Injectable and biodegradable poly(organophosphazene) hydrogel as a delivery system of docetaxel for cancer treatment

Abstract

Although docetaxel (DTX) is an advanced taxoid, further augmentation of its properties is still required, such as improvement in its low aqueous solubility. Herein, we report the development of biodegradable/injectable poly(organophosphazene) (PPZ) hydrogels for the delivery of DTX without the use of organic solvents. An aqueous solution of PPZ containing α-amino-ω-methoxy-poly(ethylene glycol) (AMPEG) 750 instead of AMPEG 550 was prepared, thereby increasing the erosion capacity of the hydrogel by judicious balance of the hydrophobic/hydrophilic moieties. The safety of the hydrogel was demonstrated using a biocompatibility test. The PPZ aqueous solution (8?wt%) containing DTX exhibited a thermosensitive sol–gel–sol transition that was independent of the concentration of DTX (1–3?mg/mL). The in vitro release study indicated that the dominant release mechanism was either erosion or diffusion/erosion-controlled release depending on the DTX content of the hydrogel. The in vivo anticancer effect of the intratumorally injected PPZ system in human gastric cancer cell-xenografted mice was evaluated, which demonstrated a significantly (p?<?0.01) enhanced effect of the DTX-PPZ hydrogel system compared to the control (DTX solution, i.v.). In conclusion, the PPZ hydrogel may be a promising candidate for DTX delivery, affecting a decrease in the size of tumors with little toxicity prior to exeresis.     

Silk fibroin biomaterials for controlled release drug delivery

Introduction: Given the benefits of polymer drug delivery implants over traditional periodic systemic administration, the development of biomaterial systems with the necessary properties (biocompatibility, degradation, stabilization, controllability) is paramount. Silk fibroin represents a promising, naturally derived polymer for local, controlled, sustained drug release from fully degrading implants and the polymer can be processed into a broad array of material formats.

Areas covered: This review provides an overview of silk biomaterials for drug delivery, especially those that can function as long-term depots. Fundamentals of structure and assembly, processing options, control points and specific examples of implantable silk drug delivery systems (sponges, films) and injectable systems (microspheres, hydrogels) from the 1990s and onwards are reviewed.

Expert opinion: Owing to its unique material properties, stabilization effects and tight controllability, silk fibroin is a promising biomaterial for implantable and injectable drug delivery applications. Many promising control points have been identified, and characterization of the relationships between silk processing and/or material properties and the resulting drug loading and release kinetics will ultimately enhance the overall utility of this unique biomaterial. The ever-expanding biomaterial ‘tool kit’ that silk provides will eventually allow the simultaneous optimization of implant structure, material properties and drug release behavior that is needed to maximize the cost-efficiency, convenience, efficacy and safety of many new and existing therapeutics, especially those that cannot be delivered by means of traditional administration approaches.     

Thermosensitive hydrogels for drug delivery

Introduction: Controlled drug delivery has been widely applied in areas such as cancer therapy and tissue regeneration. Thermosensitive hydrogel-based drug delivery systems have increasingly attracted the attention of the drug delivery community, as the drugs can be readily encapsulated and released by the hydrogels.

Areas covered: Thermosensitive hydrogels that can serve as drug carriers are discussed in this paper. Strategies used to control hydrogel properties, in order to tailor drug release kinetics, are also reviewed. This paper also introduces applications of the thermosensitive hydrogel-based drug delivery systems in cancer therapy and tissue regeneration.

Expert opinion: When designing a drug delivery system using thermosensitive hydrogels, one needs to consider what type of thermosensitive hydrogel needs to be used, and how to manipulate its properties to meet the desired drug release kinetics. For material selection, both naturally derived and synthetic thermosensitive polymers can be used. Various methods can be used to tailor thermosensitive hydrogel properties in order to achieve the desired drug release profile.     

Light-responsive in situ forming injectable implants for effective drug delivery to the posterior segment of the eye

ABSTRACT

Introduction: Frequent intravitreal injections are currently the preferred treatment method for diseases affecting the posterior segment of the eye. However, these repeated injections have been associated with pain, risk of infection, hemorrhages, retinal detachment and high treatment costs. To overcome these limitations, light-responsive in situ forming injectable implants (ISFIs) may emerge as novel systems providing site-specific controlled drug delivery to the retinal tissues with great accuracy, safety, minimal invasiveness and high cost efficiency.

