共查询到20条相似文献,搜索用时 31 毫秒
1.
Md Quamar Azam AA Iraqi MKA Sherwani Amir Bin Sabir M Abbas Naiyer Asif 《Indian Journal of Orthopaedics》2009,43(1):62-66
Background:
Neglected femoral neck fracture in adults still poses a formidable challenge. Existing treatment options varies from osteotomy (with or without graft) to osteosynthesis using various implants and grafting techniques (muscle pedicle, vascularized, and nonvascularized fibula). The aim of this study was to assess outcome of nonvascularized fibular strut graft and cancellous screw fixation in neglected femoral neck fractures in the younger age group.Materials and Methods:
Medical records of 32 patients of neglected femoral neck fracture, in the age group of 22-45 years (mean 37.8 years), operated between May 1994 to December 2001, were retrospectively reviewed. After the application of inclusion and exclusion criteria, 28 patients having three years minimum follow-up (mean 4.6 years) were included. Delay between injury and operation varied from four weeks to 42 weeks (mean 16.4 weeks). Closed reduction was achieved in 17 patients; open reduction through Watson-Jones anterolateral approach was performed in the remaining 15 patients in whom closed reduction failed. The fracture was transfixed with three parallel guide wires. Appropriate sized cannulated lag screw (7 mm) was then inserted in two of the wires. Selection of the third guide wire for fibula depended on the space available in both anteroposterior and lateral view.Results:
Satisfactory bony union was obtained in 25 patients, of whom in four cases, the union occurred in 10-20° (mean 15°) of varus. Nonunion occurred in three patients (9.37%), and aseptic necrosis occurred in another six patients (18.75%). Of the 25 patients where union was achieved, five patients showed excellent results; 14 good and six had poor functional result, as evaluated using modified Anglen criteria.Conclusion:
Nonvascularized fibular strut graft along with cancellous screws provides a dependable and technically less-demanding alternative procedure for neglected femoral neck fractures in young adults. Fibula being cortical provides mechanical strength besides stimulating the union and getting incorporated as biological graft. 相似文献2.
Basant Kumar Bhuyan 《Indian Journal of Orthopaedics》2012,46(4):439-446
Background:
Neglected intracapsular femoral neck fracture in young patients may fail to unite because of the excessive shearing strain at the fracture site and it is a surgical challenge to any orthopedic surgeon. The problem is compounded by resorption of the femoral neck and avascular necrosis (AVN) of femoral head. There is no satisfactory solution available in the management of femoral neck fracture as far as the union of the fracture and AVN of femoral head are concerned. Muscle pedicle bone grafting has been advocated to provide additional blood supply to the femoral head. We report a retrospective analysis of 48 cases of neglected femoral neck fracture treated by internal fixation and tensor fascia latae based muscle pedicle bone grafting.Materials and Methods:
48 patients with femoral neck fractures with age varied from 20 to 53 years (average age 32.9 years) with male to female ratio of 2:1 were enrolled. All fractures were more than 3 weeks old with mean delay being 86 days (22–150 days). Open reduction and internal fixation along with tensor fascia latae muscle pedicle bone grafting was done in all cases. It was supplemented by multiple drilling and cortico-cancellous bone grafting. Fracture fixation was done with three parallel 6.5-mm AO cannulated cancellous lag screws and the graft fixed with a 4-mm cancellous screw to provide a secure fixation. During the followup period of 2-6.8 years (average 4.4 years) the results were assessed clinically by modified Harris hip scoring system and radiologically by the evidence of signs of fracture union.Results:
Union was achieved in 41/48 (85.41%) cases which were followed for an average period of 4.4 years (2–6.8 years) with good functional results and ability to squat and sit cross-legged. Results were assessed according to modified Harris Hip Scoring system and found to be excellent in 19, good in 22, fair in 5, and poor in 2 patients. Complications were nonunion, (n=3) avascular necrosis (n=2), and coxa vara deformity (n=2).Conclusion:
Internal fixation with muscle pedicle bone grafting is a suitable option to secure union in neglected femoral neck fractures in physiologically active patients with late presentation. 相似文献3.
