Surgical approach for high-energy posterior tibial plateau fractures

Background:

High-energy fractures of posterior tibial plateau always need surgical treatment. Generally, posterior fragments of these fractures could not be exposed and reduced well in conventional anterior approaches. Although a posterolateral/posteromedial approach to manage posterior tibial plateau fractures can achieve satisfactory results, there are few presentations concerning the treatment of these high-energy injuries based on posterior approaches combined with anterior approach if necessary.

Materials and Methods:

Ten cases of posterior tibial plateau fractures from high-energy injuries were retrospectively reviewed and followed up for mean 26.5 months (range 14–45 months). A posterolateral/posteromedial approach was adopted primarily to fix main fragment in posterior tibial plateau, and intraoperative assessment of the stability of knee was done. An anterior approach was added if required.

Results:

Posterolateral approach was employed in seven cases, posteromedial in three, and additional anteromedial in three, and anterolateral in two cases. The average time to union of all 10 fractures was 3.7 months (range 3–5.5 months). Nine patients had satisfactory articular reduction. The range of motion of the knee averaged 2° of extension to 110.5° of flexion. No patient complained of knee instability. The average postoperative HSS score at the final followup was 92.70.

Conclusions:

High-energy fractures of posterior tibial plateau could be well treated based on posterior approaches combined with necessary anterior approach if required.     

Results of a modified posterolateral approach for the isolated posterolateral tibial plateau fracture

Background:

There are few posterolateral approaches that do not require the common peroneal nerve (CPN) dissection. With the nerve exposure, it would pose a great challenge and sometimes iatrogenic damage over the surgical course. The purpose was to present a case series of patients with posterolateral tibial plateau fractures treated by direct exposure and plate fixation through a modified posterolateral approach without exposing the common peroneal nerve (CPN).

Materials and Methods:

9 consecutive cases of isolated posterior fractures of the posterolateral tibial plateau were operated by open reduction and plate fixation through the modified posterolateral approach without exposing the CPN between June 2009 and January 2012. Articular reduction quality was assessment according to the immediate postoperative radiographs. At 24 month followup, all patients had radiographs and were asked to complete a validated outcome measure and the modified Hospital for Special Surgery (HSS) Knee Scale.

Results:

All patients were followedup, with a mean period of 29 months (range 25–40 months). Bony union was achieved in all patients. In six cases, the reduction was graded as best and in three cases the reduction was graded as middle according to the immediate postoperative radiographs by the rank order system. The average range of motion arc was 127° (range 110°–134°) and the mean postoperative HSS was 93 (range 85–97) at 24 months followup. None of the patients sustained neurovascular complication.

Conclusions:

The modified posterolateral approach through a long skin incision without exposing the CPN could help to expand the surgical options for an optimal treatment of this kind of fracture, and plating of posterolateral tibial plateau fractures would result in restoration and maintenance of alignment. This approach demands precise knowledge of the anatomic structures of this region.     

Effect of partial and complete posterior cruciate ligament transection on medial meniscus: A biomechanical evaluation in a cadaveric model

Background:

The relationship between medial meniscus tear and posterior cruciate ligament (PCL) injury has not been exactly explained. We studied to investigate the biomechanical effect of partial and complete PCL transection on different parts of medial meniscus at different flexion angles under static loading conditions.

Materials and Methods:

Twelve fresh human cadaveric knee specimens were divided into four groups: PCL intact (PCL-I), anterolateral bundle transection (ALB-T), posteromedial bundle transection (PMB-T) and PCL complete transection (PCL-T) group. Strain on the anterior horn, body part and posterior horn of medial meniscus were measured under different axial compressive tibial loads (200-800 N) at 0°, 30°, 60° and 90° knee flexion in each groups respectively.

Results:

Compared with the PCL-I group, the PCL-T group had a higher strain on whole medial meniscus at 30°, 60° and 90° flexion in all loading conditions and at 0° flexion with 400, 600 and 800 N loads. In ALB-T group, strain on whole meniscus increased at 30°, 60° and 90° flexion under all loading conditions and at 0° flexion with 800 N only. PMB-T exihibited higher strain at 0° flexion with 400 N, 600 N and 800 N, while at 30° and 60° flexion with 800 N and at 90° flexion under all loading conditions.

