The results of tension band rotator cuff suture fixation of locked plating of displaced proximal humerus fractures

IntroductionThe purpose of this study was to assess 1-year outcomes of patients with displaced proximal humerus fractures who underwent treatment with locked plate fixation with rotator cuff suture augmentation.MethodsA total of 86 patients who had sustained 2, 3 and 4-part displaced proximal humerus fractures underwent locked plate fixation with multiple sutures placed in the cuff tendons. Clinical outcome variables included active forward elevation (AFE), active external rotation (AER), and Constant and American Shoulder and Elbow Surgeons (ASES) scores. Post-operative variables included the following complications: varus re-collapse, loss of fixation, osteonecrosis of the humeral head (AVN), screw cut out, hardware failure and infection.ResultsForty-one patients were available with minimum of 1-year follow-up. Mean AFE was 142 ± 17.0° and AER was 41 ± 13.0°. The overall complication rate was 14.6%, with osteonecrosis being the most common (12.2%). Of the 21 patients (51.2%) that initially had varus displacement, all but one maintained anatomic reduction and fixation. Mean ASES score was 78.2 ± 20.0 and average Constant score was 72.7 ± 17.6. Bivariate analyses demonstrated that pre-operative medial comminution (p = 0.297) or varus collapse (p = 0.95) were not associated with an increased likelihood of sustaining a complication.ConclusionsFollow-up of patients in this series demonstrated a low overall complication rate and excellent functional outcomes. We believe suture augmentation of the rotator cuff can counteract varus forces on proximal humerus fractures fixed with locked plates, and should be performed routinely in displaced 2, 3 and 4 part fractures.     

Reconstruction of Monteggia-like proximal ulna fractures using different fixation devices: A biomechanical study

BackgroundComminuted proximal ulna fractures are rare and reconstruction of these fractures is discussed controversially. The aim of this study was to test three currently available plate devices in a standardized comminuted four-part fracture model created in proximal ulna sawbones.Material and methodsA standardized four-part fracture of the proximal ulna was created in 80 sawbones. Reconstruction was performed by five experienced test surgeons according to a standardized reconstruction protocol. Each surgeon reconstructed 4 fractures with a 3.5 mm eight-hole reconstruction plate, 4 fractures with seven-hole third-tubular double plates and 4 fractures with a 3.5 mm anatomical seven-hole locked angle proximal ulna plate. 4 more fractures were reconstructed with simple K-wires as a reference construct for further experiments. Outcome measurements were time for reconstruction, quality of reconstruction and stability of the reconstruction. Stability testing was done in 90° and 30° flexion of the elbow. Testing in 30° flexion was done to test the anteroposterior stability regarding the fixed coronoid process.ResultsTime for reconstruction was significantly less for K-wire fixation than for the plate devices. Time for reconstruction plating and locked angle plating was significantly lower than for double plating (p < 0.005). Quality of reduction did not differ between the three plate systems (p < 0.05). K-wire fixation showed the best quality of reduction (p < 0.005). In 90° of elbow flexion the anatomic locked angle olecranon plate showed a significantly higher stability compared to the other devices. Furthermore the tubular double plating was significantly more stable than reconstruction plating or K-wire fixation (p < 0.05). In anteroposterior loading at 30°, the stability did not differ between the 4 different fixation techniques (p > 0.05). For all devices the testing in 30° flexion showed a significantly higher rigidity compared to 90° flexion.ConclusionThe locked angle plate system showed the highest stability in 90° of elbow flexion. Each implant was more stable in 30° flexion than in 90° flexion. Testing of the anterior stability of the elbow did not show any differences between the different implants. Because of the superior stability of this device, we conclude that locked angle plating should be preferred for reconstruction of monteggia like complex proximal ulna fractures.     

