Ability of Different Polymers to Inhibit the Crystallization of Amorphous Felodipine in the Presence of Moisture

Purpose To investigate the ability of various polymers to inhibit the crystallization of amorphous felodipine from amorphous molecular dispersions in the presence of absorbed moisture. Methods Spin coated films of felodipine with poly(vinylpyrrolidone) (PVP), hydroxypropylmethylcellulose acetate succinate (HPMCAS) and hydroxypropylmethylcellulose (HPMC) were exposed to different storage relative humidities and nucleation rates were measured using polarized light microscopy. Solid dispersions were further characterized using differential scanning calorimetry, infrared spectroscopy and gravimetric measurement of water vapor sorption. Results It was found that the polymer additive reduced nucleation rates whereas absorbed water enhanced the nucleation rate as anticipated. When both polymer and water were present, nucleation rates were reduced relative to those of the pure amorphous drug stored at the same relative humidity, despite the fact that the polymer containing systems absorbed more water. Differences between the stabilizing abilities of the various polymers were observed and these were explained by the variations in the moisture contents of the solid dispersions caused by the different hygroscopicities of the component polymers. No correlations could be drawn between nucleation rates and the glass transition temperature (T _g) of the system. PVP containing solid dispersions appeared to undergo molecular level changes on exposure to moisture which may be indicative of phase separation. Conclusions In conclusion, it was found that for a given storage relative humidity, although the addition of a polymer increases the moisture content of the system relative to that of the pure amorphous drug, the crystallization tendency was still reduced.     

Effect of Temperature and Moisture on the Physical Stability of Binary and Ternary Amorphous Solid Dispersions of Celecoxib

The effectiveness of different polymers, alone or in combination, in inhibiting the crystallization of celecoxib (CEX) from amorphous solid dispersions (ASDs) exposed to different temperatures and relative humidities was evaluated. It was found that polyvinylpyrrolidone (PVP) and PVP-vinyl acetate formed stronger or more extensive hydrogen bonding with CEX than cellulose-based polymers. This, combined with their better effectiveness in raising the glass transition temperature (T_g) of the dispersions, provided better physical stabilization of amorphous CEX against crystallization in the absence of moisture when compared with dispersions formed with cellulose derivatives. In ternary dispersions containing 2 polymers, the physical stability was minimally impaired by the presence of a cellulose-based polymer when the major polymer present was PVP. On exposure to moisture, stability of the CEX ASDs was strongly affected by both the dispersion hygroscopicity and the strength of the intermolecular interactions. Binary and ternary ASDs containing PVP appeared to undergo partial amorphous–amorphous phase separation when exposed 94% relative humidity, followed by crystallization, whereas other binary ASDs crystallized directly without amorphous–amorphous phase separation.     

Physicochemical Characterization of Hot Melt Extruded Bicalutamide–Polyvinylpyrrolidone Solid Dispersions

Solid molecular dispersions of bicalutamide (BL) and polyvinylpyrrolidone (PVP) were prepared by hot melt extrusion technology at drug‐to‐polymer ratios of 1:10, 2:10, and 3:10 (w/w). The solid‐state properties of BL, physical mixtures of BL/PVP, and hot melt extrudates were characterized using differential scanning calorimetry (DSC), powder X‐ray diffractometry (PXRD), Raman, and Fourier transform infrared (FTIR) spectroscopy. Drug dissolution studies were subsequently conducted on hot melt extruded solid dispersions and physical mixtures. All hot melt extrudates had a single T_g between the T_g of amorphous BL and PVP indicating miscibility of BL with PVP and the formation of solid molecular dispersions. PXRD confirmed the presence of the amorphous form of BL within the extrudates. Conversely, PXRD patterns recorded for physical mixtures showed sharp bands characteristic of crystalline BL, whereas DSC traces had a distinct endotherm at 196°C corresponding to melting of crystalline BL. Further investigations using DSC confirmed solid‐state plasticization of PVP by amorphous BL and hence antiplasticization of amorphous BL by PVP. Experimentally observed T_g values of physical mixtures were shown to be significantly higher than those calculated using the Gordon–Taylor equation suggesting the formation of strong intermolecular interactions between BL and PVP. FTIR and Raman spectroscopy were used to investigate these interactions and strongly suggested the presence of secondary interaction between PVP and BL within the hot melt extrudates. The drug dissolution properties of hot melt extrudates were enhanced significantly in comparison to crystalline BL and physical mixtures. Moreover, the rate and extent of BL release were highly dependent on the amount of PVP present within the extrudate. Storage of the extrudates confirmed the stability of amorphous BL for up to 12 months at 20°C, 40% RH whereas stability was reduced under highly humid conditions (20°C, 65% RH). Interestingly, BL recrystallization after storage under these conditions had no effect on the dissolution properties of the extrudates. © 2009 Wiley‐Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 1322–1335, 2010     

