Four-dimensional ultrafast electron microscopy

Electron microscopy is arguably the most powerful tool for spatial imaging of structures. As such, 2D and 3D microscopies provide static structures with subnanometer and increasingly with ångstrom-scale spatial resolution. Here we report the development of 4D ultrafast electron microscopy, whose capability imparts another dimension to imaging in general and to dynamics in particular. We demonstrate its versatility by recording images and diffraction patterns of crystalline and amorphous materials and images of biological cells. The electron packets, which were generated with femtosecond laser pulses, have a de Broglie wavelength of 0.0335 Å at 120 keV and have as low as one electron per pulse. With such few particles, doses of few electrons per square ångstrom, and ultrafast temporal duration, the long sought after but hitherto unrealized quest for ultrafast electron microscopy has been realized. Ultrafast electron microscopy should have an impact on all areas of microscopy, including biological imaging.     

Breaking resolution limits in ultrafast electron diffraction and microscopy

Ultrafast electron microscopy and diffraction are powerful techniques for the study of the time-resolved structures of molecules, materials, and biological systems. Central to these approaches is the use of ultrafast coherent electron packets. The electron pulses typically have an energy of 30 keV for diffraction and 100-200 keV for microscopy, corresponding to speeds of 33-70% of the speed of light. Although the spatial resolution can reach the atomic scale, the temporal resolution is limited by the pulse width and by the difference in group velocities of electrons and the light used to initiate the dynamical change. In this contribution, we introduce the concept of tilted optical pulses into diffraction and imaging techniques and demonstrate the methodology experimentally. These advances allow us to reach limits of time resolution down to regimes of a few femtoseconds and, possibly, attoseconds. With tilted pulses, every part of the sample is excited at precisely the same time as when the electrons arrive at the specimen. Here, this approach is demonstrated for the most unfavorable case of ultrafast crystallography. We also present a method for measuring the duration of electron packets by autocorrelating electron pulses in free space and without streaking, and we discuss the potential of tilting the electron pulses themselves for applications in domains involving nuclear and electron motions.     

Scanning ultrafast electron microscopy

Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.     

Single-electron pulses for ultrafast diffraction

Visualization of atomic-scale structural motion by ultrafast electron diffraction and microscopy requires electron packets of shortest duration and highest coherence. We report on the generation and application of single-electron pulses for this purpose. Photoelectric emission from metal surfaces is studied with tunable ultraviolet pulses in the femtosecond regime. The bandwidth, efficiency, coherence, and electron pulse duration are investigated in dependence on excitation wavelength, intensity, and laser bandwidth. At photon energies close to the cathode's work function, the electron pulse duration shortens significantly and approaches a threshold that is determined by interplay of the optical pulse width and the acceleration field. An optimized choice of laser wavelength and bandwidth results in sub-100-fs electron pulses. We demonstrate single-electron diffraction from polycrystalline diamond films and reveal the favorable influences of matched photon energies on the coherence volume of single-electron wave packets. We discuss the consequences of our findings for the physics of the photoelectric effect and for applications of single-electron pulses in ultrafast 4D imaging of structural dynamics.     

Attosecond electron pulses for 4D diffraction and microscopy

In this contribution, we consider the advancement of ultrafast electron diffraction and microscopy to cover the attosecond time domain. The concept is centered on the compression of femtosecond electron packets to trains of 15-attosecond pulses by the use of the ponderomotive force in synthesized gratings of optical fields. Such attosecond electron pulses are significantly shorter than those achievable with extreme UV light sources near 25 nm ( approximately 50 eV) and have the potential for applications in the visualization of ultrafast electron dynamics, especially of atomic structures, clusters of atoms, and some materials.     

Thermal Nonlinear Klein–Gordon Equation for Nano-/Micro-Sized Metallic Particle–Attosecond Laser Pulse Interaction