The outcome of super-cutaneous locked plate fixation with percutaneous reduction of displaced intra-articular calcaneal fractures

IntroductionSupercutaneous (external) fixation with locking plate is utilized for fixation of long bone fractures. One retrospective study for open reduction and supercutaneous fixation of the calcaneus is reported. We prospectively evaluated the use of this method of fixation combined with percutaneous reduction.Materials and methodsBetween January 2014 and June 2015, 32 displaced calcaneus fractures in 30 patients were stabilized with percutaneous reduction and super-cutaneous fixation. They were 24 males and six females. The mean age was 37.9 ± 5.7 years (21–55). All cases were closed. The time to surgery, complications, radiographic alignment, and time to radiographic union were recorded. Clinical results at the final follow-up were assessed by evaluating Bohler’s angles for the radiographic alignment, and the system of the American Orthopedic Foot and Ankle Society (AOFAS) for the functional outcome.ResultsAccording to the Sanders’ classification, two cases were type II, 17 cases were type III and 13 cases were type IV. The preoperative average Bohler’s angle was 10.57° ± 4.8. The postoperative X-ray films demonstrated that the average Bohler’s angle improved to 29.07° ± 5.9 (p < 0.001). At the time of radiologic healing (about 3 months), the plates and screws were removed under general anesthesia. The average follow-up was 13.2 months (11–18). Four cases (type IV) showed mal-union and heel pain. According to (AOFAS) rating, the fine score was 87.1 ± 17.1 points.ConclusionSuper-cutaneous fixation with percutaneous reduction of calcaneal fracture is an effective method in type II and III and can be effective with type IV but with less favorable results.     

The anterolateral supra-fibular-head approach for plating posterolateral tibial plateau fractures: A novel surgical technique

ObjectiveThe posterolateral (PL) tibial plateau quadrant is laterally covered by the fibular head and posteriorly covered by a mass of muscle ligament and important neurovascular structures. There are several limitations in exposing and fixing the PL tibial plateau fractures using a posterior approach. The aim of this study is to present a novel anterolateral supra-fibular-head approach for plating PL tibial plateau fractures.MethodsFive fresh and ten preserved knee specimens were dissected to measure the following parameters:1) the vertical distance from the apex of the fibular head to the lateral plateau surface, 2) the transverse distance between the PL platform and fibula collateral ligament (FCL), and 3) the tension of the FCL in different knee flexion positions. Clinically, isolated PL quadrant tibial plateau fractures were treated via an anterolateral supra-fibular-head approach and lateral rafting plate fixation. The outcome of the patients was assessed after a short to medium follow-up period.ResultsThe distance from the apex of the fibular head to the lateral condylar surface was 12.2 ± 1.6 mm on average. With the knee extended and the FCL tensioned, the transverse distance between the PL platform and the FCL was 6.7 ± 1.1 mm. With the knee flexed to 60° and the FCL was in the most relaxed position, the distance increased to 21.1 ± 3.0 mm. Clinically, a series of 7 cases of PL tibial plateau fractures were treated via this anterolateral supra-fibular-head approach. The patient was placed in a lateral decubitus position with the knee flexed to approximately 60 degrees. After the posterior retraction of the FCL, the plate was placed more posteriorly to provide a raft or horizontal belt fixation of the PL tibial plateau fragment. After an average of 14.3 months of follow up, the knee range of motion(ROM) was 121.4°±8.8° (range: 105°-135°), the HSS score was 96.7 ± 2.6 (range: 90-100), and the SMFA dysfunction score was 22.4 ± 3.8 (range: 16-28) points.ConclusionThe anterolateral supra-fibular-head approach can provide direct visualization of the posterolateral tibial plateau quadrant and put the plate more posteriorly to provide a raft for the fragments such that good clinical outcomes can be anticipated.     

Coracoid bone graft osteolysis after Latarjet procedure: A comparison study between two screws standard technique vs mini-plate fixation

Aims:

One of the reason for Latarjet procedure failure may be coracoid graft osteolysis. In this study, we aimed to understand if a better compression between the coracoid process and the glenoid, using a mini-plate fixation during the Latarjet procedure, could reduce the amount of coracoid graft osteolysis.

Materials and Methods:

A computed tomography scan analysis of 26 prospectively followed-up patients was conducted after modified Latarjet procedure using mini-plate fixation technique to determine both the location and the amount of coracoid graft osteolysis in them. We then compared our current results with results from that of our previous study without using mini-plate fixation to determine if there is any statistical significant difference in terms of corcacoid bone graft osteolysis between the two surgical techniques.

