Analysis of isoaspartate in a recombinant monoclonal antibody and its charge isoforms

Monoclonal antibody (mAb) therapy applications have been growing rapidly in recent years. Like other proteins, therapeutic mAbs can under go various enzymatic and non-enzymatic reactions that can affect their structural integrity and stability. Among the degradation reactions, isoaspartate (isoAsp) formation is one of the major sources of charge heterogeneity of mAbs. This paper reports the detection and quantification of isoAsp in a recombinant mAb and its charge isoforms resolved by cation exchange high performance liquid chromatography. The assay utilizes the enzyme protein isoaspartyl methyltransferase in conjunction with strong cation exchange separation and UV detection (at 260 nm) of S-adenosyl-L-homocysteine, which is produced stoichiometrically in the enzymatic reaction. The mAb is found to contain an average 0.2 mol of isoAsp per mol of protein, however, various charge isoforms were found to contain different levels of isoAsp. The most acidic isoforms contain approximately 0.7 mol of isoAsp per mol of protein, and no isoAsp is detected in the most basic isoform. It appears that the majority of isoAsp in the mAb is formed as a result of asparagine deamidation.     

Complex Nature of Protein Carbonylation Specificity After Metal-Catalyzed Oxidation

Purpose

Protein carbonylation is an irreversible modification of Lys, Arg, Thr and Pro amino acids under conditions of oxidative stress. Previous studies have reported specific carbonylated residues in purified recombinant albumins, albeit with a lack of agreement between the studies. Currently, structural factors that determine site-specific protein carbonylation are not well understood.

Methods

In this study, we utilized metal-catalyzed oxidizing conditions to generate carbonylation in recombinant human serum albumin (HSA) and granulocyte-colony stimulating factor (G-CSF), two proteins with distinct metal-binding abilities. To estimate predictability of HSA carbonylation sites, the same oxidative reaction was repeated based on the previously reported conditions. For G-CSF, oxidative conditions were gradually adjusted to achieve substantial levels of protein carbonylation. Corresponding accumulation of specific oxidized residues was identified and confirmed with high-resolution mass spectrometry.

Results

Our HSA dataset contained 55 carbonylated residues and showed a significant overlap with the previously published pooled data, indicating a certain level of carbonylation site specificity for albumins. Oxidation of G-CSF under multiple oxidative conditions consistently showed a highly specific carbonylation at position Pro45. We also detected a previously unreported, oxidation-induced cleavage site in G-CSF between His44 and Pro45, which might be attributed to a presence of a potential metal-binding site near residue Pro45.

Conclusions

Our results show distinct patterns of protein carbonylation for HSA and G-CSF. Thus, specificity of protein carbonylation induced by metal-catalyzed oxidation is protein dependent and might be predicted by availability of transition metal binding site(s) within the protein.

     

Characterization of site-specific glycation during process development of a human therapeutic monoclonal antibody

A therapeutic recombinant monoclonal antibody (mAb1) was found to be highly susceptible to glycation during production. Up to 42% glycation was observed in mAb1, which was significantly greater than the glycation observed in 17 other monoclonal antibodies (mAbs). The majority of the glycation was localized to lysine 98 of a unique sequence in the heavy chain complementarity determining region 3. Upon incubation with 5% glucose at 37 °C for 5 days, the level of glycation rose to 80% of the total protein where the majority of the additional glycation was on the lysine 98 residue. These data suggested that the lysine 98 residue was highly susceptible to glycation. However, three other mAbs with a lysine residue in the same position did not show high rates of glycation in the forced glycation assay, suggesting that primary and perhaps secondary structural constraints could contribute to the rate of glycation at that lysine. Interestingly, a portion of the glycation in mAb1 was found to be reversible and upon incubation in phosphate buffer (pH 7) at 37 °C for 5 days, the glycation dropped from starting levels of 42% to 20%. Variation was observed in the total glycation levels between different lots of mAb1. The variability in glycation introduced charge heterogeneity in the form of an acidic peak on cation exchange chromatography and lead to product inconsistency. Mutation of lysine 98 to arginine reduced the starting level of glycation without any impact on potency.     

