Effect of different initial light intensity by the soft-start photoactivation on the bond strength and Knoop hardness of a dental composite

This study evaluated the bond strength (push-out method) and Knoop hardness of Z250 composite resin, photoactivated with XL 2500 curing unit, using different protocols: continuous mode (700mW/cm(2) for 20s) (CO); soft-start (50 mW/cm(2) for 5 s, followed by 700 mW/cm(2) for 15 s) (SS1); soft-start (100 mW/cm(2) for 5 s, followed by 700 mW/cm(2) for 15 s) (SS2); soft-start (150 mW/cm(2) for 5 s, followed by 700mW/cm(2) for 15s) (SS3); soft-start (200mW/cm(2) for 5s, followed by 700mW/cm(2) for 15s) (SS4); soft-start (250mW/cm(2) for 5 s, followed by 700 mW/cm(2) for 15 s) (SS5); soft-start (300 mW/cm(2) for 5 s, followed by 700 mW/cm(2) for 15 s) (SS6). For the push-out test, the specimens were tested in a universal testing machine at a crosshead speed of 0.5 mm/min. For the hardness test, the specimens were polished for the hardness measurements, using a 50 g load for 15 s. Data were submitted to ANOVA and Tukey's test (alpha=5%). The results of bond strength showed that the SS3 group obtained the highest bond strength when compared to the CO group. There were no significant differences among the other modes in relation to the other groups. Regarding the other results in hardness, there were no significant differences among the groups in the surface region and up to 4 mm depth.     

The role of dentist, practice and patient factors in the provision of dental services

OBJECTIVES: Service provision varies by dentist, practice and patient factors. However, limited subsets of these potential influences on service rates have been explored. More comprehensive models could improve our understanding of the factors influencing the pattern of care delivered. The aim of this study was to examine variation in dental services by dentist (treatment choice, practice beliefs, preferences for patients, demographics), practice (type, location, size and volume of practice) and patient (visit, demographic, oral health and socio-economic) characteristics. METHODS: A random sample of Australian dentists was surveyed in 1997-98 (response rate=60.3%). Private general practitioners (n=345) provided dentist and practice data, and service provision and patient variables were collected from a log of a typical clinical day (n=4,115 patients). Multivariate negative binomial regression models were fitted for diagnostic, preventive, restorative, extraction and prosthodontic services. RESULTS: Significant dentist factors included (P<0.05; RR=rate ratio): lower diagnostic rates (RR=0.78) for dentists with stronger practice beliefs for giving information about cost and treatment options; preventive rates were lower (RR=0.74) for male dentists and higher (RR=1.48) for younger dentists aged 20-29 years; restorative rates were higher (RR=1.27) for dentists that rated patient preferences more highly in treatment choice and in the dentist age group 30-39 years (RR=1.25); extraction rates were lower (RR=0.61) for dentists with stronger preferences for patients that would adhere with treatment but higher (RR=1.57) for dentists with stronger preferences for sociable patients; and prosthodontic rates were lower (RR=0.38) for dentists with stronger preferences for adaptable patients who were willing to cooperate when expected to do so. Practice factors included: higher preventive (RR=1.28) and prosthodontic rates (RR=2.07) in solo practice; higher preventive (RR=1.34) but lower prosthodontic rates (RR=0.42) in capital cities; lower diagnostic (RR=0.82) and extraction rates (RR=0.55) in practices with fewer other dentists; higher diagnostic (RR=1.33) and extraction (RR=1.62) rates but lower restorative rates (RR=0.84) in practices with lower patient visits per year. Patient factors included: lower preventive (RR=0.76) but higher extraction rates (RR=1.45) for emergency visits; lower extraction rates (RR=0.60) for the insured; higher diagnostic rates (RR=1.17) for new patients; higher restorative (RR=1.31) but lower prosthodontic rates (RR=0.46) for patients with decayed teeth; higher prosthodontic rates (RR=2.14) for those with dentures; and lower preventive (RR=0.66), but higher extraction (RR=2.22) and prosthodontic rates (RR=1.82) for patients from lower socio-economic status areas. CONCLUSIONS: Dental service rates were influenced by large number of small effects from a wide range of dentist, practice and patient factors. Socio-economic and geographic barriers may need broad policy innovations to be addressed, but factors such as insurance and visit type have the potential to be altered to achieve better service outcomes and there is scope for research into clinical outcomes to improve the knowledge upon which treatment decisions are based.     

