A novel hydrogel with super stability and toughness is obtained by polymerizing acrylamide and maleic acid in the presence of poly(vinyl alcohol) chains. Then the hydrogel is processed with dry‐anneal and loading with cation solution method in order to construct a polymer network containing covalent, crystalline, and ionic cross‐links. Various hydrogels are measured via tensile and compressive tests to determine the optimal preparation and mechanical properties of hydrogels. The hydrogels show high tensile stress of ≈ 8 MPa and toughness of ≈ 25.4 MJ m?3. The hydrogel exhibits good chemical stability that remained up to 93% of original strength after 12 h soaking in phosphate buffered saline. Finally, an energy dissipation mechanism is discussed.
A convenient one‐pot method for the controlled synthesis of polystyrene‐block‐polycaprolactone (PS‐b‐PCL) copolymers by simultaneous reversible addition–fragmentation chain transfer (RAFT) and ring‐opening polymerization (ROP) processes is reported. The strategy involves the use of 2‐(benzylsulfanylthiocarbonylsulfanyl)ethanol (1) for the dual roles of chain transfer agent (CTA) in the RAFT polymerization of styrene and co‐initiator in the ROP of ε‐caprolactone. One‐pot polymerizations using the electrochemically stable ROP catalyst diphenyl phosphate (DPP) yield well‐defined PS‐b‐PCL in a relatively short reaction time (≈4 h; = 9600?43 600 g mol?1; / = 1.21?1.57). Because the hydroxyl group is strategically located on the Z substituent of the CTA, segments of these diblock copolymers are connected through a trithiocarbonate group, thus offering an easy way for subsequent growth of a third segment between PS and PCL. In contrast, an oxidatively unstable Sn(Oct)2 ROP catalyst reacts with (1) leading to multimodal distributions of polymer chains with variable composition.
Supramolecular hydrogels composed of poly(ethylene glycol) (PEG) containing polymer and α‐cyclodextrins (α‐CDs) show great potential in drug delivery. Herein, PEGylated magnetic nanoparticles (MNPs) and gold nanoparticles (AuNPs) of ≈10 nm are synthesized in the presence of poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMA) grafted poly(acrylic acid) copolymers (PPEGMA‐co‐PAA, P1) and PPEGMA grafted poly(2‐(dimethylamino)ethyl methacrylate) copolymers (PPEGMA‐co‐PDMAEMA, P2), respectively. The produced PEGylated NPs are hybridized into supramolecular hydrogels by mixing them with α‐CDs through inclusion complexation between PEG branches and α‐CDs. As a result, supramolecular hydrogels hybridized with inorganic MNPs and AuNPs are prepared and characterized by rheological measurements, X‐ray diffraction, and scanning electron microscopy. Both MNP and AuNP hybrid hydrogels show reversible sol–gel transition, which is stimulated by changes in temperature and pH. The nanoparticles hybridized in the hydrogels can be released gradually in the process of hydrogel disruption. These hydrogels may have potential applications in biomaterials and drug delivery.
Alternating copolymers of an oligopeptide (N3‐GVGV‐N3, where G: glycine; V: valine) and an oligothiophene (5,5′‐bis(ethynyl)‐3,3'‐dioctyltetrathiophene) are prepared by click chemistry. The experimental results discover that these copolymers exhibit strong molecular‐weight‐dependent self‐assembly behaviors. The copolymer P1 with the lowest weight‐average molecular weight ( = 7400 g mol?1), assembles into well‐ordered fibrous nanostructures. P3 ( = 16 980 g mol?1) assembles into nanoballs. P2, which has the medium between P1 and P3, ( = 14 800 g mol?1), exhibits more‐complicated self‐assembly behaviors, more like a transition state between the other two. All of the results suggest the self‐assembly ability of these oligopeptide segments might be the major reason for the nano‐structure evolution.
A new synthetic strategy is developed for the synthesis of polyphosphazene bearing stable nitroxide radicals as a pendant group. The resulting material is investigated as a cathode‐active material for rechargeable lithium–ion batteries that performs 80 mAh g−1 capacities at a C/2 current density over 50 cycles. Thus, the inorganic–organic hybrid system can be proposed as an alternative cathode‐active material with improved performance.
