Revaprazan-loaded surface-modified solid dispersion: physicochemical characterization and in vivo evaluation

The purpose of this research was to develop a novel revaprazan-loaded surface-modified solid dispersion (SMSD) with improved drug solubility and oral bioavailability. The impact of carriers on aqueous solubility of revaprazan was investigated. HPMC and Cremophor A25 were selected as an appropriate polymer and surfactant, respectively, due to their high drug solubility. Numerous SMSDs were prepared with various concentrations of carriers, using distilled water, and the drug solubility of each was assessed. Moreover, the physicochemical properties, dissolution and pharmacokinetics of selected SMSD in rats were assessed in comparison to revaprazan powder. Of the SMSDs assessed, the SMSD composed of revaprazan/HPMC/Cremophor A25 at the weight ratio of 1:0.28:1.12 had the most enhanced drug solubility (～6000-fold). It was characterized by particles with a relatively rough surface, suggesting that the carriers were attached onto the surface of the unchanged crystalline revaprazan powder. It had a significantly higher dissolution rate, AUC and C_max, and a faster T_max value in comparison to revaprazan powder, with a 5.3-fold improvement in oral bioavailability of revaprazan. Therefore, from an environmental perspective, this SMSD system prepared with water, and without organic solvents, should be recommended as a revaprazan-loaded oral pharmaceutical alternative.     

Soluplus® as an effective absorption enhancer of poorly soluble drugs in vitro and in vivo

As many new active pharmaceutical ingredients are poorly water soluble, solubility enhancers are one possibility to overcome the hurdles of drug dissolution and absorption in oral drug delivery. In the present work a novel solubility enhancing excipient (Soluplus®) was tested for its capability to improve intestinal drug absorption. BCS class II compounds danazol, fenofibrate and itraconazole were tested both in vivo in beagle dogs and in vitro in transport experiments across Caco-2 cell monolayers. Each drug was applied as pure crystalline substance, in a physical mixture with Soluplus®, and as solid solution of the drug in the excipient. In the animal studies a many fold increase in plasma AUC was observed for the solid solutions of drug in Soluplus® compared to the respective pure drug. An effect of Soluplus® in a physical mixture with the drug could be detected for fenofibrate. In vitro transport studies confirm the strong effect of Soluplus® on the absorption behavior of the three tested drugs. Furthermore, the increase of drug flux across Caco-2 monolayer is correlating to the increase in plasma AUC and C_max in vivo. For these poorly soluble substances Soluplus® has a strong potential to improve oral bioavailability. The applicability of Caco-2 monolayers as tool for predicting the in vivo transport behavior of the model drugs in combination with a solubility enhancing excipient was shown. Also the improvement of a solid dispersion compared to physical mixtures of the drugs and the excipient was correctly reflected by Caco-2 experiments. In the case of fenofibrate the possible improvement by a physical mixture was demonstrated, underscoring the value of the used tool as alternative to animal studies.     

Eplerenone nanocrystals engineered by controlled crystallization for enhanced oral bioavailability

Poor aqueous solubility of eplerenone (EPL) is a major obstacle to achieve sufficient bioavailability after oral administration. In this study, we aimed to develop and evaluate eplerenone nanocrystals (EPL-NCs) for solubility and dissolution enhancement. D-optimal combined mixture process using Design-Expert software was employed to generate different combinations for optimization. EPL-NCs were prepared by a bottom-up, controlled crystallization technique during freeze-drying. The optimized EPL-NCs were evaluated for their size, morphology, thermal behavior, crystalline structure, saturation solubility, dissolution profile, in vivo pharmacokinetics, and acute toxicity. The optimized EPL-NCs showed mean particle size of 46.8 nm. Scanning electron microscopy revealed the formation of elongated parallelepiped shaped NCs. DSC and PXRD analysis confirmed the crystalline structure and the absence of any polymorphic transition in EPL-NCs. Furthermore, EPL-NCs demonstrated a 17-fold prompt increase in the saturation solubility of EPL (8.96 vs. 155.85 µg/mL). The dissolution rate was also significantly higher as indicated by ∼95% dissolution from EPL-NCs in 10 min compared to only 29% from EPL powder. EPL-NCs improved the oral bioavailability as indicated by higher AUC, C_max, and lower T_max than EPL powder. Acute oral toxicity study showed that EPL-NCs do not pose any toxicity concern to the blood and vital organs. Consequently, NCs prepared by controlled crystallization technique present a promising strategy to improve solubility profile, dissolution velocity and bioavailability of poorly water-soluble drugs.     

