Generation of a new congenic mouse strain to test the relationships among serum insulin-like growth factor I, bone mineral density, and skeletal morphology in vivo.

Insulin-like growth factor (IGF) I is a critical peptide for skeletal growth and consolidation. However, its regulation is complex and, in part, heritable. We previously indicated that changes in both serum and skeletal IGF-I were related to strain-specific differences in total femoral bone mineral density (BMD) in mice. In addition, we defined four quantitative trait loci (QTLs) that contribute to the heritable determinants of the serum IGF-I phenotype in F2 mice derived from progenitor crosses between C3H/HeJ (C3H; high total femoral BMD and high IGF-I) and C57BL/6J (B6; low total femoral BMD and low IGF-I) strains. The strongest QTL, IGF-I serum level 1 (Igflsl-1; log10 of the odds ratio [LOD] score, approximately 9.0), is located on the middle portion of chromosome (Chr) 6. For this locus, C3H alleles are associated with a significant reduction in serum IGF-I. To test the effect of this QTL in vivo, we generated a new congenic strain (B6.C3H-6T [6T]) by placing the Chr 6 QTL region (D6Mit93 to D6Mit150) from C3H onto the B6 background. We then compared serum and skeletal IGF-I levels, body weight, and several skeletal phenotypes from the N9 generation of 6T congenic mice against B6 control mice. Female 6T congenic mice had 11-21% lower serum IGF-I levels at 6, 8, and 16 weeks of age compared with B6 (p < 0.05 for all). In males, serum IGF-I levels were similar in 6T congenics and B6 controls at 6 weeks and 8 weeks but were lower in 6T congenic mice at 16 weeks (p < 0.02). In vitro, there was a 40% reduction in secreted IGF-I in the conditioned media (CMs) from 6T calvaria osteoblasts compared with B6 cells (p < 0.01). Total femoral BMD as measured by peripheral quantitative computed tomography (pQCT) was lower in both 6T male (-4.8%, p < 0.01) and 6T female (-2.3%, p = 0.06) congenic mice. Geometric features of middiaphyseal cortical bone were reduced in 6T congenic mice compared with control mice. Femoral cancellous bone volume (BV) density and trabecular number (Tb.N) were 50% lower, whereas trabecular separation (Tb.Sp) was 90% higher in 8-week-old female 6T congenic mice compared with B6 control mice (p < 0.01 for all). Similarly, vertebral cancellous BV density and Tb.N were lower (-29% and -19%, respectively), whereas Tb.Sp was higher (+29%) in 16-week-old female 6T congenic mice compared with B6 control mice (p < 0.001 for all). Histomorphometric evaluation of the proximal tibia indicated that 6T congenics had reduced BV fraction, labeled surface, and bone formation rates compared with B6 congenic mice. In summary, we have developed a new congenic mouse strain that confirms the Chr 6 QTL as a major genetic regulatory determinant for serum IGF-I. This locus also influences bone density and morphology, with more dramatic effects in cancellous bone than in cortical bone.     

The aged male rat as a model for human osteoporosis: Evaluation by nondestructive measurements and biomechanical testing

Summary Effects of androgen deficiency and androgen replacement on bone density, as measured with dual-energy X-ray absorptiometry (DXA) and single photon absorptiometry (SPA), cortical ratio (cortical thickness/outside bone diameter x 100), and biomechanical properties were evaluated in 14-month-old (1 month after orchiectomy (orch) or sham-operation) and in 17-month-old (4 months after orch or sham) male rats. Whole femoral bone mineral content (BMC) and density (BMD) measured with DXA were not significantly decreased 1 month after orch. Whole femoral BMC and BMD were 10% and 8% lower in 4 months after orch (P < 0.01 andP < 0.001, respectively). This decrease was prevented by testosterone replacement. There was an excellent correlation (R = 0.99) between whole femoral BMC and femoral ash weight. Selective scanning of cortical and cancellous sites of the femur showed that both cancellous and cortical BMC and BMD were significantly decreased 4 months after orch. SPA of the right tibia confirmed a 7% decrease in cancellous BMC and BMD 4 months after orch (preventable by testosterone) but not in cortical BMD and BMC. Femoral cortical ratio decreased with age (47 ± 2 in 14-month-old and 40 ± 2 in 17-month-old sham rats versus 63 ± 1 in 6-month-old male rats) due to a continuously enlarging femoral shaft. Androgen deficiency resulted in an even greater decrease of the cortical ratio 4 months after orch (36 ± 2 in 17-month-old orch rats) that was again prevented by testosterone (47 ± 3). These changes in femoral cortical, cancellous density, and cortical ratio did not affect biomechanical properties of the femur as evaluated by torsion testing. The lack of an effect on bone biomechanics was most likely due to the protection afforded by an increased femoral shaft diameter. We conclude that 4 months after orch, aged male orch rats had a lower femoral cortical and cancellous density and a lower cortical ratio without decrease of biomechanical properties of the femoral shaft. Testosterone replacement was effective not only in preventing the decrease of cancellous and cortical density but also in preventing the age-related thinning of the femoral cortex.     

