[carbonyl‐11C]Benzyl acetate: Automated radiosynthesis via Pd‐mediated [11C]carbon monoxide chemistry and PET measurement of brain uptake in monkey

[carbonyl‐¹¹C]Benzyl acetate ([¹¹C]1) has been proposed as a potential agent for imaging glial metabolism of acetate to glutamate and glutamine with positron emission tomography. [¹¹C]1 was synthesized from [¹¹C]carbon monoxide, iodomethane and benzyl alcohol via palladium‐mediated chemistry. The radiosynthesis was automated with a modified Synthia platform controlled with in‐house developed Labview software. Under production conditions, [¹¹C]1 was obtained in 10% (n=6) decay‐corrected radiochemical yield from [¹¹C]carbon monoxide in >96% radiochemical purity and with an average specific radioactivity of 2415 mCi/µmol. The total radiosynthesis time was about 45 min. Peak uptake of radioactivity in monkey brain (SUV=3.1) was relatively high and may be amenable to measuring uptake and metabolism of acetate in glial cells of the brain. Published in 2010 by John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]ethyl iodide from [11C]carbon monoxide and its application in alkylation reactions

A method is presented for preparing [1‐¹¹C]ethyl iodide from [¹¹C]carbon monoxide. The method utilizes methyl iodide and [¹¹C]carbon monoxide in a palladium‐mediated carbonylation reaction to form a mixture of [1‐¹¹C]acetic acid and [1‐¹¹C]methyl acetate. The acetates are reduced to [1‐¹¹C]ethanol and subsequently converted to [1‐¹¹C]ethyl iodide. The synthesis time was 20 min and the decay‐corrected radiochemical yield of [1‐¹¹C]ethyl iodide was 55 ± 5%. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Ethyl iodide was used in two model reactions, an O‐alkylation and an N‐alkylation. Starting with approximately 2.5 GBq of [¹¹C]carbon monoxide, the isolated decay‐corrected radiochemical yields for the ester and the amine derivatives were 45 ± 0.5% and 25 ± 2%, respectively, based on [¹¹C]carbon monoxide. Starting with 10 GBq of [¹¹C]carbon monoxide, 0.55 GBq of the labelled ester was isolated within 40 min with a specific radioactivity of 36 GBq/µmol. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of diethyl [carbonyl‐11C]malonate from [11C]carbon monoxide by rhodium‐promoted carbonylation and its application as a reaction intermediate

Rhodium‐mediated carbonylation reaction was applied to synthesize diethyl [carbonyl‐¹¹C]malonate using [¹¹C]carbon monoxide at low concentration. The synthesis was performed starting with ethyl diazoacetate, ethanol and the rhodium complex being made in situ by chloro(1,5‐cyclooctadiene)rhodium(I) dimer ([Rh(cod)Cl]₂) and 1,2‐bis(diphenylphosphino)ethane (dppe), and the reaction is assumed to proceed via a ketene intermediate. The isolated radiochemical yield was 20% (75% analytical radiochemical yield) and the trapping efficiency of [¹¹C]carbon monoxide in the order of 85%. The specific radioactivity of this compound was measured at 127 GBq/µmol (7.28 nmol total mass) after 8 µAh bombardment and 35 min synthesis. The corresponding ¹³C‐labelled compound was synthesized using (¹³C)carbon monoxide to confirm the position of the carbonyl‐labelled atom by ¹³C‐NMR. Diethyl [carbonyl‐¹¹C]malonate was further used in subsequent alkylation step using ethyl iodide and tetrabutylammonium fluoride to obtain diethyl diethyl [carbonyl‐¹¹C]malonate in 50% analytical radiochemical yield. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]propyl and [1‐11C]butyl iodide from [11C]carbon monoxide and their use in alkylation reactions