Enhanced solubility and bioavailability of flurbiprofen by cycloamylose

The effect of cycloamylose on the aqueous solubility of flurbiprofen was investigated. To improve the solubility and bioavailability of flurbiprofen (poor water solubility), a solid dispersion was spray dried with a solution of flurbiprofen and cycloamylose at a weight ratio of 1:1. The physicochemical properties of solid dispersions were investigated using SEM, DSC, and X-ray diffraction. The dissolution and bioavailability in rats were evaluated compared with a commercial product. Cycloamylose increased solubility of flurbiprofen approximately 12-fold and dissolution of it by 2-fold. Flurbiprofen was present in an unchanged crystalline state, and cycloamylose was a solubilizing agent for flurbiprofen in this solid dispersion. Furthermore, the dispersion gave higher AUC and C_max values compared with the commercial product, indicating that it improved the oral bioavailability of flurbiprofen in rats. Thus, the solid dispersion may be useful to deliver flurbiprofen with enhanced bioavailability without changes in crystalline structure.     

Development of raloxifene-solid dispersion with improved oral bioavailability via spray-drying technique

The purpose of this study was to develop a raloxifene-loaded solid dispersion with enhanced dissolution rate and bioavailability via spray-drying technique. Solid dispersions of raloxifene (RXF) were prepared with PVP K30 at weight ratios of 1:4, 1:6 and 1:8 using a spray-drying method, and characterized by differential scanning calorimetry, X-ray powder diffraction, scanning electron microscopy, and solubility and dissolution tests. The bioavailability of the solid dispersion in rats was also evaluated compared to those of RXF powder and commercial product. Results showed that the RXF-loaded solid dispersion was in amorphous form with increased solubility and dissolution rate. The absorption of RXF from solid dispersion resulted in approximately 2.6-fold enhanced bioavailability compared to pure drug. Moreover, RXF-loaded solid dispersion gave similar AUC, C_max and T_max values to the commercial product, suggesting that it was bioequivalent to the commercial product in rats. These findings suggest that an amorphous solid dispersion of RXF could be a viable option for enhancing the oral bioavailability of RXF.     

Design of fenofibrate microemulsion for improved bioavailability

The objective of the present study was to formulate a microemulsion system for oral administration to improve the solubility and bioavailability of fenofibrate. Various formulations were prepared using different ratios of oils, surfactants and co-surfactants (S&CoS). Pseudo-ternary phase diagrams were constructed to evaluate the microemulsification existence area. The formulations were characterized by solubility of the drug in the vehicles, mean droplet size, and drug content. The stability was also investigated by store for 3 months under 4 °C, 25 °C and 40 °C and diluted 100 times for 3 days. The optimal formulation consists of 25% Capryol 90, 27.75% Cremophore EL, 9.25% Transcutol P and 38% water (w/w), with a maximum solubility of fenofibrate up to ∼40.96 mg/mL. The microemulsion was physicochemical stable and mean droplet size was about 32.5-41.7 nm. The pharmacokinetic study was performed in dogs and compared with Lipanthy^® capsule. The result showed that microemulsion has significantly increased the C_max and AUC compared to that of Lipanthy^® capsule (p < 0.05). The oral bioavailability of fenofibrate microemulsions (FEN-MEs) in ME-3 and ME-4 were 1.63 and 1.30-fold higher than that of the capsule. Our results indicated that the microemulsions could be used as an effective formulation for enhancing the oral bioavailability of fenofibrate.     

Influence of polyvinylpyrrolidone quantity on the solubility,crystallinity and oral bioavailability of fenofibrate in solvent-evaporated microspheres

The objective of this study is to explore the influence of polyvinylpyrrolidone (PVP) quantity on the solubility, crystallinity and oral bioavailability of poorly water-soluble fenofibrate in solvent-evaporated microspheres. Numerous microspheres were prepared with fenofibrate, sodium lauryl sulphate (SLS) and PVP using the spray-drying technique. Their aqueous solubility, dissolution, physicochemical properties and pharmacokinetics in rats were assessed. The drug in the solvent-evaporated microspheres composed of fenofibrate, PVP and SLS at the weight ratio of 1:0.5:0.25 was not entirely changed to the amorphous form and partially in the microcrystalline state. However, the microspheres at the weight ratio of 1:4:0.25 provided the entire conversion to the amorphous form. The latter microspheres, with an improvement of about 115 000-fold in aqueous solubility and 5.6-fold improvement in oral bioavailability compared with the drug powder, gave higher aqueous solubility and oral bioavailability compared with the former. Thus, PVP quantity played an important role in these properties of fenofibrate in the solvent-evaporated microspheres.     