Effects of Combination Therapy with PTH and 17B-Estradiol on Long Bones of Female Mice

Parathyroid hormone (PTH) is thought to increase trabecular bone mass in postmenopausal women by stimulating osteoblast function. A similar action may contribute to estrogen's protective effect on the skeleton, which we have explored in female mice, in which estrogen induces an exaggerated osteogenic response. In the present investigation, we used this model to determine whether an interaction exists between stimulatory effects of PTH and estrogen on osteoblast function in cancellous bone. An initial dose response study was performed where PTH (hPTH, 1-38) was administered to ten-week-old intact female mice by daily sc injection for 28 days, at doses of 1, 10, 100 microg/kg. In a subsequent study, intact female mice were given PTH and/or 17beta-estradiol (E2) 10 and 40 microg/kg/day respectively. Femoral BMD was assessed by peripheral DXA (PIXImus), and histomorphometry was performed to analyse changes in cancellous and cortical bone. PTH caused a small gain in femoral BMD, and increased the extent of periosteal bone formation surfaces, but had relatively little effect on other skeletal parameters when given alone. As previously found, E2 produced a large increase in femoral BMD, stimulated cancellous and endocortical bone formation, but inhibited periosteal bone formation. In mice treated with combination therapy, a greater increase in femoral BMD was observed compared to that following treatment with either agent alone. No differences in indices of cancellous bone were found between animals treated with E2 compared to the combination group. However, cortical area and periosteal bone formation rate were significantly greater in the latter group. We conclude that PTH and E2 exert an additive effect on bone mass in long bones of female mice, possibly reflecting an ability of PTH to oppose E2-induced suppression of periosteal bone formation.     

Gender specificity in the genetic determinants of peak bone mass.

Peak bone mass is a major determinant of osteoporotic fracture risk. Gender differences in peak bone mass acquisition are well recognized in humans and may account for a substantial share of the increased prevalence of fragility fractures in women compared with men. Skeletal development is regulated by both heritable and environmental factors. Experimental animal models provide a means to circumvent complicating environmental factors. In this study we examined the heritability of peak bone mineral density (BMD) in genetically distinct laboratory mouse strains raised under strict environmental control and sought to identify genetic loci that may contribute to gender differences in this skeletal phenotype. Peak whole body BMD of male and female mice from a panel of 18 recombinant inbred (RI) strains derived from a cross between C57BL/6 and DBA/2 progenitors (BXD) was measured by dual-energy X-ray absorptiometry (DXA). A highly significant relationship existed between body weight and BMD in the BXD RI mice (r2 = 0.25; p = 1 x 10(-43)). To allow for comparison between male and female RI strains, whole body BMD values were corrected for the influence of body weight. The distribution of weight-corrected BMD (WC-BMD) values among the strains indicated the presence of strong genetic influences in both genders, with an estimated narrow sense heritability of 45% and 22% in male and female mice, respectively. Comparison of RI strain results by two-way analysis of variance (ANOVA) revealed a significant strain-by-gender interaction (F1,17,479 = 6.13; p < 0.0001). Quantitative trait locus (QTL) analysis of the BXD RI strain series provisionally identified nine chromosomal sites linked to peak bone mass development in males and seven regions in females. In two cases, the provisional chromosomal loci were shared between genders, but in most cases they were distinct (five female-specific QTLs and six male-specific QTLs). QTL analysis of a genetically heterogeneous F2 population derived from the B6 and D2 progenitor strains provided additional support for the gender specificity of two loci. A significant phenotype-genotype correlation was only observed in male F2 mice at microsatellite marker D7Mit114 on chromosome 7, and a correlation at D2Mit94 on chromosome 2 was only observed in female F2 mice. The present data highlight the important role of gender in the genetic basis of peak bone mass in laboratory mice. Because the male phenotype is associated with considerable fracture risk reduction, an elucidation of the nature of that effect could provide the basis for novel diagnostic, preventative, or therapeutic approaches.     

Age-related changes in trabecular architecture differ in female and male C57BL/6J mice.