Conclusions:

Partial PCL transection triggers strain concentration on medial meniscus and the effect is more pronounced with higher loading conditions at higher flexion angles.     

In Vivo Motion of Femoral Condyles During Weight-Bearing Flexion After Anterior Cruciate Ligament Rupture Using Biplane Radiography

The purpose of this study was to investigate in vivo three- dimensional tibiofemoral kinematics and femoral condylar motion in knees with anterior cruciate ligament (ACL) deficiency during a knee bend activity. Ten patients with unilateral ACL rupture were enrolled. Both the injured and contralateral normal knees were imaged using biplane radiography at extension and at 15°, 30°, 60°, 90°, and 120° of flexion. Bilateral knees were next scanned by computed tomography, from which bilateral three-dimensional knee models were created. The in vivo tibiofemoral motion at each flexion position was reproduced through image registration using the knee models and biplane radiographs. A joint coordinate system containing the geometric center axis of the femur was used to measure the tibiofemoral motion. In ACL deficiency, the lateral femoral condyle was located significantly more posteriorly at extension and at 15° (p < 0.05), whereas the medial condylar position was changed only slightly. This constituted greater posterior translation and external rotation of the femur relative to the tibia at extension and at 15° (p < 0.05). Furthermore, ACL deficiency led to a significantly reduced extent of posterior movement of the lateral condyle during flexion from 15° to 60° (p < 0.05). Coupled with an insignificant change in the motion of the medial condyle, the femur moved less posteriorly with reduced extent of external rotation during flexion from 15° to 60° in ACL deficiency (p < 0.05). The medial- lateral and proximal-distal translations of the medial and lateral condyles and the femoral adduction-abduction rotation were insignificantly changed after ACL deficiency. The results demonstrated that ACL deficiency primarily changed the anterior-posterior motion of the lateral condyle, producing not only posterior subluxation at low flexion positions but also reduced extent of posterior movement during flexion from 15° to 60°.

Key Points

• Three-dimensional tibiofemoral kinematics and femoral condylar motion in ACL-deficient knees during upright weight-bearing flexion were measured using biplane radiography with the geometric center axis.
• ACL deficiency caused posterior subluxation of the lateral condyle with excess external femoral rotation at early flexion positions.
• On flexion from 15° to 60°, the lateral condyle moved slightly posteriorly in ACL deficiency leading to reduced extent of external femoral rotation.

Key words: anterior cruciate ligament, injury, kinematics, tibiofemoral, femoral condyle, radiography     

Measurement technique of calcaneal varus from axial view radiograph

Background:

Medial displaced posterior calcaneal tubercle creates varus deformity of an intraarticular calcaneal fracture. The fracture involves posterior calcaneal facet and the calcaneal body so we developed a measurement technique representing the angle between posterior facet and long axis of calcaneus using lateral malleolus and longitudinal bone trabeculae of posterior calcaneal tubercle as references to obtain calcaneal varus angle.

Materials and Methods:

52 axial view calcaneal radiographs of 26 volunteers were studied. Angles between posterior facet and long axis of calcaneus were measured using the measurements 1 and 2. Angle of measurement 1, as gold standard, was obtained from long axis and posterior facet of calcaneus whereas measurement 2 was obtained from a line, perpendicular to apex curve of lateral cortex of the lateral malleolus and a line parallel to the longitudinal bone trabeculae of posterior calcaneal tubercle. No more than 3° of difference in the angle of both measurements was accepted. Reliability of the measurement 2 was statistically tested.

Results:

Angles of measurement 1 and 2 were 90.04° ± 4.00° and 90.58° ± 3.78°. Mean of different degrees of both measurements was 0.54° ± 2.31° with 95% of confidence interval: 0.10°-1.88°. The statistical analysis of measurement 1 and 2 showed more than 0.75 of ICC and 0.826 of Pearson correlation coefficient.

Conclusion:

Technique of measurement 2 using lateral malleolus and longitudinal bone trabeculae of posterior calcaneal tubercle as references has strong reliability for representing the angle between long axis and posterior facet of calcaneus to achieve calcaneal varus angle.     

