Biomechanical evaluation of a medial knee reconstruction with comparison of bioabsorbable interference screw constructs and optimization with a cortical button

Current fixation techniques in medial knee reconstructions predominantly utilize interference screws alone for soft tissue graft fixation. The use of concurrent fixation techniques as part of a hybrid fixation technique has also been suggested to strengthen soft tissue fixation, although these hybrid fixation techniques have not been biomechanically validated. The purpose was to biomechanically evaluate two distal tibial superficial MCL graft fixation techniques that consisted of an interference screw alone and in combination with a cortical button. Furthermore, the aim was to compare interference screws of different constructs. Twenty-four porcine tibias (average bone mineral density of 1.3 ± 0.2 g/cm²; range, 1.0–1.6 g/cm², measured by DEXA scan) were divided into 4 groups of six specimens each. Group Ia consisted of a 7 × 23-mm poly-l-lactide (PLLA) interference screw. Group Ib utilized a PLLA interference screw in combination with a cortical button. Group IIa consisted of a 7 × 23-mm composite 70% poly(l-lactide-co-D, l-lactide) and 30% biphasic calcium phosphate (BCP) interference screw. Group IIb also utilized a composite interference screw in combination with a cortical button. The specimens were biomechanically tested with cyclic (500 cycles, 50–250 N, 1 Hz) and load-to-failure (20 mm/min) parameters. During cyclic loading, a significant increase in stiffness was seen for the PLLA hybrid 29.6 (±6.9) N/mm fixation compared to the PLLA screw-only 21.2 (±3.8) N/mm group (P < 0.05). Failure loads were 407.8 (±77.9) N for the composite screw, 445 (±72.2) N for the PLLA screw-only, 473.9 (±69.6) N for the composite hybrid fixation, and 511.0 (±78.5) N for the PLLA hybrid fixation. The PLLA screw alone was found to provide adequate fixation for a superficial MCL reconstruction, and the use of a cortical suture button combined with the PLLA screw resulted in a stiffer fixation during cyclic loading. The current reconstruction superficial MCL graft fixation technique utilizing a PLLA interference screw alone serves as an adequate recreation of the native tibial superficial MCL strength. In addition, a hybrid fixation with a cortical button which lends additional cyclic stiffness to its fixation would be advisable for use in suboptimal fixation cases.     

Tibial tunnel widening after bioresorbable poly-lactide calcium carbonate interference screw usage in ACL reconstruction

Developing bio-absorbable interference screws for anterior cruciate ligament (ACL) reconstruction has proven to be a challenging task. The aim of this study was to investigate the osteogenetic response of poly-lactide carbonate (PLC) interference screws in ACL reconstruction in humans. Ten patients (median age, 28 years) underwent arthroscopic ACL reconstruction with semitendinosus/gracilis tendon graft and a PLC interference screw. The patients were scanned with a multi-slice CT scanner 2 weeks and 1 year postoperatively. Fourteen days postoperatively a mean tunnel widening of 78% [52%; 110%] was observed. At 1-year follow-up, the mean tunnel widening was 128% [84%; 180%]. No sign of bone replacement or bone ingrowth was observed. Factors such as accelerated rehabilitation, micro-motions, and early screw degradation might be responsible for this large tunnel widening. Our results demonstrate the difficulty in translation of preclinical data. This study illustrates the need for extensive preclinical investigation of new materials for clinical purposes.     

MRI in ACL reconstructive surgery with PDLLA bioabsorbable interference screws: evaluation of degradation and osteointegration processes of bioabsorbable screws