Propagation rate coefficient values, k p, reported by several groups for radical polymerization of bulk vinyl acetate are critically evaluated. All data are obtained by the combination of pulsed‐laser polymerization and subsequent polymer analysis by size exclusion chromatography, as recommended by the IUPAC Working Party on Modeling of Polymerization Kinetics and Processes. Although a small (≈15%) increase in k p is observed as laser pulse repetition rate is increased from low (25–100 Hz) to high (300–500 Hz) values, all of the data fulfill the required consistency criteria and thus are combined into a benchmark set covering the temperature range of 5–70 °C. The data are fitted well by an Arrhenius relation resulting in a pre‐exponential factor of 1.35 × 107 L mol−1 s−1 and an activation energy of 20.4 kJ mol−1, with 95% confidence ellipsoids for the parameters also presented.
A type of conjugated polymer ( P3 ) with the feature of aggregation‐induced emission enhancement, and with diphenylphosphoryl‐triazole (DPPT) attachment, was successfully synthesized by Cu+‐catalyzed click postpolymerization. P3 displayed specific optical response toward Ag+ in organic/aqueous mixtures with relatively high‐water‐fraction ratio (VTHF/Vwater = 2:3). With the addition of Ag+, absorption profile of P3 exhibited obvious redshift (≈ 30 nm), accompanied by the decrease of absorbance and fluorescence (at ≈ 500 nm). As evaluated from the detailed fluorescence alteration of P3 against incremental Ag+, the detection limit of Ag+ reached ≈ 11 × 10?9m (3σ, S/N = 3). The presence of other common background metal ions brought insignificant interference for the Ag+ probing by P3 . Further investigation revealed that the presence of DPPT segment played a key role for the detection of Ag+ by P3 .
Porous organic frameworks (POFs) have been synthesized by Yamamoto‐type Ullmann cross‐coupling reaction using tetrakis (4‐bromophenyl) methane (TBPM) and poly‐4‐bromostyrene (PBS) as monomers. Among these POFs, JUC‐Z13 synthesized solely from PBS is found to be microporous (1.27 nm) and SBET = 372 m2 g?1, and copolymerization with TBPM results in POFs with apparent surface areas up to 3137 m2 g?1 and pore size up to 1.41 nm. Interestingly, JUC‐Z14 and JUC‐Z15 show hierarchical porosity. Low pressure gas uptake experiments on activated JUC‐Z13‐JUC‐Z19 show enhanced gas storage capacities and isosteric heats of sorption (Qst) among porous materials.
A great extent of past work has focused on the development of stimuli‐responsive hydrogels that can primarily achieve a two‐state transition, such as sol‐gel translation. In the current work, a reversible hydrogel with three‐state transition is designed. The three transformations between original, oxidized, and reduced states are achieved via controlling the external stimuli conditions. Hydrogels in their original state possess a weak self‐healing property and negligible fluidity. The oxidized state hydrogel can keep molding, however, losing the self‐healing property. In contrast, the reduced state hydrogels exhibit strong self‐healing property. Moreover, the hydrogel becomes injectable subsequent to dithiothreitol addition. Thereafter, under UV‐light irradiation or NaClO immersion, the hydrogels can be remolded to any desired shapes. These properties provide novel designing strategies and potential applications for smart and reusable materials.
Cyclodextrin (CD)‐based host–guest interactions are one of the important supramolecular interactions and have been playing significant role in the design of self‐healing materials due to high selectivity and dynamic equilibrium. However, a deeper understanding of the self‐healing mechanism is still rare, although self‐healing materials based on CD–guest interactions have many advantages. This study provides a first step for the fundamental understanding of the influence factors on self‐healing behavior of materials containing CD–guest complexes. It is found that the healing motifs are CD–guest interactions. Sufficient polymer chains mobility, a small amount of water, and high inclusion constant (K ) of host–guest interactions are also essential to the self‐healing process. The threshold of K value is around 102 M−1.