Development of an itraconazole‐loaded gelatin microcapsule with enhanced oral bioavailability: physicochemical characterization and in‐vivo evaluation

Objectives The aim of this study was to develop a novel itraconazole‐loaded gelatin microcapsule without ethanol with enhanced oral bioavailability. Methods Various gelatin microcapsules were prepared using a spray‐drying technique. Their physicochemical properties, dissolution, characteristics and pharmacokinetics in rats were evaluated and compared with those of a commercial product. Key findings The gelatin microcapsule at a weight ratio for itraconazole/gelatin/citric acid of 1 : 3 : 0.3 was spherical in shape with a smooth surface and inner hole, and gave a maximum drug solubility of about 700 μg/ml. The gelatin microcapsule dramatically increased the initial dissolution rate of itraconazole compared with a commercial product in simulated gastric fluids (pH 1.2). Moreover, at the same dose as the commercial product, it gave significantly higher initial plasma concentrations, C_max and AUC of itraconazole in rats than did the commercial product, indicating that providing the drug in the gelatin microcapsule caused enhanced absorption in rats. At half dose, it gave similar AUC, C_max and T_max values to the commercial product, suggesting that it was bioequivalent to the commercial product in rats. Conclusions The itraconazole‐loaded gelatin microcapsule without ethanol developed using a spray‐drying technique at half the dose of the commercial product can deliver itraconazole in a pattern that allows fast absorption in the initial phase, making it bioequivalent to the commercial product.     

Oral bioavailability of ketoprofen in suspension and solution formulations in rats: the influence of poloxamer 188

Objectives The aim of the current study was to investigate the effect of poloxamer 188 (P‐188) on the bioavailability of the BCS class 2 drug ketoprofen in vivo. Methods Aqueous suspension and solution formulations of ketoprofen with and without P‐188 were orally administered to fasted male Wistar rats. The intrinsic dissolution rate and solubility of ketoprofen in simulated intestinal fluid, in both the presence and absence of P‐188, was measured. Key findings The AUC and C_max were found to be significantly enhanced when ketoprofen was administered as suspension and P‐188 was present in the formulation (Susp P‐188) as compared to the surfactant‐free formulation (～4‐fold higher AUC, 7‐fold higher C_max). While drug solubility appeared to be almost unaffected by P‐188, a significantly faster dissolution was observed. In addition, the influence of P‐188 on the drug absorption process was investigated by comparison of solution formulations with and without P‐188. Conclusions The in‐vivo performance of these solutions, a pure buffer solution and a P‐188‐containing buffer solution showed no significant difference, suggesting that the increase in bioavailability for Susp P‐188 was primarily a consequence of the dissolution rate‐enhancing effect.     

The effects of food on the bioavailability of fenofibrate administered orally in healthy volunteers via sustained-release capsule

OBJECTIVE: To examine the effects of food on plasma concentration and bioavailability of fenofibrate administered as a sustained-release capsule. METHODS: Twenty-four healthy Korean volunteers were enrolled in a randomised, open-label, balanced, three-treatment, three-period, three-sequence, single oral dose, crossover pharmacokinetic study. A single dose of fenofibrate (250 mg sustained-release capsule) was administered on three occasions -- after overnight fasting, after consumption of a standard breakfast and after a high-fat breakfast. Serial blood samples were collected for the next 72 hours. Plasma fenofibric acid concentrations were measured by high-performance liquid chromatography, and pharmacokinetic parameters were calculated. RESULTS: The pharmacokinetic parameters were significantly affected by food intake. The high-fat breakfast affected the rate of absorption of fenofibrate more than the standard breakfast and fasted conditions. Specifically, the area under the plasma concentration-time curve from time zero to infinity (AUC(infinity)) and peak plasma concentration (C(max)) increased 2.45-fold and 2.89-fold, respectively, between the fasted and standard-fed conditions (p < 0.01). In addition, the high-fat meal caused 3.34-fold and 3.82-fold increases compared with the fasted condition in AUC(infinity) and C(max), respectively. A one-compartment open model with lag time successfully described the plasma concentrations of fenofibric acid. CONCLUSION: In healthy volunteers, AUC(infinity) and C(max) of fenofibrate, when administered via sustained-release capsules immediately after the consumption of food, was increased significantly from the fasting conditions (p < 0.01). The greatest AUC(infinity) and C(max) occurred when the capsules were taken after a high-fat breakfast.     