PURPOSE: Anterior cruciate ligament (ACL) reconstructive surgery has seen significant progress since bioabsorbable interference screws have replaced synthetic metallic screws for ligament graft fixation within the femoral and tibial osseous tunnel. Our study compared the MR images of patients who underwent ACL reconstruction using bioabsorbable interference screws with those of patients who underwent ACL reconstruction using metallic screws to evaluate the MR aspects of degradation and osteointegration processes of bioabsorbable interference screws post-operatively. MATERIALS AND METHODS: Between September 1999 and December 2002 we performed MRI on 40 patients who underwent arthroscopic ACL reconstruction with patellar tendon auto-graft using PDLLA bioabsorbable screws in 35 cases and metallic screws in 5 cases. After surgery, all patients underwent an intensive rehabilitation programme along with clinical evaluation using the standard knee ligament evaluation form of the International Knee Documentation Committee (IKDC) and radiological examinations. MR studies were performed 1, 2 and 3 years post-operatively using a 0.5-Tesla MR scanner with T1- and T2*-weighted and STIR sequences. RESULTS: Thirty-three patients were clinically classified as group A IKDC (full return to sports activity) and 7 patients as group B IKDC. No foreign-body reaction was found in patients treated with bioabsorbable interference screws, both from a clinical point of view and from laboratory exams. Ferromagnetic artefacts were found in all patients treated with metallic interference screws. In patients with bioabsorbable interference screws, degradation of the screws and absence of significant artefacts allowed correct evaluation of the signal of the reconstructed ligament throughout its length, the osseous tunnels and the joint cavity. In 34 of 35 patients with bioabsorbable interference screws, the screw could not be detected due to complete degradation. In 8, 12 and 4 cases, a small cyst-like formation due to screw hydrolysis was present at the screw site within 1, 2 and 3 years from surgery respectively. Only in 4 cases was the process of osteointegration of the screw and bone plug complete 3 years after the operation, with consequent restoration of bone morphology. DISCUSSION AND CONCLUSIONS: The use of bioabsorbable interference screws is a valuable alternative to synthetic metallic fixation implants as the absence of artefacts allows correct post-operative MR follow-up. MRI is the only technique able to visualize all the portions of the transplant and to evaluate the healing process. Bioabsorbable interference screws usually degrade within one year. However, full osteointegration requires a long time and may not be complete 3 years after surgery. The presence of cyst-like formations at the screw site has to be regarded as a normal feature of the screw degradation process. Therefore, the use of bioabsorbable interference screws is recommended as it enables MR follow-up of the knee after ACL reconstruction.     

Magnetic resonance imaging appearance of anterior cruciate ligament reconstruction using Calaxo screws

Bioabsorbable interference screws are commonly used to secure the graft during anterior cruciate ligament (ACL) reconstruction, in part because they result in less image degradation on subsequent magnetic resonance imaging (MRI). However, some bioabsorbable screws are associated with abnormalities on MRI examination not reported with metallic interference screws. We describe a finding on knee MRI examination after ACL reconstruction using a polylactide carbonate (PLC) bioabsorbable screw that we believe to be previously unreported with any other bioabsorbable screws. The finding raised suspicion of hemorrhage or infection, neither of which were present clinically. Analysis of tissue from the tibial tunnel suggested an explanation for the MRI finding: calcite crystals. An additional five patients with knee MRI examinations after ACL reconstruction using a PLC screw were reviewed and correlated with clinical findings with four having similar imaging abnormalities present. The PLC (Calaxo screw, Smith and Nephew, Andover, MA) screw used in these patients has been recalled in the United States and Europe by the manufacturer after a greater than expected incidence of adverse reactions, and legal action may be pending.     

Intraarticular migration of a broken biodegradable interference screw after anterior cruciate ligament reconstruction

Poly-l-lactic acid biodegradable screws have been used effectively for graft fixation in anterior cruciate ligament (ACL) reconstruction. The overall complication rate associated with the use of this implant is low, although some authors reported complications, such as osteolysis and aseptic effusion of the knee joint. We report a case of a 29-year-old female patient with a failure of a biodegradable interference screw at 22 months after ACL reconstruction using bone–patellar tendon–bone graft. In this illustrated case, the screw broke and migrated into the knee joint. In addition, we performed a detailed review of the medical literature from 1990–2005 to identify possible causes of biodegradable screw failures. We identified six published cases of bioabsorbable interference screw failure with migration into the knee joint. Several authors have reported small diameter of the screw, poor bone quality, bone resorption, and screw divergence as potential causes for intraarticular migration of metallic interference screws. With regard to bioscrews, no specific risk factors for screw breakage and intraarticular migration have been reported. ACL reconstruction with the use of bioabsorbable interference screws for fixation is considered to be reliable. However, we need to be aware of potential problems associated with the use of this implant. Early recognition of bioscrew failure may prevent associated morbidities, such as subsequent cartilage damage.     

