Visible light crosslinkable chitosan hydrogels for tissue engineering

In situ gelling constructs, which form a hydrogel at the site of injection, offer the advantage of delivering cells and growth factors to the complex structure of the defect area for tissue engineering. In the present study, visible light crosslinkable hydrogel systems were presented using methacrylated glycol chitosan (MeGC) and three blue light initiators: camphorquinone (CQ), fluorescein (FR) and riboflavin (RF). A minimal irradiation time of 120 s was required to produce MeGC gels able to encapsulate cells with CQ or FR. Although prolonged irradiation up to 600 s improved the mechanical strength of CQ- or FR-initiated gels (compressive modulus 2.8 or 4.4 kPa, respectively), these conditions drastically reduced encapsulated chondrocyte viability to 5% and 25% for CQ and FR, respectively. Stable gels with 80-90% cell viability could be constructed using radiofrequency (RF) with only 40s irradiation time. Increasing irradiation time up to 300s significantly improved the compressive modulus of the RF-initiated MeGC gels up to 8.5 kPa without reducing cell viability. The swelling ratio and degradation rate were smaller at higher irradiation time. RF-photoinitiated hydrogels supported proliferation of encapsulated chondrocytes and extracellular matrix deposition. The feasibility of this photoinitiating system as in situ gelling hydrogels was further demonstrated in osteochondral and chondral defect models for potential cartilage tissue engineering. The MeGC hydrogels using RF offer a promising photoinitiating system in tissue engineering applications.     

Semi-interpenetrating networks of hyaluronic acid in degradable PEG hydrogels for cartilage tissue engineering

Hydrolytically biodegradable poly(ethylene glycol) (PEG) hydrogels offer a promising platform for chondrocyte encapsulation and tuning degradation for cartilage tissue engineering, but offer no bioactive cues to encapsulated cells. This study tests the hypothesis that a semi-interpenetrating network of entrapped hyaluronic acid (HA), a bioactive molecule that binds cell surface receptors on chondrocytes, and crosslinked degradable PEG improves matrix synthesis by encapsulated chondrocytes. Degradation was achieved by incorporating oligo (lactic acid) segments into the crosslinks. The effects of HA molecular weight (MW) (2.9 × 10⁴ and 2 × 10⁶ Da) and concentration (0.5 and 5 mg g⁻¹) were investigated. Bovine chondrocytes were encapsulated in semi-interpenetrating networks and cultured for 4 weeks. A steady release of HA was observed over the course of the study with 90% released by 4 weeks. Incorporation of HA led to significantly higher cell numbers throughout the culture period. After 8 days, HA increased collagen content per cell, increased aggrecan-positive cells, while decreasing the deposition of hypertrophic collagen X, but these effects were not sustained long term. Measuring total sulfated glycosaminoglycan (sGAG) and collagen content within the constructs and released to the culture medium after 4 weeks revealed that total matrix synthesis was elevated by high concentrations of HA, indicating that HA stimulated matrix production although this matrix was not retained within the hydrogels. Matrix-degrading enzymes were elevated in the low-, but not the high-MW HA. Overall, incorporating high-MW HA into degrading hydrogels increased chondrocyte number and sGAG and collagen production, warranting further investigations to improve retention of newly synthesized matrix molecules.     

Synthesis and characterization of hyaluronic acid–poly(ethylene glycol) hydrogels via Michael addition: An injectable biomaterial for cartilage repair

Injectable hydrogels based on hyaluronic acid (HA) and poly(ethylene glycol) (PEG) were designed as biodegradable matrices for cartilage tissue engineering. Solutions of HA conjugates containing thiol functional groups (HA-SH) and PEG vinylsulfone (PEG-VS) macromers were cross-linked via Michael addition to form a three-dimensional network under physiological conditions. Gelation times varied from 14 min to less than 1 min, depending on the molecular weights of HA-SH and PEG-VS, degree of substitution (DS) of HA-SH and total polymer concentration. When the polymer concentration was increased from 2% to 6% (w/v) in the presence of 100 U ml^?1 hyaluronidase the degradation time increased from 3 to 15 days. Hydrogels with a homogeneous distribution of cells were obtained when chondrocytes were mixed with the precursor solutions. Culturing cell–hydrogel constructs prepared from HA185k-SH with a DS of 28 and cross-linked with PEG5k-4VS for 3 weeks in vitro revealed that the cells were viable and that cell division took place. Gel–cell matrices degraded in approximately 3 weeks, as shown by a significant decrease in dry gel mass. At day 21 glycosaminoglycans and collagen type II were found to have accumulated in hydrogels. These results indicate that these injectable hydrogels have a high potential for cartilage tissue engineering.     