We used microCT and histomorphometry to assess age-related changes in bone architecture in male and female C57BL/6J mice. Deterioration in vertebral and femoral trabecular microarchitecture begins early, continues throughout life, is more pronounced at the femoral metaphysis than in the vertebrae, and is greater in females than males. INTRODUCTION: Despite widespread use of mice in the study of musculoskeletal disease, the age-related changes in murine bone structure and the relationship to whole body BMD changes are not well characterized. Thus, we assessed age-related changes in body composition, whole body BMD, and trabecular and cortical microarchitecture at axial and appendicular sites in mice. MATERIALS AND METHODS: Peripheral DXA was used to assess body composition and whole body BMD in vivo, and microCT and histomorphometry were used to measure trabecular and cortical architecture in excised femora, tibia, and vertebrae in male and female C57BL/6J mice at eight time-points between 1 and 20 mo of age (n = 6-9/group). RESULTS: Body weight and total body BMD increased with age in male and female, with a marked increase in body fat between 6 and 12 mo of age. In contrast, trabecular bone volume (BV/TV) was greatest at 6-8 wk of age and declined steadily thereafter, particularly in the metaphyseal region of long bones. Age-related declines in BV/TV were greater in female than male. Trabecular bone loss was characterized by a rapid decrease in trabecular number between 2 and 6 mo of age, and a more gradual decline thereafter, whereas trabecular thickness increased slowly over life. Cortical thickness increased markedly from 1 to 3 mo of age and was maintained or slightly decreased thereafter. CONCLUSIONS: In C57BL/6J mice, despite increasing body weight and total body BMD, age-related declines in vertebral and distal femoral trabecular bone volume occur early and continue throughout life and are more pronounced in females than males. Awareness of these age-related changed in bone morphology are critical for interpreting the skeletal response to pharmacologic interventions or genetic manipulation in mice.     

Site and gender specificity of inheritance of bone mineral density.

Differences in genetic control of BMD by skeletal sites and genders were examined by complex segregation analysis in 816 members of 147 families with probands with extreme low BMD. Spine BMD correlated more strongly in male-male comparisons and hip BMD in female-female comparisons, consistent with gender- and site-specificity of BMD heritability. INTRODUCTION: Evidence from studies in animals and humans suggests that the genetic control of bone mineral density (BMD) may differ at different skeletal sites and between genders. This question has important implications for the design and interpretation of genetic studies of osteoporosis. METHODS: We examined the genetic profile of 147 families with 816 individuals recruited through probands with extreme low BMD (T-score < -2.5, Z-score < -2.0). Complex segregation analysis was performed using the Pedigree Analysis Package. BMD was measured by DXA at both lumbar spine (L1-L4) and femoral neck. RESULTS: Complex segregation analysis excluded purely monogenic and environmental models of segregation of lumbar spine and femoral neck BMD in these families. Pure polygenic models were excluded at the lumbar spine when menopausal status was considered as a covariate, but not at the femoral neck. Mendelian models with a residual polygenic component were not excluded. These models were consistent with the presence of a rare Mendelian genotype of prevalence 3-19%, causing high BMD at the hip and spine in these families, with additional polygenic effects. Total heritability range at the lumbar spine was 61-67% and at the femoral neck was 44-67%. Significant differences in correlation of femoral neck and lumbar spine BMD were observed between male and female relative pairs, with male-male comparisons exhibiting stronger lumbar spine BMD correlation than femoral neck, and female-female comparisons having greater femoral neck BMD correlation than lumbar spine. These findings remained true for parent-offspring correlations when menopausal status was taken into account. The recurrence risk ratio for siblings of probands of a Z-score < -2.0 was 5.4 at the lumbar spine and 5.9 at the femoral neck. CONCLUSIONS: These findings support gender- and site-specificity of the inheritance of BMD. These results should be considered in the design and interpretation of genetic studies of osteoporosis.     

Quantitative trait loci for femoral and lumbar vertebral bone mineral density in C57BL/6J and C3H/HeJ inbred strains of mice.

Significant differences in vertebral (9%) and femoral (50%) adult bone mineral density (BMD) between the C57BL/6J (B6) and C3H/HeJ (C3H) inbred strains of mice have been subjected to genetic analyses for quantitative trait loci (QTL). Nine hundred eighty-six B6C3F2 females were analyzed to gain insight into the number of genes that regulate peak BMD and their locations. Femurs and lumbar vertebrae were isolated from 4-month-old B6C3F2 females at skeletal maturity and then BMD was determined by peripheral quantitative computed tomography (pQCT). Estimates of BMD heritability were 83% for femurs and 72% for vertebrae. Genomic DNA from F2 progeny was screened for 107 polymerase chain reaction (PCR)-based markers discriminating B6 and C3H alleles on all 19 autosomes. The regression analyses of markers on BMD revealed ten chromosomes (1, 2, 4, 6, 11, 12, 13, 14, 16, and 18) carrying QTLs for femurs and seven chromosomes (1, 4, 7, 9, 11, 14, and 18) carrying QTLs for vertebrae, each with log10 of the odds ratio (LOD) scores of 2.8 or better. The QTLs on chromosomes (Chrs) 2, 6, 12, 13, and 16 were unique to femurs, whereas the QTLs on Chrs 7 and 9 were unique to vertebrae. When the two bone sites had a QTL on the same chromosome, the same marker had the highest, although different, LOD score. A pairwise comparison by analysis of variance (ANOVA) did not reveal significant gene x gene interactions between QTLs for either bone site. BMD variance accounted for by individual QTLs ranged from 1% to 10%. Collectively, the BMD QTLs for femurs accounted for 35.1% and for vertebrae accounted for 23.7 % of the F2 population variances in these bones. When mice were homozygous c3/c3 in the QTL region, 8 of the 10 QTLs increased, while the remaining two QTLs on Chrs 6 and 12 decreased, femoral BMD. Similarly, when mice were homozygous c3/c3 in the QTL region for the vertebrae, five of the seven QTLs increased, while two QTLs on Chrs 7 and 9 decreased, BMD. These findings show the genetic complexity of BMD with multiple genes participating in its regulation. Although 5 of the 12 QTLs are considered to be skeleton-wide loci and commonly affect both femurs and vertebrae, each of the bone sites also exhibited unique QTLs. Thus, the BMD phenotype can be partitioned into its genetic components and the effects of these loci on normal bone biology can be determined. Importantly, the BMD QTLs that we have identified are in regions of the mouse genome that have known human homology, and the QTLs will become useful experimental tools for mechanistic and therapeutic analyses of bone regulatory genes.     