In this work, an agarose/poly(acrylamide‐co‐acrylic acid) interpenetrating network hydrogel is prepared by the photopolymerization of acrylamide, acrylic acid, and N ,N ′‐methylenebisacrylamide within agarose network at its gel state. The as‐prepared hydrogel exhibits two independent kinds of shape memory effects. The thermal‐activated shape memory behavior is attributed to the reversible coil‐helix transformation of agarose, within the permanently cross‐linked poly(acrylamide‐co‐acrylic acid) network; the light triggered shape recovery is driven by the dissociation of the complexes between carboxyl groups and Fe(III) ions, due to the photoreduction of Fe(III) to Fe(II) in the presence of citric acid. The versatile and simple strategy as presented here should be beneficial for the design of dual‐activated shape memory hydrogels and foster their use in a number of fields such as biomaterials, soft robotics, smart actuators, and sensors.
Double thermosensitive clay/P(MEO2MA‐co‐POEGMA) nanocomposite (NC) hydrogels are prepared by in situ free radical polymerization of 2‐(2‐methoxyethoxy) ethyl methacrylate (MEO2MA) and oligo(ethylene glycol) methacrylate (OEGMA) in the presence of physical cross‐linker clay. The temperature‐induced phase transition behavior of NC hydrogels is investigated by turbidity, temperature dependent nuclear magnetic resonance, and variable temperature Fourier transform infrared spectroscopy. 2D infrared analysis is employed to study the sequential order of changes of all groups in NC hydrogels during the heating and cooling process. The obtained novel clay/P(MEO2MA‐co‐POEGMA) NC hydrogels exhibit an unusual thermally induced multistep aggregation process and successively undergo three consecutive microstructural changes: “loose clay/polymer microaggregation ? homogeneous network structure ? dense clay/polymer macroaggregation.” Dynamic light scattering and transmission electron microscopy measurements show similar results of the NC nanogel at the same temperature regions, confirming the three consecutive microstructural changes. This new generation of thermosensitive hydrogel offers promising potential for applications as smart devices, biomedical materials, and drug carriers.
Reverse iodine transfer polymerization (RITP) of 1,1,2,2‐tetrahydroperfluorodecyl acrylate (FDA) is successfully performed in supercritical carbon dioxide (scCO2) at 70 °C under a CO2 pressure of 300 bar. PolyFDA (PFDA) of increasing molecular weights (from 10 000 to 100 000 g mol?1) is synthesized with good agreement between theoretical, 1H NMR spectroscopy and and size exclusion chromatography/refractive index/right‐angle laser‐light scattering/differential viscometer (SEC/RI/RALLS/DV)‐estimated molecular weights (). Furthermore, the increase of goes with a decrease of the dispersity of the polymers (? from 2.06 to 1.33), which is consistent with a controlled radical polymerization (CRP). Lastly, the structure of final PFDA and therefore the RITP process are confirmed by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses.
Ion transport and selectivity are compared across a polymer inclusion membrane (PIM) containing dicyclohexano‐18‐crown‐6 (DCH18C6, K+ selective) under two driving forces: concentration gradient (diffusion) and electrical potential gradient (migration). The K+ flux is much larger under diffusion (140 mmol cm?2 h?1) than under migration (≈4 mmol cm?2 h?1). The selectivity of NH4+ over K+ is 86.0 for diffusion and 1.0 for migration. The selectivity of Na+ over K+ is 21.4 for diffusion and 1.16 for migration. Migration transport might induce a change in the orientation of DCH18C6 and reduce selectivity. Therefore, it is more favorable to apply diffusion rather than migration.
Iron‐mediated atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N‐methylpyrrolidin‐2‐one (NMP) solution is investigated via online VIS/NIR spectroscopy up to 2500 bar. The activation–deactivation equilibrium constant, KATRP, decreases towards higher NMP content due to the formation of catalytically less active FeII/NMP species. The reaction volume increases from 1 to 15 cm3 mol?1 in passing from 16 to 92 mol% NMP. The same effects are observed for monomer‐free model systems with poly(MMA)–Br as the initiator. Investigations into iron‐catalyzed ATRP of MMA in less polar solvents or even without an additional solvent (i.e., for bulk ATRP) yield KATRP values, which are by two to three orders of magnitude higher than in the presence of NMP.
