Clonazepam release from core-shell type nanoparticles of poly(epsilon-caprolactone)/poly(ethylene glycol)/poly(epsilon-caprolactone) triblock copolymers

The triblock copolymer based on poly(epsilon-caprolactone) (PCL) as hydrophobic part and poly(ethylene glycol) (PEG) as hydrophilic one was synthesized and characterized. Core-shell type nanoparticles of poly(epsilon-caprolactone)/poly(ethylene glycol)/poly(epsilon-caprolactone) (CEC) block copolymer were prepared by a dialysis technique. According to the amphiphilic characters, CEC block copolymer can self-associate at certain concentration and their critical association concentration (CAC) was determined by fluorescence probe technique. CAC value of the CEC-2 block copolymer was evaluated as 0.0030 g/l. CAC values of CEC block copolymer decreased with the increase of PCL chain length, i.e. the shorter the PCL chain length, the higher the CAC values. From the observation of transmission electron microscopy (TEM), the morphologies of CEC-2 core-shell type nanoparticles were spherical shapes. Particle size of CEC-2 nanoparticles was 32.3+/-17.3 nm as a monomodal and narrow distribution. Particle size, drug loading, and drug release rate of CEC-2 nanoparticles were changed by the initial solvents and the molecular weight of CEC. The degradation behavior of CEC-2 nanoparticles was observed by 1H NMR spectroscopy. It was suggested that clonazepam (CNZ) release kinetics were dominantly governed by diffusion mechanism.     

All-trans-retinoic acid release from core-shell type nanoparticles of poly(epsilon-caprolactone)/poly(ethylene glycol) diblock copolymer

Poly(epsilon-caprolactone)/poly(ethylene glycol) (abbreviated as CE) diblock copolymers were synthesized to make core-shell type nanoparticles for all-trans-retinoic acid (atRA). Fluorescence spectroscopy showed that critical association concentration (CAC) value decreased at higher MW of CE diblock copolymer. Drug loading characteristics were studied under various experimental conditions. Drug contents and loading efficiency increased as the MW of poly(epsilon-caprolactone) (PCL) block of CE and initial drug feeding amount increased. Solvent used and preparation method also affected drug contents and loading efficiency. According to 1H NMR using CDCl3 and D2O, specific peaks of the PCL block and drug appearing in CDCl3, disappeared at D2O, suggesting hydrophobic core with hydrophilic shell formed in water. atRA release was faster at smaller MW of copolymer and lower drug contents. Nanoparticles prepared in DMF showed faster release rate compared with those prepared in THF or acetone. Cytotoxicity of atRA against U87MG, U251MG and U343MG cell lines were increased by nanoencapsulation while empty nanoparticles of CE diblock copolymer were not significantly affected.     

Poly(ethylene oxide)-modified poly(epsilon-caprolactone) nanoparticles for targeted delivery of tamoxifen in breast cancer

This study was carried out to evaluate and compare the biodistribution profile of tamoxifen when administered intravenously (i.v.) as a simple solution or when encapsulated in polymeric nanoparticulate formulations, with or without surface-stabilizing agents. Tamoxifen-loaded, poly(ethylene oxide)-modified poly(epsilon-caprolactone) (PEO-PCL) nanoparticles were prepared by solvent displacement process that allowed in situ surface modification via physical adsorption of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock polymeric stabilizer (Pluronic). The nanoparticles were characterized for particle size and surface charge. Presence of PEO chains on nanoparticle surface was ascertained by electron spectroscopy for chemical analysis (ESCA). In vivo biodistribution studies were carried out in Nu/Nu athymic mice bearing a human breast carcinoma xenograft, MDA-MB-231 using tritiated [(3)H]-tamoxifen as radio-marker for quantification. PEO-PCL nanoparticles with an average diameter of 150-250 nm, having a smooth spherical shape, and a positive surface charge were obtained with the formulation procedure. About 90% drug encapsulation efficiency was achieved when tamoxifen was loaded at 10% by weight of the polymer. Aqueous wettability, suspendability, and ESCA results showed surface hydrophilization of the PCL nanoparticles by the Pluronics. The primary site of accumulation for the drug-loaded nanoparticles after i.v. administration was the liver, though up to 26% of the total activity could be recovered in tumor at 6h post-injection for PEO-modified nanoparticles. PEO-PCL nanoparticles exhibited significantly increased level of accumulation of the drug within tumor with time as well as extended their presence in the systemic circulation than the controls (unmodified nanoparticles or the solution form). Pluronic surfactants (F-68 and F-108) presented simple means for efficient surface modification and stabilization of PCL nanoparticles to achieve preferential tumor-targeting and a circulating drug reservoir for tamoxifen.     