In this study, a rigorous analytical solution to the thermal nonlinear Klein–Gordon equation in the Kozłowski version is provided. The Klein–Gordon heat equation is solved via the Zhukovsky “state-of-the-art” mathematical techniques. Our study can be regarded as an initial approximation of attosecond laser–particle interaction when the prevalent phenomenon is photon–electron interaction. The electrons interact with the laser beam, which means that the nucleus does not play a significant role in temperature distribution. The particle is supposed to be homogenous with respect to thermophysical properties. This theoretical approach could prove useful for the study of metallic nano-/micro-particles interacting with attosecond laser pulses. Specific applications for Au “nano” particles with a 50 nm radius and “micro” particles with 110, 130, 150, and 1000 nm radii under 100 attosecond laser pulse irradiation are considered. First, the cross-section is supposed to be proportional to the area of the particle, which is assumed to be a perfect sphere of radius R or a rotation ellipsoid. Second, the absorption coefficient is calculated using a semiclassical approach, taking into account the number of atoms per unit volume, the classical electron radius, the laser wavelength, and the atomic scattering factor (10 in case of Au), which cover all the basic aspects for the interaction between the attosecond laser and a nanoparticle. The model is applicable within the 100–2000 nm range. The main conclusion of the model is that for a range inferior to 1000 nm, a competition between ballistic and thermal phenomena occurs. For values in excess of 1000 nm, our study suggests that the thermal phenomena are dominant. Contrastingly, during the irradiation with fs pulses, this value is of the order of 100 nm. This theoretical model’s predictions could be soon confirmed with the new EU-ELI facilities in progress, which will generate pulses of 100 as at a 30 nm wavelength.     

Biological imaging with 4D ultrafast electron microscopy

Advances in the imaging of biological structures with transmission electron microscopy continue to reveal information at the nanometer length scale and below. The images obtained are static, i.e., time-averaged over seconds, and the weak contrast is usually enhanced through sophisticated specimen preparation techniques and/or improvements in electron optics and methodologies. Here we report the application of the technique of photon-induced near-field electron microscopy (PINEM) to imaging of biological specimens with femtosecond (fs) temporal resolution. In PINEM, the biological structure is exposed to single-electron packets and simultaneously irradiated with fs laser pulses that are coincident with the electron pulses in space and time. By electron energy-filtering those electrons that gained photon energies, the contrast is enhanced only at the surface of the structures involved. This method is demonstrated here in imaging of protein vesicles and whole cells of Escherichia coli, both are not absorbing the photon energy, and both are of low-Z contrast. It is also shown that the spatial location of contrast enhancement can be controlled via laser polarization, time resolution, and tomographic tilting. The high-magnification PINEM imaging provides the nanometer scale and the fs temporal resolution. The potential of applications is discussed and includes the study of antibodies and immunolabeling within the cell.     

4D multiple-cathode ultrafast electron microscopy

Four-dimensional multiple-cathode ultrafast electron microscopy is developed to enable the capture of multiple images at ultrashort time intervals for a single microscopic dynamic process. The dynamic process is initiated in the specimen by one femtosecond light pulse and probed by multiple packets of electrons generated by one UV laser pulse impinging on multiple, spatially distinct, cathode surfaces. Each packet is distinctly recorded, with timing and detector location controlled by the cathode configuration. In the first demonstration, two packets of electrons on each image frame (of the CCD) probe different times, separated by 19 picoseconds, in the evolution of the diffraction of a gold film following femtosecond heating. Future elaborations of this concept to extend its capabilities and expand the range of applications of 4D ultrafast electron microscopy are discussed. The proof-of-principle demonstration reported here provides a path toward the imaging of irreversible ultrafast phenomena of materials, and opens the door to studies involving the single-frame capture of ultrafast dynamics using single-pump/multiple-probe, embedded stroboscopic imaging.In 4D ultrafast electron microscopy (UEM), ultrafast light pulses generate electron packets by photoemission at the cathode of an electron microscope, and these are used to probe a dynamic process initiated by heating or exciting the microscopic specimen with a second, synchronized ultrafast light pulse (1, 2). In conventional implementations, each pump pulse on the specimen is accompanied by one suitably delayed laser pulse on the cathode to generate one packet of electrons probing a single time point in the evolution of the specimen. A record of the full course of temporal evolution of the specimen is then constructed by repeating the experiment multiple times with variation of the delay time between the two light pulses, reading out a separate CCD image for each delay time. Thus, information about different time points in the dynamic response of the specimen is obtained from different excitation events. This implementation is ideally suited for a specimen that undergoes irreversible but sufficiently well-defined dynamics to allow a new specimen area to be used for each time point (Fig. 1A), or for a specimen that recovers fully to allow repeated identical excitations of the same area (Fig. 1B); see also Methodology. The applications of these two approaches are numerous, as highlighted in a recent review account of the work (3).Open in a separate windowFig. 1.Variant implementations of UEM. (A) Single-pulse UEM, which enables single-shot imaging of homogeneous specimens. (B) Stroboscopic UEM. (D) Multiple-cathode UEM. For comparison, we include, in C, the single-cathode, deflection method. See text for details.For the study of completely nonrepetitive dynamics, for example, a stochastic process in a heterogeneous sample that does not return to its initial configuration, a series of snapshots following a single excitation event can provide the only direct and detailed view of the evolution. Observing the effects of a single excitation pulse with video-mode imaging can currently reach millisecond-scale time resolution, far short of the time scale for many phenomena of interest in nanoscale materials science, chemistry, and physics. Nanosecond resolution has been reached (4) by combining one excitation pulse with a train of light pulses on a single cathode, with deflection of the imaging electrons after passing the specimen plane to direct each successive pulse to a new region of the detector (Fig. 1C). This nanosecond method has been successfully used with a high-speed electrostatic deflector array to obtain time sequences of irreversible and stochastic processes (5, 6).Here we demonstrate a technique that removes any limit on time resolution imposed by image deflection and in a single frame enables the capture of ultrafast phenomena. With this approach, it is possible to probe and distinctly record multiple time points in a dynamic process following a single initiation pulse. The probing electron packets are all generated by a single light pulse that impinges on multiple, spatially distinct, cathode surfaces (Fig. 1D). Time separations between packets in the electron-pulse train are adjusted by the cathode spatial and electrostatic configuration. In the present application, two electron packets, generated from two source locations at the same potential and separated in time by 19 picoseconds (ps), are recorded on each CCD frame after undergoing diffraction in a gold film following femtosecond heating. The packets originate from different cathode locations, pass through the same area of the specimen, and are recorded at distinct locations on the detector, thereby encoding two different time points in the evolution of the specimen. The results obtained provide the basis for exploration of expanded application of the multiple-cathode concept.     