Severe cartilage damage by broken poly–L–lactic acid (PLLA) interference screw after ACL reconstruction

Poly–L–lactic acid (PLLA) bioabsorbable interference screws are widely used for fixation of tendon to bone and bone to bone in anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) reconstructions. Complications are rare. To our knowledge this is the first report of severe chondral damage caused by late breakage of the screw. Breakage of bioscrews has only been published in cases with tendon to bone fixation.     

Magnetic resonance imaging analysis of bioabsorbable interference screws used for fixation of bone-patellar tendon-bone autografts in endoscopic reconstruction of the anterior cruciate ligament

BACKGROUND: Metal interference screws can cause problems if revision is needed and can interfere with magnetic resonance imaging. Bioabsorbable screws have been developed to prevent these problems, but the rate of resorption and integration is not well understood. HYPOTHESIS: Poly-L-lactic acid interference screws will be resorbed 2 years after anterior cruciate ligament reconstruction. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: The study group consisted of 19 patients with isolated anterior cruciate ligament ruptures reconstructed with bone-patellar tendon-bone autografts fixed with poly-L-lactic acid interference screws using an endoscopic technique. Magnetic resonance imaging was used to evaluate resorption of the screws, bony integration of the screws, and integration of the bone blocks after 2 years. RESULTS: At 2 years, the mean reduction in the volume of the femoral screws was 64% and of the tibial screw was 63%. Bony integration of the femoral bone block was considered good in 17 patients and fair in 2 patients. Integration of the tibial bone block was considered good in 16 patients and fair in 1 patient who demonstrated widening of the tibial tunnel. Osteolysis around the screws was seen in 3 patients in the femur and none in the tibia. CONCLUSION: The mean reduction in volume of the poly-L-lactic acid screws as measured by magnetic resonance imaging after 2 years was approximately two thirds. The integration of the bone blocks was considered good in 90% of the patients. Osteolysis around the screws was visible in 16% of the patients. CLINICAL RELEVANCE: Two years after ACL reconstruction using poly-L-lactic acid interference screws, the surgeon can expect to find approximately one third of the volume of the screw remaining in the bone tunnels.     

Soft tissue graft interference fit fixation: observations on graft insertion site healing and tunnel remodeling 2 years after ACL reconstruction in sheep

Using soft tissue grafts for anterior cruciate ligament (ACL) reconstruction, insertion site healing plays a crucial role in the long-term fate of the graft. It has been shown in an experimental animal study that using a soft tissue graft and anatomic graft fixation, a direct ligamentous insertion alike the native ACL developed 24 weeks postoperatively. Yet there are no reports on the long-term insertion site healing of anatomically fixed soft tissue grafts. The objective of this study was to evaluate graft insertion site healing, the intra-tunnel fate of the graft and its osseous replacement 2 years after ACL reconstruction in sheep. The left ACLs of six sheep were replaced by an autologous flexor tendon split graft and anatomically fixed with biodegradable poly-(d, l-lactide) interference screws. Animals received polychromic sequential labeling at different points in time to determine bone apposition per period. For evaluation of the insertion site healing and intra-tunnel changes, MRI scans were taken in vivo. Following sacrifice, radiographic imaging, conventional histology and fluorescence microscopy was undertaken. Most of the specimens showed a wide direct ligamentous insertion. It showed patterns alike the direct ligament insertion seen in intact ACLs. The intra-tunnel part of the graft had completely lost its tendon-like structure and in two cases, it was separated from the graft insertion by a thick bony layer. The biodegradable interference screw was fully degraded in all specimens. Ossification of the former drill tunnels was intense, showing only partial-length tunnel remnants in one femoral and three tibial specimens. As the graft heals to the joint surface and the aperture site is closed with soft tissue, mechanical stress of the intra-tunnel part of the graft is eliminated and the bone tunnel is protected from synovial fluid, resulting in osseous bridging of the tunnel aperture site, accelerated intra-tunnel graft resorption and its osseous replacement.     

Poly-L-lactic acid — hydroxyapatite (PLLA-HA) bioabsorbable interference screws for tibial graft fixation in anterior cruciate ligament (ACL) reconstruction surgery: MR evaluation of osteointegration and degradation features

Purpose

We evaluated with magnetic resonance imaging (MRI) the degradation and osteointegration features of a new type of bioabsorbable interference (BioRCI) screw composed of poly-L-lactic acid and hydroxyapatite (PLLA-HA) used for tibial graft fixation in anterior cruciate ligament (ACL) reconstruction.

