Near-Infrared Image-Guided Delivery and Controlled Release Using Optimized Thermosensitive Liposomes

Purpose

To engineer optimized near-infrared (NIR) active thermosensitive liposomes to potentially achieve image-guided delivery of chemotherapeutic agents.

Methods

Thermosensitive liposomes were surface-coated with either polyethylene glycol or dextran. Differential scanning calorimetry and calcein release studies were conducted to optimize liposomal release, and flow cytometry was employed to determine the in vitro macrophage uptake of liposomes. Indocyanine green (ICG) was encapsulated as the NIR dye to evaluate the in vivo biodistribution in tumor-bearing mice.

Results

The optimized thermosensitive liposome formulation consists of DPPC, SoyPC, and cholesterol in the 100:50:30 molar ratio. Liposomes with dextran and polyethylene glycol demonstrated similar thermal release properties; however in vitro macrophage uptake was greater with dextran. Non-invasive in vivo NIR imaging showed tumor accumulation of liposomes with both coatings, and ex vivo NIR imaging correlated well with actual ICG concentrations in various organs of healthy mice.

Conclusions

The optimized thermosensitive liposome formulation demonstrated stability at 37?°C and efficient burst release at 40 and 42?°C. Dextran exhibited potential for application as a surface coating in thermosensitive liposome formulations. In vivo studies suggest that liposomal encapsulation of ICG permits reliable, real-time monitoring of liposome biodistribution through non-invasive NIR imaging.     

Spray-Dried Chitosan Microparticles for Cellular Delivery of an Antigenic Protein: Physico-chemical Properties and Cellular Uptake by Dendritic Cells and Macrophages

Purpose

Spray-dried chitosan microparticles for cellular delivery of antigen to dendritic cells (DC) and macrophages (M?) were investigated.

Methods

Chitosan microparticles were prepared by spray drying. For comparison, poly(lactic-co-glycolic acid) (PLGA) and poly(α-butyl cyanoacrylate) (BCA) micro-/nanoparticles were generated. Bovine serum albumin (BSA) was used as a model antigen. The particles were characterized in terms of size, morphology, surface charge, surface composition, protein content, entrapment efficiency, in vitro release, and protein integrity. Additionally, they were subject to cell viability and cellular uptake study with DC and M?.

Results

Size of chitosan, PLGA, and BCA micro-/nanoparticles ranged between 3.11–7.18, 0.94–6.26, and 0.30–6.34 μm, respectively. Particle morphology and in vitro protein release varied, depending on polymer type, particle composition and preparation process parameters. Chitosan microparticles were cationic, while PLGA microparticles were neutral. BCA micro-/nanoparticles were either anionic or cationic, according to polymerization pH. Protein content and entrapment efficiency of chitosan and PLGA microparticles were relatively consistent. Only integrity and conformational structure of protein encapsulated in chitosan microparticles were completely retained. Chitosan and PLGA microparticles were non-toxic to DC and M?, but the former were internalized more efficiently.

Conclusions

Spray-dried chitosan microparticles delivered the antigen efficiently to DC and M?.     

Protein Antigen Adsorption to the DDA/TDB Liposomal Adjuvant: Effect on Protein Structure, Stability, and Liposome Physicochemical Characteristics

Purpose

Understanding the nature of adjuvant-antigen interactions is important for the future design of efficient and safe subunit vaccines, but remains an analytical challenge. We studied the interactions between three model protein antigens and the clinically tested cationic liposomal adjuvant composed of dimethyldioctadecylammonium (DDA) and trehalose 6,6??-dibehenate (TDB).

Methods

The effect of surface adsorption to DDA/TDB liposomes on colloidal stability and protein physical stability/secondary structure was investigated by dynamic light scattering, circular dichroism, Fourier transform infrared spectroscopy and differential scanning calorimetry.