The cationic polymerization of 1,3‐pentadiene using a tert‐butyl chloride (tBuCl)/TiCl4 initiating system in CH2Cl2 at different reaction conditions is reported. It is shown that the reaction rate increases with the increase of the tBuCl/TiCl4 molar ratio, while the molecular weight distribution becomes narrower. Well‐defined oligo(1,3‐pentadiene)s ( ≤ 3500 g mol?1; / ≤ 3.0) are obtained at high tBuCl/TiCl4 molar ratio (340) and low temperature (–78 °C). 1H and 13C NMR spectroscopy studies reveal the presence of tert‐butyl head and –CH2–Cl end groups. The number‐average functionalities (Fns) at the α‐ and ω‐ends are calculated to be Fn(tBu) > 1 and Fn(Cl) < 1, respectively. The general mechanism of 1,3‐pentadiene polymerization is proposed.
Copolymerization of carbon dioxide (CO2) and propylene oxide (PO) is employed to generate amphiphilic polycarbonate block copolymers with a hydrophilic poly(ethylene glycol) (PEG) block and a nonpolar poly(propylene carbonate) (PPC) block. A series of poly(propylene carbonate) (PPC) di‐ and triblock copolymers, PPC‐b‐PEG and PPC‐b‐PEG‐b‐PPC, respectively, with narrow molecular weight distributions (PDIs in the range of 1.05–1.12) and tailored molecular weights (1500–4500 g mol?1) is synthesized via an alternating CO2/propylene oxide copolymerization, using PEG or mPEG as an initiator. Critical micelle concentrations (CMCs) are determined, ranging from 3 to 30 mg L?1. Non‐ionic poly(propylene carbonate)‐based surfactants represent an alternative to established surfactants based on polyether structures.
A new fluoro‐containing four‐arm organosiloxane has been successfully synthesized, which can be easily converted to a cross‐linked network, showing water uptake of below 0.12 wt% (maintained in boiling water for 72 h) and dielectric constant of below 2.56 with dissipation factor of near 1.8 × 10−3 at 30 MHz, as well as showing high transparency and good thermostability. These data indicate that this new organosiloxane is suitable as an adhesive or sealant for the applications in microelectronic industry.
Dendrigraft poly(l ‐lysine) (DGL) polyelectrolytes, obtained by iterative polycondensation of N‐trifluoroacetyl‐l ‐lysine‐N‐carboxyanhydride, constitute very promising candidates in many biomedical applications. In order to get a better understanding of their structure–property relationships in these applications, their absolute average molecular weights have to be accurately measured. Size‐exclusion chromatography coupled to a multi‐angle laser‐light‐scattering detector (SEC‐MALLS) is known to be the most appropriate analytical tool. These measurements require the determination of the refractive index increment, dn/dc, of these highly branched polycationic macromolecules in aqueous solution. This optical property has to be measured in the same aqueous conditions as SEC‐MALLS eluents. Consequently, data are determined and discussed as a function of different aqueous SEC‐MALLS eluents, as well as different counter‐ions of the many ammonium groups of DGL (generation 3, DGL‐3, used as a model herein). The resulting number‐average molecular weights, , are found to be very dissimilar when the measured dn/dc values are directly considered. In contrast, very close values are obtained (average = 18 700, standard error of 1110 g mol?1) with a low coefficient of variation for such data (ca. 6% for six analyses), when the dn/dc are corrected by the exact lysine amount (measured by the total Kjeldahl nitrogen method).
Anionic polymerization of n‐butyl acrylate (nBA) in toluene initiated with a binary initiator, isopropyl α‐lithioisobutyrate/ethylaluminum bis(2,6‐di‐tert‐butylphenoxide) at ?60 °C, is terminated with ethyl α‐(chloromethyl)acrylate (ECMA) to afford a poly(nBA) possessing an acryloyl group at the terminal with 80% of termination efficiency. The reactivity of nBA against a polymer anion of methyl methacrylate formed under identical conditions is estimated relative to the termination with ECMA by reacting a mixture of nBA and ECMA followed by 1H NMR spectroscopic chain‐end analysis; the relative reactivity of nBA is found 80 times or more higher than ECMA.
下载免费PDF全文