Transition from Failing Dentition to Full‐Arch Fixed Implant‐Supported Prosthesis with a Staged Approach Using Removable Partial Dentures: A Case Series

The present retrospective case series is aimed at evaluating a staged approach using a removable partial denture (RPD) as an interim prosthesis in treatment to correct a failing dentition until such time as a full‐arch fixed implant‐supported prosthesis may be inserted. Eight patients, who had undergone maxillary full‐arch rehabilitation with dental implants due to poor prognosis of their dentitions, were analyzed. All treatment included initial periodontal therapy and a strategic order of extraction of hopeless teeth. An RPD supported by selected teeth rehabilitated the compromised arch during implant osseointegration. These remaining teeth were extracted prior to definitive prosthesis delivery. Advantages and drawbacks of this technique were also recorded for the cases presented. Among the advantages provided by the staged approach are simplicity of fabrication, low cost, and ease of insertion. Additionally, RPD tooth support prevented contact between the interim prosthesis and healing abutments, promoting implant osseointegration. The main drawbacks were interference with speech and limited esthetic results. Implant survival rate was 100% within a follow‐up of at least 1 year. The use of RPDs as interim prostheses allowed for the accomplishment of the analyzed rehabilitation treatments. It is a simple treatment alternative for patients with a low smile line.     

Fabrication of an Implant‐Supported Fixed Interim Prosthesis Using a Duplicate Denture: An Alternative Technique

The fabrication of an implant‐supported fixed complete denture prosthesis involves multiple clinical and laboratory steps. One of the main steps is to provide the patient with an interim fixed prosthesis to evaluate the patient's esthetic and functional needs as well as to enhance the patient's psychology before proceeding to the definitive prosthesis. Different techniques for fabricating interim prostheses have been described in the literature. This report describes an alternative technique that uses a duplicate denture made of self‐curing acrylic resin to fabricate an implant‐supported fixed interim prosthesis. The interim prosthesis was later used as a blueprint for the definitive implant‐supported hybrid prosthesis.     

Management of a Fractured Multiunit Maxillary Implant‐Supported Fixed Prosthesis with Stripped Abutment Screws Using a Hybrid Cement‐Retained and Screw‐Retained Design: A 5‐Year Follow‐Up Clinical Report

Fracture and loosening of implant‐supported prostheses (ISPs) are complications encountered in routine dental practice. In the present report, management of a fractured maxillary full‐arch cement‐retained (CR) fixed dental prosthesis supported by six implants is presented. Due to stripped screws, complications were encountered that prevented the retrieval of two of the six abutment screws, which was managed by using a hybrid retention approach, whereby a single full‐arch CR and screw‐retained (SR) ISP was used. The techniques used to successfully retrieve four of the abutment screws are described. The final retention design involved a combination of three CR and three SR restorations, which offers the advantages of both retention designs.     

A 30‐Year Follow‐Up of a Patient with Mandibular Complete‐Arch Fixed Implant‐Supported Prosthesis on 4 Implants: A Clinical Report

Mandibular complete‐arch fixed implant‐supported prostheses are recognized as one of the earliest and most popular prostheses in implant dentistry. This prosthesis was the main focus in the early era of osseointegration. Despite its widespread popularity, few clinical reports have described long‐term follow‐up greater than 10 years for this type of prosthesis. This report describes a 30‐year follow‐up of a patient who underwent treatment for a mandibular complete‐arch fixed implant‐supported prosthesis with 4 machined surfaced implants, opposing a maxillary complete denture. This report documents a variety of photographs and radiographs taken over a period of 30 years to compare bone levels at various stages of care and maintenance, including de novo bone formation underneath the distal cantilevers due to functional loading. The biologic and biomechanical response to this treatment protocol and long‐term clinical observations and prosthodontic outcome and maintenance needs are also addressed.     