Results

Bovine serum albumin and ovalbumin showed strong liposome adsorption, whereas lysozyme did not adsorb. Upon adsorption, bovine serum albumin and ovalbumin reduced the phase transition temperature and narrowed the gel-to-liquid phase transition of the liposomes implying interactions with the lipid bilayer. The protein-to-lipid ratio influenced the liposome colloidal stability to a great extent, resulting in liposome aggregation at intermediate ratios. However, no structural alterations of the model proteins were detected.

Conclusions

The antigen-to-lipid ratio is highly decisive for the aggregation behavior of DDA/TDB liposomes and should be taken into account, since it may have an impact on general vaccine stability and influence the choice of analytical approach for studying this system, also/especially at clinically relevant protein-to-lipid ratios.

Transfer of lipophilic markers from PLGA and polystyrene nanoparticles to caco-2 monolayers mimics particle uptake

Purpose. The objective of this study was to evaluate nanoparticle uptake by the Caco-2 monolayer model in vitro. Special emphasis was placed on the localization and the quantification of the uptake of fluorescently labeled polystyrene and poly(lactic-co-glycolic acid) (PLGA) nanoparticles. Methods. Intracellular fluorescence was localized by fluorescence and confocal laser scanning microscopy. Particle uptake was quantified either directly, by counting internalized nanoparticles after separation from the Caco-2 monolayers, or indirectly, by extraction of the lipophilic fluorescence marker. In vitro release studies of lipophilic markers from nanoparticles were performed in standard buffer systems and buffer systems supplemented with liposomes. Results. Instead of uptake of polystyrene and PLGA nanoparticles by Caco-2 monolayers an efficient transfer of lipophilic fluorescence markers from nanoparticles into Caco-2 cells with subsequent staining of intracellular lipophilic compartments was observed. Whereas in standard buffer no release of fluorescent marker from polystyrene and PLGA nanoparticles was observed, the release studies using liposome dispersions as receiver revealed an efficient transfer of fluorescent marker into the liposome dispersion. Conclusions. The results suggest that the deceptive particle uptake is caused by a collision-induced process facilitating the transfer of lipophilic fluorescent marker by formation of a complex between the nanoparticles and the biomembranes. Diffusion of the marker within this complex into lipophilic compartments of the cell strongly affects quantitative evaluation of particle uptake.     

PHARMACOKINETICS OF SUPEROXIDE DISMUTASE IN RATS AFTER ORAL ADMINISTRATION

The kinetic behaviour of bovine erythrocyte Cu--Zn SOD was investigated in Sprague Dawley male rats after subcutaneous and oral administrations of doses ranging from 0·5 to 20 mg kg⁻¹. Studies have been carried out with SOD and SOD encapsulated into liposomes containing or not containing ceramides. The maximum concentration (C_max) in blood cell pellets ranged from 8·65 to 11·03 U/mg haemoglobin (Hb) after subcutaneous injection, and from 4·48 to 8·23 U/mg Hb after oral administration. The maximum concentrations were reached in 5 h (t _max) for the two routes. Comparison between the areas under the curves (AUCs) obtained after subcutaneous and oral administration allowed the calculation of relative bioavailability (F ′). The maximum bioavailability after oral administration was 14% for free SOD, 22% for SOD encapsulated into liposomes, and 57% when ceramides were added to liposomes. Poor SOD bioavailability was enhanced by liposome encapsulation, and ceramide addition seemed to be beneficial for oral encapsulated SOD administration.     

The Shape/Morphology Balance: A Study of Stealth Liposomes via Fractal Analysis and Drug Encapsulation

Purpose

Fractal analysis was used as a tool in order to study the morphological characteristics of PEGylated liposomes. We report on the morphological characteristics of stealth liposomes composed of DPPC and DPPE-PEG 3000 in two dispersion media using fractal analysis.

Methods

Light scattering techniques were used in order to elucidate the size, the morphology and the surface charge of PEGylated liposomes as a function of PEGylated lipid concentration and temperature. Fluorescence spectroscopy studies revealed a microenvironment of low polarity inside the liposomal membranes.