Effect of temperature and moisture on the miscibility of amorphous dispersions of felodipine and poly(vinyl pyrrolidone)

The physical stability of amorphous molecular level solid dispersions will be influenced by the miscibility of the components. The goal of this work was to understand the effects of temperature and relative humidity on the miscibility of a model amorphous solid dispersion. Infrared spectroscopy was used to evaluate drug–polymer hydrogen bonding interactions in amorphous solid dispersions of felodipine and poly(vinyl pyrrolidone) (PVP). Samples were analyzed under stressed conditions: high temperature and high relative humidity. The glass transition temperature (T_g) of select systems was studied using differential scanning calorimetry (DSC). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) were used to further investigate moisture-induced changes in solid dispersions. Felodipine-PVP solid dispersions showed evidence of adhesive hydrogen bonding interactions at all compositions studied. The drug–polymer intermolecular interactions were weakened and/or less numerous on increasing the temperature, but persisted up to the melting temperature of the drug. Changes in the hydrogen bonding interactions were found to be reversible with changes in temperature. In contrast, the introduction of water into amorphous molecular level solid dispersions at room temperature irreversibly disrupted interactions between the drug and the polymer resulting in amorphous-amorphous phase separation followed by crystallization. DSC, AFM, and TEM results provided further evidence for the occurrence of moisture induced immiscibility. In conclusion, it appears that felodipine-PVP solid dispersions are susceptible to moisture-induced immiscibility when stored at a relative humidity ≥75%. In contrast, the solid dispersions remained miscible on heating. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99:169–185, 2010     

Preparation of a solid dispersion of felodipine using a solvent wetting method.

A straightforward solvent wetting method was used to prepare felodipine solid dispersions in the presence of various carriers. Dichloromethane is not needed when HPMC solid dispersions were produced using the solvent wetting method. The amount of ethanol used to prepare solid dispersions did not have a significant effect on the dissolution rate of felodipine. The results of X-ray diffraction and thermal analysis indicated that the drug was in the amorphous state when PVP, HPMC, and poloxamer were used as carriers. The dissolution rates of felodipine in PVP, HPMC, or poloxamer solid dispersions were much faster than those for the corresponding physical mixtures. However, dissolution profiles were found to depend on the carrier used; the dissolution rate of felodipine increased slowly for solid dispersions prepared using HPMC, whereas rapid initial dissolution rates were observed for solid dispersions prepared using PVP or poloxamer. Increases in dissolution rates were partly dependent on the ratios of felodipine to carrier. No significant changes in crystal form were observed by X-ray diffraction or thermal analysis, and no significant changes in dissolution rate were observed when sorbitol and mannitol were used as carriers.     