Individual Lithium Disilicate Crowns in a Full‐Arch,Implant‐Supported Rehabilitation: A Clinical Report

This clinical report presents the clinical outcome of a maxillary full‐arch implant‐supported fixed rehabilitation with lithium disilicate reinforced glass ceramic monolithic crowns opposing a mandibular metal‐acrylic implant‐supported fixed rehabilitation in a 62‐year‐old woman. Eight implants were successfully placed (four maxillary, four mandibular), and no complications occurred in the postoperative or maintenance periods. Six months after delivery, the maxillary and mandibular prostheses were found to be clinically, biologically, and mechanically stable, and the patient was satisfied with the esthetics and her ability to function. Although the present indications for the use of lithium disilicate are still restricted to tooth‐borne restorations, it is possible to successfully rehabilitate edentulous patients through implant‐supported fixed prostheses using lithium disilicate reinforced glass ceramic monolithic crowns.     

Simplifying Prosthetic Procedures while Converting an Interim Maxillary Removable Complete Denture to an Interim Implant‐Supported Fixed Complete Denture

This article describes a method of converting an interim maxillary removable complete denture to an interim implant‐supported fixed complete denture. The advantages of this method are that it provides the opportunity to evaluate the patient's function and esthetics, and helps the accurate transfer of the maxillomandibular relationship to the laboratory. Consequently, the fabrication of the definitive prostheses is accurate, and the final result is predictable.     

The Dentoalveolar Prosthesis: A Novel Approach in the Reconstruction of Hard and Soft Tissue Deficiencies

A clinical problem commonly encountered by the advanced restorative dentist is a requirement to replace missing teeth and the supporting alveolus in areas adjacent to healthy or manageable dentition. A potential solution could utilize a dentoalveolar prosthesis fabricated on two or more implants in the edentulous area. The implant substructure, or framework, may be cast, milled, or selectively laser melted from a variety of metals. A superstructure, or ceramic overlay incorporating a ceramic or composite resin gingival tissue component, is constructed to fit over the implant substructure and luted to the substructure with resin cement. This implant‐supported fixed dental prosthesis identifies a solution for the replacement of both teeth and supporting alveolar bone. It restores comfort, function, and esthetics to the patient.     

A Simplified Technique for Creating a Customized Gingival Emergence Profile for Implant‐Supported Crowns

A successful implant restoration is one that will allow adequate function and esthetics. Soft‐tissue management around implant‐supported restorations continues to present a considerable challenge for the restoring dentist as well as the laboratory technician while fabricating the final prosthesis. This article presents a simplified and economical technique to direct gingival tissue healing, as well as create a removable gingival replica of the customized gingival emergence profile. The created profile can then be used in the dental laboratory to achieve a superior and predictable esthetic outcome for implant‐supported fixed restorations.     

The implant-supported milled-bar mandibular overdenture

Osseointegrated dental implants have been proven successful in the treatment of edentulism. The predictability of the implant‐supported prosthesis has also been established. Several techniques have been described for the successful restoration of the edentulous mandible: fixed‐detachable prostheses with either the original Brånemark hybrid prosthesis design or conventional implant‐supported fixed partial dentures, implant‐retained overdentures, and implant‐supported overdentures. However, in cases of advanced ridge resorption in which facial tissue support is needed from the flanges of the prosthesis or when a removable type of prosthesis is preferred by the patient, an implant‐supported prosthesis is indicated. Electric discharge machining is often used in the fabrication of the bar for an implant‐supported overdenture. This procedure is very costly and technique sensitive. An alternative procedure to fabricate a milled‐bar implant‐supported overdenture is described. This procedure is simple and uses inexpensive equipment and materials. The milled‐bar minimizes lateral and rotational displacement. The overdenture incorporates attachments that provide retention, minimizing possible movement along the path of insertion. This type of prosthesis is available to a broad patient population, especially those with advanced ridge resorption, providing an excellent result at a reduced cost.     

An Alternative Design to Overcome the Problem of Unfavorable Implant Angulations for a Screw‐Retained,Implant‐Supported Fixed Prosthesis: Two Clinical Reports

Two clinical reports present an alternative design to address the problem of unfavorable implant angulations if a screw‐retained prosthesis is desired. The restorations were designed as screw‐retained prostheses, except in the area with the unfavorable implant screw emergence. The frameworks in these areas were customized to receive individual cement‐retained crowns. This design offers retrievability and helps to minimize complications associated with excess cement without compromising the functional or esthetic outcome.     