A method to prepare [1‐¹¹C]propyl iodide and [1‐¹¹C]butyl iodide from [¹¹C]carbon monoxide via a three step reaction sequence is presented. Palladium mediated formylation of ethene with [¹¹C]carbon monoxide and hydrogen gave [1‐¹¹C]propionaldehyde and [1‐¹¹C]propionic acid. The carbonylation products were reduced and subsequently converted to [1‐¹¹C]propyl iodide. Labelled propyl iodide was obtained in 58±4% decay corrected radiochemical yield and with a specific radioactivity of 270±33 GBq/µmol within 15 min from approximately 12 GBq of [¹¹C]carbon monoxide. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Butyl iodide was obtained correspondingly from propene and approximately 8 GBq of [¹¹C]carbon monoxide, in 34±2% decay corrected radiochemical yield and with a specific radioactivity of 146±20 GBq/µmol. The alkyl iodides were used in model reactions to synthesize [O‐propyl‐1‐¹¹C]propyl and [O‐butyl‐1‐¹¹C]butyl benzoate. Propyl and butyl analogues of etomidate, a β‐11‐hydroxylase inhibitor, were also synthesized. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [11C‐carbonyl]hydroxyureas by a rhodium‐mediated carbonylation reaction using [11C]carbon monoxide

[¹¹C]Hydroxyurea has been successfully labelled using [¹¹C]carbon monoxide at low concentration. The decay‐corrected radiochemical yield was 38±3%, and the trapping efficiency of [¹¹C]carbon monoxide in the order of 90±5%. This synthesis was performed by a rhodium‐mediated carbonylation reaction starting with azidotrimethylsilane and the rhodium complex being made in situ by chloro(1,5‐cyclooctadiene)rhodium(I) dimer ([Rh(cod)Cl]₂) and 1,2‐bis(diphenylphosphino)ethane (dppe). (¹³C)Hydroxyurea was synthesized using this method and the position of the labelling was confirmed by ¹³C‐NMR. In order to perform accurate LC–MS identification, the derivative 1‐hydroxy‐3‐phenyl[¹¹C]urea was synthesized in a 35±4% decay‐corrected radiochemical yield. After 13 µA h bombardment and 21 min synthesis, 1.6 GBq of pure 1‐hydroxy‐3‐phenyl[¹¹C]urea was collected starting from 6.75 GBq of [¹¹C]carbon monoxide and the specific radioactivity of this compound was in the order of 686 GBq/µmol (3.47 nmol total mass). [¹¹C]Hydroxyurea could be used in conjunction with PET to evaluate the uptake of this anticancer agent into tumour tissue in individual patients. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

Exploration of the labeling of [11C]tubastatin A at the hydroxamic acid site with [11C]carbon monoxide

We aimed to label tubastatin A (1) with carbon‐11 (t_1/2 = 20.4 min) in the hydroxamic acid site to provide a potential radiotracer for imaging histone deacetylase 6 in vivo with positron emission tomography. Initial attempts at a one‐pot Pd‐mediated insertion of [¹¹C]carbon monoxide between the aryl iodide (2) and hydroxylamine gave low radiochemical yields (<5%) of [¹¹C]1. Labeling was achieved in useful radiochemical yields (16.1 ± 5.6%, n = 4) through a two‐step process based on Pd‐mediated insertion of [¹¹C]carbon monoxide between the aryl iodide (2) and p‐nitrophenol to give the [¹¹C]p‐nitrophenyl ester ([¹¹C]5), followed by ultrasound‐assisted hydroxyaminolysis of the activated ester with excess hydroxylamine in a DMSO/THF mixture in the presence of a strong phosphazene base P₁‐t‐Bu. However, success in labeling the hydroxamic acid group of [¹¹C]tubastatin A was not transferable to the labeling of three other model hydroxamic acids.     

Efficient syntheses of [11C]zidovudine and its analogs by convenient one‐pot palladium(0)–copper(I) co‐mediated rapid C‐[11C]methylation

The nucleosides zidovudine (AZT), stavudine (d4T), and telbivudine (LdT) are approved for use in the treatment of human immunodeficiency virus (HIV) and hepatitis B virus (HBV) infections. To promote positron emission tomography (PET) imaging studies on their pharmacokinetics, pharmacodynamics, and applications in cancer diagnosis, a convenient one‐pot method for Pd(0)–Cu(I) co‐mediated rapid C–C coupling of [¹¹C]methyl iodide with stannyl precursor was successfully established and applied to synthesize the PET tracers [¹¹C]zidovudine, [¹¹C]stavudine, and [¹¹C]telbivudine. After HPLC purification and radiopharmaceutical formulation, the desired PET tracers were obtained with high radioactivity (6.4–7.0 GBq) and specific radioactivity (74–147 GBq/µmol) and with high chemical (>99%) and radiochemical (>99.5%) purities. This one‐pot Pd(0)–Cu(I) co‐mediated rapid C‐[¹¹C]methylation also worked well for syntheses of [methyl‐¹¹C]thymidine and [methyl‐¹¹C]4′‐thiothymidine, resulting twice the radioactivity of those prepared by a previous two‐pot method. The mechanism of one‐pot Pd(0)–Cu(I) co‐mediated rapid C‐[¹¹C]methylation was also discussed.     