Genetic effects on bone loss in peri- and postmenopausal women: a longitudinal twin study.

This longitudinal twin study was designed to assess the heritability of bone loss in peri- and postmenopausal women. A sample of 724 female twins was studied. Baseline and repeat BMD measurements were performed. Results of genetic model-fitting analysis indicated genetic effects on bone loss account for approximately 40% of the between-individual variation in bone loss at the lumbar spine, forearm, and whole body. INTRODUCTION: BMD and bone loss are important predictors of fracture risk. Although the heritability of peak BMD is well documented, it is not clear whether bone loss is also under genetic regulation. This study was designed to assess the heritability of bone loss in peri- and postmenopausal women. MATERIALS AND METHODS: A sample of 724 female twins (177 monozygotic [MZ] and 185 dizygotic [DZ] pairs), 45-82 yr of age, was studied. Each individual had baseline BMD measurements at the lumbar spine, hip, forearm, and total body by DXA and at least one repeat measure, on average 4.9 yr later. Change in BMD (DeltaBMD) was expressed as percent of gain or loss per year. Intraclass correlation coefficients for DeltaBMD were calculated for MZ and DZ pairs. Genetic model-fitting analysis was conducted to partition the total variance of DeltaBMD into three components: genetic (G), common environment (C), and specific environment, including measurement error (E). The index of heritability was estimated as the ratio of genetic variance over total variance. RESULTS: The mean annual DeltaBMD was -0.37 +/- 1.43% (SD) per year at the lumbar spine, -0.27 +/- 1.32% at the total hip, -0.77 +/- 1.66% at the total forearm, -0.36 +/- 1.56% at the femoral neck, and -0.16 +/- 0.81% at the whole body. Intraclass correlation coefficients were significantly higher in MZ than in DZ twins for all studied parameters, except at the hip sites. Results of genetic model-fitting analysis indicated that the indices of heritability for DeltaBMD were 0.38, 0.49, and 0.44 for the lumbar spine, total forearm, and whole body, respectively. However, the genetic effect on DeltaBMD at all hip sites was not significant. CONCLUSIONS: These data suggest that, although genetic effects on bone loss with aging are less pronounced than on peak bone mass, they still account for approximately 40% of the between-individual variation in bone loss for the lumbar spine, total forearm, and whole body in peri- and postmenopausal women. These findings are relevant for studies aimed at identification of genes that are involved in the regulation of bone loss.     

Genetic influence on bone phenotypes and body composition: a Swedish twin study

Bone mineral density (BMD), bone size and bone turnover are independent determinants of fractures in elderly. Earlier twin studies of these phenotypes have revealed high heritability for BMD and bone area, and more moderate heritability for bone turnover markers. No previous Scandinavian study has evaluated the genetic and environmental contribution to the variance of these phenotypes, despite the fact that Scandinavian countries have the highest incidence of osteoporotic fractures worldwide. Participants were selected from the Swedish Twin Registry. All intact like-sexed twin pairs born in 1965 or earlier and living in the county of Uppsala were invited to participate. A total of 102 twin pairs (45 monozygotic and 57 dizygotic) accepted the invitation to participate. All twins underwent measurement of BMD and bone area using dual-energy X-ray absorptiometry. Hip geometry was also calculated. Markers for bone formation (osteocalcin) and bone resorption (CrossLaps) were measured in serum. We observed a substantial heritability for BMD at the lumbar spine (0.85; 95 % CI 0.54–0.90), the femoral neck (0.75; 95 % CI 0.62–0.83), and the proximal femur (0.84; 95 % CI 0.74–0.90). The values for bone area were approximately similar to those for BMD. Bone turnover markers had a slightly lower genetic influence with a value of 0.69 (0.53–0.80) for osteocalcin and 0.58 (95 % CI 0.33–0.75) for CrossLaps. As a comparison, the heritabilities of body height and weight were 0.95 and 0.82, respectively. The high heritability on bone phenotypes among Swedish middle-aged and older men and women should encourage further work on the identification of specific genetic pathways. Continuing research in this area could reveal the mechanisms behind the strong genetic susceptibility of bone-related phenotypes.     

Mapping quantitative trait loci that influence femoral cross-sectional area in mice.