Miscibility/stability considerations in binary solid dispersion systems composed of functional excipients towards the design of multi-component amorphous systems

The correlations between amorphous miscibility/physical stability of binary solid dispersions (a highly crystalline additive—an amorphous polymer) and the physicochemical properties of the components were investigated. Crystalline functional excipients including surfactants, organic acids, and organic bases were prepared in binary solid dispersions in amorphous polymers by solvent evaporation method. Amorphous miscibility and physical stability of the systems were characterized using polarized light microscope, differential scanning calorimeter, and powder X-ray diffraction. Physicochemical parameters (solubility parameter (δ), hydrogen bond energy, Log P, pK_a value as an indicator of acid-base ionic interaction, and T_g of the dispersion as a surrogate of system's mobility) were selected as thermodynamic and kinetic factors to examine their influences on the systems' amorphous miscibility and physical stability. All systems possessing acid-base ionic interaction formed amorphous state. In the absence of the ionic interaction, solubility parameter and partition coefficient were shown to have major roles on amorphous formation. Upon storage condition at 25°C/60% RH for 50 days, systems having ionic interaction and high T_g remained in the amorphous state. This binary system study provides an insight and a basis for formation of the amorphous state of multi-component solid dispersions utilizing their physicochemical properties. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:4711–4723, 2009     

Moisture Sorption by Polymeric Excipients Commonly Used in Amorphous Solid Dispersions and its Effect on Glass Transition Temperature: II. Cellulosic Polymers

Moisture sorption by polymeric carriers used for the development of amorphous solid dispersions (ASDs) plays a critical role in the physical stability of dispersed drugs since moisture may decrease glass transition temperature (T_g) and thereby increase molecular mobility of drugs leading to their crystallization. To assist the selection of appropriate polymers for ASDs, we conducted moisture sorption by five types of cellulosic polymers, namely, hydroxypropyl cellulose (HPC), hydroxypropyl methyl cellulose (HPMC), hydroxypropyl methyl cellulose acetate succinate (HPMCAS), hydroxypropyl methyl cellulose phthalate (HPMCP), and ethyl cellulose (EC), as functions of relative humidity (10 to 90% RH) and temperature (25 and 40 °C). The moisture sorption was in the order of HPC>HPMC>HPMCP>HPMCAS>EC, and there was no significant effect of the molecular weights of polymers on moisture uptake. There was also less moisture sorption at 40 °C than that at 25 °C. Glass transition temperatures (T_g) of the polymers decreased with the increase in moisture content. However, the plasticizing effect by moisture on HPC could not be determined fully since, despite being amorphous, there were very little baseline shifts in DSC scans. There was also very shallow baseline shift for HPMC at >1% moisture content. In contrast, T_g of HPMCAS and HPMCP decreased in general agreement with the Gordon-Taylor/Kelley-Bueche equation, and EC was semicrystalline having both T_g and melting endotherm, with only minor effect of moisture on T_g. The results of the present investigation would lead to a systematic selection of polymeric carriers for ASDs.     

A Comparison of the Physical Stability of Amorphous Felodipine and Nifedipine Systems

Purpose The objective of this study was to investigate thermodynamic and kinetic factors contributing to differences in the isothermal nucleation rates of two structurally related calcium channel blockers, nifedipine and felodipine, both alone and in the presence of poly(vinylpyrrolidone) (PVP).Materials and Methods Thin films of amorphous systems were cast onto glass slides and the nucleation rate was determined using optical microscopy. Enthalpy, entropy, and free energy of crystallization of the pure compounds were measured using differential scanning calorimetery (DSC). Molecular mobility and glass transition temperature of each amorphous system were characterized using DSC and hydrogen bonding patterns were analyzed with infrared spectroscopy. The composition dependence of the thermodynamic activity of the amorphous drug in the presence of the polymer was estimated using Flory‐Huggins lattice theory.Results Nifedipine crystallized more readily than felodipine from the metastable amorphous form both alone and in the presence of PVP despite having a similar glass transition temperature and molecular mobility. Nifedipine was found to have a larger enthalpic driving force for crystallization and a lower activation energy for nucleation.Conclusions The properties of the metastable form alone did not explain the greater propensity for nifedipine crystallization. When considering the physical stability of amorphous systems, it is important to also consider the properties of the crystalline counterpart.     

