Improvement of Oral Absorption of Poorly Water-Soluble Drugs by Solid Dispersions with Amphiphilic Phospholipid Polymer

Solid dispersions are one of methods for solubilizing water-insoluble drugs. To enhance the bioavailability, maintenance of the supersaturated state and absorption of the dissolved drug in the gastrointestinal tract are important. We designed and synthesized amphiphilic 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymers as carriers for solid dispersions and evaluated the dissolution behavior in test solutions with different pH and additives. Solid dispersion of troglitazone with amphiphilic MPC copolymers having both aromatic rings and urethane bonds in the side chains showed rapid dissolution and excellent supersaturation maintenance. It was indicated that the balance between the interactions with drug molecules and the water affinity of the polymer should be considered when carriers for solid dispersions are designed. In addition, cell membrane permeability of the solid dispersion with the amphiphilic MPC copolymer was evaluated by the Dissolution / Permeation system, which consists of two liquid chambers and a monolayer of epithelial cells that mimics the intestinal dissolution and permeation process. Further, blood concentration of the drug when solid dispersions were orally administered in mice was also evaluated. The cell membrane permeability and oral absorbability were significantly improved, compared to the solid dispersions with poly(N-vinylpyrrolidone) and suspension or solution of crystalline troglitazone.     

Effect of polymer type on the dissolution profile of amorphous solid dispersions containing felodipine

Amorphous solid dispersions are used as a strategy to improve the bioavailability of poorly water-soluble compounds. When formulating with a polymer, it is important not only for the polymer to stabilize against crystallization in the solid state, but also to improve the dissolution profile through inhibiting crystallization from the supersaturated solution generated by dissolution of the amorphous material. In this study, the dissolution profiles of solid dispersions of felodipine formulated with poly(vinylpyrrolidone) (PVP), hydroxypropyl methylcellulose (HPMC) or hydroxypropyl methylcellulose acetate succinate (HPMCAS) were compared. In addition, concentration versus time profiles were evaluated for the supersaturated solutions of felodipine in the presence and absence of the polymers. HPMCAS was found to maintain the highest level of supersaturation for the greatest length of time for both the dissolution and solution crystallization experiments, whereas PVP was found to be the least effective crystallization inhibitor. All polymers appeared to reduce the crystal growth rates of felodipine at an equivalent supersaturation and this mechanism most likely contributes to the enhanced solution concentration values observed during dissolution of the amorphous solid dispersions.     

Investigating the molecular dissolution process of binary solid dispersions by molecular dynamics simulations

Dissolution molecular mechanism of solid dispersions still remains unclear despite thousands of reports about this technique. The aim of current research was to investigate the molecular dissolution mechanism of solid dispersions by molecular dynamics simulations. The formation of ibuprofen/polymer solid dispersions was modeled by the simulated annealing method. After that, the models of solid dispersions were immersed into the water box with 25–30 Å thicknesses and 50–100 ns MD simulations were performed to all systems. Simulation results showed various dissolution behaviors in different particle sizes and various polymers of solid dispersions. Small-sized particles of solid dispersions dissolved quickly in the water, while the large particles of PEG or PVP-containing solid dispersions gradually swelled in the dissolution process and drug molecules may aggregate together. In the dissolution process, the carboxylic groups of ibuprofen molecules turned its direction from polymer molecules to external water box and then the drug molecules left the polymer coils. At the same time, polymer coils gradually relaxed and became free polymer chains in the solution. In addition, solid dispersion with poloxamer could prevent the precipitate of drug molecules in the dissolution process, which is different from those of PEG or PVP-containing systems. This research provided us clear images of dissolution process of solid dispersions at the molecular level.     

