Lattice-Matched AlInN/GaN/AlGaN/GaN Heterostructured-Double-Channel Metal-Oxide-Semiconductor High-Electron Mobility Transistors with Multiple-Mesa-Fin-Channel Array

Multiple-mesa-fin-channel array patterned by a laser interference photolithography system and gallium oxide (Ga₂O₃) gate oxide layer deposited by a vapor cooling condensation system were employed in double-channel Al_0.83In_0.17N/GaN/Al_0.18Ga_0.82N/GaN heterostructured-metal-oxide-semiconductors (MOSHEMTs). The double-channel was constructed by the polarized Al_0.18Ga_0.82N/GaN channel 1 and band discontinued lattice-matched Al_0.83In_0.17N/GaN channel 2. Because of the superior gate control capability, the generally induced double-hump transconductance characteristics of double-channel MOSHEMTs were not obtained in the devices. The superior gate control capability was contributed by the side-wall electrical field modulation in the fin-channel. Owing to the high-insulating Ga₂O₃ gate oxide layer and the high-quality interface between the Ga₂O₃ and GaN layers, low noise power density of 8.7 × 10⁻¹⁴ Hz⁻¹ and low Hooge’s coefficient of 6.25 × 10⁻⁶ of flicker noise were obtained. Furthermore, the devices had a unit gain cutoff frequency of 6.5 GHz and a maximal oscillation frequency of 12.6 GHz.     

The Effect of Gate Work Function and Electrode Gap on Wide Band-Gap Sn-Doped α-Ga2O3 Metal–Semiconductor Field-Effect Transistors

We present technology computer aided design (TCAD) results for wide band-gap Sn-doped α-Ga₂O₃ metal–semiconductor field-effect transistors (MESFETs). In particular, the effect of gate work function and electrode gap length on the electrical characteristics is demonstrated for a thorough understanding of the behavior of such devices. The gate work function significantly affects the reverse bias drain current under the gate-current dominant regime, whereas a gate-source/drain gap larger than 0.1 µm has a negligible effect on the drain current.     

Template-Mediated Synthesis of Hierarchically Porous Metal–Organic Frameworks for Efficient CO2/N2 Separation

Carbon dioxide (CO₂) is generally unavoidable during the production of fuel gases such as hydrogen (H₂) from steam reformation and syngas composed of carbon monoxide (CO) and hydrogen (H₂). Efficient separation of CO₂ from these gases is highly important to improve the energetic utilization efficiency and prevent poisoning during specific applications. Metal–organic frameworks (MOFs), featuring ordered porous frameworks, high surface areas and tunable pore structures, are emerging porous materials utilized as solid adsorbents for efficient CO₂ capture and separation. Furthermore, the construction of hierarchical MOFs with micropores and mesopores could further promote the dynamic separation processes, accelerating the diffusion of gas flow and exposing more adsorptive pore surface. Herein, we report a simple, efficient, one-pot template-mediated strategy to fabricate a hierarchically porous CuBTC (CuBTC-Water, BTC = 1,3,5-benzenetricarboxylate) for CO₂ separation, which demonstrates abundant mesopores and the superb dynamic separation ability of CO₂/N₂. Therefore, CuBTC-Water demonstrated a CO₂ uptake of 180.529 cm³ g⁻¹ at 273 K and 1 bar, and 94.147 cm³ g⁻¹ at 298 K and 1 bar, with selectivity for CO₂/N₂ mixtures as high as 56.547 at 273 K, much higher than microporous CuBTC. This work opens up a novel avenue to facilely fabricate hierarchically porous MOFs through one-pot synthesis for efficient dynamic CO₂ separation.     