In vitro engineered cartilage using synovium-derived mesenchymal stem cells with injectable gellan hydrogels

Synovium-derived mesenchymal stem cells (SMSC), a novel line of stem cells, are regarded as a promising cell source for cartilage tissue engineering. The goal of this study was to investigate rabbit SMSC coupled with injectable gellan hydrogels for in vitro engineered cartilage. SMSC were isolated from rabbit synovial tissue, amplified to passage 4 in monolayer, and encapsulated in injectable gellan hydrogels, constructs of which were cultured in chondrogenic medium supplemented with TGF-β1, TGF-β3 or BMP-2 for up to 42 days. The quality of the constructs was assessed in terms of cell proliferation and chondrocytic gene/protein expression using WST-1 assay, real-time RT-PCR, biochemical analysis, histology and immunohistochemical analysis. Results indicate that the viability of SMSC in hydrogels treated with TGF-β1, TGF-β3 and BMP-2 remained high at culture time. The constructs formed cartilaginous tissue with the expression of chondrocytic genes (collagen type II, aggrecan, biglycan, SOX 9) and cartilaginous matrix (sulphated glycosaminoglycan and collagen) as early as 21 days in culture. Both TGF-β1 and TGF-β3 treated SMSC-laden hydrogels showed more chondrogenesis compared with BMP-2 treated SMSC-laden hydrogels. It demonstrates that injectable SMSC-laden gels, when treated with TGF-β1, TGF-β3 or BMP-2, are highly competent for in vitro engineered cartilage formation, which lays a foundation for their potential application in clinical cartilage repair.     

Differential effect of hypoxia on human mesenchymal stem cell chondrogenesis and hypertrophy in hyaluronic acid hydrogels

Photocrosslinked hyaluronic acid (HA) hydrogels provide a conducive 3-D environment that supports the chondrogenesis of human mesenchymal stem cells (hMSCs). The HA macromer concentration in the hydrogels has a significant impact on the chondrogenesis of the encapsulated MSCs due to changes in the physical properties of the hydrogels. Meanwhile, hypoxia has been shown to promote MSC chondrogenesis and suppress subsequent hypertrophy. This study investigates the combinatorial effect of tuning HA macromer concentration (1.5–5% w/v) and hypoxia on MSC chondrogenesis and hypertrophy. To decouple the effect of HA concentration from that of crosslinking density, the HA hydrogel crosslinking density was adjusted by varying the extent of the reaction through the light exposure time while keeping the HA concentration constant (5% w/v at 5 or 15 min). It was found that hypoxia had no significant effect on the chondrogenesis and cartilaginous matrix synthesis of hMSCs under all hydrogel conditions. In contrast, the hypoxia-mediated positive or negative regulation of hMSC hypertrophy in HA hydrogels is dependent on the HA concentration but independent of the crosslinking density. Specifically, hypoxia significantly suppressed hMSC hypertrophy and neocartilage calcification in low HA concentration hydrogels, whereas hypoxia substantially enhanced hMSC hypertrophy, leading to elevated tissue calcification in high HA concentration hydrogels irrespective of their crosslinking density. In addition, at a constant high HA concentration, increasing hydrogel crosslinking density promoted hMSC hypertrophy and matrix calcification. To conclude, the findings from this study demonstrate that the effect of hypoxia on hMSC chondrogenesis and hypertrophy is differentially influenced by the encapsulating HA hydrogel properties.     

