhesive and permeation-enhancing properties. Bile salts are known to interact with lipid membranes, increasing their permeability. The addition of bile salts to chitosan matrices may improve the delivery characteristics of the system, making it suitable for mucosal administration of bioactive substances. In the present study we have developed chitosan nanoparticles using sodium deoxycholate as a counter ion and evaluated their potential as gene delivery carriers. Chitosan-sodium deoxycholate nanoparticles (CS/DS) obtained via a mild ionic gelation procedure using different weight ratios were used to encapsulate plasmid DNA (pDNA) expressing a "humanized" secreted Gaussia Luciferase as reporter gene (pGLuc, 5.7 kDa). Mean particle size, polydispersity index and zeta potential were evaluated in order to select the best formulation for further in vitro studies. The nanoparticles presented an average size of 153-403 nm and a positive zeta potential ranging from +33.0 to +56.9 mV, for nanoparticles produced with CS/DS ratios from 1:4 to 1:0.6 (w:w), respectively. The pDNA was efficiently encapsulated and AFM studies showed that pDNA-loaded nanoparticles presented a more irregular surface due to the interaction between cationic chitosan and negatively charged pDNA which results in a more compact structure when compared to empty nanoparticles. Transfection efficiency of CS/DS-pDNA nanoparticles into moderately (AGS) and well differentiated (N87) gastric adenocarcinoma cell lines was determined by measuring the expression of luciferase, while cell viability was assessed using the MTT reduction. The CS/DS nanoparticles containing encapsulated pDNA were able to transfect both AGS and N87 cell lines, being more effective with AGS cells, the less differentiated cell line. The highest enzymatic activity was achieved with 20% pDNA encapsulated and after 24 h of transfection time. Low cytotoxicity was observed for the CS/DS nanoparticles either with or without pDNA, suggesting this could be a new potential vehicle for mucosal delivery of pDNA.     

Preparation and characterization of solid lipid nanoparticles loaded with total flavones of Hippophae rhamnoides (TFH)

Solid lipid nanoparticles (SLNs) containing total flavones of Hippophae rhamnoides (TFH) were prepared by high-pressure homogenization (HPH), by both hot HPH and cold HPH. The influence of process parameters (lipid matrix, lipid concentration, carbohydrate type and its concentration) on the SLN size distribution, zeta potential, entrapment efficiency, crystal form, and in vitro release profile was investigated. The highest entrapment efficiency for TFH, at around 93%, was found for SLNs composed of TFH/Compritol 888 ATO in a 1:30 molar ratio and made by cold HPH. The advantages of TFH SLNs are the improved oral bioavailability of TFH and the prolonged mean retention time and drug release time.     

Aerosolization of lipoplexes using AERx® pulmonary delivery system

The lung represents an attractive target for delivering gene therapy to achieve local and potentially systemic delivery of gene products. The objective of this study was to evaluate the feasibility of the AERx Pulmonary Delivery System for delivering nonviral gene therapy formulations to the lung. We found that “naked” DNA undergoes degradation following aerosolization through the AERx nozzle system. However, DNA formulated with a molar excess of cationic lipids (lipoplexes) showed no loss of integrity. In addition, the lipoplexes showed no significant change in particle size, zeta (ζ) potential, or degree of complexation following extrusion. The data suggest that complexation with cationic lipids had a protective effect on the formulation following extrusion. In addition, there was no significant change in the potency of the formulation as determined by a transfection study in A-549 cells in culture. We also found that DNA formulations prepared in lactose were aerosolized poorly. Significant improvements in aerosolization efficiency were seen when electrolytes such as NaCl were added to the formulation. In conclusion, the data suggest that delivery of lipoplexes using the AERx Pulmonary Delivery System may be a viable approach for pulmonary gene therapy.     

Cationic lipid structure and formulation considerations for optimal gene transfection of the lung

Enhanced gene transduction to the lung using cationic lipids could be attained through optimization of the structure of the lipids and the formulation of the cationic lipid:plasmid DNA (pDNA) complexes. We have expanded on our earlier observation of the importance of the structural orientation of the cationic lipid headgroup. Through the synthesis of a number of matched pairs of cationic lipids differing only in the configuration of their headgroup, we confirmed that those harboring a T-shape headgroup are more active than their linear counterparts, at least when tested in the lungs of BALB/c mice. Additionally, we demonstrated that not only are the structural considerations of these cationic lipids important, but also their protonation state, the free base being invariably more active than its salt counterpart. The salt forms of cationic lipids bound pDNA with greater avidity, which may have affected their subsequent intracellular dissolution and transit of the pDNA to the nucleus. Inclusion of a number of frequently used solutes in the vehicle severely inhibited the gene transfection activity of the cationic lipids. The selection of neutral co-lipids was also an important factor for overall transfection activity of the formulation, with significant gains in transfection activity realized when diphytanoylphosphatidylethanolamine or dilinoleoylphosphatidylethanolamine were used in lieu of dioleoylphosphatidylethanolamine. Finally, we showed that a transacylation reaction could occur between the cationic lipid and neutral co-lipid which reduced the transfection activity of the complexes. It is the hope that as our understanding of the many factors that influence the activity of these cationic lipid:pDNA complexes improves, formulations with much greater potency can be realized for use in the treatment of pulmonary diseases.     