Purpose:
The aim of this study is to evaluate whether two 3.0 mm Schanz screws in two-part proximal humeral fractures (plus one additional Schanz screw or K wire in three-part fractures) can provide enough stability to allow early mobilization until healing occurs in elderly patients.Settings and Design:
This prospective study was performed in the Orthopaedic Department of our University Hospital.Patients and Methods:
We performed closed reduction and percutaneous pinning for thirty-three patients with proximal humerus fractures. Twenty-seven patients were available for the final follow-up. Of those 27 patients, 17 had two-part surgical neck fractures; while 10 had three-part fractures. For fixation, we used two 3.0 mm Schanz screws in patients with two-part fractures plus one additional Schanz screw or K wire in the 10 patients with three-part fractures.Results:
The mean Constant score modified according to the age and sex was 89.8% (range: 77.3-97.2%). Fifteen patients had excellent results, 11 patients had good results, and one patient had a fair result.Conclusion:
Closed reduction and percutaneous pinning with two Schanz screws for two-part surgical neck humeral fractures, plus an additional Schanz screw or K wire for three-part proximal humeral fractures is a useful and effective technique that provides enough stability to allow an early rehabilitation program till union occurs in elderly patients.Level of Evidence:
IV; therapeutic study, case series. 相似文献4.
5.
SS Suresh 《Indian Journal of Orthopaedics》2009,43(3):286-291
Background:
Fractures of the capitellum are rare injuries of the elbow usually seen in the adolescents. This fracture is often missed in the emergency room if a proper radiograph is not available. Recent reports have described many modalities of treatment favoring headless screw for fixation. The facility for headless screw fixation, however, is not available in most centers. This paper presents the diagnosis and management of type 4 capituller fractures (Mckee) with gadgets available in a district hospital.Materials and Methods:
Between 2004 and 2007 three patients with right sided type IV capetullar fracture were treated in a district hospital. There were two boys aged 15 and 17 and one 33 years old lady. In one case, the fracture was missed in the emergency room. A double arc sign in the lateral views of the X-rays of the elbow was seen in all the cases. In each case a preoperative CT scan was done and a diagnosis of Mckee type IV fracture of the capitellum was made. Under tourniquet, using extended lateral approach, open reduction and internal fixation was done using 4mm partially threaded AO cancellous screws (n=2) and 2.7 mm AO screws (n=1), under vision from posterior to anterior direction from the posterior aspect of lateral condyle of humerus avoiding articular penetration.Results:
All the fractures united uneventfully. At the end of one year follow-up, two cases had excellent elbow function; implants were removed and there were no signs of AVN or arthritis. The third case had good elbow ROM at 11 months without AVN.Conclusion:
Double arc sign on lateral X-rays of the elbow along with pre-operative CT scan evaluation is important to avoid a missed diagnosis and analysis of type IV capitellur fracture. Fixation with non-cannulated ordinary AO screws using extended Kocher''s lateral approach has given good results. 相似文献6.
Snajay Kumar Ajay Bharti Ashok Rawat Vineet Kumar Sachin Avasthi 《Journal of Clinical Orthopaedics and Trauma》2015,6(1):6-11
Objectives
Aim of our study was to assess the role of addition of fibular strut graft to multiple cancellous screws in functional outcome, union and complications associated with those managed by only multiple cancellous screws in fresh femoral neck fractures.Methods
A randomized control trial study was conducted on the patients of femoral neck fractures managed with multiple cancellous screws (group A) and multiple cancellous screws with fibular graft (group B). Patients aged between 20 and 50 years, having Gardens type III or IV fracture with duration of injury less than two weeks were included in the study.Results
Eighty seven cases were analysed n = 45 were in group A and n = 42 in group B. Functional outcome (Harris hip score) was excellent in 30 patients in group A as compared to 12 in Group B which was statistically significant favouring group A. The time of full weight bearing, union and non union rates showed no statistical significance (p > 0.05). On statistical grounds none of the procedures proved to be better than other.Conclusions
Fresh femoral neck fracture in young adults managed with multiple cancellous screws fixation with fibular graft has no added advantage over multiple cancellous screws fixation alone. 相似文献7.