Influence of different polymers on the crystallization tendency of molecularly dispersed amorphous felodipine

The ability of various polymers to inhibit the crystallization of amorphous felodipine was studied in amorphous molecular dispersions. Spin-coated films of felodipine with poly(vinylpyrrolidone) (PVP), hydroxypropylmethylcellulose acetate succinate (HPMCAS), and hydroxypropylmethylcellulose (HPMC) were prepared and used for measurement of the nucleation rate and to probe drug-polymer intermolecular interactions. Bulk solid dispersions were prepared by a solvent evaporation method and characterized using thermal analysis. It was found that each polymer was able to significantly decrease the nucleation rate of amorphous felodipine even at low concentrations (3-25% w/w). Each polymer was found to affect the nucleation rate to a similar extent at an equivalent weight fraction. For HPMC and HPMCAS, thermal analysis indicated that the glass transition temperature (T(g)) of the solid dispersions were not significantly different from that of felodipine alone, whereas an increase in T(g) was observed for the PVP containing solid dispersions. Infrared spectroscopic studies indicated that hydrogen bonding interactions were formed between felodipine and each of the polymers. These interactions were stronger between felodipine and PVP than for the other polymers. It was speculated that, at the concentrations employed, the polymers reduce the nucleation rate through increasing the kinetic barrier to nucleation.     

Effect of Polymer Content and Molecular Weight on the Morphology and Heat- and Moisture-Induced Transformations of Spray-Dried Composite Particles of Amorphous Lactose and Poly(vinylpyrrolidone)

Purpose. The aim was to investigate the influence of polymer content and molecular weight on the morphology and heat- and moisture-induced transformations, as indicators of stability, of spray-dried composite particles of amorphous lactose and poly(vinylpyrrolidone) (PVP). Methods. Amorphous lactose and composite particles of amorphous lactose with different contents and molecular weights of PVP were prepared by spray drying. The nanostructure of the particles was analyzed by x-ray powder diffractometry, the morphology by light microscopy and SEM, the glass transition temperatures (T_g), crystallization temperatures (T_c), heats of crystallization and melting temperatures by differential scanning calorimetry, and moisture-induced crystallizations gravimetrically and by microcalorimetry. Results. All the types of particles prepared were amorphous. The T_g was unchanged or only marginally increased as a result of the inclusion of PVP. However, crystallization temperature, time to moisture-induced crystallization, and particle morphology were affected by both content and molecular weight of PVP. Conclusions. Increased content and molecular weight of PVP may have the potential to increase the physical stability of amorphous lactose. However, T_g seems not to be a relevant indicator for the stability of this type of amorphous composite materials.     