Techniques for dissection of the facial nerve in benign parotid surgery: a cross specialty survey of oral and maxillofacial and ear nose and throat surgeons in the UK

We investigated techniques of dissection of the facial nerve currently being used in parotid surgery for benign disease in oral and maxillofacial (OMF) and ear, nose and throat (ENT) surgery. A postal questionnaire was sent to 300 OMF and 300 ENT consultants and 49% were returned(171(57%) OMF and 123 (41%) ENT. The antegrade technique was used routinely by 209 surgeons (87%), the retrograde technique by 9 (4%), and both techniques combined by 21 surgeons (9%). The antegrade technique was used by 135 surgeons (56%) for revision parotidectomy, by 193 (81%) for limited superficial parotidectomy, by 173 (72%) for obese patients with large tumours and by 75 (31%) for injury to the facial nerve. The retrograde technique was used by 21 surgeons (9%) for revision parotidectomy, by 22 (9%) for limited superficial parotidectomy, by 15 (6%) for obese patients with large tumours and by 29 surgeons (12%) for injury to the facial nerve. A combination of techniques was chosen by 83 surgeons (35%) in revision parotidectomy, by 24 surgeons (10%) in limited superficial parotidectomy, by 51 surgeons (21%) in obese patients with large tumours and by (56%) surgeons 135 for injury to the facial nerve.     

Foundation restorations in fixed prosthodontics: current knowledge and future needs

PURPOSE: The Ad Hoc Committee on Research in Fixed Prosthodontics established by the Academy of Fixed Prosthodontics publishes a yearly comprehensive literature review on a selected topic. The subject for this year is foundation restorations. METHODS: Literature of various in vitro and in vivo investigations that included technical and clinical articles was reviewed to provide clinical guidelines for the dentist when selecting methods and materials for restoration of structurally compromised teeth. Topics discussed and critically reviewed include: (1) desirable features of foundation restorations, (2) foundations for pulpless teeth, (3) historic perspectives, (4) cast posts and cores, (5) role of the ferrule effect, (6) prefabricated posts, (7) direct cores, (8) foundation restorations for severely compromised teeth, (9) problems and limitations, (10) future needs, and (11) directions for future research. CONCLUSION: This comprehensive review brings together literature from a variety of in vitro and in vivo studies, along with technique articles and clinical reports to provide meaningful guidelines for the dentist when selecting methods and materials for the restoration of structurally compromised teeth.     

Rinsing with alcohol-free or alcohol-based chlorhexidine solutions after periodontal surgery. A double-blind, randomized, cross-over, pilot study

The aim of this randomized, double-blind, cross-over pilot study was to evaluate the effect on plaque formation and patient experience of rinsing after periodontal surgery using chlorhexidine solution with or without alcohol. Twenty patients refrained from tooth brushing after surgery and used two mouth rinses.Ten patients used alcohol-based (AB) 0.1% and another ten used alcohol-free (AF) 0.12% chlorhexidine (CHX). Sutures were removed after 2 weeks and teeth were cleaned; thereafter, the two groups shifted solution. Plaque at operated teeth was recorded at 2 and 4 weeks (Quigley-Hein Index). Patient experience was assessed with a visual analogue scale (0-10). Mean (SD) plaque indices at 2 and 4 weeks were 1.0 (0.8) and 1.1 (1.0) for AB CHX and 1.1 (0.7) and 0.8 (0.7) for AF CHX, respectively (no significant differences between solutions). At 2 weeks, between-group differences in taste experience of the solutions differed non-significantly: 6.1 (2.8) for AB and 6.0 (2.3) for AF. At 4 weeks, values were 4.6 (2.5) for AB and 6.9 (3.3) for AF-patients tended to prefer AF (p = 0.050). Taste change over the study period was equal for both groups: -37 (3.3) for AB and 3.4 (2.3) for AF at 2 weeks and slightly higher at 4 weeks 4.9 (2.8) and 4.5 (2.5) for AB and AF, respectively. Smarting was low in both groups: 2.2 (3.2) and 1.3 (2.2) for AB and 1.0 (1.5) and 1.9 (2.0) for AF at 2 and 4 weeks, respectively. To conclude, alcohol-free and alcohol-based chlorhexidine showed the same plaque inhibitory effect in periodontal patients after periodontal surgery. Both rinses were well tolerated by the patients.     