Results:

The most relevant osteolysis was represented by the superficial part of the proximal coracoid, whereas the deep part of the proximal coracoid graft is least involved in osteolysis and has best bone healing. The current study showed a significant difference only for the deep part of the distal coracoid with our previous study (P < 0.01).

Discussion:

To our knowledge, there are no studies in literature that show the causes of coracoid bone graft osteolysis after Latarjet procedure.

Conclusion:

Our study suggests that there is a significant difference only for the deep part of the distal coracoid in terms of osteolysis. At clinical examination, this difference did not correspond with any clinical findings.

Level of Evidence:

Level 4.

Clinical Relevance:

Prospective case series, Treatment study.     

A double button adjustable loop device is biomechanically equivalent to tension band wire in the fixation of transverse patellar fractures—A cadaveric study

IntroductionTension-band wire fixation of patellar fractures is associated with significant hardware-related complications and infection. Braided polyester suture fixation is an alternative option. However, these suture fixations have higher failure rates due to the difficulty in achieving rigid suture knot fixation. The Arthrex syndesmotic TightRope, which is a double-button adjustable loop fixation device utilizing a 4-point locking system using FibreWire, may not only offer stiff rigid fixation using a knotless system, but may also obviate the need for implant removal due to hardware related problems. The aim of our study is to compare the fixation rigidity of patella fractures using Tightrope versus conventional tension-band wiring (TBW) in a cadaveric model.Materials and methodsTBW fixation was compared to TightRope fixation of transverse patella fractures in 5 matched pairs of cadaveric knees. The knees were cyclically brought through 0–90° of motion for a total of 500 cycles. Fracture gapping was measured before the start of the cycling, and at 50, 100, 200 and 500 cycles using an extensometer. The mean maximum fracture gapping was derived. Failure of the construct was defined as a displacement of more than 3 mm, patella fracture or implant breakage.ResultsAll but one knee from each group survived 500 cycles. The two failures were due to a fracture gap of more than 3 mm during cycling. There was no significant difference in the mean number of cycles tolerated. There was no implant breakage. There was no statistical significant difference in mean maximum fracture gap between the TBW and TightRope group at all cyclical milestones after 500 cycles (0.3026 ± 0.4091 mm vs 0.3558 ± 0.7173 mm, p = 0.388).ConclusionsWe found no difference between the TBW and Tightrope fixation in terms of fracture gapping and failure. With possible lower risk of complications such as implant migration and soft tissue irritation, we believe tightrope fixation is a feasible alternative in fracture management of transverse patella fractures.     

Anterior-inferior tibiofibular ligament anatomical repair and augmentation versus trans-syndesmosis screw fixation for the syndesmotic instability in external-rotation type ankle fracture with posterior malleolus involvement: A prospective and comparative study

PurposeSyndesmosis injury is common in external-rotation type ankle fractures (ERAF). Trans-syndesmosis screw fixation, the gold-standard treatment, is currently controversial for its complications and biomechanical disadvantages. The purpose of this study was to introduce a new method of anatomically repairing the anterior-inferior tibiofibular ligament (AITFL) and augmentation with anchor rope system to treat the syndesmotic instability in ERAF with posterior malleolus involvement and to compare its clinical outcomes with that of trans-syndesmosis screw fixation.Methods53 ERAFs with posterior malleolus involvement received surgery, and the syndesmosis was still unstable after fracture fixation. They were randomised into screw fixation group and AITFL anatomical repair with augmentation group. Reduction quality, syndesmosis diastasis recurrence, pain (VAS score), time back to work, Olerud–Molander ankle score and range of motion (ROM) of ankle were investigated.ResultsOlerud–Molander score in AITFL repair group and screw group was 90.4 and 85.8 at 12-month follow-up (P > 0.05). Plantar flexion was 31.2° and 34.3° in repair and screw groups (P = 0.04). Mal-reduction happened in 5 cases (19.2%) in screw group while 2 cases (7.4%) in repair group. Postoperative syndesmosis re-diastasis occurred in 3 cases in screw group while zero in repair group (P > 0.05). Pain score was similar between the two groups (P > 0.05). Overall complication rate and back to work time were 26.9% and 3.7% (P = 0.04), 7.15 months and 5.26 months (P = 0.02) in screw group and repair group, respectively.ConclusionsFor syndesmotic instability in ERAF with posterior malleolus involvement, the method of AITFL anatomical repair and augmentation with anchor rope system had an equivalent functional outcome and reduction, earlier rehabilitation and less complication compared with screw fixation. It can be selected as an alternative.     

