Dislodged stent: a simple retrieval technique.

We report a technique for retrieval of a dislodged coronary stent using a stiff angioplasty wire positioned beside the initial stent guidewire. This two-wire technique provides a better platform to move and position the snare device without moving the dislodged stent and thus lessens the risk of embolization. If a larger femoral sheath is needed for stent removal, this method facilitates sheath exchange. Cathet. Cardiovasc. Intervent. 47:323-324, 1999.     

Retrieval of occluding unexpanded palmaz-schatz stent from a saphenous aorto-coronary vein graft

The Palmaz-Schatz coronary stent is used frequently to reduce the rate of restenosis of balloon angioplasty in saphenous vein grafts. In many European centers, the stent, manually crimped on a balloon, is advanced across the stenosis without a protective sheath. This report describes a patient in whom an attempt to deploy a stent in the orifice of a saphenous vein graft was complicated by dislodgement of the unexpanded stent from the balloon. The unexpanded stent caused immediate occlusion of the vein graft and severe ischemic symptoms. The stent was retrieved by inflation of another balloon in the graft, distal to the stent, pulling the balloon toward the guiding catheter, and then withdrawing the whole system.     

Damage to a covered stent by a thrombectomy device.

A 75-year-old with a history of coronary bypass grafting was found to have significant stenoses in a vein graft to the right coronary artery. Symbiot stents, with a polytetrafluoroethylene covering, were used to treat areas in the proximal and middle sections of the graft. The following day, she developed symptoms and signs consistent with an acute inferior infarction. The graft was found to be thrombosed. Thrombectomy was performed using an X-Sizer device, consisting of a helical cutter connected to a vacuum source. This resulted in damage to the stent lining, which led to jamming of the device and subsequent removal of a piece of the stent covering. Treatment was by way of deployment of a long stent within the damaged stent. Recovery was unremarkable. Caution or avoidance of this device appears warranted in the setting of covered stent procedures.     

Role of intravascular ultrasound in the management of intracoronary dislodged stent

We describe a nonagenarian patient in whom a paclitaxel-eluting stent was lost during an attempt of direct stent implantation at the distal right coronary artery after removal of the guide-wire. The potential usefulness of intravascular ultrasound in the management of this complication is illustrated. The dislodged stent could not be located by fluoroscopy. However, intravascular ultrasound allowed to find the undeployed stent at the proximal segment of the right coronary artery. It showed that the guide-wire was placed outside the lost stent lumen and this undeployed stent was crushed against a previously implanted stent by another stent with optimal intravascular ultrasound-guided implantation.     

Open-biopsy-forceps technique for endoscopic removal of distally migrated and impacted biliary metallic stents

BACKGROUND: Endoscopic removal of distally migrated and impacted biliary metallic stents is technically challenging. An open-biopsy-forceps technique for endoscopic removal of these migrated stents is described. METHODS: The technique was used in 4 patients with distally migrated and impacted covered metallic stents. A closed biopsy forceps was advanced through the stent mesh and opened within the stent to form an "anchor." With endoscope withdrawal, the stent was dislodged easily from the duodenum to the stomach. After grasping an end of the stent with a snare, the stent was removed by complete withdrawal of the endoscope. OBSERVATIONS: In all patients, the impacted stent was removed successfully. Mean time for removal was 10.2 minutes. Although ulceration was evident in the duodenal wall where the distal stent end was impacted in all patients, no other complication or adverse event was observed. CONCLUSIONS: The open-biopsy-forceps technique is useful for endoscopic removal of distally migrated and impacted biliary metallic stents.     

Retrieval of a subintimal fractured guide wire from the brachial artery following saphenous vein graft stenting

We present a case of a 58‐year‐old woman with diabetes mellitus with a history of angina, coronary artery bypass 24 years previously and who underwent retrieval of a fractured coronary buddy wire from the right brachial artery following attempted coronary intervention to a saphenous vein graft via the right radial route. Attempted removal of the guide wire had caused guide catheter‐induced dissection of the vein graft in addition to a distal stent edge dissection before fracture in the brachial artery. The fractured end of the buddy wire was found to be in the subintimal space and could only be retrieved by advancing the wire into the subclavian artery by means of wrapping its free portion around the guiding catheter. Its fractured end could then be snared into the guiding catheter but could only be withdrawn from behind the stented segment in the vein graft by means of a trap balloon in the guiding catheter. Successful stenting of a guide catheter‐induced dissection and distal stent edge dissection within the vein graft was then performed. This case highlights the hazards of deploying stents over buddy wires and of fractured guide wires in coronary intervention. © 2015 Wiley Periodicals, Inc.     