阿瑞匹坦三元超饱和固体分散体的制备及性能考察

目的：为了提高难溶性药物阿瑞匹坦(Aprepitant,APR)的溶解度,解决其酸中溶出、碱中结晶沉淀的问题,选择不同功能的聚合物载体,采用热熔挤出技术制备三元固体分散体,并对其进行性能考察;方法：采用溶剂-熔融法制备二元固体分散体,以溶出度和溶出速度为指标,筛选具有增溶功能的载体材料。通过介质转移法考察各聚合物在不同浓度的药物溶液中的抑晶性能,筛选出最佳的沉淀抑制剂。确定药载比,将APR、溶出促进剂及沉淀抑制剂以不同比例混合,采用热熔挤出技术制备三元固体分散体,以溶出度和抑晶时间为指标,优选出三元固体分散体处方。经XRD确认药物在载体中的存在状态,考察该三元固体分散体在模拟肠液中的动态溶解度和加速条件下的物理稳定性。结果：亲水性聚合物PVP K30制备的二元固体分散体溶出速度快,增溶效果佳,肠溶性聚合物HPMCAS显示出优越的抑晶作用,延长了APR的过饱和点,质量比为1:1:3(APR:PVP K30:HPMCAS)的三元固体分散体在酸中迅速完全释放(120min溶出95%),相对于原料药显著提高了溶出度和溶出速率,当介质pH转为6.8后,三元固体分散体完全释放并在6h内维持溶液处于高过饱和的稳定状态,药物以无定形形式存在于载体基质中,同时能在加速条件下保持至少三个月的无定形状态。结论：基于不同聚合物的理化特性,本研究制备的三元固体分散体通过协调溶出速率和结晶抑制效果,不仅显著提高APR的溶解度,并能解决APR在胃中溶出、肠中沉淀析晶的问题,具有良好的溶出特性。     

Improving the oral bioavailability of albendazole in rabbits by the solid dispersion technique

We have investigated the oral bioavailability of granules of albendazole, a drug used for treating echinococcosis in man, prepared by the solid dispersion technique. Rapid dissolution and supersaturation were observed when hydroxypropylmethylcellulose and hydroxypropylmethylcellulose phthalate were used as carriers in the solid dispersion. They inhibited the crystallization of albendazole from the supersaturated solution and maintained an amorphous state for 8 h. Gastric acidity-controlled rabbits were used to evaluate the variation in absorption after oral administration of the albendazole solid dispersion. For rabbits with low gastric acidity the bioavailability of orally administered albendazole in the granular form prepared by solid dispersion was more than three times that of albendazole in physical mixtures. These results suggest that the bioavailability of albendazole in solid dispersions might be high even if there is a great variation in the gastric pH of patients.     

Crosslinked hydrogels—a promising class of insoluble solid molecular dispersion carriers for enhancing the delivery of poorly soluble drugs

Water-insoluble materials containing amorphous solid dispersions (ASD) are an emerging category of drug carriers which can effectively improve dissolution kinetics and kinetic solubility of poorly soluble drugs. ASDs based on water-insoluble crosslinked hydrogels have unique features in contrast to those based on conventional water-soluble and water-insoluble carriers. For example, solid molecular dispersions of poorly soluble drugs in poly(2-hydroxyethyl methacrylate) (PHEMA) can maintain a high level of supersaturation over a prolonged period of time via a feedback-controlled diffusion mechanism thus avoiding the initial surge of supersaturation followed by a sharp decline in drug concentration typically encountered with ASDs based on water-soluble polymers. The creation of both immediate- and controlled-release ASD dosage forms is also achievable with the PHEMA based hydrogels. So far, ASD systems based on glassy PHEMA have been shown to be very effective in retarding precipitation of amorphous drugs in the solid state to achieve a robust physical stability. This review summarizes recent research efforts in investigating the potential of developing crosslinked PHEMA hydrogels as a promising alternative to conventional water-soluble ASD carriers, and a related finding that the rate of supersaturation generation does affect the kinetic solubility profiles implications to hydrogel based ASDs.KEY WORDS: Amorphous solid dispersions, Crosslinked hydrogels, Poly(2-hydroxyethylmethacrylate), Supersaturation, Kinetic solubility     

Comparison of HPMC based polymers performance as carriers for manufacture of solid dispersions using the melt extruder