Materials and methods

Thirty-one patients underwent arthroscopic surgery for ACL reconstruction using doubled gracilis and semitendinosus tendons fixed to the tibial tunnel with PLLA-HA (BioRCI-HA) screws. Two groups of patients were evaluated, one group 10–13 months after surgery and the other after 30–40 months. The standard knee ligament evaluation form of the International Knee Documentation Committee (IKDC) was used for clinical assessment and MRI for the radiological assessment.

Results

MRI after 10–13 months revealed findings referable to healing and integration of the bone-graft-screw system, findings that disappeared at later follow-up examinations. The BioRCI-HA screw remained constantly visible in all patients, although with changes in signal intensity over time.

Conclusions

BioRCI-HA screws allow adequate primary stability and superior osteoconduction and biocompatibility in comparison with plain PLLA screws. The absence of ferromagnetic artefacts allows accurate MRI follow-up and adequate evaluation of ligament synovialisation, screw degradation and graft osteointegration.     

Anatomic double-bundle ACL reconstruction with femoral cortical bone bridge support using hamstrings

While ACL reconstruction using single-tunnel and single-bundle techniques generally yields good clinical results, more and more studies are now reporting results that are not entirely satisfactory, as this type of reconstruction only exerts control over forward tibial shifting, not tibial rotation, when activities that exert high functional demands are undertaken. As a result, recent years have seen the appearance of numerous techniques for anatomic ACL reconstruction that reproduce both the anteromedial and posterolateral bundles of the ligament and therefore offer potentially improved rotational control. This article outlines a technique for anatomic ACL reconstruction. Said technique uses central and anteromedial portals, which afford a better perspective of the intercondylar notch. The main features of this technique are: (1) Double bone tunnels in the femur and tibia. The femoral tunnels are created using the out-in technique. (2) Double bundles with hamstring tendon grafts. (3) Tibial fixation by means of interference screws. (4) Femoral fixation in which the graft is supported by a cortical bone bridge and an interference screw in one of the tunnels. We feel that the main advantage of this technique is precisely that it introduces a new feature (a cortical femoral bone bridge) and is not necessarily dependent on specific double-bundle instrumentation, using only regular drill guides to create out-in femoral tunnels. This enables said tunnels to be located with ease and precision. The femoral fixation model itself, with the support provided by the cortical bone bridge, potentially guarantees a level of resistance that can be further increased with the aid of one or two interference screws, thus avoiding the need for post fixation techniques that require the use of screws or buttons.     

The unpredictable material properties of bioabsorbable PLC interference screws and their adverse effects in ACL reconstruction surgery

The aim of this study was to look at the clinical outcome of polylactide carbonate (PLC) interference screws in knee ligament reconstruction surgery. We prospectively followed up 59 patients who underwent primary hamstring anterior cruciate ligament (ACL) reconstructions using PLC (Calaxo screw; Smith and Nephew, Andover, MA) screws to secure the graft in the tibial tunnel. The average age was 34 years (range 17–55 years, SD 8.93). Twenty-three (39%) patients presented with complications [synovitis in 15% (nine) patients, prominent tibial swelling in 34% (20) patients and both in seven patients]. In comparison, similar complications were not seen in two groups of 59 age and sex matched patients in whom PLLA (Bio RCI; Smith and Nephew, Andover, MA) screws or Titanium (RCI; Smith and Nephew, Andover, MA) screws were used by the same surgeon. The problems encountered in the PLC screw group did not adversely affect knee stability. Six patients underwent exploration of the tibial tunnel site. A sterile white cheesy substance was removed, leaving an empty tibial tunnel. The ACL graft was found to be well attached to tibial tunnel in all cases. The PLC screw diameter, surface area or tibial tunnel diameter did not have any correlation to the occurrence of complications. Two patients required multiple washouts, one of whom developed a deep infection. The degradation of PLC screws does not follow the gradual and controlled pattern demonstrated in the ovine model. The unpredictable screw degradation, and the reaction to it can lead to serious clinical consequences.     