Pankaj Kumar Mishra Anuj Gupta Suresh Chandra Gaur 《Indian Journal of Orthopaedics》2014,48(5):470-475
Background:
Femoral neck fractures are notorious for complications like avascular necrosis and nonunion. In developing countries, various factors such as illiteracy, low socioeconomic status, ignorance are responsible for the delay in surgery. Neglected fracture neck femur always poses a formidable challenge. The purpose of this study was to evaluate the results of triple muscle pedicle bone grafting using sartorius, tensor fasciae latae and part of gluteus medius in neglected femoral neck fracture.Materials and Methods:
This is a retrospective study with medical record of 50 patients, who were operated by open reduction, internal fixation along with muscle pedicle bone grafting by the anterior approach. After open reduction, two to three cancellous screws (6.5 mm) were used for internal fixation in all cases. A bony chunk of the whole anterior superior iliac spine of 1 cm thickness, 1 cm width and 4.5 cm length, taken from the iliac crest comprised of muscle pedicle of sartorius, tensor fascia latae and part of gluteus medius. Then the graft with all three muscles mobilized and put in the trough made over the anterior or anterosuperior aspect of the femoral head. The graft was fixed with one or two 4.5 mm self-tapping cortical screw in anterior to posterior direction.Results:
14 patients were lost to followup. The results were based on 36 patients. We observed that in our series, there was union in 34, out of 36 (94.4%) patients. All patients were within the age group of 15-51 years (average 38 years) with displaced neglected femoral neck fracture of ≥30 days. Mean time taken for full clinicoradiological union was 14 weeks (range-10-24 weeks).Conclusion:
Triple muscle pedicle bone grafting gives satisfactory results for neglected femoral neck fracture in physiologically active patients. 相似文献8.
Background:
Ender and Simon Weidner popularized the concept of closed condylocephlic nailing for intertrochanteric fractures in 1970. The clinical experience of authors revealed that Ender nailing alone cannot provide secure fixation in elderly patients with osteoporosis. Hence we conducted a study to evaluate the efficacy of a combined fixation procedure using Ender nails and a cannulated compression screw for intertrochanteric fractures.Materials and Methods:
76 patients with intertrochanteric fractures were treated using intramedullary Ender nails and cannulated compression screw from January 2004 to December 2007. The mean age of the patients was 80 years (range 70-105 years).Using the Evan’s system of classification 49 were stable and 27 unstable fractures. Inclusion criteria was high risk elderly patients (age > 70 years) with intertrochanteric fracture. The exclusion criteria included patients with pressure sores over the trochanteric region. Many patients had pre-existing co-morbidities like diabetes mellitus, hypertension, COPD, ischemic heart disease, CVA and coronary artery bypass surgery. The two Ender nails of 4.5mm each were passed across the fracture site into the proximal neck. This was reinforced with a 6.5 mm cannulated compression screw passed from the sub trochanteric region, across the fracture into the head.Results:
The mean follow-up was 14 months (range 9-19 months) Average time to fracture union was 10 weeks (range 6-16 weeks). The mean knee ROM was 130° (± 5°). There was no case of nail penetration into hip joint. In five cases with advanced osteoporosis there was minimal migration of Ender nails distally.Conclusions:
The Ender nailing combined with compression screw fixation in cases of intertrochanteric fractures in high risk elderly patients could achieve reliable fracture stability with minimal complications. 相似文献9.