Complications associated with operative fixation of acute midshaft clavicle fractures

IntroductionThe aim of this study was to review the complication rate and profile associated with surgical fixation of acute midshaft clavicle fracture in a large cohort of patients treated in a level I trauma centre.Patients and methodsWe identified all patients who underwent surgical treatment of acute midshaft clavicle fracture between 2002 and 2010. The study group consisted of 138 fractures (134 patients) and included 107 men (78%) and 31 women (22%); the median age of 35 years (interquartile range (IQR) 24–45). The most common mechanism of injury was a road traffic accident (78%). Sixty percent (n = 83) had an injury severity score of ≥15 indicating major trauma. The most common fracture type (75%) was simple or wedge comminuted (2B1) according to the Edinburgh classification. The median interval between the injury and operation was 3 days (IQR 1–6). Plate fixation was performed in 110 fractures (80%) and intramedullary fixation was performed in 28 fractures (20%). There were 85 men and 25 women in the plate fixation group with median age of 35 years (IQR 25–45) There were 22 men and six women in the intramedullary fixation group with median age of 31 years (IQR 24–42 years). Statistical analysis was performed using independent sample t test, Mann Whitney test, and Chi square test. Significant P-value was <0.05.ResultsThe overall incidence of complication was 14.5% (n = 20). The overall nonunion rate was 6%. Postoperative wound infection occurred in 3.6% of cases. The incidence of complication associated with plate fixation was 10% (11 of 110 cases) compared to 32% associated with intramedullary fixation (nine of 28 cases; P = 0.003). Thirty-five percent of complications were related to inadequate surgical technique and were potentially avoidable. Symptomatic hardware requiring removal occurred in 23% (n = 31) of patients. Symptomatic metalware was more frequent after plate fixation compared to intramedullary fixation (26% vs 7%, P = 0.03).ConclusionsIntramedullary fixation of midshaft clavicle fracture is associated with a higher incidence of complications. Plate fixation is associated with a higher rate of symptomatic metalware requiring removal compared to intramedullary fixation. Approximately one in three complications may be avoided by attention to adequate surgical technique.     

Does body mass index influence the degree of pelvic tilt produced by a Crawford wedge?

BackgroundA pelvic tilt of 15° is standard practice when positioning a woman for caesarean section, and is commonly produced by tilting the operating table or placing a wedge under the right hip. This study investigated whether body mass index affects the degree of pelvic tilt produced when a wedge is used.MethodsWomen undergoing category 3 and 4 caesarean sections were stratified into three groups according to their body mass index at antenatal booking: ⩽25 kg/m², 25.1–35 kg/m² and >35 kg/m². Twenty women were recruited into each group. Lateral tilt at caesarean section was provided with a Crawford wedge under the right hip and the degree of pelvic tilt was measured using a protractor device.ResultsThe median [range] pelvic tilt angle for the groups in order of ascending body mass index were 15° [12–22°], 19° [11–29°] and 17° [2–28°]. There was a significant increase in the variability of pelvic tilt with increasing body mass index (P = 0.001). The proportion of patients with pelvic tilt <15° was observed to be 20%, 15% and 30% for women of body mass index ⩽25 kg/m², 25.1–35 kg/m² and >35 kg/m², respectively.ConclusionVariability in pelvic tilt increased with body mass index and was greatest with a booking body mass index >35 kg/m².     

Modified Lapidus arthrodesis with plantar plate and compression screw for treatment of hallux valgus with hypermobility of the first ray: A preliminary report

BackgroundTMT-1 arthrodesis is an established method in hallux valgus surgery, but it is technically demanding and typically calls for a period of postoperative immobilization.MethodsIn this cohort study, initial experience with a plantar plate is described. 58 patients (59 arthrodesis) were included.ResultsThe mean duration of protected full weight bearing was 7 weeks. 94.12% patients were satisfied with the results, bony union was achieved in 98.31%. The Foot Function Index improved by 33 to a mean of 8 (p < .001). The postoperative Mayo Clinic Forefoot Score was excellent in 47.04 and good in 47.04%. The mean hallux valgus angle improved by 24.4–13.2° (p < .001). The mean first intermetatarsal angle improved by 11.2–5.2° (p < .001).ConclusionInitial experience with this form of fixation appears to provide suitable stability, allow early-protected weight bearing, with an acceptable level of complications.     