Studies on MMA-tBB resin. I. Comparison of TBB and other initiators in the polymerization of PMMA/MMA resin

Polymerization characteristics of poly (methyl methacrylate)(PMMA)/(methyl methacrylate) (MMA) resin initiated by tributylborane (TBB) were compared with those by benzoyl peroxide (BPO)/N,N-dimethyl-p-toluidine and camphorquinone (CQ)/N,N-dimethylaminoethyl methacrylate from the aspects of temporal changes of residual MMA and molecular weight up to 4 weeks at 37 degrees C. Residual MMA 30 min after polymerization decreased from 8.15% for TBB resin, 8.39% for the BPO resin, and 9.19% for the CQ resin to 0.48%, 3.54%, and 6.79%, respectively, after 4 weeks. The molecular weights at 30 min and 4 weeks after polymerization were 409 x 10(3) and 247 x 10(3) for TBB resin, 297 x 10(3) and 282 x 10(3) for the BPO resin, and 267 x 10(3) and 231 x 10(3) for the CQ resin, respectively. The present results revealed that the TBB-initiated polymerization had unique and different characteristics compared with those initiated by the other common initiators: (1) The decrease in residual MMA was fast, sustained for a long time and resulted in very low value; (2) high molecular weight PMMA was formed first and then decreased with time.     

Immediate restoration of pulpless teeth

A technique for the fabrication of immediate composite-resin cores retained by Para-post and/or T.M.S. pin(s) has been described. It affords the following advantages: (1) It is timesaving; (2) it is economical; (3) it provides substance for an immediate tooth preparation where little or no coronal tooth structure remains; (4) it simplifies the making of temporary crowns by providing a retentive tooth preparation; (5) it provides the opportunity for making the impression for the permanent crown at the same time the resin is inserted, if the marginal gingiva is healthy; (6) it assures good marginal adaptation of the core to the adjacent tooth surfaces; (7) the nonparallelism of the post(s) and pin(s) enhances the retention of the core.     

Work of adhesion of resin on treated lithia disilicate-based ceramic.

OBJECTIVE: This study is to test the hypothesis that chemical etching and silane coating of a ceramic surface will influence the work of adhesion (WA) of adhesive resin to dental ceramic. METHODS: A hot-pressed lithia disilicate-based ceramic was used as a model material to investigate the influence of probing media and surface treatments on WA using a dynamic contact angle analyzer. Eighty ceramic specimens were randomly divided into eight experimental groups and treated as follows: (1 and 3) as polished; (2 and 4) etched with 9.5% hydrofluoric acid (HF) for 1 min; (5) etched with 4% acidulated phosphate fluoride (APF) for 2 min; (6) silane coated; (7) etched with HF for 1 min and silane coated; (8) etched with APF for 2 min and silane coated. Advancing and receding contact angles (theta(a) and theta(r)) were measured using high purity water (gamma = 72.6 mN/m) for groups 1 and 2, and a liquid resin (gamma = 39.7) for groups 3-8 as probing liquids. RESULTS: The liquid resin medium yielded a lower WA than water. Silanization produced a significantly lower WA (p < 0.001) than non-silanated surfaces. Etching alone consistently yielded a greater WA for all surface treatments (p < 0.001). SIGNIFICANCE: The silanated ceramic surface exhibited a lower surface energy and did not enhance bonding to the liquid resin by work of adhesion.     

Quality of written communication and master impressions for fabrication of removable partial prostheses in the Kingdom of Bahrain

The aim of this study was to examine the quality of written instructions and choice of impression trays and materials for removable partial dentures (RPDs) in the Kingdom of Bahrain. All six private dental laboratories in Bahrain were contacted and invited to participate in the study. Five laboratories participated, and submitted written instructions received by them for fabrication of both acrylic (A-RPDs) and cobalt-chromium (CC-RPDs) RPDs. These were examined for evidence of selected design variables. Types of impression trays and materials used were also recorded. One hundred and thirty-one written instructions were examined. Eleven percent (n = 14) were for CC-RPDs, 89% (n = 117) for A-RPDs. All treatments were provided on a private basis. Fifty-seven percent (n =1 8) of CC-RPD instructions requested the technician to design the prosthesis, 43% (n = 6) contained a diagram and 43% (n = 6) mentioned all design variables. Seventy-nine percent (n = 92) of A-RPDs requested the technician to design the denture, and only 1% (n = 1) mentioned all design variables. Alginate impression material was most commonly used for master impressions (83% of impressions (n = 109); 85% (n = 99) of A-RPDs, and 71% (n = 10) of CC-RPDs). Master casts were poured after a minimum of 24 h. Acrylic custom trays were used in 14% (n = 19) of cases (43% (n = 6) of CC-RPDs; 13% (n = 15) of A-RPDs). The quality of written instructions to dental laboratories for the fabrication of RPDs was found to be inadequate in Kingdom of Bahrain. There was widespread use of inappropriate impression trays and materials.     