Characterization and stability of solid dispersions based on PEG/polymer blends

Solid dispersions were prepared by a melting method from the water-insoluble model drugs carbamazepine and nifedipine and polyethylene glycol 1500 (PEG 1500) or 1:1 mixtures of PEG 1500 and the polymers polyvinylpyrrolidone (PVP 30, PVP 12), polyvinylpyrrolidone-co-vinylacetate (PVPVA) and Eudragit EPO (Eudragit) in order to combine advantages of the different carrier polymers (recrystallization inhibition, processability and stability). The solid dispersions were characterized by dissolution, powder X-ray diffractometry and microscopy directly after preparation and after storage for 3 and 6 months at 25 °C/0% relative humidity (RH) or 3 months at 40 °C/75% RH. More than 80% drugs were released from all solid dispersions within 20 min. The dissolution rate of carbamazepine decreased in the order of PEG 1500 > PEG 1500/Eudragit > PEG 1500/PVP 30 > PEG 1500/PVPVA > PEG 1500/PVP 12. The dissolution rank order was not directly correlated to the amorphous/crystalline state of the drugs, but rather to the properties of the PEG 1500/polymer compositions. Nifedipine was released in the order of PEG 1500 > PEG 1500/PVPVA > PEG 1500/PVP 30 > PEG 1500/PVP 12 > PEG 1500/Eudragit. Amorphous nifedipine was present in all PEG 1500/polymer dispersions except in pure PEG 1500 solid dispersion. The significant increase in dissolution rate of PEG 1500 solid dispersions was due to the reduced crystallinity of the drug and the excellent solubilisation properties of PEG 1500. After 6 months storage at 25 °C/0% RH, the solid dispersions released both drugs in the order PEG 1500/PVPVA > PEG 1500/PVP 30 > PEG 1500/PVP 12 > PEG 1500/Eudragit > PEG 1500. The stabilized amorphous state of the drug resulted in stable dissolution profiles of PEG 1500/PVPVA, PEG 1500/PVP 30 and PEG 1500/PVP 12 when compared to the PEG 1500 solid dispersions, which contained a higher amount of crystalline drug. The solid dispersions with PEG 1500/PVPVA or PEG 1500/PVP stored for 3 months at 40 °C/75% RH showed phase separation due to the hygroscopic properties of the polymers. The influence of 10% (w/w) of the solubilisers polyoxyl 40 hydrogenated castor oil (Cremophor), macrogol-15-hydroxystearate (Solutol) and fatty alcohol alkoxylate (Pluronic) on the dissolution rate and the physical state of the drug was significant.     

Evaluation of the Physical Stability of Freeze-Dried Sucrose-Containing Formulations by Differential Scanning Calorimetry

Freeze-dried samples of sucrose with buffer salts, amino acids, or dextran have been analyzed with differential scanning calorimetry (DSC) to evaluate the use of DSC thermograms in predicting the physical storage stability. The glass transition temperature, T _g, of the amorphous cake, crystallization, and melting of sucrose are observed with DSC. T _g appeared to be an important characteristic of the physical stability of the amorphous freeze-dried cake. A storage temperature above T _g results in collapse or shrinkage of the cake, which for a sucrose-based formulation, may be accompanied by crystallization of the sucrose. The T _g of the amorphous sucrose is influenced by other components present in the cake. Dextran-40 raised T _g, while the addition of glycine to the formulation lowered T _g. The residual moisture content strongly influences T _g, since water acts as a plasticizer of the system; the higher the moisture content, the lower the T _g and the less physically stable the freeze-dried cake. Crystallization of amorphous sucrose is shown to be inhibited by high molecular weight components or ionic compounds. DSC analysis of freeze-dried cakes proved to be a powerful tool in formulation studies.     

Moisture-Induced Amorphous Phase Separation of Amorphous Solid Dispersions: Molecular Mechanism,Microstructure, and Its Impact on Dissolution Performance

Amorphous phase separation (APS) is commonly observed in amorphous solid dispersions (ASD) when exposed to moisture. The objective of this study was to investigate: (1) the phase behavior of amorphous solid dispersions composed of a poorly water-soluble drug with extremely low crystallization propensity, BMS-817399, and PVP, following exposure to different relative humidity (RH), and (2) the impact of phase separation on the intrinsic dissolution rate of amorphous solid dispersion. Drug-polymer interaction was confirmed in ASDs at different drug loading using infrared (IR) spectroscopy and water vapor sorption analysis. It was found that the drug-polymer interaction could persist at low RH (≤75% RH) but was disrupted after exposure to high RH, with the advent of phase separation. Surface morphology and composition of 40/60 ASD at micro-/nano-scale before and after exposure to 95% RH were also compared. It was found that hydrophobic drug enriched on the surface of ASD after APS. However, for the 40/60 ASD system, the intrinsic dissolution rate of amorphous drug was hardly affected by the phase behavior of ASD, which may be partially attributed to the low crystallization tendency of amorphous BMS-817399 and enriched drug amount on the surface of ASD. Intrinsic dissolution rate of PVP decreased resulting from APS, leading to a lower concentration in the dissolution medium, but supersaturation maintenance was not anticipated to be altered after phase separation due to the limited ability of PVP to inhibit drug precipitation and prolong the supersaturation of drug in solution. This study indicated that for compounds with low crystallization propensity and high hydrophobicity, the risk of moisture-induced APS is high but such phase separation may not have profound impact on the drug dissolution performance of ASDs. Therefore, application of ASD technology on slow crystallizers could incur low risks not only in physical stability but also in dissolution performance.     