Results

All formulations were found to retain their physicochemical characteristics for at least 3 weeks. The hydrodynamic radii (R_h) of stealth liposomes were stable in the process of heating up to 50°C; while the fractal dimension values (d_f) which correspond to their morphology, have been changed during heating. Hence, these results are a first indication of the presence of a heterogeneous microdomain structure of the stealth liposomal system. The amphiphilic drug indomethacin (IND) was successfully encapsulated within the liposomes and led to an increased size of stealth liposomes, while the morphology of liposomal vectors changed significantly at the highest molar ratio of PEGylated lipid.

Conclusions

We can state that this approach can promote a new analytical concept based on the morphological characteristics and quantify the shape of drug carriers complementary to that of the conventional analytical techniques.     

Brain-specific delivery of rifampin from lactyl stearate-coupled liposomes via monocarboxylic acid transporters

Background

The blood-brain barrier (BBB) is an obstacle for pharmacologists wishing to find treatments for patients with brain disorders. The BBB restricts the uptake of many valuable hydrophilic drugs and limits their efficacy because of the presence of tight junctions, a high metabolic capacity, low pinocytic vesicular traffic, and efficient efflux mechanisms.

Aim

The present study aimed to characterize lactyl stearate-coupled liposomes and their potential for the brain targeting of rifampin (rifampicin).

Method

A liposomal delivery system was prepared for achieving the brain-targeted delivery of rifampin in 21 albino rats utilizing the monocarboxylic acid transport system. Liposomes were prepared by the cast-film method using phosphatidylcholine and cholesterol. Similarly, lactyl stearate-coupled liposomal systems were prepared by casting lactyl stearate film with lipids. These liposomal formulations were characterized for entrapment efficiency, vesicle size, in vitro drug release (using dialysis membrane), and in vivo drug accumulation in various tissues.

Results

Coupling of lactyl stearate to liposomes had a profound influence on entrapment efficiency. Entrapment efficiency was reduced from 41.28 ± 2.02% in uncoupled liposomes to 34.23 ± 1.60% in coupled liposomes. The vesicle size was increased after coupling with lactyl stearate. The in vitro drug release for the uncoupled formulation LIPO-3 was 62.9 ± 3.01% after 24 hours, whereas that of the coupled formulation LIPO-3-Ls-III was 44.5 ± 2.09%. The percentage of rifampin dose recovered from the brain following administration of lactyl stearate-coupled liposomes to albino rats at different time intervals was about 6–8 times higher than with uncoupled liposomes and about 10–12 times higher than with the plain drug solution.

Conclusion

Lactyl stearate-coupled liposomes were better localized within the brain compared to uncoupled liposomes. Lactyl stearate-coupled liposomes could be an excellent carrier system for brain targeting of the hydrophilic drug rifampin.     

The Bifunctional Liposomes Constructed by Poly(2-ethyl-oxazoline)-cholesteryl Methyl Carbonate: an Effectual Approach to Enhance Liposomal Circulation Time,pH-Sensitivity and Endosomal Escape

Purpose

A novel bifunctional liposome with long-circulating and pH-sensitive properties was constructed using poly(2-ethyl-oxazoline)-cholesteryl methyl carbonate (PEtOz-CHMC) in this study.

Methods

PEtOz-CHMC was synthesized and characterized by TLC, IR and ¹H-NMR. The obtained PEtOz lipid was inserted into liposomes by the post-insertion method. Through a series of experiments, such as drug release, tumor cell uptake, cytotoxicity, calcium-induced aggregation, pharmacokinetic experiments, etc., the pH-sensitive and long-circulating properties of PEtOzylated liposomes was identified.

Results

PEtOz-CHMC modified liposomes (PEtOz-L) showed increased calcein release at low pH. Flow cytometric analysis results showed that the fusion and cellular uptake of PEtOz-L could be promoted significantly at pH 6.4 compared with those at pH 7.4. Confocal laser scanning microscope observations revealed that PEtOz-L could respond to low endosomal pH and directly released the fluorescent tracer into the cytoplasm. MTT assays in HeLa cells demonstrated that doxorubicin hydrochloride (DOX) loaded PEtOz-L exhibited stronger anti-tumor activity in a medium at pH 6.4 than in a medium pH 7.4. PEtOz-L remained stable when these liposomes were incubated in calcium chloride solution. The cumulative calcein release rate of PEtOz-L was significantly lower than that of CL when the liposomes were dialysed in PBS. The pharmacokinetic experiments of liposomes in rats showed that t _1/2 and AUC of PEtOz-L were 4.13 times and 4.71 times higher than those of CL.