Biomechanical comparison of plate and screw fixation in anterior pelvic ring fractures with low bone mineral density

IntroductionOsteosynthesis of anterior pubic ramus fractures can be challenging, especially in poor bone quality. The aim of the present study was to compare plate and retrograde endomedullary screw fixation of the superior pubic ramus with low bone mineral density (BMD).Materials and methodsTwelve human cadaveric hemi-pelvises were analyzed in a matched pair study design. BMD of the specimens was 35 ± 30 mgHA/cm³, as measured in the fifth lumbar vertebra. A simulated two-fragment superior pubic ramus fracture model was fixed with either a 7.3-mm cannulated retrograde screw (Group 1) or a 10-hole 3.5-mm reconstruction plate (Group 2). Cyclic progressively increasing axial loading was applied through the acetabulum. Relative interfragmentary movements were captured using an optical motion tracking system.ResultsInitial axial construct stiffness was 424 ± 116.1 N/mm in Group 1 and 464 ± 69.7 N/mm in Group 2, with no significant difference (p = 0.345). Displacement and gap angle at the fracture site during cyclic loading were significantly higher in Group 1 compared to Group 2. Cycles to failure, based on clinically relevant criteria, were significantly lower in Group 1 (3469 ± 1837) compared to Group 2 (10,226 ± 3295) (p = 0.028). Failure mode in Group 1 was characterized by screw cutting through the cancellous bone. In Group 2 the specimens exclusively failed by plate bending.ConclusionsFrom biomechanical point of view, pubic ramus stabilization with plate osteosynthesis is superior compared to a single retrograde screw fixation in osteoporotic bone. However, the extensive surgical approach needed for plating must be considered.     

Internal fixation with headless compression screws and back buttress plate for treatment of old Hoffa fracture

Objective： To analyze the early clinical and radiographic outcomes of Hoffa fractures treated by a standard protocol of open reduction and internal fixation using headless compression screws combined with back buttress plate in a consecutive series of 8 Chinese patients. Methods： Open reduction and internal fixation was performed on all patients. The fractures were anatomical- ly reduced and held temporarily by K-wire. If the ends of fractures were atrophic, autologous bone graft from the ipsilateral iliac crest was packed between the ends. Then the fracture fragments were fixed with AO 6.5 mm headless compression cannulated screws. At least two screws were used to provide rotational stability. One pre-contoured reconstruction plate was placed on the nonarticular surface posteromedially or posterolaterally as back buttress plate. Results： All the patients were followed up for at least 12 months （range 12-25 months）. All fractures achieved anatomical reduction and healed clinically and radiographically. At recent follow-up, the mean flexion degree was 120.6° （range 110°-135°） and the mean extension degree was 2.5° （range 0°-5°）. The average visual analogue scale score was 1.6 points （range 0-3）. Six patients were assessed as excellent and 2 as good according to the hospital for special surgery knee score system. There were no superficial or deep infections, or hardware breakages. No patient had giving way or locking of the knee, though some had intermittent pain and swelling after strenuous exercise. Injury mechanism had significant influence on the functional outcome （P=0.046）. Conclusion： Headless compression screws combined with back buttress plate and/or autologous bone grafting to treat old Hoffa fracture is one of effective measures. It would be conducive to not only fracture healing but also early exercise and functional recovery.     