Initial fixation strength of a hybrid technique for femoral ACL graft fixation

Aperture fixation with interference screws matching the diameter of the tunnel is associated with the risk of graft laceration and graft rotation. A hybrid fixation technique (extracortical and aperture fixation) with undersized interference screws provides a higher fixation strength when compared to an aperture fixation using only a screw matching the size of the tunnel and also reduces the risk of graft laceration. This research is an experimental laboratory study. We evaluated the initial fixation strength at time-zero of an extracortical-, a hybrid- and an aperture fixation in ACL reconstruction using extracortical buttons and different sized interference screws in porcine knees. The tests were performed using a single cycle and cyclic loading protocol. Analysis of yield load, maximum load and stiffness in the single cycle loading test showed no statistically significant differences for hybrid fixation with a 1 mm undersized screw and aperture fixation with a screw matching the size of the tunnel. Cyclic loading tests showed a statistically significant difference between hybrid and aperture fixation. The use of an undersized screw alone in aperture fixation resulted in insufficient fixation strength. The initial fixation strength of the hybrid technique with undersized screws is higher compared to an interference screw fixation alone. The hybrid fixation technique is an alternative for ACL graft fixation.     

Recurrent locking of knee joint caused by intraarticular migration of bioabsorbable tibial interference screw after arthroscopic ACL reconstruction

Two cases are reported in which, after ACL reconstruction with autologous hamstring grafts, tibial polylactide interference screws migrated into the knee joint. Clinically, both patients presented with recurrent locking of the joint. In one case, a broken 15 mm-long tip of the screw was found intra-articularly. In the other case, the whole screw had migrated into the joint cavity. The degradation process of polylactic acid, operative technique and bone quality are discussed as possible reasons for these complications.     

Pullout strength of tibial graft fixation in anterior cruciate ligament replacement with a patellar tendon graft: interference screw versus staple fixation in human knees

The endoscopic single incision technique for anterior cruciate ligament (ACL) reconstruction with a femoral half-tunnel may lead to a graft/tunnel mismatch and subsequent protrusion of the block from the tibial tunnel. The typical tibial fixation with an interference screw is not possible in these cases. Fixation with staples in a bony groove inferior to the tunnel outlet can be used as an alternative technique. Current literature does not provide biomechanical data of either fixation technique in a human model. This study was performed to evaluate the primary biomechanical parameters of this technique compared with a standard interference screw fixation of the block. Fifty-five fresh-frozen relatively young (mean age 44 years) human cadaver knee joints were used. Grafts were harvested from the patellar tendon midportion with bone blocks of 25 mm length and 9 mm width. A 10-mm tibial tunnel was drilled from the anteromedial cortex to the center of the tibial insertion of the ACL. Three different sizes of interference screws (7 × 30, 9 × 20, 9 × 30 mm) were chosen as a standard control procedure (n = 40). For tibial bone-block fixation the graft was placed through the tunnel, and the screw was then inserted on the cancellous or the cortical surface, respectively. Fifteen knees were treated by staple fixation. A groove was created inferior to the tunnel outlet with a chisel. The bone block was fixed in this groove with two barbed stainless steel staples. Tensile testing in both groups was carried out under an axial load parallel to the tibial tunnel in a Zwick testing machine with a velocity of 1 mm/s. Dislocation of the graft and stiffness were calculated at 175 N load. Maximum load to failure using interference screws varied between 506 and 758 N. Load to failure using staples was 588 N. Dislocation of the graft ranged between 3.8 and 4.7 mm for interference screw fixation and was 4.7 mm for staples. Stiffness calculated at 175 N load was significantly higher in staple fixation. With either fixation technique, the recorded failure loads were sufficient to withstand the graft loads which are to be expected during the rehabilitation period. Staple fixation of the bone block outside of the tunnel resulted in a fixation strength comparable to interference screw fixation. Received: 2 September 1996 Accepted: 30 January 1997     

Interference screw fixation of soft tissue grafts in anterior cruciate ligament reconstruction: part 1: effect of tunnel compaction by serial dilators versus extraction drilling on the initial fixation strength