Outcome of angular stable locking plate fixation of tibial plateau fractures Midterm results in 101 patients

Background:

Articular reconstruction and stable fixation of tibial plateau fractures and its various subtypes continue to represent a surgical challenge. Only few trials have studied results following angular stable plate fixation. The present study aimed to investigate the clinical, radiological, functional and quality of life results following tibial plateau fractures using angular stable plate fixation.

Materials and Methods:

101 patients were retrospectively studied using functional (ROM; KSS; VAS), radiographic (osteoarthritis score, loss of reduction) and quality of life (WOMAC; Lysholm) scores. There were 46 males and 55 females. The average of patients was 51 years (range 22-77 years). Study groups were assigned according to the AO fracture classification.

Results:

Mean followup was 57 ± 30 months. Fracture type distribution revealed a significantly (P < 0.001) increased number of type B- (62.4%) compared to C-fractures. Functional assessment showed a significantly better total KSS (84.1 ± 15.6 vs. 74.7 ± 18.0; P = 0.01) as well as ROM (active: 124°±17° vs. 116°±15°, P = 0.014; passive: 126°±18° vs. 118 ± 14°, P = 0.017) in the B-fracture group. VAS was found to be markedly higher (P = 0.0039) following type C-fractures. Rating osteoarthritis secondary to a tibial plateau fracture as a function of injury severity (r = 0.485; P < 0.001) and relating the loss of reduction to the grade of evolving osteoarthritis (r = 0.643; P < 0.001) a positive correlation was found. Quality of life showed significantly improved results for Lysholm score (P = 0.004) following B-fractures with low overall values for the WOMAC score.

Conclusion:

Presented data provide sufficient evidence that anatomic restoration of tibial plateau fractures with angular stable plate fixation result in decreased loss of reduction and declined incidence of posttraumatic osteoarthritis, thereby providing acceptable mid to long term outcome.     

Acetabular roof arc angles and anatomic biomechanical superior acetabular weight bearing area

Background:

Acetabular fracture involves whether superior articular weight bearing area and stability of the hip are assessed by acetabular roof arc angles comprising medial, anterior and posterior. Many previous studies, based on clinical, biomechanics and anatomic superior articular surface of acetabulum showed different degrees of the angles. Anatomic biomechanical superior acetabular weight bearing area (ABSAWBA) of the femoral head can be identified as radiographic subchondral bone density at superior acetabular dome. The fracture passes through ABSAWBA creating traumatic hip arthritis. Therefore, acetabular roof arc angles of ABSAWBA were studied in order to find out that the most appropriate degrees of recommended acetabular roof arc angles in the previous studies had no ABSAWBA involvement.

Materials and Methods:

ABSAWBA of femoral head was identified 68 acetabular fractures and 13 isolated pelvic fractures without unstable pelvic ring injury were enrolled. Acetabular roof arc angle was measured on anteroposterior, obturator and iliac oblique view radiographs of normal contralateral acetabulum using programmatic automation controller digital system and measurement tools.

Results:

Average medial, anterior and posterior acetabular roof arc angles of the ABSAWBA of 94 normal acetabulum were 39.09 (7.41), 42.49 (8.15) and 55.26 (10.08) degrees, respectively.

Conclusions:

Less than 39°, 42° and 55° of medial, anterior and posterior acetabular roof arc angles involve ABSAWBA of the femoral head. Application of the study results showed that 45°, 45° and 62° from the previous studies are the most appropriate medial, anterior and posterior acetabular roof arc angles without involvement of the ABSAWBA respectively.     

Impact of Partial and complete rupture of anterior cruciate ligament on medial meniscus: A cadavaric study

Background:

The clinical relationship between medial meniscus tear and anterior cruciate ligament (ACL) rupture has been well documented. However, the mechanism of this clinical phenomenon is not exactly explained. Our aim is to investigate the biomechanical impact of partial and complete ACL rupture on different parts of medial meniscus.

Materials and Methods:

Twelve fresh human cadaveric knee specimens were divided into four groups: ACL intact (ACL-I), anteromedial bundle transection (AMB-T), posterolateral bundle transection (PLB-T), and ACL complete transection (ACL-T) group. Strain on the anterior horn, body part, and posterior horn of medial meniscus were measured under 200 N axial compressive tibial load at 0°, 30°, 60°, and 90° of knee flexion, respectively.