Dislodged and mechanically distorted stent stuck within a previously implanted drug-eluting stent

Coronary stent loss during percutaneous coronary intervention is rare and is often associated with significant morbidity. Several retrieval techniques, overlying stent deployment and crushing, and surgical removal can be used to deal with a stent lost in the coronary system. We successfully treated a dislodged and mechanically distorted coil stent stuck within a previously implanted drug-eluting stent (DES) by stent-crush technique. This case might provide insight into the mechanisms responsible for the longitudinal fragility of cobalt alloy and coil-structure stents and stent fracture of DES. In the DES era, careful attention should be paid to such complications when attempting to deliver a stent to a distal vessel through a pre-existing DES.     

Surgical retrieval of dislodged stent during transradial coronary intervention

Coronary stent dislodgment is a rare but serious complication during percutaneous coronary intervention. During transradial coronary intervention, retrieval of a dislodged and deformed stent into the guiding catheter is difficult or impossible, since a small 6 Fr guiding catheter and sheath system is commonly used. I describe a new method to retrieve a dislodged and damaged stent during transradial coronary intervention. When a dislodged and unexpanded stent is not pulled back completely into the guiding catheter, the damaged stent and guiding catheter can be withdrawn together into the radial artery and retrieved successfully by radial artery cutdown and repair method.     

Successful closure of a coronary vessel rupture with a vein graft stent: Case report

We report a successful percutaneous closure of a brisk coronary artery rupture with a custom-made “vein graft stent,” a Palmaz-Schatz stent covered with a vein graft. This method is an elegant and effective alternative to the traditional surgical approach and should be considered whenever technically and clinically feasible. © 1996 Wiley-Liss, Inc.     

Old technique, new use: novel use of a buddy wire to deploy a detached stent

Stent dislodgement or loss in a coronary artery carries significant risks of infarction, thrombosis and requirement for emergency bypass surgery. Even with the advent of premounted stents, stent loss can occasionally occur, especially when performing intervention in calcified and tortuous anatomy. Multiple stent retrieval/stent exclusion techniques have been described to overcome this dreaded complication. We describe the first case of deploying a dislodged stent using a buddy wire technique with both wires through the center of the dislodged stent, and subsequent use of the small balloon technique to successfully deploy a dislodged stent in a heavily calcified and tortuous circumflex artery.     

Perforation of saphenous vein graft during coronary stenting: A case report

We report on a case of coronary perforation during stenting of a saphenous vein graft with a biliary stent. Sealing of the perforation was achieved with another biliary stent deployed within the first stent at the site of the perforation, and with prolonged balloon inflation. This case illustrates that vein graft perforation can occur with coronary stenting, and could potentially be treated with prolonged balloon inflation and/or stenting at the site of the first stent. © 1996 Wiley-Liss, Inc.     

Coronary stent fracture in a saphenous vein graft to right coronary artery--successful treatment by the novel use of the Jomed coronary stent graft: case report and review of the literature

Coronary stents ultimately owe their success to the mechanical scaffolding effect that they provide. The mechanical properties of these metallic stents were designed not only to provide radial strength so as to prevent vessel recoil, but also to be able to resist the mechanical stress of vessel movement over millions of cardiac cycles. We present a case whereby the latter mechanical stresses may have contributed to the fracture of a stent implanted in the saphenous vein graft to the right coronary artery. We demonstrated that the point at which the stent fracture occurred coincided with an area of maximal graft movement. Our patient presented with acute myocardial infarction due to graft occlusion 3 months after stent implantation. We re-intervened by deploying a Jomed coronary stent graft, consisting of 2 layers of stent, to cover the stent fracture, thereby providing optimal support to this area of high mechanical stress, resulting in a good long-term clinical outcome. The novel use of a Jomed coronary stent graft for this indication has not been previously described. Review of the literature indicates that factors that may predispose to stent fracture include location in the right coronary vein graft, long stents, overlapping stents and stent over-expansion.     

Treatment of post-stenotic saphenous vein graft aneurysm: special considerations with the polytetrafluoroethylene-covered stent

The use of the polytetrafluoroethylene-covered stents is expanding and its full potential in percutaneous coronary intervention is still being defined. The synthetic covered stent has been used in the treatment of coronary as well as saphenous vein graft disease. In the treatment of relatively large aneurysms of saphenous vein grafts, however, the technical and anatomic aspects may be unusual and challenging. We present a case of an ostial saphenous vein graft lesion with a saccular post-stenotic aneurysm treated with a polytetrafluoroethylene-covered stent. Special consideration is made of the procedural technique and the unusual anatomic challenge.     