Study of Construction and Performance on Photoelectric Devices of Cs–Pb–Br Perovskite Quantum Dot

White LEDs were encapsulated using Cs₄PbBr₆ quantum dots and Gd₂O₃:Eu red phosphor as lamp powder. Under the excitation of a GaN chip, the color coordinates of the W-LED were (0.33, 0.34), and the color temperature was 5752 K, which is close to the color coordinate and color temperature range of standard sunlight. The electric current stability was excellent with an increase in the electric current, voltage, and luminescence intensity of the quantum dots and phosphors by more than 10 times. However, the stability of the quantum dots was slightly insufficient over long working periods. The photocatalytic devices were constructed using TiO₂, CsPbBr₃, and NiO as an electron transport layer, light absorption layer, and catalyst, respectively. The Cs–Pb–Br-based perovskite quantum dot photocatalytic devices were constructed using a two-step spin coating method, one-step spin coating method, and full PLD technology. In order to improve the water stability of the device, a hydrophobic carbon paste and carbon film were selected as the hole transport layer. The TiO₂ layer and perovskite layer with different thicknesses and film forming qualities were obtained by changing the spin coating speed. The influence of the spin coating speed on the device’s performance was explored through SEM and a J–V curve to find the best spin coating process. The device constructed by the two-step spin coating method had a higher current density but no obvious increase in the current density under light, while the other two methods could obtain a more obvious light response, but the current density was very low.     

The Reaction Products of the Al–Nb–B2O3–CuO System in an Al 6063 Alloy Melt and Their Influence on the Alloy’s Structure and Characteristics

To meet aero-engine aluminum skirt requirements, an experiment was carried out using Al–Nb–B₂O₃–CuO as the reaction system and a 6063 aluminum alloy melt as the reaction medium for a contact reaction, and 6063 aluminum matrix composites containing in situ particles were prepared with the near-liquid-phase line-casting method after the reaction was completed. The effects of the reactant molar ratio and the preheating temperature on the in situ reaction process and products were explored in order to determine the influence of in situ-reaction-product features on the organization and the qualities of the composites. Thermodynamic calculations, DSC analysis, and experiments revealed that the reaction could continue when the molar ratio of the reactants of Al–Nb–B₂O₃–CuO was 6:1:1:1.5. A kinetic study revealed that the Al thermal reaction in the system produced Al₂O₃ and [B], and the [B] atoms interacted with Nb to generate NbB₂. With increasing temperature, the interaction between the Nb and the AlB₂ produced hexagonal NbB₂ particles with an average longitudinal size of 1 μm and subspherical Al₂O₃ particles with an average longitudinal size of 0.2 μm. The microstructure of the composites was reasonably fine, with an estimated equiaxed crystal size of around 22 μm, a tensile strength of 170 MPa, a yield strength of 135 MPa, an elongation of 13.4%, and a fracture energy of 17.05 × 10⁵ KJ/m³, with a content of 2.3 wt% complex-phase particles. When compared to the matrix alloy without addition, the NbB₂ and Al₂O₃ particles produced by the in situ reaction had a significant refinement effect on the microstructure of the alloy, and the plasticity of the composite in the as-cast state was improved while maintaining higher strength and better overall mechanical properties, allowing for industrial mass production.     

Study on Crystallization Process of Li2O–Al2O3–SiO2 Glass-Ceramics Based on In Situ Analysis

In this paper, we used differential scanning calorimetry (DSC), high-temperature X-ray diffraction (HT-XRD), and confocal scanning laser microscopy (CSLM) to investigate the Li₂O–Al₂O_3–SiO₂ glass crystallization process. At 943 K, lithium disilicate (Li₂Si₂O₅) phase crystals began to precipitate in the Li₂O–Al₂O₃–SiO₂ glass with a crystal size of 50–70 nm. At the temperature of 1009 K, petalite (LiAlSi₄O₁₀) crystals began to precipitate in the vitreous phase, forming composite spherical crystals of LiAlSi₄O₁₀ and Li₂Si₂O₅ with size in the range of 90–130 nm. Furthermore, the Kissinger method and KAS method of the JMAK model were used to calculate the crystallization activation energy and the Avrami index “n”. It was found that the precipitation mechanism of the two kinds of crystals is whole crystallization; accordingly, the selection of crystallization heat treatment system was guided to determine the nucleation and crystallization temperature.     