Results:

Compared with the control group (ACL-I), the ACL-T group had a higher strain on whole medial meniscus at 0°, 60°, and 90° of flexion. But at 30°, it had a higher strain on posterior horn of meniscus only. As to PLB-T group, strain on whole meniscus increased at full extension, while strain increased on posterior horn at 30° and on body of meniscus at 60°. However, AMB-T only brought about higher strain at 60° of flexion on body and posterior horn of meniscus.

Conclusions:

Similar to complete rupture, partial rupture of ACL can also trigger strain concentration on medial meniscus, especially posterior horn, which may be a more critical reason for meniscus injury associated with chronic ACL deficiency.     

An unusual stress fracture: Bilateral posterior longitudinal stress fracture of tibia

INTRODUCTION

Stress fractures (SF) occur when healthy bone is subjected to cyclic loading, which the normal carrying range capacity is exceeded. Usually, stress fractures occur at the metatarsal bones, calcaneus, proximal or distal tibia and tends to be unilateral.

PRESENTATION OF CASE

This article presents a 58-year-old male patient with bilateral posterior longitudinal tibial stress fractures. A 58 years old male suffering for persistent left calf pain and decreased walking distance for last one month and after imaging studies posterior longitudinal tibial stress fracture was detected on his left tibia. After six months the patient was admitted to our clinic with the same type of complaints in his right leg. All imaging modalities and blood counts were performed and as a result longitudinal posterior tibial stress fractures were detected on his right tibia.

DISCUSSION

Treatment of tibial stress fracture includes rest and modified activity, followed by a graded return to activity commensurate with bony healing. We have applied the same treatment protocol and our results were acceptable but our follow up time short for this reason our study is restricted for separate stress fractures of the posterior tibia.

CONCLUSION

Although the main localization of tibial stress fractures were unilateral, anterior and transverse pattern, rarely, like in our case, the unusual bilateral posterior localization and longitudinal pattern can be seen.     

Unstable Jefferson fractures: Results of transoral osteosynthesis

Background:

Majority of C₁ fractures can be effectively treated conservatively by immobilization or traction unless there is an injury to the transverse ligament. Conservative treatment usually involves a long period of immobilization in a halo-vest. Surgical intervention generally involves fusion, eliminating the motion of the upper cervical spine. We describe the treatment of unstable Jefferson fractures designed to avoid these problems of both conservative and invasive methods.

Materials and Methods:

A retrospective review of 12 patients with unstable Jefferson fractures treated with transoral osteosynthesis of C₁ between July 2008 and December 2011 was performed. A steel plate and C₁ lateral mass screw fixation were used to repair the unstable Jefferson fractures. Our study group included eight males and four females with an average age of 33 years (range 23-62 years).

Results:

Patients were followed up for an average of 16 months after surgery. Range of motion of the cervical spine was by and large physiologic: Average flexion 35° (range 28-40°), average extension 42° (range 30-48°). Lateral bending to the right and left averaged 30° and 28° respectively (range 12-36° and 14-32° respectively). The average postoperative rotation of the atlantoaxial joint, evaluated by functional computed tomography scan was 60° (range 35-72°). Total average lateral displacement of the lateral masses was 7.0 mm before surgery (range 5-12 mm), which improved to 3.5 mm after surgery (range 1-6.5 mm). The total average difference of the atlanto-dens interval in flexion and extension after surgery was 1.0 mm (range 1-3 mm).

Conclusions:

Transoral osteosynthesis of the anterior ring using C₁ lateral mass screws is a viable option for treating unstable Jefferson fractures, which allows maintenance of rotation at the C₁-C₂ joint and restoration of congruency of the atlanto-occipital and atlantoaxial joints.     

Elbow dislocation with irreparable fracture radial head

Background:

Treatment of elbow dislocation with irreparable radial head fracture needs replacement of radial head to achieve stability of elbow. An alternate method in cases of elbow dislocation with radial head fracture can be resection of radial head with repair of medial collateral ligament. We report a retrospective analysis of cases of elbow dislocation with irreparable radial head treated by excision head of radius and repair of MCL.