Area covered: Complex ocular barriers, routes for drug delivery, types of injectable implants, ocular application of light and benefits of light-responsive systems are discussed with regards to challenges and strategies employed for effective drug delivery to the posterior segment of the eye. In particular, we have highlighted photoresponsive moieties, photopolymerization mechanisms and different development strategies with their limitations as well as recent advancements in the field.

Expert opinion: Biodegradable light-responsive ISFIs are promising drug delivery systems that have shown a high degree of biocompatibility with sustained drug release in a number of applications. However, their use in intravitreal drug delivery is still in the very early stages. Issues related to the biocompatibility of the photoinitiator and the elimination of photo-degraded by-products from the ocular tissues need careful consideration, not only from a chemistry standpoint, but also from a biological perspective to improve the suitability of these systems for clinical applications.     

Hydrogels for lentiviral gene delivery

Introduction: Gene delivery from hydrogel biomaterials provides a fundamental tool for a variety of clinical applications including regenerative medicine, gene therapy for inherited disorders and drug delivery. The high water content and mild gelation conditions of hydrogels support their use for gene delivery by preserving activity of lentiviral vectors and acting to shield vectors from any host immune response.

Areas covered: Strategies to control lentiviral entrapment within and retention/release from hydrogels are reviewed. The authors discuss the ability of hydrogel design parameters to control the transgene expression profile and the capacity of hydrogels to protect vectors from (and even modulate) the host immune response.

Expert opinion: Delivery of genetic vectors from scaffolds provides a unique opportunity to capitalize on the potential synergy between the biomaterial design for cell processes and gene delivery. Hydrogel properties can be tuned to directly control the events that determine the tissue response to controlled gene delivery, which include the extent of cell infiltration, preservation of vector activity and vector retention. While some design parameters have been identified, numerous opportunities for investigation are available in order to develop a complete model relating the biomaterial properties and host response to gene delivery.     

Exploring the potential of minoxidil tretinoin liposomal based hydrogel for topical delivery in the treatment of androgenic alopecia

Abstract

Purpose: Androgenic alopecia (AGA) is a condition of progressive hair loss and involves follicular miniaturization triggered mainly due to varying levels of androgen besides environmental and genetic factors, which may also play some role. Minoxidil (MXD) has been considered as most effective therapeutic moiety to treat this disorder. Another drug Tretinoin (TRET) is known for its comedolytic activity and is reported to enhance percutaneous absorption of MXD. Presently both these drugs are being utilized for treatment of androgenic alopecia (AGA) in solution form which poses several problems in terms of poor solubility of drug, frequency of application and side effects.

Materials and methods: Current work investigates liposomal hydrogel system for simultaneous delivery of MXD and TRET to overcome the limitations of existing formulation. Successful development of liposomes was commenced by thin film hydration method and various parameters affecting desired characteristics like size, morphology, entrapment efficiency; stability and ex vivo permeation were optimized. The formulated liposomes were further characterized for various physicochemical properties and evaluated for in vivo irritancy study in animals.

Results and discussion: Results suggested prepared liposomes to be stable, homogenous and capable to hold both the drugs within. Association with hydrogel enhanced the permeation of MXD through skin ex vivo but TRET retained on the skin. Liposome loaded hydrogel was found to be non-irritant to skin.

Conclusion: Overall developed system showed potential for effective and simultaneous delivery of both the drugs.     

Hydrogels with smart systems for delivery of hydrophobic drugs

Introduction: Smart hydrogel systems present opportunities to not only provide hydrophobic molecule encapsulation capability but to also respond to specific delivery routes.

Areas covered: An overview of the design principles, preparation methods and applications of hydrogel systems for delivery of hydrophobic drugs is given. It begins with a summary of the advantages of hydrogels as delivery vehicles over other approaches, particularly macromolecular nanocarriers, before proceeding to address the design and preparation strategies and chemistry involved, with a particular focus on the introduction of hydrophobic domains into (naturally) hydrophilic hydrogels. Finally, the applications in different delivery routes are discussed.