Studies on Electron Escape Condition in Semiconductor Nanomaterials via Photodeposition Reaction

In semiconductor material-driven photocatalysis systems, the generation and migration of charge carriers are core research contents. Among these, the separation of electron-hole pairs and the transfer of electrons to a material’s surface played a crucial role. In this work, photodeposition, a photocatalysis reaction, was used as a “tool” to point out the electron escaping sites on a material’s surface. This “tool” could be used to visually indicate the active particles in photocatalyst materials. Photoproduced electrons need to be transferred to the surface, and they will only participate in reactions at the surface. By reacting with escaped electrons, metal ions could be reduced to nanoparticles immediately and deposited at electron come-out sites. Based on this, the electron escaping conditions of photocatalyst materials have been investigated and surveyed through the photodeposition of platinum. Our results indicate that, first, in monodispersed nanocrystal materials, platinum nanoparticles deposited randomly on a particle’s surface. This can be attributed to the abundant surface defects, which provide driving forces for electron escaping. Second, platinum nanoparticles were found to be deposited, preferentially, on one side in heterostructured nanocrystals. This is considered to be a combination result of work function difference and existence of heterojunction structure.     

Four-dimensional ultrafast electron microscopy of phase transitions

Reported here is direct imaging (and diffraction) by using 4D ultrafast electron microscopy (UEM) with combined spatial and temporal resolutions. In the first phase of UEM, it was possible to obtain snapshot images by using timed, single-electron packets; each packet is free of space-charge effects. Here, we demonstrate the ability to obtain sequences of snapshots ("movies") with atomic-scale spatial resolution and ultrashort temporal resolution. Specifically, it is shown that ultrafast metal-insulator phase transitions can be studied with these achieved spatial and temporal resolutions. The diffraction (atomic scale) and images (nanometer scale) we obtained manifest the structural phase transition with its characteristic hysteresis, and the time scale involved (100 fs) is now studied by directly monitoring coordinates of the atoms themselves.     