Prospective 10‐Year Cohort Study Based on a Randomized,Controlled Trial (RCT) on Implant‐Supported Full‐Arch Maxillary Prostheses. Part II: Prosthetic Outcomes and Maintenance

Background: Long‐term follow‐up studies (i.e., over 5 years), focusing on prosthetic outcomes and maintenance of implant‐supported reconstructions in the edentulous maxilla, are scarce in the literature. Purpose: The purpose of this study was to evaluate and report 10‐year data on outcomes and maintenance of screw‐retained implant‐supported full‐arch casted titanium‐resin prostheses in the edentulous maxilla. Materials and Methods: In the randomized control trial cohort of 24 patients, the outcome and maintenance of 23 bridges were registered. Results: One patient dropped out of the study prior to the 10‐year control. Of the 23 remaining patients, 21 still had their original frameworks; one framework fractured after 8 years and one was remade after 7 years to create better support for the acrylic. The remaining 23 prostheses showed criteria of success, survival, and failure in 9, 82, and 9%, respectively. Tightening of two assembly screws was necessary in one patient. No detrimental effects were seen because of long cantilever extensions or opposing dentition. A total of 4.7 resin‐related complications per prosthesis were observed; tooth fracture was the most common prosthetic complication. There was an indication of greater prevention in the number of resin‐related complications with the use of lingual gold onlay compared with a resilient mouth guard, 0.71 and 1.67, respectively per bridge. The bridges were removed and reinserted 0.83 times per patient. No abutment or abutment screw fractures were registered. Conclusion: Fracture or wear of the reconstruction materials were considered predictable risks when using resin‐based suprastructure materials. Status of opposing dentition and length of cantilevers did not confer additional risk. The use of a lingual gold onlay indicated prevention of resin‐related complications. Future research should focus on the suprastructure materials to predict better overall treatment results of implant‐supported full‐arch bridges in the edentulous maxilla.     

Maximum bite force following unilateral implant‐supported prosthetic treatment: within‐subject comparison to opposite dentate side

Bite force is a significant component of chewing and masticatory function. The literature lacks studies that compare bite force values of implant‐supported fixed bridges to natural dentition within same subjects. The objective of the study was to assess maximum occlusal bite force (MBF) among patients with an implant‐supported fixed prosthesis and compare it to their opposite dentate side and also to determine the effect of gender, age and Body Mass Index (BMI) on maximum occlusal bite force. Forty patients (20 males and 20 females, mean age = 42·7 ± 9·6 years) with an implant‐supported fixed prosthetic rehabilitation on one side and dentate on the other side were recruited into this study. Participants' MBF were measured bilaterally at the first molar region using a digital hydraulic occlusal force gauge (GM10). The measurements were repeated three times (with 45 s intervals between times) for each side, and the highest value of the bite force (MBF) was recorded for each side. The mean MBF was 577·9 N at the implant‐supported prosthesis side and 595·1 N at the dentate side. The average MBF was higher at the dentulous side (P < 0·05). Maximum occlusal bite force was higher in males and participants with higher weight and height. However, BMI was not significantly related to MBF values. Maximum occlusal bite force values at the dentate side were slightly (3%) but significantly higher than MBF at implant‐supported prosthesis side. Males, taller patients and patients with higher weights had higher MBF values. Body mass index was not significantly related to MBF values.     

A Novel Approach for Converting a Mandibular Complete Denture to a Fixed Interim,Screw‐Retained Implant Prostheses: A Case Report

For most of the last century, conventional complete dentures have been the standard of care and the most common treatment for edentulous patients. Technological advancements in fabrication techniques may significantly reduce the number of office visits required to fabricate complete dentures. Immediate occlusal loading with mandibular full arch prostheses has been extensively researched and is now one of the standards of care for edentulous patients. A clinical technique for converting a mandibular immediate complete denture to an interim full arch, screw‐retained fixed prosthesis with novel implant restorative components for immediate loading on four implants is described.     