Developability Assessments of Monoclonal Antibody Candidates to Minimize Aggregation During Large-Scale Ultrafiltration and Diafiltration (UF-DF) Processing

Therapeutic proteins are subjected to a variety of stresses during manufacturing, storage or administration, that often lead to undesired protein aggregation and particle formation. Ultrafiltration-diafiltration (UF-DF) processing of monoclonal antibodies (mAbs) is one such manufacturing step that has been shown to result in such physical degradation. In this work, we explore the use of different analytical techniques and lab-scale setups as methodologies to predict and rank-order the aggregation potential of four different mAbs during large-scale UF-DF processing. In the first part of the study, a suite of biophysical techniques was applied to assess differences in their inherent bulk protein properties including conformational and colloidal stability in a PBS buffer. Additionally, the inherent interfacial properties of these mAbs in PBS were measured using a Langmuir trough technique. In the next part of the study, several different scale-down lab models were evaluated including a lab bench-scale UF-DF setup, mechanical stress (shaking/stirring) studies in vials, and application of interfacial dilatational stress using a Langmuir trough to assess protein particle formation in different UF-DF processing buffers. Taken together, our results demonstrate the ability of a Langmuir-trough methodology to accurately predict the mAb instability profile observed during large scale UF-DF processing.     

Freeze-Dried Monoclonal Antibody Formulations are Unexpectedly More Prone to Degradation Than Liquid Formulations Under Shaking Stress

Liquid biopharmaceuticals including monoclonal antibodies (mAbs) have been widely acknowledged to undergo various stresses during shipping/handling and long-term storage. Several mechanical stresses including shaking during shipping has been widely known to cause protein aggregation and sub-visible particle (SbVP) formation in liquid biopharmaceutical formulations. However, shaking-induced degradation of freeze-dried (FD) biopharmaceuticals has seldomly been reported in the literature and therefore this type of stress is widely overlooked in industry due to their presumed high stability, especially when the formulations and freeze-drying processes are fully optimized. In this Lessons Learned article, we report an interesting phenomenon in which the optimized FD biopharmaceutical formulations of three typical mAbs showed much degradation and SbVP formation under shaking stress compared with their liquid counterparts. This is a striking deviation to the notion that mAbs are generally more stable in the FD formulations than in the liquid ones. Therefore, shaking stress experiment should be considered a critical stress condition for early-stage selection of liquid versus FD mAb formulations.     

Aggregation Kinetics for IgG1-Based Monoclonal Antibody Therapeutics

Monoclonal antibodies (mAbs) as a class of therapeutic molecules are finding an increasing demand in the biotechnology industry for the treatment of diseases like cancer and multiple sclerosis. A key challenge associated to successful commercialization of mAbs is that from the various physical and chemical instabilities that are inherent to these molecules. Out of all probable instabilities, aggregation of mAbs has been a major problem that has been associated with a change in the protein structure and is a hurdle in various upstream and downstream processes. It can stimulate immune response causing protein misfolding having deleterious and harmful effects inside a cell. Also, the extra cost incurred to remove aggregated mAbs from the rest of the batch is huge. Size exclusion chromatography (SEC) is a major technique for characterizing aggregation in mAbs where change in the aggregates’ size over time is estimated. The current project is an attempt to understand the rate and mechanism of formation of higher order oligomers when subjected to different environmental conditions such as buffer type, temperature, pH, and salt concentration. The results will be useful in avoiding the product exposure to conditions that can induce aggregation during upstream, downstream, and storage process. Extended Lumry-Eyring model (ELE), Lumry-Eyring Native Polymerization model (LENP), and Finke-Watzky model (F-W) have been employed in this work to fit the aggregation experimental data and results are compared to find the best fit model for mAb aggregation to connect the theoretical dots with the reality.     