Context-sensitive synaptic plasticity and temporal-to-spatial transformations in hippocampal slices

Hippocampal slices are used to show that, as a temporal input pattern of activity flows through a neuronal layer, a temporal-to-spatial transformation takes place. That is, neurons can respond selectively to the first or second of a pair of input pulses, thus transforming different temporal patterns of activity into the activity of different neurons. This is demonstrated using associative long-term potentiation of polysynaptic CA1 responses as an activity-dependent marker: by depolarizing a postsynaptic CA1 neuron exclusively with the first or second of a pair of pulses from the dentate gyrus, it is possible to “tag” different subpopulations of CA3 neurons. This technique allows sampling of a population of neurons without recording simultaneously from multiple neurons. Furthermore, it reflects a biologically plausible mechanism by which single neurons may develop selective responses to time-varying stimuli and permits the induction of context-sensitive synaptic plasticity. These experimental results support the view that networks of neurons are intrinsically able to process temporal information and that it is not necessary to invoke the existence of internal clocks or delay lines for temporal processing on the time scale of tens to hundreds of milliseconds.     

Femtosecond spectroscopy of excitation energy transfer and initial charge separation in the reaction center of the photosynthetic bacterium Rhodopseudomonas viridis

Reaction centers from the photosynthetic bacterium Rhodopseudomonas viridis have been excited within the near-infrared absorption bands of the dimeric primary donor (P), of the “accessory” bacteriochlorophylls (B), and of the bacteriopheophytins (H) by using laser pulses of 150-fsec duration. The transfer of excitation energy between H, B, and P occurs in slightly less than 100 fsec and leads to the ultrafast formation of an excited state of P. This state is characterized by a broad absorption spectrum and exhibits stimulated emission. It decays in 2.8 ± 0.2 psec with the simultaneous oxidation of the primary donor and reduction of the bacteriopheophytin acceptor, which have been monitored at 545, 675, 815, 830, and 1310 nm. Although a transient bleaching relaxing in 400 ± 100 fsec is specifically observed upon excitation and observation in the 830-nm absorption band, we have found no indication that an accessory bacteriochlorophyll is involved as a resolvable intermediary acceptor in the primary electron transfer process.     

