Uncemented Total Hip Arthroplasty Using a Tapered Femoral Component in Obese Patients: An 18–27 Year Follow-Up Study

The purpose of this study was to evaluate the efficacy of an uncemented tapered femoral component in obese patients at a mean follow-up of 23 years. We retrospectively reviewed 119 consecutive uncemented total hip arthroplasties in 105 obese patients using a tapered femoral component between 1983 and 1987. The mean body mass index of these patients was 34 (range 30–47). Complete clinical and radiographic follow-up was obtained on the 55 hips in 47 patients who survived a minimum of 18 years (range 18–27 years). Three femoral components (6%) have been revised, none for aseptic loosening. One was loose by radiographic criteria. These results demonstrate that an uncemented tapered stem can provide excellent fixation in obese patients out to 27 years.     

Nineteen Year Results of THA Using Modular 9 mm S-ROM Femoral Component in Patients With Small Femoral Canals

A retrospective analysis was undertaken of 30 consecutive THA performed in 25 patients with hypoplastic proximal femurs, who had received a 9-mm uncemented modular S-ROM stem. The mean patient age was 42 years (17–69 years), mean height was 152.5cm (130–170.5 cm), mean weight was 63 kg (39–90 kg), and mean follow-up period was 19 years (range, 12–23 years). Subsidence was seen in 2 hips, with asymptomatic femoral osteolysis present in 11 hips; overall survival of the femoral stem was 93.3%, with two revisions of the femoral component required for aseptic loosening. After a mean follow-up of 19 years, the use of the S-ROM 9 mm femoral stem in the patient with the small femur was associated with a low revision rate due to aseptic loosening of the stem.     

Revision Total Hip Arthroplasty With a Modular Cementless Femoral Stem

We retrospectively reviewed 123 patients who underwent cementless THA with modular femoral stem designs for revision THA or conversion of failed ORIF and found 75 patients available for analysis. The Harris Hip Score (HHS) improved from 52 ± 14 to 86 ± 11 (P < 0.001). The femoral stem was re-revised in eight patients (11%). The mean time to re-revision was 1.1 years (0.13–2.54). Reasons for re-revision included infection (n = 5, 7%), aseptic loosening (n = 2, 3%) and significant pain (n = 1, 1%). There were no failures of the modular junctions. PC stems had an increased rate of intraoperative fractures (PC 28% vs. STS 9%, P = 0.04). Modular cementless femoral stems provide acceptable mid-term results in revision THA.     

Fifteen-year Results of Precoated Femoral Stem in Primary Hybrid Total Hip Arthroplasty

Background

There has been controversy whether methylmethacrylate precoating of the cemented femoral stem is a solution for aseptic loosening or rather contributes to increased failure rates in cemented total hip arthroplasties.

Methods

On a retrospective basis, we analyzed 76 primary hybrid total hip arthroplasties from 63 patients with precoated, cemented femoral stems between October 1990 and December 1995. The mean age of the patients was 46.8 years (range, 22 to 77 years) with a minimum follow-up of 14 years (mean, 15.5 years; range, 14 to 19.5 years). Third generation cementing techniques were employed in all cases.

Results

Twenty-four out of 76 cases (31.6%) showed aseptic loosening of the femoral stems, of which 23 stems were revised at an average revision time of 8 years (range, 3 to 14.8 years). The main mode of loosening was cement-stem interface failure in 22 hips (91.7%). Twenty-one out of 24 failed hips (87.5%) demonstrated C2 cementing grades (p < 0.001). Kaplan-Meier survivorship analysis using radiographic aseptic loosening of the femoral stem as the endpoint for failure showed survival rates of 76.5% at 10 years (95% confidence interval [CI], 71.4 to 81.6) and 63.2% at 19 years (95% CI, 57.3 to 69.1).

Conclusions

An early failure of the precoated femoral stem in this study was mainly due to an insufficient cementing technique. Achievement of good cement mantle may improve the survival rates.     

Aseptic Loosening Rate of the Mayo Femoral Stem With Medium-Term Follow Up

The aseptic loosening rate of the Mayo hip prosthesis femoral stem was determined in a 44 patient (52 hips) series, by comparing preoperative and postoperative clinical and radiographic parameters, over a minimal 5-year postoperative period. Loosening was obvious before five years in four hips (7.6%), while the stem was considered stable in the remaining 48 hips over a mean 6.1 year period, therefore accounting for a 92.3% Kaplan–Meier survival rate. We conclude that the aseptic loosening rate is too high for the Mayo hip prosthesis femoral stem, as compared to literature data concerning the non-conservative stems.     