Introducing chemical functionality in Fmoc-peptide gels for cell culture

Aromatic short peptide derivatives, i.e. peptides modified with aromatic groups such as 9-fluorenylmethoxycarbonyl (Fmoc), can self-assemble into self-supporting hydrogels. These hydrogels have some similarities to extracellular matrices due to their high hydration, relative stiffness and nanofibrous architecture. We previously demonstrated that Fmoc-diphenylalanine (Fmoc-F₂) provides a suitable matrix for two-dimensional (2D) or three-dimensional (3D) culture of primary bovine chondrocytes. In this paper we investigate whether the introduction of chemical functionality, such as NH₂, COOH or OH, enhances compatibility with different cell types. A series of hydrogel compositions consisting of combinations of Fmoc-F₂ and n-protected Fmoc amino acids, lysine (K, with side chain R = (CH₂)₄NH₂), glutamic acid (D, with side chain R = CH₂COOH), and serine (S, with side chain R = CH₂OH) were studied. All compositions produced fibrous scaffolds with fibre diameters in the range of 32–65 nm as assessed by cryo-scanning electron microscopy and atomic force microscopy. Fourier transform infrared spectroscopy analysis suggested that peptide segments adopt a predominantly antiparallel β-sheet conformation. Oscillatory rheology results show that all four hydrogels have mechanical profiles of soft viscoelastic materials with elastic moduli dependent on the chemical composition, ranging from 502 Pa (Fmoc-F₂/D) to 21.2 KPa (Fmoc-F₂). All gels supported the viability of bovine chondrocytes as assessed by a live–dead staining assay. Fmoc-F₂/S and Fmoc-F₂/D hydrogels in addition supported viability for human dermal fibroblasts (HDF) while Fmoc-F₂/S hydrogel was the only gel type that supported viability for all three cell types tested. Fmoc-F₂/S was therefore investigated further by studying cell proliferation, cytoskeletal organization and histological analysis in 2D culture. In addition, the Fmoc-F₂/S gel was shown to support retention of cell morphology in 3D culture of bovine chondrocytes. These results demonstrate that introduction of chemical functionality into Fmoc-peptide scaffolds may provide gels with tunable chemical and mechanical properties for in vitro cell culture.     

Cartilaginous constructs using primary chondrocytes from continuous expansion culture seeded in dense collagen gels

Cell-based therapies such as autologous chondrocyte implantation require in vitro cell expansion. However, standard culture techniques require cell passaging, leading to dedifferentiation into a fibroblast-like cell type. Primary chondrocytes grown on continuously expanding culture dishes (CE culture) limits passaging and protects against dedifferentiation. The authors tested whether CE culture chondrocytes were advantageous for producing mechanically competent cartilage matrix when three-dimensionally seeded in dense collagen gels. Primary chondrocytes, grown either in CE culture or passaged twice on static silicone dishes (SS culture; comparable to standard methods), were seeded in dense collagen gels and cultured for 3 weeks in the absence of exogenous chondrogenic growth factors. Compared with gels seeded with SS culture chondrocytes, CE chondrocyte-seeded gels had significantly higher chondrogenic gene expression after 2 and 3 weeks in culture, correlating with significantly higher aggrecan and type II collagen protein accumulation. There was no obvious difference in glycosaminoglycan content from either culture condition, yet CE chondrocyte-seeded gels were significantly thicker and had a significantly higher dynamic compressive modulus than SS chondrocyte-seeded gels after 3 weeks. Chondrocytes grown in CE culture and seeded in dense collagen gels produce more cartilaginous matrix with superior mechanical properties, making them more suitable than SS cultured cells for tissue engineering applications.     

A temperature-cured dissolvable gelatin microsphere-based cell carrier for chondrocyte delivery in a hydrogel scaffolding system

In this study, a novel therapeutic cell delivery methodology in the form of hydrogel encapsulating cell-laden microspheres was developed and investigated. As a model cell for cartilage tissue engineering, chondrocytes were successfully encapsulated in gelatin-based microspheres (mostly of diameter 50–100 μm, centred at 75–100 μm) with high cell viability during the formation of microspheres via a water-in-oil single emulsion process under a low temperature without any chemical treatment. These cell-laden microspheres were then encapsulated in alginate-based hydrogel constructs. By elevating the temperature to 37 °C, the cell-laden microspheres were completely dissolved within 2 days, resulting in the same number of same-sized spherical cavities in hydrogel bulk, along with which the encapsulated cells were released from the microspheres and suspended inside the cavities to be cultivated for further development. In this cell delivery system, the microspheres played a dual role as both removable cell vehicles and porogens for creation of the intra-hydrogel cavities, in which the delivered cells were provided with both free living spaces and a better permeable environment. This temperature-cured dissolvable gelatin microsphere-based cell carrier (tDGMC) associating with cell-laden hydrogel scaffold was attempted and evaluated through WST-1, quantitative polymerase chain reaction, biochemical assays and various immunohistochemistry and histology stains. The results indicate that tDGMC technology can facilitate the delivery of chondrocytes, as a non-anchorage-dependent therapeutic cell, with significantly greater efficiency.     