Expert opinion: Modifications to conventional hydrogels can endow them with the capability to carry hydrophobic drugs but other functions as well, such as the improved mechanical stability, which is important for long-term in vivo residence and/or self-healing properties useful for injectable delivery pathways. These modifications harness hydrophobic-hydrophobic forces, physical interactions and inclusion complexes. The lack of in-depth understanding of these interactions, currently limits more delicate and application-oriented designs. Increased efforts are needed in (i) understanding the interplay of gel formation and simultaneous drug loading; (ii) improving hydrogel systems with respect to their biosafety; and (iii) control over release mechanism and profile.     

Silk-elastin-like protein biomaterials for the controlled delivery of therapeutics

Introduction: Genetically engineered biomaterials are useful for controlled delivery owing to their rational design, tunable structure–function, biocompatibility, degradability and target specificity. Silk-elastin-like proteins (SELPs), a family of genetically engineered recombinant protein polymers, possess these properties. Additionally, given the benefits of combining semi-crystalline silk-blocks and elastomeric elastin-blocks, SELPs possess multi-stimuli-responsive properties and tunability, thereby becoming promising candidates for targeted cancer therapeutics delivery and controlled gene release.

Areas covered: An overview of SELP biomaterials for drug delivery and gene release is provided. Biosynthetic strategies used for SELP production, fundamental physicochemical properties and self-assembly mechanisms are discussed. The review focuses on sequence–structure–function relationships, stimuli-responsive features and current and potential drug delivery applications.

Expert opinion: The tunable material properties allow SELPs to be pursued as promising biomaterials for nanocarriers and injectable drug release systems. Current applications of SELPs have focused on thermally-triggered biomaterial formats for the delivery of therapeutics, based on local hyperthermia in tumors or infections. Other prominent controlled release applications of SELPs as injectable hydrogels for gene release have also been pursued. Further biomedical applications that utilize other stimuli to trigger the reversible material responses of SELPs for targeted delivery, including pH, ionic strength, redox, enzymatic stimuli and electric field, are in progress. Exploiting these additional stimuli-responsive features will provide a broader range of functional biomaterials for controlled therapeutics release and tissue regeneration.     

Injectable poly(organophosphazene) hydrogel system for effective paclitaxel and doxorubicin combination therapy

Abstract

Combination therapy is an important option for gastric cancer which is the second leading cause of cancer-related death worldwide. The administration schedule of cell cycle-specific drugs, such as doxorubicin (DOX) and paclitaxel (PTX), is important for therapeutic efficacy. However, to control the schedule is clinically inconvenient. Additionally, in vitro cytotoxicity tests against human gastric cancer cells (SNU-601) showed that the combination indices (CIs) of DOX and PTX were 1.43 (α?=?0) and 1.90 (α?=?1), respectively, indicating that the DOX and PTX interaction was antagonistic. Thus, based on the finding that the release rate of drugs from poly(organophosphazene) (PPZ) hydrogel is dependent on the hydrophobicity of the drugs, we used injectable PPZ hydrogel in combination therapy. In vivo anticancer activity test in human gastric cancer cell-xenografted mice showed that intratumoral injection with aqueous PPZ solution, containing DOX (15?mg/kg) and PTX (30?mg/kg), resulted in the highest tumor inhibition and safety (no mortality for approximately 3 months) in the experimental groups. Consequently, PPZ hydrogel is expected to be a promising drug delivery system for cell cycle-specific drugs, facilitating the control of their administration schedule for effective combination therapy.     

How controlled release technology can aid gene delivery

Introduction: Many types of gene delivery systems have been developed to enhance the level of gene expression. Controlled release technology is a feasible gene delivery system which enables genes to extend the expression duration by maintaining and releasing them at the injection site in a controlled manner. This technology can reduce the adverse effects by the bolus dose administration and avoid the repeated administration. Biodegradable biomaterials are useful as materials for the controlled release-based gene delivery technology and various biodegradable biomaterials have been developed.