Molecular Mobility in Mixtures of Absorbed Water and Solid Poly(vinylpyrrolidone)

Poly(vinylpyrrolidone) (PVP) was used as model system to examine molecular mobility in mixtures of absorbed water with solid amorphous polymers. Water vapor absorption isotherms were determined, along with diffusion and proton NMR relaxation measurements of absorbed water. Concurrently, measurements of glass transition temperatures (T _g) and carbon-13 NMR relaxation times for PVP were determined as a function of water content. Two water contents were used as reference points: W _m, obtained from the fit of water absorption isotherms to the BET equation, corresponding to the first shoulder in the sigmoid isotherm; and W _g, the amount of water necessary to depress T _g to the isotherm temperature. Translational diffusion coefficients of water, along with proton T ₁ relaxation time constants, show that both the translational and the rotational mobility of the water is hindered by the presence of the solid polymer and that the absorbed water is most likely represented by two or more populations of water with different modes or time scales of motion. The presence of "tightly bound or immobilized water at levels corresponding to W _m, however, is unlikely, since water molecules maintain a high degree of mobility, even at the lowest levels of water. Above W _g, water shows an increase in mobility with increasing water content, but it is always less mobile than bulk water. With increasing water content, carbon-13 T ₁ relaxation time constants for PVP, measured under the same conditions as above, indicate a major increase in the molecular mobility of carbon atoms associated with the pyrrolidone side chains.     

Spray-Dried Amorphous Solid Dispersions of Simvastatin,a Low T<Subscript>g</Subscript> Drug: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">in Vivo</Emphasis> Evaluations

Purpose To obtain free flowing, stable, amorphous solid dispersions (SDs) of simvastatin (SIM), a drug with relatively lower glass transition temperature (T_g) by spray drying technique, and to perform comparative in vivo study in rats, which could justify the improvement in rate and extent of in vitro drug release.Methods Dichloromethane suspensions of SIM either alone or in combination with PVP (1:1 or 1:2 parts by weight) were spray dried with proposed quantity of Aerosil 200 (1:1, 1:1:1, 1:2:2 parts by weight of SIM, Aerosil 200 and PVP, respectively). SDs were characterized initially in comparison with pure drug and corresponding physical mixtures in same ratios by drug content, saturation solubility, SEM, DSC, XRPD, IR, and in vitro drug release. SD 1:2:2 was further subjected to accelerated stability testing and checked for in vitro drug release and presence of crystallinity using DSC and XRPD. In addition, improvement in rate and extent of in vitro drug release from SD 1:2:2 was justified by in vivo study in rats.Results Combination of SD and surface adsorption techniques has been attempted to overcome the limitations of spray drying technique for amorphization of low T_g drugs. Based on powder characteristics, drug content, saturation solubility, and feasibility of processing into tablets; SD 1:2:2 was selected as the optimized formulation. During initial characterization, SEM, DSC, and XRPD analyses confirmed the presence of amorphous form in SD 1:2:2. IR spectroscopy revealed possibility of hydrogen bonding interaction between SIM and PVP in SDs. Also, there was dramatical improvement in rate and extent of in vitro drug release of SD 1:2:2. Insignificant decrease in dissolution was observed with no evidence of crystallinity during accelerated stability studies of SD 1:2:2. Moreover in vivo study in rats also justified the improvement in therapeutic efficacy of SD 1:2:2 over pure SIM.Conclusions Thus, present study demonstrates high potential of spray drying technique for obtaining stable amorphous SDs of low T_g drugs.     