Materials and Methods:

Nine patients of elbow dislocation with associated irreparable fractures of the head of the radius were included in this analysis (6 F:3 M, Age: 35-47 years). Radial head excision was done through the lateral approach and MCL was sutured using no 3 Ethibond using medial approach. Above elbow plaster was given for 6 weeks and gradual mobilization was done thereafter. All patients were assessed at final followup using Mayo elbow performance score (MEPS).

Results:

Mean followup was 19.55 ± 7.12 months (range 14-36 months). There was no extension deficit when compared to opposite side with mean range of flexion of 138.8° ± 6.97° (range 130 -145°). Mean pronation was 87.7° ± 4.4° (range 80-90°) and mean supination was 87.7 ± 4.62° (range 80-90°). The mean MEPS was 98.8 ± 3.33 (range 90-100). No patient had pain, sensory complaints, subluxation or redislocation. All were able to carry out their daily activities without disability.

Conclusion:

Radial head excision with MCL repair is an acceptable option for treatment of patients with elbow dislocation and irreparable radial head fracture.     

Medial proximal tibial angle after medial opening wedge HTO: A retrospective diagnostic test study

Background:

Medial proximal tibial angle (MPTA) is the commonly used angle, which is simply measured from the knee radiographs. It can determine the correction angle in medial opening wedge high tibial osteotomy (MOWHTO). The hypothesis of our study is that post-osteotomy MPTA can predict the change in correction angle, and we aimed to determine the optimal MPTA with which to prevent recurrent varus deformity after MOWHTO.

Materials and Methods:

Between January 2002 and April 2010, radiographs of 59 patients, who underwent 71 MOWHTOs using the locking-compression osteotomy plates without bone grafts, were evaluated for the change of the MPTA. The MPTA was measured preoperatively and one and twelve months postoperatively. The changes of MPTA between one and twelve months were classified into valgus, stable, and varus change. The predicting factors were analyzed using analysis of variance (ANOVA) and Bonferroni multiple comparisons. The receiver operating characteristic (ROC) curve was used to find out the cut off point for preventing the recurrent varus deformity.

Results:

The overall preoperative, and one and twelve month postoperative MPTA values were 84.4 ± 2.4°, 97.2 ± 4.1°, and 96.3 ± 3.6°, respectively. Between one and twelve months, 39 knees displayed reduced varus change (–2.8 ± 2.1°), 18 knees displayed no change, and 14 knees displayed a greater valgus change (+2.9 ± 2.1°). The best factor for predicting these changes was the one month MPTA value (P = 0.006). By using the ROC curve, a one month MPTA of 95° was analyzed as the cut off point for preventing the recurrent varus deformity. With MPTA ≥95°, 92.3% of the osteotomies exhibited stable or varus change and 7.7% exhibited valgus change. However, with MPTA <95°, 47.4% exhibited stable or varus change and 52.6% exhibited valgus change (P < 0.001, odds ratio = 13.3).

Conclusion:

The postoperative MPTA can be used to predict the change in correction angle and an MPTA of at least 95° is the crucial angle with which to prevent recurrent varus deformity.     

Primary total elbow arthroplasty

Background:

Primary total elbow arthroplasty (TEA) is a challenging procedure for orthopedic surgeons. It is not performed as frequently as compared to hip or knee arthroplasty. The elbow is a nonweight-bearing joint; however, static loading can create forces up to three times the body weight and dynamic loading up to six times. For elderly patients with deformity and ankylosis of the elbow due to posttraumatic arthritis or rheumatoid arthritis or comminuted fracture distal humerus, arthroplasty is one of the option. The aim of this study is to analyze the role of primary total elbow arthroplasty in cases of crippling deformity of elbow.

Materials and Methods:

We analyzed 11 cases of TEA, between December 2002 and September 2012. There were 8 females and 3 males. The average age was 40 years (range 30-69 years). The indications for TEA were rheumatoid arthritis, comminuted fracture distal humerus with intraarticular extension, and posttraumatic bony ankylosis of elbow joint. The Baksi sloppy (semi constrained) hinge elbow prosthesis was used. Clinico-radiological followup was done at 1 month, 3 months, 6 months, 1 year, and then yearly basis.