BACKGROUND: Compaction of the bone-tunnel walls by serial dilation is believed to enhance the interference screw fixation strength of the soft tissue grafts in anterior cruciate ligament (ACL) reconstruction. HYPOTHESIS: Serial dilation enhances the fixation strength of soft tissue grafts in ACL reconstruction over extraction drilling. STUDY DESIGN: Randomized experimental study. METHODS: Initial fixation strength of the doubled anterior tibialis tendon grafts (fixed with a bioabsorbable interference screw) was assessed in 21 pairs of human cadaver tibiae with either serially dilated or extraction-drilled bone tunnels. The specimens were subjected to a cyclic-loading test, and those surviving were then tested using the single-cycle load-to-failure test. RESULTS: During the cyclic-loading test, there were 3 fixation failures in the serially dilated and 6 failures in the extraction-drilled specimens but no significant stiffness or displacement differences between the groups. In the subsequent load-to-failure test, the average yield loads were 473 +/- 110 N and 480 +/- 115 N for the 2 groups respectively (P =.97) and no difference with regard to stiffness or mode of failure. CONCLUSIONS: Serial dilation does not increase the strength of interference fixation of soft tissue grafts in ACL reconstruction over extraction drilling. Clinical Relevance: The results of this experiment do not support the use of serial dilators in ACL reconstruction.     

A biomechanical evaluation of transcondylar femoral fixation of anterior cruciate ligament grafts

BACKGROUND: Interference screw fixation of the graft in anterior cruciate ligament reconstruction is considered the gold standard, but limited clinical experience suggests that transcondylar fixation is equally effective. PURPOSE: To compare transcondylar and interference screw fixation. STUDY DESIGN: Ex vivo biomechanical study. METHODS: Twenty pairs of unembalmed knees underwent anterior cruciate ligament reconstruction with patellar tendon autografts. In 1 knee of each pair, the bone plug was stabilized in the femoral tunnel with standard interference screws; in the other knee, transcondylar screws were used. Testing to failure occurred immediately or after 1000 cycles of sinusoidal loading (30 to 150 N) (20 paired reconstructions each). Fixation stiffness, strength, graft creep, displacement amplitude, and change in amplitude were measured and compared (repeated measures anaylsis of variance with Tukey test; P <.05). RESULTS: There was no significant difference in acute strength, maximum load within 3 mm, or stiffness between transcondylar fixation (410 +/- 164 N, 183 +/- 93 N, and 49.6 +/- 28 N/mm, respectively) and interference fixation (497 +/- 216 N, 206 +/- 115 N, and 61 +/- 37.8 N/mm, respectively). Similarly, there was no significant difference in cyclic strength, maximum load within 3 mm, or stiffness between transcondylar fixation (496 +/- 214 N, 357 +/- 82.9 N, and 110 +/- 27.4 N/mm, respectively) and interference fixation (552 +/- 233 N, 357 +/- 76.2 N, and 112 +/- 26.8 N/mm, respectively). Predominant modes of failure were bone plug pullout (transcondylar fixation) and tendon failure or bone plug fracture (interference fixation). CONCLUSIONS: Transcondylar screw fixation of the patellar tendon autograft into the femoral tunnel performed mechanically as well as interference screw fixation. CLINICAL RELEVANCE: The results suggest that transcondylar and interference screws provide similar fixation for anterior cruciate ligament reconstruction.     

Fixation strength of interference screw fixation in bovine,young human,and elderly human cadaver knees: Influence of insertion torque,tunnel-bone block gap,and interference

A failure analysis of interference screw fixation was performed to test the hypothesis that bovine and/or elderly human cadavers are appropriate models for bonepatellar tendon-bone anterior cruciate ligament (ACL) reconstruction fixation studies. Failure mode is an important criterion for validating experimental models. The bovine, young human, and elderly human failure loads were 799±261 N, 655±186 N, and 382±118 N, respectively, and the failure modes were 75%, 69%, and 30% tissue failures, respectively. The similarities between the bovine and young human models in failure loads and failure modes indicate that bovine models are appropriate for ACL reconstruction fixation studies. The statistically significant differences between the young human and elderly human models in failure loads and failure modes indicate that elderly human cadavers are not an appropriate model for ACL reconstruction fixation studies. The differences in failure modes are consistent with previous studies using elderly human cadavers in which the predominant failure mode was bone block pullout. The tissue failures observed in the bovine and young human models contradict previous studies suggesting fixation strength is the weakest link in bone-patellar tendon-bone ACL reconstruction. Results of linear regression modeling showed statistically significant correlations between insertion torque and failure load (R ²=0.44,P<0.0001) and interference (defined as the screw outer thread diameter minus the tunnel-bone block gap) and insertion torque (R ²=0.18,P=0.003) when data from all models was combined. Results for the bovine model multiple regression showed a statistically significant regression of insertion torque (linear) and interference (quadritic) versus failure load (R ²=0.56,P=0.02). Regression slopes for screw diameter (P=0.52) and gap size (P=1.00) were not statistically significant. These results indicate that insertion torque and interference are independent predictors of failure load and should be included in future interference screw studies in addition to bone block dimensions, tunnel size, gap size, and screw diameter. Clinicians may consider using insertion torque and interference as indicators of postoperative graft fixation regarding rehabilitation decisions.     