Comparison of different locking plate fixation methods in lateral malleolus fractures

BackgroundSeveral fixation methods may be used for displaced lateral malleolar fractures. We aimed to compare clinical and radiologic outcomes associated with use of locking one third tubular plate vs. anatomical distal fibula locking plate in lateral malleolar fractures.MethodsA total of 62 orthopedic patients operated for lateral malleolus fracture were included in this retrospective study. Patients were divided into two groups regarding the plate used for fixation as locking one third tubular plate (group I; n = 37) and locking anatomical distal fibula plate (group II; n = 25). Data on Danis–Weber ankle fracture classification (Type A, Type B), duration of follow up, clinical outcome [ankle range of motion (ROM), American Orthopaedic Foot & Ankle Society (AOFAS) score], radiological outcomes (adequacy of reduction, loss of alignment), time to fracture healing and complications were recorded in study groups.ResultsNo significant difference was noted between groups in terms of AOFAS score [87.0 (73–100) vs. 85.0 (71–100), respectively (p = 0.339)] and no patients had severe restriction in sagittal and hindfoot motion in both groups. The two groups showed similar healing time [9.0 (7–13) weeks vs. 10.0 (8–13) weeks, respectively (p = 0.355)] and complication rate [0.0% vs. 4.0%, respectively (p = 0.403)].ConclusionsThis study revealed no significant difference between use of locking one third tubular plate and locking anatomical distal fibula plate in lateral malleolar fixation, in terms of clinical and radiological outcomes, complication rates and fracture healing time.     

Management of type IIB and IIIB olecranon fractures. Case series

Objectivesto report and evaluate the functional outcome of plate fixation in comminuted olecranon fractures (Mayo types IIB and IIIB).Method23 consecutive patients with comminuted fractures of the olecranon presenting to our unit Between Feb 2011 and Jan 2015, at a mean follow-up of thirty-six months. Main outcome measurements include radiographic healing, post-operative range of motion, complications, outcome score and patient satisfaction.ResultsOur study included thirteen females and ten males with a mean age of 55(18–97). Fourteen were Mayo type IIB and nine were Mayo type IIIB. Eighteen patients had no complications post-operatively with good outcome with mean oxford score of 45, full rotational ROM and mean flexion arc of 20–130 °. Five patients had range of motion between 40–90 ° with full rotational ROM and mean oxford score of 24. Two patients out of five required metal work removal. No non-unions were noted in our series.ConclusionPlate fixation of complex olecranon fracture is an effective, reliable method of treatment with low risk of non-union. Restoration of a functional flexion arc of movement can be expected with application of correct technique.     

Treatment of proximal fifth metatarsal fractures with an ulna hook plate

IntroductionFractures of the base of the fifth metatarsal bone present one of the commonest fractures of the metatarsal bones. Conventionally intramedullary screws and tension band wiring have been used as internal fixation methods. Lately hook plates have also served as an alternative fixation method. We hereby report on our experience with the hook plate used in treating fractures of the proximal fifth metatarsal.Methods21 patients treated with the hook plate for proximal fifth metatarsal fractures were assessed clinically and radiologically.ResultsAverage time to union in primarily treated fractures (n = 18) was 7.7 weeks (range 4.5-16 weeks). Average time to return of activities of daily living (ADLs) was 10.3 weeks (range 4.5-37 weeks). The average AOFAS midfoot score was 30.4 preoperatively and 95.2 postoperatively (p < 0.01).ConclusionThe ulna hook plate presents a suitable and adequate method of osteosynthesis used to primarily treat proximal fifth metatarsal fractures requiring surgical intervention with satisfactory post-operative outcomes.     

Anterior debridement and bone grafting with posterior single-segment internal fixation for the treatment of mono-segmental spinal tuberculosis

