Occupational lung diseases and the mining industry in Mongolia

Mining production has accounted for around 50% of the gross industrial product in Mongolia since 1998. Dust-induced chronic bronchitis and pneumoconiosis currently account for the largest relative share (67.8%) of occupational diseases in Mongolia, and cases are increasing annually. In 1967-2004, medically diagnosed cases of occupational diseases in Mongolia numbered 7,600. Of these, 5,154 were confirmed cases of dust-induced chronic bronchitis and pneumoconiosis. Lung diseases and other mining-sector health risks pose major challenges for Mongolia. Gold and coal mines, both formal and informal, contribute significantly to economic growth, but the prevalence of occupational lung diseases is high and access to health care is limited. Rapid implementation of an effective national program of silicosis elimination and pneumoconiosis reduction is critical to ensure the health and safety of workers in this important sector of the Mongolian economy.     

Occupational health and safety in Brazil

BACKGROUND. Brazil is the world's fifth largest and sixth most populous nation. Its economy is varied, with strong manufacturing, agriculture, mining, and service sectors. Therefore, a wide variety of workplace hazards confronts its work force. This paper describes Brazil's occupational safety and health regulatory scheme, workers' compensation system, plant-level practices, training, and data collection. METHODS. We reviewed and analyzed Brazilian regulatory legislation and government and non-governmental organization (NGO) activity in occupational safety and health, as well as the structure and function of the workers' compensation system. We also reviewed available data on injuries and diseases from major sources, including the now-defunct Instituto Nacional do Previdencia Social (INPS) and the workers' compensation scheme, Seguro de Acidente de Trabalho (SAT). RESULTS. The incidence of workplace injuries has decreased in recent years and is now reported to be about 5 per 100 workers per year. The case fatality rate has been constant at about 5 fatalities per 1000 injuries. Less than 6% of reported injuries are classified as "diseases." Brazil's rates are comparable to those of Mexico and Zimbabwe, and two to four times higher than in most industrialized countries. CONCLUSIONS. Brazil has a high incidence of occupational injuries and diseases; these injuries and diseases are underreported; there is a large informal sector at special risk; and Brazil illustrates the disparity that exists in many countries between legislation on the books and legislation that is actually implemented.     

Occupational safety risk management in Australian mining

In the past 15 years, there has been a major safety improvement in the Australian mining industry. Part of this change can be attributed to the development and application of risk assessment methods. These systematic, team-based techniques identify, assess and control unacceptable risks to people, assets, the environment and production. The outcomes have improved mine management systems. This paper discusses the risk assessment approach applied to equipment design and mining operations, as well as the specific risk assessment methodology. The paper also discusses the reactive side of risk management, incident and accident investigation. Systematic analytical methods have also been adopted by regulatory authorities and mining companies to investigate major losses.     

Occupational health and safety in Australia

The focus of OHS in Australia is on workplace-based prevention rather than individual health care. Over the past decade, workers' compensation data have shown continuous improvement in work-related deaths, serious injuries and diseases. Injuries from work-related vehicle incidents are the leading cause of fatalities. There is a high incidence of on-road incidents in light vehicles; this problem is under-recognised, and better incidence data are required to support more effective interventions. Rates of many long-latency diseases such as cancers are underestimated, and again more reliable information is needed, particularly on work-related exposures to carcinogens. Disease-related deaths are largely confined to older workers. Musculoskeletal injuries and disorders are the most frequent and costly OHS problem, constituting a large majority of non-fatal injuries and diseases. There is growing recognition that their risk management should be more evidence based, integrating assessment and control of psychosocial and 'manual handling' hazards. A high rate of population ageing is increasing risk of chronic diseases, including musculoskeletal disorders, which is helping to raise awareness of the importance of protecting and promoting workforce health. Strategies to achieve this have been developed but implementation is at an early stage.     

Occupational health provision and health surveillance in the semiconductor industry

AIMS: To identify the nature of occupational health provision in UK semiconductor-manufacturing plants. To identify the level of industry compliance with legal health surveillance requirements. METHOD: A national inspection programme was carried out by Health & Safety Executive inspectors using a developed protocol. RESULTS: A wide range of occupational health provision was identified from none to use of an accredited specialist. The majority of work was of a reactive nature even where there was specialist occupational health input. Seven companies were identified as not meeting legal compliance and one as having unacceptable compliance for health surveillance. CONCLUSIONS: The spectrum of occupational health provision was very wide. Where health surveillance was provided, it was poorly targeted with limited interpretation and feedback to management.     