Areas covered: Controlled release-based gene delivery plays a critical role in a conventional gene therapy and genetic engineering. In the gene therapy, the therapeutic gene is released from biodegradable biomaterial matrices around the tissue to be treated. On the other hand, the intracellular controlled release of gene from the sub-micro-sized matrices is required for genetic engineering. Genetic engineering is feasible for cell transplantation as well as research of stem cells biology and medicine.

Expert opinion: DNA hydrogel containing a sequence of therapeutic gene and the exosome including the individual specific nucleic acids may become candidates for controlled release carriers. Technologies to deliver genes to cell aggregates will play an important role in the promotion of regenerative research and therapy.     

Preclinical development of TLR ligands as drugs for the treatment of chronic viral infections

Introduction: Toll-like receptors (TLRs) have been identified as key regulators of innate and adaptive immune responses in viral infection. Recent progress in this field revealed that there are significant interactions between the TLR system and pathogens in chronic viral infections. Therefore, TLR ligands have great potential for the treatment of chronic viral infections.

Areas covered: This review provides an overview of the methodology for preclinical testing of TLR ligands for three major viral infections: hepatitis B virus (HBV), hepatitis C virus (HCV) and human immunodeficiency virus (HIV). TLR ligands have shown potent antiviral activity in different cell culture systems as well as animal models for these infections and induce the production of antiviral cytokines, modulated cellular immunological functions and antiviral effects in vivo.

Expert opinion: The recent progress in this field demonstrated that activation of a large number of TLR ligands is effective against viral infections in cell culture systems and animal models. Exploring these models, further in-depth elucidation of the molecular and immunological mechanisms of the antiviral activity of TLR ligands will be necessary to develop them into clinical useful drugs.     

Surface modified kokum butter lipid nanoparticles for the brain targeted delivery of nevirapine

Abstract

Aim: The present work investigates the efficacy of Polysorbate 80(P80) coated Kokum butter (KB) solid lipid nanoparticles (P80NvKLNs) for the brain targeted delivery of Nevirapine (Nv).

Methods: Solid lipid nanoparticles (SLNs) were prepared by nanoprecipitation technique and evaluated for drug excipient compatibility studies, z- average particle size (nm), zeta potential (mv), percentage drug entrapment efficiency (%EE), surface morphology and in-vitro drug release properties. The in-vivo biodistribution and brain targeting efficiency of nanoparticles were studied in healthy male Wistar rat (150–200?g).

Results: P80NvKLNs were found to be smooth surfaced, spherical shaped having average particle size of 177.80?±?0.82?nm, zeta potential of ?8.91?±?4.36?mv and %EE of 31.32?±?0.42%. P80NvKLNs remained in blood circulation for 48?h maintaining a sustained release in brain for 24?h (p?<?0.05).

Conclusion: The study proves the efficacy of Polysorbate 80 coated Kokum butter nanoparticles for brain-targeted delivery of drugs providing ample opportunities for further study.     

Bone marrow-targeted liposomal carriers

Introduction: Bone marrow-targeted drug delivery systems appear to offer a promising strategy for advancing diagnostic, protective and/or therapeutic medicine for the hematopoietic system. Liposome technology can provide a drug delivery system with high bone marrow targeting that is mediated by specific phagocytosis in bone marrow.

Area covered: This review focuses on a bone marrow-specific liposome formulation labeled with technetium-99 m. Interspecies differences in bone marrow distribution of the bone marrow-targeted formulation are emphasized. This review provides a liposome technology to target bone marrow. In addition, the selection of proper species for the investigation of bone marrow targeting is suggested.

Expert opinion: It can be speculated that the bone marrow macrophages have a role in the delivery of lipids to the bone marrow as a source of energy and for membrane biosynthesis or in the delivery of fat-soluble vitamins for hematopoiesis. This homeostatic system offers a potent pathway to deliver drugs selectively into bone marrow tissues from blood. High selectivity of the present bone marrow-targeted liposome formulation for bone marrow suggests the presence of an active and specific mechanism, but specific factors affecting the uptake of the bone marrow mononuclear phagocyte system are still unknown. Further investigation of this mechanism will increase our understanding of factors required for effective transport of agents to the bone marrow, and may provide an efficient system for bone marrow delivery for therapeutic purposes.     