BackgroundsShort-segment or long-segment fixation is the most commonly used method for treating spinal tuberculosis with damage to a single motor segment (mono-segmental spinal tuberculosis). However, these methods incorporate several of the normal adjacent motor segments surrounding the damaged motor segments during surgery and subsequent healing, leaving them prone to adjacent segment degeneration. A single-segment fixation approach may offer an alternative solution for the surgical treatment of mono-segmental spinal tuberculosis.Patients and methods102 Retrospectively studied patients with mono-segmental spinal tuberculosis were divided into two groups: single-segment (the fixed/fused range was limited to only one damaged motion segment n = 54) and short-segment (the fixed/fused range included both the damaged segment and the normal motion segment located above and below the damaged motion segment, respectively n = 48). Responses to postoperative chemotherapy and changes in the Cobb angle for kyphosis, fusion time, and Frankel grading were recorded. Each patient's quality of life and ability to return to work, as determined by the Oswestry Disability Index (ODI), were also evaluated.ResultsAt the end of the final follow-up, the degree of correction was 12.69 ± 4.56° and 13.44 ± 4.53° for the single-segment and short-segment groups, respectively, with a loss of 1.80 ± 1.19° and 1.60 ± 1.16°, respectively. The differences between the two groups were not significant (P > 0.05). The average bone healing time was 4.4 ± 0.9 months in the single-segment group and 4.4 ± 1.0 months in the short-segment group. The Frankel grade for neurologic function returned to normal in >94% of patients. The ODI was 13.5 ± 2.8 and 14.1 ± 3.7 for the single-segment and short-segment groups, respectively. The rates of improvement were 64.0 ± 5.5% and 65.9 ± 4.9% for the single-segment and short-segment groups, respectively. The differences between the two groups were not significant (P > 0.05).ConclusionAfter bone fusion, single-segment fixation is effective in restoring and maintaining spinal stability and retains normal motion segment more than short-segment fixation approach. Strict adherence to the clinical indications must occur in order to optimize the overall outcome.     

Orthogonal plating of intra-articular distal radius fractures with an associated radial column fracture via a single volar approach

IntroductionThe purpose of this study was to investigate the radiographic and functional outcome of orthogonal plating (two plates at right angles) via a single volar approach for fixation of intra-articular distal radius fractures with an associated radial column fracture.MethodsIn a retrospective, chart-based review, we identified 14 consecutive patients with an intra-articular distal radial fracture who had been treated with locked volar plate fixation and an additional radial column plate. Radial column plates were LCP Distal Radius Plates 2.4; volar plates were LCP Distal Radius Plates 2.4 (n = 13) or LCP T-plate (n = 1). These patients were operated on using the extended volar flexor carpi radialis (FCR) approach as described by Orbay. Radiographic measurements, healing rates, time to union, complications, range of motion, the Gartland and Werley score, and the QuickDASH questionnaire were done in order to evaluate the radiographic and functional outcomes of this technique.ResultsThirteen of the 14 fractures healed within 7 weeks after surgery. Two implant removals were done. One patient had malposition of the fracture and carpal tunnel symptoms, which required a second surgery. No other complications (e.g., first dorsal compartment problems, radial plate prominence problems and radial sensory nerve problems) were observed. The average length of follow-up was 30 months (range, 12.8 months to 5.4 years). Radiographic results after healing were radial inclination 20°, radial length 11.4 mm, tilt 6° volar, ulnar variance ?0.5 mm, articular gap 0.1 mm and step-off 0.1 mm. Wrist range of motion was flexion–extension arc 93°, ulnar–radial deviation arc 49° and pronation–supination arc 152°. Nine patients scored ‘excellent’ on the Gartland and Werley score, while the remaining five patients scored ‘good’. The average QuickDASH score was 13.4.ConclusionAdditional fixation of a radial column process in an intra-articular distal radius fracture via the extended FCR approach using a standard volar plate and radial LCP resulted in good/excellent radiographic and functional outcome.Level of evidenceTherapeutic IV.     

How is quality of life after total hip replacement related to the reconstructed anatomy? A study with low-dose stereoradiography

PurposeThe purpose of this study was to evaluate the relationships between the three-dimensional anatomy of operated hip in standing position using low-dose stereo-radiography imaging system and postoperative hip disability and osteoarthritis outcome score (HOOS) after total hip arthroplasty (THA).Material and methodsA total of 123 patients who underwent THA during a one-year period were included. There were 50 men and 73 women with a mean age of 67.3 ± 13.6 (SD) years (range: 19–89 years). All patients underwent pre- and postoperative low-dose stereo-radiography examination and completed a HOOS form (score from 0 to 100, 100 for full satisfaction). We recorded 16 anatomical parameters before THA, and 15 after THA. After binary transformation of HOOS score using 70 as threshold value, outcome was assessed using logistic or generalised linear models.ResultsA total of 103 patients (103/123; 83.7%) had a HOOS score ≥ 70 and were considered as the satisfied group. A significant difference in pelvic incidence (the angle between a line perpendicular to the sacral plate at its midpoint and a line connecting the same point to the centre of the bicoxofemoral axis) was found between the satisfied 56.4 ± 10.4 (SD)° (range: 31–85°) and the unsatisfied group 48.7 ± 8.9 (SD)° (range: 40–65) (P = 0.006). The relative variation of offset (distance from the centre of rotation of the femoral head to a line bisecting the long axis of the femur) compared to the contralateral hip was ?7% in the satisfied group and 7.2% in the unsatisfied group (P = 0.01).ConclusionPelvic incidence, a parameter independent of the reconstructed anatomy, probably influences the quality of life of patients with THA, via pelvic compensatory capabilities. A loss of femoral offset negatively influences the satisfaction of patients.     