A convenient synthesis of [11C]paraquat and other [N‐methyl‐11C]bisquaternary ammonium compounds

[¹¹C]Paraquat was synthesized by the reaction of [¹¹C]methyl triflate with the mono‐triflate salt of 1‐methyl‐[4,4′]bipyridinyl. The product was selectively separated from the precursor by a microcolumn of Chelex 100 ion exchange resin. The method was applied to the synthesis of a variety of [N‐methyl‐¹¹C]bisquaternary ammonium compounds. This is the first reported use of a chelating cation exchange resin for the selective purification of organic dications. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of substituted [11C]ureas and [11C]sulphonylureas by Rh(I)‐mediated carbonylation

The urea moiety is present in many biologically active compounds and thus an attractive target for ¹¹C‐labelling. To extend the scope of the rhodium(I)‐mediated carbonylative cross‐coupling reaction between an azide and an amine and investigate its tolerance for functional groups, we have synthesized eight ureas and two sulphonylureas that were ¹¹C‐labelled in the carbonyl position. The decay‐corrected analytical radiochemical yields were in the range of 14–96% (from [¹¹C]carbon monoxide). For example: starting from 1.33 GBq [¹¹C]carbon monoxide, 0.237 GBq (66%) of the cytotoxic sulphonylurea [¹¹C]LY‐181984 11 was isolated within 60 min from end of bombardment. The mild reaction conditions and generality regarding functional groups of this method make it an attractive alternative to the [¹¹C]phosgene method for the synthesis of ¹¹C‐labelled ureas. Copyright © 2010 John Wiley & Sons, Ltd.     

Radiosynthesis of [N‐methyl‐11C]methylene blue

In this paper we present the radiochemical synthesis of the novel compound [N‐methyl‐¹¹C]methylene blue. The synthesis of [N‐methyl‐¹¹C]methylene blue was accomplished by means of ¹¹C‐methylation of commercially available Azure B using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). Following purification [N‐methyl‐¹¹C]methylene blue was obtained with a radiochemical purity greater than 97% in a 4–6% decay corrected radiochemical yield. The synthesis was completed in an average of 35 min following the end of bombardment. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of 1‐iodo‐2‐[11C]methylpropane and 2‐methyl‐1‐[11C]propanol and its application for alkylation reactions and C―C bond formation

The multitude of biologically active compounds requires the availability of a broad spectrum of radiolabeled synthons for the development of positron emission tomography (PET) tracers. The aim of this study was to synthesize 1‐iodo‐2‐[¹¹C]methylpropane and 2‐methyl‐1‐[¹¹C]propanol and investigate the use of these reagents in further radiosynthesis reactions. 2‐Methyl‐1‐[¹¹C]propanol was obtained with an average radiochemical yield of 46 ± 6% d.c. and used with fluorobenzene as starting material. High conversion rates of 85 ± 4% d.c. could be observed with HPLC, but large precursor amounts (32 mg, 333 μmol) were needed. 1‐Iodo‐2‐[¹¹C]methylpropane was synthesized with a radiochemical yield of 25 ± 7% d.c. and with a radiochemical purity of 78 ± 7% d.c. The labelling agent 1‐iodo‐2‐[¹¹C]methylpropane was coupled to thiophenol, phenol and phenylmagnesium bromide. Average radiochemical conversions of 83% d.c. for thiophenol, 40% d.c. for phenol, and 60% d.c. for phenylmagnesium bromide were obtained. In addition, [¹¹C]2‐methyl‐1‐propyl phenyl sulphide was isolated with a radiochemical yield of 5 ± 1% d.c. and a molar activity of 346 ± 113 GBq/μmol at the end of synthesis. Altogether, the syntheses of 1‐iodo‐2‐[¹¹C]methylpropane and 2‐methyl‐1‐[¹¹C]propanol were achieved and applied as proof of their applicability.     