Size and shape are critical determinants of the mechanical properties of skeletal elements and can be anticipated to be highly heritable. Moreover, the genes responsible may be independent of those that regulate bone mineral density (BMD). To begin to identify the heritable determinants of skeletal geometry, we have examined femoral cross-sectional area (FCSA) in male and female mice from two inbred strains of mice with divergent FCSA (C57BL/6 [B6] and DBA/2 [D2]), a large genetically heterogeneous population (n = 964) of B6D2F2 mice and 18 BXD recombinant inbred (RI) strains derived from their F2 cross. Femora were harvested from 16-week-old mice and FCSA (bone and marrow space enclosed within the periosteum) was measured at the midshaft by digital image analysis. In all mouse populations examined, FCSA was positively correlated with body weight and weight-corrected FCSA (WC-FCSA) values were normally distributed in the BXD-RI and F2 populations, suggesting polygenic control of this trait. Genome-wide quantitative trait locus (QTL) analysis of the B6D2F2 population revealed regions on four different chromosomes that were very strongly linked to WC-FCSA (chromosomes 6, 8, 10, and X) in both genders. Evidence of gender-specific genetic influences on femoral geometry was also identified at three other chromosomal sites (chromosomes 2, 7, and 12). Supporting evidence for the WC-FCSA QTLs on chromosomes 2, 7, 8, 10, and 12 also was present in the RI strains. Interestingly, none of these WC-FCSA QTLs were identified in our previous QTL analysis of whole body BMD in the same B6D2F2 population. Thus, the genetic determinants of bone size appear to be largely, if not entirely, distinct from those that regulate BMD attainment. The identification of the genes responsible for geometric differences in bone development should reveal fundamentally important processes in the control of skeletal integrity.     

骨质疏松动物实验骨折风险性分析

目的:评价骨质疏松动物模型发生骨折的风险性.方法:健康雌性SD大鼠36只,随机分为实验组和对照组各18只.实验组切除双侧卵巢,对照组仅切开皮肤.于术后2、4、8周两组处死6只大鼠,作松质骨(腰椎)和皮质骨(股骨干)骨密度(BMD)组织形态学和力学测定.结果:与对照组相比,手术组松质骨BMD 2、4、8周均明显下降,2周皮质骨无明显差异,4、8周则明显下降;股骨中段骨皮质厚度变薄;骨小梁体积(TBV)占全部骨组织体积(TTV)的百分比明显减少;成骨细胞和破骨细胞明显增多;股骨最大弯曲载荷、腰椎最大压缩载荷下降.     

Structural adaptation to changing skeletal load in the progression toward hip fragility: the study of osteoporotic fractures.

Longitudinal, dual-energy X-ray absorptiometry (DXA) hip data from 4187 mostly white, elderly women from the Study of Osteoporotic Fractures were studied with a structural analysis program. Cross-sectional geometry and bone mineral density (BMD) were measured in narrow regions across the femoral neck and proximal shaft We hypothesized that altered skeletal load should stimulate adaptive increases or decreases in the section modulus (bending strength index) and that dimensional details would provide insight into hip fragility. Weight change in the approximately 35 years between scan time points was used as the primary indicator of altered skeletal load. "Static" weight was defined as within 5% of baseline weight, whereas "gain" and 'loss" were those who gained or lost >5%, respectively. In addition, we used a frailty index to better identify those subjects undergoing changing in skeletal loading. Subjects were classified as frail if unable to rise from a chair five times without using arm support. Subjects who were both frail and lost weight (reduced loading) were compared with those who were not frail and either maintained weight (unchanged loading) or gained weight (increased loading). Sixty percent of subjects (n = 2,559) with unchanged loads lost BMD at the neck but not at the shaft, while section moduli increased slightly at both regions. Subjects with increasing load (n = 580) lost neck BMD but gained shaft BMD; section moduli increased markedly at both locations. Those with declining skeletal loads (n = 105) showed the greatest loss of BMD at both neck and shaft; loss at the neck was caused by both increased loss of bone mass and greater subperiosteal expansion; loss in shaft BMD decline was only caused by greater loss of bone mass. This group also showed significant declines in section modulus at both sites. These results support the contention that mechanical homeostasis in the hip is evident in section moduli but not in bone mass or density. The adaptive response to declining skeletal loads, with greater rates of subperiosteal expansion and cortical thinning, may increase fragility beyond that expected from the reduction in section modulus or bone mass alone.     