Pramod Saini Abhinav Aggrawal Sanjay Meena Vivek Trikha Samarth Mittal 《Journal of Clinical Orthopaedics and Trauma》2014,5(4):252-256
Aim
To describe here a technique of miniarthrotomy assisted percutaneous screw insertion for displaced Herscovici type B and C medial malleolar fractures.Method
Incision was made centred over the superomedial angle of the ankle mortise, about half a cm medial to tibialis anterior. Arthrotomy was done and reduction obtained. Percuntaneously, two 4 mm cancellous cannulated screws were inserted through medial malleolus.Results and conclusion
This approach allows direct visualization of reduction, removal of entrapped soft tissue and preservation of saphenous vein and nerve. 相似文献10.
Shyam K Saraf Ravindra P Singh Vakil Singh Ashish Varma 《Indian Journal of Orthopaedics》2013,47(3):238-243
Background:
The objective of this cadaveric study was to analyze the effects of iatrogenic pedicle perforations from screw misplacement on the mean pullout strength of lower thoracic and lumbar pedicle screws. We also investigated the effect of bone mineral density (BMD), diameter of pedicle screws, and the region of spine on the pullout strength of pedicle screws.Materials and Methods:
Sixty fresh human cadaveric vertebrae (D10–L2) were harvested. Dual-energy X-ray absorptiometry (DEXA) scan of vertebrae was done for BMD. Titanium pedicle screws of different diameters (5.2 and 6.2 mm) were inserted in the thoracic and lumbar segments after dividing the specimens into three groups: a) standard pedicle screw (no cortical perforation); b) screw with medial cortical perforation; and c) screw with lateral cortical perforation. Finally, pullout load of pedicle screws was recorded using INSTRON Universal Testing Machine.Results:
Compared with standard placement, medially misplaced screws had 9.4% greater mean pullout strength and laterally misplaced screws had 47.3% lesser mean pullout strength. The pullout strength of the 6.2 mm pedicle screws was 33% greater than that of the 5.2 mm pedicle screws. The pullout load of pedicle screws in lumbar vertebra was 13.9% greater than that in the thoracic vertebra (P = 0.105), but it was not statistically significant. There was no significant difference between pullout loads of vertebra with different BMD (P = 0.901).Conclusion:
The mean pullout strength was less with lateral misplaced pedicle screws while medial misplaced pedicle screw had more pullout strength. The pullout load of 6.2 mm screws was greater than that of 5.2 mm pedicle screws. No significant correlation was found between bone mineral densities and the pullout strength of vertebra. Similarly, the pullout load of screw placed in thoracic and lumbar vertebrae was not significantly different. 相似文献11.
Hongwei Wang Xinhua Liao Xianguang Ma Changqing Li Jianda Han Yue Zhou 《Indian Journal of Orthopaedics》2013,47(4):352-356
Background:
Although stimulus evoked electromyography (EMG) is commonly used to confirm the accuracy of pedicle screw placement. There are no studies to differentiate between solid screws and hollow screws to the electrical resistance of pedicle screws. We speculate that the electrical resistance of the solid and hollow pedicle screws may be different and then a potential source of error with stimulus-evoked EMG may happen.Materials and Methods:
Resistance measurements were obtained from 12 pedicle screw varieties (6 screws of each manufacturer) across the screw shank based on known constant current and measured voltage. The voltage was measured 5 times at each site.Results:
Resistance of all solid screws ranged from 0.084 Ω to 0.151 Ω (mean =0.118 ± 0.024 Ω) and hollow screws ranged from 0.148 Ω to 0.402 Ω (mean = 0.285 ± 0.081 Ω). There was a significant difference of resistance between the solid screws and hollow screws (P < 0.05). The screw with the largest diameter no matter solid screws or hollow screws had lower resistance than screws with other diameters. No matter in solid screws group or hollow screws group, there were significant differences (P < 0.05) between the 5.0 mm screws and 6.0 mm screws, 6.0 mm screws and 7.0 mm screws, 5.0 mm screws and 7.0 mm screws, 4.5 mm screws and 5.5 mm screws, 5.5 mm screws and 6.5 mm screws, 4.5 mm screws and 6.5 mm screws. The resistance of hollow screws was much larger than the solid screws in the same diameter group (P < 0.05).Conclusions:
Hollow pedicle screws have the potential for high electrical resistance compared to the solid pedicle screws and therefore may affect the EMG response during stimulus-evoked EMG testing in pedicle screw fixation especially in minimally invasive percutaneous pedical screw fixation surgery. 相似文献12.