Preparation of poly epsilon-caprolactone nanoparticles containing magnetite for magnetic drug carrier

Magnetic poly epsilon-caprolactone (PCL) nanoparticles were prepared in a well shaped spherical form by the o/w emulsion method. The influence of some preparative variables on the size and surface property was investigated. Nanoparticles were smooth, well individualized and homogeneous in size. The presence of magnetite and its superparamagnetic characteristic were confirmed by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM), respectively. The anti-cancer drug was encapsulated in the magnetic nanoparticle during preparation. A typical release behavior was observed for 30 days. In vitro experiment of magnetic susceptibility under external magnetic field demonstrated that the magnetic PCL nanoparticles have sufficient magnetic susceptibility for a potential magnetic drug carrier for targeted delivery.     

表面修饰紫杉醇纳米粒局部给药抑制血管再狭窄的研究

制备表面修饰紫杉醇纳米粒并观察其抑制兔颈动脉损伤模型新生内膜增生的效果。采用超声乳化-溶剂挥发法制备载紫杉醇纳米粒，用物理吸附法对纳米粒进行表面修饰。对纳米粒进行表征，包封率和体外释放使用高效液相色谱仪进行分析。建立兔颈动脉损伤模型，在血管局部灌注不同浓度的修饰纳米粒。28天后，取出局部给药的颈动脉血管，进行苏木素-伊红(Hematoxylin & Eosin staining，HE)染色和弹力纤维染色。制备的载紫杉醇纳米粒粒径300 nm左右、包封率80%以上且表面带正电荷。体外药物释放呈两相释放。28天后，血管内局部灌注紫杉醇纳米粒悬液可有效抑制血管内皮增生，并呈剂量依赖性。浓度达到30 mg·mL^-1时，可完全抑制血管内膜增生。血管内局部灌注正电荷修饰的紫杉醇纳米粒悬液可有效抑制血管内皮增生，抑制效果随纳米粒悬液浓度的增加而提高。     

Clonazepam release from core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) triblock copolymers

The triblock copolymer based on poly(-caprolactone) (PCL) as hydrophobic part and poly(ethylene glycol) (PEG) as hydrophilic one was synthesized and characterized. Core-shell type nanoparticles of poly(-caprolactone)/poly(ethylene glycol)/poly(-caprolactone) (CEC) block copolymer were prepared by a dialysis technique. According to the amphiphilic characters, CEC block copolymer can self-associate at certain concentration and their critical association concentration (CAC) was determined by fluorescence probe technique. CAC value of the CEC-2 block copolymer was evaluated as 0.0030 g/l. CAC values of CEC block copolymer decreased with the increase of PCL chain length, i.e. the shorter the PCL chain length, the higher the CAC values. From the observation of transmission electron microscopy (TEM), the morphologies of CEC-2 core-shell type nanoparticles were spherical shapes. Particle size of CEC-2 nanoparticles was 32.3±17.3 nm as a monomodal and narrow distribution. Particle size, drug loading, and drug release rate of CEC-2 nanoparticles were changed by the initial solvents and the molecular weight of CEC. The degradation behavior of CEC-2 nanoparticles was observed by ¹H NMR spectroscopy. It was suggested that clonazepam (CNZ) release kinetics were dominantly governed by diffusion mechanism.     

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs accross barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.     

Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery

Poly(alkylcyanoacrylate) (PACA) nanoparticles were first developed 25 years ago taking advantage of the in vivo degradation potential of the polymer and of its good acceptance by living tissues. Since then, various PACA nanoparticles were designed including nanospheres, oil-containing and water-containing nanocapsules. This made possible the in vivo delivery of many types of drugs including those presenting serious challenging delivery problems. PACA nanoparticles were proven to improve treatments of severe diseases like cancer, infections and metabolic disease. For instance, they can transport drugs across barriers allowing delivery of therapeutic doses in difficult tissues to reach including in the brain or in multidrug resistant cells. This review gives an update on the more recent developments and achievements on design aspects of PACA nanoparticles as delivery systems for various drugs to be administered in vivo by different routes of administration.     