Photon gating in four-dimensional ultrafast electron microscopy

Ultrafast electron microscopy (UEM) is a pivotal tool for imaging of nanoscale structural dynamics with subparticle resolution on the time scale of atomic motion. Photon-induced near-field electron microscopy (PINEM), a key UEM technique, involves the detection of electrons that have gained energy from a femtosecond optical pulse via photon–electron coupling on nanostructures. PINEM has been applied in various fields of study, from materials science to biological imaging, exploiting the unique spatial, energy, and temporal characteristics of the PINEM electrons gained by interaction with a “single” light pulse. The further potential of photon-gated PINEM electrons in probing ultrafast dynamics of matter and the optical gating of electrons by invoking a “second” optical pulse has previously been proposed and examined theoretically in our group. Here, we experimentally demonstrate this photon-gating technique, and, through diffraction, visualize the phase transition dynamics in vanadium dioxide nanoparticles. With optical gating of PINEM electrons, imaging temporal resolution was improved by a factor of 3 or better, being limited only by the optical pulse widths. This work enables the combination of the high spatial resolution of electron microscopy and the ultrafast temporal response of the optical pulses, which provides a promising approach to attain the resolution of few femtoseconds and attoseconds in UEM.In ultrafast electron microscopy (UEM) (1–3), electrons generated by photoemission at the cathode of a transmission electron microscope are accelerated down the microscope column to probe the dynamic evolution of a specimen initiated by an ultrafast light pulse. The use of femtosecond lasers to generate the electron probe and excite the specimen has made it possible to achieve temporal resolution on the femtosecond time scale, as determined by the cross-correlation of the optical and electron pulses. One important method in the UEM repertoire is photon-induced near-field electron microscopy (PINEM) (4, 5), in which the dynamic response detected by the electron probe is the pump-induced charge density redistribution in nanoscale specimens (6).Photon–electron coupling is the basic building block of PINEM, which takes place in the presence of nanostructures when the energy-momentum conservation condition is satisfied (4, 5). This coupling leads to inelastic gain/loss of photon quanta by electrons in the electron packet, which can be resolved in the electron energy spectrum (5, 7, 8). This spectrum consists of discrete peaks, spectrally separated by multiples of the photon energy (n?ω), on the higher and lower energy sides of the zero loss peak (ZLP) (4) (Fig. 1). The development of PINEM enables the visualization of the spatiotemporal dielectric response of nanostructures (9), visualization of plasmonic fields (4, 5) and their spatial interferences (10), imaging of low atomic number nanoscale materials (11), characterization of ultrashort electron packets (12, 13), and imaging of different biological structures (14).Open in a separate windowFig. 1.Concept of photon gating in 4D electron microscopy. (A) The microscope column with one electron (dark blue) and two optical (red) pulses focused onto the specimen. The wavefunctions of the three pulses are schematically shown at the top. One optical pulse is coincident with the electron pulse at the specimen to generate a PINEM signal. The resulting light blue PINEM pulse is sliced out from other electrons for detection as an energy spectrum, an image, or a diffraction signal (see the text). The second optical pulse initiates the dynamics to be probed. (B) Electron energy spectrum generated at the specimen plane when optical and electron pulses arrive simultaneously. The gain energy range is shaded light blue. (C) Illustration for the temporal pulse sequence, two optical and one electron pulse for ultrafast time-resolved PINEM measurements.As shown by Park et al. (5), the PINEM intensity (I_PINEM) is given by the square modulus of the field integral F˜0 (i.e., IPINEM∝|F˜0|2), in the weak interaction limit. The near field of a nanoparticle leads to the scattering of the electron packet, which can be treated rigorously using the Schrödinger equation/Mie scattering theory. It follows that PINEM images the object and displays its field characteristics depending on its shape, the polarization and wavelength of optical excitation, and the width of pulses used. For a spherical nanoparticle, the field integral at point (x, y) in the specimen plane is simplified to give (6)F˜0≈−iE˜0⁡cos⁡ϕχs 23 a3(Δk)2K[Δkb],[1]where E˜0 is the electric field amplitude of the incident light, ? the light polarization angle, a the particle radius, b=x2+y2 the impact parameter, K the modified Bessel function of the second type, Δk the momentum change of the electron, and χ_s = 3(ε ? 1)/(ε + 2), where χ_s is the material susceptibility and ε the dielectric function.In previous studies of the parameters in Eq. 1, only E˜0 was time dependent. The PINEM intensity, at a given point in space, was a function only of the time delay between the optical and electron pulses, providing, for the pulse lengths currently used, a cross-correlation profile when this delay was scanned across the time of temporal coincidence, or t = 0 (4, 5, 9, 13). Hitherto, PINEM has not been used to study the ultrafast dynamics of matter. Here, we follow the strategy of using the PINEM gain electrons generated by a first optical pulse, whose delay relative to the electron pulse is maintained at t = 0, to probe dynamics initiated by introduction of a second optical pulse on the specimen, as proposed theoretically in ref. 15. By this approach, we were able to optically gate the electron pulse (i.e., create an electron pulse that only lasts for the duration of the optical pulse) and achieve significant enhancement of the temporal resolution (see the second paragraph below).The concept of the experiment is illustrated by Fig. 1A, in which the electron pulse in blue and one optical pulse (P₁) in red are shown arriving at the specimen plane simultaneously. Interaction between photon and electron in the presence of the specimen “slices out” the light blue pulse of gain electrons, which are separated from all other electrons by energy dispersion or filtering to be detected according to microscope settings in spectroscopy, imaging, or diffraction mode, as illustrated schematically at the bottom of the column. Note, it is possible to obtain PINEM diffraction, but this is not the subject of this paper. A second, or pump, optical pulse (P₂) is shown below the specimen, having already triggered the dynamics of interest. A series of time axes is plotted in Fig. 1C showing examples of characteristic sequences of pulse arrival times at the specimen plane during the experiment, with the pump arrival defining the zero of time.A striking feature of this technique that was alluded to above is the potential for high temporal resolution, unlimited by the electron pulse duration, because the optical pulse acts as a temporal gate for a longer electron pulse. In the weak interaction limit, the duration of the pulse of PINEM electrons emulates that of the optical pulse that created it (15), as clearly shown in Fig. 1A. When these photon-gated electrons are used to probe dynamics triggered by a second ultrafast optical pulse, the time resolution is determined by the cross-correlation of the two optical pulses. This paves the way for the realization of attosecond electron microscopy, as done in all-optical spectroscopy (16) but with the spatial resolution being that of atomic motions. As suggested in Fig. 1A, we envisage the use of the photon-gated electron pulses, in imaging or in diffraction mode, for the study of a variety of optically initiated material processes, either of the nanostructure or of its surrounding media.The PINEM signal can be directly monitored to detect changes in any of the specimen optical or physical properties expressed in Eq. 1. Here, we demonstrate the use of the time-resolved PINEM technique where it is shown that the photoinduced dielectric response of VO₂—which is strongly related to the lattice symmetry (17)—manifests itself in a change in PINEM intensity. We relate the changes in optical properties of the polycrystalline VO₂ nanoparticles to the phase transition dynamics from initial (monoclinic) insulator phase to (tetragonal) metal phase, the subject of numerous previous studies.Vanadium dioxide has been discussed as an active metamaterial (18) and one of the best candidates for solid-state ultrafast optical switches in photonics applications (19, 20) due to its unique structural photoinduced phase transition behavior (21). This phase transition has been examined by investigating the change in the heat capacity through thermal excitation (22, 23), whereas its ultrafast dynamics has been studied by optical spectroscopy (24, 25), THz spectroscopy (26, 27), X-ray diffraction (28, 29), ultrafast electron crystallography (30), and electron microscopy (31).     