Buonocore Memorial Lecture. Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition

This review provides a survey on the longevity of restorations in stress-bearing posterior cavities and assesses possible reasons for clinical failure. The dental literature, predominantly since 1990, was reviewed for longitudinal, controlled clinical studies and retrospective cross-sectional studies of posterior restorations. Only studies investigating the clinical performance of restorations in permanent teeth were included. Longevity and annual failure rates of amalgam, direct composite restorations, compomers, glass ionomers and derivative products, composite and ceramic inlays and cast gold restorations were determined for Class I and II cavities. Mean (SD) annual failure rates in posterior stress-bearing cavities are: 3.0% (1.9) for amalgam restorations, 2.2% (2.0) for direct composites, 3.6% (4.2) for direct composites with inserts, 1.1% (1.2) for compomer restorations, 7.2% (5.6) for regular glass ionomer restorations, 7.1% (2.8) for tunnel glass ionomers, 6.0% (4.6) for ART glass ionomers, 2.9% (2.6) for composite inlays, 1.9% (1.8) for ceramic restorations, 1.7% (1.6) for CAD/CAM ceramic restorations and 1.4% (1.4) for cast gold inlays and onlays. Publications from 1990 forward showed better results. Indirect restorations exhibited a significantly lower mean annual failure rate than direct techniques (p=0.0031). Longevity of dental restorations is dependent upon many different factors, including material, patient- and dentist-related. Principal reasons for failure were secondary caries, fracture, marginal deficiencies, wear and postoperative sensitivity. We need to learn to distinguish between reasons that cause early failures and those that are responsible for restoration loss after several years of service.     

An in vitro comparison of a combined FOTI/visual examination of occlusal caries with other caries diagnostic methods and the effect of stain on their diagnostic performance

The aims of this in vitro study were to compare the combination of FOTI and visual inspection to other diagnostic methods for the detection and evaluation of the depth of occlusal caries and assess the effect of stain on diagnostic performance. Five diagnostic methods (combined FOTI/Visual (CFV), Visual, FOTI, DIAGNOdent and Electrical Caries Monitor) were considered. Histological validation was performed in the 152 occlusal molar sites (111 teeth) using 350-microm sections and a stereomicroscope. The rank correlation coefficients with histology ranged from 0.42 (DIAGNOdent) to 0.66 (CFV). The area under the ROC curves (AUC) for enamel lesions ranged from 0.82 (ECM) to 0.88 (CFV) and from 0.81 (DIAGNOdent) to 0.91 (CFV) for dentine lesions. The AUC at the dentine level for CFV and FOTI were similar (p > 0.05), but the AUC for CFV was significantly greater than for visual (p < 0.001), DIAGNOdent (p = 0.005) and the ECM (p = 0.04). FOTI was found to be particularly useful for the detection of dentine lesions. The exclusion of stain and brown spot lesions improved performance for all methods. It is concluded that CFV is useful for the determination of occlusal lesion depth and that in the presence of stain and brown spot lesions different cut-off points may be required for the ECM and DIAGNOdent to identify dentine lesions.     

The immediate effect of changing mandibular position on the EMG activity of the masseter, temporalis, sternocleidomastoid, and trapezius muscles

This study investigated the immediate effect of changing mandibular position on the electromyographic (EMG) activity of the masseter (MS), temporalis (TM), sternocleidomastoid (SCM) and trapezius (TR) muscles. Thirty-three (33) asymptomatic subjects (16 males and 17 females), ages 23 to 52 were selected. Surface EMG recordings were obtained for all muscles bilaterally with the mandible in a relaxed open position (relaxed) and during maximal voluntary clenching (fullbite) for the following: a non-repositioning appliance (NONREPOS) and repositioning appliance (REPOS). REPOS significantly reduced EMG activity of all muscles bilaterally during fullbite. During relaxation, reduction in EMG activity was only found for TR bilaterally. NONREPOS decreased the EMG activity bilaterally for TM and TR and unilaterally (left) for MS and SCM during fullbite. During relaxation, NONREPOS decreased muscle activity bilaterally for TR and SCM. A unilateral reduction was found for TM (right). These findings suggest that immediate alterations in mandibular position affect the cranio-cervical system. Both mandibular positions tested lowered the EMG activity of masticatory and cervical muscles in the relaxed and fullbite positions. The trapezius muscle was the most responsive to alterations in mandibular position.     