Synthesis of 1,1′ [11C]‐methylene‐di‐(2‐naphthol) ([11C]ST1859) for PET studies in humans

1,1′‐Methylene‐di‐(2‐naphthol) (ST1859), a candidate drug for the treatment of Alzheimer's disease, was radiolabelled with carbon‐11 with the aim to perform PET microdosing studies in humans. The radiosynthesis was automated in a commercial synthesis module (Nuclear Interface PET tracer synthesizer) and proceeded via reaction of [¹¹C]formaldehyde with 2‐naphthol. [¹¹C]formaldehyde was prepared by catalytic dehydrogenation of [¹¹C]methanol (conversion yield: 48±11% (n = 19)) employing a recently developed silver‐containing ceramic catalyst. Starting from 69±3 GBq of [¹¹C]carbon dioxide (n = 19), 4±1 GBq of [¹¹C]ST1859 (decay‐corrected to the end of bombardment), readily formulated for intravenous administration, could be obtained in an average synthesis time of 38 min. The specific radioactivity of [¹¹C]ST1859 at the end of synthesis exceeded 32 GBq/µmol. Copyright © 2005 John Wiley & Sons, Ltd.     

Radiosynthesis of a 2‐substituted 4,5‐dihydro‐1H‐[2‐11C] imidazole: the I2 imidazoline receptor ligand [11C] benazoline

Benazoline (2‐naphthalen‐2‐yl‐4,5‐dihydro‐1H‐imidazole) is a selective high‐affinity ligand for the imidazoline I₂ receptor. This compound was labelled with carbon‐11 (T_1/2=20.4 min) at the number two carbon atom of its 2‐imidazoline ring. Cyclotron‐produced [¹¹C]carbon dioxide reacted with 2‐naphthylmagnesium bromide to give 2‐[carboxyl‐¹¹C]naphthoic acid in 60% radiochemical yield. The latter was heated with a mixture of ethylenediamine and its dihydrochloride at 300°C to give [¹¹C]benazoline in 16% overall yield, relative to [¹¹C]carbon dioxide and with a specific radioactivity of 54 GBq/μmol, decay corrected for end of irradiation. The procedure requires about 45 min from end of cyclotron irradiation. This method should be extendable to other imidazolines. Copyright © 2003 John Wiley & Sons, Ltd.     

N‐heterocyclic carbenes as ligands in palladium‐mediated [11C]radiolabelling of [11C]amides for positron emission tomography

A model palladium‐mediated carbonylation reaction synthesizing N‐benzylbenzamide from iodobenzene and benzylamine was used to investigate the potential of four N‐heterocyclic carbenes (N,N′‐bis(diisopropylphenyl)‐4,5‐dihydroimidazolinium chloride ( I ), N,N′‐bis(1‐mesityl)‐4,5‐dihydroimidazolinium chloride ( II ), N,N′‐bis(1‐mesityl)imidazolium chloride ( III ) and N,N′‐bis(1‐adamantyl)imidazolium chloride ( IV )) to act as supporting ligands in combination with Pd₂(dba)₃. Their activities were compared with other Pd‐diphosphine complexes after reaction times of 10 and 120 min. Pd₂(dba)₃ and III were the best performing after 10 min reaction (20%) and was used to synthesize radiolabelled [¹¹C]N‐benzylbenzamide in good radiochemical yield (55%) and excellent radiochemical purity (99%). A Cu(Tp*) complex was used to trap the typically unreactive and insoluble [¹¹C]CO which was then released and reacted via the Pd‐mediated carbonylation process. Potentially useful side products [¹¹C]N,N′‐dibenzylurea and [¹¹C]benzoic acid were also observed. Increased amounts of [¹¹C]N,N′‐dibenzylurea were yielded when PdCl₂ was the Pd precursor. Reduced yields of [¹¹C]benzoic acid and therefore improved RCP were seen for III /Pd₂(dba)₃ over commonly used dppp/Pd₂(dba)₃ making it more favourable in this case. Copyright © 2010 John Wiley & Sons, Ltd.     