Evaluation of a non-Arrhenius model for therapeutic monoclonal antibody aggregation

Understanding antibody aggregation is of great significance for the pharmaceutical industry. We studied the aggregation of five different therapeutic monoclonal antibodies (mAbs) with size-exclusion chromatography-high-performance liquid chromatography (SEC-HPLC), fluorescence spectroscopy, electron microscopy, and light scattering methods at various temperatures with the aim of gaining insight into the aggregation process and developing models of it. In particular, we find that the kinetics can be described by a second-order model and are non-Arrhenius. Thus, we develop a non-Arrhenius model to connect accelerated aggregation experiments at high temperature to long-term storage experiments at low temperature. We evaluate our model by predicting mAb aggregation and comparing it with long-term behavior. Our results suggest that the number of monomers and mAb conformations within aggregates vary with the size and age of the aggregates, and that only certain sizes of aggregates are populated in the solution. We also propose a kinetic model based on conformational changes of proteins and monomer peak loss kinetics from SEC-HPLC. This model could be employed for a detail analysis of mAb aggregation kinetics.     

Identification of Stability Constraints in the Particle Engineering of an Inhaled Monoclonal Antibody Dried Powder

Monoclonal antibody (mAb) based therapies may provide a valuable new treatment modality for acute and chronic lung diseases, including asthma, respiratory infections, and lung cancer. Currently mAbs are delivered via systemic administration routes, but direct delivery to the lungs via the inhaled route could provide higher concentrations at the site of disease and reduced off-target effects. Though lyophilized mAbs may be reconstituted and delivered to the lungs using nebulizers, dry powder inhalers provide a more patient-friendly delivery method based upon their fast administration time and portability. However, particle engineering processes required to prepare respirable dried powders for DPI delivery involve multiple potential stressors for mAbs, which have not been fully explored. In this study, a systematic examination of various aspects of the particle engineering process (atomization, freezing, drying, and storage) was performed to further understand their impact on mAb structure and aggregation. Using anti-streptavidin IgG1 as a model mAb, atomization settings were optimized using a design of experiments approach to elucidate the relationship between feed flow rate, formulation solid content, and atomization airflow rate and protein structural changes and aggregation. The optimized atomization conditions were then applied to spray drying and spray freezing drying particle engineering processes to determine the effects of freezing and drying on IgG1 stability and aerosol performance of the powders. IgG1 was found to be particularly susceptible to degradation induced by the expansive air-ice interface generated by spray freeze drying and this process also produced powders that exhibited decreased storage stability. This study further delineates the design space for manufacturing of respirable biologic therapies and is intended to serve as a roadmap for future development work.     

Stability of monoclonal antibodies after simulated subcutaneous administration

Changes in the environment from the drug product to the human physiology might lead to physical and/or chemical modifications of the protein drug, such as in vivo aggregation and fragmentation. Although subcutaneous (SC) injection is a common route of administration for therapeutic proteins, knowledge on in vivo stability in the SC tissue is limited. In this study, we developed a physiologic in vitro model simulating the SC environment in patients. We assessed the stability of two monoclonal antibodies (mAbs) in four different protein-free fluids under physiologic conditions. We monitored protein stability over two weeks using a range of analytical methods, in analogy to testing purposes of a drug product. Both mAbs showed an increase of protein aggregates, fragments, and acidic species. mAb1 was consistently more stable in this in vitro model than mAb2, highlighting the importance of comparing the stability of different mAbs under physiologic conditions. Throughout the study, both mAbs were substantially less stable in bicarbonate buffers as compared to phosphate-buffered saline. In summary, our developed model was able to differentiate stability between molecules. Bicarbonate buffers were more suitable compared to phosphate-buffered saline in regards to simulating the in vivo conditions and evaluating protein liabilities.     