Cell–matrix interactions and dynamic mechanical loading influence chondrocyte gene expression and bioactivity in PEG-RGD hydrogels

The pericellular matrix (PCM) surrounding chondrocytes is thought to play an important role in transmitting biochemical and biomechanical signals to the cells, which regulates many cellular functions including tissue homeostasis. To better understand chondrocytes interactions with their PCM, three-dimensional poly(ethylene glycol) (PEG) hydrogels containing Arg–Gly–Asp (RGD), the cell-adhesion sequence found in fibronectin and which is present in the PCM of cartilage, were employed. RGD was incorporated into PEG hydrogels via tethers at 0.1, 0.4 and 0.8 mM concentrations. Bovine chondrocytes were encapsulated in the hydrogels and subjected to dynamic compressive strains (0.3 Hz, 18% amplitude strain) for 48 h, and their response assessed by cell morphology, ECM gene expression, cell proliferation and matrix synthesis. Incorporation of RGD did not influence cell morphology under free swelling conditions. However, the level of cell deformation upon an applied strain was greater in the presence of RGD. In the absence of dynamic loading, RGD appears to have a negative effect on chondrocyte phenotype, as seen by a 4.7-fold decrease in collagen II/collagen I expressions in 0.8 mM RGD constructs. However, RGD had little effect on early responses of chondrocytes (i.e. cell proliferation and matrix synthesis/deposition). When isolating RGD as a biomechanical cue, cellular response was very different. Chondrocyte phenotype (collagen II/collagen I ratio) and proteoglycan synthesis were enhanced with higher concentrations of RGD. Overall, our findings demonstrate that RGD ligands enhance cartilage-specific gene expression and matrix synthesis, but only when mechanically stimulated, suggesting that cell–matrix interactions mediate chondrocyte response to mechanical stimulation.     

Development of photocrosslinked methylcellulose hydrogels for soft tissue reconstruction

A variety of materials have been used as fillers for soft tissue augmentation. In this study, methylcellulose (MC), a water-soluble derivative of the polysaccharide cellulose, was modified with functional methacrylate groups and photocrosslinked to produce hydrogels for potential application in plastic and reconstructive surgery. Purified macromer (5% theoretical modification, 2.3% actual) was resuspended in 0.05 wt.% of the photoinitiator, 2-methyl-1-[4-(hydroxyethoxy)phenyl]-2-methyl-1-propanone, cast into custom molds, and exposed to long-wavelength UV light for 10 min to form gels. Photocrosslinked MC hydrogels at varying weight/volume percentages displayed equilibrium weight swelling ratios (wet weight/dry weight) and elastic moduli of 30 ± 3 to 17 ± 2 and 8.48 ± 0.25 kPa to 23.21 ± 1.55 kPa, respectively, demonstrating the formation of stable gels with tunable properties. Human dermal fibroblasts grown in the presence of MC hydrogels in vitro exhibited no significant changes in cell viability after 5 days of co-culture, indicating that the materials are non-cytotoxic. Higher weight percentage MC hydrogels (6%) implanted subcutaneously in CD-1 mice maintained their integrity and original dimensions after 80 days in vivo, eliciting a mild inflammatory response with no observed inflammatory exudate, minimal vascular infiltration and thin translucent fibrous capsule formation of approximately 50 μm in thickness. Taken together, the material and biological properties of photocrosslinked MC hydrogels suggest that they may be of use in soft tissue reconstruction.     