Occupational health concerns in the welding industry

The Workplace Safety and Health Branch initiated a proactive study in the welding industry in Manitoba. Eight welding companies participated in this study. Health concerns raised by welders were welders' flash, sore/red/teary eyes, headaches, nosebleeds, and a black mucous discharge from their nasal membrane. Most welders expressed concern regarding excessive smoke levels in the workplace and inadequate ventilation. Types of welding identified were MIG mild steel, MIG stainless steel, and TIG aluminum. Monitoring involved an assessment of noise levels, fume composition, and carbon monoxide and ozone concentrations. Metal analyses were according to National Institute for Occupational Safety and Health (NIOSH) Method 7300. Noise dosimeters used were the Quest model 100 and Micro 14 & 15. Carbon monoxide was monitored using the Gastech Model 4700 and ozone using the AID Portable Ozone Meter Model 560. In Manitoba, a hearing conservation program is required when the equivalent sound exposure level (normalized Lex 8-hr) exceeds 80 dBA-weighted. The American Conference of Governmental Industrial Hygienists' threshold limit value-time weighted average (ACGIH TLV-TWA) for iron is 5.0 mg/m3, manganese is 0.2 mg/m3, carbon monoxide is 25 ppm, and ozone is 0.05 ppm (heavy work), 0.08 ppm (moderate work), and 0.1 ppm (light work). Welders' personal exposures to manganese ranged from 0.01-4.93 mg/m3 (N = 42; AM = 0.5; GM = 0.2; SD +/- 0.9; GSD +/- 3.2) and to iron ranged from 0.04-16.29 mg/m3 (N = 42; AM = 3.0; GM = 1.4; SD +/- 3.5; GSD +/- 2.5). Noise exposures ranged from 79-98 dBA (N = 44; AM = 88.9; GM = 88.8; SD +/- 4.2; GSD +/- 1.0). Carbon monoxide levels were less than 5.0 ppm (at source) and ozone levels varied from 0.4-0.6 ppm (at source). Ventilation upgrades in the workplace were required in most welding shops. Only 7 percent of the welders wore respiratory protection. A hearing conservation program and hearing protection were required at all monitored workplaces.     

Occupational health and safety management systems in the Canadian pulp and paper industry: methods of auditing.

The Canadian Pulp and Paper Association has developed eight "Guiding Principles for Management of Occupational Health and Safety" (OH&S) for its member companies. As part of a study to assess member companies' OH&S activities, an on-site audit was performed for 11 sites. The audit assessed five key components of a management system for a number of OH&S activities. Management-system components more likely to be in place included system ownership and goals and procedures, whereas measures of performance, a review of measures, and corrective action were less likely to be present. Environmental surveillance and injury reduction were most actively monitored, as indicated by the number of measures of performance relating to these activities. The auditing process demonstrated leadership and communicated the OH&S priorities of the Canadian Pulp and Paper Association to the sites.     

Occupational health hazards in mining: an overview

This review article outlines the physical, chemical, biological, ergonomic and psychosocial occupational health hazards of mining and associated metallurgical processes. Mining remains an important industrial sector in many parts of the world and although substantial progress has been made in the control of occupational health hazards, there remains room for further risk reduction. This applies particularly to traumatic injury hazards, ergonomic hazards and noise. Vigilance is also required to ensure exposures to coal dust and crystalline silica remain effectively controlled.     

Occupational health and safety legislation and implementation in China

This article reviews the current statistics of employment and work-related injuries and illness in China, as well as the history of occupational health and safety legislation in the country. Comprehensive, newly promulgated workplace health and safety legislation is described, and the specific responsibilities of employers, government agencies, trade unions, and employees are detailed. The government's implementation plan for this and prior legislation is also outlined.     

印刷行业职业病危害因素及其健康影响

印刷行业分布广泛, 影响人群众多, 健康影响值得关注。从印刷的分类来看, 平版印刷是我国现阶段印刷行业的主流。印刷过程的职业病危害主要来自使用的有机溶剂挥发出来的化学物质和印刷设备产生的噪声等。印刷过程对工人的健康影响也主要为对身体神经系统、心血管系统、消化系统等产生的危害。