Conclusions

PEtOzylated liposomes exhibits excellent long-circulating and pH-sensitive properties. Our results suggest that PEtOz is a promising biomaterial for the modification of liposome in drug delivery.     

Lysozyme Release and Polymer Erosion Behavior of Injectable Implants Prepared from PLGA-PEG Block Copolymers and PLGA/PLGA-PEG Blends

Purpose

We evaluated the controlled release of lysozyme from various poly(D,L-lactic-co-glycolic acid) (PLGA) 50/50-polyethylene glycol (PEG) block copolymers relative to PLGA 50/50.

Methods

Lysozyme was encapsulated in cylindrical implants (0.8 mm diameter) by a solvent extrusion method. Release studies were conducted in phosphate buffered saline +0.02% Tween 80 (PBST) at 37°C. Lysozyme activity was measured by a fluorescence-based assay. Implant erosion was evaluated by kinetics of polymer molecular weight decline, water uptake, and mass loss.

Results

Lysozyme release from an AB15 di-block copolymer (15% 5 kDa PEG, PLGA 28 kDa) was very fast, whereas an AB10 di-block copolymer (with 10% 5 kDa PEG, PLGA 45 kDa) and ABA10 tri-block copolymer (with 10% 6 kDa PEG, PLGA 27 kDa) showed release profiles similar to PLGA. We achieved continuous lysozyme release for up to 4 weeks from AB10 and ABA10 by lysozyme co-encapsulation with the pore-forming and acid-neutralizing MgCO₃, and from AB15 by co-encapsulation of MgCO₃ and blending AB15 with PLGA. Lysozyme activity was mostly recovered during 4 weeks.

Conclusions

These block co-polymers may have utility either alone or as PLGA blends for the controlled release of proteins.     

Quantitative <Emphasis Type="BoldItalic">In Vitro</Emphasis> Assessment of Liposome Stability and Drug Transfer Employing Asymmetrical Flow Field-Flow Fractionation (AF4)

Purpose

In the present study we introduce an efficient approach for a size-based separation of liposomes from plasma proteins employing AF4. We investigated vesicle stability and release behavior of the strongly lipophilic drug temoporfin from liposomes in human plasma for various incubation times at 37°C.

Methods

We used the radioactive tracer cholesteryl oleyl ether (COE) or dipalmitoyl-phosphocholine (DPPC) as lipid markers and ¹⁴C-labeled temoporfin. First, both lipid labels were examined for their suitability as liposome markers. Furthermore, the influence of plasma origin on liposome stability and drug transfer was investigated. The effect of membrane fluidity and PEGylation on vesicle stability and drug release characteristics was also analyzed.

Results

Surprisingly, we observed an enzymatic transfer of ³H-COE to lipoproteins due to the cholesterol ester transfer protein (CETP) in human plasma in dependence on membrane rigidity and were able to inhibit this transfer by plasma preincubation with the CETP inhibitor torcetrapib. This effect was not seen when liposomes were incubated in rat plasma. DPPC labels suffered from hydrolysis effects during preparation and/or storage. Fluid liposomes were less stable in human plasma than their PEGylated analogues or a rigid formulation. In contrast, the transfer of the incorporated drug to lipoproteins was higher for the rigid formulations.

Conclusions

The observed effects render COE-labels questionable for in vivo studies using CEPT-rich species. Here, choline labelled ¹⁴C-DPPC was found to be the most promising alternative. Bilayer composition has a high influence on stability and drug release of a liposomal formulation in human plasma.