Human umbilical cord stem cell encapsulation in novel macroporous and injectable fibrin for muscle tissue engineering

There has been little research on the seeding of human umbilical cord mesenchymal stem cells (hUCMSCs) in three-dimensional scaffolds for muscle tissue engineering. The objectives of this study were: (i) to seed hUCMSCs in a fibrin hydrogel containing fast-degradable microbeads (dMBs) to create macropores to enhance cell viability; and (ii) to investigate the encapsulated cell proliferation and myogenic differentiation for muscle tissue engineering. Mass fractions of 0–80% of dMBs were tested, and 35% of dMBs in fibrin was shown to avoid fibrin shrinkage while creating macropores and promoting cell viability. This construct was referred to as “dMB35”. Fibrin without dMBs was termed “dMB0”. Microbead degradation created macropores in fibrin and improved cell viability. The percentage of live cells in dMB35 reached 91% at 16 days, higher than the 81% in dMB0 (p < 0.05). Live cell density in dMB35 was 1.6-fold that of dMB0 (p < 0.05). The encapsulated hUCMSCs proliferated, increasing the cell density by 2.6 times in dMB35 from 1 to 16 days. MTT activity for dMB35 was substantially higher than that for dMB0 at 16 days (p < 0.05). hUCMSCs in dMB35 had high gene expressions of myotube markers of myosin heavy chain 1 (MYH1) and alpha-actinin 3 (ACTN3). Elongated, multinucleated cells were formed with positive staining of myogenic specific proteins including myogenin, MYH, ACTN and actin alpha 1. Moreover, a significant increase in cell fusion was detected with myogenic induction. In conclusion, hUCMSCs were encapsulated in fibrin with degradable microbeads for the first time, achieving greatly enhanced cell viability and successful myogenic differentiation with formation of multinucleated myotubes. The injectable and macroporous fibrin–dMB–hUCMSC construct may be promising for muscle tissue engineering applications.     

Cryopreservation effects on recombinant myoblasts encapsulated in adhesive alginate hydrogels

Cell encapsulation in hydrogels is widely used in tissue engineering applications, including encapsulation of islets or other insulin-secreting cells in pancreatic substitutes. Use of adhesive, biofunctionalized hydrogels is receiving increasing attention as cell–matrix interactions in three-dimensional (3-D) environments can be important for various cell processes. With pancreatic substitutes, studies have indicated benefits of 3-D adhesion on the viability and/or function of insulin-secreting cells. As long-term storage of microencapsulated cells is critical for their clinical translation, cryopreservation of cells in hydrogels is being actively investigated. Previous studies have examined the cryopreservation response of cells encapsulated in non-adhesive hydrogels using conventional freezing and/or vitrification (ice-free cryopreservation); however, none have systematically compared the two cryopreservation methods with cells encapsulated within an adhesive 3-D environment. The latter would be significant, as evidence suggests adhesion influences the cellular response to cryopreservation. Thus, the objective of this study was to determine the response to conventional freezing and vitrification of insulin-secreting cells encapsulated in an adhesive biomimetic hydrogel. Recombinant insulin-secreting C2C12 myoblasts were encapsulated in oxidized RGD–alginate and cultured for 1 or 4 days post-encapsulation, cryopreserved, and assessed up to 3 days post-warming for metabolic activity and insulin secretion, and 1 day post-warming for cell morphology. Besides certain transient differences in the vitrified group relative to the fresh control, both conventional freezing and vitrification maintained the metabolism, secretory activity, and morphology of the recombinant C2C12 cells. Thus, due to a simpler procedure and slightly superior results, conventional freezing is recommended over vitrification for the cryopreservation of C2C12 cells encapsulated in oxidized, RGD-modified alginate.     

Self-crosslinked oxidized alginate/gelatin hydrogel as injectable,adhesive biomimetic scaffolds for cartilage regeneration