Preparation of amorphous solid dispersions using hot-melt extrusion process for poorly water soluble compounds which degrade on melting remains a challenge due to exposure to high temperatures. The aim of this study was to develop a physically and chemically stable amorphous solid dispersion of a poorly water-soluble compound, NVS981, which is highly thermal sensitive and degrades upon melting at 165 °C. Hydroxypropyl Methyl Cellulose (HPMC) based polymers; HPMC 3cps, HPMC phthalate (HPMCP) and HPMC acetyl succinate (HPMCAS) were selected as carriers to prepare solid dispersions using hot melt extrusion because of their relatively low glass transition temperatures. The solid dispersions were compared for their ease of manufacturing, physical stability such as recrystallization potential, phase separation, molecular mobility and enhancement of drug dissolution. Two different drug loads of 20 and 50% (w/w) were studied in each polymer system. It was interesting to note that solid dispersions with 50% (w/w) drug load were easier to process in the melt extruder compared to 20% (w/w) drug load in all three carriers, which was attributed to the plasticizing behavior of the drug substance. Upon storage at accelerated stability conditions, no phase separation was observed in HPMC 3cps and HPMCAS solid dispersions at the lower and higher drug load, whereas for HPMCP, phase separation was observed at higher drug load after 3 months. The pharmaceutical performance of these solid dispersions was evaluated by studying drug dissolution in pH 6.8 phosphate buffer. Drug release from solid dispersion prepared from polymers used for enteric coating, i.e. HPMCP and HPMCAS was faster compared with the water soluble polymer HPMC 3cps. In conclusion, of the 3 polymers studied for preparing solid dispersions of thermally sensitive compound using hot melt extrusion, HPMCAS was found to be the most promising as it was easily processible and provided stable solid dispersions with enhanced dissolution.     

Physicochemical characterization and in vitro dissolution studies of solid dispersions of ketoprofen with PVP K30 and d-mannitol

Aim of the present study was to improve the solubility and dissolution rate of poorly water soluble, BCS class-II drug Ketoprofen (KETO) by solid-dispersion approach. Solid dispersions were prepared by using polyvinylpyrrolidone K30 (PVP K30) and d-mannitol in different drugs to carrier ratios. Dispersions with PVP K30 were prepared by kneading and solvent evaporation techniques, whereas solid dispersions containing d-mannitol were prepared by kneading and melting techniques. These formulations were characterized in the liquid state by phase-solubility studies and in the solid state by Differential Scanning Calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The aqueous solubility of KETO was favored by the presence of both carriers. The negative values of Gibbs free energy illustrate the spontaneous transfer from pure water to the aqueous polymer environment. Solid state characterization indicated KETO was present as fine particles in d-mannitol solid dispersions and entrapped in carrier matrix of PVP K30 solid dispersions. In contrast to the very slow dissolution rate of pure KETO, dispersions of drug in carriers considerably improved the dissolution rate. This can be attributed to increased wettability and dispersibility, as well as decreased crystallinity and increase in amorphous fraction of drug. Solid dispersions prepared with PVP K30 showed the highest improvement in dissolution rate of KETO. Even physical mixtures of KETO prepared with both carriers also showed better dissolution profiles than those of pure KETO.     

An investigation into the dissolution properties of celecoxib melt extrudates: understanding the role of polymer type and concentration in stabilizing supersaturated drug concentrations

In this study, the dissolution properties of celecoxib (CX) solid dispersions manufactured from Eudragit 4155F and polyvinylpyrrolidone (PVP) were evaluated. Hot-melt extrusion (HME) technology was used to prepare amorphous solid dispersions of drug/polymer binary systems at different mass ratios. The drug concentrations achieved from the dissolution of PVP and Eudragit 4155F solid dispersions in phosphate buffer, pH 7.4 (PBS 7.4) were significantly greater than the equilibrium solubility of CX (1.58 μg/mL). The degree of supersaturation increased significantly as the polymer concentration within the solid dispersion increased. The maximum drug concentration achieved by PVP solid dispersions did not significantly exceed the apparent solubility of amorphous CX. The predominant mechanism for achieving supersaturated CX concentrations in PBS 7.4 was attributed to stabilization of amorphous CX during dissolution. Conversely, Eudragit 4155F solid dispersions showed significantly greater supersaturated drug solutions particularly at high polymer concentrations. For example, at a drug/polymer ratio of 1:9, a concentration of 100 μg/mL was achieved after 60 min that was stable (no evidence of drug recrystallization) for up to 72 h. This clearly identifies the potential of Eudragit 4155F to act as a solubilizing agent for CX. These findings were in good agreement with the results from solubility performed using PBS 7.4 in which Eudragit 4155F had been predissolved. In these tests, Eudragit 4155F significantly increased the equilibrium solubility of CX. Solution (1)H NMR spectra were used to identify drug/polymer interactions. Deshielding of CX aromatic protons (H-1a and H-1b) containing the sulfonamide group occurred as a result of dissolution of Eudragit 4155F solid dispersions, whereas deshielding of H-1a protons and shielding of H-1b protons occurred as a result of the dissolution of PVP solid dispersions. In principle, it is reasonable to suggest that the different drug/polymer interactions observed give rise to the variation in dissolution observed for the two polymer/drug systems.     