Immunocytochemical detection of herpes viruses in oral smears of HIV-infected patients

Cytologic smears (CS) were taken from the lateral border of the tongue of HIV-seropositive patients (HIV+) (n = 39) and of seronegative controls (HIV-) (n = 19) and examined by immunocytochemistry (APAAP) and in situ hybridization (ISH) (biotinylated DNA probes) for the presence of viral antigens/DNA of EBV and CMV. While none of the HIV controls showed positive results for EBV antigen, 61% (APAAP) resp. 79% (ISH) of oral epithelial cells in the group of HIV+ patients were EBV-positive. While all CS taken from areas with the clinical diagnosis of hairy leukoplakia (HL) were EBV positive (APAAP and/or ISH), the detection of EBV in CS from uninvolved oral mucosa seemed to be associated with the later development of HL. In the group of HIV+ patients the detection rate for CMV was about five times (APAAP) resp. three times (ISH) higher than in HIV- persons. This non-invasive technique seems to be a valuable tool to screen for viral antigens/genomes.     

Technique for construction of dental molds for high-dose-rate remote brachytherapy

High-dose-rate remote (HDR) brachytherapy eliminates radiation exposure hazard to personnel, allows for optimum dosage planning (dosimetry), and delivers high radiation dose close to the tumor in only a few minutes. The catheters can be Incorporated into a fixed geometry within a mold, allowing for repeated treatments without the need for repeated implantation of radioactive Isotopes or repeated dosimetry. This article presents the use of HDR brachytherapy in three patients to Illustrate the advantages of HDR brachytherapy for the treatment of head and neck cancers in the following circumstances: (a) for outpatient therapy, (b) as an addition to or potentiation of external beam irradiation, (c) for preservation of function of regional structures, (d) for optimization of dosimetry, and (e) for palliation. It requires close interaction among the radiation oncologist, head and neck surgeon, and the dental oncologist and/or maxillofacial prosthodontist in order for optimum benefit for the patient to be achieved.     

Effect of a casein/calcium phosphate-containing tooth cream and fluoride on enamel erosion in vitro

The aim of this study was to determine whether a tooth cream containing casein/calcium phosphate (CasCP) protects enamel against erosion. Sixty bovine enamel specimens were prepared for profilometry and distributed into five groups. Specimens were rinsed with artificial saliva interrupted by 1% citric acid (pH 2.3) for 30 s 6 times daily for 14 days. Group 1 (n=12) was not treated (control); in group 2 (n=12) CasCP was applied for 120 s twice daily; in group 3 (n=12) 250 ppm fluoride as NaF was applied for 120 s twice daily; in group 4 (n=12) CasCP was applied for 120 s, then 250 ppm fluoride for 120 s twice daily, and in group 5 (n=12) amine fluoride (AmF) gel (12,500 ppm fluoride) was applied for 120 s twice daily. Differences between groups with respect to erosive enamel loss (profilometrically determined depth after 7 and 14 days) were tested by the Mann-Whitney test (alpha=0.05). After 7/14 days' erosive cycling, specimens treated with AmF gel showed significantly less enamel loss (18.5/35.5 microm; medians) than those treated with CasCP (25.5/46.9 microm), 250 ppm fluoride (25.0/ 40.9 microm), CasCP and 250 ppm fluoride (23.9/47.4 microm) or with no treatment (26.3/49.8 microm). It is concluded that highly fluoridated acidic AmF gel can protect enamel against erosion while CasCP, 250 ppm fluoride or a combination of CasCP and 250 ppm fluoride provide little protection.     