Nanoporous multilayer poly(L-glutamic acid)/chitosan microcapsules for drug delivery

Nanoporous poly(L-glutamic acid)/chitosan (PLGA/CS) multilayer microcapsules were fabricated by layer-by-layer (LbL) assembly using the porous silica particles as sacrificial templates. The LbL assembled nanoporous PLGA/CS microcapsules were characterized by Zeta-potential analyzer, FTIR, TGA, SEM, TEM and CLSM. 5-Fluorouracil (5-FU) was chosen as model drug. The drug loading content of PLGA/CS microcapsules depends on loading time, loading temperature, pH value and NaCl concentration. High loading capacity of microcapsules can be achieved by simply adjusting pH value and salt concentration. Moreover, 5-Fu loaded microcapsules take on a sustained release behavior, especially in an acid solution, in contrast to burst release of bare 5-Fu. The kinetics of 5-Fu release from PLGA/CS microcapsules conforms to Korsmeyer-Peppas and Baker-Lonsdale models, the mechanism of which can be ascribed to priority of drug diffusion and subordination of polymer degradation. The MTT cytotoxicity assay in vitro reveals the satisfactory anticancer activity of the drug-loaded PLGA/CS microcapsules. Therefore, the novel nanoporous PLGA/CS microcapsules is expected to find application in drug delivery systems.     

Local drug delivery using poly(lactic-co-glycolic acid) nanoparticles in thermosensitive gels for inner ear disease treatment

Intratympanic (IT) therapies have been explored to address several side effects that could be caused by systemic administration of steroids to treat inner ear diseases. For effective drug delivery to the inner ear, an IT delivery system was developed using poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) and thermosensitive gels to maintain sustained release. Dexamethasone (DEX) was used as a model drug. The size and zeta potential of PLGA NPs and the gelation time of the thermosensitive gel were measured. In vitro drug release was studied using a Franz diffusion cell. Cytotoxicity of the formulations was investigated using SK-MEL-31 cells. Inflammatory responses were evaluated by histological observation of spiral ganglion cells and stria vascularis in the mouse cochlea 24 h after IT administration. In addition, the biodistribution of the formulations in mouse ears was observed by fluorescence imaging using coumarin-6. DEX-NPs showed a particle size of 150.0 ± 3.2 nm in diameter and a zeta potential of −18.7 ± 0.6. The DEX-NP-gel showed a gelation time of approximately 64 s at 37 °C and presented a similar release profile and cytotoxicity as that for DEX-NP. Furthermore, no significant inflammatory response was observed after IT administration. Fluorescence imaging results suggested that DEX-NP-gel sustained release compared to the other formulations. In conclusion, the PLGA NP-loaded thermosensitive gel may be a potential drug delivery system for the inner ear.     

Formulation of spray-dried phenytoin loaded poly(epsilon-caprolactone) microcarrier intended for brain delivery to treat epilepsy

This study evaluates the efficacy of the spray-drying technique in the bioengineering of phenytoin (PHT) containing poly(epsilon-caprolactone) (PCL) microcarrier intended for brain delivery for long-term treatment of epilepsy. Through orthogonally designed experiments, the optimal formulation and process variables for the preparation of PCL-microcarriers containing PHT were obtained. The produced microcarriers were characterized by coulter counter, scanning electron, scanning transmission electron microscopies, differential scanning calorimetry, powder X-ray diffraction, and in vitro release. The results showed that the produced microcarriers have a spherical structure, uniform size distribution, and a particle mean diameter of about 4.0 microm, which is suitable for brain delivery. The PHT was loaded as dispersed microcrystals within the PCL-microcarriers. From this system, PHT was released slowly into a buffer solution for approximately 14 days without any burst effect. These data suggested that PHT containing spray-dried PCL-microcarrier may be a promising drug delivery system for local brain delivery and long-term treatment of pharmacoresistant epilepsy.     

