Complication rate in mandibular angle fractures—one vs. two plates: a 12-year retrospective analysis

Purpose

Treatment of mandibular angle fractures using one or two osteosynthesis plates is still a controversial topic. Fracture, treatment, and patient-dependent influencing factors could affect the overall outcome. In the present retrospective study, complication rates of mandibular angle fractures treated by open reduction were assessed according to type of treatment.

Materials and methods

We analyzed retrospective medical records using the search terms “mandibular angle fracture.” We included all patients presenting with a mandibular angle fracture treated by open reduction and internal fixation at our department between 2002 and 2012.

Results

We included 186 patients treated with open reduction and miniplate fixation (84 one plate; 102 two plates). The early complication rate was significantly higher for the double-plate group (72.5% vs. 47.6%, respectively; p?=?0.001). Most common findings in the postoperative period were transient hypoesthesia and tissue swelling. In the two-plate group, a significantly increased operation time of 183 min versus 150 min in the one-plate group was found (p?<?0.001). Late complications did not differ significantly between both groups (21.4% single-plate group; 30.4% two-plate fixation group; p?=?0.32).

Conclusion

We found a significantly increased early complication rate in the two-plate group. Long-term complications did not differ between both groups.

     

Accuracy of patient-specific implants and additive-manufactured surgical splints in orthognathic surgery — A three-dimensional retrospective study

IntroductionBecause of the many limitations of conventional surgery planning for the treatment of orthognathic deformities, as well as advancements in computer-assisted planning, there is an urgent need for technical devices that transfer the surgical plan into the operating theatre. In this regard, additive-manufactured, patient-specific implants (PSI) and additive-manufactured interocclusal splints represent promising approaches. The aim of this retrospective study was to compare the accuracy of these two devices, with regard to preoperative virtual treatment planning for maxillary Le-Fort I advancement surgery using IPS CaseDesigner^®, and based on a new analysis method without the use of landmarks.Materials and methodsA retrospective evaluation of 18 class III patients (n(PSI) = 9; n(splint) = 9), who had undergone virtually planned orthognathic surgery (including maxillary Le Fort I advancement), was performed. The preoperative treatment plan and the postoperative outcome were combined to calculate the translational and rotational discrepancies between the 3D planning and the actual surgical outcome.ResultsFor the PSI and splint groups the accuracy of left/right positioning was 0.51 mm ± 0.48 and 1.11 mm ± 1.32 respectively. The accuracy of anterior/posterior positioning was 0.39 mm ± 0.26 and 1.42 mm ± 0.87, and that of up/down-positioning was 0.44 mm ± 0.31 and 0.62 mm ± 0.47. The rotational discrepancies were less than 2° in both groups. Conclusion: The findings demonstrate that both PSI and splint approaches can accurately transfer the virtual planning into the operating theatre. However, PSIs show an overall higher accuracy, especially for anterior/posterior translational movement (p < 0.002).     

Comparison between two thermoplastic root canal obturation techniques regarding extrusion of root canal filling—a retrospective in vivo study

Objectives

The aim of this study was to compare two different thermoplastic techniques—a core-carrier technique (Thermafil) and warm vertical compaction—in terms of overextension of root canal filling in vivo.

Materials and methods

Flaring of 88 teeth was conducted using Pro Files .04 as finishing files, and the teeth were obturated using Thermafil. Flaring of 74 teeth was performed using Pro Files .06 as finishing files, and the teeth were obturated using warm vertical compaction.

Results

Seventy (80 %) of the teeth obturated using Thermafil and 31 (42 %) teeth obturated using warm vertical compaction show extruded root canal filling. In contrast to Thermafil, there is a higher rate of extruded root canal filling of teeth with more than one root canal using warm vertical compaction.

Conclusion

Thermafil demonstrated a higher rate of extruded root canal filling compared to warm vertical compaction. Warm vertical compaction is a more predictable method of filling compared to Thermafil.

Clinical relevance

Root canal filling extrusion will cause irritation of the surrounding tissue and impair repair processes. In the present in vivo study, there was a higher rate of root canal filling extrusion using Thermafil compared to warm vertical compaction.     