     

pH-sensitive immunoliposomes specific to the CD33 cell surface antigen of leukemic cells

A promising avenue in cancer therapy using liposomal formulations is the combination of site-specific delivery with triggered drug release. The use of trigger mechanisms in liposomes could be relevant for drugs susceptible to lysosomal hydrolytic/enzymatic degradation. Here, we propose a polymeric pH-sensitive liposome system that is designed to release its content inside the endosomes through a polymer structural change following receptor-mediated internalization. Specifically, pH-sensitive immunoliposomes (ILs) were obtained by including a terminally alkylated copolymer of N-isopropylacrylamide (NIPAM) in the liposome bilayer and by coupling the anti-CD33 monoclonal antibody to target leukemic cells. In vitro release of encapsulated fluorescent probes and cytosine arabinoside (ara-C) revealed that pH-sensitivity of the vector was retained in the presence of the antibody upon incubation in plasma. Flow cytometry and confocal microscopy analyses demonstrated that the pH-sensitive ILs were efficiently internalized by various CD33+ leukemic cell lines while limited interaction was found for liposomes decorated with an isotype-matched control antibody. Finally, the pH-sensitive ILs-CD33 formulation exhibited the highest cytotoxicity against HL60 cells, confirming the role of the NIPAM copolymer in promoting the escape of intact ara-C in the endosomes. These results suggest that this pH-sensitive liposomal formulation could be beneficial in the treatment of acute myeloid leukemia.     

Poly (lactide-co-glycolide)-Polymethacrylate Nanoparticles for Intramuscular Delivery of Plasmid Encoding Interleukin-10 to Prevent Autoimmune Diabetes in Mice

Purpose

Determine the efficiency of cationic nanoparticles prepared by blending poly (lactide-co-glycolide; PLGA) and methacrylate copolymer (Eudragit® E100) to deliver a therapeutic gene encoding mouse interleukin-10, in vitro and in vivo.

Methods

Nanoparticles prepared with PLGA and E100 were evaluated for delivery of plasmid DNA encoding mouse interleukin-10 in vitro and in vivo in mice upon intramuscular injection. Blood-glucose, serum interferon-gamma levels and histology of pancreas were studied to determine therapeutic efficacy. Histological evaluation of skeletal muscle from the injection site was performed to assess the biocompatibility of nanoparticles.

Results

PLGA/E100 nanoparticles showed endosomal escape evidenced by confocal microscopy and buffering ability. Transfecting HEK293 cells with plasmid-loaded PLGA/E100 nanoparticles resulted in significantly (p?Conclusions Nanoparticles prepared by blending PLGA with methacrylate can efficiently and safely deliver plasmid DNA encoding mouse interleukin-10 leading to prevention of autoimmune diabetes.     

Synthesis and anti-proliferative activity evaluation of N3-acyl-N5-aryl-3,5-diaminoindazole analogues as anti-head and neck cancer agent

Background

Nanotechnology has received great attention since a decade for the treatment of different varieties of cancer. However, there is a limited data available on the cytotoxic potential of Temozolomide (TMZ) formulations. In the current research work, an attempt has been made to understand the anti-metastatic effect of the drug after loading into PLGA nanoparticles against C6 glioma cells. Nanoparticles were prepared using solvent diffusion method and were characterized for size and morphology. Diffusion of the drug from the nanoparticles was studied by dialysis method. The designed nanoparticles were also assessed for cellular uptake using confocal microscopy and flow cytometry.

Results

PLGA nanoparticles caused a sustained release of the drug and showed a higher cellular uptake. The drug formulations also affected the cellular proliferation and motility.

Conclusion

PLGA coated nanoparticles prolong the activity of the loaded drug while retaining the anti-metastatic activity.     

Engineered Andrographolide Nanoparticles Mitigate Paracetamol Hepatotoxicity in Mice

Purpose

Paracetamol (acetaminophen, APAP) overdose is often fatal due to progressive and irreversible hepatic necrosis. The aim of this work was to design Andrographolide (AG) loaded nanoparticles to prevent similar hepatic necrosis.