Heritability of Bone Mineral Density in a Multivariate Family-Based Study

There is evidence for a genetic contribution to bone mineral density (BMD×). Different loci affecting BMD have been identified by diverse linkage and genome-wide association studies. We studied the heritability of and the correlations among six densitometric phenotypes and four bone mass/fracture phenotypes. For this purpose, we used a family-based study of the genetics of osteoporosis, the Genetic Analysis of Osteoporosis Project. The primary aim of our study was to examine the roles of genetic and environmental factors in determining osteoporosis-related phenotypes. The project consisted of 11 extended families from Spain. All of them were selected through a proband with osteoporosis. BMD was measured using dual-energy X-ray absorptiometry. The proportion of variance of BMD attributable to significant covariates ranged from 25 % (for femoral neck BMD) to 48 % (for whole-body total BMD). The vast majority of the densitometric phenotypes had highly significant heritability, ranging from 0.252 (whole-body total BMD) to 0.537 (trochanteric BMD) after correcting for covariate effects. All of the densitometric phenotypes showed high and significant genetic correlations (from ?0.772 to ?1.000) with a low bone mass/osteopenia condition (Affected 3). Our findings provide additional evidence on the heritability of BMD and a strong genetic correlation between BMD and bone mass/fracture phenotypes in a Spanish population. Our results emphasize the importance of detecting genetic risk factors and the benefit of early diagnosis and especially therapeutic and preventive strategies.     

Bone Intrinsic Material Properties in Three Inbred Mouse Strains

This study assessed genetically based differences in intrinsic material properties of both cortical and cancellous bone in adult females of three inbred mouse strains [C57BL/6J (B6), DBA/2J (D2), C3H/HeJ (C3)]. These mouse strains have previously been shown to differ in bone mineral content (BMC) and density (BMD). Distal femoral cancellous bone and midshaft cortical bone in femurs and tibias were assessed for intrinsic material properties using nanoindentation technique. The intrinsic material properties tested were modulus (E_b) and hardness (H) of the midshaft femoral and tibial cortical bone cross sections and of cancellous bone in the distal femur. Both femoral and tibial cortical bone intrinsic material properties were different among the three inbred mouse strains. Femoral modulus and tibial hardness in cortical bone and hardness in cancellous bone were either greatest or showed greater trends in C3 mice as compared to both D2 and B6. Cancellous bone modulus was similar among the three mouse strains. With the exception of the D2 mice, the femoral and tibial cortical modulus were similar within each mouse strain. The tibial cortical modulus was smaller than the femoral cortical modulus for D2 mouse strain. The cortical hardness was greater in tibiae compared with that in femora within each mouse strain. The nanoindentation data suggest that cortical and cancellous intrinsic material properties are influenced by the genetic background of the inbred mouse strains. The inbred mouse strain-related intrinsic material property phenotype can be used to locate responsible quantitative trait loci (QTLs) in future studies of recombinant inbred mouse strains.     

Modifiable determinants of bone status in young women

The purpose of this study was to evaluate the contributions of exercise, fitness, body composition, and calcium intake during adolescence to peak bone mineral density and bone structural measurements in young women. University Hospital and 75 healthy, white females in the longitudinal Penn State Young Women's Health Study were included. Body composition, total body, and hip bone mineral density (BMD) were measured by dual-energy X-ray absorptiometry (DXA), exercise scores by sports-exercise questionnaire during ages 12-18 years, and estimated aerobic capacity by bike ergometry. Section modulus values (a measurement of bending strength) cross-sectional area (CSA), subperiosteal width, and cortical thickness were calculated from DXA scan data for the femoral neck and femoral shaft. Calcium intakes were calculated from 39 days of prospective food records collected at 13 timepoints between ages 12 and 20 years; supplemental calcium intakes were included. Section moduli at the femoral neck and shaft were correlated significantly with lean body mass, sports-exercise scores (R(2) = 0.07-0.19, p < 0.05), and aerobic capacity (R(2) = 0.06-0.57, p < 0.05). Sports-exercise scores correlated with BMD at the femoral neck and shaft. Average total daily calcium intake at age 12-20 years ranged from 486 to 1958 mg/day and was not significantly associated with total or regional peak BMD or bone structure measures at 20 years of age. It was shown that achievable levels of exercise and fitness have a favorable effect on BMD and section modulus of the femoral neck and femoral shaft in young adult women, whereas daily calcium intake of >500 mg in female adolescents appears to have little, if any effect.     

Genetic Variations in Bone Density, Histomorphometry, and Strength in Mice

The purpose of this study was to assess breed-related differences in bone histomorphometry, bone biomechanics, and serum biochemistry in three mouse breeds shown to differ in bone mineral density (BMD) (as measured by DXA) and bone mineral content (BMC). Femurs, tibiae, and sera were collected from 16-week-old C3H/HeJ {C3H}, C57BL/6J {BL6}, and DBA/2J {DBA}mice (n = 12/breed). Data collected included BMC and BMD (femora), histomorphometry of cancellous (distal femur) and cortical bone (diaphyseal tibiae and femora), bone strength (femora), and serum alkaline phosphatase (ALP). Consistent with previous reports, BMC and BMD were higher in C3H than in BL6 or DBA mice. The higher BMD in the C3H breed was associated with greater cancellous bone volume, cortical bone area, periosteal bone formation rate, biomechanical strength, and serum ALP. However, mid-diaphyseal total femoral and tibial cross-sectional area and moment of inertia were greatest in BL6, intermediate in C3H, and lowest in DBA mice. The specific distribution of cortical bone in C3H, BL6, DBA mice represents a difference in adaptive response to similar mechanical loads in these breeds. This difference in adaptive response may be intrinsic to the adaptive mechanism, or may be intrinsic to the bone tissue material properties. In either case, the bone-adaptive response to ordinary mechanical loads in the BL6 mice yields bones of lower mechanical efficiency (less stiffness per unit mass of bone tissue) and does not adapt as well as that of the C3H mice where the final product is a bone with greater resistance to bending under load. We suggest that the size, shape, and BMD of the bone are a result of breed-specific genetically regulated cellular mechanisms. Compared with the C3H mice, the lower BMD in BL6 mice is associated with long bones that are weaker because the larger cross-sectional area fails to compensate completely for their lower BMD and BMC. Received: 16 November 1999 / Accepted: 19 April 2000 / Online publication: 27 July 2000     