Biopolymeric hydrogels that mimic the properties of extracellular matrix have great potential in promoting cellular migration and proliferation for tissue regeneration. The authors reported earlier that rapidly gelling, biodegradable, injectable hydrogels can be prepared by self-crosslinking of periodate oxidized alginate and gelatin in the presence of borax, without using any toxic crosslinking agents. The present paper investigates the suitability of this hydrogel as a minimally invasive injectable, cell-attractive and adhesive scaffold for cartilage tissue engineering for the treatment of osteoarthritis. Time and frequency sweep rheology analysis confirmed gel formation within 20 s. The hydrogel integrated well with the cartilage tissue, with a burst pressure of 70 ± 3 mmHg, indicating its adhesive nature. Hydrogel induced negligible inflammatory and oxidative stress responses, a prerequisite for the management and treatment of osteoarthritis. Scanning electron microscopy images of primary murine chondrocytes encapsulated within the matrix revealed attachment of cells onto the hydrogel matrix. Chondrocytes demonstrated viability, proliferation and migration within the matrix, while maintaining their phenotype, as seen by expression of collagen type II and aggrecan, and functionality, as seen by enhanced glycosoaminoglycan (GAG) deposition with time. DNA content and GAG deposition of chondrocytes within the matrix can be tuned by incorporation of bioactive signaling molecules such as dexamethasone, chondroitin sulphate, platelet derived growth factor (PDGF-BB) and combination of these three agents. The results suggest that self-crosslinked oxidized alginate/gelatin hydrogel may be a promising injectable, cell-attracting adhesive matrix for neo-cartilage formation in the management and treatment of osteoarthritis.     

The influence of degradation characteristics of hyaluronic acid hydrogels on in vitro neocartilage formation by mesenchymal stem cells

The potential of mesenchymal stem cells (MSCs) as a viable cell source for cartilage repair hinges on the development of engineered scaffolds that support adequate cartilage tissue formation. Evolving networks (hydrogels with mesh sizes that change over time due to crosslink degradation) may provide the control needed to enhance overall tissue formation when compared to static scaffolds. In this study, MSCs were photoencapsulated in combinations of hydrolytically and enzymatically degradable hyaluronic acid (HA) hydrogels to investigate the tunability of these hydrogels and the influence of network evolution on neocartilage formation. In MSC-laden HA hydrogels, compressive mechanical properties increased when degradation complemented extracellular matrix deposition and decreased when degradation was too rapid. In addition, dynamic hydrogels that started at a higher wt% and decreased to a lower wt% were not equivalent to static hydrogels that started at the higher or lower wt%. Specifically, evolving 2 wt% hydrogels (2 wt% degrading to 1 wt%) expressed up-regulation of type II collagen and aggrecan, and exhibited increased glycosaminoglycan content over non-evolving 2 and 1 wt% hydrogels. Likewise, mechanical properties and size maintenance were superior in the dynamic system compared to the static 2 wt% and 1 wt% hydrogels, respectively. Thus, hydrogels with dynamic properties may improve engineered tissues and help translate tissue engineering technology to clinical application.     

Predicting bulk mechanical properties of cellularized collagen gels using multiphoton microscopy

Cellularized collagen gels are a common model in tissue engineering, but the relationship between the microstructure and bulk mechanical properties is only partially understood. Multiphoton microscopy (MPM) is an ideal non-invasive tool for examining collagen microstructure, cellularity and crosslink content in these gels. In order to identify robust image parameters that characterize microstructural determinants of the bulk elastic modulus, we performed serial MPM and mechanical tests on acellular and cellularized (normal human lung fibroblasts) collagen hydrogels, before and after glutaraldehyde crosslinking. Following gel contraction over 16 days, cellularized collagen gel content approached that of native connective tissues (～200 mg ml^–1). Young’s modulus (E) measurements from acellular collagen gels (range 0.5–12 kPa) exhibited a power-law concentration dependence (range 3–9 mg ml^–1) with exponents from 2.1 to 2.2, similar to other semiflexible biopolymer networks such as fibrin and actin. In contrast, cellularized collagen gel stiffness (range 0.5–27 kPa) produced concentration-dependent exponents of 0.7 uncrosslinked and 1.1 crosslinked (range ～5–200 mg ml^–1). The variation in E of cellularized collagen hydrogels can be explained by a power-law dependence on robust image parameters: either the second harmonic generation (SHG) and two-photon fluorescence (TPF) (matrix component) skewness (R² = 0.75, exponents of -1.0 and -0.6, respectively); or alternatively the SHG and TPF (matrix component) speckle contrast (R² = 0.83, exponents of ?0.7 and ?1.8, respectively). Image parameters based on the cellular component of TPF signal did not improve the fits. The concentration dependence of E suggests enhanced stress relaxation in cellularized vs. acellular gels. SHG and TPF image skewness and speckle contrast from cellularized collagen gels can predict E by capturing mechanically relevant information on collagen fiber, cell and crosslink density.     