Methods

Functionalized AG-loaded PLGA nanoparticles carrying different densities of heparin were prepared following a facile emulsion solvent evaporation technique. Nanoparticle morphology, loading and release kinetics were studied. Hepatic localization of the nanoparticles was investigated in both normal and APAP damaged conditions using FITC fluorescent probe. Different serum parameters and liver histopathology were further examined as indicators of hepatic condition before and after treatment.

Result

A collection of heparin functionalized AG-loaded PLGA nanoparticles were designed. Low amount of heparin on the particle surface could rapidly localize the nanoparticles up to the liver. The new functionalized AG nanoparticles affect efficient hepatoprotection in experimental mouse APAP overdose conditions. AG nanoparticle hepatoprotection was due to the rapid regeneration of antioxidant capacity and hepatic GSH store.

Conclusions

Engineered nanoparticles loaded with AG provided a fast protection in APAP induced acute liver failure.     

Microspheres Prepared with PLGA Blends for Delivery of Dexamethasone for Implantable Medical Devices

Purpose

To develop and characterize microspheres using poly (lactic-co-glycolic acid) (PLGA) blends (PLGA5050 (25 KD) and PLGA6535 (70 KD)) for dexamethasone delivery to prevent foreign body response to implantable biosensors.

Methods

A single emulsion based oil/water solvent evaporation/extraction method was used to prepare microspheres.

Results

All the microspheres prepared exhibited the typical triphasic release profile, but with different initial burst release, lag phase and zero order release rates. The burst release was reduced when the two PLGA were mixed at a molecular level, whereas increase in burst release was observed when phase separation occurred. Microspheres prepared using PLGA blends had significantly shorter lag phase. The activation energy (Ea) of dexamethasone release from microspheres was similar to the Ea value of PLGA degradation. The release kinetics were significantly enhanced under accelerated conditions (45 and 53°C) without altering the release mechanism of the post-burst phase. A rank order correlation between accelerated and “real-time” release kinetics was observed.

Conclusions

Polymer blends of PLGA can produce microspheres with reduced lag time. The accelerated release testing conditions investigated can discriminate the formulations and predict “real-time” release. Such accelerated release testing can be used as a rapid screening method to facilitate formulation development.     

Liposomal Nanoparticles Control the Uptake of Ciprofloxacin Across Respiratory Epithelia

Purpose

Liposomal ciprofloxacin nanoparticles were developed to overcome the rapid clearance of antibiotics from the lungs. The formulation was evaluated for its release profile using an air interface Calu-3 cell model and further characterised for aerosol performance and antimicrobial activity.

Methods

Liposomal and free ciprofloxacin formulations were nebulised directly onto Calu-3 bronchial epithelial cells placed in an in vitro twin-stage impinger (TSI) to assess the kinetics of release. The aerosol performance of both the liposomal and free ciprofloxacin formulation was characterised using the next generation impactor. Minimum inhibitory and bactericidal concentrations (MICs and MBCs) were determined and compared between formulations to evaluate the antibacterial activity.

Results

The liposomal formulation successfully controlled the release of ciprofloxacin in the cell model and showed enhanced antibacterial activity against Pseudomonas aeruginosa. In addition, the formulation displayed a respirable aerosol fraction of 70.5?±?2.03% of the emitted dose.

Conclusion

Results indicate that the in vitro TSI air interface Calu-3 model is capable of evaluating the fate of nebulised liposomal nanoparticle formulations and support the potential for inhaled liposomal ciprofloxacin to provide a promising treatment for respiratory infections.     

Optimization of Stability, Encapsulation, Release, and Cross-Priming of Tumor Antigen-Containing PLGA Nanoparticles

Purpose

In order to investigate Poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP) as potential vehicles for efficient tumor antigen (TA) delivery to dendritic cells (DC), this study aimed to optimize encapsulation/release kinetics before determining immunogenicity of antigen-containing NP.

