Radiosynthesis of [N‐methyl‐11C]methylene blue

In this paper we present the radiochemical synthesis of the novel compound [N‐methyl‐¹¹C]methylene blue. The synthesis of [N‐methyl‐¹¹C]methylene blue was accomplished by means of ¹¹C‐methylation of commercially available Azure B using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). Following purification [N‐methyl‐¹¹C]methylene blue was obtained with a radiochemical purity greater than 97% in a 4–6% decay corrected radiochemical yield. The synthesis was completed in an average of 35 min following the end of bombardment. Copyright © 2003 John Wiley & Sons, Ltd.     

Methylation of the thiophene ring using Carbon‐11‐labelled methyl iodide: formation of 3‐[11C]methylthiophene

This paper describes the radiosynthesis of 3‐[¹¹C]methylthiophene, chosen as a model reaction for the preparation of heteroaromatic methylthienyl compounds. Labelling was performed from the corresponding lithiothiophene derivative and [¹¹C]methyl iodide as the alkylating agent in THF at ?78°C. The conditions used were the following: (1) trapping for 2–3 min at ?78°C of the [¹¹C]methyl iodide in the THF solution containing the freshly prepared 3‐lithiothiophene; (2) Hydrolysis of the reaction mixture by adding 0.5 ml of the HPLC mobile phase and (3) HPLC purification. 3‐[¹¹C]Methylthiophene ([¹¹C]‐ 1 ) was collected in high yield as the unique peak of the HPLC radiochromatogram. Non‐reacted [¹¹C]methyl iodide was not present. Typically, 50–60 mCi (1.85–2.22 GBq) of 3‐[¹¹C]methylthiophene ([¹¹C]‐ 1 ) were obtained within 20 min of radiosynthesis (including HPLC purification) with specific radioactivities ranging from 0.6 to 1.0 Ci/μmol (22.2–37.0 GBq/μmol) starting from 180 to 200 mCi (6.66–7.40 GBq) of [¹¹C]CO₂ (10 μA, 10 min (6000 μC) irradiation). Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]ethyl iodide from [11C]carbon monoxide and its application in alkylation reactions

A method is presented for preparing [1‐¹¹C]ethyl iodide from [¹¹C]carbon monoxide. The method utilizes methyl iodide and [¹¹C]carbon monoxide in a palladium‐mediated carbonylation reaction to form a mixture of [1‐¹¹C]acetic acid and [1‐¹¹C]methyl acetate. The acetates are reduced to [1‐¹¹C]ethanol and subsequently converted to [1‐¹¹C]ethyl iodide. The synthesis time was 20 min and the decay‐corrected radiochemical yield of [1‐¹¹C]ethyl iodide was 55 ± 5%. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Ethyl iodide was used in two model reactions, an O‐alkylation and an N‐alkylation. Starting with approximately 2.5 GBq of [¹¹C]carbon monoxide, the isolated decay‐corrected radiochemical yields for the ester and the amine derivatives were 45 ± 0.5% and 25 ± 2%, respectively, based on [¹¹C]carbon monoxide. Starting with 10 GBq of [¹¹C]carbon monoxide, 0.55 GBq of the labelled ester was isolated within 40 min with a specific radioactivity of 36 GBq/µmol. Copyright © 2004 John Wiley & Sons, Ltd.     

A 11C‐Methyl stannane (5‐[11C]methyl‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane) for use in palladium‐mediated [11C]C–C bond forming reactions with organohalides

The synthesis of a ¹¹C‐labelled methyl stannane, (5‐[¹¹C]methyl‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane ( 2 )), and its use in palladium‐mediated Stille reactions to form [¹¹C]C–C bonds are described. Stannane 2 was synthesized from iodo[¹¹C]methane, 5‐chloro‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane 1 and butyl lithium in 20–90% decay‐corrected radiochemical yield starting from iodo[¹¹C]methane. Subsequent reaction with a series of substituted aryl and vinyl halides produced the corresponding [¹¹C]methylated products 3–5 in up to 90% decay‐corrected radiochemical yield from the crude 2 . The total synthesis time, including purification, was 25–30 min from end of radionuclide production. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [O‐methyl‐11C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([11C]DMP696): a potential PET ligand for CRF1 receptors

Synthesis of [O‐methyl‐¹¹C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([¹¹C]DMP696), a highly selective CRF₁ antagonist has been achieved. The total time required for the synthesis of [¹¹C]DMP696 is 30 min from EOB using [¹¹C]methyl triflate in THF, with a 16% yield (EOS) and >99% chemical and radiochemical purities along with a specific activity of >2000 Ci/mmol (EOS). Copyright © 2004 John Wiley & Sons, Ltd.     