The Effects of Absorbed Water on the Properties of Amorphous Mixtures Containing Sucrose

Purpose. To measure the water vapor absorption behavior of sucrose-poly(vinyl pyrrolidone) (PVP) and sucrose-poly(vinyl pyrrolidone co-vinyl acetate) (PVP/VA) mixtures, prepared as amorphous solid solutions and as physical mixtures, and the effect of absorbed water on the amorphous properties, i.e., crystallization and glass transition temperature, T_g, of these systems. Methods. Mixtures of sucrose and polymer were prepared by co-lyophilization of aqueous sucrose-polymer solutions and by physically mixing amorphous sucrose and polymer. Absorption isotherms for the individual components and their mixtures were determined gravimetrically at 30°C as a function of relative humidity. Following the absorption experiments, mixtures were analyzed for evidence of crystallization using X-ray powder diffraction. For co-lyophilized mixtures showing no evidence of crystalline sucrose, T_g was determined as a function of water content using differential scanning calorimetry. Results. The absorption of water vapor was the same for co-lyophilized and physically mixed samples under the same conditions and equal to the weighted sums of the individual isotherms where no sucrose crystallization was observed. The crystallization of sucrose in the mixtures was reduced relative to sucrose alone only when sucrose was molecularly dispersed (co-lyophilized) with the polymers. In particular, when co-lyophilized with sucrose at a concentration of 50%, PVP was able to maintain sucrose in the amorphous state for up to three months, even when the T_g was reduced well below the storage temperature by the absorbed water. Conclusions. The water vapor absorption isotherms for co-lyophilized and physically mixed amorphous sucrose-PVP and sucrose-PVP/VA mixtures at 30°C are similar despite interactions between sugar and polymer which are formed when the components are molecularly dispersed with one another. In the presence of absorbed water the crystallization of sucrose was reduced only by the formation of a solid-solution, with PVP having a much more pronounced effect than PVP/VA. The effectiveness of PVP in preventing sucrose crystallization when significant levels of absorbed water are present was attributed to the molecular interactions between sucrose, PVP and water.     

Influence of Glass Forming Ability on the Physical Stability of Supersaturated Amorphous Solid Dispersions

In this study, the influence of the glass-forming ability (GFA) of a drug on its physical stability in a supersaturated solid dispersion was investigated. Nine drugs were classified according to their GFA using their respective critical cooling rate. Their respective solubility in poly(vinylpyrrolidone-co-vinyl acetate) 6:4 (PVPVA64) was predicted using the melting point depression method based on the Flory-Huggins lattice theory. Supersaturated amorphous solid dispersions at a level of 25% w/w drug above saturation solubility in the polymer were prepared by film-casting, and their respective physical stability at temperatures of 10°C or 20°C above or below their respective T_g (dry conditions) was monitored by the use of polarized light microscopy. This study showed that drugs with good GFA (class 3) on average have higher physical stability in supersaturated amorphous solid dispersion compared to drug with modest GFA (class 2), which in turn have higher physical stability in supersaturated amorphous solid dispersion than drugs with poor GFA (class 1). These results indicate that the GFA of a drug and its physical stability in a supersaturated amorphous solid dispersion stored at a temperature above or below its T_g are correlated.     

Molecular mobility-based estimation of the crystallization rates of amorphous nifedipine and phenobarbital in poly(vinylpyrrolidone) solid dispersions