Three-dimensional hypoxic culture of human mesenchymal stem cells encapsulated in a photocurable,biodegradable polymer hydrogel: A potential injectable cellular product for nucleus pulposus regeneration

Nucleus pulposus (NP) tissue damage can induce detrimental mechanical stresses and strains on the intervertebral disc, leading to disc degeneration. This study demonstrates the potential of a novel, photo-curable, injectable, synthetic polymer hydrogel (pHEMA-co-APMA grafted with polyamidoamine (PAA)) to encapsulate and differentiate human mesenchymal stem cells (hMSC) towards a NP phenotype under hypoxic conditions which could be used to restore NP tissue function and mechanical properties. Encapsulated hMSC cultured in media (hMSC and chondrogenic) displayed good cell viability up to day 14. The genotoxicity effects of ultraviolet (UV) on hMSC activity confirmed the acceptability of 2.5 min of UV light exposure to cells. Cytotoxicity investigations revealed that hMSC cultured in media containing p(HEMA-co-APMA) grafted with PAA degradation product (10% and 20% v/v concentration) for 14 days significantly decreased the initial hMSC adhesion ability and proliferation rate from 24 hrs to day 14. Successful differentiation of encapsulated hMSC within hydrogels towards chondrogenesis was observed with elevated expression levels of aggrecan and collagen II when cultured in chondrogenic media under hypoxic conditions, in comparison with culture in hMSC media for 14 days. Characterization of the mechanical properties revealed a significant decrease in stiffness and modulus values of cellular hydrogels in comparison with acellular hydrogels at both day 7 and day 14. These results demonstrate the potential use of an in vivo photo-curable injectable, synthetic hydrogel with encapsulated hMSC for application in the repair and regeneration of NP tissue.     

Effects of hydroxyapatite on endothelial network formation in collagen/fibrin composite hydrogels in vitro and in vivo

Co-culture of endothelial cells (EC) and mesenchymal stem cells (MSC) results in robust vascular network formation in constrained 3-D collagen/fibrin (COL/FIB) composite hydrogels. However, the ability to form endothelial networks is lost when such gels are allowed to compact via cell-mediated remodeling. In this study, we created co-cultures of human EC and human MSC in both constrained and unconstrained COL/FIB matrices and systematically added nanoparticulate hydroxyapatite (HA, 0–20 mg ml⁻¹), a bone-like mineral that has been shown to have pro-vasculogenic effects. Constructs cultured for 7 days were assayed for gel compaction, vascular network formation, and mechanical properties. In vitro, robust endothelial network formation was observed in constrained COL/FIB constructs without HA, but this response was significantly inhibited by addition of 5, 10, or 20 mg ml⁻¹ HA. In unconstrained matrices, network formation was abolished in pure COL/FIB constructs but was rescued by 1.25 or 2.5 mg ml⁻¹ HA, while higher levels again inhibited vasculogenesis. HA inhibited gel compaction in a dose-dependent manner, which was not correlated to endothelial network formation. HA affected initial stiffness of the gels, but gel remodeling abrogated this effect. Subcutaneous implantation of COL/FIB with 0, 2.5 or 20 mg ml⁻¹ HA in the mouse resulted in increased perfusion at the implant site, with no significant differences between materials. Histology at day 7 showed both host and human CD31-stained vasculature infiltrating the implants. These findings are relevant to the design of materials and scaffolds for orthopedic tissue engineering, where both vasculogenesis and formation of a mineral phase are required for regeneration.     