Splintless orthognathic surgery in edentulous patients—a pilot study

The aim of this pilot study was to evaluate the accuracy and predictability of a splintless treatment protocol for edentulous patients undergoing orthognathic surgery in four consecutive cases. All operations were virtually planned, followed by computer-aided design of individual osteotomy guides and patient-specific fixation implants, which were three-dimensionally printed in titanium. In order to evaluate the discrepancy between the planned and the achieved postoperative result, the postoperative outcome was compared to the virtual treatment plan. Rotational and translational movement and discrepancies with the planned movements were quantified for the maxilla; the advancement was quantified for the mandible. For the maxilla, there was a mean translation discrepancy of 0.6 mm. With regard to rotation, there was a mean discrepancy of 1.9°, 0.1°, and 0.4° for pitch, yaw, and roll, respectively. The mean discrepancy in translation of the mandible was 0.4 mm. The results of this pilot study indicate that the splintless treatment protocol for orthognathic surgery in edentulous patients presented here is accurate and predictable.     

Comparative evaluation of 2.0-mm locking plate system vs. 2.0-mm nonlocking plate system for mandibular fractures — a retrospective study

Introduction

The purpose of this retrospective study is to evaluate the efficacy of the 2.0-mm locking miniplate/screw system in comparison to the 2.0-mm nonlocking miniplate/screw system in mirror image mandibular fractures.

Material and method

A retrospective clinical trial was reviewed in the Department of Oral and Maxillofacial Surgery, Government Dental College, Pt. B.D. Sharma University of Health Sciences Rohtak for a period of 30 months (June 2007 to December 2009). A total of 30 patient pairs with isolated identical mandibular fracture (single or multiple) having 88 fractures were analyzed.

Results

A total of 11 complications that occurred represented 12.5 % of the total. Six complications occurred at angle, three in the body and two at parasymphysis. Four complications occurred in the locking group and seven in the nonlocking group, with complication rates accounting for 9 % and 16 %, respectively. When comparing the overall complication rates according to plates used, the chi-square test showed no statistically significant difference between the locking and nonlocking plates (p?>?0.05).

Discussion

Mandible fractures treated with the 2.0-mm locking plates and the 2.0-mm nonlocking plates present similar short-term complication rates.     

Treatment of low subcondylar fractures—a 5-year retrospective study

The aim of the present study was to retrospectively review the treatment outcome of low subcondylar temporomandibular joint fractures. The retrospective analysis was performed on all patients treated for low subcondylar fractures (below the sigmoid notch) between 2006 and 2011. Patients were divided into two groups: the closed reduction group (maxillomandibular fixation, MMF) and the open reduction group (anteroparotid transmasseteric (APTM) approach). Out of 129 condylar fractures, a total of 37 patients met the inclusion criterion of a fracture below the sigmoid notch (low subcondylar). Ten patients (seven males and three females) were treated using the APTM approach, and 27 patients were treated conservatively by MMF. In the open reduction group, two patients (20%) had limited mouth opening that resolved following physiotherapy; the closed reduction group had a similar percentage (18.5%) of mouth opening limitation (below 35 mm). No facial nerve damage was noted. Adult patients suffering from low subcondylar fractures can be treated by open reduction and internal fixation using the APTM approach, which was found to be a safe and reproducible procedure with no facial nerve damage; however this is a surgical procedure with a shallow learning curve.     

Relationship between fracture of mandibular condyle and absence of unerupted mandibular third molar—a retrospective study

Purpose

The purpose of the present study was to find, if there exists, a co-relation between presence of unerupted mandibular third molar and fracture of mandibular condyle.

Methods

A retrospective, multicenter study was done collecting the data of all mandibular condyle fractures treated from November 2006 till August 2015. Data was collected from the patient’s records and radiographs for the following information: age, sex, etiology of fracture, presence and state of lower third molars, and associated fracture. The results were subjected to statistical analysis.

Results

Out of 180 patients of condylar fracture, unerupted third molars were present in 35 (19.44 %) cases compared to 145 (80.55 %) cases of condylar fracture where the unerupted third molars were not present. The difference was statistically significant (p < 0.05). In the unerupted third molar present group, isolated bilateral condylar fracture was seen in 4 (11.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 9 (25.7 %) cases, isolated unilateral condylar fracture in 0 (0.0 %) cases, and unilateral condylar fracture associated with other mandibular fractures in 17 (48.5 %) cases and condylar fracture associated with mid face fractures in 5 (14.2 %) cases. In the unerupted third molar absent group, isolated bilateral condylar fracture was seen in 5 (3.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 30 (20.6 %) cases, isolated unilateral condylar fracture in 24 (16.5 %) cases, unilateral condylar fracture associated with other mandibular fractures in 73 (50.34 %) cases, and condylar fracture associated with mid face fractures in 13(8.96 %) cases. The difference between the groups was statistically significant (p = 0.032).