Performance Enhancement in N2 Plasma Modified AlGaN/AlN/GaN MOS-HEMT Using HfAlOX Gate Dielectric with Γ-Shaped Gate Engineering

In this paper, we have demonstrated the optimized device performance in the Γ-shaped gate AlGaN/AlN/GaN metal oxide semiconductor high electron mobility transistor (MOS-HEMT) by incorporating aluminum into atomic layer deposited (ALD) HfO₂ and comparing it with the commonly used HfO₂ gate dielectric with the N₂ surface plasma treatment. The inclusion of Al in the HfO₂ increased the crystalline temperature (~1000 °C) of hafnium aluminate (HfAlO_X) and kept the material in the amorphous stage even at very high annealing temperature (>800 °C), which subsequently improved the device performance. The gate leakage current (I_G) was significantly reduced with the increasing post deposition annealing (PDA) temperature from 300 to 600 °C in HfAlO_X-based MOS-HEMT, compared to the HfO₂-based device. In comparison with HfO₂ gate dielectric, the interface state density (D_it) can be reduced significantly using HfAlO_X due to the effective passivation of the dangling bond. The greater band offset of the HfAlO_X than HfO₂ reduces the tunneling current through the gate dielectric at room temperature (RT), which resulted in the lower I_G in Γ-gate HfAlO_X MOS-HEMT. Moreover, I_G was reduced more than one order of magnitude in HfAlO_X MOS-HEMT by the N₂ surface plasma treatment, due to reduction of N₂ vacancies which were created by ICP dry etching. The N₂ plasma treated Γ-shaped gate HfAlO_X-based MOS-HEMT exhibited a decent performance with I_DMAX of 870 mA/mm, G_MMAX of 118 mS/mm, threshold voltage (V_TH) of −3.55 V, higher I_ON/I_OFF ratio of approximately 1.8 × 10⁹, subthreshold slope (SS) of 90 mV/dec, and a high V_BR of 195 V with reduced gate leakage current of 1.3 × 10⁻¹⁰ A/mm.     

Chemical and Structural Characterization of Amorphous and Crystalline Alumina Obtained by Alternative Sol–Gel Preparation Routes

Aluminum oxide is one of the most commonly used materials in the industry. It is used in the field of catalysis, refractories, and optics. Despite the fact that there are many techniques available, there is still a great challenge in obtaining a material with desired and designed properties. Nevertheless, there is a great flexibility in making customized alumina materials with desired physicochemical properties synthesized by sol–gel methods. This work consists in characterizing the physicochemical properties of sol–gel synthesized aluminum oxide using different sol–gel preparation routes. Three different sols were obtained by using organic precursors and underwent thermal treatment. The structure (Middle Infrared Spectroscopy, Diffused Reflectance Infrared Spectroscopy, X-ray Diffraction, Magic Angle Spinning Nuclear Magnetic Resonance) and microstructure (Scanning Electron Microscopy with Electron Dispersive Spectroscopy) tests of the materials were carried out. The specific surface area was determined by using the Brunauer–Emmett–Teller (BET) method. Thermal analysis was performed for all the powders, in order to analyze the specific temperature of materials transformation.     

Characterization of Al2O3 Samples and NiAl–Al2O3 Composite Consolidated by Pulse Plasma Sintering