Results:

In the present study, average supination was 70° (range 60-80°) and average pronation was 70° (range 60-80°). Average flexion was 135° (range 130-135°). However, in 5 cases, there was loss of 15 to 35° (average 25°) of extension (45°) out of 11 cases. The mean Mayo elbow performance score was 95.4 points (range 70-100). Arm length discrepancy was only in four patients which was 36% out of 11 cases. Clinico-radiologically all the elbows were stable except in one case and no immediate postoperative complication was noted. Radiolucency or loosening of ulnar stem was seen in 2 cases (18%) out of 11 cases, in 1 case it was noted after 5 years and in another after 10 years. In second case, revision arthroplasty was done, in which only ulnar hinge section, hinge screw and lock screw with hexagonal head were replaced.

Conclusion:

Elbow arthroplasty remains a valuable option for deformed and ankylosed elbows especially in the demanding patients with crippling deformity of the elbow.     

Percutaneous kyphoplasty combined with the posterior screw-rod system in treatment of osteoporotic thoracolumbar fractures

Background:

The osteoporotic vertebral compression fractures (OVCF) have attracted more and more attention due to increase in life span globally and aging population. Percutaneous vertebroplasty (PVP) and percutaneous kyphoplasty (PKP) have been popularized rapidly by virtue of their unique advantage in minimal invasiveness. We analysed our results in osteoporotic thoracolumbar fractures using percutaneous kyphoplasty and posterior screw rod system. To investigate the possibility of treatment of rupture of the posterior vertebral osteoporotic fractures by means of kyphoplasty combined with the posterior screw-rod system.

Materials and Methods:

Twenty six patients (65 years of age or older) with the single spine fractures included in study. The preoperative bone mineral density was measured by dual-energy X-ray. The PKP was done in all the cases. Decompression was done if neurological symptoms were present.

Results:

The results demonstrated osteoporosis with BMD T value ≤ −2.5; injured posterior vertebral body (3 cases) had shown the whole damage accompanied by neurological symptoms through X-ray or CT. After 2 days, the remaining patients of back pain symptoms were relieved or disappeared except for three cases of patients with decompression incision. VAS score and Cobb angle changed from preoperative 8.23 ± 0.17 and 28.7 ± 0.33° respectively to postoperative 3.77 ± 0.44 and 3.8 ± 0.2° respectively.

Conclusion:

Treatment of rupture of the posterior vertebral osteoporotic thoracolumbar fractures by means of kyphoplasty combined with posterior screw-rod system is a safe, effective procedure.     

Morphological characteristics of Schatzker type IV tibial plateau fractures: a computer tomography based study

Purpose

The objective of this study was to evaluate the morphological characteristics of Schatzker type IV tibial plateau fractures.

Methods

A retrospective analysis of radiographic and computed tomographic data of tibial plateau Schatzker type IV fractures from January 2010 to December 2011 was conducted in a level 1 trauma centre. The medial fracture angle (MFA), surface area percentage (SAP), and medial fracture height (MFH) were measured on CT images using the Picture Archiving and Communication System.

Results

Based on the location of fracture and the MFA, 75 cases of Schatzker type IV fracture were divided into three subtypes: anteromedial fracture (seven cases, 9.3 %), total medial plateau fracture (36 cases, 48 %), and posteromedial fracture (32 cases, 42.7 %). The anteromedial fracture was located on the anterior part of the medial plateau, the average MFA was positive 47.5°, the SAP was 38.3 % and the MFH was 41.6 mm. The total medial plateau fracture usually involved the entire medial plateau, the mean value of MFA was 81.2°, the SAP was 53.9 % and the MFH was 64.0 mm. The posteromedial fracture was located on the posterior part of the medial plateau, the MFA was negative 42.5°, the SAP was 32.4 % and the MFH was 44.8 mm.

Conclusion

The direction and location of Schatzker type IV fractures are highly variable. Proper operative approach and fixation method should be selected based on the morphological characteristics of individual medial plateau fractures.     

Comparison of outcome of tibial plafond fractures managed by hybrid external fixation versus two-stage management with final plate fixation

Background:

Tibial platfond fractures are usually associated with massive swelling of the foot and ankle, as well as with open wounds. This swelling may cause significant decrease of the blood flow, so the state of the soft tissue is determinant for the surgical indication and the type of implant. This retrospective study compares the union times in cases of tibial plafond fractures managed with a hybrid external fixation as a definitive procedure versus those managed with a two stage strategy with final plate fixation.