Intratumoral delivery of paclitaxel-loaded poly(lactic-co-glycolic acid) microspheres for Hep-2 laryngeal squamous cell carcinoma xenografts

The introduction of induction chemotherapy provides an expectation of laryngeal function preservation without reduction in survival for patients with advanced laryngeal squamous cell carcinoma. The antitumor activity of conventional intravenous chemotherapy, however, is limited by systemic toxicity. The polymeric drug system delivered locally provides a novel modality of increasing therapeutic concentrations of drug for a prolonged period while decreasing systemic levels. In the current study, paclitaxel-loaded sustained-release microspheres were developed using poly(lactic-co-glycolic acid) as a drug carrier. Intratumoral administration of paclitaxel in the formulation of polymer showed enhanced efficacy against laryngeal squamous cell carcinoma in nude mice compared with conventional paclitaxel injection via the intratumoral or intraperitoneal route. No significant toxic reactions were observed in the experiment. Immunohistochemical findings indicated that paclitaxel exhibited antiangiogenic activity by inhibiting the expression of basic fibroblast growth factor and vascular endothelial growth factor within the tumor. Moreover, this effect could be better exploited via localized delivery of polymeric paclitaxel. In conclusion, direct administration of polymeric drug system at the tumor sites proved to be promising for the treatment of laryngeal carcinoma.     

Synthesis of high loading and encapsulation efficient paclitaxel-loaded poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion

The manufacture of stable paclitaxel-loaded poly(n-butyl cyanoacrylate) (PBCA) nanoparticles containing high loading and encapsulation efficiency simultaneously were achieved in the presence of pluronic F127 via miniemulsion. It was found that both drug loading and encapsulation efficiencies of PBCA nanoparticles prepared by miniemulsion were higher (approximately three times) than those obtained by emulsion with similar paclitaxel content in the feed monomer (1%, w/w). Furthermore, the loading and encapsulation efficiencies increased concurrently (to a maximum of 4 and 80%, respectively) with increasing paclitaxel content and these nanoparticles were spherical in shape and with size near 100 nm. XRD patterns revealed that paclitaxel in particles was distributed in the molecular or amorphous state or in the form of small crystals. The in vitro drug release profile of drug-loaded PBCA nanoparticles prepared from miniemulsion exhibited a gradual release; more than 80% (w/w) of the paclitaxel was released after 96 h.     

Biodegradable poly(epsilon -caprolactone) nanoparticles for tumor-targeted delivery of tamoxifen

To increase the local concentration of tamoxifen in estrogen receptor (ER) positive breast cancer, we have developed and characterized nanoparticle formulation using poly(epsilon -caprolactone) (PCL). The nanoparticles were prepared by solvent displacement method using acetone-water system. Particle size analysis, scanning electron microscopy, zeta potential measurements, and differential scanning calorimetry (DSC) were used for nanoparticle characterization. Biodegradation studies were performed in the presence and absence of Pseudomonas lipase in phosphate-buffered saline (PBS, pH 7.4) at 37 degrees C. Tamoxifen loading over different concentrations was analyzed by high-performance liquid chromatography (HPLC) and the optimum loading concentration was determined. In vitro release studies were performed in 0.5% (w/v) sodium lauryl sulfate (SLS) containing PBS at 37 degrees C. Cellular uptake and distribution of fluorescent-labeled nanoparticles was examined in MCF-7 breast cancer cells. SEM micrographs and Coulter analysis showed nanoparticles with spherical shape and uniform size distribution (250-300 nm), respectively. Zeta potential analysis revealed a positive surface charge of +25 mV on the tamoxifen-loaded formulation. Being hydrophobic crystalline polyester, PCL did not degrade in PBS alone, but the degradation was enhanced by the presence of lipase. The maximum tamoxifen loading efficiency was 64%. Initial burst release of tamoxifen was observed, probably due to significant surface presence of the drug on the nanoparticles. A large fraction of the administered nanoparticle dose was taken up by MCF-7 cells through non-specific endocytosis. The nanoparticles were found in the perinuclear region after 1 h. Results of the study suggest that nanoparticle formulations of selective ER modulators, like tamoxifen, would provide increased therapeutic benefit by delivering the drug in the vicinity of the ER.     