Cementless Bipolar Hemiarthroplasty Using a Micro-Arc Oxidation Coated Stem in Patients with Displaced Femoral Neck Fractures

Femoral stem fixation for displaced femoral neck fractures in osteoporotic patients is an ongoing debate. We evaluated the outcome of 136 cementless bipolar hemiarthroplasty using a Micro-arc oxidation (MAO) coated stem. All patients survived the procedure and were discharged from the hospital. Thirty- and 90-day mortality rates were 0.7% and 2.2%, respectively. Ninety-eight hips were followed for a minimum of 2 years (mean, 44 months) postoperatively. Three stems were revised because of a periprosthetic fracture. Although cortical stress shielding around the stem was observed in 3 hips, there was no loosening or osteolysis. Cementless bipolar hemiarthroplasty using a MAO-coated stem is a useful and safe option to treat displaced femoral neck fractures.     

Cementless Modular Total Hip Arthroplasty in Patients Younger than Fifty with Femoral Head Osteonecrosis: Minimum Fifteen-Year Follow-Up

This study aimed to report the outcome of total hip arthroplasty (THA) with a modular femoral component in patients younger than fifty years with osteonecrosis of femoral head. Sixty-four osteonecrotic hips in fifty-five patients were available for clinical and radiographic analyses at minimum follow-up of fifteen-years. The mean Harris hip score improved from 36 points preoperatively to 92.7 points at final follow-up. Sixty-two (95.3%) hips demonstrated stable bone ingrowth. No hips showed loosening or required revision for aseptic loosening. Survivorship with an end point of stem revision for any reason was 93.8% and for aseptic loosening was 100% at 16.8 years. We believe that cementless THA with a modular stem is a promising procedure for young and active patients with osteonecrosis of the femoral head.     

Long-Term Survival (up to 34 Years) of Retained Cementless Anatomic Femoral Stem in Patients <50 Years Old

BackgroundThere is a paucity of studies longer than 30 years to determine clinical and radiographic results of retained cementless anatomic stem. The purpose of this study is to determine the long-term (up to 34 years) survival rate of the retained cementless anatomic femoral stem in patients <50 years of age.MethodsIsolated cup revision was performed with retaining primary cementless anatomic femoral stem in 206 patients (149 men and 57 women). Clinical and radiographic results were monitored at each follow-up. At the latest follow-up, computed tomography scans were carried out in all hips to determine the prevalence of osteolysis. The mean follow-up of the retained femoral stem was 30.3 years (range 27-34). The mean follow-up of the revised cup was 25.5 years (range 22-29).ResultsThe mean Harris Hip Score was 91 ± 7.8 points (range 71-100) and the mean Western Ontario and McMaster Universities Osteoarthritis score was 16 ± 7 points (range 7-34) at the final follow-up. The mean University of California, Los Angeles activity score was 7 ± 4 points (range 5-10) at the final follow-up. The overall survival rate of retained cementless femoral stems was 98.9% (95% confidence interval 91-100) at 30.3 years. The survival rate of the revised cup was 93% (95% confidence interval 89-98) at 25.5 years.ConclusionThe rate of aseptic loosening of already osseointegrated femoral stem remains low with ceramic-on-ceramic bearing in young active patients.     

A 5–8 Year Retrospective Follow-Up of the C-Stem AMT Femoral Component: Patient Reported Outcomes and Survivorship Analysis

We report midterm functional, radiographic and survivorship data for the cemented, triple taper C-stem AMT femoral component from a consecutive cohort of 415 hip arthroplasties in 386 patients at a non-developer centre. Follow-up ranges were from 60 to 99 months, with a mean of 76 months. 32 hips were lost to follow-up. The median OHS was 40, median SF-12 mental component score (MCS) was 50, and median SF-12 physical component score (PCS) was 39. At 99 months follow up, stem survivorship is 96.9% (95% confidence interval (CI) 82.5–99.5), and construct survivorship is 96.0% (95% CI 84.2–99.0). Adverse events such as calcar fracture, greater trochanter fracture and dislocation were rare at < 1%. There have been no revisions for aseptic loosening.     

Metal on Metal Total Hip Arthroplasty Using Modular Acetabular Shells

Metal on metal bearings were reintroduced into the United States for use in total hip arthroplasty approximately a decade ago. We evaluated a consecutive series cohort of 148 patients with 169 hips who underwent THR using a metal on metal bearing surface with a modular acetabular shell that had fixation augmentation with dome screws. At 3 to 8 year follow-up, average 4.7 years, only one component was revised (for femoral loosening). 3 hips demonstrated proximal femoral osteolysis and 3 hips demonstrated pelvic osteolysis. The average follow-up Harris Hip Score was 94 (range, 57–100). Although the results have been excellent, we continue to closely monitor these hips for any long term failures, or concerns.     

