Bacteriophage T4 RNA ligase 2 (gp24.1) exemplifies a family of RNA ligases found in all phylogenetic domains

RNA ligases participate in repair, splicing, and editing pathways that either reseal broken RNAs or alter their primary structure. Bacteriophage T4 RNA ligase (gp63) is the best-studied member of this class of enzymes, which includes yeast tRNA ligase and trypanosome RNA-editing ligases. Here, we identified another RNA ligase from the bacterial domain--a second RNA ligase (Rnl2) encoded by phage T4. Purified Rnl2 (gp24.1) catalyzes intramolecular and intermolecular RNA strand joining through ligase-adenylate and RNA-adenylate intermediates. Mutational analysis identifies amino acids required for the ligase-adenylation or phosphodiester synthesis steps of the ligation reaction. The catalytic residues of Rnl2 are located within nucleotidyl transferase motifs I, IV, and V that are conserved in DNA ligases and RNA capping enzymes. Rnl2 has scant amino acid similarity to T4 gp63. Rather, Rnl2 exemplifies a distinct ligase family, defined by variant motifs, that includes the trypanosome-editing ligases and a group of putative RNA ligases encoded by eukaryotic viruses (baculoviruses and an entomopoxvirus) and many species of archaea. These findings have implications for the evolution of covalent nucleotidyl transferases and virus-host dynamics based on RNA restriction and repair.     

Cloning of the cDNA encoding an RNA regulatory protein--the human iron-responsive element-binding protein.

Iron-responsive elements (IREs) are stemloop structures found in the mRNAs encoding ferritin and the transferrin receptor. These elements participate in the iron-induced regulation of the translation of ferritin and the stability of the transferrin receptor mRNA. Regulation in both instances is mediated by binding of a cytosolic protein to the IREs. High-affinity binding is seen when cells are starved of iron and results in repression of ferritin translation and inhibition of transferrin receptor mRNA degradation. The IRE-binding protein (IRE-BP) has been identified as an approximately 90-kDa protein that has been purified by both affinity and conventional chromatography. In this report we use RNA affinity chromatography and two-dimensional gel electrophoresis to isolate the IRE-BP for protein sequencing. A degenerate oligonucleotide probe derived from a single peptide sequence was used to isolate a cDNA clone that encodes a protein containing 13 other sequenced peptides obtained from the IRE-BP. Consistent with previous characterization of the IRE-BP, the cDNA encodes a protein of 87 kDa with a slightly acidic pI, and the corresponding mRNA of approximately 3.6 kilobases is found in a variety of cell types. The encoded protein contains a nucleotide-binding consensus sequence and regions of cysteine and histidine clusters. This mRNA is encoded by a single gene on human chromosome 9, a finding consistent with previous localization by functional mapping. The protein contains no previously defined consensus motifs for either RNA or DNA binding. The simultaneous cloning of a different, but highly homologous, cDNA suggests that the IRE-BP is a member of a distinct gene family.     

Isolation of high-affinity GTP aptamers from partially structured RNA libraries

Aptamers, RNA sequences that bind to target ligands, are typically isolated by in vitro selection from RNA libraries containing completely random sequences. To see whether higher-affinity aptamers can be isolated from partially structured RNA libraries, we selected for aptamers that bind GTP, starting from a mixture of fully random and partially structured libraries. Because stem-loops are common motifs in previously characterized aptamers, we designed the partially structured library to contain a centrally located stable stem-loop. We used an off-rate selection protocol designed to maximize the enrichment of high-affinity aptamers. The selection produced a surprisingly large number of distinct sequence motifs and secondary structures, including seven different aptamers with K(d)s ranging from 500 to 25 nanomolar. The engineered stem-loop was present in the three highest affinity aptamers, and in 12 of 13 independent isolates with a single consensus sequence, suggesting that its inclusion increased the abundance of high-affinity aptamers in the starting pool.     

Evidence for common ancestry of a chestnut blight hypovirulence-associated double-stranded RNA and a group of positive-strand RNA plant viruses.