Optimization for glimepiride dissolution enhancement utilizing different carriers and techniques

The present work is a comparative study that matches between carriers and techniques used to prepare solid mixtures with glimepiride. The study is directed towards elucidation of the most promising carrier capable of highly improving drug dissolution along with the most successful technique used for drug formulation. Mixtures were tested for drug content and dissolution. The most optimum formulae were characterized by DSC, IR and XRPD. Kinetic treatment of dissolution data was performed for physical and co-ground mixtures, solid dispersions and their adsorbates, triple solid dispersions and their adsorbates, microwave generated or treated solid dispersions. Results revealed that enhancing effect mostly reached maximum with ternary solid dispersion adsorbate (TSDads). The latter technique demonstrated a dramatic increase in drug dissolution rate which was reflected in the shortest half-life for most carriers at variable degrees. The highest dissolution rate was attained with pregelatinized starch and decreased to variable degrees with remaining carriers. Differences were ascribed to chemical nature as well as relative water solubility of carriers. The combined effects of incorporating surfactants, polymers and adsorbents to glimepiride contributed together to improve wetting, reduce crystallinity and caused substantial increase in the surface area which made TSDads the most promising technique for enhancing dissolution of glimepiride.     

Physicochemical properties of tadalafil solid dispersions – Impact of polymer on the apparent solubility and dissolution rate of tadalafil

To improve solubility of tadalafil (Td), a poorly soluble drug substance (3 μg/ml) belonging to the II class of the Biopharmaceutical Classification System, its six different solid dispersions (1:1, w/w) in the following polymers: HPMC, MC, PVP, PVP-VA, Kollicoat IR and Soluplus were successfully produced by freeze-drying. Scanning electron microscopy showed a morphological structure of solid dispersions typical of lyophilisates. Apparent solubility and intrinsic dissolution rate studies revealed the greatest, a 16-fold, increase in drug solubility (50 μg/ml) and a significant, 20-fold, dissolution rate enhancement for the Td/PVP-VA solid dispersion in comparison with crystalline Td. However, the longest duration of the supersaturation state in water (27 μg/ml) over 24 h was observed for the Td solid dispersion in HPMC. The improved dissolution of Td from Td/PVP-VA was confirmed in the standard dissolution test of capsules filled with solid dispersions. Powder X-ray diffraction and thermal analysis showed the amorphous nature of these binary systems and indicated the existence of dispersion at the molecular level and its supersaturated character, respectively. Nevertheless, as evidenced by film casting, the greatest ability to dissolve Td in polymer was determined for PVP-VA. The crystallization tendency of Td dispersed in Kollicoat IR could be explained by the low T_g (113 °C) of the solid dispersion and the highest difference in Hansen solubility parameters (6.8 MPa^0.5) between Td and the polymer, although this relationship was not satisfied for the partially crystalline dispersion in PVP. Similarly, no correlation was found between the strength of hydrogen bonds investigated using infrared spectroscopy and the physical stability of solid dispersions or the level of supersaturation in aqueous solution.     

Binary polymeric blends to microencapsulate nitroflurbiprofen: physicochemical and in silico studies.

Nitroflurbiprofen, NFP, a practically insoluble liquid drug, was microencapsulated in hydrophilic micromatrices made of poly(N-vinylpyrrolidone) (PVP), or polyaminomethacrylate (PAMA), or binary blends of polymers thereof. The PAMA/PVP miscibility was assessed both in the solid state (DSC and ATF-FTIR spectroscopy) and in solution by viscometric measurements. The in vitro NFP release test was carried out in over saturation condition to discriminate the increase of NFP apparent solubility (supersaturation degree, SD). Drug/polymer/polymer/water interactions were studied in silico by molecular dynamic (MD) simulations. PAMA and PVP resulted miscible only in aqueous solution. The release of NFP from microparticles occurred according to a non-monotonic pattern due to the formation of instable supersaturated systems and the drug separation in the dissolution medium. After 5 min, the SD was at least 3. The use of PVP/PAMA micromatrices reduced the instability of the supersaturated solutions. MD simulations evidenced that water molecules play a key role in the PAMA/PVP compatibilization process and in stabilization of NFP supersaturated systems by means of H-bond. The docking analyses here find a novel and successful application to predict the different ability of a drug to interact with polymeric blends in solution.     