Long-Term Outcomes of Revision Total Hip Arthroplasty Using a Tapered and Fluted Modular Stem: A Mean Follow-Up of 16 Years

BackgroundTapered modular stems are increasingly used in revision total hip arthroplasty (THA) with deficient femoral bone stock. This study aimed to report the long-term outcomes of revision THA using a tapered and fluted modular stem.MethodsBetween December 1998 and February 2006, 113 revision THAs (110 patients) were performed with a tapered and fluted modular stem at a single institution. Hip radiographs were used to identify stem subsidence, stability, and femoral radiolucency. Final outcomes were assessed in 72 hips (70 patients), with a minimum follow-up of 10 years.ResultsThe mean follow-up duration was 16 years (range, 10-23). At the final evaluation, the Harris Hip Score improved from a mean of 41 points (range, 10-72) preoperatively to 83 points (range, 56-100) (P < .001). Six femoral re-revisions were performed for the following reasons: 1 aseptic loosening, 2 stem fractures, and 3 infections. One stem fracture occurred at the modular junction after 14 years, and the other at a more distal location after 15 years. Stem subsidence was >5 mm in 6 hips (9.1%), but secondary stability was achieved in all stems. Osseointegration was observed in 63 (95.5%) hips. Stem survivorship was 91.1% with an end point of any re-revision and 94.6% for aseptic re-revision.ConclusionA tapered and fluted modular stem demonstrated excellent implant survivorship with reliable bony fixation at a mean follow-up of 16 years. This type of stem can be a durable option for revision THA in patients who have femoral defects.     

Total Hip Arthroplasty Using Highly Cross-Linked Polyethylene in Patients Younger Than 50 Years With Minimum 10-Year Follow-Up

The purpose of this study was to investigate the relatively long-term outcomes in 50 patients (54 hips) younger than 50 years of age who underwent total hip arthroplasty using highly cross-linked polyethylene (HXLPE) liners. With a minimum follow-up of 10 years, mean age at time of surgery was 38.9 years (range, 15–50 years). Survivorship was 100%. There was no radiographic evidence of osteolysis or component loosening. Mean steady-state femoral head penetration rate was 0.020 ± 0.0047 mm/yr. Clinical outcomes were excellent, with mean Harris hip score of 91.2 (range, 72–99) points at final follow-up.     

Short-Term Results of Ultra-Short Anatomic vs Ultra-Short Non-Anatomic Proximal Loading Uncemented Femoral Stems

Background

Question arises as to whether rigid fixation of ultra-short anatomic or ultra-short non-anatomic proximal loading uncemented femoral stem can be obtained without diaphyseal stem fixation. The purpose of this study is to compare the short-term clinical results, radiographic results, revision and survival rates, and complication rates of ultra-short anatomic versus ultra-short non-anatomic uncemented femoral stems.

Satisfactory Results of the Exeter Revision Femoral Stem Used for Primary Total Hip Arthroplasty

Background

The Exeter cemented femoral stem has demonstrated excellent clinical and radiographic outcomes as well as long-term survivorship free from aseptic loosening. A shorter revision stem (125 mm) with a 44 offset became available for the purpose of cement-in-cement revision situations. In certain cases, this shorter revision stem may be used for various primary total hip arthroplasties (THAs) where the standard length stem would require distally reaming the femoral canal. We sought to report on the early to midterm results of this specific stem when used for primary THA regarding (1) clinical and radiographic outcomes, (2) complications, and (3) survivorship.

Cementless Anatomic Total Hip Femoral Component With Circumferential Porous Coating for Hips With Developmental Dysplasia: A Minimum Ten-Year Follow-Up Period

Anatomic femoral components are optimized for primary osteoarthritis, and few long-term results for their use are available for developmental dysplasia of the hip (DDH). We reviewed 135 uncemented total hip arthroplasties in which an anatomic femoral component was used in 106 patients with DDH, excluding femurs with neck–shaft angles of > 160° and femurs with anteversion of > 50°. The mean age of patients at surgery was 49.4 years (range, 33–66 years), and the mean duration of follow-up was 13.5 years (range, 10–18 years). No osteoporotic femurs were included in our study group. Despite 18 acetabular revisions, no femoral component was removed for any reason. No femoral loosening was seen at the final follow-up examination. An anatomic femoral component with circumferential porous coating can produce good clinical and radiologic findings in young patients with good bone quality who have DDH without excessive femoral deformity.     