Comparison of using calcium hydroxide or a dentine primer for reducing dentinal pain following crown preparation: a randomized clinical trial with an observation time up to 30 months

The purpose of this study was to evaluate effect of a calcium hydroxide suspension [Ca(OH)2] or glutaraldehyde based dentine primer (GDP) to reduce tooth sensitivity after full crown preparation. Thirty-six patients were treated with Ca(OH)(2) on one tooth and with GDP on another. Patients completed a questionnaire regarding sensitivity during crown preparation, when the not-anaesthetized abutments were irritated [cotton pellet (20 degrees C)]. The teeth were tested before (T(0)) and after using the desensitizer (T(1)), again after 7 days (T(2)), 6 months (T(3)) and 30 months (T(4)). The results were registered on a visual analogue scale [0 (no pain)-100 (severe pain)]. The changes of tooth sensitivity between different testing times were analysed. The median and the (interquartile range) for the different time intervals for Ca(OH)(2) were DeltaT(0)-T(1): 5 (6-17), DeltaT(0)-T(2): 17 (14-32), and for GDP, DeltaT(0)-T(1): 9 (7-18) DeltaT(0)-T(2): 18 (16-33), the decreases in sensitivity were lower for DeltaT(0)-T(1) than for DeltaT(0)-T(2) for both desensitizers (P < 0.001). There was no statistical difference (P > 0.05) between the agents (DeltaT(0)-T(1), DeltaT(0)-T(2), DeltaT(3)-T(4)). Both substances might be useful in reducing tooth sensitivity after crown preparation, but no differences in the efficacy were found when comparing the materials.     

Presence of human papilloma virus,herpes simplex virus and Epstein–Barr virus DNA in oral biopsies from Sudanese patients with regard to toombak use

J Oral Pathol Med (2010) 39 : 599–604 Using PCR/DNA sequencing, we investigated the prevalence of human papillomavirus (HPV), herpes simplex virus (HSV) and Epstein–Barr virus (EBV) DNA in brush biopsies obtained from 150 users of Sudanese snuff (toombak) and 25 non‐users of toombak in formalin‐fixed paraffin‐embedded tissue samples obtained from 31 patients with oral dysplasias (25 toombak users and 6 non‐users), and from 217 patients with oral cancers (145 toombak users and 72 non‐users). In the brush tissue samples from toombak users, HPV was detected in 60 (40%), HSV in 44 (29%) and EBV in 97 (65%) of the samples. The corresponding figures for the 25 samples from non‐users were 17 (68%) positive for HPV, 6 (24%) positive for HSV and 21 (84%) for EBV. The formalin‐fixed samples with oral dysplasias were all negative for HPV. In the 145 oral cancer samples from toombak users, HPV was detected in 39 (27%), HSV in 15 (10%) and EBV in 53 (37%) of the samples. The corresponding figures for the samples from non‐users were 15 (21%) positive for HPV, 5 (7%) for HSV and 16 (22%) for EBV. These findings illustrate that prevalence of HSV, HPV and EBV infections are common and may influence oral health and cancer development. It is not obvious that cancer risk is increased in infected toombak users. These observations warrant further studies involving toombak‐associated oral lesions, to uncover the possible mechanisms of these viral infections in the development of oral cancer, and the influence of toombak on these viruses.     

Clinical analysis of the stability of dental implants after preparation of the site by conventional drilling or piezosurgery

We used resonance frequency analysis to evaluate the implant stability quotient (ISQ) of dental implants that were installed in sites prepared by either conventional drilling or piezoelectric tips. We studied 30 patients with bilateral edentulous areas in the maxillary premolar region who were randomised to have the implant inserted with conventional drilling, or with piezoelectric surgery. The stability of each implant was measured by resonance frequency analysis immediately after placement to assess the immediate stability (time 1) and again at 90 days (time 2) and 150 days (time 3). In the conventional group the mean (SD) ISQ for time 1 was 69.1 (6.1) (95% CI 52.4–77.3); for time 2, 70.7 (5.7) (95% CI 60.4–82.8); and for time 3, 71.7 (4.5) (95% CI 64.2–79.2). In the piezosurgery group the corresponding values were: 77.5 (4.6) (95% CI 71.1–84.3) for time 1, 77.0 (4.2) (95% CI, 69.7–85.2) for time 2, and 79.1 (3.1) (95% CI 74.5–87.3) for time 3. The results showed significant increases in the ISQ values for the piezosurgery group at each time point (p = 0.04). The stability of implants placed using the piezoelectric method was greater than that of implants placed using the conventional technique.