Genetic regulation of femoral bone mineral density: complexity of sex effect in chromosome 1 revealed by congenic sublines of mice

The findings that sex-specific effects on femoral structure and peak bone mineral density (BMD) are linked to quantitative trait loci (QTL) provide evidence for the involvement of specific genes that contribute to gender variation in skeletal phenotype. Based on previous findings that the BMD QTL in chromosome 1 (Chr 1) exerts a sex-specific effect on femoral structure, we predicted that congenic sublines of mice that carry one or more of the Chr 1 BMD loci would exhibit gender difference in the volumetric BMD (vBMD) phenotype. To test this hypothesis, we compared skeletal parameters of male and female of five C57BL/6J (B6).CAST/EiJ (CAST)-1 congenic sublines of mice that carry overlapping CAST chromosomal segments from the vBMD loci in Chr 1. Femur vBMD measurements were performed by the peripheral quantitative computed tomography in male and female mice at 16 weeks of age. The skeletal phenotype of the C175-185 and C178-185 congenic sublines of mice provided evidence for the presence of the BMD1-4 locus at 178-180 Mb from the centromere. This QTL affects femur vBMD only in female mice. In contrast, CAST chromosomal region carrying BMD1-1 locus increased femur vBMD both in male and female mice. Furthermore, a gender specific effect on BMD of femur mid-shaft region (mid-BMD) was identified at 168-176 Mb in Chr 1 (F=16.49, P=0.0002), while no significant effect was found on total femur BMD (F=2.67, P=0.11). Moreover, this study allowed us to locate a body weight QTL at 168-172 Mb of Chr 1, the effect of this locus was altered in female mice that carry CAST chromosomal segment 168-176 Mb of Chr 1. Based on this study, we conclude that Chr 1 carries at least two vBMD gender-dependent loci; one genetic locus at 178-180 Mb (BMD1-4 locus) which affects both mid-shaft and total femur vBMD in female mice only, and another gender-dependent locus at 168-176 Mb (BMD1-2 locus) which affects femur mid-shaft vBMD in female but not male mice.     

Detrimental effect of oral contraceptives on parameters of bone mass and geometry in a cohort of 248 young women

The aim of this cross-sectional analysis was to examine the skeletal effects of low-dose monophasic oral contraceptive (OC) use in a cohort of 248 young Caucasian women aged 18-24 years. Areal bone mineral density (BMD) of the femoral neck and lumbar spine was evaluated by dual-energy X-ray absorptiometry. Volumetric BMD, bone mineral content (BMC), and bone geometry were assessed in the tibia by peripheral quantitative computed tomography (pQCT). The women were allocated into ever or never OC users, and also into 5 different OC groups according to duration and time of initiation of OC use. Women with >2 years of OC use and OC initiation within 3 years after menarche were characterized by 10% lower femoral neck areal BMD (P<0.001), 5% lower spine areal BMD (not significant, P=0.101), 7% lower distal tibial total BMC (P<0.05), and 6% lower total BMC at the tibial shaft (P<0.05) relative to never users. In addition, women who had ever used OCs had lower bone mass at the femoral neck and tibial shaft, despite similar age, height, weight, BMI, hours of exercise, and calcium intake compared with never users. At the tibial shaft, OC users showed reduced total cross-sectional area, and increased cortical BMD. In conclusion, our data suggest that OC use is associated with a detrimental effect on bone mass in young women, and provide further insight into the pathophysiological mechanisms involved.     

Mapping quantitative trait loci for serum insulin-like growth factor-1 levels in mice