Fixation of quadrilateral plate fractures of the acetabulum using the buttress screw: A novel technique

IntroductionQuadrilateral plate fractures constitute one of the most challenging components of acetabular fractures. The objective of this study is to describe and evaluate the novel technique of buttress screw fixation of the quadrilateral plate component of the acetabular fractures.Patients & methodsForty cases of acetabular fracture with associated quadrilateral plate component were included in the study. Mean age was 35 years (range, 16 − 68 years), with a mean follow-up 16.4 months (range, 9 − 36 months). Fixation of the quadrilateral plate was achieved by one or more buttress screws. The screws were inserted through the reconstruction plate, and placed close to the edge of the pelvic brim. To effectively achieve the 3-point fixation principle, the screw was inserted through the plate hole then outside the bone rubbing on the pelvic surface of the quadrilateral plate.ResultsAnatomical reduction of the quadrilateral plate component of the fractures was achieved in all but one patient. The modified Merle D’Aubigné and Postel score was excellent in 13 cases, good in 23 cases, fair in three cases, and poor in one case. No screw displacement or failures were observed during follow-up evaluation. No major complications related to this technique were observed in this series.ConclusionButtress screw fixation of the quadrilateral plate fracture component in associated acetabular fractures is a safe and effective technique for reduction and fixation of these challenging fractures with no major complications related to this novel technique.     

Biomechanical evaluation of the tension band wiring principle. A comparison between two different techniques for transverse patella fracture fixation

PurposeThe aim of this study was to investigate the validity of the dynamic compression principle of tension band wiring in two techniques for patella fracture treatment.MethodsTwelve human cadaveric knees with simulated transverse patella fractures were assigned to two groups for treatment with tension band wiring using either Kirschner (K-) wires or cannulated screws. Biomechanical testing was performed over three knee movement cycles between 90° flexion and 0° full extension. Pressure distribution in the fracture gap and fracture site displacement were evaluated at the 3^rd cycle in 15° steps, namely 90°–75°–60°–45°–30°–15°–0° extension phase and 0°–15°–30°–45°–60°–75°–90° flexion phase.ResultsMean anterior / posterior interfragmentary pressure in the groups with K-wires and cannulated screws ranged within 0.16–0.40 MPa / 0.12–0.35 MPa and 0.37–0.59 MPa / 0.10–0.30 MPa, respectively. These changes remained non-significant for both groups and loading phases (P ≥ 0.171). Mean anterior / posterior fracture site displacement for K-wires and cannulated screws ranged within −0.01–0.53 mm / 0.11–0.74 mm and 0.11–0.55 mm / –0.10–0.50 mm, respectively. Anterior displacement remained without significant changes for both groups and loading phases (P ≥ 0.112). However, posterior displacement underwent a significant increase in the course of knee extension for K-wires (P ≤ 0.047), but not for cannulated screws (P ≥ 0.202). Significantly smaller displacement at the posterior fracture site was detected in the group with cannulated screws compared to K-wires at 60° and 75° extension phase (P ≤ 0.017), as well as at 45°, 60° and 75° flexion phase (P ≤ 0.018). The critical value of 2 mm displacement at the posterior fracture site was not reached for any specimen and fixation technique. Knee extension was accompanied by synchronous increase in quadriceps pulling force.ConclusionsTension band wiring fulfills from a biomechanical perspective the requirements for sufficient stability of transverse patella fracture fixation. It should, however, rather be considered as a static fixation principle than a dynamic one. Tension band wiring with cannulated screws was found advantageous over Kirschner wires in terms of interfragmentary movements at the posterior fracture site.