Miniaturized screening of polymers for amorphous drug stabilization (SPADS): Rapid assessment of solid dispersion systems

PurposeDevelopment of a novel, rapid, miniaturized approach to identify amorphous solid dispersions with maximum supersaturation and solid state stability.MethodThree different miniaturized assays are combined in a 2-step decision process to assess the supersaturation potential and drug–polymer miscibility and stability of amorphous compositions. Step 1: SPADS dissolution assay. Drug dissolution is determined in 96-well plates to detect systems that generate and maintain supersaturation. Promising combinations graduate to step 2. Step 2: SPADS interaction and SPADS imaging assays. FTIR microspectroscopy is used to study intermolecular interactions. Atomic force microscopy is applied to analyze molecular homogeneity and stability. Based on the screening results, selected drug–polymer combinations were also prepared by spray-drying and characterized by classical dissolution tests and a 6-month physical stability study.ResultsFrom the 7 different polymers and 4 drug loads tested, EUDRAGIT® E PO at a drug load of 20% performed best for the model drug CETP(2). The classical dissolution and stability tests confirmed the results from the miniaturized assays.ConclusionThe results demonstrate that the SPADS approach is a useful de-risking tool allowing the rapid, rational, time- and cost-effective identification of polymers and drug loads with appropriate dual function in supersaturation performance and amorphous drug stabilization.     

Solution Behavior of PVP-VA and HPMC-AS-Based Amorphous Solid Dispersions and Their Bioavailability Implications

Purpose

To identify the mechanism behind the unexpected bio-performance of two amorphous solid dispersions: BMS-A/PVP-VA and BMS-A/HPMC-AS.

Methods

Solubility of crystalline BMS-A in PVP-VA and HPMC-AS was measured by DSC. Drug-polymer interaction parameters were obtained by Flory-Huggins model fitting. Drug dissolution kinetics of spray-dried dispersions were studied under sink and non-sink conditions. BMS-A supersaturation was studied in the presence of pre-dissolved PVP-VA and HPMC-AS. Potency and crystallinity of undissolved solid dispersions were determined by HPLC and DSC. Polymer dissolution kinetics were obtained by mass balance calculation. Bioavailability of solid dispersions was assessed in dogs.

Results

In solid state, both polymers are miscible with BMS-A, while PVP-VA solublizes the drug better. BMS-A dissolves similarly from both solid dispersions in vitro regardless of dissolution method, while the HPMC-AS dispersion performed much better in vivo. At the same concentration, HPMC-AS is more effective in prolonging BMS-A supersaturation; this effect was negated by the slow dissolution rate of HPMC-AS. Further study revealed that fast PVP-VA dissolution resulted in elevated drug loading in undissolved dispersions and facilitated drug recrystallization before complete release. In contrast, the hydrophobicity and slower HPMC-AS dissolution prevented BMS-A recrystallization within the HPMC-AS matrix for >24?h.

Conclusions

The lower bioavailability of PVP-VA dispersion was attributed to BMS-A recrystallization within the undissolved dispersion, due to hydrophilicity and fast PVP-VA dissolution rate. Polymer selection for solid dispersion development has significant impact on in vivo performance besides physical stability.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Dissolution rate enhancement and physicochemical characterization of carbamazepine-poloxamer solid dispersions

This study investigates the potential of poloxamers as solid dispersions (SDs) carriers in improving the dissolution rate of a poorly soluble drug, carbamazepine (CBZ). Solid dispersions were prepared with poloxamer 188 (P188) and poloxamer 407 (P407) by melting method in different drug:carrier ratios (1:1, 1:2 and 1:3). Prepared samples were characterized using differential scanning calorimetry (DSC), hot-stage polarized light microscopy (HSM), powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FT-IR) to investigate drug physical state within the SDs matrix, possible polymorphic transitions and drug-polymer interactions. The interactions between CBZ molecules and polymeric chains were also evaluated using molecular dynamics simulation (MDS) technique. The most thermodynamically stable polymorphic form III of CBZ was present in all SDs, regardless of the type of poloxamer and drug-to-carrier ratio. The absence of drug-polymer interactions was observed by FT-IR analysis and additionally confirmed by MDS. Formation of persistent hydrogen bond between two CBZ molecules, observed by MDS indicate high tendency of CBZ molecules to aggregate and form crystalline phase within dispersion. P188 exhibit higher efficiency in increasing CBZ dissolution rate due to its more pronounced hydrophilic properties, while increasing poloxamers concentration resulted in decreasing drug release rate, as a consequence of their thermoreversible gelation.     