Materials and Methods:

A retrospective study in a polytrauma referral hospital was performed between 2005 and 2011. Patients with a tibial plafond fracture, managed with a hybrid external fixation as a definitive procedure or managed with a two stage strategy with the final plate fixation were included in the study. Postoperative radiographs were evaluated by two senior surgeons. Fracture healing was defined as callus bridging of one cortex, seen on both lateral and anteroposterior X-ray. The clinical outcome was evaluated by means of 11 points Numerical Rating Scale for pain and The American Orthopedic Foot and Ankle Society ankle score, assessed at the last followup visit. Thirteen patients had been managed with a hybrid external fixation and 18 with a two-stage strategy with the final plate fixation. There were 14 males and 17 females with a mean age of 48 years (range 19–82 years). The mean followup was 24 months (range 24–70 months).

Results:

The mean time from surgery to weight bearing was 7 ± 6.36 days for the hybrid fixation group and 57.43 ± 15.46 days for the plate fixation group (P < 0.0001); and the mean time from fracture to radiological union was 133.82 ± 37.83) and 152.8 ± 72.33 days respectively (P = 0.560).

Conclusion:

Besides the differences between groups regarding the baseline characteristics of patients, the results of this study suggest that in cases of tibial plafond fractures, the management with a hybrid external fixation as a definitive procedure might involve a faster union than a two-stage management with final plate fixation.     

The Influence of Tibial Positioning on the Diagnostic Accuracy of Combined Posterior Cruciate Ligament and Posterolateral Rotatory Instability of the Knee

Background

To determine if tibial positioning affects the external rotation of the tibia in a dial test for posterolateral rotatory instability combined with posterior cruciate ligament (PCL) injuries.

Methods

Between April 2007 and October 2007, 16 patients with a PCL tear and posterolateral rotatory instability were diagnosed using a dial test. The thigh-foot angle was measured at both 30° and 90° of knee flexion with an external rotation stress applied to the tibia in 2 different positions (reduction and posterior subluxation). The measurements were performed twice by 2 orthopedic surgeons.

Results

In posterior subluxation, the mean side-to-side difference in the thigh-foot angle was 11.56 ± 3.01° at 30° of knee flexion and 11.88 ± 4.03° at 90° of knee flexion. In the sequential dial test performed with the tibia reduced, the mean side-to-side difference was 15.94 ± 4.17° (p < 0.05) at 30° of knee flexion and 16.88 ± 4.42° (p = 0.001) at 90° of knee flexion. The mean tibial external rotation was 5.31 ± 2.86° and 6.87 ± 3.59° higher in the reduced position than in the posterior subluxation at both 30° and 90° of knee flexion.

Conclusions

In the dial test, reducing the tibia with an anterior force increases the ability of an examiner to detect posterolateral rotary instability of the knee combined with PCL injuries.     

Outcome of Total Knee Arthroplasty After High Tibial Osteotomy: Does Malalignment Jeopardize the Results when Using a Posterior-Stabilized Arthroplasty?

Background

The controversy regarding the outcome of total knee arthroplasties after high tibial osteotomy may relate to malalignment secondary to overcorrection after high tibial osteotomy (HTO) [1, 2] and to the type of arthroplasty itself (posterior-stabilized arthroplasty or posterior cruciate ligament-retaining prosthesis).

Questions/Purpose

We asked two questions: (1) Would a posterior-stabilized arthroplasty provide sufficient constrain and improve pain and function in patients with severe malalignment due to a previous HTO? (2) Will malalignment of the previous HTO jeopardize the long-term results of a total knee reconstruction with a posterior-stabilized implant?

Patients and Methods

We retrospectively reviewed 25 posterior-stabilized TKAs in 25 patients with severe valgus deformity after HTO (ranging from 10° to 20° of valgus) and compared the results with a series of matched 25 posterior-stabilized TKAs in 25 patients with normocorrection after HTO ranging from 5° of valgus to 5° of varus. Clinical, operative, and radiographic data were reviewed. Minimum follow-up was 10 years after the arthroplasty (average, 15 years; range, 10–20 years).