Computer-assisted analysis of the putative polypeptide products encoded by the two open reading frames present in a large virus-like double-stranded RNA, L-dsRNA, associated with hypovirulence of the chestnut blight fungus, Cryphonectria parasitica, revealed five distinct domains with significant sequence similarity to previously described conserved domains within plant potyvirus-encoded polyproteins. These included the putative RNA-dependent RNA polymerase, RNA helicase, two papain-like cysteine proteases related to the potyvirus helper-component protease, and a cysteine-rich domain of unknown function similar to the N-terminal portion of the potyvirus helper-component protein. Phylogenetic trees derived from the alignment of the polymerase domains of L-dsRNA, a subset of positive-stranded RNA viruses, and double-stranded RNA viruses, using three independent algorithms, suggested that the hypovirulence-associated dsRNA and potyvirus genomes share a common ancestry. However, comparison of the organization of the conserved domains within the encoded polyproteins of the respective viruses indicated that the proposed subsequent evolution involved extensive genome rearrangement.     

Striking similarities in amino acid sequence among nonstructural proteins encoded by RNA viruses that have dissimilar genomic organization.

The plant viruses alfalfa mosaic virus (AMV) and brome mosaic virus (BMV) each divide their genetic information among three RNAs while tobacco mosaic virus (TMV) contains a single genomic RNA. Amino acid sequence comparisons suggest that the single proteins encoded by AMV RNA 1 and BMV RNA 1 and by AMV RNA 2 and BMV RNA 2 are related to the NH2-terminal two-thirds and the COOH-terminal one-third, respectively, of the largest protein encoded by TMV. Separating these two domains in the TMV RNA sequence is an amber termination codon, whose partial suppression allows translation of the downstream domain. Many of the residues that the TMV read-through domain and the segmented plant viruses have in common are also conserved in a read-through domain found in the nonstructural polyprotein of the animal alphaviruses Sindbis and Middelburg. We suggest that, despite substantial differences in gene organization and expression, all of these viruses use related proteins for common functions in RNA replication. Reassortment of functional modules of coding and regulatory sequence from preexisting viral or cellular sources, perhaps via RNA recombination, may be an important mechanism in RNA virus evolution.     

A secondary-structure model for the self-cleaving region of Neurospora VS RNA.

Neurospora VS RNA performs an RNA-mediated self-cleavage reaction whose products contain 2',3'-cyclic phosphate and 5'-hydroxyl termini. This reaction is similar to those of hammerhead, hairpin, and hepatitis delta virus ribozymes; however, VS RNA is not similar in sequence to these other self-cleaving motifs. Here we propose a model for the secondary structure of the self-cleaving region of VS RNA, supported by site-directed mutagenesis and chemical modification structure probing data. The secondary structure of VS RNA is distinct from those of the other naturally occurring RNA self-cleaving domains. In addition to a unique secondary structure, several Mg-dependent interactions occur during the folding of VS RNA into its active tertiary conformation.     

RNA binding determinant in some class I tRNA synthetases identified by alignment-guided mutagenesis.

The N-terminal nucleotide binding folds of all 10 class I tRNA synthetases (RSs) contain characteristic conserved sequence motifs that define this class of synthetases. Sequences of C-terminal domains, which in some cases are known to interact with anticodons, are divergent. In the 676-amino acid Escherichia coli methionyl-tRNA synthetase (MetRS), interactions with the methionine tRNA anticodon are sensitive to substitutions at a specific location on the surface of the C-terminal domain of this protein of known three-dimensional structure. Although four class I synthetases of heterogeneous lengths and unknown structures are believed to be historically related to MetRS, pair-wise sequence similarities in the region of this RNA binding determinant are obscure. A multiple alignment of all sequences of three of these synthetases with all MetRS sequences suggested a location for the functional analog of the anticodon-binding site in these enzymes. We chose a member of this set for alignment-guided mutagenesis, combined with a functional analysis of mutant proteins. Substitutions within two amino acids of the site fixed by the multiple sequence alignment severely affected interactions with tRNA but not with ATP or amino acid. Multiple individual replacements at this location do not disrupt enzyme stability, indicating this segment is on the surface, as in the MetRS structure. The results suggest the location of an RNA binding determinant in each of these three synthetases of unknown structure.     