Methods

Various techniques were used to liberate TA from cell lines. Single (gp100) and multiple (B16-tumor lysate containing gp100) antigens were encapsulated within differing molecular weight PLGA co-polymers. Differences in morphology, encapsulation/release and biologic potency were studied. Findings were adopted to encapsulate fresh tumor lysate from patients with advanced tumors and compare stimulation of tumor infiltrating lymphocytes (TIL) against that achieved by soluble lysate.

Results

Four cycles of freeze-thaw + 15 s sonication resulted in antigen-rich lysates without the need for toxic detergents or protease inhibitors. The 80KDa polymer resulted in maximal release of payload and favorable production of immunostimulatory IL-2 and IFN-γ. NP-mediated antigen delivery led to increased IFN-γ and decreased immunoinhibitory IL-10 synthesis when compared to soluble lysate.

Conclusions

Four cycles of freeze-thaw followed by 15 s sonication is the ideal technique to obtain complex TA for encapsulation. The 80KDa polymer has the most promising combination of release kinetics and biologic potency. Encapsulated antigens are immunogenic and evoke favorable TIL-mediated anti-tumor responses.     

Protein Encapsulation in Unilamellar Liposomes: High Encapsulation Efficiency and A Novel Technique to Assess Lipid-Protein Interaction

Purpose

To encapsulate a large amount of protein (superoxide dismutase, SOD) into unilamellar liposomes using a simple process and to investigate the lipid-protein interaction.

Method

To achieve protein encapsulation, preformed unilamellar empty liposomes were mixed with SOD and subjected to freeze-thaw cycling. To investigate the lipid-protein interaction, a novel light scattering technique was used.

Results

Up to 50% protein encapsulation was achieved at ??150?nm. There was no significant change in particle size following the freeze-thaw cycling. SOD had a strong interaction with DPPC liposomes containing high concentration of cholesterol. Light scattering data revealed that in some cases the SOD molecules were present inside the lipid bilayer.

Conclusions

The method reported here allows great flexibility in the manufacturing process as the liposome preparation and protein-loading operations can be separated. Accordingly, empty liposomes can be prepared without concern about protein stability, making the manufacturing process more flexible and easy to control and ultimately leading to improved product quality. To explain the SOD-lipid interaction, a ??pocket-embedding?? theory was proposed. The encapsulation method reported here can be applied to hydrophilic small molecules as well as most hydrophilic proteins to achieve high encapsulation efficiency.     

Near-Infrared Light-Sensitive Liposomes for the Enhanced Photothermal Tumor Treatment by the Combination with Chemotherapy

Purpose

To develop a near-infrared (NIR) light-sensitive liposome, which contains hollow gold nanospheres (HAuNS) and doxorubicin (DOX), and evaluate their potential utility for enhancing antitumor activity and controlling drug release.

Methods

The liposomes (DOX&HAuNS-TSL) were designed based on a thermal sensitive liposome (TSL) formulation, and hydrophobically modified HAuNS were attached onto the membrane of the liposomes. The behavior of DOX release from the liposomes was investigated by the dialysis, diffusion in agarose gel and cellular uptake of the drug. The biodistribution of DOX&HAuNS-TSL was assessed by i.v. injection in tumor-bearing nude mice. Antitumor efficacy was evaluated both histologically using excised tissue and intuitively by measuring the tumor size and weight.

Results

Rapid and repetitive DOX release from the liposomes (DOX&HAuNS-TSL), could be readily achieved upon NIR laser irradiation. The treatment of tumor cells with DOX&HAuNS-TSL followed by NIR laser irradiation showed significantly greater cytotoxicity than the treatment with DOX&HAuNS-TSL alone, DOX-TSL alone (chemotherapy alone) and HAuNS-TSL plus NIR laser irradiation (Photothermal ablation, PTA, alone). In vivo antitumor study indicated that the combination of simultaneous photothermal and chemotherapeutic effect mediated by DOX&HAuNS-TSL plus NIR laser presented a significantly higher antitumor efficacy than the PTA alone mediated by HAuNS-TSL plus NIR laser irradiation.

Conclusions

Our study could be as the valuable reference and direction for the clinical application of PTA in tumor therapy.