Infrared PINEM developed by diffraction in 4D UEM

The development of four-dimensional ultrafast electron microscopy (4D UEM) has enabled not only observations of the ultrafast dynamics of photon–matter interactions at the atomic scale with ultrafast resolution in image, diffraction, and energy space, but photon–electron interactions in the field of nanoplasmonics and nanophotonics also have been captured by the related technique of photon-induced near-field electron microscopy (PINEM) in image and energy space. Here we report a further extension in the ongoing development of PINEM using a focused, nanometer-scale, electron beam in diffraction space for measurements of infrared-light-induced PINEM. The energy resolution in diffraction mode is unprecedented, reaching 0.63 eV under the 200-keV electron beam illumination, and separated peaks of the PINEM electron-energy spectrum induced by infrared light of wavelength 1,038 nm (photon energy 1.2 eV) have been well resolved for the first time, to our knowledge. In a comparison with excitation by green (519-nm) pulses, similar first-order PINEM peak amplitudes were obtained for optical fluence differing by a factor of more than 60 at the interface of copper metal and vacuum. Under high fluence, the nonlinear regime of IR PINEM was observed, and its spatial dependence was studied. In combination with PINEM temporal gating and low-fluence infrared excitation, the PINEM diffraction method paves the way for studies of structural dynamics in reciprocal space and energy space with high temporal resolution.Since its invention in the 1930s by Knoll and Ruska (1), the electron microscope has become a powerful tool in the fields of physics, chemistry, materials, and biology. A great variety of techniques related to the electron microscope has been developed in image, diffraction, and energy space (2, 3), with the spatial and energy resolutions of the transmission electron microscope now reaching 0.5 Å with Cs corrector (4) and sub-100 meV with electron monochromators (5, 6), respectively.To these capabilities of spatial and energy resolution has been added the high resolution in the fourth dimension (time) by the development of four-dimensional ultrafast electron microscopy (4D UEM) (7–9), currently enabling nanoscale dynamic studies with temporal resolution that is 10 orders of magnitude better than the millisecond range of video-camera-rate recording in conventional microscopes. In 4D UEM, ultrafast time resolution is reached by using two separate but synchronized ultrashort laser pulses, one to generate a probing electron pulse by photoemission at the microscope cathode and the other to excite the specimen into a nonequilibrium state. The state of the specimen within the window of time of the probe pulse can be observed by recording the probe electron packet scattered from the specimen in any of the different working modes of the microscope, such as image and diffraction (10), energy spectrum (11), convergent beam (12), or scanning transmission electron microscopy (TEM) (13). Scanning the time delay between arrival of the pump and probe pulses at the specimen, which is controlled by a precise optical delay line, allows the evolution of the specimen to be traced.One of the important techniques developed in, and unique to, UEM is photon-induced near-field electron microscopy (PINEM) (14). PINEM has extended the capability of UEM to observation of light–electron interactions near nanostructures or at an interface, which offers exciting prospects for the study of dynamics of photonics and plasmonics at the nanometer scale (15). The three-body interaction of photon, electron, and nanostructure relaxes momentum conservation and leads to efficient coupling between photons and electrons (16). In PINEM, an ultrashort optical pulse is used to excite evanescent electromagnetic fields near a nanostructure or at an interface. When the probe electron packet is in spatiotemporal overlap with these evanescent or scatter fields, some of its electrons can absorb/emit one or more scattered photons and then be detected by their contributions to displaced energy peaks in the electron energy spectrum. These displaced peaks appear as discrete sidebands to the zero-loss peak at separations given by the photon energy (hν) of the pump optical pulse. When using energy filtering to select for imaging only those electrons gaining energy, the resulting PINEM image reflects the strength and topology of the excited near field around the nanostructure or interface.The PINEM technique has been used to detect the evanescent near field surrounding a variety of structures with different materials properties and different geometries, such as carbon nanotubes (14), silver nanowires (14, 17), nanoparticles (16, 