A protein tyrosine phosphatase-like protein from baculovirus has RNA 5′-triphosphatase and diphosphatase activities

The superfamily of protein tyrosine phosphatases (PTPs) includes at least one enzyme with an RNA substrate. We recently showed that the RNA triphosphatase domain of the Caenorhabditis elegans mRNA capping enzyme is related to the PTP enzyme family by sequence similarity and mechanism. The PTP most similar in sequence to the capping enzyme triphosphatase is BVP, a dual-specificity PTP encoded by the Autographa californica nuclear polyhedrosis virus. Although BVP previously has been shown to have modest tyrosine and serine/threonine phosphatase activity, we find that it is much more potent as an RNA 5′-phosphatase. BVP sequentially removes γ and β phosphates from the 5′ end of triphosphate-terminated RNA, leaving a 5′-monophosphate end. The activity was specific for polynucleotides; nucleotide triphosphates were not hydrolyzed. A mutant protein in which the active site cysteine was replaced with serine was inactive. Three other dual-specificity PTPs (VH1, VHR, and Cdc14) did not exhibit detectable RNA phosphatase activity. Therefore, capping enzyme and BVP are members of a distinct PTP-like subfamily that can remove phosphates from RNA.     

m5C RNA and m5C DNA methyl transferases use different cysteine residues as catalysts

A family of RNA m(5)C methyl transferases (MTases) containing over 55 members in eight subfamilies has been identified recently by an iterative search of the genomic sequence databases by using the known 16S rRNA m(5)C 967 MTase, Fmu, as an initial probe. The RNA m(5)C MTase family contained sequence motifs that were highly homologous to motifs in the DNA m(5)C MTases, including the ProCys sequence that contains the essential Cys catalyst of the functionally similar DNA-modifying enzymes; it was reasonable to assign the Cys nucleophile to be that in the conserved ProCys. The family also contained an additional conserved Cys residue that aligns with the nucleophilic catalyst in m(5)U54 tRNA MTase. Surprisingly, the mutant of the putative Cys catalyst in the ProCys sequence was active and formed a covalent complex with 5-fluorocytosine-containing RNA, whereas the mutant at the other conserved Cys was inactive and unable to form the complex. Thus, notwithstanding the highly homologous sequences and similar functions, the RNA m(5)C MTase uses a different Cys as a catalytic nucleophile than the DNA m(5)C MTases. The catalytic Cys seems to be determined, not by the target base that is modified, but by whether the substrate is DNA or RNA. The function of the conserved ProCys sequence in the RNA m(5)C MTases remains unknown.     

Identification of two functionally redundant RNA elements in the coding sequence of poliovirus using computer-generated design

Genomes of RNA viruses contain multiple functional RNA elements required for translation or RNA replication. We use unique approaches to identify functional RNA elements in the coding sequence of poliovirus (PV), a plus strand RNA virus. The general method is to recode large segments of the genome using synonymous codons, such that protein sequences, codon use, and codon pair bias are conserved but the nucleic acid sequence is changed. Such recoding does not affect the growth of PV unless it destroys the sequence/structure of a functional RNA element. Using genetic analyses and a method called "signal location search," we detected two unique functionally redundant RNA elements (α and β), each about 75 nt long and separated by 150 nt, in the 3'-terminal coding sequence of RNA polymerase, 3D(pol). The presence of wild type (WT) α or β was sufficient for the optimal growth of PV, but the alteration of both segments in the same virus yielded very low titers and tiny plaques. The nucleotide sequences and predicted RNA structures of α and β have no apparent resemblance to each other. In α, we narrowed down the functional domain to a 48-nt-long, highly conserved segment. The primary determinant of function in β is a stable and highly conserved hairpin. Reporter constructs showed that the α- and β-segments are required for RNA replication. Recoding offers a unique and effective method to search for unknown functional RNA elements in coding sequences of RNA viruses, particularly if the signals are redundant in function.     

Conserved Structural Motifs of Two Distant IAV Subtypes in Genomic Segment 5 RNA

The functionality of RNA is fully dependent on its structure. For the influenza A virus (IAV), there are confirmed structural motifs mediating processes which are important for the viral replication cycle, including genome assembly and viral packaging. Although the RNA of strains originating from distant IAV subtypes might fold differently, some structural motifs are conserved, and thus, are functionally important. Nowadays, NGS-based structure modeling is a source of new in vivo data helping to understand RNA biology. However, for accurate modeling of in vivo RNA structures, these high-throughput methods should be supported with other analyses facilitating data interpretation. In vitro RNA structural models complement such approaches and offer RNA structures based on experimental data obtained in a simplified environment, which are needed for proper optimization and analysis. Herein, we present the secondary structure of the influenza A virus segment 5 vRNA of A/California/04/2009 (H1N1) strain, based on experimental data from DMS chemical mapping and SHAPE using NMIA, supported by base-pairing probability calculations and bioinformatic analyses. A comparison of the available vRNA5 structures among distant IAV strains revealed that a number of motifs present in the A/California/04/2009 (H1N1) vRNA5 model are highly conserved despite sequence differences, located within previously identified packaging signals, and the formation of which in in virio conditions has been confirmed. These results support functional roles of the RNA secondary structure motifs, which may serve as candidates for universal RNA-targeting inhibitory methods.     