The overall crystallization rates and mean relaxation times of amorphous nifedipine and phenobarbital in the presence of poly(vinylpyrrolidone) (PVP) were determined at various temperatures to gain further insight into the effect of molecular mobility on the crystallization rates of amorphous drugs and the possibility of predicting stability from their molecular mobility. Nifedipine-PVP (9:1 w/w) and phenobarbital-PVP (95:5 w/w) solid dispersions were prepared by melting and rapidly cooling mixtures of each drug and PVP. The amount of amorphous nifedipine remaining in the solid dispersion was calculated from the heat of crystallization,which was obtained by differential scanning calorimetry. The amount of amorphous phenobarbital remaining in the solid dispersion was estimated from the change in the heat capacity at its glass transition temperature (T(g)). The time required for the amount of amorphous drug remaining to fall to 90% (t(90)) was calculated from the profile of time versus the amount of amorphous drug remaining. The t(90) values for the solid dispersions studied were 100-1000 times longer than those of pure amorphous drugs when compared at the same temperature. Enthalpy relaxation of the amorphous drugs in the solid dispersions was reduced compared with that in the pure amorphous drugs, indicating that the molecular mobility of the amorphous drugs is reduced in the presence of PVP. The temperature dependence of mean relaxation time (tau) for the nifedipine-PVP solid dispersion was calculated using the Adam-Gibbs-Vogel equation. Parameters D and T(0) in this equation were estimated from the heating rate dependence of T(g). Similar temperature dependence was observed for t(90) and tau values of the solid dispersion, indicating that the information on the temperature dependence of the molecular mobility, along with the crystallization data obtained at around the T(g), are useful for estimating the t(90) of overall crystallization at temperatures below T(g) in the presence of excipients.     

Effect of polymer type on the dissolution profile of amorphous solid dispersions containing felodipine

Amorphous solid dispersions are used as a strategy to improve the bioavailability of poorly water-soluble compounds. When formulating with a polymer, it is important not only for the polymer to stabilize against crystallization in the solid state, but also to improve the dissolution profile through inhibiting crystallization from the supersaturated solution generated by dissolution of the amorphous material. In this study, the dissolution profiles of solid dispersions of felodipine formulated with poly(vinylpyrrolidone) (PVP), hydroxypropyl methylcellulose (HPMC) or hydroxypropyl methylcellulose acetate succinate (HPMCAS) were compared. In addition, concentration versus time profiles were evaluated for the supersaturated solutions of felodipine in the presence and absence of the polymers. HPMCAS was found to maintain the highest level of supersaturation for the greatest length of time for both the dissolution and solution crystallization experiments, whereas PVP was found to be the least effective crystallization inhibitor. All polymers appeared to reduce the crystal growth rates of felodipine at an equivalent supersaturation and this mechanism most likely contributes to the enhanced solution concentration values observed during dissolution of the amorphous solid dispersions.     

Phase Behavior of Amorphous Molecular Dispersions II: Role of Hydrogen Bonding in Solid Solubility and Phase Separation Kinetics

No HeadingPurpose. To determine the factors influencing solid solubility and phase separation kinetics of drugs from amorphous solid dispersions.Methods. Solid dispersions of griseofulvin-poly(vinyl pyrrolidone) (PVP) and indoprofen-PVP were prepared using solvent evaporation technique. Dispersions demonstrating single T_g were exposed to 40°C/69% RH for 90 days. Drug solid solubility in the polymer and phase separation rates were determined from changes in T_g of solid dispersions. FTIR spectroscopy and XRD were used to characterize drug-polymer interactions and drug crystallinity, respectively.Results. Freshly prepared solid dispersion of up to 30% w/w griseofulvin and indoprofen were molecularly miscible with PVP. Hydrogen bonding was evident in indoprofen-PVP, but not in griseofulvin-PVP dispersions. When exposed to 40°C/69% RH, griseofulvin phase separated completely, whereas the solid solubility of indoprofen was determined as 13% w/w. The first-order rate constants of phase separation for 10%. 20%, and 30% w/w griseofulvin dispersions were estimated as 4.66, 5.19, and 12.50 (×10²) [day^–1], and those of 20% and 30% w/w indoprofen were 0.62 and 1.25 (×10²) [day^–1], respectively.Conclusions. Solid solubility of griseofulvin and indoprofen in PVP is 0% w/w and 13% w/w, respectively. Drug-polymer hydrogen bonding in indoprofen-PVP dispersions favors solid solubility. Phase separation rate of drug from the solid dispersions depends on the initial drug content and the nature of drug-polymer interactions.