Development of a novel bi-coated combination capsule containing mosapride and probiotics for irritable bowel syndrome

Abstract

The objective of this study was to develop a novel combination product containing mosapride and probiotics for the treatment of irritable bowel syndrome. Enteric-coated hard gelatin capsules containing probiotics were prepared to protect acid-labile probiotics from the stomach by spray coating with hydroxypropylmethylcellulose phthalate, and then coated with various hydrophilic polymer solutions containing mosapride. The influence of different hydrophilic polymers on the aqueous solubility and dissolution of sparingly soluble mosapride from the capsule was investigated to select the one which imparted highest solubility to mosapride in an aqueous solution. The physicochemical properties of the hydrophilic polymer coating were assessed using SEM and DSC. In addition, the bioavailability of the mosapride-coated capsule in beagle dog was evaluated and compared to that of conventional mosapride tablet (CMT). Based on DSC studies, the mosapride in polymer coating underwent amorphization or molecular dispersion. The enteric-capsule coated with mosapride/HPMC exhibited improved solubility of mosapride at acidic pH and showed significantly improved AUC (1.5-fold) and C_max (1.6-fold) compared to the CMT. In conclusion, drug/polymer coated enteric gelatin capsule can be an alternative technique for co-delivery of sparingly water-soluble drug and acid-labile drug for enhanced solubility and bioavailability as well as for protection from acid degradation.     

Enhanced dissolution of ibuprofen using solid dispersion with poloxamer 407

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility, and in-vitro ibuprofen release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting towards the lower melting temperature of the drug peak in SDs and physical mixtures in DSC study indicated the possibilities of drug-polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C_max, and a significant decrease in T_max over pure ibuprofen. Comparison of the enhanced solubility, dissolution, AUC, and C_max of ibuprofen from different poloxamers suggested that the preparation of ibuprofen SDs using P 407 as a meltable hydrophilic polymer carrier could be a promising approach to improve its solubility, dissolution and absorption rate.     

Development of novel itraconazole-loaded solid dispersion without crystalline change with improved bioavailability

To develop a novel itraconazole-loaded solid dispersion without crystalline change with improved bioavailability, various itraconazole-loaded solid dispersions were prepared with water, polyvinylpyrroline, poloxamer and citric acid. The effect of carriers on aqueous solubility of itraconazole was investigated. Their physicochemical properties were investigated using SEM, DSC, and powder X-ray diffraction. The dissolution, bioavailability in rats and stability of solid dispersions were evaluated. Unlike conventional solid dispersion system, the itraconazole-loaded solid dispersion with relatively rough surface did not change crystalline form of drug. Our DSC and powder X-ray diffraction results suggested that this solid dispersion was formed by attaching hydrophilic carriers to the surface of drug without crystal change, resulting in conversion of the hydrophobic drug to hydrophilic form. The itraconazole-loaded solid dispersion at the weight ratio of itraconazole/polyvinylpyrroline/poloxamer of 10/2/0.5 gave maximum drug solubility of about 20 μg/mL. It did not change the crystalline form of drug for at least 6 months, indicating that it was physically stable. It gave higher AUC, C_max and T_max compared to itraconazole powder and similar values to the commercial product, suggesting that it was bioequivalent to commercial product in rats. Thus, it would be useful to deliver a poorly water-soluble itraconazole without crystalline change with improved bioavailability.     

Comparison of the solubility and pharmacokinetics of sildenafil salts

To develop sildenafil lactate, a salt form of sildenafil with improved solubility and bioavailability of poorly water-soluble sildenafil base, this salt form was prepared using a spray dryer. Its solubility and pharmacokinetics in rabbits were evaluated compared with sildenafil base and sildenafil citrate. Sildenafil lactate improved the solubility of sildenafil in various solvents including distilled water compared with sildenafil citrate. It provided higher AUC and C_max and, shorter t_1/2 values than did the other materials, indicating that it improved the oral bioavailability of sildenafil in rabbits. Our results suggest that sildenafil lactate would be useful to deliver sildenafil in a pattern that allows fast absorption and late metabolism. Furthermore, the plasma concentration at 0.25 h in sildenafil lactate was similar to the C_max value at T_max (0.5 h) in sildenafil citrate. Thus, sildenafil lactate might provide a faster onset of action and immediate erection compared with sildenafil citrate, the conventional drug.     