Conclusion

This study suggests that the fractures of mandibular condylar region have a significantly higher incidence in patients without an unerupted mandibular third molar.

     

Short-term pharyngeal airway changes after mandibular advancement surgery in adult Class II-Patients—a three-dimensional retrospective study

The purpose of this study was to investigate volume changes in posterior airway space (PAS) after bilateral mandibular advancement surgery. Measurements were taken based on three-dimensional (3D) records available for a large and homogeneous cohort of patients. Pre- and postoperative CBCT scans of 102 adult patients with Class II dysgnathia were visualized and analyzed using 3D software (Mimics® Innovation Suite 14.1; Materialise, Leuven, Belgium). The PAS was divided into three segments by three planes parallel and one plane perpendicular to the Frankfort horizontal plane. Total volume, partial volumes, and cross-sectional areas were calculated from the pre- and postoperative scans. Dahlberg coefficients were obtained to verify each parameter for the measurements’ reliability. The statistical significance of the changes observed was analyzed by Wilcoxon’s rank-sum test. Highly significant (p=0.000) increases in total posterior airway volume (+32.0%) were noted as an effect of mandibular advancement surgery, amounting to 45.6% in the lower PAS third compared to 38.8% in the middle and 12.5% in the upper PAS third. We also obtained highly significant (p=0.000) increases in all the cross-sectional areas investigated, amounting to 48.5% on the soft-palate level compared to 21.6% on the level of the epiglottis tip, and 14.6% on the hard-palate level. These results demonstrate that bilateral mandibular advancement surgery in Class II-Patients leads to significant increases in PAS volume and significant widening of the narrower sites inside the pharynx.     

Short- and long-term changes of the pharyngeal airway after surgical mandibular advancement in Class II patients—a three-dimensional retrospective study

Purpose

To evaluate the short- and long-term impact of mandibular-only advancement on pharyngeal airway space (PAS) changes by using cone-beam computed tomography (CBCT) and a new segmentation software. Furthermore, to determine whether a correlation exists between forward movement and PAS gain.

Accuracy and reliability of voxel-based dentoalveolar registration (VDAR) in orthognathic surgical patients: a pilot study with two years’ follow-up

The purpose of this study was to validate the applicability of using maxillary voxel-based dentoalveolar registration (VDAR) at long-term follow up in orthognathic surgical patients. A retrospective sample of 25 patients (skeletal class II or III) who underwent bimaxillary orthognathic surgery was recruited and divided into two groups. Group A included 15 patients (seven females, eight males, mean (SD) age 25.8 (14.4) years) with unrestored dentition and group B involved 10 patients (five females, five males, mean (SD) age: 26.2 (11.9) years) with dental restorative treatment. Postoperative cone-beam computed tomography (CBCT) scans were acquired at four time-points, one to six weeks (T1), six months (T2), one year (T3) and two years (T4). Voxel- based registration was applied using the cranial base and then complete dental segment with part of the alveolar bone at T1-T2, T1-T3 and T1-T4 time-intervals. The translational and rotational accuracy and reproducibility of the registered maxillary segment was evaluated at these three intervals by analysing the transformation matrix using singular value decomposition. All translational and rotational measurements showed excellent reliability in both groups without any significant difference. The combined translational and rotational difference was found to be within the clinically acceptable range of 2 mm and 4°. The VDAR was found to be accurate and reliable to be utilised for a long-term skeletal follow-up in orthognathic surgical patients.     

Comparison of 3D plate and locking plate in treatment of mandibular fracture—a clinical study

Introduction

This study was performed to evaluate the efficacy and post-operative complication of 3-dimensional (3D) titanium miniplate and locking plate in mandibular fractures (parasymphysis, symphysis, body, and angle).

Materials and methods

Forty patients, with non-comminuted mandibular fractures treated with open reduction and internal fixation using 3D titanium miniplate system or locking plate system through an intra-oral approach, were included in this study. All patients were systematically monitored up to 2 months post-operatively. Parameters recorded were infection, occlusal discrepancies, hardware failure, wound dehiscence, sensory disturbance of the inferior alveolar nerve, and stability of fractured segments.