18), cells and protein vesicles (19), and several-atoms-thick graphene-layered steps (20). In addition, focused-beam PINEM has been used in scanning TEM mode to obtain induced near-field distributions for a copper grid bar (21), a nanometer gold tip (22), and a silver nanoparticle at the subparticle level (21). In a recent publication, three pulses, two optical and one electron, were introduced into the arsenal of techniques to gate the electron pulse and make its width only limited by the optical-pulse durations (23). Numerous general theoretical treatments (24–28) have successfully described the phenomenon, with detailed treatments quantitatively reproducing many unique features of these multifaceted experimental observations (17, 20–22).Despite the growing body of PINEM studies, almost all previously published PINEM results were obtained in the image mode of the electron microscope using optical pulses with wavelengths of 500–800 nm. An exception is a single unresolved PINEM spectrum for 1,038-nm excitation published from this laboratory (25). Because the PINEM response of a material is governed by its optical properties and dimensions relative to the wavelength of light, excitation wavelength is an important parameter largely remaining to be explored experimentally.Here we report the development of IR PINEM using excitation at the wavelength of 1,038 nm (photon energy 1.2 eV). The spatial- and fluence-dependent behavior of well-resolved IR PINEM induced at the edge of a copper grid bar is examined by combining nanometer-scale convergent-beam electron diffraction and diffraction-mode detection for electron-energy spectroscopy with an unprecedented energy resolution down to 0.63 eV at 200 keV. Different e-beam size effects were compared for PINEM generated by green and IR pump pulses. The spatial dependence of IR PINEM at the interface was studied at low-pulse fluence (linear regime) and high-pulse fluence (nonlinear regime). Diffraction of a gold crystal film was observed using the energy-resolved PINEM electrons produced by interaction with the scatter field of the adjacent copper grid edge. Notably, substantial PINEM peak amplitudes were achievable at dramatically lower fluence for IR pulses than for green pulses, opening up a possible path for studies of photosensitive materials. This general accessibility of strong PINEM signals is of particular importance for our primary interest of ultrafast dynamics, for which PINEM photon gating has the potential to vastly improve temporal resolution.All PINEM experiments reported here were performed on the California Institute of Technology UEM-2 apparatus. The operation voltage on UEM-2 is 200 keV. The laser system used emits a train of ∼220-fs pulses with wavelength of 1,038 nm, set to operate at a repetition rate of 1 MHz. The laser output was frequency-doubled two successive times to provide the 259-nm pulses used to generate the electron packet (probe beam) at the 200-keV microscope photocathode source. The residual 1,038-nm and 519-nm optical pulses were each available for use as the PINEM pump beam to excite the near-field plasmons at the interface. All of the experiments were carried out with polarization set to be perpendicular to the interface and in the single-electron regime (8) to eliminate space-charge effects. In diffraction mode, a camera length of 920 mm and a spectrometer entrance aperture of 1 mm were used to obtain a small collection angle for better energy resolution.     

Backward Flux Re-Deposition Patterns during Multi-Spot Laser Ablation of Stainless Steel with Picosecond and Femtosecond Pulses in Air

We report on novel observations of directed re-deposition of ablation debris during the ultrafast laser micro-structuring of stainless steel in the air with multi-beams in close proximity on the surface. This interesting phenomenon is observed with both 10 ps and 600 fs NIR laser pulses at 5 kHz repetition rate. Ablation spot geometries could be altered with the use of beam splitting optics or a phase-only Spatial Light modulator. At low fluence (F ~ 1.0 J cm⁻²) and pulse exposure of a few hundred pulses, the debris appears as concentrated narrow “filaments” connecting the ablation spots, while at higher fluence, (F ~ 5.0 J cm⁻²) energetic jets of material emanated symmetrically along the axes of symmetry, depositing debris well beyond the typical re-deposition radius with a single spot. Patterns of backward re-deposition of debris to the surface are likely connected with the colliding shock waves and plasma plumes with the ambient air causing stagnation when the spots are in close proximity. The 2D surface debris patterns are indicative of the complex 3D interactions involved over wide timescales during ablation from picoseconds to microseconds.     