Biochemical and structural analysis of the NS5B RNA-dependent RNA polymerase of the hepatitis C virus

Hepatitis C virus (HCV), the major causative agent of chronic and sporadic non-A, non-B hepatitis worldwide, is a distinct member of the Flaviviridae virus family. These viruses have in common a plus-strand RNA genome that is replicated in the cytoplasm of the infected cell via minus-strand RNA intermediates. Owing to the lack of reliable cell culture systems and convenient animal models for HCV, the mechanisms governing RNA replication are not known. As a first step towards the development of appropriate in vitro systems, we expressed the NS5B RNA-dependent RNA polymerase (RdRp) in insect cells, purified the protein to near homogeneity and studied its biochemical properties. It is a primer- and RNA template-dependent RNA polymerase able to copy long heteropolymeric templates without additional viral or cellular cofactors. We determined the optimal reaction parameters, the kinetic constants and the substrate specificity of the enzyme, which turned out to be similar to those described for the 3D polymerase of poliovirus. By analysing a series of nucleosidic and non-nucleosidic compounds for their effect on RdRp activity, we found that ribavirin triphosphates have no inhibitory effect, providing direct experimental proof that the therapeutic effect observed in patients is not related to a direct inhibition of the viral polymerase. Finally, mutation analysis was performed to map the minimal NS5B sequence required for enzymatic activity and to identify the 'classical' polymerase motifs important for template and NTP binding and catalysis.     

Self-assembling RNA square

The three-dimensional structures of noncoding RNA molecules reveal recurring architectural motifs that have been exploited for the design of artificial RNA nanomaterials. Programmed assembly of RNA nanoobjects from autonomously folding tetraloop–receptor complexes as well as junction motifs has been achieved previously through sequence-directed hybridization of complex sets of long oligonucleotides. Due to size and complexity, structural characterization of artificial RNA nanoobjects has been limited to low-resolution microscopy studies. Here we present the design, construction, and crystal structure determination at 2.2 Å of the smallest yet square-shaped nanoobject made entirely of double-stranded RNA. The RNA square is comprised of 100 residues and self-assembles from four copies each of two oligonucleotides of 10 and 15 bases length. Despite the high symmetry on the level of secondary structure, the three-dimensional architecture of the square is asymmetric, with all four corners adopting distinct folding patterns. We demonstrate the programmed self-assembly of RNA squares from complex mixtures of corner units and establish a concept to exploit the RNA square as a combinatorial nanoscale platform.     

Definition of a high-affinity Gag recognition structure mediating packaging of a retroviral RNA genome

All retroviral genomic RNAs contain a cis-acting packaging signal by which dimeric genomes are selectively packaged into nascent virions. However, it is not understood how Gag (the viral structural protein) interacts with these signals to package the genome with high selectivity. We probed the structure of murine leukemia virus RNA inside virus particles using SHAPE, a high-throughput RNA structure analysis technology. These experiments showed that NC (the nucleic acid binding domain derived from Gag) binds within the virus to the sequence UCUG-UR-UCUG. Recombinant Gag and NC proteins bound to this same RNA sequence in dimeric RNA in vitro; in all cases, interactions were strongest with the first U and final G in each UCUG element. The RNA structural context is critical: High-affinity binding requires base-paired regions flanking this motif, and two UCUG-UR-UCUG motifs are specifically exposed in the viral RNA dimer. Mutating the guanosine residues in these two motifs--only four nucleotides per genomic RNA--reduced packaging 100-fold, comparable to the level of nonspecific packaging. These results thus explain the selective packaging of dimeric RNA. This paradigm has implications for RNA recognition in general, illustrating how local context and RNA structure can create information-rich recognition signals from simple single-stranded sequence elements in large RNAs.