The paper describes an investigation of Al₂O₃ samples and NiAl–Al₂O₃ composites consolidated by pulse plasma sintering (PPS). In the experiment, several methods were used to determine the properties and microstructure of the raw Al₂O₃ powder, NiAl–Al₂O₃ powder after mechanical alloying, and samples obtained via the PPS. The microstructural investigation of the alumina and composite properties involves scanning electron microscopy (SEM) analysis and X-ray diffraction (XRD). The relative densities were investigated with helium pycnometer and Archimedes method measurements. Microhardness analysis with fracture toughness (K_IC) measures was applied to estimate the mechanical properties of the investigated materials. Using the PPS technique allows the production of bulk Al₂O₃ samples and intermetallic ceramic composites from the NiAl–Al₂O₃ system. To produce by PPS method the NiAl–Al₂O₃ bulk materials initially, the composite powder NiAl–Al₂O₃ was obtained by mechanical alloying. As initial powders, Ni, Al, and Al₂O₃ were used. After the PPS process, the final composite materials consist of two phases: Al₂O₃ located within the NiAl matrix. The intermetallic ceramic composites have relative densities: for composites with 10 wt.% Al₂O₃ 97.9% and samples containing 20 wt.% Al₂O₃ close to 100%. The hardness of both composites is equal to 5.8 GPa. Moreover, after PPS consolidation, NiAl–Al₂O₃ composites were characterized by high plasticity. The presented results are promising for the subsequent study of consolidation composite NiAl–Al₂O₃ powder with various initial contributions of ceramics (Al₂O₃) and a mixture of intermetallic–ceramic composite powders with the addition of ceramics to fabricate composites with complex microstructures and properties. In composites with complex microstructures that belong to the new class of composites, in particular, the synergistic effect of various mechanisms of improving the fracture toughness will be operated.     

Fabrication of TiO2 – KH550 – PEG Super-Hydrophilic Coating on Glass Surface without UV/Plasma Treatment for Self-Cleaning and Anti-Fogging Applications

In this study, we have developed a self-cleaning transparent coating on a glass substrate by dip coating a TiO₂ – KH550 – PEG mixed solution with super-hydrophilicity and good antifogging properties. The fabrication of the thin-film-coated glass is a one-step solution blending method that is performed by depositing only one layer of modified TiO₂ nanoparticles at room temperature. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to determine the structure and morphology of the nanoparticles and the thin-film-coated glass. The surface functional groups were investigated using Fourier-transform infrared spectroscopy (FT-IR), and the optical properties of the glass coating were measured using a UV/Vis spectrometer. The results revealed that the KH-500-modified TiO₂ film coating was in an anatase crystalline form. The hydrophilicity of the coated and uncoated glass substrates was observed by measuring their water contact angle (WCA) using a contact angle instrument. The maximum transparency of the coated glass measured in the visible region (380–780 nm) was approximately 70%, and it possessed excellent super-hydrophilic properties (WCA ~0°) at an annealing temperature of 350 °C without further need of UV or plasma treatment. These results demonstrate the super-hydrophilic coated glass surface has potential for use in self-cleaning and anti-fogging applications.     

Synthesis of Si-Based High-Efficiency and High-Durability Superhydrophilic-Underwater Superoleophobic Membrane of Oil–Water Separation

Oil pollution is caused by the frequent discharge of contaminated industrial wastewater and accidental oil spills and is a severe environmental and health concern. Therefore, efficient materials and processes for effective oil–water separation are being developed. Herein, SiO₂-Na₂SiO₃-coated stainless steel fibers (SSF) with underwater superoleophobic and low-adhesion properties were successfully prepared via a one-step hydrothermal process. The modified surfaces were characterized with scanning electron microscopy (SEM), and contact angle measurements to observe the surface morphology, confirm the successful incorporation of SiO₂, and evaluate the wettability, as well as with X-ray diffraction (XRD). The results revealed that SiO₂ nanoparticles were successfully grown on the stainless-steel fiber surface through the facile hydrothermal synthesis, and the formation of sodium silicate was detected with XRD. The SiO₂-Na₂SiO₃-coated SSF surface exhibited superior underwater superoleophobic properties (153–162°), super-hydrophilicity and high separation efficiency for dichloromethane–water, n-hexane–water, tetrachloromethane–water, paroline–water, and hexadecane–water mixtures. In addition, the as-prepared SiO₂-Na₂SiO₃-coated SSF demonstrated superior wear resistance, long-term stability, and re-usability. We suggest that the improved durability may be due to the presence of sodium silicate that enhanced the membrane strength. The SiO₂-Na₂SiO₃-coated SSF also exhibited desirable corrosion resistance in salty and acidic environments; however, further optimization is needed for their use in basic media. The current study presents a novel approach to fabricate high-performance oil–water separation membranes.     