Immediate and one-year outcome of percutaneous intervention of saphenous vein graft disease with paclitaxel-eluting stents

The aim of this study was to evaluate the outcome after paclitaxel-eluting stent implantation in 40 patients with 52 saphenous vein graft lesions. By Kaplan-Meier estimates, the probability of major adverse cardiac event-free survival for 1 year was 92.5%. A paclitaxel-eluting stent for saphenous vein graft disease appears to be feasible and safe, with a low rate of reintervention at 1 year, but late follow-up is needed to confirm these observations.     

Unintentional extraction of an endothelialized bare metal stent

The extraction of a previously endothelialized stent has been rarely reported in the literature. We report a case of a patient with unstable angina due to in-stent restenosis. During percutaneous coronary intervention, a stent was inadvertently dislodged in the ostium of the right coronary artery. Retrieval of the dislodged stent led to unintentional extraction of the previously endothelialized bare metal stent.     

Percutaneous bail-out treatment of vein graft rupture with a polytetrafluoroethylene-covered stent

Abstract

Vessel perforation is an undesirable and life-threatening complication during vein graft angioplasty. We report on a case of vein graft rupture during angioplasty, which was successfully managed with deployment of a polytetrafluoroethylene-covered stent.     

Treatment of a saphenous vein graft to right ventricle fistula with a PTFE-covered stent: a case report.

This report demonstrates the use of a covered stent for the correction of a fistula from a saphenous vein graft to the right ventricle. The use of this stent resulted in complete obliteration of the fistulous tract and restoration of flow into the sequential limb of the graft.     

Rupture iatrogène intrastent d’un pontage aorto-coronaire veineux traitée avec succès par endoprothèse couverte

Percutaneous coronary interventions of saphenous vein grafts are associated with an increased risk of periprocedural complications; among these, the rupture of the vein graft is probably the less common and the most dangerous; it is even more exceptional when it occurs on a stented portion of the graft. We report the case of a 75-year-old man who presented during a balloon angioplasty of intent restenosis of a saphenous vein graft a spectacular graft rupture at the level of the previously stented site and who was ultimately successfully treated with a covered stent.     

Combined endovascular and surgical treatment of infected carotid-carotid bypass graft.

PURPOSE: To present a complex case involving an infected carotid-carotid bypass graft that was successfully treated with a stent-graft and subsequent surgical removal of the infected graft. CASE REPORT: A 75-year-old woman presented with persistent purulent drainage of an infected and exposed carotid-carotid prosthetic bypass graft. Wound cultures revealed methicillin-resistant Staphylococcus aureus. She was treated with appropriate intravenous antibiotic therapy without improvement in wound drainage. Because of her comorbid conditions, a decision was made to pursue endovascular revascularization of her left and right common carotid arteries (CCA), with subsequent surgical removal of the infected prosthetic graft. The patient underwent balloon angioplasty; a 7x18-mm Omnilink stent was deployed in the innominate artery and a 7x18-mm Herculink stent in the ostial left CCA. During the same procedure, the carotid-carotid bypass graft was excluded with deployment of an 8x50-mm Viabahn stent-graft in the right CCA. Several days later, the infected and now thrombosed carotid-carotid bypass graft was surgically removed, and an area of adjacent muscle was used to patch the previously excluded connection of the bypass from the right CCA. A saphenous vein patch was used to repair the defect in the left CCA. Her postoperative course was uneventful. At 1 year, the clinical and duplex examinations revealed satisfactory wound healing and patent left and right CCAs. CONCLUSION: This case indicates that a combined endovascular and surgical approach may be a safe and effective option in the treatment of carotid-carotid bypass graft infection.     

Percutaneous treatment of dissection of the ascending aorta occurring as a complication during coronary angioplasty of a saphenous vein bypass graft

Aortocoronary dissection can occur as a complication of angioplasty of native coronary arteries. This case report is of aortic dissection occurring as a complication of percutaneous coronary intervention of proximal anastomoses of a saphenous vein bypass graft. The aortic dissection that had progressed retrogradely into the ascending aorta was treated percutaneously by stenting in the saphenous vein graft with a membrane-covered stent.