分析单克隆抗体电荷异质性的成像毛细管等电聚焦电泳技术平台方法的建立

目的  采用成像毛细管等电聚焦电泳技术（imaged capillary isoelectric focusing, iCIEF）建立分析单克隆抗体（单抗）电荷异质性的平台方法,并用不同亚型单抗（IgG1、IgG2、IgG4）确认该平台方法的适用性。方法  优化该平台方法的部分参数,包括两性电解质和阴极稳定剂体积、聚焦时间和尿素浓度。采用3种亚型单抗（IgG1、IgG2、IgG4）对该平台方法的专属性、精密度、线性、准确度和耐用性进行验证。结果   对样品（单抗）的处理条件为：3 mol/L尿素-0.5%甲基纤维素溶液70 μl、两性电解质（pH3~10）4 μl、阴极稳定剂（500 mmol/L 精氨酸）2 μl、等电点 6.14和9.99 Marker 各2 μl,最终完成0.2 mg/ml单抗（样品）的制备。检测参数：预聚焦1 500 V、1 min,聚焦3 000 V、8 min。该平台方法的专属性良好,制剂缓冲液对检测无干扰。重复检测6份平行样品以及不同分析员于不同时间检测12份样品各成分含量的相对标准偏差均符合规定的要求。单抗（样品）终浓度为0.1～0.3 mg/ml时,主要和酸性成分的线性决定系数（R2）≥0.99,碱性成分的线性R2≥0.98。该平台方法检测样品各成分的准确度为92～105%。耐用性实验设计结果表明,两性电解质（pH3~10）体积和毛细管批次对该平台方法有显著影响。结论  建立的iCIEF平台方法分离度较高,精密度、准确度和耐用性良好,为单抗制品的电荷异质性表征和质量控制提供了更有效的工具。     

In-Use Interfacial Stability of Monoclonal Antibody Formulations Diluted in Saline i.v. Bags

The use of monoclonal antibodies (mAbs) for the treatment of a variety of diseases is rapidly growing each year. Many mAbs are administered intravenously using i.v. bags containing 0.9% NaCl (normal saline). We studied the aggregation propensity of these antibody solutions in saline and compared it with a low ionic strength formulation buffer. The mAb studied in this work is prone to aggregate, and is known to form a viscoelastic network at the air-solution interface. We observed that this interfacial elasticity increased when formulated in saline. In the bulk, the mAbs exhibited a tendency to self-associate that was higher in saline. We also studied the aggregation of the mAbs in the presence of polysorbate-20, typically added to formulations to mitigate interfacial aggregation. We observed that with surfactants, the presence of salt in the buffer led to a greater mAb adsorption at the interface and resulted in the formation of more particulate aggregates. Our results show that the addition of salt to the buffer led to differences in the interfacial aggregation in mAb formulations, showing that stress studies used to screen for mAb aggregation intended for i.v. administration should be performed in conditions representative of their intended route of administration.     

Oxidation and Deamidation of Monoclonal Antibody Products: Potential Impact on Stability,Biological Activity,and Efficacy

The role in human health of therapeutic proteins in general, and monoclonal antibodies (mAbs) in particular, has been significant and is continuously evolving. A considerable amount of time and resources are invested first in mAb product development and then in clinical examination of the product. Physical and chemical degradation can occur during manufacturing, processing, storage, handling, and administration. Therapeutic proteins may undergo various chemical degradation processes, including oxidation, deamidation, isomerization, hydrolysis, deglycosylation, racemization, disulfide bond breakage and formation, Maillard reaction, and β-elimination. Oxidation and deamidation are the most common chemical degradation processes of mAbs, which may result in changes in physical properties, such as hydrophobicity, charge, secondary or/and tertiary structure, and may lower the thermodynamic or kinetic barrier to unfold. This may predispose the product to aggregation and other chemical modifications, which can alter the binding affinity, half-life, and efficacy of the product. This review summarizes major findings from the past decade on the impact of oxidation and deamidation on the stability, biological activity, and efficacy of mAb products. Mechanisms of action, influencing factors, characterization tools, clinical impact, and risk mitigation strategies have been addressed.     