Bisphosphonate-modified biomaterials for drug delivery and bone tissue engineering

Introduction: Bisphosphonates (BPs) were introduced 45 years ago as anti-osteoporotic drugs and during the last decade have been utilized as bone-targeting groups in systemic treatment of bone diseases. Very recently, strategies of chemical immobilization of BPs in hydrogels and nanocomposites for bone tissue engineering emerged. These strategies opened new applications of BPs in bone tissue engineering.

Areas covered: Conjugates of BPs to different drug molecules, imaging agents, proteins and polymers are discussed in terms of specific targeting to bone and therapeutic affect induced by the resulting prodrugs in comparison with the parent drugs. Conversion of these conjugates into hydrogel scaffolds is also presented along with the application of the resulting materials for bone tissue engineering.

Expert opinion: Calcium-binding properties of BPs can be successfully extended via different conjugation strategies not only for purposes of bone targeting, but also in supramolecular assembly affording either new nanocarriers or bulk nanocomposite scaffolds. Interaction between carrier-linked BPs and drug molecules should also be considered for the control of release of these molecules and their optimized delivery. Bone-targeting properties of BP-functionalized nanomaterials should correspond to bone adhesive properties of their bulk analogs.     

Enhancement of Bone Growth by Sustained Delivery of Recombinant Human Bone Morphogenetic Protein-2 in a Polymeric Matrix

Purpose. The purpose of this study was to develop a polymeric sustained delivery system for recombinant human bone morphogenetic protein-2 (BMP-2) and to evaluate local bone growth induced by the sustained release of BMP-2 in an animal model. Methods. BMP-2 was incorporated in biodegradable poly(D,L-lactide-co-glycolide) (PLGA) microspheres to obtain different release rates. Two sustained and an immediate release implants were produced by suspending the BMP-2 loaded PLGA microspheres in aqueous sodium carboxymethylcellulose (CMC), lyophilizing, and cutting the dried materials to the size of the animal bone defects. The local in vivo release at the implantation site in rat calvarial defects was determined by gamma scintigraphy using radiolabeled BMP-2. The local bone induction in the critical size of rabbit calvarial defects was evaluated six weeks post implantation. Results. The immediate release implant showed about 65% initial drug release within 24 h and the remaining BMP-2 quickly exhausted from the implantation site within 7 days. The sustained release implants, showing 45-55% initial release followed by a prolonged release for 21 days, released a greater amount of BMP-2 at the implantation site and maintained higher serum BMP-2 for the longer period of time compared to the immediate release implant. Significant bone growth was observed in all BMP-2 treated defects while the defects without treatment or with BMP-2-free implant showed minimal bone healing. 75-79% of rabbit calvarial defect area was healed with newly induced bone matrix by the sustained release implants in 6 weeks as compared to 45% recovery from the immediate release implant. Conclusion. The sustained delivery of BMP-2 based on the biodegradable PLGA microsphere system resulted in faster and more complete bone healing in the animal model.     

Injectable microsphere/hydrogel hybrid system containing heat shock protein as therapy in a murine myocardial infarction model

Abstract

Heat shock proteins, acting as molecular chaperones, protect heart muscle from ischemic injury and offer a potential approach to therapy. Here we describe preparation of an injectable form of heat shock protein 27, fused with a protein transduction domain (TAT-HSP27) and contained in a hybrid system of poly(d,l-lactic-co-glycolic acid) microsphere and alginate hydrogel. By varying the porous structure of the microspheres, the release of TAT-HSP27 from the hybrid system was sustained for two weeks in vitro. The hybrid system containing TAT-HSP27 was intramyocardially injected into a murine myocardial infarction model, and its therapeutic effect was evaluated in vivo. The sustained delivery of TAT-HSP27 substantially suppressed apoptosis in the infarcted site, and improved the ejection fraction, end-systolic volume and maximum pressure development in the heart. Local and sustained delivery of anti-apoptotic proteins such as HSP27 using a hybrid system may present a promising approach to the treatment of ischemic diseases.     