Highlighting the versatility of the Tracerlab synthesis modules. Part 2: fully automated production of [11C]‐labeled radiopharmaceuticals using a Tracerlab FXC‐Pro

The field of radiochemistry is moving toward exclusive use of automated synthesis modules for production of clinical radiopharmaceutical doses. Such a move not only comes with many advantages but also presents radiochemists with the challenge of re‐configuring synthesis modules for production of radiopharmaceuticals that require non‐conventional radiochemistry while maintaining full automation. Herein, we continue our series of articles showcasing the versatility of the Tracerlab FX synthesis modules by presenting straightforward, fully automated methods for preparing a range of carbon‐11 labeled radiopharmaceuticals using a Tracerlab FX_C‐Pro. Strategies for production of [¹¹C]acetate, [¹¹C]carfentanil, [¹¹C]choline, [¹¹C]3‐amino‐4‐[2‐[(di(methyl)amino)methyl]phenyl]sulfanylbenzonitrile ([¹¹C]DASB), (+)‐a‐[¹¹C]dihydroterabenazine ([¹¹C]DTBZ), [¹¹C]flumazenil ([¹¹C]FMZ), meta‐hydroxyephedrine ([¹¹C]HED), [¹¹C]methionine, [¹¹C]PBR28, [¹¹C]Pittsburgh Compound B ([¹¹C]PiB), 1‐[¹¹C]methylpiperidin‐4‐yl propionate ([¹¹C]PMP), and [¹¹C]raclopride are presented. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of (±) 3‐(6‐nitro‐2‐quinolinyl)‐[9‐methyl‐11C]‐3,9‐diazabicyclo‐[4.2.1]‐nonane ([11C‐methyl]NS 4194)

(±) 3‐(6‐Nitro‐2‐quinolinyl)‐[9‐methyl‐¹¹C]‐3,9‐diazabicyclo‐[4.2.1]‐nonane ([¹¹C‐methyl]NS 4194), a selective serotonin reuptake inhibitor (SSRI), was synthesised within 35 min after end of bombardment with a radiochemical purity >98%. It had a decay‐corrected radiochemical yield of 7% after preparative HPLC, and a specific radioactivity around 37 GBq/μmol (EOS). A typical production starting with 40 GBq [¹¹C]CO₂ yielded 800 MBq of radiolabelled [¹¹C‐methyl]NS 4194 in a formulated solution. The synthesis of the precursor to [¹¹C‐methyl]NS 4194, (±) 9‐H‐3‐[6‐nitro‐(2‐quinolinyl)]‐3,9‐diazabicyclo‐[4.2.1]‐nonane, as well as the unlabelled analogue (±) 9‐methyl 3‐[6‐nitro‐(2‐quinolinyl)]‐3,9‐diazabicyclo‐[4.2.1]‐nonane (NS 4194), are also described. Copyright © 2002 John Wiley & Sons, Ltd.     

Nitroaldol reaction of nitro[11C]methane to form 2‐(hydroxymethyl)‐2‐nitro[2‐11C]propane‐1,3‐diol and [11C]Tris

The nitroaldol reaction of nitro[¹¹C]methane and formaldehyde, which yields 2‐(hydroxymethyl)‐2‐nitro[2‐¹¹C]propane‐1,3‐diol, is explored. The fluoride‐ion‐assisted nitroaldol reaction using (C₄H₉)₄NF was rapid and provided the desired nitrotriol in more than 97% radiochemical conversion (decay‐corrected) in 3 min at room temperature. Neither 2‐nitro[2‐¹¹C]ethanol nor 2‐nitro[2‐¹¹C]propane‐1,3‐diol was observed under the reaction conditions. The preparation of 2‐amino‐2‐(hydroxymethyl)‐[2‐¹¹C]propane‐1,3‐diol ([¹¹C]Tris) was described, which was followed by the nitro‐group reduction using NiCl₂ and NaBH₄ in aqueous MeOH. The decay‐corrected radiochemical conversion to [¹¹C]Tris was 68.0±6.5% in two steps. Copyright © 2010 John Wiley & Sons, Ltd.     