Biomechanics of DNA structures visualized by 4D electron microscopy

We present a technique for in situ visualization of the biomechanics of DNA structural networks using 4D electron microscopy. Vibrational oscillations of the DNA structure are excited mechanically through a short burst of substrate vibrations triggered by a laser pulse. Subsequently, the motion is probed with electron pulses to observe the impulse response of the specimen in space and time. From the frequency and amplitude of the observed oscillations, we determine the normal modes and eigenfrequencies of the structures involved. Moreover, by selective “nano-cutting” at a given point in the network, it was possible to obtain Young’s modulus, and hence the stiffness, of the DNA filament at that position. This experimental approach enables nanoscale mechanics studies of macromolecules and should find applications in other domains of biological networks such as origamis.     

Scanning Electron Microscopy with Samples in an Electric Field

The high negative bias of a sample in a scanning electron microscope constitutes the “cathode lens” with a strong electric field just above the sample surface. This mode offers a convenient tool for controlling the landing energy of electrons down to units or even fractions of electronvolts with only slight readjustments of the column. Moreover, the field accelerates and collimates the signal electrons to earthed detectors above and below the sample, thereby assuring high collection efficiency and high amplification of the image signal. One important feature is the ability to acquire the complete emission of the backscattered electrons, including those emitted at high angles with respect to the surface normal. The cathode lens aberrations are proportional to the landing energy of electrons so the spot size becomes nearly constant throughout the full energy scale. At low energies and with their complete angular distribution acquired, the backscattered electron images offer enhanced information about crystalline and electronic structures thanks to contrast mechanisms that are otherwise unavailable. Examples from various areas of materials science are presented.     

Is the breakdown of the born-oppenheimer approximation responsible for internal conversion in large molecules?

Vibronic radiationless transitions in large polyatomic molecules can be thought of as a process whereby the molecule, initially prepared in a discrete quasistationary state, makes a transition to an adjoining vibronic continuum belonging to a lower electronic state of the same multiplicity. In many instances the transition is analogous to penetration through a barrier between two „nested” potential sheets far away from an actual intersection of the sheets. Simultaneous distortions of vibrational and electronic parts of the wavefunction are required for such a tunneling process. The vibrational distortion manifests itself in the familiar Franck-Condon effect. The electronic distortion can be caused by nontotally symmetric vibrations of the molecule either because of the displaced nuclear configuration, to which the electrons instantly respond (Herzberg-Teller effect), or because of the protracted response of the electrons to the kinetic energy of nuclear motion (nonadiabatic effect or the breakdown of the Born-Oppenheimer approximation). It is found here that Herzberg-Teller coupling is more effective in causing radiationless transitions than the breakdown of the Born-Oppenheimer approximation when the potential surfaces involved are not close to an intersection.     

Strong-field control and spectroscopy of attosecond electron-hole dynamics in molecules

Molecular structures, dynamics and chemical properties are determined by shared electrons in valence shells. We show how one can selectively remove a valence electron from either Π vs. Σ or bonding vs. nonbonding orbital by applying an intense infrared laser field to an ensemble of aligned molecules. In molecules, such ionization often induces multielectron dynamics on the attosecond time scale. Ionizing laser field also allows one to record and reconstruct these dynamics with attosecond temporal and sub-Ångstrom spatial resolution. Reconstruction relies on monitoring and controlling high-frequency emission produced when the liberated electron recombines with the valence shell hole created by ionization.     

A new labor theory of value for rational planning through use of the bourgeois profit rate

To maximaze steady-state per capita consumptions, goods should be valued at their “synchronized labor requirement costs”, which are shown to deviate from Marx's schemata of “values” but to coincide with bourgeois prices calculated at dated labor requirements, marked-up by compound interest, at a profit or interest rate equal to the system's rate of exponential growth. With capitalists saving all their incomes for future profits, workers get all there is to get. Departures from such an exogenous, or endogenous, golden-rule state are the rule in history rather than the exception. In the case of exponential labor-augmenting change, it is shown that competitive prices will equal historically embodied labor content.