Midterm Results of a Femoral Stem With a Modular Neck Design: Clinical Outcomes and Metal Ion Analysis

Modular neck femoral stems have a higher-than-anticipated rate of failure in registry results, but large single-center cohort studies are lacking. This is a retrospective cohort of 152 hips implanted with a single titanium stem with a modular titanium neck, presenting clinical, radiographic, and metal ion results at a mean 4.5-year follow-up. Five hips were revised during the study period, for an overall Kaplan–Meier survival of 0.894 at 8 years. There was one modular neck fracture (0.66%), but others demonstrated corrosion or adverse tissue reaction. Serum metal levels demonstrated wide variability. Despite good clinical results in the majority of patients, we confirmed an increased rate of femoral revision at mid-term follow-up, and therefore urge caution in the use of this particular stem design.     

A Modified S-ROM Stem in Primary Total Hip Arthroplasty for Developmental Dysplasia of the Hip

This study examined the clinical outcome of 220 hips in 196 Asian patients who underwent primary total hip arthroplasty (THA) for treatment of developmental dysplasia of the hip (DDH) using a modified S-ROM modular (S-ROM-A) stem designed for Asians, after 2–5 years (mean, 3.3 years) of follow-up. The stem was placed so that the anteversion angle of the neck was decreased against the sleeve in 56% of the hips and increased in 18% of the hips. Bone ingrown fixation was achieved in 99.5% of the hips on X-ray at final follow-up. There were 2 (0.9%) dislocations postoperatively. In primary THA for treatment of DDH accompanied by femoral rotational deformity, the freely-rotatable modular stem provided favorable short-term outcomes by affording both morphological and functional advantages.     

Femoral impaction grafting in revision total hip arthroplasty: a follow-up of 540 hips

Between 1987 and 1999, 540 revision total hip arthroplasties in 487 patients were performed at our institution using the femoral impaction grafting technique with a cemented femoral stem. All patients were prospectively followed up for 2 to 15 years postoperatively with no loss to follow-up. A total of 494 hips remained successfully in situ at an average of 6.7years. The 10-year survival rate was 98.0% (95% confidence interval, 96.2-99.8) with aseptic loosening as the end point and 84.2% (95% confidence interval, 78.5-89.9) for reoperation for any reason. Indication for surgery and the use of any kind of reinforcement significantly influenced outcome (P < .001). This is the largest known series of revision THA with femoral impaction grafting, and the results support continued use of this technique.     

Combined Strut Onlay Allografting,Reduction Osteotomy,and Extensively Porous-Coated Stem for Reconstruction of Severe Femoral Defects During Revision Hip Arthroplasty

BackgroundThe purpose of this study is to determine the long-term (up to 27 years) results of a modified technique applying strut allografts combined with a reduction osteotomy over an extensively porous-coated stem.MethodsWe reviewed the results of 399 revision total hip arthroplasties (for aseptic loosening in 390 hips and septic loosening in 9 hips) in 369 patients (mean age 58 ± 13 years, range 22-65) performed with an extensively porous-coated femoral stem combined with a cortical strut onlay allograft. The mean follow-up was 23 years (range 20-27).ResultsThe mean Harris Hip Score was 84 ± 16 points (range 35-100) at the final follow-up. The mean Western Ontario and McMaster Universities Osteoarthritis Index score was 21 ± 16 points (range 12-53) at the final follow-up. The mean University of California Los Angeles activity score was 6.1 points (range 5-8). A Kaplan-Meier survivorship analysis at 23 years of follow-up showed that the survival rate of the femoral component was 95.5% (95% confidence interval 89-98) with aseptic loosening or revision for any reason and it was 91.5% (95% confidence interval 85-95) if septic loosening was included.ConclusionWe found good results in terms of longevity and functional outcome using this modified technique. Future mechanical studies in addition to controlled clinical studies are warranted.     

Long-Term Results Using the Straight Tapered Femoral Cementless Hip Stem in Total Hip Arthroplasty: A Minimum of Twenty-Year Follow-Up

We report the first long-term results of a prospective cohort study after total hip arthroplasty using the cementless Bicontact hip stem. Between 1987 and 1990, 250 total hip arthroplasties in 236 patients were performed using the cementless Bicontact hip stem. The average follow-up was 22.8 years (20.4–24.8) and average age at index surgery was 58.1 years. Eighty-one patients died and 9 were lost to follow-up. We noted 11 stem revisions revealing an overall Kaplan Meier survival rate of 95.0% (CI 95%: 91.1–97.2%). The average Harris Hip Score revealed 81 points (range 24–93). The Bicontact hip stem demonstrated high survival rates despite high ages and osteopenic changes, which are equivalent to other long-term reports of cementless stem fixation.