A new approach for 11C–C bond formation: Synthesis of 17α‐(3′‐[11C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol

A new approach for ¹¹C–C bond formation via a Sonogashira‐like cross‐coupling reaction of terminal alkynes with [¹¹C]methyl iodide was exemplified by the synthesis of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol. The LC‐purified title compound was obtained in decay‐corrected radiochemical yields of 27–47% (n=8) based on [¹¹C]methyl iodide within 21–27 min after EOB. In a typical synthesis starting from 9.6 GBq [¹¹C]methyl iodide, 1.87 GBq of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol was synthesized in radiochemical purity >99%. The specific radioactivity ranged between 10 and 19 GBq/µmol, and the labeling position was verified by ¹³C‐NMR analysis of the corresponding ¹³C‐labeled compound. Copyright © 2003 John Wiley & Sons, Ltd.     

The automated radiosynthesis and purification of the opioid receptor antagonist, [6‐O‐methyl‐11C]diprenorphine on the GE TRACERlab FXFE radiochemistry module

[6‐O‐Methyl‐¹¹C]diprenorphine ([¹¹C]diprenorphine) is a positron emission tomography ligand used to probe the endogenous opioid system in vivo. Diprenorphine acts as an antagonist at all of the opioid receptor subtypes, that is, μ (mu), κ (kappa) and δ (delta). The radiosynthesis of [¹¹C]diprenorphine using [¹¹C]methyl iodide produced via the ‘wet’ method on a home‐built automated radiosynthesis set‐up has been described previously. Here, we describe a modified synthetic method to [¹¹C]diprenorphine performed using [¹¹C]methyl iodide produced via the gas phase method on a GE TRACERlab FX_FE radiochemistry module. Also described is the use of [¹¹C]methyl triflate as the carbon‐11 methylating agent for the [¹¹C]diprenorphine syntheses. [¹¹C]Diprenorphine was produced to good manufacturing practice standards for use in a clinical setting. In comparison to previously reported [¹¹C]diprenorphine radiosyntheisis, the method described herein gives a higher specific activity product which is advantageous for receptor occupancy studies. The radiochemical purity of [¹¹C]diprenorphine is similar to what has been reported previously, although the radiochemical yield produced in the method described herein is reduced, an issue that is inherent in the gas phase radiosynthesis of [¹¹C]methyl iodide. The yields of [¹¹C]diprenorphine are nonetheless sufficient for clinical research applications. Other advantages of the method described herein are an improvement to both reproducibility and reliability of the production as well as simplification of the purification and formulation steps. We suggest that our automated radiochemistry route to [¹¹C]diprenorphine should be the method of choice for routine [¹¹C]diprenorphine productions for positron emission tomography studies, and the production process could easily be transferred to other radiochemistry modules such as the TRACERlab FX C pro. © 2014 The Authors. Journal of Labelled Compounds and Radiopharmaceuticals Published by John Wiley & Sons Ltd.     

Synthesis of (E)‐2,3′,4,5′‐tetramethoxy[2‐11C]stilbene

In this paper, we describe the radiosynthesis of the compound (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene, a potential, universal tumour positron emission tomography imaging agent. The production of (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was carried out via ¹¹C‐methylation of (E)‐2‐(hydroxy)‐3′,4,5′‐trimethoxystilbene by using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was obtained with a radiochemical purity greater than 95% in a 20 ± 2% decay‐corrected radiochemical yield, based upon [¹¹C]carbon dioxide. Synthesis, purification and formulation were completed on an average of 30 min following the end of bombardment (EOB). The specific radioactivity obtained was 1.9 ± 0.6 GBq/µmol at EOB. Copyright © 2007 John Wiley & Sons, Ltd.     