Stabilization of a Computer‐Aided Implant Surgical Guide Using Existing Dental Implants with Conversion of an Overdenture to a Fixed Prosthesis

This clinical report describes a technique to stabilize a computer‐aided dental implant surgical guide to existing implants. A patient requested conversion of her existing mandibular implant‐assisted overdenture into a fixed complete denture. The surgical procedure was planned virtually, and the two existing dental implants were integrated into the surgical plan as a means to fixate the surgical guide. The implants were placed, and the patient's prosthesis was converted into an interim fixed complete denture.     

Attachment‐Retained Gingival Prosthesis for Implant‐Supported Fixed Dental Prosthesis in the Maxilla: A Clinical Report

The rehabilitation of edentulous maxillae is a complex procedure due to the involvement of esthetic and functional requirements. A trial maxillary denture can be used to identify the need for adequate upper lip support when replacing removable complete dentures by implant‐fixed dental prostheses. This clinical report describes the outcome of the rehabilitation of an edentulous atrophic maxilla with unfavorable maxillomandibular relationship and deficient upper lip support. A trial denture was fabricated and used to diagnose the need for a prosthesis capable of restoring the upper lip support. The reduced upper lip support was also confirmed by a lateral cephalogram. The patient was rehabilitated by an implant‐fixed dental prosthesis associated with an attachment‐retained gingival prosthesis. The case presented shows that when loss of upper lip support is detected and the patient does not wish to undergo further surgical reconstruction procedure, the retention of a gingival prosthesis using a ball attachment is a satisfactory treatment option.     

Clinical outcomes and cost effectiveness of computer‐guided versus conventional implant‐retained hybrid prostheses: A long‐term retrospective analysis of treatment protocols

1 Background

Computer‐guided systems were developed to facilitate implant placement at optimal positions in relation to the future prosthesis. However, the time, cost and, technique sensitivity involved with computer‐guided surgery impedes its routine practice. The aim of this study is to evaluate survival rates and complications associated with computer‐guided versus conventional implant placement in implant‐retained hybrid prostheses. Furthermore, long‐term economic efficiency of this approach was assessed.

2 Methods

Patients were stratified according to implant placement protocol into a test group, using computer‐guided placement, and a control group, using traditional placement. Calibrated radiographs were used to measure bone loss around implants. Furthermore, the costs of the initial treatment and prosthetic complications, if any, were standardized and analyzed.

3 Results

Forty‐five patients (149 implants in the test group and 111 implants in the control group) with a minimum follow‐up of 5 years, and a mean follow‐up of 9.6 years, were included in the study. While no significant difference was found between both groups in terms of biologic and technical complications, lower incidence of implant loss was observed in the test group (P < 0.001). A statistically significant difference in favor of the non‐guided implant placement group was found for the initial cost (P < 0.05) but not for the prosthetic complications and total cost (P > 0.05).

4 Conclusions

Computer‐guided implant placement for an implant‐supported hybrid prosthesis is a valid, reliable alternative to the traditional approach for implant placement and immediate loading. Computer‐guided implant placement showed higher implant survival rates and comparable long‐term cost to non‐guided implant placement.     

无牙颌种植固定修复术后并发症的反思与总结

无牙颌种植固定修复已经有40余年历史,种植体长期成功率大于90%,而其修复体失败率通常高于种植体。无牙颌种植修复术后严重的机械、生物并发症是影响修复成功的重要因素。因此,临床医生需要了解种植固定修复并发症的发生率和类型,以便向患者提供基于循证证据的治疗方案以及不同修复的优势及风险信息。该文将结合临床经验以及国内外文献对种植修复术后并发症进行探讨。     

Maxillary cement retained implant supported monolithic zirconia prosthesis in a full mouth rehabilitation: a clinical report

This clinical report presents the reconstruction of a maxillary arch with a cement retained implant supported fixed prosthesis using a monolithic zirconia generated by CAD/CAM system on eight osseointegrated implants. The prosthesis was copy milled from an interim prosthesis minimizing occlusal adjustments on the definitive prosthesis at the time of delivery. Monolithic zirconia provides high esthetics and reduces the number of metal alloys used in the oral cavity.