Comparative evaluation of in vitro parameters of tamoxifen citrate loaded poly(lactide-co-glycolide), poly(epsilon-caprolactone) and chitosan nanoparticles

Tamoxifen (TAM), the clinical choice for the antiestrogen treatment of advanced or metastatic breast cancer, was formulated in nanoparticulate carrier systems in the form of poly(lactide-co-glycolide) (PLGA), poly-epsilon-caprolactone (PCL) and chitosan (CS) nanoparticles. The PLGA and PCL nanoparticles were prepared by a nanoprecipitation technique whereas the CS nanoparticles were prepared by the ionic gelation method. Mean particle sizes were under 260 nm for PLGA and PCL nanoparticles and around 400 nm for CS nanoparticles. Polydispersity indices were less than 0.4 for all formulations. Zeta potential values were positive for TAM loaded nanoparticles because of the positive charge of the drug. Drug loading values were significantly higher for PCL nanoparticles when compared to PLGA and CS nanoparticles. All nanoparticle formulations exhibited controlled release properties. These results indicate that TAM loaded PLGA, PCL and CS nanoparticles may provide promising carrier systems for tumor targeting.     

Optimization of paclitaxel-loaded poly (d,l-lactide-co-glycolide-N-p-maleimido benzoic hydrazide) nanoparticles size using artificial neural networks

Abstract

The aim of this study was to find a model using artificial neural networks (ANNs) to predict PLGA-PMBH nanoparticles (NPs) size in preparation by modified nanoprecipitation. The input variables were polymer content, drug content, power of sonication and ratio of organic/aqueous phase (i.e. acetone/water), while the NPs size of PLGA-PMBH was assumed as the output variable. Forty samples of PLGA-PMBH NPs containing anticancer drug (i.e. paclitaxel) were synthesized by changing the variable factors in the experiments. The data modeling were performed using ANNs. The effects of input variables (namely, polymer content, drug content, power of sonication and ratio of acetone/water) on the output variables were evaluated using the 3D graphs obtained after modeling. Contrasting the 3D graphs from the generated model revealed that the amount of polymer (PLGA-PMBH) and drug content (PTX) have direct relation with the size of polymeric NPs in the process. In addition, it was illustrated that the ratio of acetone/water was the most important factor affecting the particle size of PLGA-PMBH NPs provided by solvent evaporation technique. Also, it was found that increasing the sonication power (up to a certain amount) indirectly affects the polymeric NPs size however it was directly affected in higher values.     

Preparation,statistical optimisation and in vitro characterisation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)/poly (lactic-co-glycolic acid) blend nanoparticles for prolonged delivery of teriparatide

The purpose of this study was the preparation, optimisation and in vitro characterisation of PHBV and PLGA blend nanoparticles (NPs) for prolonged delivery of Teriparatide. Double emulsion solvent evaporation technique was employed for the fabrication of NPs. The nanoformulation was optimised using the Box–Behnken methodology. The morphological properties of NPs were assessed by both SEM and transmission electron microscopy (TEM). Encapsulation of Teriparatide within the NPs and lacking of chemical bonds between drug and copolymers were proved by XRPD, FTIR and DSC. The structural stability of Teriparatide after processing was confirmed by fluorescence spectrometry. The average size of optimised NPs was 250.0?nm with entrapment efficiency (EE) of 89.5% and drug loading (DL) of 5.0%. Teriparatide release from optimised NPs led to 64.4% release over 30 days and it showed a diffusion-based mechanism. Based on the favourable results, PHBV/PLGA blend NPs could be a promising candidate for designing a controlled release formulation of Teriparatide.     

Folate-conjugated methoxy poly (ethylene glycol)/poly (L-Alanine) amphiphilic block copolymeric micelles for targeted delivery of paclitaxel

Folate has been used as a targeting moiety of various anticancer agents to increase their cellular uptake within target cells since folate receptors(FR) are vastly overexpressed in many tumors. In this study, amphiphilic block copolymers composed of methoxy poly (ethylene glycol)(MPEG) and poly(L-Alanine)(PALA) were synthesized and then conjugated with folate to produce a folate receptor-targeted drug carrier for tumor-specific drug delivery. The structure of the copolymers was confirmed by ¹HNMR. The CMC values of MPEG-PALA(PLAM) and FOL-PALA-MPEG(FOL-PLAM) were 0.678?×?10^?5?mol/L and 0.864?×?10^?5?mol/L, respectively. The paclitaxel loaded micelles prepared from PLAM and FOL-PLAM both exhibited spherical shapes and nano-scale dimensions. The average diameter, encapsulation efficiency(EE), drug loading efficiency(LC) were 55nm, 80.6%, 20.2% for the PLAM micelles and 75nm, 69.7%, 17.4% for FOL-PLAM micelles. Furthermore, in vitro release study indicated that the release rate of paclitaxel from both drug-loaded micelles was slow and sustained.