Serum insulin-like growth factor-1 (IGF-1) and femoral bone mineral density (BMD) differ between two inbred strains of mice, C3H/HeJ (C3H) and C57BL/6J (B6), by approximately 30% and 50%, respectively. Similarly, skeletal IGF-1 content, bone formation, mineral apposition, and marrow stromal cell numbers are higher in C3H than in B6 mice. Because IGF-1 and several bone parameters cosegregate, we hypothesize that the serum IGF-1 phenotype has a strong heritable component and that genetic determinants for serum IGF-1 are involved in the regulation of bone mass. We intercrossed (B6 x C3H)F1 hybrids and analyzed 682 F2 female offspring at 4 months of age for serum IGF-1 by radioimmunoassay and femoral BMD by peripheral quantitative computerized tomography (pQCT). Genomic DNA was assayed by polymerase chain reaction (PCR) to determine alleles for 114 Mit markers inherited in F2 mice at average distances of 14 centimorgans (cM) along each chromosome (Chr). Serum IGF-1 levels in the F2 progeny were relatively normal in distribution, but showed a greater range than either progenitor, indicating that serum IGF-1 level is a polygenic trait with an estimated heritability of 52%. Serum IGF-1 correlated with femoral length (r = 0.266, p < 0.0001) and femoral BMD (r = 0.267, p < 0.0001). Whole genome scans for main effects associated with serum IGF-1 levels revealed three significant QTLs (in order of significance) on mouse Chrs 6, 15, and 10. The QTL on Chr 6 showed a significant reduction in IGF-1 associated with increasing C3H allele number, whereas the Chr 15 and Chr 10 loci showed additive effects with increasing C3H allele number. A genome-wide search for interacting marker pairs identified a significant interaction between the Chr 6 QTL and a locus on Chr 11. This interactive effect suggested that when the Chr 11 locus was homozygous for C3H, there was no effect of the Chr 6 locus on serum IGF-1; however, the combination of C3H alleles on Chr 6 with B6 alleles on Chr 11 was associated with reduced serum IGF-1 concentrations. To test this in vivo, we tested congenic mice carrying the Chr 6 QTL region from C3H on a B6 background (B6.C3H-6). Both serum IGF-1 and femoral BMD were significantly lower in female congenic than progenitor B6 mice. In summary, we identified three major QTLs on mouse Chrs 6, 10, and 15, and noted a major locus-locus interaction between Chrs 6 and 11. We named these QTLs IGF-1 serum levels (Igf1sl1 to Igf1sl4). Functional isolation of the Igf1sl1 QTL on Chr 6 for IGF-1 in B6.C3H-6 congenic mice demonstrated effects on both the IGF-1 and BMD phenotypes. The genetic determinants of these Igf1sl QTLs will provide much insight into the regulation of IGF-1 and the subsequent acquisition of peak bone mass.     

Mapping quantitative trait loci for vertebral trabecular bone volume fraction and microarchitecture in mice.

BMD, which reflects both cortical and cancellous bone, has been shown to be highly heritable; however, little is known about the specific genetic factors regulating trabecular bone. Genome-wide linkage analysis of vertebral trabecular bone traits in 914 adult female mice from the F2 intercross of C57BL/6J and C3H/HeJ inbred strains revealed a pattern of genetic regulation derived from 13 autosomes, with 5-13 QTLs associated with each of the traits. Ultimately, identification of genes that regulate trabecular bone traits may yield important information regarding mechanisms that regulate mechanical integrity of the skeleton. INTRODUCTION: Both cortical and cancellous bone influence the mechanical integrity of the skeleton, with the relative contribution of each varying with skeletal site. Whereas areal BMD, which reflects both cortical and cancellous bone, has been shown to be highly heritable, little is known about the genetic determinants of trabecular bone density and architecture. MATERIALS AND METHODS: To identify heritable determinants of vertebral trabecular bone traits, we evaluated the fifth lumbar vertebra from 914 adult female mice from the F2 intercross of C57BL/6J (B6) and C3H/HeJ (C3H) progenitor strains. High-resolution microCT was used to assess total volume (TV), bone volume (BV), bone volume fraction (BV/TV), trabecular thickness (Tb.Th), separation (Tb.Sp), and number (Tb.N) of the trabecular bone in the vertebral body in the progenitors (n = 8/strain) and female B6C3H-F2 progeny (n = 914). Genomic DNA from F2 progeny was screened for 118 PCR-based markers discriminating B6 and C3H alleles on all 19 autosomes. RESULTS AND CONCLUSIONS: Despite having a slightly larger trabecular bone compartment, C3H progenitors had dramatically lower vertebral trabecular BV/TV (-53%) and Tb.N (-40%) and higher Tb.Sp (71%) compared with B6 progenitors (p < 0.001 for all). Genome-wide quantitative trait analysis revealed a pattern of genetic regulation derived from 13 autosomes, with 5-13 quantitative trait loci (QTLs) associated with each of the vertebral trabecular bone traits, exhibiting adjusted LOD scores ranging from 3.1 to 14.4. The variance explained in the F2 population by each of the individual QTL after adjusting for contributions from other QTLs ranged from 0.8% to 5.9%. Taken together, the QTLs explained 22-33% of the variance of the vertebral traits in the F2 population. In conclusion, we observed a complex pattern of genetic regulation for vertebral trabecular bone volume fraction and microarchitecture using the F2 intercross of the C57BL/6J and C3H/HeJ inbred mouse strains and identified a number of QTLs, some of which are distinct from those that were previously identified for total femoral and vertebral BMD. Identification of genes that regulate trabecular bone traits may ultimately yield important information regarding the mechanisms that regulate the acquisition and maintenance of mechanical integrity of the skeleton.