Cationic Lipid Structure and Formulation Considerations for Optimal Gene Transfection of the Lung

Abstract

Enhanced gene transduction to the lung using cationic lipids could be attained through optimization of the structure of the lipids and the formulation of the cationic lipid : plasmid DN A (pDNA) complexes. We have expanded on our earlier observation of the importance of the structural orientation of the cationic lipid headgroup. Through the synthesis of a number of matched pairs of cationic lipids differing only in the configuration of their headgroup, we confirmed that those harboring a T-shape headgroup are more active than their linear counterparts, at least when tested in the lungs of BALB/c mice. Additionally, we demonstrated that not only are the structural considerations of these cationic lipids important, but also their protonation state, the free base being invariably more active than its salt counterpart. The salt forms of cationic lipids bound pDNA with greater avidity, which may have affected their subsequent intracellular dissolution and transit of the pDNA to the nucleus. Inclusion of a number of frequently used solutes in the vehicle severely inhibited the gene transfection activity of the cationic lipids. The selection of neutral co-lipids was also an important factor for overall transfection activity of the formulation, with significant gains in transfection activity realized when diphytanoylphosphatidylethanol-amine or dilinoleoylphosphatidylethanolamine were used in lieu of dioleoylphosphati-dylethanolamine. Finally, we showed that a transacylation reaction could occur between the cationic lipid and neutral co-lipid which reduced the transfection activity of the complexes. It is the hope that as our understanding of the many factors that influence the activity of these cationic lipid: pDNA complexes improves, formulations with much greater potency can be realized for use in the treatment of pulmonary diseases.     

Anionic liposomal delivery system for DNA transfection

The present study investigates the use of novel anionic lipoplexes composed of physiological components for plasmid DNA delivery into mammalian cells in vitro. Liposomes were prepared from mixtures of endogenously occurring anionic and zwitterionic lipids, 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DOPG) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), respectively, at a molar ratio of 17:83 (DOPG:DOPE). Anionic lipoplexes were formed by complexation between anionic liposomes and plasmid DNA molecules encoding green fluorescence protein (GFP) using Ca2+ ions. Transfection and toxicity were evaluated in CHO-K1 cells using flow cytometry and propidium iodide staining, respectively. Controls included Ca2+-DNA complexes (without lipids), anionic liposomes (no Ca2+), and a cationic liposomal formulation. Efficient delivery of plasmid DNA and subsequent GFP expression was achieved using anionic lipoplexes. Transfection efficiency increased with Ca2+ concentration up to 14 mM Ca2+, where transfection efficiency was 7-fold higher than in untreated cells, with minimum toxicity. Further increase in Ca2+ decreased transfection. Transfection efficiency of anionic lipoplexes was similar to that of cationic liposomes (lipofectAmine), whereas their toxicity was significantly lower. Ca2+-DNA complexes exhibited minimal and irregular transfection with relatively high cytotoxicity. A model was developed to explain the basis of anionic lipoplex uptake and transfection efficacy. Effective transfection is explained on the formation of nonbilayer hexagonal lipid phases. Efficient and relatively safe DNA transfection using anionic lipoplexes makes them an appealing alternative to be explored for gene delivery.     

壳聚糖纳米粒用作基因递送载体的初步研究

目的初步研究基因壳聚糖纳米粒的性质和转染活性。方法用复凝聚法制备纳米粒;用透射电镜观察形态;用纳米粒度分析仪测定粒径、多分散度和zeta电位;用荧光分光光度法测定基因包封率;用凝胶阻滞分析和荧光扫描测定基因在纳米粒中的位置;用体外基因转染实验定性评价纳米粒的转染活性。结果纳米粒形态多呈球形,平均粒径为218.9 nm,多分散度为0.276,zeta电位为+21.2 mV;基因包封率为99.6%;凝胶阻滞分析和荧光扫描表明基因几乎全部被包裹在纳米粒内部,表面吸附很少;体外基因转染实验表明基因壳聚糖纳米粒能够转染人胚胎肾细胞(HEK293)和肝癌细胞(HepG2),基因能够在这两种细胞中表达。结论壳聚糖纳米粒能将基因递送到细胞内并且基因能够表达,因此可以用作基因药物载体。