[5‐14C]‐4‐methyltriazolepyridines via facile preparation of methyl‐[14C]‐isothiocyanate

A fast and convenient microwave assisted one‐pot synthesis of methyl‐[¹⁴C]‐isothiocyanate 4 was shown. The continued one‐pot synthesis with 4 to a highly refined material like [5‐¹⁴C]‐dimethylsulfanyltriazolepyridines 8 and 13 without any intermediate purification, six steps in the same pot from [¹⁴C]KCN. Oxidation of the sulfur provided access to triazole‐ethers upon reaction with alcohols. The triazole‐ethers, 15, were obtained at fair to good yields and specific activities above 2 GBq/mmol. Copyright © 2008 John Wiley & Sons, Ltd.     

A 11C‐Methyl stannane (5‐[11C]methyl‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane) for use in palladium‐mediated [11C]C–C bond forming reactions with organohalides

The synthesis of a ¹¹C‐labelled methyl stannane, (5‐[¹¹C]methyl‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane ( 2 )), and its use in palladium‐mediated Stille reactions to form [¹¹C]C–C bonds are described. Stannane 2 was synthesized from iodo[¹¹C]methane, 5‐chloro‐1‐aza‐5‐stanna‐bicyclo[3.3.3]undecane 1 and butyl lithium in 20–90% decay‐corrected radiochemical yield starting from iodo[¹¹C]methane. Subsequent reaction with a series of substituted aryl and vinyl halides produced the corresponding [¹¹C]methylated products 3–5 in up to 90% decay‐corrected radiochemical yield from the crude 2 . The total synthesis time, including purification, was 25–30 min from end of radionuclide production. Copyright © 2003 John Wiley & Sons, Ltd.     

Reductive N‐alkylation of secondary amines with [2‐11C]acetone

The development of a labeling method for secondary amines with [2‐¹¹C]acetone is described since the R₂N‐isopropyl moiety is present in many biologically active compounds. The influence of a variety of parameters (e.g. reagents, solvents, temperature, and time) on the reaction outcome is discussed. Under the optimal reaction conditions, [¹¹C]1‐isopropyl‐4‐phenylpiperazine ([¹¹C]iPPP) was synthesized from [2‐¹¹C]acetone and 1‐phenylpiperazine in a decay‐corrected radiochemical yield of 72%. The overall synthesis time, from EOB to HPLC analysis of [¹¹C]iPPP, was 20 min. Specific activity was 142–208 GBq/μmol at the end of synthesis. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of NCA [carbonyl‐11C]amides by direct reaction of in situ generated [11C]carboxymagnesium halides with amines under microwave‐enhanced conditions

No‐carrier‐added (NCA) aromatic and aliphatic [carbonyl‐¹¹C]amides were rapidly (<5 min) synthesized in one pot in useful radiochemical yields (20–65%, decay‐corrected) by directly coupling amines with NCA [¹¹C]carboxyhyphenmagnesium halides generated in situ from Grignard reagents and cyclotron‐produced [¹¹C]carbon dioxide. In this system cyclohexylcarboxymagnesium chloride ( 1b ) is more reactive than 4‐fluorophenylcarboxymagnesium bromide ( 2b ) and primary amines (e.g. aniline, aminopyridines) far more reactive than secondary amines (e.g. 2‐(methylamino)pyridine). The scope of the reaction was widened considerably by the application of microwaves, which allowed reactions to be carried out at much higher temperature than the boiling point of the solvent (i.e. tetrahydrofuran, b.p. 67°C). Copyright © 2003 John Wiley & Sons, Ltd.     

One‐pot synthesis of [11C]ureas via triphenylphosphinimines

A series of ¹¹C‐labeled ureas was prepared using a rapid and efficient one‐pot procedure. First, the intermediate [¹¹C]phenylisocyanate was formed with phenyltriphenylphosphinimine and [¹¹C]CO₂. A range of amines was then reacted with the [¹¹C]phenylisocyanate yielding the [¹¹C]urea derivatives in short synthesis times. This easy‐to‐handle method circumvents disadvantages of known procedures and generates the possibility to prepare other kinds of ¹¹C‐labeled compounds using a variety of phenylphosphinimines in combination with different nucleophiles. The presented approach is an alternative to the use of established methods in ¹¹C‐labeling chemistry. Copyright © 2006 John Wiley & Sons, Ltd.