Construction and characterization of monoclonal antibodies against the extracellular domain of B-lymphocyte antigen CD20 using DNA immunization method

To date, several new anti-CD20 monoclonal antibodies (mAbs) have been developed for potential efficacies compared with familiar mAb rituximab. Despite the recent advances in development of anti-CD20 mAbs for the treatment of B cell malignancies, the efforts should be continued to develop novel antibodies with improved properties. However, the development of mAbs against CD20 as a multi-transmembrane protein is challenging due to the difficulty of providing a lipid environment that can maintain native epitopes. To overcome this limitation, we describe a simple and efficient DNA immunization strategy for the construction of a novel anti-CD20 mAb with improved anti-tumour properties. Using a DNA immunization strategy that includes intradermal (i.d.) immunization with naked plasmid DNA encoding the CD20 gene, we generated the hybridoma cell line D4, which secretes functional mAbs against an extracellular epitope of CD20. Immunocytochemistry analysis and a cell-based enzyme-linked immunosorbent assay using a Burkitt's lymphoma cell line showed that D4 mAbs are capable of binding to native extracellular epitopes of CD20. Moreover, the binding specificity of D4 mAbs was determined by western blot analysis. Cell proliferation was examined by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Apoptosis was detected by the annexin V/propidium iodide staining and dye exclusion assay. The results showed that D4 anti-CD20 mAbs produced by DNA immunization exhibit potent growth inhibitory activity and have superior direct B-cell cytotoxicity compared to rituximab. We propose that antibody-induced apoptosis is one of the mechanisms of cell growth inhibition. Taken together, the data reported here open the path to DNA-based immunization for generating pharmacologically active monoclonal antibodies against CD20. In addition, the data support future in vivo animal testing and subsequent procedures to produce a potential therapeutic mAb.     

重组抗人表皮生长因子受体2单克隆抗体的电荷异质体分析

目的  探讨重组抗人表皮生长因子受体2（human epidermal growth factor receptor 2,Her2）单克隆抗体（单抗）的酸碱异质体对其生物活性和亲和力的影响。方法  分别用过氧化氢、肽-N-糖苷酶F、羧肽酶B对抗Her2单抗进行氧化、脱糖、酶切处理。用阳离子交换高效液相色谱法和毛细管等电聚焦电泳分析抗Her2单抗的电荷异质体,使用微量差示扫描荧光法分析抗Her2单抗的热稳定性,用细胞增殖抑制法和表面等离激元共振技术分析抗Her2单抗的亲和力。结果  脱糖处理抗Her2单抗的酸性电荷异质体增加了5.58%,与免疫球蛋白G Fc受体1（high affinity immunoglobulin gamma Fc receptor Ⅰ,FcGR1A）的亲和力明显减弱,亲和力常数为9.032×10^-8 mol/L。氧化和酶切处理抗Her2单抗的热稳定性降低,去折叠温度分别为63.6和59.5 ℃,均低于未处理抗Her2单抗（66.7 ℃）。结论  3种处理均会使抗Her2单抗产生电荷异质性,脱糖处理抗Her2单抗与FcGR1A的亲和力减弱,氧化和酶切处理抗Her2单抗的热稳定性降低。     

Evaluating the Combined Impact of Temperature and Application of Interfacial Dilatational Stresses on Surface-mediated Protein Particle Formation in Monoclonal Antibody Formulations