Graft choice and graft fixation in PCL reconstruction

Several grafts and several fixation techniques have been introduced for PCL reconstruction over the past years. To date, autograft and allograft tissues are recommended for PCL reconstruction, whilst synthetic grafts should be avoided. Autograft tissues include the bone-patellar tendon-bone graft, the hamstrings and the quadriceps tendon. Allograft tissues are increasingly being used for primary PCL reconstruction. The use of allograft tissues requires a number of formal prerequisites to be fulfilled. Besides the previous mentioned graft types allograft tissues include Achilles and tibialis anterior/posterior tendons. To date no superior graft type has been identified. Several techniques and devices have been used for fixation of a PCL replacement graft. Most of these were originally developed for ACL reconstruction and then adapted to PCL reconstruction. However, biomechanical requirements of the PCL differ substantially from those of the ACL. To date, requirements for PCL graft fixations are not known. From a systematic approach femoral graft fixation can either be achieved within the bone tunnel (nearly anatomic) with an interference screw or outside the bone tunnel on the medial femoral condyle using a staple, an endobutton or a screw. Tibial graft fixation can be achieved either with an interference screw in the bone tunnel or with a staple, screw/washer or sutures tied over a bone bridge outside the bone tunnel (extra-anatomic). An alternative fixation on the tibial side is the inlay technique that reduces the acute angulation of the graft at the posterior aspect of the tibia. Further research is necessary to identify the differences between the various fixation techniques.     

Anterior cruciate ligament reconstruction using hamstrings for a two-incision technique

Anterior cruciate ligament (ACL) reconstructions are most commonly performed through a single incision, using either a patellar tendon or a hamstring graft. This technique, however, may be problematic in circumstances such as revision ACL reconstructions or reconstructions in patients with open growth plates. In these cases, a second incision may be needed to avoid existing tunnels or an open physis. The two-incision ACL reconstruction technique described in this article incorporates a four-stranded, gracilis-semitendinosus graft. The four free tendon ends are fixed proximally in a figure-of eight fashion with two bicortical screws and soft tissue washers. The distal looped end is secured with three No. 5 sutures tied to a screw and post. This construct provides graft (2800–4500 N) and fixation (821 N) strengths exceeding that of a 10 mm patellar tendon graft with interference screw fixation. This technique allows for an accelerated rehabilitation program, has low graft harvest morbidity, and provides the freedom necessary for tunnel placement and orientation in complicated reconstructions. For these reasons, this technique should be familiar to surgeons specializing in knee ligament reconstruction.     

前交叉韧带重建术后三维MRI表现

目的 探讨前交叉韧带(ACL)重建术后ACL移植物和骨隧道的3D MRI表现和演变规律.方法 回顾性分析26例双束ACL重建和16例单束ACL重建患者行3D MRI术后随访56例次的资料,用多平面重组法显示和评价移植物、骨隧道、固定器及并发症,计算术后不同时期低信号及高信号移植物的比例和骨隧道周围骨髓水肿的出现率.结果 发现低信号移植物24例次,高信号移植物32例次.移植物固定2例股骨端采用横杆,1例股骨端使用纽扣,其余部位使用可吸收螺钉.术后3个月、6～9个月和12个月及以上低信号移植物比例分别为20/25、0/14和4/10,高信号移植物比例分别为5/25、14/14和6/10,骨隧道周围骨髓水肿出现比例分别为54/54、10/32和4/26.发现1例移植物撕裂,4例胫骨隧道偏前伴ACL移植物髁间窝顶撞击,3例股骨隧道偏前,2例可吸收螺钉与骨隧道不匹配.结论 3D MRI可准确显示ACL重建术后移植物、骨隧道和固定器的状态及并发症信息,移植物信号在术后呈先增高再恢复低信号的过程.