Effect of excipients on dissolution enhancement of aceclofenac solid dispersions studied using response surface methodology: a technical note

The aim of present study was to enhance the dissolution rate of poorly water-soluble drug aceclofenac by solid dispersion technique using corn starch, dicalcium phosphate, lactose, and microcrystalline cellulose as carriers. Solid dispersions were prepared by solvent wetting method using 3² full factorial design for each of the carrier. The prepared solid dispersions were evaluated for differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy (FTIR), and angle of repose. In vitro dissolution studies were carried out in phosphate buffer (pH 7.5) and 0.1 N HCl (pH 1.2). The results of solid state characterization bring to view that in solid dispersions the crystalline drug gets converted to its amorphous form. FTIR study results indicated the absence of interaction between aceclofenac and carriers. For prepared solid dispersions, angle of repose was found to be in the range of 26.19° to 35.29°, which indicates good flowability. Enhanced drug dissolution was obtained with carrier in order lactose > corn starch > microcrystalline cellulose > dicalcium phosphate. Hence, these carriers could be used to enhance the dissolution rate of poorly water-soluble drug.     

In sight into tadalafil - block copolymer binary solid dispersion: Mechanistic investigation of dissolution enhancement

Tadalafil is a phosphodiesterase-5 inhibitor that is characterized by low solubility and high permeability. Solid dispersion approach represents a promising carrier system for effective enhancement of dissolution and oral bioavailability of poorly soluble drugs. In the present work, novel tadalafil-loaded solid dispersions employing various block copolymers (Pluronics(?)) were prepared through fusion technique. Their solubility and dissolution properties were compared to the drug alone. In order to elucidate the mechanism of dissolution enhancement, solid state characteristics were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry and powder X-ray diffraction. Furthermore, contact angle measurements were carried out. The sign and magnitude of the thermodynamic parameters indicated spontaneity of solubilization process. The phase solubility studies revealed A(L) type of curves for the carriers. Unlike traditional solid dispersion systems, the crystal form of drug in the formulated systems could not be converted to amorphous form. Most of the studied grades showed dissolution improvement vis-à-vis pure drug, with Pluronic F-127 as the most promising carrier. Mathematical modeling of in vitro dissolution data indicated the best fitting with Korsemeyer-Peppas model. Thus, the results demonstrated that tadalafil/Pluronic F-127 solid dispersion system is a direct and feasible technology which represents a potential candidate for delivering a poorly water-soluble drug with enhanced solubility and dissolution.     

Utility of Hydroxypropylmethylcellulose Acetate Succinate (HPMCAS) for Initiation and Maintenance of Drug Supersaturation in the GI Milieu

Purpose  To identify materials and processes which effect supersaturation of the GI milieu for low solubility drugs in order to increase oral bioavailability. Methods  A variety of small and polymeric molecules were screened for their ability to inhibit drug precipitation in supersaturated solutions. The best polymeric materials were utilized to create spray-dried dispersions (SDDs) of drug and polymer, and these were tested for drug form and homogeneity. Dispersions were tested in vitro for their ability to achieve and maintain drug supersaturation, for a variety of drug structures. Results  Of the 41 materials tested, HPMCAS was the most effective at maintaining drug supersaturation. Drug/HPMCAS SDDs were consistently more effective at achieving and maintaining drug supersaturation in vitro than were SDDs prepared with other polymers. Drug/HPMCAS SDDs were effective in vitro for eight low solubility drugs of widely varying structure. Drug/HPMCAS SDDs were more effective at achieving and maintaining supersaturation than were rotoevaporated Drug/HPMCAS dispersions or physical mixtures of Drug and HPMCAS. The degree of achievable drug supersaturation increased with increasing polymer content in the SDD. The drug in Drug /HPMCAS SDDs was amorphous, and the dispersions were demonstrated to have a single glass transition and were thus homogeneous. Conclusion  HPMCAS has been identified as a uniquely effective polymer for use in SDDs of low solubility drugs, with broad applicability across a variety of drug structures and properties.