Results

Forty patients with mandibular fracture were divided into two groups randomly without any bias. The fractures of all 40 patients were found to be adequately fixed when checked intra-operatively after fixation. One patient (2.5%) of the 3D plate group developed an infection on the first and second post-operative visit and was treated by antibiotic coverage. One patient in the locking plate group (2.5%) reported wound dehiscence after the first week follow-up.

Conclusion

Both 3D titanium miniplates and locking plate are effective in the treatment of mandibular fractures, and overall complication rates are lesser. However, the 3D plating system uses less hardware in cases of parasymphysis and symphysis fractures and more hardware in cases of body and angle fractures.

     

Treatment outcome in orthognathic surgery – A prospective comparison of accuracy in computer assisted two and three-dimensional prediction techniques

The main objective of the present study was to assess the accuracy of two- and three-dimensional prediction techniques in orthognathic surgery. It was also a test of the very planning sequence. The scientific question was how well does the software support the surgeon in his way to find the perfect correction of the facial appearance while normalizing the occlusion?Thirty patients with a class III occlusion were included in this prospective study. Surgical planning with both techniques were undertaken for all patients. Surgery was performed according to the two-dimensional technique. The cephalometric measurements from two-dimensional and three dimensional predictions were compared with the postoperative results at the 12 months follow-up respectively.Together with an analysis of tracing error, placements of 2020 markers, 1860 measurements and 1280 comparisons was performed. The analysis showed an equally high accuracy for the studied techniques. The highest accuracy was found in the anterior maxilla. There was a tendency for an overestimation for the three-dimensional technique and an underestimation for the two-dimensional technique.

Longevity of composite build-ups without posts—10-year results of a practice-based study

Aim

The aim of this prospective, non-interventional, multi-center, practice-based study was, firstly, to evaluate the longevity of composite build-ups in endodontically treated teeth (ETT) without post placement and, secondly, to analyze factors influencing the success of these composite build-ups.

Methodology

Each of seven general dental practitioners placed up to 50 composite build-ups without additional posts in ETT. Teeth were restricted to incisors, canines, and premolars. Several clinical data were recorded for 192 coronal restorations on ETT in 192 patients. Cox proportional hazard models were applied to analyze associations between clinical factors and time until failure.

Results

Within a follow-up period of 10 years, 167 restorations were judged as successful [mean success time, 110 (105–115) months] and 180 teeth survived [mean survival time, 114 (110–119) months]. The main failure type was fracture of the restoration (n = 15). The annual failure rate was 2.4%. In bivariate Cox regression, both factors such as number of restored tooth surfaces and adhesive were significantly associated with the failure rate. In multivariate Cox proportional hazards regression, none of the investigated factors were significantly associated with the failure rate.

Conclusion

For composite build-ups in ETT without post placement, high success rates could be found after up to 10 years of observation time. Within the limitations of the present study, none of the analyzed factors such as “tooth type” or “number of restored tooth surfaces” was a significant predictor for the failure rate.

Clinical relevance

Endodontically treated teeth can be successfully directly restored with composite build-ups even when no additional post is inserted.

Trial registration

The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00012882).

     

Endoscopic sinus surgery for dental implant displacement into the maxillary sinus—a retrospective clinical study

The aims of this retrospective clinical study were to present our management protocol for the retrieval of impacted dental implants that have become displaced into the maxillary sinus cavity and to define the role of endoscopic sinus surgery in this setting. All 24 patients (25 implants) who underwent surgical retrieval of dental implants displaced into the maxillary sinus between 2012 and 2019 were included. Data on surgical interventions and complications were collected retrospectively. Eleven patients (46%) had chronic sinusitis associated with the migrated implant. All implants were successfully retrieved via transnasal endoscopic approach alone: 80% via a middle meatal antrostomy and 20% via a combined middle and inferior meatal antrostomy. Five patients required a concomitant transoral approach for oro-antral fistula repair. None required a transoral approach for displaced implant retrieval. All patients healed uneventfully without complications. Transnasal endoscopic sinus surgery via a middle meatal antrostomy or a combined middle and inferior antrostomy is recommended as the primary choice for dental implant retrieval from the maxillary sinus. A transoral approach should be performed simultaneously only for oro-antral fistula repair. This surgical protocol proved to be safe and efficient, and it obviated the need for osteotomies of the anterolateral maxillary wall.