Reductive N‐alkylation of secondary amines with [2‐11C]acetone

The development of a labeling method for secondary amines with [2‐¹¹C]acetone is described since the R₂N‐isopropyl moiety is present in many biologically active compounds. The influence of a variety of parameters (e.g. reagents, solvents, temperature, and time) on the reaction outcome is discussed. Under the optimal reaction conditions, [¹¹C]1‐isopropyl‐4‐phenylpiperazine ([¹¹C]iPPP) was synthesized from [2‐¹¹C]acetone and 1‐phenylpiperazine in a decay‐corrected radiochemical yield of 72%. The overall synthesis time, from EOB to HPLC analysis of [¹¹C]iPPP, was 20 min. Specific activity was 142–208 GBq/μmol at the end of synthesis. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of 1‐iodo‐2‐[11C]methylpropane and 2‐methyl‐1‐[11C]propanol and its application for alkylation reactions and C―C bond formation

The multitude of biologically active compounds requires the availability of a broad spectrum of radiolabeled synthons for the development of positron emission tomography (PET) tracers. The aim of this study was to synthesize 1‐iodo‐2‐[¹¹C]methylpropane and 2‐methyl‐1‐[¹¹C]propanol and investigate the use of these reagents in further radiosynthesis reactions. 2‐Methyl‐1‐[¹¹C]propanol was obtained with an average radiochemical yield of 46 ± 6% d.c. and used with fluorobenzene as starting material. High conversion rates of 85 ± 4% d.c. could be observed with HPLC, but large precursor amounts (32 mg, 333 μmol) were needed. 1‐Iodo‐2‐[¹¹C]methylpropane was synthesized with a radiochemical yield of 25 ± 7% d.c. and with a radiochemical purity of 78 ± 7% d.c. The labelling agent 1‐iodo‐2‐[¹¹C]methylpropane was coupled to thiophenol, phenol and phenylmagnesium bromide. Average radiochemical conversions of 83% d.c. for thiophenol, 40% d.c. for phenol, and 60% d.c. for phenylmagnesium bromide were obtained. In addition, [¹¹C]2‐methyl‐1‐propyl phenyl sulphide was isolated with a radiochemical yield of 5 ± 1% d.c. and a molar activity of 346 ± 113 GBq/μmol at the end of synthesis. Altogether, the syntheses of 1‐iodo‐2‐[¹¹C]methylpropane and 2‐methyl‐1‐[¹¹C]propanol were achieved and applied as proof of their applicability.     

A convenient synthesis of [11C]paraquat and other [N‐methyl‐11C]bisquaternary ammonium compounds

[¹¹C]Paraquat was synthesized by the reaction of [¹¹C]methyl triflate with the mono‐triflate salt of 1‐methyl‐[4,4′]bipyridinyl. The product was selectively separated from the precursor by a microcolumn of Chelex 100 ion exchange resin. The method was applied to the synthesis of a variety of [N‐methyl‐¹¹C]bisquaternary ammonium compounds. This is the first reported use of a chelating cation exchange resin for the selective purification of organic dications. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [18F]FETO,a novel potential 11‐β hydroxylase inhibitor

Recent publications reported high uptake of the carbon‐11 labelled 11β‐hydroxylase inhibitors (R)–[O–methyl‐¹¹C]metomidate ([¹¹C]MTO) and (R)–[O–ethyl‐¹¹C]etomidate ([¹¹C]ETO) in adrenocortical incidentalomas with excellent selectivity for positron emission tomography (PET). In our studies [¹⁸F]FETO, (the [¹⁸F]fluoroethyl ester of etomidate, (R)‐1‐(1‐phenylethyl)‐1H‐imidazole‐5‐carboxylic acid, 2′‐[¹⁸F]fluoroethyl ester), an analogue of [¹¹C]MTO and [¹¹C]ETO was chosen due to the suspected similarity of the pharmacokinetic and pharmacodynamic properties, and was prepared in the following two step procedure: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2–bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, [¹⁸F]BFE was reacted with the tetrabutylammonium salt of (R)‐1‐(1‐phenylethyl)‐1H‐imidazole‐5‐carboxylic acid to yield [¹⁸F]FETO, a novel inhibitor of the 11β‐hydroxylase. The proposed synthesis of [¹⁸F]FETO allows the production of sufficient amounts of this new PET‐tracer to serve 1–2 patients with an overall synthesis time of less than 80 min. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of [3‐13C]‐, [4‐13C]‐ and [11‐13C]‐porphobilinogen