Formation of submicron and subvisible protein particles (0.1–100 μm) present a major obstacle during processing and storage of therapeutic proteins. While protein aggregation resulting in particle formation is well-understood in bulk solution, the mechanisms of aggregation due to interfacial stresses is less understood. Particularly, in this study, we focus on understanding the combined effect of temperature and application of interfacial dilatational stresses, on interface-induced protein particle formation, using two industrially relevant monoclonal antibodies (mAbs). The surface activity of Molecule C (MC) and Molecule B (MB) were measured at room temperature (RT) and 4 °C in the absence and presence of interfacial dilatation stress using a Langmuir trough. These results were correlated with Micro-flow imaging (MFI) to characterize formation of subvisible protein particles at the interface and in the bulk solution. Our results show that the surface activity for both proteins is temperature dependent. However, the extent of the impact of temperature on the mechanical properties of the monomolecular protein films when subjected to dilatational stresses is protein dependent. Protein particle analysis provided evidence that protein particles formed in bulk solution originate at the interface and are dependent on both application of thermal stresses and interfacial dilatational stresses. In the absence of any interfacial stresses, more and larger protein particles were formed at the interface at RT than at 4 °C. When mAb formulations are subjected to interfacial dilatational stresses, protein particle formation in bulk solution was found to be temperature dependent. Together our results validate that mAb solutions maintained at 4 °C can lower the surface activity of proteins and reduce their tendency to form interface-induced protein particles both in the absence and presence of interfacial dilatational stresses.     

Concentration Dependent Viscosity of Monoclonal Antibody Solutions: Explaining Experimental Behavior in Terms of Molecular Properties

Purpose

Early identification of monoclonal antibody candidates whose development, as high concentration (≥100 mg/mL) drug products, could prove challenging, due to high viscosity, can help define strategies for candidate engineering and selection.

Methods

Concentration dependent viscosities of 11 proprietary mAbs were measured. Sequence and structural features of the variable (Fv) regions were analyzed to understand viscosity behavior of the mAbs. Coarse-grained molecular simulations of two problematic mAbs were compared with that of a well behaved mAb.

Results

Net charge, ξ-potential and pI of Fv regions were found to correlate with viscosities of highly concentrated antibody solutions. Negative net charges on the Fv regions of two mAbs with poor viscosity behaviors facilitate attractive self-associations, causing them to diffuse slower than a well-behaved mAb with positive net charge on its Fv region. An empirically derived equation that connects aggregation propensity and pI of the Fv region with high concentration viscosity of the whole mAb was developed.

Conclusions

An Fv region-based qualitative screening profile was devised to flag mAb candidates whose development, as high concentration drug products, could prove challenging. This screen can facilitate developability risk assessment and mitigation strategies for antibody based therapeutics via rapid high throughput material-free screening.     

Deciphering the High Viscosity of a Therapeutic Monoclonal Antibody in High Concentration Formulations by Microdialysis-Hydrogen/Deuterium Exchange Mass Spectrometry

High concentration formulations of therapeutic monoclonal antibodies (mAbs) are highly desired for subcutaneous injection. However, high concentration formulations can exhibit unusual molecular behaviors, such as high viscosity or aggregation, that present challenges for manufacturing and administration. To understand the molecular mechanism of the high viscosity exhibited by high concentration protein formulations, we analyzed a human IgG4 (mAb1) at high protein concentrations using sedimentation velocity analytical ultracentrifugation (SV-AUC), X-ray crystallography, hydrogen/deuterium exchange mass spectrometry (HDX-MS), and protein surface patches analysis. Particularly, we developed a microdialysis HDX-MS method to determine intermolecular interactions at different protein concentrations. SV-AUC revealed that mAb1 displayed a propensity for self-association of Fab-Fab, Fab-Fc, and Fc-Fc. mAb1 crystal structure and HDX-MS results demonstrated self-association between complementarity-determining regions (CDRs) and Fc through electrostatic interactions. HDX-MS also indicated Fab-Fab interactions through hydrophobic surface patches constructed by mAb1 CDRs. Our multi-method approach, including fast screening of SV-AUC as well as interface analysis by X-ray crystallography and HDX-MS, helped to elucidate the high viscosity of mAb1 at high concentrations as induced by self-associations of Fab-Fc and Fab-Fab.     