Purpose
This retrospective study compares Kirschner wires versus 3.5-mm diameter AO cannulated screw internal fixation in treatment for the displaced lateral humeral condyle fractures.Methods
The study included 62 patients (42 boys, 20 girls; mean age 6.93 years; age range two to 14 years) with displaced lateral humeral condyle fractures. All patients were treated by open reduction and Kirschner wires or cannulated screw fixation. The clinical outcomes were evaluated according to the criteria of Hardacre et al. The mean follow-up period was 39.4 months (range 21–95 months).Results
There was no statistically significant difference in clinical outcome between these two groups (P > 0.05). Five patients (16.7%) developed skin infection around K-wires, while no infection occurred in fracture with screws. An obvious lateral prominence occurred in 11 (36.7%) patients with K-wires and four (12.5%) patients with screws. Nine (30%) patients with K-wires and two (6.3%) patients with screws had a lack of 10° of extension of the elbow compared with the other side.Conclusion
Both K-wires and cannulated screw fixation are effective in treatment for displaced lateral humeral condyle fracture. K-wires can pass through the ossific nucleus of capitulum without damaging it, but a longer period of external fixation and local skin care will be required. The screws can reduce the possibility of lateral prominence and promote the function of elbow by continuously stabilising the fracture, but a second operation is need for screw removal. 相似文献13.
MP Singh Aditya N Aggarwal Anil Arora Ish K Dhammi Jagjit Singh 《Indian Journal of Orthopaedics》2008,42(1):43-48
Background:
Displaced intracapsular femoral neck fractures continue to be a difficult problem to treat. Various treatment modalities and their modifications have been proposed to improve the outcome. Osteosynthesis and primary valgus angulation osteotomy is one of them. Technique and outcome in a consecutive series of recent intracapsular femoral neck fractures in young adults, from a single center, is presented.Materials and Methods:
Fifty-five patients of recent (<3 weeks old) displaced intracapsular fracture neck femur (Garden III and IV, Pauwels III, with or without comminution) in the age group 20-50 years (mean 35.4±10.4 years) were subjected to osteosynthesis and primary valgus intertrochanteric osteotomy using contoured broad dynamic compression plate (DCP). The patients were followed up from two to six years (mean 4.6 years).Results:
Fifty-one fractures united by six months of the index procedure (92.7% union range). Avascular necrosis (AVN) developed in six patients (11%). The other complications were shortening (six), coxa vara (two), infection (two) and delayed union at osteotomy site (one). Excellent results were achieved in 48, good/fair in four and poor in three patients.Conclusion:
Osteosynthesis with cancellous screw and primary valgus intertrochanteric osteotomy stabilized by a contoured broad DCP is a simple, easy to perform, biological treatment. Failure in a particular case can be treated with any appropriate second procedure.Level of Evidence:
IV 相似文献14.