[4‐¹³C]‐porphobilinogen 1a, [3‐¹³C]‐porphobilinogen 1b and [11‐¹³C]‐porphobilinogen 1c are prepared from [1‐¹³C]‐3‐(tetrahydropyran‐2′‐yloxy)‐propionaldehyde 2a, methyl [4‐¹³C]‐4‐nitrobutyrate 3b and [1‐¹³C]‐isocyanoacetonitrile 5c, respectively. The building blocks 2, 3 and 5 can be prepared efficiently in any isotopomeric form. Via base‐catalyzed condensation of these building blocks porphobilinogen can be enriched with ¹³C and ¹⁵N stable isotopes at any position and combination of positions. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of [11C‐carbonyl]hydroxyureas by a rhodium‐mediated carbonylation reaction using [11C]carbon monoxide

[¹¹C]Hydroxyurea has been successfully labelled using [¹¹C]carbon monoxide at low concentration. The decay‐corrected radiochemical yield was 38±3%, and the trapping efficiency of [¹¹C]carbon monoxide in the order of 90±5%. This synthesis was performed by a rhodium‐mediated carbonylation reaction starting with azidotrimethylsilane and the rhodium complex being made in situ by chloro(1,5‐cyclooctadiene)rhodium(I) dimer ([Rh(cod)Cl]₂) and 1,2‐bis(diphenylphosphino)ethane (dppe). (¹³C)Hydroxyurea was synthesized using this method and the position of the labelling was confirmed by ¹³C‐NMR. In order to perform accurate LC–MS identification, the derivative 1‐hydroxy‐3‐phenyl[¹¹C]urea was synthesized in a 35±4% decay‐corrected radiochemical yield. After 13 µA h bombardment and 21 min synthesis, 1.6 GBq of pure 1‐hydroxy‐3‐phenyl[¹¹C]urea was collected starting from 6.75 GBq of [¹¹C]carbon monoxide and the specific radioactivity of this compound was in the order of 686 GBq/µmol (3.47 nmol total mass). [¹¹C]Hydroxyurea could be used in conjunction with PET to evaluate the uptake of this anticancer agent into tumour tissue in individual patients. Copyright © 2006 John Wiley & Sons, Ltd.     

A combined loop‐SPE method for the automated preparation of [11C]doxepin

A simple and versatile loop‐solid phase extraction (SPE) method was developed for the automated preparation of [¹¹C]doxepin, a histamine H₁ receptor antagonist, from [¹¹C]methyl triflate ([¹¹C]MeOTf). This labeling agent was passed through a Teflon or Tefzel loop coated internally with a film of the precursor solution. The reaction products were then flushed from the loop to a short SPE column, where they were concentrated and then injected onto a semi‐preparative HPLC column simply by switching an injection valve. By applying this combined loop‐SPE technique the whole procedure turned out to be easily automated. The formation of [¹¹C]methylated doxepin ([¹¹C]methyldoxepin) was observed and the ratio of doxepin to methyldoxepin was found to be clearly correlated with the mass ratio of nordoxepin to MeOTf. This observation highlights the importance of [¹¹C]MeOTf specific activity in the [¹¹C]methylation of secondary amines. Using this method, [¹¹C]Doxepin was prepared in over 40% radiochemical yield from high specific activity [¹¹C]MeOTf. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]propyl and [1‐11C]butyl iodide from [11C]carbon monoxide and their use in alkylation reactions

A method to prepare [1‐¹¹C]propyl iodide and [1‐¹¹C]butyl iodide from [¹¹C]carbon monoxide via a three step reaction sequence is presented. Palladium mediated formylation of ethene with [¹¹C]carbon monoxide and hydrogen gave [1‐¹¹C]propionaldehyde and [1‐¹¹C]propionic acid. The carbonylation products were reduced and subsequently converted to [1‐¹¹C]propyl iodide. Labelled propyl iodide was obtained in 58±4% decay corrected radiochemical yield and with a specific radioactivity of 270±33 GBq/µmol within 15 min from approximately 12 GBq of [¹¹C]carbon monoxide. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Butyl iodide was obtained correspondingly from propene and approximately 8 GBq of [¹¹C]carbon monoxide, in 34±2% decay corrected radiochemical yield and with a specific radioactivity of 146±20 GBq/µmol. The alkyl iodides were used in model reactions to synthesize [O‐propyl‐1‐¹¹C]propyl and [O‐butyl‐1‐¹¹C]butyl benzoate. Propyl and butyl analogues of etomidate, a β‐11‐hydroxylase inhibitor, were also synthesized. Copyright © 2006 John Wiley & Sons, Ltd.