Solubilized formulation of olmesartan medoxomil for enhancing oral bioavailability

Olmesartan medoxomil (OLM) is an antihypertensive angiotensin II receptor blocker. OLM has a low bioavailability (BA), approximately 26% in humans, due to its low water solubility and efflux by drug resistance pumps in the gastrointestinal tract. Self-microemulsifying drug delivery system (SMEDDS), which is easily emulsified in aqueous media under gentle agitation and digestive motility, was formulated to increase the oral BA of OLM. Among the surfactants and oils studied, Capryol 90, Tween 20, and Tetraglycol were chosen and combined at a volume ratio of 1:6:3 on the basis of equilibrium solubility and phase diagram experiments. The mean droplet size of SMEDDS was 15 nm. In an oral absorption study in rats, SMEDDS formulation brought faster absorption compared to suspension, showing a T _max value of 0.2 hr. The C _max and AUC values of SMEDDS formulation were significantly higher than those of suspension, revealing a relative BA of about 170%. Our study demonstrated the potential usefulness of SMEDDS for the oral delivery of poorly absorbable compounds, including OLM.     

Simvastatin does not have a clinically significant pharmacokinetic interaction with fenofibrate in humans

Simvastatin and fenofibrate are both commonly used lipid-regulating agents with distinct mechanisms of action, and their coadministration may be an attractive treatment for some patients with dyslipidemia. A 2-period, randomized, open-label, crossover study was conducted in 12 subjects to determine if fenofibrate and simvastatin are subject to a clinically relevant pharmacokinetic interaction at steady state. In treatment A, subjects received an 80-mg simvastatin tablet in the morning for 7 days. In treatment B, subjects received a 160-mg micronized fenofibrate capsule in the morning for 7 days, followed by a 160-mg micronized fenofibrate capsule dosed together with an 80-mg simvastatin tablet on days 8 to 14. Because food increases the bioavailability of fenofibrate, each dose was administered with food to maximize the exposure of fenofibric acid. The steady-state pharmacokinetics (AUC(0-24h), C(max), and t(max)) of active and total HMG-CoA reductase inhibitors, simvastatin acid, and simvastatin were determined following simvastatin administration with and without fenofibrate. Also, fenofibric acid steady-state pharmacokinetics were evaluated with and without simvastatin. The geometric mean ratios (GMRs) for AUC(0-24h) (80 mg simvastatin [SV] + 160 mg fenofibrate)/(80 mg simvastatin alone) and 90% confidence intervals (CIs) were 0.88 (0.80, 0.95) and 0.92 (0.82, 1.03) for active and total HMG-CoA reductase inhibitors. The GMRs and 90% CIs for fenofibric acid (80 mg SV + 160 mg fenofibrate/160 mg fenofibrate alone) AUC(0-24h) and C(max) were 0.95 (0.88, 1.04) and 0.89 (0.77, 1.02), respectively. Because both the active inhibitor and fenofibric acid AUC GMR 90% confidence intervals fell within the prespecified bounds of (0.70, 1.43), no clinically significant pharmacokinetic drug interaction between fenofibrate and simvastatin was concluded in humans. The coadministration of simvastatin and fenofibrate in this study was well tolerated.     

Fenofibric acid for hyperlipidemia

INTRODUCTION: 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitors (i.e., statins) are the mainstay of therapy for hyperlipidemia, as per the current National Cholesterol Education Program (NCEP) recommendation. However, the role of other agents, such as the fibrates, is continually being debated in the context of incremental risk reduction, especially in the setting of mixed dyslipidemia. Results from the ACCORD Trial have further added to the confusion. Fibrates also have a role to play in familial hyperlipidemias and in hypertriglyceridemia. Fenofibric acid is one of the newly approved forms of fenofibrate with enhanced bioavailability and was recently approved by the Food and Drug Administation (FDA) for the treatment of various types of hyperlipidemia, in conjunction with statins. AREAS COVERED: This article reviews the role of fenofibric acid in the context of results from recent randomized trials on fenofibrate, including the ACCORD Trial. It discusses the current status of fenofibric acid in the management of dyslipidemia, especially in combination with statins, and also addresses the comparative efficacy and safety profile of this new molecule against other agents in its class. EXPERT OPINION: Fenofibric acid in combination with low- to moderate-dose statins is an effective and safe option in the treatment of mixed dyslipidemia, although the long-term effects on cardiovascular risk reduction need to be explored further.     