Results

All the knees had standard posterior-stabilized total knee arthroplasty implants. Patients with an overcorrected HTO were more likely to require a soft tissue release to balance the knee. However, Average Knee Society and Function Score improved, respectively, from 48 to 85 and from 50 to 90 points in the severely overcorrected group, versus, respectively, 50 to 89 and 52 to 97 in the normocorrected group, but the range of mobility was superior for patients with normal alignment. Fifteen-year survivorship after the arthroplasty comparison showed no significant difference between the two groups (one revision in each group).

Conclusions

Patients with an overcorrected HTO are more likely to require a soft tissue release to balance the knee. However, both groups show improvements in function and pain. With a posterior-stabilized arthroplasty, the degree of deformity has no impact on the longevity of the TKA.

Electronic supplementary material

The online version of this article (doi:10.1007/s11420-013-9344-x) contains supplementary material, which is available to authorized users.     

Outcome of Schatzker type V and VI tibial plateau fractures

Background:

Schatzker type V and VI tibial fractures are complex injuries, usually treated with open reduction and internal fixation (ORIF) using dual plates or ring fixators. ORIF has the advantage of not requiring pin tract care, but has a higher infection rate, especially in open fractures. We have combined the advantages of these two methods to treat these difficult fractures.

Materials and Methods:

Ten Schatzker type V and 11 Schatzker type VI fractures were treated between 2006 and 2010. ORIF with dual plates was performed, only if there was marked articular displacement (> 2 mm) in a closed fracture. All other fractures including open fractures and closed fractures with soft tissue compromise or minimal articular displacement were treated with ring fixators. The outcomes were analyzed and documented using the Honkonen and Jarvinen subjective, clinical, functional, and radiological criteria and the Western Ontario and McMaster Universities Arthritis Index (WOMAC).

Results:

Nine closed fractures with marked articular displacement (> 2 mm) were treated with dual plates. Eight closed fractures with minimal articular displacement (< 2 mm) and poor skin condition and four open fractures were treated with ring fixators. The mean follow-up period was 2 ½ years. The mean postoperative knee flexion was 128°. All patients could walk, jump, and climb steps. 90% could squat, though only 50% could duck walk properly. Radiologically, 85% had a plateau tilt of less than 5°, 92% had an articular step of less than 2 mm, and a residual articular widening of less than 5 mm. There were no major infections. Two patients had minor pin tract infections and two requested that their plates be removed subsequently.

Conclusion:

The protocol used to treat Schatzker type V and VI tibial plateau fractures has had excellent results and we suggest that all open fractures be treated with ring fixators and that ORIF should be done only for closed fractures with marked displacement.     

Walking ability in patients with arthrogryposis multiplex congenita

Background:

Arthrogryposis multiplex congenita (AMC) is a multiple joint condition which affects both lower and upper extremities and thus affects ambulation. Multiple surgeries are needed to correct limb deformity in order to promote walking. The objective of this study is to identify the most critical residual deformity that diminishes the ambulatory status.

Materials and Methods:

51 patients were included in this study, 14 patients were nonambulatory. The mean age at first surgery was 4.1 years (range 2-16 years). The mean length of followup was 44.0 months (range 22-168 months). Type of procedures and number of operations, residual deformity and walking ability were recorded. Residual deformity including hip flexion contracture more than 30°, knee flexion contracture more than 30°, scoliosis, hip dysplasia or dislocation, knee extension contracture or recurvatum, active motion of hips and knees and upper limb involvement were evaluated. Statistical analysis was done to evaluate factors that were statistically significant to affect walking ability in AMC patients.

Results:

At the latest followup, 31 patients were community ambulators, 3 patients were household ambulators, 3 patients were nonfunctional ambulatory, and 14 patients were nonambulatory. There were an average of 4.3 surgeries per patient. Statistical analysis of all factors was done and the results were significant with a P < 0.037 in knee flexion contracture >30 degrees with odds ratio of 4.58. Hip flexion contracture >30° was a trend toward significant with a P value of 0.058 and odds ratio of 4.53. Multivariate analysis showed that knee flexion contracture was significant with 4.58 (95% CI 1.01-20.6).

Conclusion:

AMC is a rare disease that causes disability, requiring multiple surgeries to correct deformities. Our study showed that residual knee flexion contracture was associated with nonambulatory status of patients with AMC.