Nanoparticulate drug delivery platforms for advancing bone infection therapies

Introduction: The ongoing surge of resistance of bacterial pathogens to antibiotic therapies and the consistently aging median member of the human race signal an impending increase in the incidence of chronic bone infection. Nanotechnological platforms for local and sustained delivery of therapeutics hold the greatest potential for providing minimally invasive and maximally regenerative therapies for this rare but persistent condition.

Areas covered: Shortcomings of the clinically available treatment options, including poly(methyl methacrylate) beads and calcium sulfate cements, are discussed and their transcending using calcium-phosphate/polymeric nanoparticulate composites is foreseen. Bone is a composite wherein the weakness of each component alone is compensated for by the strength of its complement and an ideal bone substitute should be fundamentally the same.

Expert opinion: Discrepancy between in vitro and in vivo bioactivity assessments is highlighted, alongside the inherent imperfectness of the former. Challenges entailing the cross-disciplinary nature of engineering a new generation of drug delivery vehicles are delineated and it is concluded that the future for the nanoparticulate therapeutic carriers belongs to multifunctional, synergistic and theranostic composites capable of simultaneously targeting, monitoring and treating internal organismic disturbances in a smart, feedback fashion and in direct response to the demands of the local environment.     

Pulmonary delivery of anti-inflammatory agents

Introduction: Respiratory infections and diseases are accompanied by or exhibit inflammation. Recent advances in nanoparticle engineering technology, together with the increased knowledge of inflammatory pathophysiology, have ignited interest in the pulmonary delivery of anti-inflammatory agents (AIAs) to achieve local treatment of pulmonary inflammatory disorders.

Areas covered: This review summarizes and discusses the investigated formulation approaches for the pulmonary delivery of AIAs, including: inhalation of actives as suspensions or dry powder formulations, with polymeric micro- and nano-delivery carriers, or within liposomes and lipid nanoparticles. Some recent approaches for targeting AIAs to the pulmonary endothelium have also been reviewed. The discussion focuses on finding out whether the investigated approaches were really able to achieve lung targeting and reduce the side effects associated with the systemic administration of AIAs.

Expert opinion: The use of the inhalation route for the pulmonary delivery of AIAs is facing several challenges. Some of the investigated formulation approaches appear to be promising in overcoming these challenges. However, in order to create products that reach patients, more therapeutically oriented studies are still needed to ensure formulation stability, in-vivo sustained release behavior, pulmonary retention, and bypassing lung clearance mechanisms.     

Dextran-based hydrogel microspheres obtained in w/o emulsion: preparation,characterisation and in vivo studies

Abstract

The cross-linking reaction in w/o emulsions of dextran (DEX) functionalised with methacrylic groups, having or not acid residues in side chain, can be used to easily prepare polysaccharide hydrogel microspheres with properties suitable for drug delivery applications. The formation of a chemical network within the obtained particles was evaluated with FT-IR spectroscopy, whereas morphology and dimensions of the microspheres were investigated with optical and scanning electron microscopy. At the same time, swelling measurements were carried out on freeze-dried particles in different aqueous media simulating biological fluids. Preliminary release experiments performed with ibuprofen, betamethasone and vitamin B12 chosen as model drugs, showed that these microspheres could be suitable as modified drug delivery systems in oral formulations. Finally, in vivo writhing experiments were carried out in mice in order to verify the antinociceptive activity of betamethasone loaded into the new polysaccharide hydrogel microspheres.     

Endosomal disruptors in non-viral gene delivery

Importance of the field: Non-viral gene delivery for the treatment of genetic and non-genetic diseases has been under investigation for several decades, but there has been very little application in patients because of poor gene expression and toxicity.

Areas covered in this review: As gene delivery almost invariably involves endocytosis, many of its limitations are related to compartmentalisation of the transgene within the endosomes. Gene expression enhancers have become an essential part of manipulating endosomal release, as well as protecting transgene from intracellular degradation. However, disruption of the endosomes can also release proteases that have been shown to activate apoptotic pathways.

What the reader will gain: An understanding of the role that endosomal release plays in the toxicity of gene delivery vehicles will help identify new approaches to minimise adverse effects while enhancing non-viral gene expression.

Take home message: The future of non-viral gene therapy needs to identify new approaches that limit endosome-induced toxicity while enhancing expression so that a pharmacological response can be reliably observed in vivo.