Background:
The treatment of displaced intracapsular femoral neck fracture is still an unsolved problem. Non-union and avascular necrosis are the two main complications of this fracture, especially if patient presents late. Muscle pedicle bone grafting has been advocated to provide additional blood supply. We present analysis of our 32 cases of displaced femoral neck fracture treated by internal fixation and quadratus femoris based muscle pedicle bone grafting.Materials and Methods:
Open reduction and internal fixation with muscle pedicle grafting was done in 32 patients. The age of patients varied from 14-62 years (average age 45 years) with male to female ratio of 13:3. Twenty-nine fractures were more than three weeks old. All the cases were treated by Meyers'' procedure. The fracture was internally fixed after open reduction and then a muscle pedicle graft was applied. It was supplemented by cancellous bone graft in seven cases. Fixation was done by parallel cancellous lag screws (n = 19), crossed Garden''s screws (n = 7), parallel Asnis screws (n = 5) and Moore''s pin (n = 1).Quadratus femoris muscle pedicle graft was used in 32 cases. In the initial 12 cases the graft was fixed with circumferential proline sutures, but later, to provide a secure fixation, the graft was fixed with a cancellous screw (n = 20). Postoperative full weight bearing was deferred to an average of 10 weeks.Results:
Union was achieved in 26/29 (89.65%) cases which could be followed for an average period of 3.4 years, (2-8.5 years) with good functional results and had the ability to squat and sit cross-legged. Results were based on hip rating system given by Salvatti and Wilson. The results were excellent in 15 cases, good in four cases, fair in four cases and poor in six cases. Complications were avascular necrosis (n = 2), transient foot drop (n = 2), coxa-vara (n = 1) and temporary loss of scrotal sensation (n = 1).Conclusion:
Muscle pedicle bone grafting with internal fixation is a viable treatment option in displaced femoral neck fractures with late presentation. 相似文献15.
Arvind G Kulkarni Siddharth M Shah Ruchira A Marwah Prasad B Hanagandi Inder R Talwar 《Indian Journal of Orthopaedics》2013,47(3):250-254
Background:
Anterior fixation using two 3.5 mm screws is typically recommended for type II odontoid fractures. However, it is unsuitable in patients with an odontoid diameter of <9.0 mm. There is no data regarding the morphology of odontoid process in the Indian population. The aim of our study was to: a) Measure the external diameters of odontoid process in the Indian population using CT scan and thus determine the feasibility of two 3.5 mm screw fixation in them. b) Determine if any correlation exists between body height (Ht) and weight (Wt) and external odontoid diameters.Materials and Methods:
CT images of odontoid process of 100 consecutive patients were analyzed. Antero- posterior (AP) and transverse (TD), outer diameters of the odontoid process were measured from the base and at 1 mm interval upwards on axial CT images.Results:
The mean AP and mean TD were 11.52 mm and 9.85 mm, respectively. Fifty-five (55%) of the patients had at least one TD <9.0 mm. Five (5%) patients had at least one TD <7.4 mm. None of the patients had any diameter <5.5 mm. Body Ht correlated significantly with mean AP and mean TD of the odontoid process (AP: r = 0.276, P = 0.013; TD: r = 0.359, P = 0.001), whereas body Wt correlated significantly only with mean TD (AP: r = 0.162, P = 0.15; TD: r = 0.297, P = 0.007).Conclusion:
More than half of the study population (55%) was unsuitable for two 3.5 mm screw fixation for type II odontoid fracture. Two 2.7 mm screws can be safely used in 95% of the population. A 4.5 mm Herbert screw can be safely used in the entire population. We recommend two 2.7 mm screws or a 4.5 mm Herbert screw for fixation of these fractures in the Indian population. Body height showed a significant correlation with external odontoid diameters, whereas weight showed significant correlation only with TD of the odontoid process. 相似文献16.
Ahmet A Karaarslan Ahmet Karaka?li Hakan Aycan Berivan ?e?en Didem Venüs Yildiz Erhan Sesli 《Indian Journal of Orthopaedics》2016,50(1):94-98
Background:
Proximal locking screw deformation and screw fracture is a frequently seen problem for femur interlocking nailing that affects fracture healing. We realized that there is lack of literature for the right level for the proximal locking screw. We investigated the difference of locking screw bending resistance between the application of screws on different proximal femoral levels.Materials and Methods:
We used a total of 80 proximal locking screws for eight groups, 10 screws for each group. Three-point bending tests were performed on four types of screws in two different trochanteric levels (the lesser trochanter and 20 mm proximal). We determined the yield points at three-point bending tests that a permanent deformation started in the locking screws using an axial compression testing machine.Results:
The mean yield point value of 5 mm threaded locking screws applied 20 mm proximal of lesser trochanter was 1022 ± 49 (range 986–1057) (mean ± standard deviation, 95% confidence interval). On the other hand, the mean yield point value of the same type of locking screws applied on the lesser trochanteric level was 2089 ± 249 (range 1911–2268). Which means 103% increase of screw resistance between two levels (P = 0.000). In all screw groups, on the lesser trochanter line we determined 98–174% higher than the yield point values of the same type of locking screws in comparison with 20 mm proximal to the lesser trochanter (P = 0.000).Conclusion:
According to our findings, there is twice as much difference in locking screw bending resistance between these two application levels. To avoid proximal locking screw deformation, locking screws should be placed in the level of the lesser trochanter in nailing of 1/3 middle and distal femur fractures. 相似文献17.