Four-arm PEG cross-linked hyaluronic acid hydrogels containing PEGylated apoptotic TRAIL protein for treating pancreatic cancer

Four-arm polyethylene glycol (PEG) cross-linked hyaluronic acid (HA) hydrogels containing PEGylated tumor necrosis factor-related apoptosis-inducing ligand (PEG-TRAIL) were fabricated, and their antitumor effects were evaluated in pancreatic cell (Mia Paca-2)-xenografted mice. HA was conjugated with 4-arm PEG_10k-amine (a cross-linker) at ratios of 100:1 and 100:2 using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride as a cross-linker, and TRAIL or PEG-TRAIL was incorporated into these HA hydrogels. HA hydrogels at a 100:1 ratio were prepared in good yields (>88%), were moderately stiff, and gradually released PEG-TRAIL over ∼14 days in vitro and over ∼7 days in vivo (as determined by high-pressure liquid chromatography and infrared imaging). The released PEG-TRAIL was found to have obvious apoptotic activity in Mia Paca-2 cells. PEG-TRAIL HA hydrogels displayed remarkably more antitumor efficacy than TRAIL HA hydrogels in Mia Paca-2 cell-xenografted mice in terms of tumor volumes (size) and weights (453.2 mm³ and 1.03 g vs. 867.5 mm³ and 1.86 g). Furthermore, this improved antitumor efficacy was found to be due to the apoptotic activity of PEG-TRAIL in vivo (determined by a TUNEL assay) despite its substantially lower cytotoxicity than native TRAIL (IC₅₀ values: 71.8 and 202.5 ng ml⁻¹, respectively). This overall enhanced antitumor effect of PEG-TRAIL HA hydrogels appeared to be due to the increased stability of PEGylated TRAIL in HA hydrogels. These findings indicate that this HA hydrogel system combined with PEG-TRAIL should be considered a potential candidate for the treatment of pancreatic cancer.     

Characterization of novel photocrosslinked carboxymethylcellulose hydrogels for encapsulation of nucleus pulposus cells

Back pain is a significant clinical concern often associated with degeneration of the intervertebral disc (IVD). Tissue engineering strategies may provide a viable IVD replacement therapy; however, an ideal biomaterial scaffold has yet to be identified. One candidate material is carboxymethylcellulose (CMC), a water-soluble derivative of cellulose. In this study, 90 and 250 kDa CMC polymers were modified with functional methacrylate groups and photocrosslinked to produce hydrogels at different macromer concentrations. At 7 days, bovine nucleus pulposus (NP) cells encapsulated in these hydrogels were viable, with values for the elastic modulus ranging from 1.07 ± 0.06 to 4.29 ± 1.25 kPa. Three specific formulations were chosen for further study based on cell viability and mechanical integrity assessments: 4% 90 kDa, 2% 250 kDa and 3% 250 kDa CMC. The equilibrium weight swelling ratio of these formulations remained steady throughout the 2 week study (46.45 ± 3.14, 48.55 ± 2.91 and 42.41 ± 3.06, respectively). The equilibrium Young’s modulus of all cell-laden and cell-free control samples decreased over time, with the exception of cell-laden 3% 250 kDa CMC constructs, indicating an interplay between limited hydrolysis of interchain crosslinks and the elaboration of a functional matrix. Histological analyses of 3% 250 kDa CMC hydrogels confirmed the presence of rounded cells in lacunae and the pericellular deposition of chondroitin sulfate proteoglycan, a phenotypic NP marker. Taken together, these studies support the use of photocrosslinked CMC hydrogels as tunable biomaterials for NP cell encapsulation.     

Size-controlled insulin-secreting cell clusters

The search for an effective cure for type I diabetes from the transplantation of encapsulated pancreatic β-cell clusters has so far produced sub-optimal clinical outcomes. Previous efforts have not controlled the size of transplanted clusters, a parameter implicated in affecting long-term viability and the secretion of therapeutically sufficient insulin. Here we demonstrate a method based on covalent attachment of patterned laminin for fabricating uniformly size-controlled insulin-secreting cell clusters. We show that cluster size within the range 40–120 μm in diameter affects a variety of therapeutically relevant cellular responses including insulin expression, content and secretion. Our studies elucidate two size-dependent phenomena: (1) as the cluster size increases from 40 μm to 60 μm, glucose stimulation results in a greater amount of insulin produced per cell; and (2) as the cluster size increases beyond 60 μm, sustained glucose stimulation results in a greater amount of insulin secreted per cell. Our study describes a method for producing uniformly sized insulin-secreting cell clusters, and since larger cluster sizes risk nutrient availability limitations, our data suggest that 100–120 μm clusters may provide optimal viability and efficacy for encapsulated β-cell transplants as a treatment for type I diabetes and that further in vivo evaluation is warranted.