In vitro and in vivo evaluation of a self-microemulsifying drug delivery system for the poorly soluble drug fenofibrate

Fenofibrate is indicated in hypercholesterolemia and hypertriglyceridemia alone or combined (types IIa, IIb, III, IV, and V dyslipidemias). However, due to its low solubility in water, it has low bioavailability after oral administration. In order to improve the dissolution rate, fenofibrate was formulated into a self-microemulsifying drug delivery system (SMEDDS). We used pseudoternary phase diagrams to evaluate the area of microemulsification, and an in vitro dissolution test was used to investigate the dissolution rate of fenofibrate. The optimized formulation for in vitro dissolution and bioavailability assessment consisted of propylene glycol laurate (Lauroglycol FCC) (60 %), macrogol-15-hydroxystearate (Solutol HS 15) (27 %), and diethylene glycol monoethyl ether (Transcutol-P) (13 %). The mean droplet size of the oil phase in the microemulsion formed by the SMEDDS was 131.1 nm. The dissolution rate of fenofibrate from SMEDDS was significantly higher than that of the reference tablet. In vivo pharmacokinetics study of fenofibrate in beagles administered SMEDDS-A form resulted in a 3.7-fold increase in bioavailability as compared with the reference drug. Our studies suggested that the fenofibrate containing SMEDDS composition can effectively increase the solubility and oral bioavailability of poorly water-soluble drugs.     

Physicochemical characterization and in vivo evaluation of flurbiprofen-loaded solid dispersion without crystalline change

To develop a novel flurbiprofen-loaded solid dispersion without crystalline change, various flurbiprofen-loaded solid dispersions were prepared with water, sodium carboxylmethyl cellulose (Na-CMC), and Tween 80. The effect of Na-CMC and Tween 80 on aqueous solubility of flurbiprofen was investigated. The physicochemical properties of solid dispersions were investigated using SEM, DSC, and X-ray diffraction. The dissolution and bioavailability in rats were evaluated compared to commercial product. Unlike conventional solid dispersion systems, the flurbiprofen-loaded solid dispersion gave a relatively rough surface and changed no crystalline form of drug. These solid dispersions were formed by attaching hydrophilic carriers to the surface of drug without crystal change, resulting in changing the hydrophobic drug to hydrophilic form. Furthermore, the flurbiprofen-loaded solid dispersion at the weight ratio of flurbiprofen/Na-CMC/Tween 80 of 6/2.5/0.5 improved ～ 60-fold drug solubility. It gave higher AUC, T_max, and C_max compared to commercial product. The solid dispersion improved almost 1.5-fold bioavailability of drug compared to commercial product in rats. Thus, the flurbiprofen-loaded solid dispersion would be useful to deliver poorly water-soluble flurbiprofen with enhanced bioavailability without crystalline change.     

Investigation of the effect of solubility increase at the main absorption site on bioavailability of BCS class II drug (risperidone) using liquisolid technique

BCS class II drugs usually suffer inadequate bioavailability as dissolution step is the absorption rate limiting step. In this work, the effect of solubility increase at the main absorption site for these drugs was investigated using risperidone as a drug model. Liquisolid technique was applied to prepare risperidone per-oral tablets of high dissolution rate at intestinal pH (6.8) using versatile nonionic surfactants of high solubilizing ability [Transcutol HP, Labrasol and Labrasol/Labrafil (1:1) mixture] as liquid vehicles at different drug concentrations (10–30%) and fixed (R). The prepared liquisolid tablets were fully evaluated and the dissolution rate at pH 6.8 was investigated. The formulae that showed significantly different release rate were selected and subjected to mathematical modeling using DE₂₅, MDT and similarity factor (f2). Depending on mathematical modeling results, formula of higher dissolution rate was subjected to solid state characterization using differential scanning calorimetric (DSC), infrared spectroscopy (IR) and X-ray diffraction (XRD). Finally, the drug bioavailability was studied in comparison to conventional tablets in rabbits. Results showed that liquisolid tablet prepared using Labrasol/Labrafil (1:1) mixture as liquid vehicle containing 10% risperidone is a compatible formula with law drug crystallinity and higher dissolution rate (100% in 25?min). The drug bioavailability was significantly increased in comparison to the conventional tablets (1441.711?μg h/mL and 137.518?μg/mL in comparison to 321.011?μg h/mL and 38.673?μg/mL for AUC and Cp_max, respectively). This led to the conclusion that liquisolid technique was efficiently improved drug solubility and solubility increase of BCS class II drugs at their main absorption site significantly increases their bioavailability.