Müller MC Belei P Pennekamp PH Kabir K Wirtz DC Burger C Weber O 《International orthopaedics》2012,36(7):1463-1469
Purpose
Medial femoral neck fractures are common, and closed reduction and internal fixation by three cannulated screws is an accepted method for the surgical treatment. Computer navigation for screw placement may reduce fluoroscopy time, the number of guidewire passes and optimise screw placement.Methods
In the context of a sawbone study, a computer-assisted planning and navigation system based on 3D-imaging for guidewire placement in the femoral neck was tested to improve screw placement. Three screws were inserted into 12, intact, femoral sawbones using the conventional technique and into 12, intact, femoral sawbones guided by the computer-based navigation system. Guidewire and subsequent screw placement in the femoral neck were evaluated.Results
Use of the navigation system resulted in a significant reduction of the number of drilling attempts (p ≤ 0.05) and achieved optimised accuracy of implant placement by attaining significantly better screw parallelism (p ≤ 0.05) and significantly enlarged neck-width coverage by the three screws (p ≤ 0.0001). Computer assistance significantly increased the number of fluoroscopic images (p ≤ 0.001) and the operation time (p ≤ 0.0001).Conclusions
Three-dimensional computer-assisted navigation improves accuracy of cannulated screw placement in femoral neck while increasing the number of fluoroscopic images and operation time. Additional studies including fractured sawbones and cadaver models with the goal of reducing operation time are indispensable before introduction of this navigation system into clinical practice. 相似文献18.
The compressive forces generated by the AO/ASIF 3.0 mm cannulated cancellous and 2.0 mm cortical screws, Mini-Acutrak and Herbert/Whipple small bone cannulated screws were measured in the laboratory with the use of simulated cancellous bone and a load cell washer as a means of quantifying their fixation capabilities. The Herbert/Whipple screw and the Mini-Acutrak screw were found to have nearly identical compression capabilities and provided more compression than the cortical screw. The AO/ASIF cannulated screw when used with a support screw demonstrated a compressive capacity twice that of the 2.0 mm cortical screw and higher than the headless Mini-Acutrak and Herbert/Whipple screws. The Mini-Acutrak screw produced about 70% of compression of the cancellous screw in spite of having a diameter almost half that of the cancellous screw. The Herbert/Whipple screw in spite of its larger size compared to the Mini-Acutrak produced almost the same amount of compression. 相似文献
19.
Srinivas Dwarakanath Ashish Suri Bhavani Shankar Sharma 《Indian Journal of Orthopaedics》2007,41(4):318-321
Background:
Transarticular screw placement needs highly accurate imaging. We assess the efficacy and accuracy of C1-C2 transarticular screw fixation using neuronavigation and also cast a technical note on the procedure.Materials and Methods:
This study included a total of nine patients who underwent transarticular screw fixation using the neuronavigation system. A total of 15 screws were placed. All patients underwent postoperative CT scan with 3-Dimensional (3-D) reconstruction to check for the accuracy of implantation.Results:
One patient had encroachment of the transverse foramen but there was no vertebral artery injury. There were no clinical complications or adverse sequelae.Conclusion:
Neuronavigation is extremely helpful in C1-C2 transarticular screw fixation and gives excellent accuracy. 相似文献20.
Jairamchander Pingle 《Indian Journal of Orthopaedics》2014,48(1):25-29