High Throughput Prediction Approach for Monoclonal Antibody Aggregation at High Concentration

Purpose

Characterization of the monoclonal antibody aggregation process and identification of stability factors that could be used as indicators of aggregation propensity with an emphasis on a large number of samples and low protein material consumption.

Methods

Differential scanning calorimetry, dynamic light scattering and size exclusion chromatography were used as the main methodological approaches. Conformational stability, colloidal stability and aggregation kinetics were assessed for two different IgG monoclonal antibody (mAbs) subclasses. Aggregation was induced by exposing the mAbs to 55°C for 3 weeks. mAb samples were prepared in different formulations and concentrations from 1 mg/mL to 50 mg/mL.

Results

High temperature stress of mAb samples revealed that monoclonal antibodies followed first order aggregation kinetics, which suggests that the rate-limiting step of monomer loss was unimolecular. Conformational stability of mAbs was estimated with denaturation temperature measurements. Colloidal stability was assessed with dynamic interaction parameter k _D . The correlation between aggregation kinetics and colloidal and conformational stability factors was evaluated and the dynamic interaction parameter was found to be a promising predictor of aggregation propensity of monoclonal antibodies. The meaning of using an intermolecular interaction parameter for prediction of what is essentially a unimolecular process is also discussed.

Conclusions

This work estimates the significance of different predictors of aggregation propensity at high concentrations as a part of a high throughput, low resource screening method and is a contribution towards determining protein aggregation phenomena in actual systems used for the development and production of biopharmaceuticals.

     

Laser-induced breakdown detection of temperature-ramp generated aggregates of therapeutic monoclonal antibody

The detection and characterization of protein aggregation is essential during development and quality control of therapeutic proteins, as aggregates are typically inactive and may trigger anti-drug-antibody formation in patients. Especially large multi-domain molecules, such as the important class of therapeutic monoclonal antibodies (mAbs), can form various aggregates that differ in size and morphology. Although particle analysis advanced over the recent years, new techniques and orthogonal methods are highly valued. To our knowledge, the physical principle of laser-induced breakdown detection (LIBD) was not yet applied to sense aggregates in therapeutic protein formulations. We established a LIBD setup to monitor the temperature-induced aggregation of a mAb. The obtained temperature of aggregation was in good agreement with the results from previously published temperature-ramped turbidity and dynamic light scattering measurements. This study demonstrates the promising applicability of LIBD to investigate aggregates from therapeutic proteins. The technique is also adaptive to online detection and size determination, and offers interesting opportunities for morphologic characterization of protein particles and impurities, which will be part of future studies.     

TMVA, a snake C-type lectin-like protein from Trimeresurus mucrosquamatus venom, activates platelet via GPIb.

TMVA is a C-type lectin-like protein with potent platelet activating activity from Trimeresurus mucrosquamatus venom. In the absence of von Willebrand factor (vWF), TMVA dose-dependently induced aggregation of washed platelets. Anti-GP Ib monoclonal antibodies (mAbs), HIP1, specifically inhibited TMVA-induced aggregation in a dose-dependent manner. The aggregation was also inhibited by mAb P2 (an anti-GP IIb mAb). Flow cytometric analysis revealed that FITC-TMVA bound to human formalin-fixed platelets in a saturable manner, and its binding was specifically blocked by HIP1 in a dose-dependent manner. Flow cytometric analysis showed that TMVA did not bind to platelet GPIX, GPIIb, GPIIIa, GPIa, GPIIa and GPIV. Moreover, the platelet aggregation induced by TMVA was partially inhibited when platelet was pretreated with mocarhagin, a snake venom protease that specifically cleaves human GPIb. These results suggest that TMVA is a strong platelet agonist via GPIb and it might have multiple functional binding-sites on GPIb molecule or on other unknown receptor.