Reinforced 3D Composite Structures of γ-, α-Al2O3 with Carbon Nanotubes and Reduced GO Ribbons Printed from Boehmite Gels

The ability of boehmite to form printable inks has sparked interest in the manufacturing of 3D alumina (Al₂O₃) and composite structures by enabling direct ink writing methods while avoiding the use of printing additives. These materials may exhibit high porosity due to the printing and sintering procedures, depending on the intended application. The 3D-printed porous composite structures of γ-Al₂O₃ and α-Al₂O₃ containing 2 wt.% of carbon nanotubes or reduced graphene oxide ribbons were fabricated from boehmite gels, followed by different heat treatments. The reinforcing effect of these carbon nanostructures was evidenced by compression tests carried out on the different alumina structures. A maximum relative increase of 50% in compressive strength was achieved for the γ-Al₂O₃ composite structure reinforced with reduced graphene oxide ribbons, which was also accompanied by an increase in the specific surface area.     

Uptake of Radionuclides 60Co, 137Cs,and 90Sr with α-Fe2O3 and Fe3O4 Particles from Aqueous Environment

In the paper, investigation results of the uptake efficiency of radionuclides ⁶⁰Co, ⁹⁰Sr, and ¹³⁷Cs dissolved in water onto iron oxides α-Fe₂O₃ and Fe₃O₄ are presented. It was found that sorption efficiency increased for higher pH values. Independent of the oxide nature, the uptake characteristics are the best toward ⁶⁰Co and the worst toward ¹³⁷Cs, forming the row as follows: ⁶⁰Co > ⁹⁰Sr > ¹³⁷Cs. The highest sorption ability at pH 9 was found for magnetite Fe₃O₄, which was 93%, 73%, and 26% toward ⁶⁰Co, ⁹⁰Sr, and ¹³⁷Cs, respectively, while the respective percentages for hematite α-Fe₂O₃ were 85%, 41%, and 18%. It was assumed that the main sorption mechanism was ion exchange. That may explain some decrease of the sorption efficiency in drinking water due to the interfering presence of magnesium and calcium cations. The obtained results indicated the feasibility of the tested sorbents and their merits, especially in terms of relatively high uptake coefficients, low costs, availability, and lack of toxicity.     

Effective Attenuation of Electromagnetic Waves by Synergetic Effect of α-Fe2O3 and MWCNT/Graphene in LDPE-Based Composites for EMI Applications

In this study, a polymer nanocomposite is synthesized using magnetic and conducting fillers for enhanced electromagnetic interference (EMI) shielding. Alfa-ferrite (α-Fe₂O₃) nanoparticles with minimal multiwalled carbon nanotube (MWCNT) as low as 5 weight % in combination with variable concentrations of graphene nanoplatelets (GNP) are used as fillers in low-density polyethylene (LDPE) polymer matrix. Nanofillers and the polymer matrix are characterized by various techniques such as XRD, SEM, color mapping, EDAX, TGA, etc. The EMI shielding efficiency of the LDPE-based nanocomposites is tested using Vector Network Analyzer (VNA). The results showed that composite with LDPE:MWCNT:GNP:α-FO-50:5:40:5 displayed enhanced EMI shielding (in X-band (8.2–12.4 GHz) compared to other concentrations studied. This is due to the superior ohmic, dielectric, and magnetic losses at this particular composition and to the synergism amongst the filler. An attenuation of 99.99% was achieved for 5% α-Fe₂O₃. The mechanistic aspects of the shielding are discussed using permittivity, conductivity, and attenuation.